Resolving the timing of crustal processes and meteorite impact events is central to understanding the formation, evolution and habitability of planetary bodies. However, identifying multi-stage events from complex planetary materials is highly challenging at the length scales of current isotopic techniques. Here we show that accurate U-Pb isotopic analysis of nanoscale domains of baddeleyite can be achieved by atom probe tomography. Within individual crystals of highly shocked baddeleyite from the Sudbury impact structure, three discrete nanostructural domains have been isolated yielding average 206Pb/238U ages of 2,436±94 Ma (protolith crystallization) from homogenous-Fe domains, 1,852±45 Ma (impact) from clustered-Fe domains and 1,412±56 Ma (tectonic metamorphism) from planar and subgrain boundary structures. Baddeleyite is a common phase in terrestrial, Martian, Lunar and asteroidal materials, meaning this atomic-scale approach holds great potential in establishing a more accurate chronology of the formation and evolution of planetary crusts.
Isotopic heterogeneities within meteorite samples caused by shock metamorphism1,2,3 complicate efforts to characterize and date these precious materials. This has resulted in conundrums regarding the timing of major planetary events, including the timing of lunar magma ocean crystallization4, Martian volcanism1,2 and impact bombardment of the inner Solar System5,6. Recently, the coupling of isotopic geochronology with microstructural analysis of robust accessory phases has greatly enhanced our ability to date highly shocked samples by crystallographically contextualizing micrometre-scale geochemical analyses. In zircon (ZrSiO4), crystallographically deformed grains have been targeted in efforts to ascertain impact ages7, whereas more pristine igneous grains are selected to establish timing of primary crystallization1,2. However, the occurrence of zircon within the Solar System is mostly restricted to high silica (granitoid) magmas, mafic differentiates, and highly metamorphosed meteorites8. Baddeleyite (monoclinic-ZrO2) is much more widely occurring, reported from a wide range of terrestrial mafic and ultra-mafic rock types9 and within Lunar10,11, Martian1, chondritic12 and asteroidal (HED13) meteorites. Grains are often small (<20 μm), but develop a range of characteristic microstructures under shock-loading conditions which allow for contextualized dating of target grains2. Although challenging to separate from whole rock aggregates14, recent advances of in-situ U-Pb isotope analysis have enabled the dating of this phase using volumes as small as 5 × 5 × 1 μm (secondary ion mass spectrometry15). However, given that shock microstructures in baddeleyite vary at the micrometre to sub-micrometre scale1,2, such techniques still homogenize microstructural domains, yielding an array of partially reset ages within highly shocked populations2. Here we use atom probe tomography (APT) to accurately resolve chronological end-members (that is, protolith crystallization and impact metamorphism) within highly shocked baddeleyite of the Matachewan dyke swarm16 (Ontario, Canada). This approach has the unique potential to produce coupled isotopic and structural data sets from nanoscale domains17, facilitating direct U-Pb dating of nanometre-scale features.
APT of unshocked baddeleyite
Although atom-probe analysis of Pb isotope ratios (207Pb/206Pb) has previously been conducted on zircon17, this study represents the first effort to analyse baddeleyite on the atomic scale. In this regard, reference ZrO2 grains of the Phalaborwa carbonatite complex, South Africa18 have been analysed under the same conditions as the unknown grain population. Spectral analysis identified the most abundant U-bearing compound as the species 238U16O22+ at 135 Da (mass-to-charge ratio in daltons), although smaller peaks were observed at 270 Da (238U16O2+), 84.66 Da (238U16O3+) and 127 Da (238U16O2+). Pb isotopes 206Pb, 207Pb and 208Pb in the 2+ charge state was ranged and quantified at 103, 103.5 and 104 Da respectively, although counts of 207Pb and 208Pb are below detection limits. This comprehensive analysis of U and Pb isotope systematics is facilitated by the absence of Si within the baddeleyite lattice, limiting a large portion of the isobaric interferences that prevent accurate U measurements in zircon19. Despite being a mineralogical U-Pb reference material18, Phalaborwa baddeleyite displays micrometre-scale uranium variability, including low- and high-U domains and localized zonation20. Sampling a low-U domain yielded a below-average concentration of U and Pb for this specimen, minimizing counts and resulting in isotopic ratios with large analytical uncertainties. Despite this, the standard microtip yielded a 206Pb/238U ratio of 0.48±0.09, within uncertainty of small-volume laser ablation analysis20. All elements, including known minor and trace elements that are incompatible in the ZrO2 lattice (such as Ti and Fe) are homogeneously distributed throughout both annealed (400 °C for 1 h) and unannealed microtips (Supplementary Fig. 1). These observations provide a first-order insight into unshocked baddeleyite nanostructure, where heating alone does not encourage a redistribution of incompatible cations.
