Abstract
Emitters of indistinguishable single photons are crucial for the growing field of quantum technologies. To realize scalability and increase the complexity of quantum optics technologies, multiple independent yet identical single-photon emitters are required. However, typical solid-state single-photon sources are inherently dissimilar, necessitating the use of electrical feedback or optical cavities to improve spectral overlap between distinct emitters. Here we demonstrate bright silicon vacancy (SiV−) centres in low-strain bulk diamond, which show spectral overlap of up to 91% and nearly transform-limited excitation linewidths. This is the first time that distinct single-photon emitters in the solid state have shown intrinsically identical spectral properties. Our results have impact on the application of single-photon sources for quantum optics and cryptography.
Similar content being viewed by others
Introduction
Single transform-limited photons are an essential resource1,2,3 for many quantum interference experiments, as indistinguishability between photons allows path-of-origin information to be erased. This makes it possible to investigate fundamental quantum optics phenomena, which have applications in quantum imaging4, quantum computing1 and quantum repeaters2. Interactions between indistinguishable photons from multiple emitters can also be used to create entangled quantum states over macroscopic physical distances3. However, to date, it has been proven difficult to achieve indistinguishability between distinct single-photon sources.
Individual trapped ions in vacuum are a natural source of identical photons, limited primarily by their independent motion5. The solid-state environment overcomes this limitation and allows distinct emitters to be addressed, but also adds complexity and local variations to the emitter environment. It has been necessary to use optical cavities6 and/or electrical tuning7,8,9 to interfere photons from distinct emitters10 in the solid state. Quantum dots and single molecules have demonstrated transform-limited linewidths over short timescales, allowing interference between photons from the same emitter6,11 and physically separated emitters7. Colour centres in diamond, located deep within an ultrapure lattice, show excellent photostability and are attractive single-photon sources. The negative nitrogen vacancy (NV−) centre is well studied and has been used for early photonics applications12,13, but its broad spectral emission is ill-suited to single-photon technologies3.
The negative silicon vacancy (SiV−) centre in diamond has promising spectral properties14,15,16. It has a strong optical transition with a prominent zero-phonon line (ZPL) at 737 nm and only a weak phonon sideband17,18,19,20,21. Structurally, it comprises a silicon atom located between adjacent vacancies in the diamond lattice15,22,23 (Fig. 1a). The strong ZPL has sparked interest, but large variation in spectral properties between individual sites16 has limited the value of SiV− as a single-photon emitter. Here we obtain highly uniform, narrow linewidths from single SiV− centres in a low-strain bulk diamond.
Results
Lifetime-limited flourescence linewidth
The diamond sample was prepared on a high-pressure high-temperature diamond substrate, as this fabrication technique can produce high crystalline quality with low strain. A layer of ultrapure diamond was overgrown on this ‹001›-oriented substrate with chemical vapour deposition, allowing precise control of impurity concentrations. Silicon was introduced to the plasma and incorporated into the diamond at concentrations below 1 p.p.b. (see Methods). Single SiV− defects formed during growth were observed by fluorescence confocal microscopy (Fig. 1b,c). Photon antibunching measurements provided confirmation of single-photon emission.
At 4 K, the ZPL consists of four lines as a result of optically allowed transitions between doublet ground and excited states24,25 (Fig. 2a,b). Each of these transitions was resonantly excited and fluorescence was detected in the sideband. Scanning the laser frequency produced photoluminescence excitation (PLE) spectra, shown in Fig. 2c for a single emitter.
The pair of lines at shorter wavelengths (higher energy), here labelled lines A and B, had full-width at half maximum (FWHM) of 352 and 409 MHz. The pair of lines at longer wavelengths were considerably narrower at 136 MHz (line C) and 119 MHz (line D). All of these PLE spectra were recorded at minimal laser intensities to avoid power broadening. To compare these linewidths with their expected Fourier-transform limit, pulsed 532 nm excitation was used to measure the excited-state lifetime for several individual SiV− centres (Fig. 2c). A decay time of 1.72±0.04 ns was measured at 4 K. Our measured result for line D is therefore only 26% over the transform-limited linewidth of 94 MHz.
Spectral stability of SiV emitters
At 4 K, 71% of the total ZPL flourescence is contained in line C. Combined with the Debye–Waller factor of 70%26, this means that half of the total SiV− flourescence is emitted into the almost transform-limited line C. In addition, this transition is known to arise from a single (axial) dipole moment24,25. These properties are ideal for coupling to narrowband cavities and waveguides, and for single-photon interference experiments, including quantum cryptography. The following discussion therefore focusses on line C.
