The development of an anterior–posterior (AP) polarity is a crucial process that in the mouse has been very difficult to analyse, because it takes place as the embryo implants within the mother. To overcome this obstacle, we have established an in-vitro culture system that allows us to follow the step-wise development of anterior visceral endoderm (AVE), critical for establishing AP polarity. Here we use this system to show that the AVE originates in the implanting blastocyst, but that additional cells subsequently acquire AVE characteristics. These 'older' and 'younger' AVE domains coalesce as the egg cylinder emerges from the blastocyst structure. Importantly, we show that AVE migration is led by cells expressing the highest levels of AVE marker, highlighting that asymmetry within the AVE domain dictates the direction of its migration. Ablation of such leading cells prevents AVE migration, suggesting that these cells are important for correct establishment of the AP axis.
The first days of mouse embryo development are devoted to setting aside a group of pluripotent cells, the epiblast, from two extra-embryonic lineages: the trophectoderm and primitive endoderm. Epiblast cells will give rise to all cells of the future body while both of the extra-embryonic tissues are critical to provide support for embryo development in utero and for establishing the anterior–posterior (AP) axis. It is relatively well known how these lineages become established, as embryos can be cultured, manipulated and imaged until the blastocyst stage. However, as the blastocyst implants into the uterus, it becomes inaccessible and, therefore, it has been difficult to follow the dynamics of the events leading to AP axis formation.
Following implantation, the epiblast and surrounding extra-embryonic tissues undergo a burst of proliferation and transform into the egg cylinder, an elongated cup-like structure that becomes the foundation of the future body. This transformation is a highly dynamic process associated with intensive growth and changes in the shape and topology of the tissues. As a result, the epiblast becomes positioned toward the distal part of the egg cylinder, the trophectoderm-derived extra-embryonic ectoderm (ExE) locates in the proximal part, and both of these tissues become enveloped by primitive endoderm-derived visceral endoderm (VE). Around this time, AP polarity becomes defined.
By embryonic day 5.5 (E5.5), a distinct group of VE cells, the anterior visceral endoderm (AVE), have assembled at the distal tip of the egg cylinder1,2. This unique group of cells will subsequently expand and undertake unilateral movement towards the proximal region of the egg cylinder to specify the site where the head will form1,3,4. This movement is critical for correct positioning of the AP axis. It is well-established that AVE formation is the result of a combination of inductive signalling by the transforming growth factor-β family members, Nodal and Activin5,6,7, and inhibitory signals originating in ExE, particularly bone morphogenetic protein 48,9,10,11. However, how the AVE becomes specified and the dynamics of its formation currently remain unclear. Interestingly, several recent studies indicate that expression of AVE markers such as Lefty112,13 and Cerl14,15 is initiated at the blastocyst stage, and so, earlier than previously expected. But are these cells that show early expression of AVE markers truly AVE progenitors? If so, how do they develop to contribute to the AVE? To answer these questions directly would require the visualisation and continuous tracing of the behaviour of these early expressing cells from pre- to post-implantation stages as the AVE forms. Until now, this has not been possible, because although embryo culture throughout this stage had been reported in the past16,17,18,19 the reported protocols have not been widely adopted, most likely because of the lack of quantitative comparison with in vivo development and poor efficiencies of embryo survival. Most importantly, they have never been developed for high-resolution time-lapse imaging, and consequently, dynamic observations of this crucial stage of development have never been made.
To build a picture of this critical pre- to post-implantation transition, we previously carried out a series of complex experiments in which individual blastocyst cells were marked, then blastocysts were transferred into foster mothers to permit further development and subsequently recovered at successive implantation stages to analyse the clonal distribution of cells3,15,20. This very laborious approach proved insightful and suggested a model for how the egg cylinder might emerge from the blastocyst structure, but this complex process could only be extrapolated from a limited number of static pictures. Therefore, aiming to gain better and direct insight into how the blastocyst transforms into the egg cylinder and how the AP axis forms, we designed conditions that would allow reproducible development, and importantly, four-dimensional imaging of single cell behaviour, beyond the blastocyst stage outside the mother.
Here we report the step-wise development of AVE sub-domains from individual cells of the implanting blastocyst and their subsequent coalescence to form an asymmetrical domain of AVE at the distal tip of the egg cylinder. These key stages of AVE formation have been observed in real time, using our newly validated in-vitro embryo culture technique that can be used to follow the dynamics of cellular events within the embryo at post-implantation stages. We show that such in vitro-cultured and -imaged embryos develop the correct morphology and spatio-temporal expression of epiblast, trophectoderm- and primitive endoderm-derived tissue marker genes as the blastocyst grows into the egg cylinder. We also confirm that the AVE develops in accordance with 'snap-shot' observations of embryos sampled from mothers at successive implantation stages12,13,15,20, and the pattern of expression of anterior and posterior markers indicates proper establishment of the AP axis. Finally, we show that the asymmetry in the expression of AVE marker genes dictates the direction of its anterior migration.
