Periclase (MgO) is the second most abundant mineral after bridgmanite in the Earth’s lower mantle, and its melting behaviour under pressure is important to constrain rheological properties and melting behaviours of the lower mantle materials. Significant discrepancies exist between the melting temperatures of MgO determined by laser-heated diamond anvil cell (LHDAC) and those based on dynamic compressions and theoretical predictions. Here we show the melting temperatures in earlier LHDAC experiments are underestimated due to misjudgment of melting, based on micro-texture observations of the quenched samples. The high melting temperatures of MgO suggest that the subducted cold slabs should have higher viscosities than previously thought, suggesting that the inter-connecting textural feature of MgO would not play important roles for the slab stagnation in the lower mantle. The present results also predict that the ultra-deep magmas produced in the lower mantle are peridotitic, which are stabilized near the core–mantle boundary.
Investigating the melting behaviours of terrestrial materials at high pressure is important in addressing generation of magmas and associated differentiation processes in the Earth’s deep interior1. Experiments using multianvil apparatus have provided detailed melting relations of model mantle materials at high pressure and temperature, which have been used to constrain the formation of the deep magma ocean and subsequent chemical differentiation of the deep mantle2,3. However, these experiments have been limited to pressures up to ∼30 GPa, equivalent to the depths of the uppermost region of the lower mantle, due to the limitation in pressure and temperature generation in conventional multianvil technology using tungsten carbide as the second-stage anvils. Although recent developments of this technology using sintered polycrystalline diamond anvils expanded the pressure limit to ∼100 GPa4, the temperatures available under such pressures have been limited to below 2,000 K, which are insufficient to study the melting relations of mantle materials.
Static high-pressure experiments using laser-heated diamond anvil cell (LHDAC)5,6,7,8,9, as well as those by dynamic compression10,11,12 and ab initio calculations13,14,15,16,17, have been attempted to constrain the melting relations of peridotitic mantle rocks and of relevant major minerals, such as MgSiO3 bridgmanite and MgO, under the lower mantle conditions. The composition of the partial melt in the lower mantle can be reasonably modelled by the eutectic composition in the melting relation of the MgO–MgSiO3 system18, which can be evaluated by the melting curves of these two end-member minerals. However, the melting relation of this binary system has not been well constrained because of the large discrepancies in experimentally and theoretically determined their melting curves, particularly for MgO (ref. 19). The melting behaviour of the MgO end-member is highly controversial among previous studies: a pioneering work using LHDAC reported a melting curve with a dTm/dP of ∼30 K GPa−1 at zero pressure, which was extrapolated from the experiments up to ∼30 GPa6, while several theoretical computations gave substantially higher dTm/dP of 90–120 K GPa−1 (refs 13, 14, 15). A recent shock experiment showed the melting of the high-pressure B2 phase of MgO at ∼14,000 K at ∼650 GPa12, which is consistent with the theoretically predicted higher melting slopes rather than the result of the LHDAC experiment. Furthermore, the melting curves of MgO inferred from recent two melting experiments on the (Mg,Fe)O solid solution20,21 do not agree with each other. Such inconsistency of the earlier melting curves of MgO is a major reason for the poorly constrained melting relations of the lower mantle materials19.
Determination of melting temperatures of MgO under the lower mantle pressures is also important to constrain the rheological behaviours of the lower mantle and subducting slabs. It has been predicted that the cold slab of peridotitic compositions, modelled by a mixture of MgSiO3 bridgmanite and MgO, would become significantly soft due to the formation of inter-connection of the latter mineral with viscosity substantially lower than that of MgSiO3 bridgmanite at relatively low temperatures in the slab22,23. However, the viscosities of these minerals under the lower mantle conditions have been estimated based on their homologous temperatures (T/Tm), which should have large uncertainties for MgO.
Here we determine the melting temperatures of MgO at pressures up to ∼50 GPa using micro-texture observations of the quenched products in LHDAC by optical and scanning, and transmission electron microscopy, combined with the careful observations of the relation between the laser power and the temperature of the sample. We show two plateaus in the temperature increase with increasing input laser power, and interpret the first plateau is because of the significant plastic deformation of the sample together with Re gasket while the second one corresponds to the melting of the sample. The results of the earlier LHDAC study reporting a shallow melting curve for MgO, as well as those for some refractory metals24,25, are likely attributed to miss-assignment of the former phenomenon to the melting of the sample, leading to a substantial underestimation of the melting temperatures under high pressure.