APT of shocked baddeleyite
The studied thin section (JD12SUD14) is from a highly shocked diabase dyke sampled ∼500 m beneath the lower northern contact of the Sudbury impact melt sheet. The sample is uniquely well-characterized, with high precision thermal ionization mass spectrometry constraints on the timings of crystallization (2,473±16 Ma (ref. 16)) and impact shock metamorphism (1,850±1 Ma (ref. 21)), as well as petrologically constrained shock (>10 GPa (ref. 22)) and post-shock (>850 °C (ref. 23)) P–T conditions. Baddeleyite is abundant in the sample, with over 100 grains ranging from 15 to 330 μm2 found in the exposed surface area (Supplementary Fig. 2). Field-emission scanning electron microscope (SEM) and electron backscatter diffraction (EBSD) analyses of these grains reveal a range of microstructures, including complex mosaics of interlocking twin domains, partial amorphization and partial granularization (Fig. 1). These structures differ greatly from those observed in unshocked grains where simple and polysynthetic twinning is dominant. Two grains (44,755 and 46,059) were isolated for APT analyses. The two grains yielded a total of 11 statistically significant atom probe data sets comprising between 2.6 and 35 million total background-corrected ions. The specimens are chemically similar, comprising ∼99% Zr and O (bulk compound ZrO2) with a number of impurities in the form of Hf, Nb, Fe and Y. Other elements, including Ti, Si, Ta, P, Yb, U, Ca, Sc, Mn, Al, Mg and Pb are present in very minor quantities (Supplementary Data). 206Pb2+ produces sharp, well-defined peaks totaling between 269 and 4,870 counts in all microtip specimens, and the decomposition of UO and UO2 peaks yielded between 737 and 15,464 total counts of 238U.
206Pb/238U ratios from the bulk tips generate geologically reasonable ages between 2,435 (±1,075) Ma and 1,485 (±313) Ma (Supplementary Table 1), albeit with large internal counting statistics errors. Despite this, the bulk ages highlight a partially-reset population yielding ages between crystallization (2.45 Ga (ref. 16)) and impact (1.85 Ga (ref. 21)), although the youngest age (1,485±313 Ma) fails to reflect either of these chronological end members. Closer inspection of the eleven APT three-dimensional reconstructions reveals three discrete nanostructural domain types, highlighted by variable distribution of incompatible elements (Si, Mg, Al, Yb), most clearly iron (Fig. 2): (1) homogenous-Fe domains in which all elements are homogeneously distributed throughout the regions, appearing nanostructurally identical to annealed and unannealed microtips of the Phalaborwa baddeleyite standard; (2) clustered-Fe domains in which incompatible cations form nanoclusters ∼10 nm in size that can be clearly isolated by a 2% Fe isosurface and are evenly distributed throughout the domain; (3) planar and curvi-planar domains displaying ∼10 nm nanoclusters enriched in all incompatible elements concentrated along their length. The latter features are either curvi-planar (interpreted as subgrain boundaries) or planar (probably associated with dislocation migration) and are often bound by incompatible-depleted regions within adjacent clustered-Fe domains. Five data sets comprise a single domain type (either homogenous-Fe or clustered-Fe), whereas the remaining data sets contain a mixture of the three defined subdomains (Supplementary Fig. 3). In these complex tips, nanostructural subdomains were first identified by Fe distribution before segregation using cuboid regions of interest, allowing separate mass-to-charge spectra to be generated for each region and yielding structurally isolated U-Pb ratios and ages.
