At two trench segments below the Andes, the Nazca Plate is subducting sub-horizontally over ∼200–300 km, thought to result from a combination of buoyant oceanic-plateau subduction and hydrodynamic mantle-wedge suction. Whether the actual conditions for both processes to work in concert existed is uncertain. Here we infer from a tectonic reconstruction of the Andes constructed in a mantle reference frame that the Nazca slab has retreated at ∼2 cm per year since ∼50 Ma. In the flat slab portions, no rollback has occurred since their formation at ∼12 Ma, generating ‘horse-shoe’ slab geometries. We propose that, in concert with other drivers, an overpressured sub-slab mantle supporting the weight of the slab in an advancing upper plate-motion setting can locally impede rollback and maintain flat slabs until slab tearing releases the overpressure. Tear subduction re-establishes a continuous slab and allows the process to recur, providing a mechanism for the transient character of flat slabs.
With slab pull as major driver of subduction1,2, the dynamic causes of the 200–300 km long ‘Peruvian’ and ‘Pampean’ flat slabs are intriguing3,4,5,6 (Fig. 1). A key step towards assessing the possible causes of flat-slab generation is to reconstruct their kinematic evolutions based on geological expressions that date the onset of flat slab subduction. Such expressions include the migration of the volcanic front to the east away from the trench, a trench-normal expansion of arc magmatism, extinction of the magmatic arc, eastward migration of crustal deformation, and retro-foreland basin subsidence7,8,9. Apart from the Peruvian and the Pampean flat slabs that formed since ∼11 and ∼12 Ma, respectively9,10, several older flat slab subduction episodes have been interpreted to have occurred in segments along the Andean subduction zone since ∼42 Ma (ref. 9).
The Andean flat slabs were originally proposed to result from the overall positive buoyancy of the subducting Nazca plate induced by volcanism-related thickening along, for example, the Nazca and Juan Fernandez Ridges and a delayed basalt-to-eclogite transition in the subducted crust4,11,12,13,14,15,16(Fig. 1). For pre-Miocene flat slab episodes, however, the correlation between flat slab subduction and arrival of such positively buoyant bathymetric impactors at the trench are not supported by plate kinematic reconstructions17, implying that other mechanisms, such as westward overriding plate motion relative to the mantle of the South American (SAM) plate, contribute to triggering flat slab subduction15,16,18,19. Recent numerical subduction modelling shows in addition that lateral changes in thermal thickness of the overriding plate20 or a thick overriding lithosphere increase the propensity for creating upward hydrodynamic slab suction often expressed as an under-pressured mantle wedge19,21,22, although this may not apply to the Pampean flat slab of Chile22.
Whatever may be the cause, flat slab formation must comply with the relative motions between the subducting Nazca plate, the overriding SAM plate, and, importantly, the mantle. While the formation of the Andes has been viewed in context of absolute plate motion of the South American plate23, that is, in a mantle frame of reference, flat-slab formation has not, even though it is essential for determining the role of, for example, slab rollback in the process. We will therefore first develop a kinematic reconstruction of shortening in the Andes. In combination with the absolute motion of South American trench estimated from mantle reference frames, this reconstruction will provide the absolute motion of the Andean trench. Next, with constraints on the age of flat slab formation (11–12 Ma)9,10, the Nazca Plate subduction rate through time from the SAM-Antarctica(-Pacific)-Nazca plate circuit24, the current dimensions of the flat slabs5,6, and the absolute (African) plate motion evolution25, we will quantify the relationship between the flat slab length, rollback of the slab bend, and the amount of subduction since the onset of flat slab formation. This will be used as basis to evaluate possible dynamics triggering and supporting flat slab subduction.
