High-order harmonics in the extreme-ultraviolet spectral range, resulting from the strong-field laser-atom interaction, have been used in a broad range of fascinating applications in all states of matter. In the majority of these studies the harmonic generation process is described using semi-classical theories which treat the electromagnetic field of the driving laser pulse classically without taking into account its quantum nature. In addition, for the measurement of the generated harmonics, all the experiments require diagnostics in the extreme-ultraviolet spectral region. Here by treating the driving laser field quantum mechanically we reveal the quantum-optical nature of the high-order harmonic generation process by measuring the photon number distribution of the infrared light exiting the harmonic generation medium. It is found that the high-order harmonics are imprinted in the photon number distribution of the infrared light and can be recorded without the need of a spectrometer in the extreme-ultraviolet.
Strong-field laser-atom interactions induced by intense laser pulses led to the observation of high-order harmonics (HOH) in the extreme-ultraviolet (XUV) spectral range1,2. Due to its coherent properties, this radiation has been used in a broad range of applications ranging from ultrafast XUV science3,4 to high-resolution spectroscopy in the XUV5,6. In the majority of these studies the harmonic generation process is described by semi-classical approaches (three-step model)7, treating the electron quantum mechanically while, due to the high-photon number, the electromagnetic field of the driving laser pulse is treaded classically. Hence, the driving infrared laser radiation is ordinarily understood not to be affected by the interaction. On the experimental level, due to the short wavelength of the generated HOH, measurements are typically performed under high vacuum conditions using specialized XUV equipment.
Another major area of research in optical science, decoupled from ultrafast and strong-field physics, has been quantum optics, founded on the quantized radiation field. The state of the latter is directly affected by the light-matter interactions usually studied with low-photon number light sources. Central to these studies was the measurement and interpretation of light’s intensity fluctuations8,9.
Here we experimentally demonstrate the unification of the above fields, as we obtain the HOH spectrum by measuring the energy distribution (or equivalently the photon number) of the infrared light exiting the harmonic generation medium, that is, without using an XUV spectrometer. The quantum-optical nature of the measurement relies on the fact that we do not solely exhibit energy conservation in the infrared-XUV interaction, which is an expected aggregate effect, but we explicitly measure photon number distribution, which has a quantum-optical nature. This is achieved by utilizing an XUV/infrared correlation approach, to subtract the large background (where the signal of interest is built in) resulting from the initial infrared photon number and interaction processes not leading to XUV emission. It is found that the infrared photon number distribution consists of a series of well-resolved peaks corresponding to the HOH spectrum and containing all its well-known features (plateau and cutoff region, infrared intensity dependence).
The theoretical understanding of the measurement was based on the extension of the three-step semi-classical theory7 to the quantum-optical regime10, where the infrared field is treated quantum mechanically. This approach takes into account the back-action of the strong-field laser–atom interaction on the driving infrared laser field (Supplementary Note 1), which is imprinted in the probability distribution of the infrared photons after the interaction with the gas phase medium (Fig. 1). Initially (Fig. 1a) the incident multi-cycle infrared light in a coherent state has Gaussian photon number distribution. After the coherent interaction with na atoms towards the generation of XUV radiation (Fig. 1b), the distribution consists of peaks, named infrared (IR)-harmonics (Fig. 1c), which correspond to the HOH order q=ωXUV/ωIR (Fig. 1d). Since each atom absorbs q infrared photons towards the generation of the q-order harmonic, these peaks represent the missing infrared photon number . Note, that na is a parameter, which can be obtained by the detected photon number taking into account the propagation effects and phase matching conditions11,12. In particular10, it is found that the infrared photon number probability distribution Pn after the interaction with na atoms of the medium depends on the probability amplitudes An and a phase Φ(ti, tr) (ti, tr are the ionization and recombination times, respectively) (Supplementary Note 1). Since the amplitudes An depend on and ti, tr are directly linked to the XUV spectral phase distribution, measuring infrared-harmonics can reveal the XUV spectrum and in principle the spectral phase distribution of the XUV light. Here we demonstrate the former.