This approach uniquely facilitates the generation of isotopic ratios from nanostructurally characterized subgrain domains and hence allows for evaluation of the variability in 206Pb/238U ages within and between regions with differing nanostructural histories (Fig. 3; Supplementary Table 2). Homogenous-Fe regions (two full data sets and two subdomains) yield an average 206Pb/238U age of 2,436±94 Ma (3.9%; 2 s.e.), within uncertainty of the known age of the diabase protolith16. Isolation of the entire clustered-Fe domains (three full data sets and five subdomains) yield an average 206Pb/238U age of 1,852±45 Ma (2.4%), which is within uncertainty of the age for the Sudbury impact event21. Individual Fe-clusters within these domains yield low counts of U and Pb, which fall below the detection limits of APT. Isolation of four planar and curvi-planar features produces an average age of 1,412±56 Ma (4%). This younger age overlaps with the timing of the last significant tectonic event to affect the region, the Chieflakian Orogeny, which resulted in widespread greenschist facies (ca. 350–500 °C, ca. 2–8 kbar) metamorphism across the study area24. Taking weighted averages of these same data sets yields similar ages and uncertainties, but with very low mean squared weighted deviation values (0.028–0.038) that suggest the internal counting statistics errors overestimate the true reproducibility of the measurements.
Partially impact age-reset grain populations have typically been inferred to represent variable grain to micrometre-scale diffusion of radiogenic isotopes during thermal metamorphism of shock-deformed domains25, including for baddeleyite8. However, our findings show that the development of localized nanometre-scale structures controls the mobilization potential of Pb in baddeleyite and results in subdomains that preserve either protolith crystallization or impact-reset 206Pb/238U ages. These nanostructures probably relate to partial formation of the high-pressure orthorhombic-ZrO2 phase during shock loading of the crystal lattice2,26. This is known to be a progressive transition above ∼5 GPa (ref. 26), due to the anisotropic elastic properties of baddeleyite27. Transformed domains would readily revert to the stable monoclinic structure during melt-sheet induced annealing (>850 °C (ref. 23)) immediately following impact28. It is likely to be that nanoscale defects induced by these transformations facilitate the migration of Fe into clusters during heating, while also facilitating the complete diffusion of Pb from the domain. Preserved igneous m-ZrO2 domains would not contain these pathways, preventing Pb and Fe diffusion within the lattice and preserving both the homogenous distribution of atoms and the primary U-Pb age. The planar and curvi-planar features observed appear more susceptible to Pb-diffusion during low temperature and pressure (tectonic) metamorphism, suggesting that these operate independently of the host baddeleyite grain. This observation is in agreement with previous studies, which suggest nanometre-scale planar and linear features undergo continued pipe diffusion of incompatible elements and isotopes below the closure temperature of the crystal29. An important implication of the observed nanostructural and isotopic complexity is that larger analytical volumes15,20 will homogenize these domains and yield a mixed age from multiple isotopic reservoirs, which may not have clear geological significance.
Despite exposure to high-pressure shock metamorphism (>10 GPa (ref. 22)) and high-temperature post-shock annealing (>850 °C (ref. 23)), nanometre-scale domains in our sample preserve ages for both protolith crystallization (2,436±45 Ma) and impact metamorphism (1,852±145 Ma), suggesting that such data can be extracted from even the most highly shocked and annealed grain populations. The ability to generate targeted, high precision U-Pb ages with APT yields great promise when examining the tiny (<3 μm) baddeleyite grains which are reported within many planetary materials1,2,10,11,12. Going further, the ability to identify and sub-sample discreet nanostructural subdomains (for example, homogenous-Fe versus clustered-Fe) for isotopic analysis opens new avenues for dating highly deformed materials, including meteoritic samples. This allows for the unambiguous resolution of crystallization and impact ages in highly shocked planetary samples, presenting an exceptional opportunity to constrain timings for major Solar System events.
Grain location and imaging using SEM
Baddeleyite grains were located in situ within a single thin section of JD12SUD14 using an automated feature scan of the section coupling a Hitachi SU6600 field emission gun—SEM with an Oxford X-Max energy-dispersive spectroscopy detector housed within the Zircon and Accessory Phase Laboratory (ZAPlab) at the University of Western Ontario, Canada. EBSD analyses were conducted using an Oxford HKL Nordlys detector with step sizes of 150–250 nm (grain size dependant) closely following previously reported instrument conditions8. The only post-analysis noise reduction processing performed was to replace ‘wild spikes’ (interpreted as isolated, erroneously indexed pixels) with a zero solution.
