Abstract
A multitude of systems ranging from the Barkhausen effect in ferromagnetic materials to plastic deformation and earthquakes respond to slow external driving by exhibiting intermittent, scalefree avalanche dynamics or crackling noise. The avalanches are powerlaw distributed in size, and have a typical average shape: these are the two most important signatures of avalanching systems. Here we show how the average avalanche shape evolves with the universality class of the avalanche dynamics by employing a combination of scaling theory, extensive numerical simulations and data from crack propagation experiments. It follows a simple scaling form parameterized by two numbers, the scaling exponent relating the average avalanche size to its duration and a parameter characterizing the temporal asymmetry of the avalanches. The latter reflects a broken timereversal symmetry in the avalanche dynamics, emerging from the local nature of the interaction kernel mediating the avalanche dynamics.
Introduction
The theoretical interpretation of crackling noise^{1}, observed in numerous systems, including the Barkhausen effect in ferromagnetic materials^{2,3}, plastic deformation^{4,5,6}, structural transitions^{7} and fracture^{8,9} of solids and earthquakes^{10}, has found a formulation in terms of nonequilibrium phase transitions^{11}. These transitions separate quiescent and active phases of the system, and naturally give rise to critical scaling^{12}. In the vicinity of such a phase transition, the time evolution of the activity signal V(t) or the order parameter of the transition (for example, the interface velocity for a depinning transition) exhibits scalefree bursts or avalanches. Statistical analysis of such fluctuations, together with renormalization group calculations^{13}, suggest that in general systems with avalanche dynamics can be classified into universality classes characterized by the values of the critical exponents, depending on, for example, the spatial dimension and the interaction range of the system.
The average temporal shape of bursts in a crackling noise signal is a fundamental signature of avalanches, and has been estimated for systems as diverse as plastically deforming crystals^{14}, earthquakes^{15} and Barkhausen noise^{16,17,18}. For the latter, the symmetric average avalanche shape observed in ferromagnetic films of intermediate thickness where the longrange dipolar interactions render the avalanche dynamics mean fieldlike has been explained within the ABBM model^{19}, and shown to be given by an inverted parabola^{16,20,21,22}. In thick enough samples eddy currents induce an effective mass for the propagating domain walls, visible as an asymmetry in the (meanfieldlike) average shape of the Barkhausen pulses^{17}. In general, clearcut shape determinations should give strong indications of the underlying physics, such as the kind and range of interactions governing the avalanche dynamics.
Here we present a general scaling form for the average avalanche shapes for nonmeanfield systems. It is verified within a largescale numerical study of avalanches at the depinning transition of driven elastic interfaces in random media. We vary systematically the range of the elastic interaction kernel, and thus the universality class of the avalanche dynamics^{23}, showing how the avalanche shape depends on the universality class. The average shape is to a high precision given by a function parameterized by the scaling exponent γ characterizing the scaling of the average avalanche size as a function of the avalanche duration, and a parameter a describing the temporal asymmetry of the average avalanche shapes. We find that an inherent asymmetry in the average avalanche shapes is present in systems where the interaction kernel is not fully nonlocal, reflecting the underlying broken timereversal symmetry of the avalanche dynamics. Finally, we compare these results with experiments of planar crack front propagation, finding good agreement with the predictions of the scaling theory and the relevant depinning model.
