Micro-scale optical components play a crucial role in imaging and display technology, biosensing, beam shaping, optical switching, wavefront-analysis, and device miniaturization. Herein, we demonstrate liquid compound micro-lenses with dynamically tunable focal lengths. We employ bi-phase emulsion droplets fabricated from immiscible hydrocarbon and fluorocarbon liquids to form responsive micro-lenses that can be reconfigured to focus or scatter light, form real or virtual images, and display variable focal lengths. Experimental demonstrations of dynamic refractive control are complemented by theoretical analysis and wave-optical modelling. Additionally, we provide evidence of the micro-lenses’ functionality for two potential applications—integral micro-scale imaging devices and light field display technology—thereby demonstrating both the fundamental characteristics and the promising opportunities for fluid-based dynamic refractive micro-scale compound lenses.
Micrometre-scale optical elements have contributed significantly to the miniaturization of devices and instrumentation. Static micrometre-sized lenses have utility in integral imaging and 3D displays1,2,3, synthetic aperture imaging4, endoscopes5, plenoptic cameras6 and solar concentrators7. Dynamically switchable reflective micro-optics based on digital micro-mirror displays8 and continuously reconfigurable absorptive pixel technology enabled by liquid crystal displays9 have greatly enhanced the versatility of micro-optics. These methods have enabled transformative advances in optical technology ranging from high-resolution displays to structured illumination microscopy, holographic optical tweezers and wavefront-shapers10,11.
Morphological reconfiguration of micro-scale refractive components to enhance optical performance has recently been observed in the context of biological vision systems: rod photoreceptor cell nuclei in the retina of nocturnal mammals specifically adapt a bi-phase refractive index distribution to act as collecting lenses. These biological micro-lenses channel light towards the rods’ light sensing segments, thereby increasing the signal to noise ratio of retinal transmitted images12,13. Similarly, man-made, refractive micro-elements with reconfigurable morphology, enabling in-situ tunable optical properties are poised to complement and extend the capabilities of present micro-optical devices14,15,16,17. In particular, tunable micro-lens designs employed as responsive in-line, phase-modulating, intensity-preserving components will extend the light manipulation capabilities of optical systems10.
To this end, optofluidic devices using dynamic fluid lens materials represent an ideal platform to create versatile, reconfigurable, refractive optical components17,18. Droplets smaller than the capillary length, wherein surface tension is the dominant force, create curved interfaces between fluid volumes19 and display intrinsic lensing behaviour. In addition, liquids have minimal surface roughness on the order of nanometres, even if the interfacial tension is very low20,21. Dynamic lensing materials based on hydrogels and liquids can be reshaped through various external stimuli after the optical element is formed, which is ideal for adaptive optics, imaging devices or sensors14,22,23,24. For example, reconfigurable liquid lenses have been demonstrated by taking advantage of electro-wetting25,26,27,28,29,30,31,32 and the integration of microfluidics with MEMS technology16. Adjustable focal length lenses were realized using microfluidics, by varying the amount of liquid in a reservoir behind an elastic membrane22,33,34,35,36,37. Alternatively, the controlled flow of liquids within microfluidic channels can be used to create micro-lenses with variable focus38,39. Micrometre-sized solid-liquid doublet lenses that allow for minimization of optical aberrations have also been fabricated33. Tunable fluid micro-lenses, as individual components or arranged in arrays, have found applications in miniaturized optical components with variable working distances and optics-based biosensing devices40,41. Incorporation of dyes into the liquids allows for droplets that serve as both lenses and optical filters42. In particular, the incorporation of laser dyes in micro-fluidic droplets enables lasing-based sensing approaches with high sensitivity and throughput43.