Novel culture system to follow development beyond the blastocyst stage
To follow the dynamics of AVE development, we first needed to establish a reproducible system for culturing mouse embryos in vitro, which would permit time-lapse observations of the transition from the pre-implantation blastocyst to the post-implantation egg cylinder. As a starting point, we evaluated culture methods that had been reported in the 1970s16,17,18 but not widely adopted. We found that supplementing the media with human cord serum was the key to success and permitted the development of approximately 40% of blastocysts to the egg cylinder stage on plastic culture dishes (Supplementary Fig. S1; Supplementary Table S1). Under these conditions, the egg cylinders that developed from blastocysts in vitro were morphologically similar to egg cylinders collected from mothers, and showed the same spatial patterns of expression of the respective ExE, VE and epiblast marker genes, Cdx2, Gata4 and Oct4 (Supplementary Fig. S1).
However, this culture system was not suitable for our purpose, as the plastic dishes used as a platform for the embryo development were not amenable to live-imaging at cellular resolution. Moreover, we found that none of the commercially available, optically friendly culture dishes permitted correct development (Supplementary Table S1). Therefore, we assessed the use of polyacrylamide hydrogels bonded to glass and overlaid with various protein coatings, as similar approaches have been successful in other cell culture systems21 (Supplementary Tables S1 and S2). We found that two variables were of particular importance for successful culture of embryos. First, the surface stiffness of the polyacrylamide hydrogel, which we optimised by varying N′N′-methylenebisacrylamide and acrylamide ratios; second, its protein coating. A coating of type I rat-tail collagen allowed 87% (13/15) of embryos to attach to the matrix and 38% (5/13) to develop into egg cylinders (Supplementary Table S2). In contrast, laminin or fibronectin alone were unsuitable surface coatings, but would allow 80% (12/15) of embryos to attach and 41% (5/12) to form egg cylinders when used in combination with collagen.
We set out to use these collagen-coated polyacrylamide matrices to follow the cellular dynamics of an egg cylinder emergence by spinning-disc, confocal time-lapse microscopy. Typically, when zona-free E3.5 blastocysts were seeded onto the culture gels, embryos developed over 5 days following the indicated time course (Fig. 1a–d; Supplementary Movies 1–3). We confirmed the normal morphology of the egg cylinders that had developed from the blastocysts in vitro by recovering them from the gel after time-lapse imaging and staining them with the vital lipophilic dye FM4-64 to reveal individual cells by optical sectioning (Fig. 1e).
Dynamics of the blastocyst to egg cylinder transformation in vitro
We first wished to use this new in-vitro culture/imaging system to describe the developmental events occurring as the blastocysts develop into egg cylinders (Fig. 1f). We observed that during the first day of in vitro culture, the blastocysts underwent expansion and contraction before thickening of the mural trophectoderm became evident during the second day. Higher resolution imaging allowed us to discern the basal lamina, separating the epiblast from the primitive endoderm at this stage (optical sections in Fig. 2a). By the third day of culture, trophoblast cells had migrated across the collagen surface, resulting in spreading and flattening of the embryos, and typical blastocyst morphology was lost. The beginnings of the egg cylinder formation were marked on the fourth day by the appearance of VE and of ExE close to the site of attachment. The embryonic VE and the underlying epiblast then started to 'grow out' from the surface, whereas the extra-embryonic components remained firmly 'implanted' and spread out across the matrix (optical sections in Fig. 2b). Mature egg cylinders were consistently found towards the end of day 4 or on day 5. At this stage, the epiblast developed the shape of a cup surrounding the pro-amniotic cavity and extending towards the extra-embryonic compartment. VE enveloped both the embryonic and extra-embryonic regions of such egg cylinders.
To confirm whether the dimensions of embryos developing in vitro are similar to those developing in utero, we next used the system to culture and image the development of embryos expressing transgenes for Histone H2B-GFP22 and Oct4ΔPE-GFP23 (Oct4 deleted for the proximal enhancer). The former provides a marker for all nuclei, thus facilitating all cells to be followed at successive stages; the latter provides a marker to follow the pluripotent cells before the egg cylinder stage and germ cells thereafter (Supplementary Fig. S2a,b). We found that the embryonic and extra-embryonic compartments of the in-vitro developing egg cylinders, and the dimensions and overall shapes of the cultured embryos were comparable to embryos that had developed in utero (Supplementary Fig. S2c,d and legend).