Results
Average avalanche shape scaling function
To obtain a general scaling form for the average shape of the bursts in V(t) corresponding to avalanches of a given duration T, ‹V(t  T)〉, we start from the wellknown result that the average avalanche size ‹s(T)〉 follows in the scaling regime
Thus, the amplitude of the average avalanche shape of avalanches of duration T has with T the relation ‹V(t  T)〉∝T^{γ−1}, and is in general given by the form
where f(x) is a scaling function characterizing the average temporal avalanche shape. We make the Ansatz that the average earlytime growth of an avalanche is given by a power law of time, that is, ‹V(t  T)〉∝t^{δ} for . Given that equation (2) implies that ‹V(t  T)〉∝T^{γ−1} for any fixed t/T, it follows in particular that ‹V(bT  T)〉∝T^{γ−1}. Therefore, in order for the postulated power law earlytime growth to be compatible with this, one needs to have ‹V(bT  T)〉∝(bT)^{δ}∝T^{γ−1}, that is, δ=γ−1. Thus, the average earlytime growth scales with t as
To arrive at an expression for ‹V(t  T)〉 satisfying equations (2) and (3), we multiply equation (3) by (1−t/T)^{γ−1}, to describe the (symmetric) deceleration at the end of an avalanche, and obtain
In meanfield systems, ‹V(t  T)〉 is known to be given in the scaling regime by the inverted parabola, predicted within the ABBM model in the limit of vanishing drive rate and demagnetizing factor, ‹V(t  T)〉∝t(1−t/T)≡T(t/T)(1−t/T) (ref. 16). This is in agreement with equation (4), given the meanfield value γ=2. Notice also that random walk bridges obey similar scaling with γ=3/2 (refs 24, 25).
Although avalanches in meanfield systems have a symmetric average shape^{16}, there is no fundamental reason why this should be true in general. Indeed, it is easy to see from the spacetime activity plots of avalanches from, for example, the local quenched Edwards–Wilkinson (qEW) equation^{26} used in this study (see Fig. 1a) that the internal dynamics of the avalanches appears to violate timereversal symmetry: the branching exhibited by the activity pattern at all scales clearly defines a direction of time. This means that the system is not Markovian: a possible signature of that is a temporal asymmetry in the average avalanche shape ‹V(t  T)〉 (ref. 24). For an increasing range of the elastic interactions, the timeirreversible nature of the activity pattern becomes less evident (Fig. 1b) and naturally vanishes for the meanfield infinite range model (Fig. 1c; see below for the definitions of the various interface depinning models): the activity pattern becomes a cloud of points without any internal timeirreversible structure.
Therefore, to account for the timeirreversible avalanche dynamics, we need to allow for a small temporal asymmetry in the average avalanche shape. Thus, we multiply equation (4) by 1−a(t/T−1/2), that is, a first order correction term allowing for an asymmetry quantified by a, and obtain
If a=0, equation (5) reduces to equation (4) and corresponds to a symmetrical avalanche shape. With a≠0, equation (5) describes a temporally asymmetric avalanche shape, with a positive or negative skewness for a>0 and a<0, respectively (see also Supplementary Note 1).
Numerical simulations of interface depinning models
To check equation (5), we perform extensive simulations of a discretized model of a 1d elastic string or interface in a 2d random medium^{23}, represented by a set of integer heights h_{i}(t), i=1 … L, with L the system size. The lateral coordinates x_{i} of the interface are given by x_{i}=i. The total force acting on the interface element i is
where the first term on the RHS represents the elastic interactions characterized by the exponent α, η is uncorrelated quenched disorder and F_{ext} is the external driving force. Notice that in the limit α→∞, the elastic interaction term becomes completely local, Γ_{0}(h_{i+1}+h_{i}_{−}_{1}−2h_{i})≡Γ_{0}∇^{2}h_{i}: thus, equation (6) reduces to the qEW equation. In the opposite limit (α→0) the system loses its spatial structure and we describe it by the meanfield infiniterange model, by replacing the elastic interactions in equation (6) by , with . For the intermediate case of α=2, equation (6) reduces to the longrange elastic string expected to describe, for example, planar crack fronts propagating along disordered weak planes between solid blocks^{27,28}, contact lines of liquids spreading on solid surfaces^{29} and lowangle grain boundaries in plastically deforming crystals^{30}. Furthermore, α≥3 belongs to the qEW class, whereas α=1 is expected to follow meanfield dynamics. The crackling noise signal is given by , where v_{i}=θ(F_{i}), with θ the Heaviside step function. For additional details, see Methods.