We present herein the optical characteristics of a new generation of fluidic tunable compound micro-lenses. These compound micro-lenses are composed of hydrocarbon and fluorocarbon liquids that form stable bi-phase emulsion droplets in aqueous media44. The choice of constituent liquids can dramatically impact the optical properties. In this initial study, we focus on combinations of transparent fluids Fluorinert FC-770 with heptane , or hexane . The refractive index of the hydrocarbon constituent is higher than the refractive index of water , while the fluorinated component has a refractive index lower than that of water. The refractive index contrast at each material interface as well as the curvature of each interface contributes to the focusing power of a refractive optical element (see lens maker’s equation45). Therefore, we anticipated that these fluid combinations could allow for a wide tuning range of the emulsion lenses’ focal length, thereby enabling switching between converging or diverging lens geometries. The complex droplet lenses can be easily fabricated on a large scale using a temperature-induced phase separation technique appropriate for combinations of liquids having a relatively low upper critical solution temperature46. Most importantly, such complex droplets can be dynamically reconfigured between double emulsion and Janus (two-sided) morphologies through application of external stimuli, which makes these droplets very promising as highly tunable compound lenses. We demonstrate the adjustability in focal length of the lenses as well as their microscopic and macroscopic light manipulation characteristics.
Modelling of emulsion droplets as tunable lenses
For these particular emulsions, the curvature of the internal interface formed between the immiscible phases can be adjusted using surfactants that modify the relative interfacial tensions between the droplet phases and water. Surfactant-mediated modification of interfacial tensions results in a variation of the contact angles at the triple-phase contact line. This determines the radius of curvature of the lenses’ internal interface, which in turn affects the optical properties of the droplets (Fig. 1a,b). To demonstrate how the controlled, dynamic variation of the complex droplets’ geometry could induce a tunable interaction with light, a ray-tracing algorithm was implemented in MATLAB. The overall droplet shape was assumed to be spherical, which is an appropriate approximation when the interfacial tension between the droplet phases is much smaller than the interfacial tensions between the droplet constituents and the aqueous medium (Fig. 1a) (ref. 47). This is the case for working temperatures close to the critical temperature of the internal fluids. For the droplet diameters on the order of 100 μm discussed here, the internal interface can be considered to be spherical, since the ratio of gravitational to surface tension forces is small (see discussion in Methods). Under these assumptions, the distance l of the interface from the centre of the overall drop is given by
where Rd is the radius of the drop, Ri is the internal radius of curvature and vr is the volume ratio of the internal droplet phase to the outer droplet phase. The internal curvature is set by the balance of interfacial tensions at the triple-phase contact line47 given by
The derivation of equations (1) and (2) can be found in Supplementary Note 1.
When the optical axis is aligned with the droplets’ symmetry axis, the optical system is axisymmetric and can be modelled in two dimensions. The droplets’ symmetry axis aligns with the gravitational field due to the difference in density between the light hydrocarbon phase and the dense fluorocarbon phase. We exploit this alignment in our theoretical and experimental study of the droplets’ optical characteristics. The ray-tracing calculations predict that the double emulsion droplets with a high refractive index core phase and a lower refractive index shell phase can focus light, while an inversion of this droplet geometry results in diverging lenses (Fig. 1c,d). By adjusting the droplets’ internal interface curvature, each droplet can be tuned between a converging lens with varying positive optical power and a diverging lens with varying negative optical power. This optical behaviour is similar to the characteristic differences observed for the retina cell nuclei of nocturnal and diurnal mammals. Photoreceptor nuclei of nocturnal mammals concentrate on the highly refractive heterochromatin in the nuclear centre, while diurnal mammalian retina cells locate heterochromatin material towards their periphery12. The nucleus geometry with the higher refractive index material concentrated at the nucleus centre focuses light, while an inversion of this nucleic geometry leads to strong light scattering, similar to the double emulsions.