To further assess the extent to which development in vitro resembles development in utero, we examined and compared the spatial expression of anterior and posterior markers in egg cylinders of the in vitro and in vivo cultured embryos. To this end, we cultured blastocysts derived from a transgenic reporter line in which green fluorescent protein expressed from the Cerl promoter marks the development of AVE14. At the fifth day of development in vitro, the expression of this AVE marker was similar to its pattern in the egg cylinders freshly collected from mothers (Fig. 3a). We also assessed the expression of the posterior marker, Brachyury, through in situ hybridisation and found that as in embryos developing in vivo, its transcripts were present in the opposing (posterior) side and were characteristically restricted to the embryonic/extra-embryonic boundary (Fig. 3a). As a further test for correct development of the anterior, we carried out co-staining for Cerl and another AVE marker, Lefty1. This revealed that these markers are co-expressed at successive stages of AVE development (Fig. 3b,c). Together, these results indicate that the development of AVE in vitro accords with the 'snap-shot' observations made by ourselves and by others, of embryos recovered from pregnant mothers during implantation stages12,13,15,20. Moreover, upon AVE migration, the in vitro-cultured embryos initiate the expression of Brachyury, indicating a proper establishment of AP polarity. As Brachyury expression marks the site of primitive streak formation, this suggests that embryos cultured in vitro are competent to gastrulate.
As a final test, we determined whether the development of exogenous, transplanted embryonic stem (ES) cells would occur correctly in embryos cultured in vitro and therefore would allow us to follow the dynamics of their contribution as the egg cylinder emerges. To this end, we aggregated ES cells expressing the marker gene, dsRed, with eight-cell stage histone H2B-GFP24 host embryos and cultured such chimeras in vitro until the egg cylinder emerged. Our time-lapse observations revealed that the ES cells proliferated and became incorporated mostly into the epiblast rather than the VE or the ExE of the egg cylinder (Fig. 4; Supplementary Movie 4), in accordance with their contribution in embryos developing in utero25.
Taken together, these results indicate that the development of embryos on collagen-coated polyacrylamide matrices permits the emergence of egg cylinders that are similar to those collected from the uteri of pregnant mothers, both in morphology and in patterns of gene expression, as well as in establishment of an AP axis as judged by the expression of both anterior and posterior markers. The proper restriction of ES cells to the epiblast when aggregation chimeras are allowed to develop in vitro is a further indication that the development in vitro recapitulates the development in utero.
AVE-formation dynamics as blastocyst transforms into the egg cylinder
A number of studies have attempted to relate the spatial organisation of the pre-implantation blastocyst to that of the post-implantation egg cylinder, with particular reference to the emergence of the AVE and thus of the AP axis of the embryo13,14,15. However, due to the necessity of transferring pre-implantation embryos to foster mothers to allow their further development, the continuity of these processes was until now impossible to determine. Thus, we next evaluated whether our new in vitro culture system in combination with time-lapse imaging could enable us to follow AVE development as the blastocysts grew into egg cylinders. We collected E3.5 blastocysts from female F1 mice mated with Cerl-GFP male mice and seeded them onto the collagen-coated polyacrylamide hydrogels. We recorded Cerl-GFP expression during continuous development in vitro from its onset in the blastocyst until its consolidation in the AVE (Supplementary Fig. S3a; Supplementary Movie 5). Detailed analyses of these movies allowed us to register the positions of Cerl-GFP-expressing cells in multiple focal planes as development progressed (Fig. 5; Supplementary Movie 6). This revealed the onset of Cerl-GFP expression in one or two cells of the inner cell mass in the free-floating blastocyst (not shown), in accordance with previous observations13,15. We found that at this stage, the Cerl-GFP expression was transient, as when the blastocyst first attached to the culture matrix, the Cerl-GFP expression was not evident. However, Cerl-GFP expression appeared in single primitive endoderm cells and progressively increased in intensity once the blastocysts had completely flattened onto the matrix surface (Fig. 5, Day 3). With time, other primitive endoderm cells surrounding the epiblast began to express Cerl-GFP. These Cerl-GFP-expressing cells were found both in the vicinity of the first expressing cell and in another region within the primitive endoderm (Fig. 5, Day 3). Interestingly, we observed that the emergence of the egg cylinder structure from the flattened blastocyst coincided with the consolidation of the Cerl-GFP-expressing cells into the early AVE domain (Fig. 5, Day 3 to start of Day 4). On the fourth day of culture, as the egg cylinder grew, this Cerl-GFP cluster of cells could be seen to occupy only one side of the embryo (Fig. 5, Day 4). We noticed that the expression of Cerl-GFP was typically heterogeneous in intensity, with some cells showing much higher expression than others (Fig. 5, Supplementary Fig. S3c).
The analyses of these time-lapse observations revealed that Cerl-GFP expression appeared in two clear separate domains in 7 out of 11 embryos studied. This resembles the pattern of Cerl-GFP expression previously reported in snapshot observations of embryos developing in utero15 (compare Cerl-GFP expression patterns in vitro and in vivo in Supplementary Fig. S3b). We observed that, as development progressed, these two Cerl-GFP-expressing domains always coalesced at the distal part of the egg cylinder. Either the first ('older') or the second ('younger') Cerl-GFP domain to arise could develop into the brightest part of the merged domains (Supplementary Fig. S3c). In all cases studied, the outcome was a cluster of cells at the distal part of the egg cylinder that showed a range of Cerl-GFP expression as judged by fluorescence levels. These results indicate that the AVE originates in the implanting blastocyst, but subsequently, an additional domain of cells acquires the AVE characteristics. These 'older' and 'younger' domains coalesce as the egg cylinder emerges from the blastocyst structure.