As expected, ‹s(T)〉 scales with T according to equation (1) (see Supplementary Fig. S1 and Supplementary Note 2). We find three different values of γ, that is, γ=2.0±0.01 for α≤1, γ=1.79±0.01 for α=2 and γ=1.56±0.01 for α≥3. These values are in agreement with earlier results, either directly or via scaling relations^{12,16,27,31}. Fitting equation (5) to the ‹V(t  T)〉 data for various α and different ranges of T in the scaling regime reproduces well these γexponents (Fig. 2a,b; see also Supplementary Figs S2–S5 and Supplementary Notes 3 and 4). The avalanche shapes exhibit an asymmetry, with the aparameter evolving continuously from −0.01±0.02 (for the infinite range model) to 0.081±0.015 (for the qEW equation), as the interaction range is reduced (Fig. 2c; see also Supplementary Fig. S6 and Supplementary Note 5). The corresponding skewness (computed by interpreting ‹V(t  T)〉 as a probability density^{17}) of the avalanches exhibits a similar evolution with α (Supplementary Fig. S7, Supplementary Note 6). Thus, avalanches whose dynamics is governed by interaction kernels that are not fully nonlocal are temporally asymmetric, as illustrated by the timeirreversible nature of the corresponding spacetime activity patterns (Fig. 1).
Planar crack front propagation experiments
Finally, we consider data from planar crack front propagation experiments^{9,32}, as an example of an experimental system with nonmeanfield avalanche dynamics, see Methods for details. The scaling of the average size of the avalanches of crack front propagation as a function of their duration is shown in Fig. 3b. In the scaling regime, these are characterized by γ=1.67±0.15, in agreement with the 1d nonlocal elasticity depinning model with α=2 (refs 27, 28), see also Supplementary Fig. S8. The average avalanche shape is shown in Fig. 3a. Owing to the nonnegligible statistical fluctuations present in the data, it is not possible to detect the small asymmetry predicted by the crack line model: thus, we choose to fit the leadingorder behaviour, equation (4), to the data (see also Supplementary Fig. S9). This leads to γ=1.74±0.08, in agreement with the γvalue obtained from the fit to the shape obtained from the crack line model^{27,28}. Notice also that the experimental shape clearly differs from both the meanfield inverted parabola and the shape expected for the local qEW equation.
Discussion
We have shown how the average avalanche shape of systems exhibiting crackling noise depends on the universality class of the avalanche dynamics. It is a fundamental fingerprint of an avalanching system and extrapolates when tuning elastic interactions between an inverted parabola for meanfield systems and a shape close to a semicircle for the 1d shortrange interface. The broken timereversal symmetry in the avalanche dynamics emerging from the spatially localized interactions is manifested as a temporal asymmetry in the avalanche shape evolving with the interaction range (see also Supplementary Discussion). Thus, such asymmetries should be looked for in experimental data in systems where the interactions mediating the avalanche dynamics are not fully nonlocal. These include, for example, domain wall dynamics in magnetic thin films^{33} and fluid invasion into disordered media^{34,35}.