We develop a mantle-fixed reconstruction since ∼50 Ma, in which we restored the relative motions between the overriding SAM plate (O), the downgoing Nazca Plate (D), the intervening trench (T) and as a key new element, the slab bend (B) under the overriding plate that marks the end of the flat plate and slab where the downgoing slab dips into the upper mantle (M) (Fig. 2). In such reconstructions flat slabs appear when the westward retreat of the trench is faster than the westward rollback, which we define as the retreat of the slab bend relative to the mantle (Fig. 2b). The total amount of rollback since the start of the reconstruction equals the total amount of SAM (O) motion relative to the mantle minus SAM shortening in the Andes, which we include in the trench motion (T; Fig. 2), and minus flat slab length (Mode 2; Fig. 2b). We assume that initially the slab bend coincided with the reconstructed position of the trench at 50 Ma. If flat slabs were already present at 50 Ma (ref. 26), the net amount of rollback would be even more than reconstructed here. In absence of rollback and overriding plate shortening (Fig. 2b.), at least 1,400±180 km long flat slabs should have formed since ∼50 Ma, corresponding to the total westward motion of SAM25 (Fig. 2c). The modern Andean flat slab segments are, however, only 200–300 km long. To assess the difference, we first need to quantify the overriding plate shortening history by kinematically restoring the Andean fold-thrust belt relative to SAM.
Shortening reconstruction Andes
Our shortening reconstruction of the Andean fold-thrust belt is based on 50 published balanced cross-sections (Fig. 3, Supplementary Table 1) distributed between 3°S and 56°S, combined with constraints on subduction erosion estimates, local strike-slip-fault displacement estimates and paleomagnetic data (see Methods section). Our restoration uses published maximum estimates of Andean shortening, which leads to a minimum estimate of trench retreat and hence reconstructs the minimum amount of roll-back required to avoid the formation of flat slabs. Shortening in the Andes is illustrated by subdividing the fold-thrust into 12 commonly recognized geomorphic regions (Figs 1 and 3), whereby we restored shortening identified in each zone. The Northern Andes, where another flat slab was recently reported27, is not reconstructed in detail because of additional complexity due to interaction with a third (Caribbean) plate28. In the south, our reconstruction stops at the Scotia Sea.
Snapshots of the reconstruction of the Andes through time are shown in Fig. 3. The Bolivian Andes is the region with the largest total shortening, located in the centre of the Arica Bend. Our estimate is consistent with previous results29 and estimates a shortening of ∼420 km with rotations of 13° clockwise south of the bend and 13° counterclockwise north of the bend. To the south, shortening in the Argentinian Andes decreases to ∼160 km. Approximately 150 km of shortening was determined for the northern part of our reconstructed region. Our reconstruction of Andean shortening, which benefits from the largest number of balanced cross sections to date, coincides well with previous estimates of along-strike shortening variations in the Andes30 (Fig. 4). Shortening models that do not take into account vertical axis rotations23,31 yielded total maximum shortening estimates up to 100–200 km smaller than in our model, and this difference may be used as the first-order uncertainty on the reconstruction. Because the Andes form by shortening of the overriding plate above a subduction zone, we assume that the upper crustal shortening is representative for shortening of the entire lithosphere, in conjunction with earlier studies32.
Quantifying subduction and rollback
Combining the shortening reconstruction of the Andes with the South America-Antarctica-(Pacific)-Nazca plate circuit24, we arrive at the important result that ∼1,000 km of Nazca plate has passed the trench and subducted since the 12 Ma onset of flat slab subduction (Fig. 5), whereas the modern flat slabs are only ∼200–300 km long. By implication, the lithosphere that subducted at 12 Ma must therefore have moved through the slab bend and currently resides much deeper in the mantle while the observed flat slab only constitutes lithosphere that subducted since ∼3 Ma.
This relationship between the length of subducted lithosphere since the onset of flat slab formation and the length of the flat slab suggests that the flat slabs may not be directly related to a resistance of the Nazca lithosphere against subduction. We therefore evaluate whether an alternative explanation may be found in the relationship between trench motion, slab bend motion, absolute SAM plate motion, and the observed flat slab by placing our reconstruction in a mantle reference frame. This will determine the amount of trench retreat relative to the mantle since 50 Ma. A recent study33 tested mantle reference frames against a set of independent geodynamic criteria of realistic subduction zone behaviour34 and found that the global moving hotspot reference frame25, two Indo-Atlantic moving hotspot reference frames35,36, and a slab-fitted reference frame37 perform best. Because the latter frame is subject to the largest, and poorest defined uncertainties and was designed particularly for Mesozoic absolute plate motions, we use the moving hotspot reference frames to place our reconstruction in absolute plate motion context. The global moving hotspot reference frame25, shows ∼1,400±180 km of westward absolute South American plate motion since 50 Ma. The Indo-Atlantic moving hotspot frame predict a motions that are ∼100 km more35, or less36 since this time (Fig. 6). Combined with our Andean reconstruction, we estimate a minimum of ∼1,000±180 km of westward Andean trench retreat since 50 Ma, that is, with a long-term average trench retreat rate of ∼20±4 mm per yr.
