One-dimensional conductive particle assembly holds promise for a variety of practical applications, in particular for a new generation of electronic devices. However, synthesis of such chains with programmable shapes outside a liquid environment has proven difficult. Here we report a route to simply ‘pull’ flexible granular and colloidal chains out of a dispersion by combining field-directed assembly and capillary effects. These chains are automatically stabilized by liquid bridges formed between adjacent particles, without the need for continuous energy input or special particle functionalization. They can further be deposited onto any surface and form desired conductive patterns, potentially applicable to the manufacturing of simple electronic circuits. Various aspects of our route, including the role of particle size and the voltages needed, are studied in detail. Looking towards practical applications, we also present the possibility of two-dimensional writing, rapid solidification of chains and methods to scale up chain production.
Fabrication of one-dimensional (1D) granular and colloidal materials is of considerable interest, as they offer opportunities for a variety of electronic applications, including granular conductors1, flexible electronics for wearable devices2 and electromagnetic energy transport3,4. These 1D patterns can be assembled either from particle groups5,6,7,8 or from individual particles9,10,11,12,13. The latter can also be employed in mechanical contexts, for example, as flexible artificial flagella or cilia14,15,16. Compared to other methodologies such as lithography2,17, cluster-assisted assembly18 and colloidal polymerization19, field-directed assembly in electro- or magneto-rheological fluids20,21 provides a simple, efficient22 and controllable approach for particle chain formation. However, it suffers from two major limitations that hinder its application, for example, in electronic-device manufacturing. First, the assembly typically takes place in bulk liquid, which limits the control over positioning of the chains. Second, maintaining the formed structures normally requires a continuous energy supply; once the external field is turned off, the structures disintegrate. Avoidance of this limitation requires special functionalization of the particle surfaces, such as grafting of DNA23,24,25 or polymeric crosslinkers22,26,27 and designing charge groups10.
Here we propose a route to overcome both of these limitations, making it possible to easily fabricate self-sustained, printable granular and colloidal chains outside of a dispersion. The central idea is to combine field-directed assembly with capillary effects, as illustrated in Fig. 1. Conductive particles of radius a are initially dispersed in a leaky dielectric liquid that only gives rise to weak screening effects, for example, natural or synthetic oil. To initiate chain formation, we bring a needle-shaped electrode to the liquid surface, and apply an electric field through it. The external field polarizes nearby conductive particles. Through dielectrophoresis (DEP), these conductive particles are attracted along the field gradient, that is, towards the tip of the electrode. When the electrode rises, it pulls the particles out of the liquid to form a particle chain. Along the chain, any two adjacent particles are connected by a sphere–sphere liquid bridge. Interestingly, the combined capillary effects of these bridges make it possible to maintain a stable particle chain even after the external field is turned off.
The viability of this approach can be estimated from direct force calculations. Stability of the particle chain in the absence of an external electric field requires the capillary force Fss≈2πγa (γ the surface tension of the liquid) to exceed the gravitational force acting on an entire chain Fg=4πNρga3/3 (N the number of particles, ρ the particle density and g the gravitational acceleration). For the shortest chain (two particles) an upper limit to the particle size is amax=(3γ/2ρg)1/2. Given γoil∼0.01 N m–1, ρ∼1 g cm–3 and g∼10 m s–2, we estimate amax∼1 mm. For particles with radii up to several microns, their weight is negligible, as Fg=(a/amax)2Fss≤10−4 Fss, and thus a long chain composed of hundreds or thousands of particles is stable in the absence of an electric field.
To achieve a chain formation by sequentially pulling each individual micron-sized particle out of the liquid, the only requirement is that the DEP force Fe exerted on it must overcome the downward capillary force Fsp, such that the sphere–plane liquid bridge can be extended and broken. The sphere directly above it is connected to the electrode and stays at voltage U with respect to the grounded container. Thus, it carries a charge Q=4πɛoilɛοaU (ɛoil the relative permittivity of the medium and ɛο the vacuum permittivity) and thus generates a radially decaying electric field E=Q/(4πɛoilɛοr2)=aU/r2. Given the conventional formula28 for the DEP force Fe=2πɛoilɛοa3κ∇(E2), its action on the sphere beneath it is Fe=8πɛoilɛοa5κU2/d5, where d is the centre-to-centre distance between the two spheres, and κ the Clausius–Mossotti factor, which approaches unity for highly conductive particles. In the limit that the two spheres are at contact, d→2a, we obtain Fe=πɛoilɛοκU2/4. Thus, the applied voltage U should be at least Umin=(4Fsp/πɛoilɛοκ)1/2=(8γa/ɛoilɛοκ)1/2. Given that κ∼1 and ɛoil∼1, the minimum voltage required for a particle of radius a∼10 μm to be removed from the bulk liquid interface is on the order of hundreds of volts.