Experimental approach and results
The experimental set-up is shown in Fig. 2a. A 25 fs Ti:Sapphire laser pulse of 800 nm carrier wavelength, 10 Hz repetition rate and ≈0.6 mJ energy per pulse was split in two by a beam splitter. The transmitted beam (IR0), with photon number ≈1015 photons per pulse, was focused by a 30 cm focal length lens (L) onto a Xenon gas-jet where the HOH were generated. After passing through the HOH generation region, the infrared beam was attenuated by a factor of T−1=3 × 106 (T is the transmission coefficient) and the exiting beam (IR1) was recorded by the photodiode PD1. The beam reflected from the beam splitter, after attenuation, was recorded by the photodiode PD2 and the generated XUV radiation by a photomultiplier (PMT). The signals of PD1, PD2 and PMT, denoted by SPD1, SPD2 and SPMT, respectively, were simultaneously recorded for each laser shot. SPD1 was used for recording the probability distribution of the energy of IR1, while SPD2 and SPMT were used for removing the energy fluctuations of the laser and the unwanted background caused by processes irrelevant to the XUV emission, respectively. The background is an XUV-infrared non-correlated signal which introduces an offset and reduces the visibility of the infrared distribution which is correlated with the XUV emission. When the Xenon gas-jet was off, SPD1 and SPD2 were balanced (Fig. 2b) with corresponding photon number N0≈3.3 × 108 photons per pulse. When the gas-jet was on, SPMT increased while SPD1 was reduced (Fig. 2b).
This observation, which is in fair agreement with the predictions of the ADK theory13 (reduction by a factor of ∼1.5 that is, photons per pulse), reflects energy conservation, where and photons of the infrared beam are absorbed towards HOH generation and all other processes, respectively. reflects the remained infrared photon number resulted after the absorption of and photons. Moreover, both the reduction of SPD1 (increase of SPD2–SPD1) and the enhancement of SPMT have the same non-linear dependence with IR0 intensity (Fig. 2c), also in agreement with the ADK theory.
The calibration of the PMT signal to the photon number was done by taking into account the quantum efficiency of the detector, the reflectivity of the XUV optics and the XUV filter transmission (Methods section). For the infrared beams, the signal of the diodes was calibrated to the photon number using three different approaches which lead to the same result: (I) by corresponding the diode signal to the infrared energy value (measured by a power-meter) taking into account the transmission of the optical elements and the neutral density filters (with transmission coefficient T, with T−1=3 × 106), which have been used in order to avoid saturation effects in the diode; (II) using the specifications (responsivity and load resistance) of the photodiodes; and (III) by means of a single-photon counter.
Although an accurate calculation of the probability distribution requires the consideration of the infrared laser bandwidth and the propagation effects in the medium, a rough estimation that can provide an indicative value of the infrared photons absorbed towards the harmonic emission and the main features of their distribution can be given by correcting the measured harmonic photon number for the XUV absorption effects. The XUV photon number at the output of the Xenon gas found to be in the order of N(XUV)∼108 photons per pulse translating to photons per harmonic (where 5 is the number of harmonics lying in the plateau region). Taking into account the experimental conditions, it turns out that the XUV photon number is reduced due to absorption effects in the medium by a factor of A≈5 × 104 (Methods section). Considering that q infrared photons are required for the generation of the qth harmonic, the number of the infrared photons absorbed towards harmonic emission is photons per pulse (for q=17), translating to photons per pulse at PD1. In addition, the photon number difference between consecutive peaks (Δq=2) in the IR1 probability distribution is expected to be photons per pulse (where photons per pulse). Although the above estimations are rough, they depict the feasibility of performing infrared photon distribution measurements for revealing the high-order harmonic spectrum using conventional detection techniques. In addition, we would like to point out that, although the interpretation of our measurement is independent of the value of na, the derivation of na from the detected number of XUV/infrared photons requires careful consideration of the experimental conditions and propagation effects of the XUV/infrared fields in the harmonic generation medium11,12, which is beyond the scope of this work. Taking into account the above, SPD1 is expected to have a distribution located around photons per pulse with the harmonic peak structure being about 2 orders of magnitude smaller.
The probability distribution of the energy of IR1 reaching PD1 is shown in Fig. 3a. To minimize the effect of the laser’s energy fluctuations, we gate SPD2 and keep only those pulses having energy stability at the level of 1%. With the Xenon jet off, SPD1 has the same amplitude as SPD2 (Fig. 2b) and similar fluctuations. With the Xenon jet on, the distribution of SPD1 is shifted towards lower intensities, 2 × 108 photons per pulse, and broadens significantly (Fig. 3a). The broadening results from the strong-field laser-atom interaction. A peak structure associated with the generation of harmonics is not clearly visible in this distribution. To enhance the peak visibility, we take advantage of the dependence shown in Fig. 2c and the measured anti-correlation of SPD1 with SPMT. Before doing so, we normalize SPMT (see the data analysis part of Fig. 2a) so that it has the same average value as SPD1, that is, we multiply SPMT with the ratio . The widths of the two distributions are the same, and their correlation map is shown in Fig. 3b. Since the centre of this distribution moves in an anti-correlated way when changing the infrared intensity (Fig. 2c), we define a cut in the distribution of Fig. 3b along the anti-correlated diagonal (Methods section), resulting in the distribution of Fig. 3c.