Laser power versus temperature profiles
We performed a series of LHDAC experiments using single crystal MgO as the starting material, which was loaded in a sample chamber together with an argon pressure medium. Temperature was determined by fitting each thermal radiation spectrum that was collected from the sample under laser-heating using the Planck’s function (Fig. 1a and Supplementary Fig. 1)26. We first performed a melting experiment of MgO at ambient pressure to check the validity of the temperature measurement in our optic system. A clear temperature plateau was found at 3,010±140 K in the power versus temperature profile (Fig. 1b), which agrees well with the reported melting temperature of MgO (3,098±42 K; ref. 27). Such a temperature plateau was also observed in the previous melting experiment using LHDAC6 at high pressure and is thought to be usable for detecting melting of MgO at least at ambient pressure.
Figure 2 shows examples of the laser power versus temperature relationship obtained during heating in two separate runs at 32 and 33 GPa. In both cases, a plateau was observed in the range of 3,500–3,800 K of the power versus temperature profile (Fig. 2a). This temperature range corresponds to the melting temperature of MgO proposed by the earlier LHDAC study6. The radial temperature distribution across the MgO crystal under heating at this temperature range showed a standard Gaussian distribution (Fig. 2b). While the sample morphology did not clearly change during heating to the temperature just before the plateau (Fig. 2c,d), the sample quenched from the temperature plateau (point ‘e’ in Fig. 2a) was found to have expanded by ∼25 % in the lateral direction (perpendicular to the compression axis) (Fig. 2e) along with the outward deformation of the sample chamber (gasket). The expansion of the sample chamber and sample was probably caused by the plastic flow of the Re gasket, which was induced at very high temperatures, as discussed later. Such a significant deformation (expansion) of the sample chamber was also observed in other runs performed at similar and lower/higher pressures (Supplementary Fig. 2), suggesting that this is an essential phenomenon in the present high temperature heating by CO2 laser. When the sample was further heated to above 5,000 K, another plateau was observed in the power versus temperature profile (Fig. 2a). The temperature range of this second plateau is higher by 1,500–1,700 K than the first one and is well comparable to the theoretically predicted melting temperature of MgO (refs 13, 14, 15) at the corresponding pressure. The radial temperature distribution obtained during heating at the second plateau was found to become flat (Fig. 2b), compared with that obtained at lower temperatures. This flattening is likely due to a rapid increase in heat transfer caused by the convection of the MgO melt in a wide area, as discussed later. Unlike the case of the first plateau, neither deformation of the sample itself nor the sample chamber was observed.
Figure 3 shows typical examples of cross-sections of the samples recovered from two experiments in which they were heated to the temperatures of the first and second plateaus, respectively, and quenched (then decompressed). The laser-heated area (hot spot) of the sample quenched from the first plateau (Fig. 3a,b) consists of granular crystals of a few μm that are randomly aggregated as confirmed by electron diffraction in transmission electron microscope (TEM) (Fig. 3c). Many small voids were found at grain boundaries (mostly at triple junctions) and are likely remnants of liquid Ar that was formed and trapped during grain growth (recrystallization) of MgO at high temperature (Fig. 3c). On the other hand, in the low-temperature region (around the hot spot) the sample showed characteristic stripe patterns composed of significantly deformed and elongated domains as can be seen in the SEM image (Fig. 3d). TEM observation on a cross-section foil prepared from this region revealed that the individual domains are single crystal MgO with considerable amounts of dislocations, which are in contact with each other by low-angle grain boundaries (Fig. 3e). These features are evidence for the extensive shear deformation of the starting sample (single crystal MgO) during heating at the first plateau. The sample deformation was probably initiated with the thermally induced plastic flow of the gasket, which produced a large shear stress in the direction perpendicular to the compression axis. This also resulted in considerable thinning of the sample and Ar pressure medium, significantly affecting the heating efficiency of the sample under laser irradiation. The observed first temperature plateau was most likely due to such flattening behaviour of the sample under deformation, which was also theoretically predicted to be caused by heterogeneous thermal stress in the sample28. Although such a significant deformation of sample/gasket was not observed in the earlier melting experiment on (Mg,Fe)SiO3 perovskite, it was likely due to stress relaxation caused by the phase transition of the starting material (Supplementary Note 2).