Over a period of 7 h, the line position was recorded for a single SiV− centre (Fig. 3a). The variation in line position was found to be ±4 MHz, which is within the 95% confidence interval for this parameter obtained from a Lorentzian fit. The fact that we observe no spectral diffusion highlights the ability of SiV− to produce indistinguishable photons over long periods of time. No blinking was observed for any of the SiV− sites measured in this study.
PLE spectra were recorded for all 20 clearly resolvable SiV− sites in an arbitrary scan region, shown in Fig. 3b. On a {001} surface, the projections of ‹111›-aligned SiV− centres form two orthogonal sets24. Scanning with two orthogonal laser polarizations (encoded in colour) revealed the set to which each site in the region belonged24. The line position for each site is illustrated in Fig. 3c. Within each orientation set the sites are closely spaced, although the distinct orientations are separated by about 5 GHz. Figure 3d shows a histogram of the shifts between consecutive sites. Out of the 20 centres, 11 pairs of SiV− have separations <1 transform-limited FWHM. This means that for a randomly chosen site there is >50% probability of finding a second site in this scan region whose line is displaced by <1 FWHM. The two closest sites had lines separated by only 6 MHz (within the confidence interval of the fit), meaning a spectral overlap of at least 91%. Notably, this spectral overlap was achieved without external tuning of the spectral position.
SiV incorporation in solid immersion lens
An advantage to solid-state emitters over trapped ions is their reliable addressing, which allows direct incorporation into photonic and plasmonic devices. SiV− ensembles have been coupled into cavities27, and here we incorporate single SiV− centres into a solid-immersion lens (SILs) to demonstrate their readiness for applications (Fig. 4a). SILs allow increased collection of flourescence from high refractive index materials28,29, which is particularly useful during cryogenic experiments. Well-coupled SiV− centres were identified by scanning the depth profile with a confocal microscope. The SIL enhanced flourescence collection by about a factor of ten, giving a saturation flourescence up to Isat=730 kc s−1. Using an oil-immersion objective on a flat surface, SiV− produced Isat=200 kc s−1, which is comparable to a single NV− centre or bright molecule under the same conditions (Fig. 4b).
Discussion
Although narrow spectral lines were measured for the lower-energy transitions, the higher energy pair of lines were broader by nearly a factor of three. It is important to account for this extra width of lines A and B, and further information is provided by photoluminescence measured with a spectrometer. At 4 K, lines C and D are much brighter than the higher-energy lines (Fig. 2a), which correspond to transitions from the upper branch of the excited state (Fig. 2b). With increasing temperature, the high-energy lines gain relative intensity, indicating that thermal relaxation occurs in the SiV− excited state. The downward exchange rate Γ↓ adds to the rate of decay to the ground state and reduces the effective lifetime of the upper branch. Consequently, lines A and B are broadened and lose intensity in photoluminescence. The upward exchange rate depends on the Boltzmann factor, making it small but still measurable at 4 K. This additional rate out of the lower branch accounts for half of the exta linewidth above the transform limit for lines C and D.
To explain the observed homogeneity between distinct centres, we reconsider the energy level scheme in Fig. 2b. The ground and excited states have E symmetry15,24,25 and are split due to spin–orbit interaction24. In general, strain and electric fields can perturb these states to result in line shifts and increased splittings. Electric fields may be produced by nearby charged impurities and, therefore, vary across small spatial scales. The precise correspondence between orientation and line position for each SiV− measured here suggests that strain, which can be nearly uniform over a 7 × 7-μm region, is more influential than electric fields.
The large spin–orbit splittings of 46.7 GHz (258.1 GHz) in the ground (excited) state help to make SiV− unresponsive to small transverse strains. This occurs because the effect of such strain is a small perturbation until strain splitting increases to about the magnitude of spin–orbit. We observed this effect in the ground-state splitting measured between lines C and D, which varied much less (±1 GHz) than line position across the 20 sites and showed no correlation with orientation. This implies that the observed line shift results from axial strain. The inversion symmetry of SiV− (refs 15, 24) reduces the influence of small axial strain, as inverting the strain direction does not change line shift. Our observations indicate that this shielding has a lower threshold than provided by spin–orbit for transverse strain. Despite the presence of residual strain in this sample region we were still able to find identical emitters.