This long-term trench retreat rate implies that since ∼12 Ma, ∼240±50 km of trench retreat occurred, which coincides with the width of the modern flat slabs. By implication, no significant rollback of the slab bend (that is, B and M coincide in the velocity diagrams in Fig. 2b) has occurred in these segments since 12 Ma, while ∼1,000 km of the Nazca plate has continued to subduct. From a kinematic point of view, flat slab formation since ∼12 Ma resulted from SAM overriding the slab bend that remained essentially stationary in the mantle (Fig. 5).
We now explore a dynamic explanation for the stagnation of the slab bend relative to the mantle during flat slab formation. A thousand kilometres of trench retreat and without forming flat slabs of this length requires slab rollback. When viewed in a mantle reference frame, slab rollback requires that mantle material is removed from below the slab. This occurs through toroidal flow around slab edges, or through tears or holes in the slab, and poloidal flow around its base if possible38,39,40,41,42. The mantle flow speed and lateral length of the flow path in the sub-slab mantle limits the rollback speed and facilitates slab stagnation and potential flat slabs for laterally long subduction zones43. Slab stagnation may explain why most shortening, averaged over the last 50 Ma, occurred in the central segment of the Andes29, a proposed potential rollback ‘stagnation point’44 based on seismological inferences of trench-parallel mantle flow in the sub-slab mantle. Assuming a contiguous 7,000 km slab below the Andes, rollback would have been slowest in this central segment, and normal and shear stresses at the subduction interface between the advancing SAM and the downgoing Nazca plate would have been highest43. Thus flat slab formation is expected in the 50 Ma subduction history of the central Andes. However, the current slab geometry, with two flat slabs segments separated by a dipping slab that has been able to roll back rather than one flat segment in the central part of the Andean subduction zone suggests that the triggers and maintenance of flat slabs require additional mechanisms.
Our new kinematic restoration demonstrates that the explanation for the formation of the Andean flat slabs needs to take into account the overall setting of absolute plate motion-forced trench retreat and roll-back, and must allow for subducting lithosphere to move through the flat slab segment and slab bend. A proposed mechanism to explain the modern flat slabs includes subduction of a thick and buoyant oceanic crust (for example, an aseismic ridge), combined with a delayed basalt-to-eclogite transition for the negative buoyancy necessary for subduction at a steep angle14,15,19 beyond the slab bend. A transition delay of ∼3 Myr would explain the ∼250 km long Pampean flat slab, provided that the subducted aseismic ridge was at least ∼1,000 km long. While subduction of aseismic ridges or otherwise buoyant oceanic crust may provide the initial trigger for a flat slab, other dynamic mechanisms may be called on to maintain the geometry and inhibit rollback. Recent numerical modelling19,45 suggested that upward dynamic suction of the mantle wedge can only effectively lead to a local flat slab in case of the subduction of a buoyant oceanic plateau, although this effect depends on the adopted mantle rheology18, and on the nature of the overriding plate, being more pronounced when the slab subducts under a thicker and stronger upper plate46,47. This dynamic suction as a mechanism of maintaining the Pampean flat slab is uncertain due to the unknown proximity of the Amazonian craton22. Also it is debated if buoyant oceanic plateaus or ridges were available to initiate and maintain the Cenozoic flat slabs below the Andes17.
Therefore we want to draw attention to the role of another potential dynamic contribution that may assist dynamic slab suction and does not require large amounts of subducted buoyant oceanic plateau to maintain flat slab subduction. This dynamic contribution is the creation of an overpressured sub-slab mantle as inferred in laboratory48 and numerical experiments of subduction in an advancing upper plate setting19. An overpressured sub-slab mantle tends to lift the slab, may occur in concert with hydrodynamic slab suction above the slab19,45,49 and is particularly reported for rollback of the Nazca slab22,50 and of the Farallon slab being overridden in the Late Cretaceous and Paleogene by the North American plate51. The over-pressure of the sub-slab mantle drives trench-parallel mantle escape during rollback43,50 and may even lead to slab stagnation for laterally wide slabs, where slowed removal of sub-slab mantle has become the rollback inhibiting process43.