U-Pb analysis of baddeleyite using APT
While EBSD analyses were ongoing two additional grains were isolated for APT. Microtip specimens were prepared using either an FEI Helios or Nova focused ion beam-SEM using standard lift-out and mount techniques to produce the desired specimen shape30,31,32. A series of annular mills with a decreasing inner radius were used to produce needle-shaped specimens with a radius of curvature of <100 nm. A total of 14 microtip specimens were created from four ∼2 × 10 μm pullouts derived from grains 44755 and 46059. In this work, the prepared specimens were analysed with a LEAP 5000 XR atom probe housed at the CAMECA Atom Probe Technology Center, Madison, Wisconsin. During acquisition, the specimen is placed under a high electric field, and evaporation and ionization of atoms from the surface occur commensurate with a laser pulse (125 kHz, 100 pJ). The mass-to-charge ratio of the ions is determined through time-of-flight mass spectrometry. Ion flight paths (382 mm) are terminated on a position-sensitive detector and the spatial information is reconstructed by projecting the ions back to the spherical end-form of the specimen and considering the sequential order of evaporation. Full details of local electrode atom probe data acquisition are provided elsewhere23,33,34.
Of the 14 tips, 3 failed early (<100 nm run length), yielding statistically irrelevant data sets. The remaining 11 tips yielded between 2.3 × 106 and 3.5 × 107 background corrected, spectrally ranged ions over the length of the analysis. Tips ran smoothly, starting evaporation between 3 and 5 kV, and finishing between 8 and 12 kV. The exact beginning and end points depend primarily on the specimen size and shape after focused ion beam milling, and whether the experiment was turned off or was stopped by fracturing of the specimen. Background counts are similar between tips, representing between 10% and 22% of the total (uncorrected) atomic counts. Thermal tails are present, but are generally only visible approximately one to three orders of magnitude down from peak height and so are only visible on the most prominent peaks, which have a large signal (Supplementary Fig. 4).
Nanostructural domains were defined visually based on the distribution of Fe within the reconstructed three-dimensional volume. Subdivision of domains yielded a total of 7.6 × 107 corrected, ranged ions within 8 Clustered-Fe domains, a total of 5.2 × 107 ions within four Homogenous-Fe domains and 2.5 × 107 ions within 4 planar and curvi-planar features. 206Pb++ was measured at 103 Da. U-bearing compound peaks as 135 Da (238U16O22+), 270 Da (238U16O2+), 84.66 Da (238U16O3+) and 127 Da (238U16O2+) were decomposed to yield total 238U counts for all data sets. For each individual peak, corrected ionic counts were calculated through the subtraction of background counts from the total (raw) ionic count. Peak location varied very subtly (<0.1 Da) between spectra and, as such, the exact mass/charge location of ranged peaks varies accordingly. In all scenarios, U and Pb peaks were ranged by eye from baseline to baseline, to ensure a reproducible count between microtip spectra. Propagation of absolute raw and background counting statistics errors (✓counts) allows for estimated uncertainty on the background-corrected peak using equation (1).
This yields the final error on 206Pb measurement, as it is derived from a single peak. As 238U represents the combination of UO and UO2 peaks, a further step must be taken (equation (2)).
Once individual error for 206Pb and 238U have been calculated, isotopic errors can be extrapolated in quadrature to yield an estimated error for the final 206Pb/238U ratio (and hence age) using equation (3).
Average ages for all subdivided nanostructural domains were calculated by taking the mean 206Pb/238U age of each tip and/or characterized domain. Presented error bars for average ages (Fig. 3) represent 2 s.d. of the mean and include decay constant uncertainties. Mean standard working deviation values were calculated by taking a weighted average of the age population using isoplot35.
The authors declare that the data supporting the findings of this study are available within the paper (and its Supplementary Information files).
How to cite this article: White, L. F. et al. Atomic-scale age resolution of planetary events. Nat. Commun. 8, 15597 doi: 10.1038/ncomms15597 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Moser, D. E. et al. Solving the Martian meteorite age conundrum using micro-baddeleyite and launch-generated zircon. Nature 499, 454–457 (2013).