The spectral properties we have presented establish SiV− as an attractive single-photon emitter. For such applications, it is usually of interest to have a high quantum yield, meaning that the probability of photon emission is high for each excitation event. Measuring the absolute quantum yield is difficult, because it is not possible to collect all of the photons emitted by a colour centre. Here we have reported saturation fluorescence, but the presence of poorly understood metastable states30 prevents a deduction of absolute quantum yield for SiV− from these data. It seems, however, that SiV− has a lower quantum yield than NV−, which has similar saturation flourescence but a longer excited-state lifetime of 13 ns12. We found the SiV− decay lifetime to be shorter (1.28±0.06 ns) at room temperature than at 4 K (Fig. 2d). This is consistent with a thermally activated non-radiative decay path17,26,31 and indicates an improvement of the SiV− quantum yield at low temperature. It may be possible to disable this non-radiative decay path and dramatically improve the quantum yield. This could explain how SiV− centres in nanodiamonds grown on iridium were able to produce flourescence rates up to 6.2 Mc s−1 (ref. 32).
Another nuance in interpreting saturation flourescence is that photons are measured across the entire emission band of a colour centre (including the phonon sideband). For sources of indistinguishable single photons, the absolute quantum yield is less important than the ‘effective’ yield of photons in the desired transform-limited spectral line. The strong ZPL of SiV− gives it a significant advantage in this respect, and here we have established that line C can contain up to 50% of the total flourescence. Our results show that a single SiV− centre can provide indistinguishable photons at a collectable rate on the order of hundreds of kc s−1.
In summary, we have demonstrated a uniform single-photon source in the solid state without requiring external tuning of the optical properties. We observe nearly transform-limited linewidths, without spectral diffusion, which would allow high spectral overlap between single photons emitted from distinct sources. The production of multiple, independent single-photon emitters with identical properties is essential to the scalability of a number of schemes that use entangled photons, including quantum computing with linear optics, and is expected to form a fundamental resource in quantum optics technologies. The SiV− centre is therefore promising for such applications.
Methods
Sample preparation
A ‹001›-oriented plate cut from a low-strain, type-IIa, high-pressure high-temperature crystal (Sumitomo Electric Industries, Ltd) was used as a substrate for microwave plasma chemical vapour deposition. High-purity H2 and CH4 source gas, specified to 99.999% 12C isotopic enrichment (Cambridge Isotope Laboratories CLM-392) was used to produce the plasma. The residual N2 concentration was <0.1 p.p.b. for H2 and <1 p.p.b. for CH4. The total gas pressure, microwave power, methane concentration ratio (CH4/H2), growth duration and substrate temperature employed were 120 Torr, 1.4 kW, 4%, 24 h and 950–1,000 °C, respectively. The homoepitaxial layer thickness estimated from the weight difference between initial substrate and after the growth was ~60 μm giving a growth rate of 2.4 μm h−1.
Cathodoluminescence spectra (15 kV acceleration voltage, 2 × 10−7 A incident beam current) taken at room temperature in a wavelength range from 200 to 800 nm provided information on the crystalline quality and optically active impurities. Emission from free-exciton recombination was observed from most of the growth surface, in addition to a weak signal at 738 nm, which is assigned to SiV−. The reaction vessel of microwave plasma chemical vapour deposition contains mainly stainless steel and molybdenum. Quartz glass (SiO2) was used for the windows of the vessel. When homoepitaxial film was grown under low microwave power, no SiV− fluorescence was observed. Increasing the microwave input power caused the plasma to extend and etch material from the quartz, picking up silicon. In this study, a 6H-SiC single-crystal plate was also used as a silicon source to allow increased doping of grown diamond. The SiC plate was inserted between the diamond substrate and a molybdenum sample holder. It was possible to incorporate SiV− during growth at concentrations below 0.2 μm3 (~1 × 10−3 p.p.b.). Incorporation of silicon occurred relatively uniformly over the whole lateral direction.
Optical measurements
The sample was mounted in a continuous flow helium cryostat capable of cooling to 4 K. Single SiV− centres were imaged using a home-built confocal microscope. The excitation laser beam (532 nm) was focused onto the diamond surface through a 0.95-numerical aperture microscope objective (or 1.35 numerical aperture oil-immersion objective for room temperature measurements). The objective was scanned to produce confocal images of sample regions. Fluorescence was collected by the same objective, filtered with a 725- to 775-nm band-pass filter and focused through a 25-μm pinhole before detection on an avalanche photodiode. After the pinhole, the flourescence could also be sent to a spectrometer to acquire spectra from single sites. Using a high-resolution grating (1,596 grooves per mm) allowed the 4-four component fine structure to be resolved.