Asymmetry of the AVE
The time-lapse observations indicated that on day 4 of in vitro culture, one cell within the AVE domain at the distal tip of the egg cylinder showed higher levels of Cerl-GFP expression than its neighbours and was set apart from them (Fig. 5). This prompted us to examine if this heterogeneity of Cerl-GFP levels also exists in vivo and, if so, whether it is of physiological relevance to the subsequent migration of the AVE. We collected embryos that already had AVE positioned at the distal tip of the egg cylinder, and first examined the Cerl-GFP expression levels. We observed a domain of three to nine cells clearly expressing Cerl-GFP at the distal tip of the embryo and positioned slightly, but clearly, towards one side before AVE movement commenced (Fig. 6a, n=6), in agreement with previous observations9,14. We found that a cell expressing higher levels of Cerl-GFP was positioned ahead of other Cerl-GFP-positive cells (Fig. 6a,b; five out of six embryos), suggesting it could be leading migration of the AVE domain. We also observed that this most anteriorly located Cerl-GFP-expressing cell extended projections towards the anterior region and initiated migration in that direction (Fig. 6a, arrows, Supplementary Movie 7). To verify this observation, we analysed the dimensions of these cells by measuring their maximum length and width in relation to their long axis in in-vitro-developed egg cylinders and freshly collected embryos. This revealed that the most anteriorly located Cerl-GFP-expressing cell became significantly more elongated with time in comparison with the cuboidal cells following its migratory trajectory, and that this was the case for both embryos developing in vivo or in vitro (Fig. 6c–e). Quantification of Cerl-GFP fluorescence indicated that the greater the intensity, the more elongated the cell (Fig. 6e). These results indicate an asymmetry in the expression of the AVE marker gene and suggest that the cell expressing Cerl-GFP at the highest levels might be the cell that leads AVE migration.
AVE asymmetry dictates the direction of its migration
We wished to determine whether the asymmetric distribution of cells strongly expressing Cerl-GFP is important for the subsequent directionality of AVE migration. To this end, we laser ablated individual cells within the AVE domain showing differences in the levels of Cerl-GFP expression and followed the consequences for AVE behaviour. Having ensured that laser ablation of a target cell had no effects upon neighbouring cells (Supplementary Fig. S4a,b), we first ablated the leading AVE cell, which showed the highest level of Cerl-GFP expression (Fig. 7). This had a dramatic effect on AVE behaviour. In all 14 embryos examined, ablation of this leading cell abolished the migration of all AVE cells and prevented expansion of the AVE domain (Fig. 7a; Supplementary Movies 7 and 8; Supplementary Fig. S4c). To determine to what extent the failure of AVE migration reflected some unique quality of its leading cell or a general property of the entire AVE domain, we next ablated individual cells at different positions in the AVE. We found that ablation of the cell immediately following the pioneer was also effective in preventing AVE migration; however, it still allowed an increase in the number of the Cerl-GFP cells (Fig 7b; n=10; Supplementary Fig. S4d). In contrast, ablation of a cell in the central domain of the trailing group of Cerl-GFP-expressing cells permitted anterior migration and AVE expansion, although to a slightly lesser extent than in control embryos (Fig. 7b; n=5; Supplementary Fig. S4e). Ablation of Cerl-GFP-negative cells in the VE ahead of the leading cell had no effect on either AVE migration or its expansion, suggesting that cell ablation per se is not likely to provide a physical barrier to cell migration (Fig. 7b, n=5). These results indicate that AVE migration is led by cells expressing the highest levels of AVE marker genes and therefore, suggest that the asymmetry within the AVE domain drives the direction of its migration. The fact that ablation of a single leading cell or its immediate follower could prevent AVE migration suggests that AVE migrates as a continuous sheet of cells, and that this is important for the correct establishment of the AP axis.
Studies of the genesis of AP polarity in the mouse embryo have been restricted by the inaccessibility of the embryo during the pre- to post-implantation transition when this primary body axis becomes established. To overcome this difficulty, we have developed an in-vitro culture system that is compatible with time-lapse confocal microscopy to directly visualise how the AP axis emerges as the egg cylinder grows out of the blastocyst structure. Several lines of evidence indicate that this new approach for in vitro culture and imaging recapitulates development outside the body of the mother. First, embryos developing in vitro acquire the correct morphology and spatio-temporal expression patterns of key marker genes, indicating proper organisation of the epiblast, trophectoderm- and primitive endoderm-derived tissues in the egg cylinder. Second, they undergo rapid growth, concomitant with the formation of the proamniotic cavity, as is the case in embryos developing in the mother. Third, they develop the AVE in accordance with snapshot observations of embryos sampled from mothers at successive implantation stages13,15,20. Fourth, upon AVE migration, they initiate expression of the posterior marker, Brachyury, indicating proper establishment of AP polarity and competence to initiate gastrulation. Fifth, exogenous ES cells become incorporated into the appropriate tissues of the egg cylinder as it develops in vitro. Together, these results indicate that this new in-vitro culture/imaging system provides a reliable in vitro platform that recapitulates development in the uterus and enables us to follow the step-wise development of AP polarity in relation to egg cylinder morphogenesis. The future use of this platform should allow further characterisation of the cellular interactions between different lineages as the blastocyst transforms into the egg cylinder.