Methods
Numerical simulations of interface depinning models
We simulate the interface depinning model, equation (6) with periodic boundary conditions. The parallel dynamics of the interface is defined in discrete time t by setting the local velocity v_{i}(t)≡h_{i}(t+1)−h_{i}(t)=θ(F_{i}), where θ is the Heaviside step function. The interface is driven with a quasistatic constant velocity drive, where avalanches are triggered by increasing F_{ext} just enough to make exactly one interface element unstable (that is, F_{i}>0 for some i) whenever the previous avalanche has ended. Thus, avalanches can be defined unambiguously without thresholding^{28}. During an avalanche, F_{ext} is decreased at a rate proportional to the instantaneous avalanche velocity, . k is a parameter analogous to the demagnetizing factor for ferromagnetic domain walls^{36} or to the elastic stiffness of the specimenmachine system in a mechanical loading experiment^{37} and controls the cutoff of the avalanche distribution, with the cutoff size s_{0} obeying . The crackling noise signal of interest is given by . To compute the average avalanche shapes, we collect a large ensemble of avalanches from various duration ranges. For T in the scaling regime, the average shapes corresponding to the various duration ranges fall onto a single curve after normalizing with the maximum amplitude, ‹V(t  T)〉_{max}. The simulations are performed in large system sizes (L=8,192=2^{13} for α≥3, L=32,768=2^{15} for α=2, L=131,078=2^{17} for α=1 and L=8,388,608=2^{23} for the infinite range model), and by using sufficiently small kvalues such that the avalanche cutoff is large. Examples of the crackling noise signals obtained from the model for different interaction ranges are shown in Fig. 4.
Planar crack front propagation experiments
To extract the average avalanche shape for the planar crack propagation experiments, slow creep motion of a planar crack front propagating along the heterogeneous weak plane of a transparent poly (methyl methacrylate) block, made of two sintered rough Plexiglas plates (of dimensions (27, 14 and 1) cm for the top and (30, 12 and 0.4) cm for the bottom plate, respectively) is studied^{8,9,32}. We imposed a constant normal displacement d to the bottom plate while the upper one is fixed, resulting in a quasimode I creep growth of the crack, see Fig. 5a. The interfacial fracture front was observed in a small central region (to avoid boundary effects) corresponding to around 4.48 mm and 6.72 mm in the direction of propagation and along the front, respectively. The propagation of the crack front is monitored optically by using a camera with a high frame rate compared with the average crack front velocity, recording typically 20,000 images of 2,000 × 3,000 pixels with a pixel size of r=2.24 μm at a rate ranging from 1 to 60 fps. From these images, we define the local velocity v along the crack front by measuring the waiting time (wt) the front has spent at a given position (x,y) and setting v(x,y)=r/wt(x,y) (ref. 9), see Fig. 5b. We consider here the ‘global’ velocity of the crack front V(t), computed (that is, spatially averaged from the local velocities) at a length scale of δx=200 μm, larger than the correlation length of 100 μm of the local velocities^{32}, leading to more than 30 different and independent crackling noise signals V(t) for each creep test (since the lateral size of the imaging area divided by δx is (6720 μm)/(200 μm)=33.6). Five different creep experiments with low average crack front velocities V=‹V(t)〉_{t} (V ranging from 0.017 μm s^{−1} to 1.13 μm s^{−1}) are considered, resulting in more than 150 crackling noise signals containing in total more than 4,000 bursts or avalanches. An example of a signal V(t) is shown in Fig. 5c.
During a creep test, the average crack front velocity decreases slowly. However, the time intervals studied here are short enough to consider the average crack front velocity constant within such time windows. Avalanches are defined as a continuous occurrence of V(t) above its average value V=‹V(t)〉_{t}. We have verified that by choosing another threshold values in a reasonable interval around V does not influence the extracted results. The average value is subtracted from V(t) to define the avalanche size (that is, the integral of V(t)−V) and shape. As the different experiments have a different average velocity, we consider the rescaled avalanche durations T′=T/T_{V}, where the time scale T_{V} is given by T_{V}=r/V. Also, very short and very long avalanches might affect the scaling behaviour as well as the avalanche shape, owing to a poor resolution and a lack of statistics, respectively. Therefore, we consider only avalanches that last longer than T=25 δt, (the temporal resolution δt varying between 1/60 s up to 1 s for the various experiments performed). In the inset of Supplementary Fig. S8, we show the probability density functions P(T′) of the normalized durations for all avalanches extracted and for such a subset, that is, P(T′T>25). We can observe an exponential cutoff for large duration T′>2.5, which provides the upper limit for the scaling range we will consider, leading finally to the study of slightly more than 1,500 avalanches. A powerlaw fit to the avalanche size s as a function of the normalized durations T′ for those avalanches yields an exponent γ=1.67±0.15 (as shown in Fig. 3b, and in the Supplementary Fig. S8), in good agreement within error bars with the 1d depinning model with α=2 (ref. 27). We finally normalize the amplitudes of those avalanches by T′^{γ−1} and compute their average shape ‹V(t  T′)〉. The resulting average avalanche shape normalized by the maximum amplitude, ‹V(t  T′)〉/‹V(t  T′)〉_{max}, is shown in Fig. 3a.