Our result that the slab bend of the flat slab did not appreciably roll back below the westward advancing SAM plate over the last 12 Myr confirms such slab stagnation for the flat slab regions of South America. It implies that mantle material below flattening segments of the slab does not escape and is in fact being trapped under the flattening slab by dipping slab segments to the North, East and South. This ‘semi-dome’, horse-shoe slab-geometry, open to the west (Fig. 7), may eventually develop toward a slab tunnel52 that further supports flat subduction while allowing the eastward escape of material below the slab at the eastern tip of the semi-dome, or may collapse once the dynamic over-pressure of the sub-slab region is released by flow through slab tears45,51.
We propound that in the case of a laterally long subduction zone with trench retreat forced by the advancing upper plate (as for the Nazca and Farallon subduction zones), an overpressured sub-slab mantle immediately responds to any local decrease in subduction angle, initiated by one or more of previously proposed flat slab triggers4,11,15,17,19,21,53, to help create and maintain a flat slab that is instantaneously underlain by the overpressured sub-slab mantle. The trapped mantle underneath the flat slab would impede rollback of flat-slab segments, explaining our primary observation. Importantly, in the case of long subduction under a mantle-stationary overriding plate with large lithosphere thickness, 3-D numerical shows that local flat slab creation due to hydrodynamic slab suction alone is highly transient and short-lived (<5–6 Myr) because of sinking of slab to either side of the flat portion47 or isolated by tearing directly around the flat slab54. We explain this as resulting from the absence of an overpressured sub-slab mantle, which we argue is naturally produced in a laterally long subduction zone undergoing trench retreat. The over-pressurized sub-slab mantle would contribute to longer flat slab support. Eventually, slab tearing at the edges of the flat slab, both observed55,56 and modelled14,54, or formation of slab tears/holes in the centre of the flat slab22,45, will allow escape of the trapped mantle56 releasing the sub-slab overpressure, and the flat slab segment (perhaps minus a part of its crust that underplates the upper plate14) steepens and becomes part of renewed slab rollback. Subsequent subducting of the slab tears can accommodate mantle throughput from the sub-slab mantle to the topside51 until they disappear into the deep mantle. A possible example of a deep Nazca slab conduit, although of uncertain origin, facilitating such mantle flow can be found in recent tomography57 of the Nazca slab under the Bolivian Orocline, Central Andes, where below depths of 600 km an eastward pointing cusp in slab geometry is identified that seems associated with a hole in the slab. This deep tear in the slab may perhaps have a geometrical (lateral slab bending) origin as it also occurs as such in recent 3-D modelling of the Nazca subduction45. An overview of SKS splitting results58 shows anomalous and puzzling E-W fast splitting patterns in the subslab mantle59 in a narrow zone (∼150 km in N-S extent) that geographically aligns in E-W direction with the deep slab hole. Shear deformation associated with upper mantle flow toward the hole and escaping eastward trough the hole could provide a plausible explanation for the observed splitting observations while the flow itself would release subslab pressure and contribute to local rollback of the Central Andes slab.
With reconstructed Cenozoic subduction rates of the Nazca Plate (80–90 km Myr−1) the slab tears that ended previous periods of flat subduction have rapidly disappeared in the deeper upper mantle followed by subduction of a wide sheet of continuous slab, which sets the stage for a next phase of flat subduction (partly) maintained by the overpressured sub-slab mantle (Fig. 7). This mechanism facilitates flat slabs that are both transient and regional features as suggested from the geological record9. Our kinematic analysis provides first-order constraints on the long-debated formation of the Andean subduction zone flat slab segments: we show for the example of the present-day flat slabs that their length coincides with the amount of westward absolute Andean trench motion since the 12 Ma onset of flat slab formation. From this, we draw the conclusion that the slab bend has been essentially stationary in the mantle, and rollback was apparently impeded. We suggest that previous stages of flat slab subduction below the Andes, inferred from magmatic and structural records9, can be explained in a similar way. We foresee that similar first-order constraints from tectonic reconstruction in a mantle frame may be obtained on the evolution of the long debated Late Cretaceous to Eocene Laramide flat slab in western North America60 which is similarly characterized by subduction rates of 80–90 km Myr−1 (ref. 24), and absolute westward motion of the North American plate25,37 allowing for rapid subduction of tears and subsequent build-up of sub-slab pressure. Our research highlights that whereas the kinematic evolution of mountain belts is straightforwardly analysed using a relative plate circuit, it is of key importance to study the geodynamics of subduction zones in a mantle reference frame such that the coupling between plates, subducting slabs and ambient mantle is properly accounted for.