The ability to culture mouse embryos on collagen-coated polyacrylamide matrices enabled us to follow the dynamics of AVE formation by time-lapse confocal microscopy. We show that the first cells to express Cerl-GFP develop in the inner cell mass of the pre-implantation blastocyst, but that this expression is only transient. Cerl expression becomes again evident in the primitive endoderm as the blastocyst 'implants', that is, after the trophectoderm cells have spread out on the culture substrate and the blastocyst is flattened. We show that this early expression continues, but also additional cells start to express the AVE markers. Typically, these two, 'older' and 'younger' AVE domains become consolidated by the time the egg cylinder emerges. These findings are in agreement with, and provide an explanation to, our previous snap-shot observations15 and also support a recent report indicating that cells which start to express another AVE marker, Lefty1, in the implanting blastocyst participate in establishing the AVE13. As confirmation of this, our analyses of fixed embryos that develop either in vivo or in vitro indicate that the expression domains of Cerl and Lefty1 are coincident and lie opposite the posterior expression domain of Brachyury. It is important to note that, although we show that Cerl-GFP expression is initiated in individual blastocyst cells, it remains unknown whether these cells arise stochastically or in relation to some feature of the blastocyst's development, an interesting topic for future detailed investigation.
Once the AVE domains have consolidated at the distal tip of the egg cylinder, we find that cells that express the AVE markers at higher levels than their neighbours lead the AVE migration process. This result is in agreement with recent findings that AVE cells are migrating actively rather than being pushed by other VE cells26,27. This is also in accord with studies showing that embryos carrying mutations in genes essential for cell migration exhibit a defective AVE movement28. Our results indicate that the integrity of cells that lead AVE migration and their surrounding community is required for the migratory process. This is because ablation of both the leading and following cells prevents AVE migration and expansion. In other words, our results suggest that AVE migration is a collective process and requires the group of AVE cells to act as a migratory community. However, we show that ablation of a central cell within the AVE domain and expressing its markers less intensively still permits considerable AVE migration and expansion. Taken together, these results point to two broad classes of cells within the AVE, one group that leads to the migration and another that might be carried along by this process. These findings echo a recent report, which showed that following genetic ablation of Lefty1-expressing cells soon after embryo implantation, the AVE was formed but failed to migrate13. Therefore, these two studies that analyse the expression of different AVE markers in embryos cultured either in vitro or in utero each suggest that the anterior migration of the AVE is guided by an independent sub-set of AVE cells.
Although Cerl-GFP expression is an excellent marker of the AVE, Cerl expression on its own is not essential for the development of the AP axis29, which requires both Cerl and Lefty1 acting together30. At present, we cannot determine unequivocally whether the differing cellular behaviour we assign to AVE cells is a specific consequence of differential levels of Cerl expression or rather a more general property of cells marked in this way. Several possibilities could account for why the highest Cerl-expressing cells might act as pioneers in AVE migration. It might be that, within the AVE domain, these are the cells that are the most responsive to an attractant or cue. In such a case, the leading AVE cells would be passive responders to external signals rather than having their pioneer properties determined by the high level of Cerl expression. Moreover, it is possible that the asymmetry within the AVE would result in its unidirectional migration in response to a symmetric signal originating, for example, from the ExE8,9,10,31,32. Alternatively, by expressing the highest levels of Cerl and Lefty1, which are Nodal antagonists, the leading AVE cells and their immediate neighbours would suppress Nodal activity in their vicinity, thus facilitating a stepwise migration. Any asymmetry in the levels of Cerl expression could be reinforced by such a process and migration would proceed unidirectionally. Understanding whether these or other mechanisms drive AVE migration will require gaining greater understanding of the cell biology of these processes. The accessibilty of embryos at this stage of development for experimentation opens up real possibilities for achieving such goals.
Embryo collection, culture and staining
F1 (C57BL/6XCBA) blastocysts from either wild-type or appropriate transgenic matings (as indicated in the text) were collected into M2 medium with 4 mg ml−1 of bovine serum albumin as described previously15,20. Zona pellucidae were removed by treatment with acidic Tyrode's solution as described previously15. After recovery, embryos were were seeded in single wells of 24-well plates in 400 μl of in-vitro culture medium 1 (IVC1: CMRL-1066 (Invitrogen) supplemented with 200 mM L-glutamine (Invitrogen), 100 mM sodium pyruvate (Invitrogen), penicillin and streptomycin (Invitrogen), and 20% fetal calf serum (FCS, Invitrogen) either in plastic tissue culture dishes or on polyacrylamide matrices (see below). For plastic tissue culture dishes, drops of 5 μl were used. On the evening of day 2, the medium was replaced by mouth pipetting with in-vitro culture medium 2 (IVC2), which is identical to IVC1, except for the serum component for which we used 20% human cord serum (HCS, Addenbrokes Hospital, Cambridge, UK). IVC2 media was replaced on a daily basis for the remainder of the culture. For post-implantation studies, E5.5 embryos were collected from F1 females mated with Cer-l-GFP males and cultured in IVC2. All embryo cultures were performed at 37 °C in a 5% CO2 atmosphere. The fluorescent in-situ hybridisation was performed as described before33. Immunostaining was carried out as previously described15.