Finally, we discuss the effect of the limited statistics available from the experiments. In order to estimate the amount of statistics required to observe the predicted asymmetry, we estimate the statistical error bars δ_{N}(V/V_{max}) of the average avalanche shapes averaged over N avalanches as , where δ_{1}(V/V_{max})≈1 is the fluctuation magnitude of an individual avalanche. As the typical difference between the normalized avalanche shape of the depinning model with α=2 and the corresponding symmetrical shape is roughly 0.005 or less (see Fig. 2c), the error bars have to be smaller than that to be able to distinguish the asymmetry from the data. Setting δ_{N}(V/V_{max})=0.005 corresponds to N=40,000, which should be interpreted as a lower limit. Thus, we estimate the order of magnitude of the number of avalanches N required to make conclusions regarding the asymmetry to be of the order of N=10^{5}, that is, two orders of magnitude more than the number of avalanches we have at our disposal from the experiments. Indeed, this can also be seen from the data: in Supplementary Fig. S9 we show again the experimental average avalanche shape, along with a fit of equation (4). The inset displays their difference, showing clearly that the very small correction to the symmetric shape predicted by the crack line model is hidden by statistical noise.
Additional information
How to cite this article: Laurson, L. et al. Evolution of the average avalanche shape with the universality class. Nat. Commun. 4:2927 doi: 10.1038/ncomms3927 (2013).
References
 1.
Sethna, J. P., Dahmen, K. & Myers, C. R. Crackling Noise. Nature 410, 242–250 (2001).
 2.
Durin, G. & Zapperi, S. inThe Science of Hysteresis eds Bertotti G., Mayergoyz I. 181–267Academic: Amsterdam, (2006).
 3.
Durin, G. & Zapperi, S. Scaling exponents for barkhausen avalanches in polycrystalline and amorphous ferromagnets. Phys. Rev. Lett. 84, 4705–4708 (2000).
 4.
Zaiser, M. Scale invariance in plastic flow of crystalline solids. Adv. Phys. 54, 185–245 (2006).
 5.
Miguel, M. C., Vespignani, A., Zapperi, S., Weiss, J. & Grasso, J. R. Intermittent dislocation flow in viscoplastic deformation. Nature 410, 667 (2001).
 6.
Dimiduk, D. M., Woodward, C., LeSar, R. & Uchic, M. D. Scalefree intermittent flow in crystal plasticity. Science 312, 1188–1190 (2006).
 7.
Vives, E. et al. Distributions of avalanches in martensitic transformations. Phys. Rev. Lett. 72, 1694–1697 (1994).
 8.
Schmittbuhl, J. & Måløy, K. J. Direct observation of a selfaffine crack propagation. Phys. Rev. Lett. 78, 3888 (1997).
 9.
Måløy, K. J., Santucci, S., Schmittbuhl, J. & Toussaint, R. Local waiting time fluctuations along a randomnly pinned crack front. Phys. Rev. Lett. 96, 045501 (2006).
 10.
Gutenberg, B. & Richter, C. F. Magnitude and energy of earthquakes. Ann. Geofis. 9, 1 (1956).
 11.
Lübeck, S. Universal scaling behavior of nonequilibrium phase transitions. Int. J. Mod. Phys. B 18, 3977–4118 (2004).
 12.