On the other hand, the sample recovered from the second plateau (∼5,200 K at 32 GPa) showed a characteristic internal texture in the hot spot: a pair of layers composed of small granular crystals at the upper and lower edges and relatively large columnar crystals that are elongated perpendicular to the outer rims (Fig. 3f,g). This is well comparable to the solidification texture typically shown in metal casting29. The outermost layers are considered to be chilled margins in which multiple nucleation of equigranular crystals occurred on quenching of the MgO melt. Subsequent to the formation of the chilled margins, larger columnar crystals grew inward from the rim due to the vertical heat flow in the sample chamber. It should also be noted that many small voids with spheroidal forms were found as inclusions within the individual columnar crystals (Fig. 3h and Supplementary Fig. 3). This fact also supports the direct solidification of the columnar crystals from MgO melt into which a part of Ar pressure medium was entrained as immiscible droplets. In the low-temperature region, the single crystal domains having a number of dislocations (Fig. 3i,j), similar to those observed in the low-temperature region of the sample quenched from the first plateau, were observed.
Melting temperatures of MgO
Figure 4 shows plots of our melting temperatures, Tm of MgO together with the results of previous experimental studies and theoretical predictions. Fitting our Tms to the Simon equation30 yields dTm/dP of 103 K GPa−1 at zero pressure, which is significantly higher than that obtained from the previous LHDAC experiments (∼30 K GPa−1; ref. 6). The Tms of their study may have been substantially underestimated, since they are very close to the first temperature plateau in our study (Fig. 2), which was not caused by melting, but by plastic deformation of the sample (sample chamber). Note that the dTm/dP of our melting curve is consistent with those of the theoretical predictions (90–120 K GPa−1; refs 13, 14, 15) as well as the estimation based on the Clausius–Clapeyron equation using the experimentally constrained volume and entropy changes through the melting (∼100 K GPa−1; ref. 31). Moreover, our melting curve agrees very well with that estimated based on Lindemann’s relation using the experimentally determined Grüneisen parameter32. Extrapolation of the present melting curve of MgO to the pressure of the CMB (135 GPa) gives a melting temperature of ∼7,900 K, which is much higher than an expected geotherm temperature (∼4,000 K) calculated from an outer-core adiabat and melting experiments on iron alloys33.
The melting curve of MgO determined by the present experiments yields melting relations in the MgO–MgSiO3 system at pressures throughout the lower mantle, which provides some insight into the chemical composition of the deep magma. For example, seismologically observed ultra-low velocity zone (ULVZ) near the core–mantle boundary (CMB) is believed to be caused by the partial melting of the lowermost mantle1,7, where the melt composition can be inferred from the eutectic composition in the MgO–MgSiO3 system. The previously reported gentle melting curve of MgO (ref. 6) results in an intersect with that of MgSiO3 bridgmanite at ∼50 GPa5, suggesting that the eutectic composition is located on the MgO-rich side relative to the peridotite composition at the CMB pressure6,33. However, the present steeper MgO melting slope offers eutectic compositions rather on the siliceous side throughout the lower mantle conditions. This means that the ultra-deep magmas responsible for the ULVZ are indeed peridotitic, as predicted by some earlier studies18. Taking into account the sink/float relationship between magma and solid mantle in the deep mantle34, a considerable amount of iron (Fe/(Mg+Fe) >0.24) is required to be incorporated into such peridotitic partial melt so that it is gravitationally stable to form the ULVZs at the bottom of the lower mantle. This scenario is also supported by the latest experimental study9 on the Fe–Mg partitioning between the partial melt and solidus phases at the lowermost mantle conditions.