To realize this approach in experiment, we employ a dispersion of silver-coated hollow silica microspheres (a∼30 μm, ρ∼0.17 g cm–3) in silicone oil (viscosity η=100 mPa s, mass density ρoil∼0.96 g cm–3, surface tension γ∼0.03 N m–1). After dipping the electrode into the dispersion, we apply an electric voltage of magnitude U=600 V between the electrode and the bottom of the container. To eliminate any unwanted DC effects, such as contact charge electrophoresis29, we employ a high-frequency AC field (f=20 kHz, square wave). The electrode is elevated at an average speed of around 1 mm s–1. As illustrated in Fig. 2, in less than a minute, a nearly 3-cm-long chain comprised of around 500 particles is easily formed and stays in place even after the field is turned off.
Moreover, as illustrated in Fig. 3a–f, our approach works for a wide range of particle diameters, spanning from 100 nm to 200 μm. Note that the structure shown in Fig. 3a is a chain of nanoparticle aggregates rather than individual particles, with a thickness of about 1 μm.
Requirements on the applied field
Since this experimental realization confirms the viability of the concept, we further explore the underlying mechanism. Notably, we find that voltages significantly lower than the predicted threshold are sufficient. For example, for spheres of radius 30 μm, the observed threshold is ∼100 V, far lower than Umin=570 V (the value obtained using the conventional DEP model). This can be understood from a significant underestimation of the force Fe in the conventional DEP model when d→2a, which arises from omission of the influence of the polarized sphere on the electric field. In reality, when two spheres are nearly touching (surface separation s→0), the electric field is strongly altered, reaching a magnitude of the order of U/s, far exceeding the assumption aU/d2. Consequently, the induced surface charges heavily concentrate at the facing poles of both spheres, rendering the conventional DEP model invalid. To account for this we perform a finite-element analysis (FEA, see Methods), in which we apply a voltage U on one sphere and obtain the DEP force on the other by computing the induced surface charges and directly summing the electrostatic forces exerted on them.
As illustrated in Fig. 4, the electric field generated by the sphere at voltage U is strongly distorted by the nearby polarized sphere. Indeed, at small separations s, the resultant DEP force follows the exact asymptotic solution Fe∝1/[s(ln s)2] (refs 30, 31), exceeding the conventional DEP model by more than an order of magnitude when s<0.1a. This explains the experimental observation that voltages as low as ∼100 V are sufficient.
Another subtle point is that once a conductive sphere touches the electrode, it is charged and subsequently repelled by the electrode via contact-charge electrophoresis (CCEP) (ref. 29). Supplementary Movie 3 demonstrates the standard CCEP oscillation that occurs at low AC frequency, a phenomenon potentially destabilizing the formed chain. This problem can be resolved by utilizing high-frequency AC fields (>100 Hz), which quickly desynchronize the charges on the sphere and the electrode and thus largely suppress CCEP.
The chains formed via this route remain stable even after the external field is turned off, held together by the sphere–sphere liquid bridges, which at the same time render them flexible enough to bend32 (Supplementary Fig. 1). This combination of properties makes it possible to subsequently deposit the formed chains into any targeted patterns via direct writing. As a demonstration, Fig. 5 presents C-shaped, S-shaped and L-shaped pathways. Such two-dimensional (2D) writing offers the potential for designing simple granular electronic circuits on an arbitrary surface without the need for prefunctionalization of the particles.
The chains can also be easily and rapidly solidified to fix their shape. Solidification can be induced through cooling (for example, by employing premelted paraffin wax) or chemical curing (for example, with temperature- or UV-sensitive epoxies). We demonstrate two examples of solidified chains composed of conductive microparticles initially dispersed in liquid resin and in liquid paraffin wax, respectively. The resin, blended with a volatile organosilicon compound (cyclopentasiloxane), hardens as the organosilicon evaporates, which takes several minutes after chain formation. By contrast, the solidification of chains pulled out from paraffin wax preheated to around 80 °C takes only several seconds, the time needed for cooling the liquid paraffin below its melting temperature (65 °C). Figure 6 shows scanning-electron-microscopy images of a chain enveloped by solidified paraffin wax and a chain covered by solidified resin.
One final note on the fabricating process is that the pulling speed cannot be too fast. As illustrated in Fig. 7, a chain becomes unstable in the absence of external fields when it has been pulled out too quickly, tending to kink or curl up. This instability is caused by excess liquid in the sphere–sphere bridge. The amount of liquid (per particle) dragged during pulling typically increases with pulling speed and should not exceed the maximum volume of a sphere–sphere bridge, that is, half the volume of a sphere.
In summary, we have presented a convenient route for fabricating one-dimensional conductive micron-sized structures, combining field-induced assembly and capillary effects. The assembled structure remains stable outside a liquid environment and even without continuous energy supply, making this method different from most conventional approaches. Since the particles are connected through liquid bridges, the chain exhibits a certain flexibility and can be utilized in 2D direct-writing processes. Solidification then permits fixation of the chain in such a designed shape. The entire process takes less than a minute for generating a long chain composed of thousands of particles. We have demonstrated that this approach works for a wide range of particle sizes and can be scaled up (Supplementary Fig. 2).