Our reconstruction is made using the freely available software Gplates (http://www.gplates.org)61. We provide the shape and rotation file of the reconstruction as Supplementary Data 1 and 2, respectively. We illustrated the shortening partitioning over the Andes using 12 commonly defined geomorphologic regions, which are represented by the areas between different polylines in the reconstruction. Each polyline is subdivided in smaller portions based on the locations of cross-sections. These lines move with respect to each other during deformation and change in the area in between them reflects documented shortening. We reconstruct Andean deformation with respect to a fixed non-deforming South American continent in the east.
Constraints used for reconstruction
The kinematic reconstruction of the Andes is primarily based on shortening estimates from a total of 50 published balanced cross sections. Shortening directions have been reconstructed parallel to balanced sections where no vertical axis rotations were documented. For the timing of deformation, we followed the interpretations of the authors of the balanced cross sections, who generally constrained timing from stratigraphic ages of basin deposits, in combination with thermochronology from 40Ar/39Ar of micas and feldspars, zircon fission track, zircon (U-Th)/He, apatite fission track and apatite (U-Th)/He analyses. These indicate that Andean deformation occurred mainly in the last 50 Ma (ref. 29). Paleomagnetically documented rotation patterns in the Central Andes reveal counterclockwise rotation to the North, and clockwise rotations to the South of the Arica bend. Andean paleomagnetic data were primarily derived from volcanic forearc rocks and not from the retroarc fold-thrust belt where most deformation occurred since30 and thus reflect the total rotation differences accommodated through regional shortening variations in the Andean fold-thrust belt. Displacements along strike-slip faults, finally, are used where well constrained. For instance, geological and seismologic data indicate that the Cochabamba and the Rio Novillero Faults are left-lateral and right-lateral respectively, although the amount of displacement is poorly constrained29. The displacement and timing along the Magallanes–Fagnano fault system are also still under debate. The proposed displacements are in the same order of magnitude (20–55 km) but the age of formation ranges from 100 to 7 Ma (ref. 62).
The Gplates rotation and shape files, as well as a table of compiled shortening estimates and their literature sources that come with the Andes reconstruction are provided as Supplementary Files to this paper.
How to cite this article: Schepers, G. et al. South-American plate advance and forced Andean trench retreat as drivers for transient flat subduction episodes. Nat. Commun. 8, 15249 doi: 10.1038/ncomms15249 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Turcotte, D. L. & Schubert, G. Geodynamics Cambridge University Press (2002).
Wortel, M. J. R. et al. Dynamics of the lithosphere and the intraplate stress field. Philos. Trans. R. Soc. A 337, 111–126 (1991).
Barazangi, M. & Isacks, B. L. Spatial distribution of earthquakes and subduction of the Nazca plate beneath South America. Geology 4, 686–692 (1976).
Gutscher, M. A., Spakman, W., Bijwaard, H. & Engdahl, E. R. Geodynamics of flat subduction: seismicity and tomographic constraints from the Andean margin. Tectonics 19, 814–833 (2000).
Cahill, T. & Isacks, B. L. Seismicity and shape of the subducted Nazca plate. J. Geophys. Res.: Solid 97, 17–503–17–529 (1992).
Hayes, G. P., Wald, D. J. & Johnson, R. L. Slab1.0: a three-dimensional model of global subduction zone geometries. J. Geophys. Res. 117, B01302 (2012).