The rheological behaviour of the lower mantle is largely controlled by the viscosities of MgSiO3 bridgmanite and MgO. The viscosity of MgO was estimated to be three orders of magnitude lower than that of MgSiO3 bridgmanite based on the homologous temperature scaling using their melting curves22. This viscosity contrast between these minerals would cause rheological weakening of cold slabs subducted into the lower mantle because of the textural inter-connection of the softer MgO (ref. 23), resulting in slab stagnation at a depth of ∼1,000 km as observed by seismic tomography beneath some subduction zones35,36. However, the viscosity estimation by the homologous temperature scaling depends largely on the melting temperatures, Tms, and the viscosity model22 was calculated based on the significantly underestimated Tms by the earlier LHDAC study6 (Fig. 5). Recalculation using our refined Tms yields much higher viscosity for MgO, almost equivalent to that of MgSiO3 bridgmanite, under the lower mantle conditions (Fig. 5). This suggests that the rheological weakening would not occur in the cold subucting slabs, and the viscosity difference between the slab and the surrounding lower mantle may not be an important factor in the slab stagnation seismologically observed at ∼1,000 km depth35,36.
Determination of the melting temperature of refractory metals such as Mo, Ta and W at high pressure by LHDAC experiments is also difficult and remains controversial (for example, refs 24, 25); the observed melting curves are significantly lower than those by shock-wave experiments37 and theoretical calculations38, as is the case for MgO. The result of the present study suggests a possibility that shear-induced anisotropic plastic flow39 is also responsible for the anomalously low-temperature melting curves of these metals determined by the earlier LHDAC experiments. The present study demonstrates that the combination of in situ observation of the laser power versus temperature relations and the detailed micro-texture analyses of the quenched sample is an effective and reliable approach for determining the melting temperatures of such refractory materials under very high pressure.
Single crystal MgO samples were loaded into a sample chamber with 100–150 μm diameter and 50 μm thick drilled in a preindented Re gasket in a diamond anvil cell (DAC). MgO sample was mechanically polished to adjust the thickness to 25–30 μm before loading. We used Ar pressure medium which provides chemically inert, thermally insulating, and virtually hydrostatic conditions. The sample was compressed to the target pressure at room temperature using flat top diamond anvils with 300 or 450 μm culets.
High P–T experiment
A CO2 laser (10.6 μm, CW, TEM00) system was adopted for the heating of the MgO sample which shows high absorption for the wavelength. Double-sided heating system equipped with a pair of 100 W CO2 laser (Synrad, firestar t100) providing a Gaussian intensity distribution was used to reduce the temperature gradient across the axial direction of the sample chamber. The full width at half maximum (FWHM) of the heated (hot spot) region was approximately 60 μm, which was estimated by fitting the 1D temperature profile to the Gaussian function (Fig. 2b). The detail of the CO2 laser-heating system is described in our previous report26. Temperature was determined by fitting the thermal radiation emitted from the sample under heating to the following Planck’s function:
where I is measured intensity at each wavelength λ. C1 and C2 are constants and ɛ is the emissivity, which is assumed to be independent of λ in the observed wavelength range33. Each thermal radiation spectrum was measured from 2.5 × 2.5 μm2 area at the centre of the heated region. For the Planck’s fitting, the wavelength range from 500 to 800 nm was used. Figure 1a and Supplementary Fig. 1 show examples of the radiation spectrum obtained from MgO under heating at ambient pressure and at 18 GPa, respectively. Examples of the lateral temperature distribution are shown in Fig. 2b. The temperature at each laser power was determined by reading the peak value of the lateral temperature distribution profile. The temperature was determined by measuring the radiation from the both sides of the cell. The temperature uncertainty was given by considering the difference in temperature between the both sides. The melting temperature (Tm) at each pressure condition was determined by averaging the temperatures measured during the second temperature plateau (Supplementary Table 1). Pressures were estimated from the Raman shift of the diamond anvil culet40 at room temperature after heating. For the run conducted at 9 GPa, the pressure was determined by the ruby fluorescence method41.
The micro-texture analyses were made on quenched samples at Ehime University. After complete pressure release, the sample was recovered from the DAC and embedded in an epoxy resin. The cross-sections of the recovered sample were prepared by Ar ion milling using a cross section polisher (CP; JEOL, IB-19510CP). Field-emission scanning electron microscope (FE-SEM; JEOL, JSM-7000F) was used for micro-structure analysis. The size and shape of individual MgO crystals were examined by electron channelling contrast imaging at an accelerating voltage of 5 kV and a beam current of 3 nA using a back-scattered electron detector. After SEM observation, TEM cross-section foils of ca. 10 × 5 μm × 0.1–0.2 μm thick were cut out from the target areas using a focused ion beam (FIB; JEOL, JEM-9310FIB) system. TEM (transmission electron microscope) and analytical scanning-TEM (STEM) observations were performed at an accelerating voltage of 200 kV using a field-emission TEM (JEOL, JEM-2100F) equipped with high sensitive CCD cameras (Gatan, Orius 200D and UltraScan 1000XP) and a silicon drift detector (JEOL, JED-2300). Scanning-TEM (STEM)-EDS elemental mapping analysis was performed on a 8 × 8 μm2 area of some cross-section foils using a spot size of 0.5 nm.