Polyacrylamide gels for embryo culture
Polyacrylamide gels of characterised surface stiffness, covalently bonded to glass substrates, have been used to allow the mouse embryo culture in well plates and petridishes, and simultaneous time-lapse confocal imaging. Circular grade 1 borosilicate glass coverslips (Menzel-Gläser, Thermo Scientific) were cleaned in a 0.1-M sodium hydroxide solution (>98%, Sigma-Aldrich). Successive dip-coating in APTMS (97%, Sigma-Aldrich) and 0.5% glutaraldehyde solutions (∼50% solution, Fluka/Biochemika, Sigma-Aldrich) were then carried out, with wash-steps in distilled water after each APTMS and glutaraldehyde treatment. Polyacrylamide gel solutions were made containing varying concentrations of N, N'-methylenebisacrylamide solution (2% in water, Fluka/Biochemika, Sigma-Aldrich), from 0.02 to 0.5%, and 10% acrylamide solution (40% in water), Fluka/Biochemika, Sigma-Aldrich. Polyacrylamide gel was polymerised using 10% ammonium persulphate solution (98%, Sigma-Aldrich) in distilled water (1:167 volume), and NNN'-M-Tetramethylethyldiamine (TEMED; Sigma-Aldrich; 1:250 volume). Initial screening of embryo attachment was carried out using gels varying in N′N′-methylenebisacrylamide concentration, but data reported is from embryos cultured on hydrogels of 0.3% N′N′-methylenebisacrylamide concentration. Polyacrylamide surfaces were coated with the extracellular matrix component, collagen. A 0.2 mg ml−1 water solution of type I rat-tail collagen (9.92 mg ml−1, BD Bioscience) was attached to the polyacrylamide gels using a 0.5 mg ml−1 in water solution of ultraviolet light-activated heterobifunctional molecule, sulfo-SANPAH (Pierce Biotechnology).
The stainless steel mould for moulding gels into the correct shape was a proprietary design and manufactured by the Precision Manufacturing Centre (University of Nottingham). The mould was fabricated from 6-mm thick stainless steel. Embryos were cultured in one large cylindrical well in the centre of the gel (1130 μm diameter, 300 μm height). All wells have a base thickness from 100 μm up to 500 μm.
To increase the imaging resolution at ×40 magnification, 24-well glass bottom well plates were used (PAA Laboratories GmbH, Austria). These imaging plates were already pre-functionalised with amino groups. Functionalising the imaging surface of the wells with polyacrylamide gels was carried out by applying 100 μl of 0.5% glutaraldehyde solution, then washing with distilled water. A volume of 10 μl of polyacrylamide gel solution was then applied to the imaging surface in the well. A grade 1 circular glass coverslip of 12-mm diameter (Menzel-Gläser, Thermo Scientific) was then placed on top of the gel solution. Once the gel had cured, the coverslip was removed. The method of functionalisation of the polyacrylamide gels in well plates with type I rat-tail collagen is the same as for individual gels.
Time-lapse confocal imaging
Time-lapse imaging during in vitro culture and following laser ablation of selected cells (see below) was performed using a confocal spinning-disc microscopy system (Intelligent Imaging Solutions). Confocal images were acquired with a QuantEM:512SC camera (Photometrics) and wide-field images on the same microscope with a CoolSnapHQ camera (Photometrics). Objectives used were a ×20 Air EC Plan Neofluar, NA 0.5, and a ×40 Air EC Plan Neofluar, NA 0.75 (Zeiss). Image stacks with 3.5 or 5 μm z-planes were captured every 12–30 min, scanning up to 100 μm up to the pre-egg cylinder stage, and up to 150 μm in the egg cylinder stage. Imaging had to be interrupted for changing medium and adjusting to the best focal plane and therefore, the data provided from time-lapse observations are often a compilation of several captures. Image processing and analysis was performed with Slidebook 184.108.40.206 or superior Image J and Adobe Photoshop.
Elimination of the selected cell by laser irradiation was performed with an Olympus inverted FV1000 microscope with the 405-nm laser irradiating for 500 ms in the selected area. Confocal images of embryos were captured before and after ablation, and following 16 h of culture using the same system. Where indicated, fluorescence intensity was measured using ImageJ software.
Animals were maintained in the Animal Facility of Gurdon Institute at 12:12 light cycle and provided with food and water ad libitum. All experiments were conducted in compliance with Home Office regulations.