PLE measurements were performed on the same setup, but using a Titanium:Sapphire laser with 50 kHz linewidth for excitation. This laser could scan across the entire ZPL and detection was performed on the sideband by switching the filter to a 750- to 810-nm band-pass.
Decay lifetime of the excited state was measured by changing the excitation laser to a Titanium:Sapphire pumped optical parametric oscillator, producing 50 fs pulses at 80 MHz repetition rate. This optical parametric oscillator was set to 532 nm to excite SiV− off-resonantly. The avalanche photodiode signal was analysed using a PicoQuant TimeHarp counting card, with a resolution of 29 ps.
SIL fabrication
SILs were produced in a region of the sample known to contain a medium density of SiV− centres at a depth of 2.5–6 μm below the surface. The site density was high enough to assure a reasonable probability of coupling a SIL to a colour centre. The fabrication process was performed with a Helios Nanolab 600 Focused Ion Beam lithography system. Each SIL had a radius of 7 μm and a depth of 7 μm. The SIL images were taken with a Helios Nanolab 600 Focused Ion Beam lithography system.
Additional information
How to cite this article: Rogers, L. J. et al. Multiple intrinsically identical single-photon emitters in the solid state. Nat. Commun. 5:4739 doi: 10.1038/ncomms5739 (2014).
References
Knill, E., Laflamme, R. & Milburn, G. J. A scheme for efficient quantum computation with linear optics. Nature 409, 46–52 (2001).
Yuan, Z.-S. et al. Experimental demonstration of a BDCZ quantum repeater node. Nature 454, 1098–1101 (2008).
Bernien, H. et al. Heralded entanglement between solid-state qubits separated by three metres. Nature 497, 86–90 (2013).
Strekalov, D. V., Sergienko, A. V., Klyshko, D. N. & Shih, Y. H. Observation of two-photon "ghost" interference and diffraction. Phys. Rev. Lett. 74, 3600–3603 (1995).
Beugnon, J. et al. Quantum interference between two single photons emitted by independently trapped atoms. Nature 440, 779–782 (2006).
Santori, C., Fattal, D., Vučković, J., Solomon, G. S. & Yamamoto, Y. Indistinguishable photons from a single-photon device. Nature 419, 594–597 (2002).
Patel, R. B. et al. Two-photon interference of the emission from electrically tunable remote quantum dots. Nat. Photon. 4, 632–635 (2010).
Bernien, H. et al. Two-photon quantum interference from separate nitrogen vacancy centers in diamond. Phys. Rev. Lett. 108, 043604 (2012).
Sipahigil, A. et al. Quantum interference of single photons from remote nitrogen-vacancy centers in diamond. Phys. Rev. Lett. 108, 143601 (2012).
Shields, A. J. Semiconductor quantum light sources. Nat. Photon. 1, 215–223 (2007).
Kiraz, A. et al. Indistinguishable photons from a single molecule. Phys. Rev. Lett. 94, 223602 (2005).
Faraon, A., Santori, C., Huang, Z., Acosta, V. M. & Beausoleil, R. G. Coupling of nitrogen-vacancy centers to photonic crystal cavities in monocrystalline diamond. Phys. Rev. Lett. 109, 033604 (2012).
Barclay, P. E., Fu, K.-M. C., Santori, C., Faraon, A. & Beausoleil, R. G. Hybrid nanocavity resonant enhancement of color center emission in diamond. Phys. Rev. X 1, 011007 (2011).
Collins, A. T., Kamo, M. & Sato, Y. A spectroscopic study of optical centers in diamond grown by microwave-assisted chemical vapor deposition. J. Mater. Res. 5, 2507–2514 (1990).
Goss, J. P., Jones, R., Breuer, S. J., Briddon, P. R. & Öberg, S. The twelve-line 1.682 eV luminescence center in diamond and the vacancy-silicon complex. Phys. Rev. Lett. 77, 3041–3044 (1996).
Neu, E. et al. Low-temperature investigations of single silicon vacancy colour centres in diamond. New J. Phys. 15, 043005 (2013).
Feng, T. & Schwartz, B. D. Characteristics and origin of the 1.681 eV luminescence center in chemical-vapor-deposited diamond films. J. Appl. Phys. 73, 1415–1425 (1993).