The infrared-harmonic distribution reveals the HOH peaks, as can be validated by the following systematic checks. First, the distribution exhibits all the known features (plateau and cutoff regions) of an HOH spectrum recorded by a conventional XUV spectrometer. It contains a series of well-resolved peaks, which correspond to the 9th–23rd harmonic orders. As expected for HOH generation in Xenon12, the 9th–15th infrared-harmonics are laying in the plateau spectral region while the infrared-harmonics >17th belong in the cutoff spectral region. Second, we compare the SPD1 distribution with a HOH spectrum recorded using a conventional XUV spectrometer. It is found that the relative intensity of the infrared-harmonics matches the intensity of the harmonics measured with the XUV spectrometer (blue shaded area in Fig. 3c). Third, the distribution was also recorded with Argon gas as harmonic generation medium. The 11th–19th infrared-harmonics are in the plateau spectral region, while the infrared-harmonics >21st are in the cutoff spectral region. Again, infrared-harmonics intensity is consistent with the spectrum measured with the XUV spectrometer (blue shaded area in Fig. 3d). The green dashed line (noted as ) is positioned at the number of measured infrared photons n corresponding to , which is obtained by extrapolating to q=0 the linear dependence of on q (Supplementary Note 2). This value of n coincides with the value corresponding to q=0 obtained from the harmonic spectrum (blue x axis in Fig. 3c,d) and reflects the remained infrared photon number resulting from the absorption due to processes other than harmonic emission . At the green dashed line, and the measured photon number (upper red x axis) is . Due to the weaker ionization of Argon the position of (where photons per pulse) is closer to N0 compared to the Xenon case (where photons per pulse), while as expected for HOH generation in Argon the number of infrared-harmonic peaks was increased and the cutoff position moved to higher harmonics. Fourth, we observe the shift of the cutoff region to lower order infrared-harmonics when reducing the intensity of the driving infrared laser (Fig. 4). This measurement is found to be in fair agreement with the results obtained (black-dashed lines) using the full quantum mechanical theoretical approach10. In addition to the above checks, the harmonic peak structure observed in the XUV distributions recorded by the PMT (Supplementary Note 3), and corresponding to Fig. 3c,d, further supports the above findings. We finally note, that understanding the rapid reduction of the infrared-harmonics laying below the ionization potential of Xenon and Argon (grey shaded area in Figs 3c,d and 4) requires more elaborate consideration of perturbative effects and ionization phenomena14, which is beyond the scope of this work.
Concluding, we experimentally demonstrated that the XUV harmonic spectrum generated in gas phase media is imprinted in the probability distribution of the energy of the infrared light exiting the harmonic generation medium. These findings constitute an experimental demonstration of the quantum-optical nature of the high-order harmonic generation process and pave the way for quantum-optical studies in the strong-field region. In particular, they allow to perform experiments in ultrafast XUV science using conventional infrared diagnostics.
A 25 fs infrared laser pulse was split in two by a beam splitter. The transmitted infrared beam (IR0), after passing through the interaction region, was transmitted through optical elements and neutral density filters (F1) having overall transmission coefficient T−1=3 × 106. The output infrared laser beam (IR1) was recorded by the PD1. The number of infrared photons reaching PD1 when the gas-jet was switched-off was N0≈3.3 × 108 photons per pulse. The beam reflected from the beam splitter was recorded by PD2. When the gas-jet was off, the signals of PD1 and PD2 were balanced by the neutral density filter F2. The piezo-based pulsed nozzle of ≈0.8 mm orifice diameter, which was constricted according to the configuration of ref. 15, provides a gas density in the interaction region ρ≈3 × 1018 atoms per cm3. The beam was focused ≈0.5 mm below the nozzle orifice resulting to a medium length Lmed≈1.2±0.1 mm. In this configuration the confocal parameter is more than an order of magnitude longer than the length of the medium and thus the intensity of the laser beam along the propagation in Xenon gas can be considered constant. The intensity of the laser in the Xenon gas-jet was kept below 1014 W cm−2, the Xenon ionization saturation intensity. The produced XUV light was reflected into a PMT by a multilayer-infrared-antireflection coating plane mirror placed at 75o, after passing through an Aluminium filter of 150 nm thickness. The photon number of the XUV radiation just after the Xenon gas was N(XUV)∼108 photons per pulse that is, photons per harmonic (where 5 is the number of harmonics lying in the plateau region). This value was obtained by taking into account the relative harmonic amplitudes measured by the XUV spectrometer (Fig. 3c), the harmonic signal measured by the PMT, the quantum efficiency (∼10%) and the gain (102–103) of the PMT which is used in the non-saturated region, the transmission of the Aluminium filter (∼70%) and the reflectivity of the plane mirror (∼50%). The HOH spectrum shown in blue shaded area in Fig. 3c was recorded using a conventional XUV spectrometer (without the Aluminium filter) and the same experimental conditions as those used for the measurement of the IR1 intensity distribution. We note, that mainly due to the uncertainty of the PMT gain, the value of N(XUV) is obtained with an accuracy of one order of magnitude.