How to cite this article: Morris, S. A. et al. Dynamics of anterior–posterior axis formation in the developing mouse embryo. Nat. Commun. 3:673 doi: 10.1038/ncomms1671 (2012).
Thomas, P. Q., Brown, A. & Beddington, R. S. Hex: a homeobox gene revealing peri-implantation asymmetry in the mouse embryo and an early transient marker of endothelial cell precursors. Development 125, 85–94 (1998).
Beddington, R. S. & Robertson, E. J. Axis development and early asymmetry in mammals. Cell 96, 195–209 (1999).
Weber, R. J., Pedersen, R. A., Wianny, F., Evans, M. J. & Zernicka-Goetz, M. Polarity of the mouse embryo is anticipated before implantation. Development 126, 5591–5598 (1999).
Srinivas, S., Rodriguez, T., Clements, M., Smith, J. C. & Beddington, R. S. Active cell migration drives the unilateral movements of the anterior visceral endoderm. Development 131, 1157–1164 (2004).
Brennan, J. et al. Nodal signalling in the epiblast patterns the early mouse embryo. Nature 411, 965–969 (2001).
Robertson, E. J., Norris, D. P., Brennan, J. & Bikoff, E. K. Control of early anterior-posterior patterning in the mouse embryo by TGF-beta signalling. Philos. Trans. R. Soc. Lond. B Biol. Sci. 358, 1351–1357; discussion 1357 (2003).
Yamamoto, M. et al. Antagonism between Smad1 and Smad2 signaling determines the site of distal visceral endoderm formation in the mouse embryo. J Cell Biol 184, 323–334 (2009).
Rodriguez, T. A., Srinivas, S., Clements, M. P., Smith, J. C. & Beddington, R. S. Induction and migration of the anterior visceral endoderm is regulated by the extra-embryonic ectoderm. Development 132, 2513–2520 (2005).
Richardson, L., Torres-Padilla, M. E. & Zernicka-Goetz, M. Regionalised signalling within the extraembryonic ectoderm regulates anterior visceral endoderm positioning in the mouse embryo. Mech. Dev. 123, 288–296 (2006).
Soares, M. L. et al. Functional studies of signaling pathways in peri-implantation development of the mouse embryo by RNAi. BMC Dev. Biol. 5, 28 (2005).
Soares, M. L., Torres-Padilla, M. E. & Zernicka-Goetz, M. Bone morphogenetic protein 4 signaling regulates development of the anterior visceral endoderm in the mouse embryo. Dev. Growth Differ. 50, 615–621 (2008).
Takaoka, K. et al. The mouse embryo autonomously acquires anterior-posterior polarity at implantation. Dev Cell 10, 451–459 (2006).
Takaoka, K., Yamamoto, M. & Hamada, H. Origin and role of distal visceral endoderm, a group of cells that determines anterior-posterior polarity of the mouse embryo. Nat. Cell. Biol. 13, 743–752 (2011).
Mesnard, D., Filipe, M., Belo, J. A. & Zernicka-Goetz, M. The anterior-posterior axis emerges respecting the morphology of the mouse embryo that changes and aligns with the uterus before gastrulation. Curr. Biol. 14, 184–196 (2004).
Torres-Padilla, M. E. et al. The anterior visceral endoderm of the mouse embryo is established from both preimplantation precursor cells and by de novo gene expression after implantation. Dev. Biol. 309, 97–112 (2007).
Hsu, Y. C. Differentiation in vitro of mouse embryos beyond the implantation stage. Nature 239, 200–202 (1972).
Hsu, Y. C. Differentiation in vitro of mouse embryos to the stage of early somite. Dev. Biol. 33, 403–411 (1973).
Hsu, Y. C. In vitro development of individually cultured whole mouse embryos from blastocyst to early somite stage. Dev. Biol. 68, 453–461 (1979).
Tachi, C. Partial characterization of macromolecular components in fetal bovine serum required for development of mouse blastocysts cultured in vitro. Dev. Growth Differ. 34, 69–77 (1992).
Perea-Gomez, A. et al. Regionalization of the mouse visceral endoderm as the blastocyst transforms into the egg cylinder. BMC Dev. Biol. 7, 96 (2007).
Engler, A. J., Sen, S., Sweeney, H. L. & Discher, D. E. Matrix elasticity directs stem cell lineage specification. Cell 126, 677–689 (2006).
Hadjantonakis, A. K. & Papaioannou, V. E. Dynamic in vivo imaging and cell tracking using a histone fluorescent protein fusion in mice. BMC Biotechnol. 4, 33 (2004).
Yeom, Y. I. et al. Germline regulatory element of Oct-4 specific for the totipotent cycle of embryonal cells. Development 122, 881–894 (1996).
Eakin, G. S. & Hadjantonakis, A. K. Production of chimeras by aggregation of embryonic stem cells with diploid or tetraploid mouse embryos. Nat. Protoc. 1, 1145–1153 (2006).