Brown, S. W. & Rand, S. C. Site symmetry analysis of the 738 nm defect in diamond. J. Appl. Phys. 78, 4069–4075 (1995).
Clark, C. D., Kanda, H., Kiflawi, I. & Sittas, G. Silicon defects in diamond. Phys. Rev. B 51, 16681–16688 (1995).
Edmonds, A. M., Newton, M. E., Martineau, P. M., Twitchen, D. J. & Williams, S. D. Electron paramagnetic resonance studies of silicon-related defects in diamond. Phys. Rev. B 77, 245205 (2008).
Neu, E. et al. Single photon emission from silicon-vacancy colour centres in chemical vapour deposition nano-diamonds on iridium. New J. Phys. 13, 025012 (2011).
Turukhin, A. V., Liu, C. -H., Gorokhovsky, A. A., Alfano, R. R. & Phillips, W. Picosecond photoluminescence decay of si-doped chemical-vapor-deposited diamond films. Phys. Rev. B 54, 16448–16451 (1996).
Wang, C., Kurtsiefer, C., Weinfurter, H. & Burchard, B. Single photon emission from SiV centres in diamond produced by ion implantation. J. Phys. B Atom. Mol. Opt. Phys. 39, 37 (2006).
Rogers, L. J. et al. Electronic structure of the negatively charged silicon-vacancy center in diamond. Phys. Rev. B 89, 235101 (2014).
Hepp, C. et al. Electronic structure of the silicon vacancy color center in diamond. Phys. Rev. Lett. 112, 036405 (2014).
Collins, A. T., Allers, L., Wort, C. J. & Scarsbrook, G. A. The annealing of radiation damage in de Beers colourless CVD diamond. Diamond Related Mater. 3, 932–935 (1994).
Lee, J. C., Aharonovich, I., Magyar, A. P., Rol, F. & Hu, E. L. Coupling of silicon-vacancy centers to a single crystal diamond cavity. Opt. Express 20, 8891–8897 (2012).
Marseglia, L. et al. Nanofabricated solid immersion lenses registered to single emitters in diamond. Appl. Phys. Lett. 98, 133107 (2011).
Castelletto, S. et al. Diamond-based structures to collect and guide light. New J. Phys. 13, 025020 (2011).
Neu, E. et al. Electronic transitions of single silicon vacancy centers in the near-infrared spectral region. Phys. Rev. B 85, 245207 (2012).
Rogers, L. How far into the infrared can a colour centre in diamond emit? Phys. Proc. 3, 1557–1561 (2010).
Neu, E., Agio, M. & Becher, C. Photophysics of single silicon vacancy centers in diamond: implications for single photon emission. Opt. Express 20, 19956–19971 (2012).
Acknowledgements
We acknowledge ERC, EU projects (SIQS, DIADEMS and EQUAM), DFG (FOR 1482, FOR 1493 and SFBTR 21), JST, BMBF, the Alexander von Humboldt, and the Sino-German and Volkswagen foundations for funding. We acknowledge G. Neusser and the FIB Center UUlm for support in manufacturing SILs.
Author information
Authors and Affiliations
Contributions
L.J.R. and K.D.J. did the low-temperature PLE experiments; T.T. and J.I. produced the sample; L.P.M., B.N. and C.M. characterized the sample at room temperature and performed saturation experiments; L.M. and C.K. fabricated and characterized the SILs; H.S. performed the SIL simulations. The manuscript was written by L.J.R., K.D.J. and L.P.M., and all authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
About this article
Cite this article
Rogers, L., Jahnke, K., Teraji, T. et al. Multiple intrinsically identical single-photon emitters in the solid state. Nat Commun 5, 4739 (2014). https://doi.org/10.1038/ncomms5739
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms5739
This article is cited by
-
Coherence of a charge stabilised tin-vacancy spin in diamond
npj Quantum Information (2022)
-
In-situ measurements of fabrication induced strain in diamond photonic-structures using intrinsic colour centres
npj Quantum Information (2020)
-
Strong spin–orbit quenching via the product Jahn–Teller effect in neutral group IV qubits in diamond
npj Quantum Materials (2020)
-
Coherent acoustic control of a single silicon vacancy spin in diamond
Nature Communications (2020)
-
Spin-controlled generation of indistinguishable and distinguishable photons from silicon vacancy centres in silicon carbide
Nature Communications (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.