Ramos, V. A., Cristallini, E. O. & Pérez, D. J. The Pampean flat-slab of the Central Andes. J. South Am. Earth Sci. 15, 59–78 (2002).
Stern, C. R. Active Andean volcanism: its geologic and tectonic setting. Rev. Geol. Chile 31, 151–206 (2004).
Ramos, V. A. & Folguera, A. Andean flat-slab subduction through time. Geol. Soc. Lond. Spec. Publ. 327, 31–54 (2009).
Jordan, T. E. et al. Andean tectonics related to geometry of subducted Nazca plate. Geol. Soc. Am. Bull. 94, 341–361 (1983).
Pilger, J. R. Plate reconstructions, aseismic ridges, and low-angle subduction beneath the Andes. Geol. Soc. Am. Bull. 92, 448–456 (1981).
Yáñez, G. A., Ranero, C. R., Huene,, von, R. & Díaz, J. Magnetic anomaly interpretation across the southern central Andes (32°–34°S): The role of the Juan Fernández Ridge in the late Tertiary evolution of the margin. J. Geophys. Res. 106, 6325–6345 (2001).
Martinod, J., Husson, L., Roperch, P., Guillaume, B. & Espurt, N. Horizontal subduction zones, convergence velocity and the building of the Andes. Earth Planet Sci. Lett. 299, 299–309 (2010).
Arrial, P.-A. & Billen, M. I. Influence of geometry and eclogitization on oceanic plateau subduction. Earth Planet Sci. Lett. 363, 34–43 (2013).
van Hunen, J., van den Berg, A. P. & Vlaar, N. J. A thermo-mechanical model of horizontal subduction below an overriding plate. Earth Planet Sci. Lett. 182, 157–169 (2000).
van Hunen, J., van den Berg, A. P. & Vlaar, N. J. On the role of subducting oceanic plateaus in the development of shallow flat subduction. Tectonophysics 352, 317–333 (2002).
Skinner, B. & Clayton, R. W. The lack of correlation between flat slabs and bathymetric impactors in South America. Earth Planet Sci. Lett. 371–372, 1–5 (2013).
van Hunen, J., van den Berg, A. P. & Vlaar, N. J. Various mechanisms to induce present-day shallow flat subduction and implications for the younger Earth: a numerical parameter study. Phys. Earth Planet. Inter. 146, 179–194 (2004).
Huangfu, P. et al. Thermo-mechanical controls of flat subduction: insights from numerical modeling. Gondwana Res. 40, 170–183 (2016).
Rodríguez-González, J., Negredo, A. M. & Carminati, E. Slab–mantle flow interaction: influence on subduction dynamics and duration. Terra Nova 26, 265–272 (2014).
Manea, V. C., Pérez-Gussinyé, M. & Manea, M. Chilean flat slab subduction controlled by overriding plate thickness and trench rollback. Geology 40, 35–38 (2011).
Hu, J., Liu, L., Hermosillo, A. & Zhou, Q. Simulation of late Cenozoic South American flat-slab subduction using geodynamic models with data assimilation. Earth Planet Sci. Lett. 438, 1–13 (2016).
Oncken, O., Hindle, D., Kley, J., Elger, K. & Victor, P. in The Andes–Active Subduction Orogeny (eds Oncken, O., Chong, G., Franz, G., Giese, P., Götze, H.-J., Ramos, V., Strecker, M.) 3–27 (Springer, 2006) doi:10.1007/978-3-540-48684-8_1.
Seton, M. et al. Global continental and ocean basin reconstructions since 200 Ma. Earth Sci. Rev. 113, 212–270 (2012).
Doubrovine, P. V., Steinberger, B. & Torsvik, T. H. Absolute plate motions in a reference frame defined by moving hot spots in the Pacific, Atlantic, and Indian oceans. J. Geophys. Res. 117, B09101 (2012).
Ramos, V. A. Anatomy and global context of the Andes: main geologic features and the Andean orogenic cycle. Geol. Soc. Am. Memoirs 204, 31–65 (2009).
Chiarabba, C. et al. Subduction system and flat slab beneath the Eastern Cordillera of Colombia. Geochem. Geophys. Geosyst. 17, 16–27 (2016).