Estimation of thermal pressure
Since the temperature range of our interest is so high that we cannot rule out the thermal pressure effect, we adopted the Mie–Grüneisen equation42 to estimate the contribution of thermal pressure (Pth).
where γ is the Grüneisen parameter, V is the volume, Eth is the thermal energy and Eth 300 is the thermal energy at 300 K. On the basis of the Debye model, the Eth at a given temperature can be expressed as
where R is the gas constant, n is the number of atoms in the formula unit of the concerned material (n=2 for MgO), T is the temperature and ΘD is the Debye temperature. Since the temperature range used in this study is much higher than the Debye temperature of MgO (ΘD=936 K), we can take the high temperature Dulong and Petit limit for Eth by following43. The Pth is finally expressed as
We used the Grüneisen parameter constrained by the equation of state (EOS) data obtained by both static and dynamic experiments32. Substituting the thermal EOS data, which were obtained by laser-heated diamond anvil cell experiments using a CO2 laser by Fiquet et al.44, into equation (4), we obtained the Pth as a function of the temperature (Supplementary Fig. 4). By linearly fitting the obtained Pths, the Pth can be approximately expressed as
The pressure range studied by Fiquet et al.44 is from 3.2 to 15.7 GPa, which is comparable to that of our study (8.7–36.3 GPa). We used the above equation (5) to estimate the Pths of our Tms, and the results are shown in Supplementary Table 1.
Melting curve of MgO
The MgO melting curve was determined by fitting the Tms obtained in this study to the Simon equation:
where T0 is the melting temperature at zero pressure, Pm is the pressure at melting, and the coefficients A and C are constants30. We obtained A=11.1 (4.0) and C=2.7 (0.5) by using a reported T0 value of 3,098±42 K (ref. 27). The melting extrapolated to 135 GPa is 7,900 K with an uncertainty of the order of a thousand K. The estimated melting curve is in very good agreement with that estimated based on the Linderman’s relation using an experimentally constrained Grüneisen parameter32 (Fig. 4), which was also used for the thermal pressure estimation in this study.
No data sets were generated or analysed during the current study, but the original data in this article are available from the corresponding author on reasonable request.
How to cite this article: Kimura, T. et al. Melting temperatures of MgO under high pressure by micro-texture analysis. Nat. Commun. 8, 15735 doi: 10.1038/ncomms15735 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Labrosse, S., Hernlund, J. W. & Coltice, N. A crystallizing dense magma ocean at the base of the Earth’s mantle. Nature 450, 866–869 (2007).
Ito, E., Kubo, A., Katsura, T. & Walter, M. J. Melting experiments of mantle materials under lower mantle conditions with implications for magma ocean differentiation. Phys. Earth Planet. Inter. 143–144, 397–406 (2004).
Liebske, C. & Frost, D. J. Melting phase relations in the MgO-MgSiO3 system between 16 and 26 GPa: implications for melting in Earth’s deep interior. Earth Planet. Sci. Lett. 345, 159–170 (2012).
Yamazaki, D. et al. Over 1 Mbar generation in the Kawai-type multianvil apparatus and its application to compression of (Mg0.92Fe0.08)SiO3 perovskite and stishovite. Phys. Earth Planet. Inter. 228, 262–267 (2014).
Zerr, A. & Boehler, R. Melting of (Mg,Fe)SiO3-perovskite to 625 kilobars: indication of a high melting temperature in the lower mantle. Science 262, 553–555 (1993).
Zerr, A. & Boehler, R. Constraints on the melting temperature of the lower mantle from high-pressure experiments on MgO and magnesiowüstite. Nature 371, 506–508 (1994).