3D focus scans behind droplets with varying morphology
Based on the ray-tracing predictions, we expected that altering the droplet morphology would induce a change in the droplet’s focal length, which we aimed to demonstrate experimentally. In practice, the interfacial tensions that determine the droplet morphology can be tailored by controlling the concentration and ratio of surfactant species added to the aqueous phase. In our experiments, we used a combination of both a hydrocarbon-stabilizing surfactant, such as sodium dodecyl sulfate (SDS), and a fluorocarbon-stabilizing surfactant, such as Zonyl FS-300 or Capstone FS-30, as detailed in an earlier publication44. In order to map the light field behind heptane-FC-770 droplets, the droplets were illuminated with a collimated beam of quasi-monochromatic light of a 540 nm wavelength, and the light field in the volume behind the droplets was recorded by scanning the image plane of an inverted microscope (Fig. 2a). Variation in the concentrations of SDS and Capstone FS-30 in the surfactant mixture added to the aqueous phase allowed us to alter the droplets’ internal interface curvature resulting in a variation of their focal length (Fig. 2b).
Quantification of the droplet lenses’ optical characteristics
The native function of a lens is to form an image. In order to evaluate the image formation capabilities of the droplets, including experimentally quantifying their optical power, we placed an object in front of the droplets and used them to project an image at varying distances (Fig. 3a). Specifically, a grid pattern was projected in the aqueous medium above the droplets. The image of the object formed by the droplets was recorded using an inverted microscope. By varying the concentrations of SDS and Zonyl surfactant in the aqueous medium surrounding the droplets, the internal interface shape could be adjusted. By projecting the image of an object through the lenses and by measuring object-to-lens and lens-to-image distances (Fig. 3a–d), the micro-lenses’ effective focal length was quantified (Fig. 3e; see Supplementary Note 2 for details regarding the derivation of the effective focal length).
The internal interface curvature of the droplets was determined by fitting a circle to the interface shape observed in side-view micrographs (Fig. 3e, inset), taking into account refraction due to the outer droplet phase (see Methods). Knowing this curvature, we could compare the expected effective focal length acquired using the paraxial approximation and the ray transfer matrix calculations with the experimentally determined effective focal length (Fig. 3e). We found that FC-770-heptane droplets formed with volume ratio 1:1 can vary in focal length from 3.5 times the diameter of the droplet to infinity, and can switch between positive and negative focal lengths. For example, a double emulsion droplet of 100 μm diameter, with heptane as the core phase and the fluorocarbon FC-770 as the shell phase, has a focal length of 350 μm and acts as a converging lens. While we restricted the experiments presented here to lenses with constant volume ratio of 1:1, it is worth mentioning that a variation in volume ratio results in a change in radius of curvature of the internal interface and consequently in changes of the lenses’ focal length provided that the triple phase contact angles are kept constant. Ray-tracing results of droplets with constant contact angle and varying volume ratio can be seen in Supplementary Fig. 3. This additional degree of freedom suggests interesting future perspectives for multi-fluid lens optical systems, especially in terms of higher order aberration correction.
The configuration of the droplet in Fig. 1c-V is a special case where the droplets have an effective focal length of infinity. For the FC-770-heptane emulsions, this occurs when the interface is nearly flat; the refraction at the water–heptane interface is effectively cancelled by a compensating refraction at the FC-770–water interface. As expected, the lenses’ numerical aperture, given by , decreases with increasing focal length. Here n=1, since the image was formed in air beneath the droplet lenses, which were positioned on top of a glass coverslip.
To estimate the droplet lenses’ optical quality, we determined two important metrics used in the design of lenses: First, the two-point resolution criterion postulated by Rayleigh in 1896 provides a measure for the minimum distance between two object points for which these two points can still be distinguished unambiguously in the image projected by a lens. Second, the Abbe diffraction limit defines the maximum spatial frequency of a sinusoidally varying intensity pattern that can be resolved with sufficient contrast by the lens. We apply the standard definition of the Rayleigh two-point resolution criterion, which consists of determining the distance from the centre of the lenses’ point spread function (PSF) to its first minimum. With this definition, the theoretically achievable resolution rth of a diffraction-limited lens is given by . We experimentally estimated the PSF of droplets by imaging the focus formed by droplets that were illuminated with collimated light. We used a white light source but only exploited the image information of the camera’s red channel (with maximum quantum efficiency at 620 nm). The experiment was performed with droplets with a highly curved internal interface, assuming that their shorter focal length and higher numerical aperture NA≈0.12 would result in the best obtainable resolution (for experimental details, see Methods). From the experimental PSF estimate we find that the droplets can resolve details down to a feature size of rexp=3.7 μm. The theoretical two-point resolution limit of a comparable diffraction limited lens is rth=3.1 μm. We also determined an estimate of the Modulation Transfer Function (MTF) of the same droplets based on the experimentally obtained PSF estimate. The MTF’s cut-off frequency at a remaining image contrast of at least 10% of the original object contrast is found to be =0.22 cycles per μm, which corresponds to a sinusoidal intensity variation of 4.5 μm period. The theoretical line pattern resolution limit for a comparable lens is 3.2 μm (=0.31 cycles per μm). The discrepancy between the measured and the theoretical resolution limits is likely due to spherical aberrations.