Fisher, D. S. Collective transport in random media: from superconductors to earthquakes. Phys. Rep. 301, 113–150 (1998).
 13.
Le Doussal, P. & Wiese, K. J. Size distributions of shocks and static avalanches from the functional renormalization group. Phys. Rev. E 79, 051106 (2009).
 14.
Laurson, L. & Alava, M. J. 1/f noise and avalanche scaling in plastic deformation. Phys. Rev. E 74, 066106 (2006).
 15.
Mehta, A. P., Dahmen, K. A. & BenZion, Y. Universal mean moment rate profiles of earthquake ruptures. Phys. Rev. E 73, 056104 (2006).
 16.
Papanikolaou, S. et al. Universality beyond power laws and the average avalanche shape. Nature Phys. 7, 316–320 (2011).
 17.
Zapperi, S., Castellano, C., Colaiori, F. & Durin, G. Signature of effective mass in cracklingnoise asymmetry. Nature Phys. 1, 46–49 (2005).
 18.
Mehta, A. P., Mills, A. C., Dahmen, K. A. & Sethna, J. P. Universal pulse shape scaling function and exponents: critical test for avalanche models applied to Barkhausen noise. Phys. Rev. E 65, 046139 (2002).
 19.
Alessandro, B., Beatrice, C., Bertotti, G. & Montorsi, A. Domain wall dynamics and Barkhausen effect in metallic ferromagnetic materials. i. Theory. J. Appl. Phys. 68, 2901–2908 (1990).
 20.
Le Doussal, P. & Wiese, K. J. Distribution of velocities in an avalanche. EPL 97, 46004 (2012).
 21.
Le Doussal, P. & Wiese, K. J. Avalanche dynamics of elastic interfaces. Phys. Rev. E 88, 022106 (2013).
 22.
Dobrinevski, A., Le Doussal, P. & Wiese, K. J. Nonstationary dynamics of the AlessandroBeatriceBertottiMontorsi model. Phys. Rev. E 85, 031105 (2012).
 23.
Tanguy, A., Gounelle, M. & Roux, S. From individual to collective pinning: Effect of longrange interactions. Phys. Rev. E 58, 1577–1590 (1998).
 24.
Baldassarri, A., Colaiori, F. & Castellano, C. Average shape of a fluctuation: universality in excursions of stochastic processes. Phys. Rev. Lett. 90, 060601 (2003).
 25.
Laurson, L., Illa, X. & Alava, M. J. The effect of thresholding on temporal avalanche statistics. J. Stat. Mech. P01019 doi:10.1088/17425468/2009/01/P01019 (2009).
 26.
Nattermann, T., Stepanow, S., Tang, L.H. & Leschhorn, H. Dynamics of interface depinning in a disordered medium. J. Phys. II France 2, 1483 (1992).
 27.
Bonamy, D., Santucci, S. & Ponson, L. Crackling dynamics in material failure as the signature of a selforganized dynamic phase transition. Phys. Rev. Lett. 101, 045501 (2008).
 28.
Laurson, L., Santucci, S. & Zapperi, S. Avalanches and clusters in planar crack front propagation. Phys. Rev. E 81, 046116 (2010).
 29.
Joanny, J. F. & De Gennes, P. G. A model for contact angle hysteresis. J. Chem. Phys. 81, 552–562 (1984).
 30.
Moretti, P., Miguel, M. C., Zaiser, M. & Zapperi, S. Depinning transition of dislocation assemblies: Pileups and lowangle grain boundaries. Phys. Rev. B 69, 214103 (2004).
 31.
Duemmer, O. & Krauth, W. Depinning exponents of the driven longrange elastic string. J. Stat. Mech. P01019 doi:10.1088/17425468/2007/01/P01019 (2007).
 32.
Tallakstad, K. T., Toussaint, R., Santucci, S., Schmittbuhl, J. & Måløy, K. J. Local dynamics of a randomly pinned crack front during creep and forced propagation: An experimental study. Phys. Rev. E 83, 046108 (2011).