Fiquet, G. et al. Melting of peridotite to 140 gigapascals. Science 329, 1516–1518 (2010).
Nomura., et al. Low core-mantle boundary temperature inferred from the solidus of pyrolite. Science 343, 522–525 (2014).
Tateno, S., Hirose, K. & Ohishi, Y. Melting experiments on peridotite to lowermost mantle conditions. J. Geophys. Res. 119, 4684–4694 (2014).
Holland, K. G. & Ahrens, T. J. Melting of (Mg, Fe)2SiO4 at the core-mantle boundary of the Earth. Science 275, 1623–1625 (1997).
Akins, J. A., Luo, S., Asimow, P. D. & Ahrens, T. J. Shock-induced melting of MgSiO3 perovskite and implications for melts in Earth’s lowermost mantle. Geophys. Res. Lett. 31, L14612 (2004).
McWilliams, R. S. et al. Phase transformations and metallization of magnesium oxide at high pressure and temperature. Science 338, 1330–1333 (2012).
Belonoshko, A. B. & Dubrovinsky, L. S. Molecular and lattice dynamics study of the MgO-SiO2 system using a transferable interatomic potential. Geochim. Cosmochim. Acta 60, 1645–1656 (1996).
Alfe, D. Melting curve of MgO from first-principles simulations. Phys. Rev. Lett. 94, 235701 (2005).
de Koker, N. & Stixrude, L. Self-consistent thermodynamic description of silicate liquids, with application to shock melting of MgO periclase and MgSiO3 perovskite. Geophys. J. Int. 178, 162–179 (2009).
Belonoshko, A. B. et al. High-pressure melting of MgSiO3 . Phys. Rev. Lett. 94, 195701 (2005).
Stixrude, L. & Karki, B. B. Structure and freezing of MgSiO3 liquid in Earth’s lower mantle. Science 310, 297–299 (2005).
de Koker, N., Karki, B. B. & Stixrude, L. Thermodynamics of the MgO-SiO2 liquid system in Earth’s lowermost mantle from first principles. Earth Planet. Sci. Lett. 361, 58–63 (2013).
Ohtani, E. Melting relations and the equation of state of magmas at high pressure: application to geodynamics. Chem. Geol. 265, 279–288 (2009).
Zhang, L. & Fei, Y. Melting behavior of (Mg,Fe)O solid solutions at high pressure. Geophys. Res. Lett. 35, L13302 (2008).
Du, Z. & Lee, K. K. M. High-pressure melting of MgO from (Mg,Fe)O solid solutions. Geophys. Res. Lett. 41, 8061–8066 (2014).
Yamazaki, D. & Karato, S. Some mineral physics constraints on the rheology and geothermal structure of Earth’s lower mantle. Am. Miner. 86, 385–391 (2001).
Yamazaki, D., Yoshino, T. & Nakakuki, T. Interconnection of ferro-periclase controls subducted slab morphology at the top of the lower mantle. Earth Planet. Sci. Lett. 403, 352–357 (2014).
Errandonea, D. et al. Systematics of transition-metal melting. Phys. Rev. B 63, 132104 (2001).
Errandonea, D., Somayazulu, M., Hausermann, D. & Mao, H. K. Melting of tantalum at high pressure determined by angle dispersive x-ray diffraction in a double-sided laser-heated diamond-anvil cell. J. Phys. Condens. Matter 15, 7635–7649 (2003).
Kimura, T., Kuwayama, Y. & Yagi, T. Melting temperatures of H2O up to 72 GPa measured in a diamond anvil cell using CO2 laser heating technique. J. Chem. Phys. 140, 074501 (2014).
Dubrovinsky, L. S. & Saxena, S. K. Thermal expansion of periclase (MgO) and tungsten (W) to melting temperatures. Phys. Chem. Miner. 24, 547–550 (1997).
Belonoshko, A. & Dubrovinsky, L. S. A simulation study of induced failure and recrystallization of a perfect MgO crystal under non-hydrostatic compression: application to melting in the diamond-anvil cell. Am. Miner. 82, 441–451 (1997).
Kurz, W. & Fisher, D. J. Fundamentals of Solidification Trans Tech Publications (1986).