The experimental set-up consisted of a signal generator (SDG1025 Siglent), a high-voltage bipolar amplifier (10HVA24-BP1 HVP), x–y–z motorized translation stage (MTS25-Z8 Thorlabs), a digital microscope (AM7115 Dino-Lite) and a PC for collecting images. The signal electrode for pulling out the particles from a dispersion was made of a thin aluminium wire attached to another motorized translation stage for controlling the pulling rate.
Silicone oils (Dow Corning 200 with kinematic viscosity ∼100 cSt; electric conductivity <5 pS m–1; relative permittivity ∼2.5), epoxy resin (Dow Corning 749 fluid) and paraffin wax (Sigma-Aldrich ASTM D 87, melting point ∼65 °C) were used to form a dispersion with conductive particles or microspheres.
Conductive silver-coated hollow glass microspheres (M-40-0.67/10–20 μm, M-60–0.17/53–63 μm, specific densities of 0.67 and 0.17 g cm–3, average size 15 and 55 μm, respectively), conductive silver-coated solid-glass microspheres (SLGMS-AG-2.5 86–110 μm, specific density 2.5 g cm–3, average size 100 μm), conductive stainless steel microspheres (SSMMS-7.7 23–28 μm, SSMMS-7.8 95–105 μm, SSMMS-7.8 190–220 μm, SSMMS-7.8 480–520 μm, specific density 7.8 g cm–3, and average size 25, 100 and 200 μm, respectively) were purchased from Cospheric LLC. Magnetic nanoparticles (637106-250G, 50–100 nm) were purchased from Sigma-Aldrich. The nanoparticles were dispersed in silicone oil using ultrasonication. But since they were not stabilized (for example, by surfactants), they formed aggregates with sizes ranging from hundreds of nanometres to a few micrometres. Thus, when pulled out from a dispersion, they formed a chain of particle aggregates rather than a chain of individual particles.
FEA was performed using COMSOL (Version 5.1, 2015) to investigate the DEP forces between two adjacent spheres. Two spheres of radius a=30 μm with dielectric constant ɛp=106, separated by distance s, were placed at the centre of a cylinder of radius 6 mm and height 12 mm with dielectric constant ɛoil=2.5. The axial symmetry made it possible to reduce this 3D problem to 2D for computational efficiency. The reduced system was divided into more than 20,000 triangular elements. One sphere was kept at a voltage U, the other isolated, while satisfying net charge neutrality. The boundaries of the cylinder were grounded. The DEP forces between the two spheres were obtained by computing the induced surface charges and directly summing over the electrostatic forces exerted on them.
The data that support the findings of this study are available from the corresponding authors upon request.
How to cite this article: Rozynek, Z. et al. Formation of printable granular and colloidal chains through capillary effects and dielectrophoresis. Nat. Commun. 8, 15255 doi: 10.1038/ncomms15255 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Z.R. acknowledges financial support of the Foundation for Polish Science (Homing Plus/2013–7/13) and of the Polish National Science Centre through OPUS programme (2015/19/B/ST3/03055). M.H. and E.L. were supported by the U.S. National Science Foundation through Grant Nos. DMR-1121262 at the Materials Research Center of Northwestern University and DMR-1610796, and the Center for Computation and Theory of Soft Materials (CCTSM) at Northwestern University. F.D. was supported by the Foundation for Polish Science within the project Homing Plus/2012–6/3, co-financed by the European Regional Development Fund. A.J. acknowledges financial support of the Polish National Science Centre through OPUS programme (2015/17/B/ST7/03566). P.G. acknowledges support via the European Research Council Starting Grant 279647 and Foundation for Polish Science Idee dla Polski program. Z.R. thanks H. van Damme (ESPCI-ParisTech) for fruitful discussions.
Pulling a conductive chain out of a dispersion of silver coated hollow silica spheres (radius ~30 μm) in silicone oil (η= 50 mPa·s). The electrode is elevated at an average speed of around 1 mm·s-1.
Viability over a wide range of particle size: (a) ~100 nm, (b) ~15 μm, (c) ~25 μm, (d) ~55 μm, (e) ~100 μm, (f) ~200 μm. The structure in panel (a) is a chain of nanoparticle aggregates rather than individual particles, with thickness of about 1 μm.
Contact charge electrophoretic particle oscillations. A granular chain composed of 100 μm stainless steel particles is assembled in silicone oil, and then the electric voltage is turned off to enable fracturing of the chain. Once the voltage is turned on again, the fractured chain reconnects. At high frequencies of the electric voltage (above ~100 Hz), the entire chain moves back towards the electrode. For lower frequencies, particles may experience an oscillating motion due to the contact charge electrophoresis. This effect is demonstrated here at frequencies 1 Hz and 1 mHz.
About this article
Nanoscale Research Letters (2018)