 33.
Ryu, K.S., Akinaga, H. & Shin, S.C. Tunable scaling behaviour observed in Barkhausen criticality of a ferromagnetic film. Nature Phys. 3, 547–550 (2007).
 34.
Rost, M., Laurson, L., Dubé, L. & Alava, M. J. Fluctuations in fluid invasion into disordered media. Phys. Rev. Lett. 98, 054502 (2007).
 35.
Planet, R., Santucci, S. & Ortin, J. Avalanches and nonGaussian fluctuations of the global velocity of imbibition fronts. Phys. Rev. Lett. 102, 094502 (2009).
 36.
Durin, G. & Zapperi, S. Universality and size effects in the Barkhausen noise. J. Appl. Phys. 87, 7031–7033 (2000).
 37.
Csikor, F., Motz, C., Weygand, D., Zaiser, M. & Zapperi, S. Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale. Science 318, 251–254 (2007).
Acknowledgements
J.P. Sethna, S. Papanikolaou, G. Durin and A. Dobrinevski are thanked for discussions. This research has been supported by the Academy of Finland through a Postdoctoral Researcher’s Project (L.L., project number 139132), an Academy Research Fellowship (L.L., project number 268302) and through the Centres of Excellence Program (project number 251748). L.L. acknowledges the support of the Theory Programme of Helsinki Institute of Physics. S.S. wishes to thank for the hospitality of the Visiting Professor Programme of the Aalto University School of Science. X.I. acknowledges the financial support from the Spanish ‘Ministerio de Economa y Competitividad’ (Programa Juan de la Cierva and project MAT201015114). K.T.T. and K.J.M. acknowledge the support of the Norwegian Research Council (project number 205486). We acknowledge the computational resources provided by the Aalto ScienceIT project.
Author information
Affiliations
COMP Centre of Excellence, Department of Applied Physics, P.O. Box 11100, FI00076 Aalto, Espoo, Finland
 Lasse Laurson
 & Mikko J Alava
Facultat de Física, Departament Estructura i Constituents de la Materia, Universitat de Barcelona, Martí i Franquès 1, 08028 Barcelona, Catalonia, Spain
 Xavier Illa
Laboratoire de physique, CNRS UMR 5672, Ecole Normale Supérieure de Lyon, 46 Allée d’Italie, 69364 Lyon Cedex 07, France
 Stéphane Santucci
Department of Physics, University of Oslo, PB 1048 Blindern, NO0316 Oslo, Norway
 Ken Tore Tallakstad
 & Knut Jørgen Måløy
Authors
Search for Lasse Laurson in:
Search for Xavier Illa in:
Search for Stéphane Santucci in:
Search for Ken Tore Tallakstad in:
Search for Knut Jørgen Måløy in:
Search for Mikko J Alava in:
Contributions
L.L. and X.I. designed and performed the numerical modelling. L.L. and M.J.A. developed the scaling theory. S.S., K.T.T. and K.J.M. performed and analysed the experiments. L.L. wrote the first draft of the manuscript. All authors contributed to improve the manuscript.
Competing interests
The authors declare no competing financial interests.
Corresponding author
Correspondence to Lasse Laurson.
Supplementary information
PDF files
 1.
Supplementary Information
Supplementary Figures S1S9, Supplementary Notes 16, Supplementary Discussion and Supplementary References
Rights and permissions
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. To view a copy of this licence visit http://creativecommons.org/licenses/by/3.0/.
About this article
Further reading

Playing with universality classes of Barkhausen avalanches
Scientific Reports (2018)

Aftershock sequences and seismiclike organization of acoustic events produced by a single propagating crack
Nature Communications (2018)

Universal features of amorphous plasticity
Nature Communications (2017)

Universal slip dynamics in metallic glasses and granular matter – linking frictional weakening with inertial effects
Scientific Reports (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.