Boschman, L. M., van Hinsbergen, D. J. J., Torsvik, T. H., Spakman, W. & Pindell, J. L. Kinematic reconstruction of the Caribbean region since the Early Jurassic. Earth Sci. Rev. 138, 102–136 (2014).
Eichelberger, N. & McQuarrie, N. Kinematic reconstruction of the Bolivian orocline. Geosphere 11, 445–462 (2015).
Arriagada, C., Roperch, P., Mpodozis, C. & Cobbold, P. R. Paleogene building of the Bolivian Orocline: Tectonic restoration of the central Andes in 2-D map view. Tectonics 27, TC6014 (2008).
Kley, J. & Monaldi, C. R. Tectonic shortening and crustal thickness in the Central Andes: how good is the correlation? Geology 26, 723–726 (1998).
Pope, D. C. & Willett, S. D. Thermal-mechanical model for crustal thickening in the Central Andes driven by ablative subduction. Geology 26, 511–514 (1998).
Williams, S., Flament, N., Müller, R. D. & Butterworth, N. Absolute plate motions since 130 Ma constrained by subduction zone kinematics. Earth Planet Sci. Lett. 418, 66–77 (2015).
Schellart, W. P., Stegman, D. R. & Freeman, J. Global trench migration velocities and slab migration induced upper mantle volume fluxes: constraints to find an Earth reference frame based on minimizing viscous dissipation. Earth Sci. Rev. 88, 118–144 (2008).
Torsvik, T. H., Müller, R. D., Van der Voo, R., Steinberger, B. & Gaina, C. Global plate motion frames: toward a unified model. Rev. Geophys. 46, RG3004 (2008).
O’Neill, C., Müller, D. & Steinberger, B. On the uncertainties in hot spot reconstructions and the significance of moving hot spot reference frames. Geochem. Geophys. Geosyst. 6, Q04003 (2005).
van der Meer, D. G., Spakman, W., van Hinsbergen, D. J. J., Amaru, M. L. & Torsvik, T. H. Towards absolute plate motions constrained by lower-mantle slab remnants. Nat. Geosci. 3, 36–40 (2010).
Faccenda, M. & Capitanio, F. A. Seismic anisotropy around subduction zones: Insights from three-dimensional modeling of upper mantle deformation and SKS splitting calculations. Geochem. Geophys. Geosyst. 14, 243–262 (2013).
Schellart, W. P. Kinematics of subduction and subduction-induced flow in the upper mantle. J. Geophys. Res. 109, 1–19 (2004).
Funiciello, F., Faccenna, C. & Giardini, D. Role of lateral mantle flow in the evolution of subduction systems: insights from laboratory experiments. Geophys. J. Int. 157, 1393–1406 (2004).
Funiciello, F. Dynamics of retreating slabs: 2. Insights from three-dimensional laboratory experiments. J. Geophys. Res. 108, 2207–2216 (2003).
Jadamec, M. A. & Billen, M. I. Reconciling surface plate motions with rapid three-dimensional mantle flow around a slab edge. Nature 465, 338–341 (2010).
Schellart, W. P., Freeman, J., Stegman, D. R., Moresi, L. & May, D. Evolution and diversity of subduction zones controlled by slab width. Nature 446, 308–311 (2007).
Russo, R. M. & Silver, P. G. Trench-parallel flow beneath the Nazca plate from seismic anisotropy. Science 263, 1105–1111 (1994).
Hu, J. & Liu, L. Abnormal seismological and magmatic processes controlled by the tearing South American flat slabs. Earth Planet Sci. Lett. 450, 40–51 (2016).
Manea, V. C., Perez-Gussinye, M. & Manea, M. Chilean flat slab subduction controlled by overriding plate thickness and trench rollback. Geology 40, 35–38 (2012).
Taramón, J. M., Rodríguez-González, J., Negredo, A. M. & Billen, M. I. Influence of cratonic lithosphere on the formation and evolution of flat slabs: insights from 3-D time-dependent modeling. Geochem. Geophys. Geosyst. 16, 2933–2948 (2015).
Boutelier, D. A. & Cruden, A. R. Impact of regional mantle flow on subducting plate geometry and interplate stress: insights from physical modelling. Geophys. J. Int. 174, 719–732 (2008).