Simon, F. & Glatzel, G. Bemerkungen zur Schmelzdruckkurve. Z. Anorg. Allg. Chem. 178, 309–316 (1929).
Ohtani, E. Melting temperature distribution and fractionation in the lower mantle. Phys. Earth Planet. Inter. 33, 12–25 (1983).
Speziale, S., Zha, C. S., Duffy, T. S., Hemley, R. J. & Mao, H. K. Quasi-hydrostatic compression of magnesium oxide to 52 GPa: implications for the pressure-volume-temperature equation of state. J. Geophys. Res. 106, 515–528 (2001).
Boehler, R. High-pressure experiments and the phase diagram of lower mantle and core materials. Rev. Geophys. 38, 221–245 (2000).
Funamori, N. & Sato, T. Density contrast between silicate melts and crystals in the deep mantle: an integrated view based on static-compression data. Earth Planet. Sci. Lett. 295, 435–440 (2010).
Widiyantoro, S., Gorbatov, A., Kennett, B. L. N. & Fukao, Y. Improving global shear wave traveltime tomography using three-dimensional ray tracing and iterative inversion. Geophys. J. Int. 141, 747–758 (2000).
Fukao, Y. & Obayashi, M. Subducted slabs stagnant above, penetrating through, and trapped below the 660 km discontinuity. J. Geophys. Res. 118, 5920–5938 (2013).
Zhang, X. L., Cai, L. C., Chen, J., Xu, J. A. & Jing, F. Q. Melting behaviour of Mo by shock wave experiment. Chin. Phys. Lett. 25, 2969–2972 (2008).
Belonoshko, A. B. et al. Molybdenum at high pressure and temperature: melting from another solid phase. Phys. Rev. Lett. 100, 135701 (2008).
Wu, C. J., Soderlind, P., Glosli, J. N. & Klepeis, J. E. Shear-induced anisotropic plastic flow from body-centred-cubic tantalum before melting. Nat. Mater. 8, 223–228 (2009).
Akahama, Y. & Kawamura, H. High-pressure Raman spectroscopy of diamond anvils to 250 GPa: method for pressure determination in the multimegabar pressure range. J. Appl. Phys. 96, 3748 (2004).
Mao, H. K., Bell, P. M., Shaner, J. W. & Steinberg, D. J. Specific volume measurements of Cu, Mo, Pd, and Ag and calibration of the ruby R 1 fluorescence pressure gauge from 0.06 to 1 Mbar. J. Appl. Phys. 49, 3276 (1978).
Grüneisen, E. The State of a Solid Body Natl. Aeronautics Space Admin. (1959).
Martinez, I. et al. Shock recovery experiments on dolomite and thermodynamical calculations of impact-induced decarbonation. J. Geophys. Res. 100, 15465–15476 (1995).
Fiquet, G., Andrault, D., Itie, J. P., Gillet, P. & Richet, P. X-ray diffraction of periclase in a laser-heated diamond-anvil cell. Phys. Earth Planet. Inter. 95, 1–17 (1996).
We thank Y. Kuwayama and S. Ohnishi for their assistance in the high-pressure experiments. Discussions with T. Sakai, T. Ohuchi, T. Yagi, Z. Du and T. Taniushi were helpful. This work is funded by the JSPS Grant-in-Aid for Scientific Research (Nos JP25220712, JP24740356, JP16K05612, and JP16J00612). This work was supported by the Joint Usage/Research Center PRIUS, Ehime University. This work was partly supported by the joint research project (No 2014B2-34) of the Institute of Laser Engineering, Osaka University.
The authors declare no competing financial interests.
About this article
Cite this article
Kimura, T., Ohfuji, H., Nishi, M. et al. Melting temperatures of MgO under high pressure by micro-texture analysis. Nat Commun 8, 15735 (2017). https://doi.org/10.1038/ncomms15735
Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperature
Communications Materials (2020)
Review of Scientific Instruments (2020)
A Joint Experimental‐Modeling Investigation of the Effect of Light Elements on Dynamos in Small Planets and Moons
Journal of Geophysical Research: Planets (2020)
On the Timescale of Magma Ocean Solidification and Its Chemical Consequences: 1. Thermodynamic Database for Liquid at High Pressures
Journal of Geophysical Research: Solid Earth (2019)
Journal of the Physical Society of Japan (2019)