Using micro-fluidics we can produce emulsion lenses with a highly uniform size distribution44. This can be seen in Supplementary Fig. 7a. Droplets of the same size, with the same volume ratio and matching internal interface curvature have matching focal lengths. This is apparent in the images and data presented in Supplementary Fig. 7b–d, which show that when light is focused through several lenses of the same size, all PSFs have similar shapes. We therefore conclude that all lenses have very similar focal lengths, and numerical apertures.
Potential applications of tunable droplet compound lenses
To explore potential application scenarios, we tested if the micro-scale optical tunability of the droplets could be translated to observable differences in macroscopic properties. We hypothesized that the predicted variation of the far-field angular intensity distribution of light scattered by the lenses as a function of their internal curvature (Fig. 4a) would result in changes in the macroscopic appearance of droplet assemblies. In the case of a strongly focusing double emulsion, finite difference time domain (FDTD) simulations show that a single droplet will scatter light in a cone with an opening angle of almost 30°. On the other hand, the Janus droplet with a nearly flat interface transmits light with an angular spread of only a few degrees. To test whether this phenomenon could be observed to create droplet-based displays, we formed films of polydisperse emulsion droplets covering an area of several cm2. The localized variation of the geometry of droplets in selected regions of the film was expected to lead to a visually perceivable change in its macroscopic appearance. In order to induce localized variations in droplet morphology, we employed an optically switchable azobenzene surfactant to change the morphology of the emulsions droplets, as previously described44,48. Irradiation of selected areas of droplets with UV light using a ‘smiley face’ photomask induces a transformation of the exposed droplets from the transparent Janus geometry to a strongly scattering double emulsion geometry. Simple visual inspection reveals a clear optical contrast when viewed in transmission (Fig. 4b). Exposure to UV radiation and blue light allows us to reversibly switch the compound lenses between these two morphologies again and again, without any signs of degradation. This stability and reversibility is in good agreement with observations reported by other groups that investigated the dynamic performance of similar photo-active surfactants49,50,51,52. While we have not investigated the response time of the droplets quantitatively, we expect changes in lens geometry to occur on a time-scale of less than 1 s. In fact, azobenzene derivatives have been shown to switch configuration states on the timescale of milli- or even microseconds53 and diffusion of the small surfactant molecules to and from the interface on the length scale of the droplet size occurs on millisecond timescales54.
The FDTD simulations predicted that droplets with an internal curvature somewhere between the extremes of the double emulsion state and the flat-interface Janus configuration scatter light in a cone with an opening angle larger than that of the Janus droplets, but smaller than that of the double emulsions (Fig. 4a). We tested if these optical differences could create surfaces with controlled spatial variation in perceived brightness (Fig. 4c) by finely adjusting the droplet’s internal curvature through careful tuning of the UV light exposure. To this end, we irradiated a droplet assembly through an MiT photomask in which a piece of scattering Scotch tape was placed over the stem of the ‘i’ to partially block UV transmission. Our expectation was that the partially blocked area would display smaller variations in curvature of the droplet-internal interfaces as compared to the fully exposed areas. Consistent with this design, we observed a significant decrease in pattern brightness in the modified photomask region of the sample when observed in direct transmission (Fig. 4d). The double emulsions scatter light into a larger angular range; consequently, when the same sample is viewed at an angle, the areas that were exposed to the UV radiation appeared brighter. Hence, we observe an inversion of the image (Fig. 4e) consistent with the FDTD simulations. In short, we can vary image contrast in the droplet films by photo-chemically modulating the degree of curvature of the droplets’ internal interface.