Darling, J. R. et al. Variable microstructural response of baddeleyite to shock metamorphism in young basaltic shergottite NWA 5298 and improved U–Pb dating of Solar System events. Earth Planet. Sci. Lett. 444, 1–12 (2016).
Nyquist, L. E. et al. Ages and geologic histories of Martian meteorites. Space Sci. Rev. 96, 105–164 (2001).
Borg, L. E., Connelly, J. N., Boyet, M. & Carlson, R. W. Chronological evidence that the Moon is either young or did not have a global magma ocean. Nature 477, 70–72 (2011).
Abramov, O. & Mojzsis, S. J. Microbial habitability of the Hadean Earth during the late heavy bombardment. Nature 459, 419–422 (2009).
Kring, D. A. & Cohen, B. Cataclysmic bombardment throughout the inner solar system 3.9–4.0 Ga. J. Geophys. Res. 107, 5009 (2002).
Cavosie, A. J. et al. A terrestrial perspective on using ex situ shocked zircons to date lunar impacts. Geology 43, 999–1002 (2015).
Haba, M. K., Yamaguchi, A., Horie, K. & Hidaka, H. Major and trace elements of zircons from basaltic eucrites: Implications for the formation of zircons on the eucrite parent body. Earth Planet. Sci. Lett. 387, 10–21 (2014).
Heaman, L. M. & LeCheminant, A. N. Paragenesis and U-Pb systematics of baddeleyite (Zr02). Chem. Geol. 110, 95–126 (1993).
El Goresy, A., Ramdohr, P. & Taylor, L. A. The geochemistry of the opaque minerals in Apollo 14 crystalline rocks. Earth Planet. Sci. Lett. 13, 121–129 (1971).
Arai, T. et al. Support for a prolonged KREEP magmatism: U-Pb age dating of zircon and baddeleyie in Lunar meteorite NWA 4485. Lunar Planet. Sci. Conf. 6, 34801 (2010).
Krot, A. N., Rubin, A. E. & Kononkova, N. N. First occurrence of pyrophanite (MnTi03) and baddeleyite (ZrO2) in an ordinary chondrite. Meteoritics 28, 232–239 (1993).
Hsu, W., Wang, L. & Zhang, A. in 76th Annual Meteoritical Society Meeting (2013) Vol. 212, 5015 (Edmonton, Canada, 2013).
Soderlund, U. & Johansson, L. A simple way to extract baddeleyite (ZrO2). Geochem. Geophys. Geosyst. 3, 1014 (2002).
Chamberlain, K. R. et al. In situ U-Pb SIMS (IN-SIMS) micro-baddeleyite dating of mafic rocks: method with examples. Precambrian Res. 183, 379–387 (2010).
Heaman, L. M. Global mafic volcanism at 2.4 Ga: remnants of an ancient large igneous province? Geology 25, 299–302 (1997).
Valley, J. W. et al. Hadean age for a post-magma-ocean zircon confirmed by atom-probe tomography. Nat. Geosci. 7, 219–223 (2014).
Heaman, L. M. The application of U-Pb geochronology to mafic, ultramafic and alkaline rocks: an evaluation of three mineral standards. Chem. Geol. 261, 42–51 (2009).
Valley, J. W. et al. Presidential address. Nano-and micro-geochronology in Hadean and Archean zircons by atom-probe tomography and SIMS: New tools for old minerals. Am. Mineral. 100, 1355–1377 (2015).
Ibanez-Mejia, M. et al. Small-volume baddeleyite (ZrO2) U-Pb geochronology and Lu-Hf isotope geochemistry by LA-ICP-MS. Techniques and applications. Chem. Geol. 384, 149–167 (2014).
Krogh, T. E., Davis, D. W. & Corfu, F. in The Geology and Ore Development of the Sudbury Structure, Ontario (eds Pyr, E. G., Naldrett, A. J. & Giblin, P. E.) 431–447 (Ontario Geological Survey, 1984).
Grieve, R. F., Reimold, W. U., Morgan, J. V., Riller, U. & Pilkington, M. Observations and interpretations at Vredefort, Sudbury, and Chicxulub; towards an empirical model of terrestrial impact basin formation. Meteorit. Planet. Sci. 43, 855–882 (2008).