Beddington, R. S. & Robertson, E. J. An assessment of the developmental potential of embryonic stem cells in the midgestation mouse embryo. Development 105, 733–737 (1989).
Stuckey, D. W. et al. Coordination of cell proliferation and anterior-posterior axis establishment in the mouse embryo. Development 138, 1521–1530 (2011).
Trichas, G. et al. Nodal dependent differential localisation of dishevelled-2 demarcates regions of differing cell behaviour in the visceral endoderm. PLoS Biol. 9, e1001019 (2011).
Migeotte, I., Omelchenko, T., Hall, A. & Anderson, K. V. Rac1-dependent collective cell migration is required for specification of the anterior-posterior body axis of the mouse. PLoS Biol. 8, e1000442 (2010).
Belo, J. A. et al. Cerberus-like is a secreted factor with neutralizing activity expressed in the anterior primitive endoderm of the mouse gastrula. Mech. Dev. 68, 45–57 (1997).
Perea-Gomez, A. et al. Nodal antagonists in the anterior visceral endoderm prevent the formation of multiple primitive streaks. Dev. Cell 3, 745–756 (2002).
Mesnard, D., Guzman-Ayala, M. & Constam, D. B. Nodal specifies embryonic visceral endoderm and sustains pluripotent cells in the epiblast before overt axial patterning. Development 133, 2497–2505 (2006).
Mesnard, D. & Constam, D. B. Imaging proprotein convertase activities and their regulation in the implanting mouse blastocyst. J. Cell. Biol. 191, 129–139 (2010).
Jedrusik, A. et al. Role of Cdx2 and cell polarity in cell allocation and specification of trophectoderm and inner cell mass in the mouse embryo. Genes Dev. 22, 2692–2706 (2008).
We are grateful to Professor David Glover for his comments on the manuscript, Professor Azim Surani and Caroline Lee for kindly providing Oct4ΔPE-GFP mice, and Harry Leitch for providing the dsRed ES cells. F. B. holds a Newton International Fellowship from the Royal Society, which supported this work. This work was supported by a Wellcome Trust Senior Fellowship to M. Z. G.
The authors declare no competing financial interests.
Supplementary Figures S1-S4, Supplementary Tables S1-S3 and Supplementary References (PDF 4422 kb)
Live imaging of a representative embryo throughout development in vitro, from the blastocyst to the egg cylinder stage. The movie is a compilation of consecutive movies of the same embryo made through this time period with a 20x objective. (MOV 14500 kb)
Live imaging of a representative embryo throughout development in vitro, from the blastocyst to the egg cylinder stage. The movie is a compilation of consecutive movies of the same embryo made through this time period with a 20x objective. (MOV 8864 kb)
Live imaging of a representative embryo throughout development in vitro, from the blastocyst to egg cylinder stage. The movie shown is a compilation of consecutive movies of the same embryo made through this time period starting with a 20x objective and enhancing resolution with a 40x lens after the embryos had attached to the gel. (MOV 12910 kb)
Time-lapse confocal imaging of development of chimeric embryos, on collagen-coated hydrogels, from the implanting blastocyst stage (late Day 2) to the egg cylinder stage (Day 4). dsRed-ES cells were aggregated with H2B-GFP embryos at the 8-cell stage. The movie is a compilation of consecutive movies of the same embryo made through this time period with a 40x objective. DIC channel shows a selected focal plan throughout the observations. GFP and RFP images are a maximum intensity projection over the z-axis of confocal sections. (MOV 2033 kb)
Live imaging of a representative Cerl-GFP embryo throughout development in vitro, from the blastocyst to the egg cylinder stage. The movie is a compilation of consecutive movies of the same embryo made throughout development with a 20x objective. GFP is a maximum intensity projection over the z-axis. (MOV 8101 kb)
Cerl-GFP embryo developing on a collagen-coated polyacrylamide matrix from the blastocyst to the egg cylinder stage. DIC channel shows a selected focal plane throughout the observations. GFP image is a maximum intensity projection over the z-axis of confocal sections. 10 hours of filming between day 2 and day 3 have been omitted, as they are not informative. (MOV 4461 kb)
Live imaging of AVE migration in control embryos expressing Cerl- GFP and recovered from mothers at E5.5. (MOV 284 kb)
Live imaging of Cerl-GFP expressing embryos in which the pioneer cell was ablated at E5.5. (MOV 8007 kb)
About this article
Cite this article
Morris, S., Grewal, S., Barrios, F. et al. Dynamics of anterior–posterior axis formation in the developing mouse embryo. Nat Commun 3, 673 (2012). https://doi.org/10.1038/ncomms1671
This article is cited by
Stem Cell Reviews and Reports (2022)
Embryotoxic effects of tribromophenol on early post-implantation development of mouse embryos in vitro
Environmental Science and Pollution Research (2022)
A single cell characterisation of human embryogenesis identifies pluripotency transitions and putative anterior hypoblast centre
Nature Communications (2021)
Reproductive Sciences (2021)
Nature Cell Biology (2018)