Correlation map of Figure 3b
Figure 3b depicts the joint distribution of the XUV and transmitted infrared intensity. The widths of the individual distributions are seen to be the same (relative width about 7%). This is because both intensities have the same dependence on the incident infrared laser power, and the majority of the points on the joint distribution results from XUV/infrared uncorrelated events mainly associated with . However, we know that the centre of the joint distribution of Fig. 3b moves in an anti-correlated way with varying infrared intensity, as shown in Fig. 2c. Furthermore, we know the position of this centre with precision much larger than the widths of the individual distribution. In particular, the data consists of about 10,000 points, hence the position of the centre is known to within 7% × 10,000−1/2≈0.1%. To enhance the infrared-XUV correlation and produce the infrared-harmonic peaks, we perform a cut along the anti-correlated diagonal of Fig. 3b with width 0.4%. This is chosen to be larger than the precision of 0.1%, because it practically leads to an optimum visibility and statistical significance of the infrared-harmonic peaks.
Calibration of the infrared-harmonic spectrum
The identification of the harmonic spectrum on the infrared-harmonic distribution was done using the linear dependence of on q, setting the cutoff harmonics of the spectra recorded by the XUV spectrometer at the cutoff values of the infrared-harmonic distribution. In this way, the number of the harmonic orders, the constant spacing and the relative harmonic amplitudes recorded by the XUV spectrometer matches the peaks of the infrared-harmonic distribution. Also, this calibration provides a value for the position of in the distribution which coincides with the value of q=0 obtained by the harmonic spectrum (blue x axes in Fig. 3c,d; Supplementary Note 2). In addition, the infrared photon number which corresponds to the ionization potential of the atoms matches the region where the infrared distribution drops rapidly (grey shaded areas in Figs 3 and 4).
Estimation of the infrared photon number
To roughly estimate the main features of the infrared photon distribution correlated with the harmonic emission, we correct the measured harmonic photon number N(XUV) for the XUV absorption effects (single-XUV-photon ionization) in the Xenon gas12. For our experimental conditions where Lmed≈1.2 mm, the XUV absorption length caused by single-XUV-photon-ionization process is Labs(XUV)=1/ρσ(1)≈100 μm (cross section of Xenon σ(1)≈3 × 10−17 cm2). As Lmed>>Labs(XUV) and Lcoh>>Labs(XUV) (where Lcoh=π/Δk is the coherent length16,17, Δk=kL−qkL and kL is the wave number of the fundamental) it follows that the present experiment is conducted in the XUV absorption saturation regime. In this context the XUV photon number reaches the value of N(XUV)∼108 photons per pulse at the beginning of the medium and remains constant along the propagation as the XUV losses induced by the single-photon ionization are getting balanced by the infrared absorption which takes place along the propagation in the whole medium. Considering the medium as a single absorbing filter having exponential dependence on the medium length it follows that XUV photons are reduced due to absorption over the whole medium length (integration over the medium length) by a factor of A≈5 × 104. Considering that q infrared photons are required for the generation of the qth harmonic, the number of the infrared photons absorbed towards harmonic emission is photons per pulse (for q=17).
The data that support the findings of this study are available from the corresponding author upon request.
How to cite this article: Tsatrafyllis, N. et al. High-order harmonics measured by the photon statistics of the infrared driving-field exiting the atomic medium. Nat. Commun. 8, 15170 doi: 10.1038/ncomms15170 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We acknowledge support by the Greek funding program NSRF (ERC-07) and the European Union’s Seventh Framework Program FP7-REGPOT-2012-2013-1 under grant agreement 316165.