James, R. S., Sweeny, J. M. & Peredery, W. V. Thermobarometry of the Levack gneisses - footwall rocks to the Sudbury Igneous Complex (SIC). Lithoprobe Rep. 25, 179–182 (1992).
Corfu, F. & Easton, R. M. U-Pb evidence for polymetamorphic history of Huronian rocks within the Grenville front tectonic zone east of Sudbury, Ontario, Canada. Chem. Geol. 172, 149–171 (2001).
Gaffney, A. M., Borg, L. E., Asmerom, Y., Shearer, C. K. & Burger, P. V. Disturbance of isotope systematics during experimental shock and thermal metamorphism of a lunar basalt with implications for Martian meteorite chronology. Meteorit. Planet. Sci. 46, 35–52 (2011).
Kudoh, Y., Takeda, H. & Arashi, H. In situ determination of crystal structure for high pressure phase of ZrO2 using a diamond anvil and single crystal X-ray diffraction method. Phys. Chem. Miner. 13, 233–237 (1986).
Ingel, R. P. & Lewis, D. elastic anisotropy in zirconia single crystals. J. Am. Ceram. Soc. 71, 265–271 (1988).
McCullough, J. D. & Trueblood, K. N. The crystal structure of baddeleyite (monoclinic ZrO2). Acta Crystallogr. 12, 507–511 (1959).
Piazolo, S. et al. Deformation-induced trace element redistribution in zircon revealed using atom probe tomography. Nat. Commun. 7, 10490 (2016).
Miller, M. K. & Russell, K. F. Atom probe specimen preparation with a dual beam SEM/FIB Miller. Ultramicroscopy 107, 761–766 (2007).
Miller, M. K., Russell, K. F., Thompson, K., Alvis, R. & Larson, D. J. Review of atom probe fib-based specimen preparation methods. Microsc. Microanal. 13, 428–436 (2007).
Thompson, K. et al. In-situ site-specific specimen preparation for atom probe tomography. Ultramicroscopy 107, 131–139 (2007).
Larson, D. J., Prosa, T. J., Ulfig, R. M., Geiser, B. P. & Kelly, T. F. Local Electrode Atom Probe Tomography: A User’s Guide Springer (2013).
Kelly, T. F. & Larson, D. J. Atom probe tomography. Annu. Rev. Mater. Res. 42, 1–31 (2012).
Ludwig, K. R. User’s manual for Isoplot/Ex rev. 2.49: A Geochronological Toolkit for Microsoft Excel. (Berkeley Geochronology Centre, 2001).
We gratefully acknowledge the support of CAMECA in conducting APT analyses. This project was supported by Royal Society Research Grant RG160237, the Elspeth Matthews Fund of the Geological Society of London and a University of Portsmouth RDF Grant to J.R.D., and Canadian NSERC Discovery Grants to D.M. We thank I. Barker for his expert assistance with SEM analyses, Vale and Xstrata for assistance with fieldwork and two anonymous reviewers whose insights helped to improve this manuscript.
The authors declare no competing financial interests.
Supplementary Figures and Supplementary Tables (PDF 4967 kb)
Tabular overview of run conditions, total uncorrected ionic counts and compositional data for all eleven microtip specimen discussed in the manuscript. (XLSX 65 kb)
Three-dimensional rotating image of Fe measured by APT in microtip specimen R60_146506. The tip contains evidence of all three nanostructural domains observed throughout the sample set (clustered-Fe, homogenous-Fe, and planar). The tip clearly displays the subgrain nature of the domains, with clustered and homogenous domains segregated by a curvi-planar boundary. The video was generated through the 360° rotation of the tip about the z-axis. (MOV 10161 kb)
About this article
Micro- and nano-scale textural and compositional zonation in plagioclase at the Black Mountain porphyry Cu deposit: Implications for magmatic processes
American Mineralogist (2019)
Geoscience Frontiers (2019)
Microscopy and Microanalysis (2019)
Crystallization and impact history of a meteoritic sample of early lunar crust (NWA 3163) refined by atom probe geochronology
Geoscience Frontiers (2019)
Nanoscale resetting of the Th/Pb system in an isotopically-closed monazite grain: A combined atom probe and transmission electron microscopy study
Geoscience Frontiers (2019)