Tovish, A., Schubert, G. & Luyendyk, B. P. Mantle flow pressure and the angle of subduction: non-Newtonian corner flows. J. Geophys. Res. 83, 5892–5898 (2012).
Lin, S.-C. Three-dimensional mantle circulations and lateral slab deformation in the southern Chilean subduction zone. J. Geophys. Res. Solid Earth 119, 3879–3896 (2014).
Liu, L. & Stegman, D. R. Segmentation of the Farallon slab. Earth Planet Sci. Lett. 311, 1–10 (2011).
Crameri, F. & Tackley, P. J. Spontaneous development of arcuate single-sided subduction in global 3-D mantle convection models with a free surface. J. Geophys. Res. Solid Earth 119, 5921–5942 (2014).
O’Driscoll, L. J., Richards, M. A. & Humphreys, E. D. Nazca-South America interactions and the late Eocene-late Oligocene flat-slab episode in the central Andes. Tectonics 31, TC2013 (2012).
Mason, W. G., Moresi, L., Betts, P. G. & Miller, M. S. Three-dimensional numerical models of the influence of a buoyant oceanic plateau on subduction zones. Tectonophysics 483, 71–79 (2010).
Antonijevic, S. K. et al. The role of ridges in the formation and longevity of flat slabs. Nature 524, 212–215 (2015).
Knezevic Antonijevic, S. K. et al. Effects of change in slab geometry on the mantle flow and slab fabric in Southern Peru. J. Geophys. Res. Solid Earth 121, 7252–7270 (2016).
Scire, A. et al. Imaging the transition from flat to normal subduction: variations in the structure of the Nazca slab and upper mantle under Southern Peru and northwestern Bolivia. Geophys. J. Int. 204, 457–479 (2016).
Long, M. D. et al. Overriding plate, mantle wedge, slab, and subslab contributions to seismic anisotropy beneath the northern Central Andean Plateau. Geochem., Geophys., Geosyst. 17, 2556–2575 (2016).
Polet, J. et al. Shear wave anisotropy beneath the Andes from the BANJO, SEDA, and PISCO experiments. J. Geophys. Res. 105, 6287–6304 (2000).
DeCelles, P. G., Ducea, M. N., Kapp, P. & Zandt, G. Cyclicity in Cordilleran orogenic systems. Nat. Geosci. 2, 251–257 (2009).
Boyden, J. A. et al. in Geoinformatics: cyberinfrastructure for the Solid Earth Sciences (eds Keller, G. R. and Baru, C.) 95–113 (Cambridge University Press, 2011).
Maffione, M. et al. Constraints on deformation of the Southern Andes since the Cretaceous from anisotropy of magnetic susceptibility. Tectonophysics 665, 236–250 (2015).
D.J.J.v.H. acknowledges ERC Starting Grant 306810 (SINK) and NWO Vidi grant 864.11.004. L.M.B. acknowledges NWO grant 824.01.004. W.S. acknowledges support from the Research Council of Norway through its Centres of Excellence funding scheme, project number 223272. We appreciated constructive comments of Wouter Schellart and two anonymous reviewers.
The authors declare no competing financial interests.
Supplementary Table and Supplementary References (PDF 522 kb)
Andes.gpml: Gplates shape file of the Andean shortening reconstruction. (XML 338 kb)
Andes.rot: Gplates rotation file of the Andean shortening reconstruction (TXT 376 kb)
About this article
Cite this article
Schepers, G., van Hinsbergen, D., Spakman, W. et al. South-American plate advance and forced Andean trench retreat as drivers for transient flat subduction episodes. Nat Commun 8, 15249 (2017). https://doi.org/10.1038/ncomms15249
Earth-Science Reviews (2020)
Genesis of early cretaceous leucogranites in the Central Sanandaj–Sirjan zone, Iran: Reworking of Neoproterozoic metasedimentary rocks in an active continental margin
Science China Earth Sciences (2020)
Detailed Structure of the Subducted Nazca Slab into the Lower Mantle Derived From Continent‐Scale Teleseismic P Wave Tomography
Journal of Geophysical Research: Solid Earth (2020)
Orogenic architecture of the Mediterranean region and kinematic reconstruction of its tectonic evolution since the Triassic
Gondwana Research (2020)