The droplets’ variable focal length and their capability to form images are properties that are particularly relevant for a variety of application scenarios related to miniaturized imaging devices. Arrays of micro-lenses, for example, find application in digital integral microscopic imaging and photography1,3. One of the main challenges in three-dimensional image acquisition is the limited depth of field2. The tunable focal length lenses could provide the means to address this limit. To evaluate whether the lenses could be considered for integral imaging applications, we produced monodisperse bi-phase double emulsion droplets and arranged them in a close-packed monolayer. This enables us to exploit the individual droplets’ imaging capabilities in multi-droplet assemblies. In such a multi-lens arrangement, each lens projects a plane elemental image of an object at slightly different angles (Fig. 4f–h). Therefore, each lens has a different perspective of an imaged 3D object. Computational recombination of the images from multiple lenses should then allow for the capturing of the three-dimensional forms of imaged objects.
Complex emulsions of optically distinct, immiscible hydrocarbons and fluorocarbons in aqueous media can form droplets that act as compound lenses with a tunable droplet-internal optical interface. Adjustment of the droplet’s interfacial tensions with the aqueous phase allows for a continuous and reversible variation from double emulsions, through Janus configurations, to inverted double emulsions. Depending on their configuration, the droplets show different interactions with light. Double emulsions with the optically denser fluid as the droplet-core phase strongly focus light. Janus droplets do not significantly disturb the light wavefront, when the surface normal of the internal interface is aligned with the light propagation direction. Double emulsions with the optically denser fluid as the droplet-shell phase show strong light scattering. A controlled modification of the droplet morphology consequently results in a predictable variation of the droplets’ light focusing and scattering behaviour.
We have shown that, depending on their morphology, the droplets can act as converging lenses projecting real inverted images, or as diverging lenses forming virtual upright images. These emulsion-based micro-lens droplets have a dynamically tunable focal length that can vary from ±3.5 × the drop diameter to ±infinity. With a resolution limit around 4 μm, the reconfigurable micro-lenses do not show diffraction-limited performance (resolution limit of 3 μm for a comparable diffraction-limited micro-lens), which we attribute to the presence of spherical aberrations. While the resolution limit of standard high numerical aperture microscope objectives is at least an order of magnitude higher, the microscopic droplet compound lenses have clear advantages in applications where device size, simplicity and the ability to reconfigure on-demand matters; this could be of particular interest in synthetic aperture integral imaging where in-situ reconfigurable optical components could help to enhance performance of the imaging device55. Liquid lenses with variable focal length could form the basis of adaptive micro-scale optical elements in miniaturized integral 3D imaging and sensing devices.
We have also shown that such tunable droplet micro-lenses exhibit differences in their macro-scale optical appearance, which can be used for the creation of patterns and images. Light scattering is significantly more pronounced for droplets in the double emulsion geometry, while droplets with a flat internal interface induce much smaller perturbations in the propagating light wavefront. This allows for the creation of microscopic and macroscopic patterns with tunable contrast, which could form the basis for light field displays capable of creating 3D images and projecting variable information content into different directions.
For the present work, we rely on gravity to orient the lenses with their symmetry axis perpendicular to the substrate due to the density difference between the constituent lens components. Future investigations may address the control of lens orientation and droplet morphology with forces other than gravity, including using stimuli such as light, thermal gradients and electric fields. While we focused on heptane-FC-770 droplets, there are a number of other materials that could be used in order to adjust the refractive index of the droplet phases. We have also conducted experiments using lenses formed from hexane and perfluorohexane, which showed similar optical characteristics as the heptane-FC-770 droplets reported here. Using halogenated liquids with high refractive index as constituents of the emulsion droplets would enable the formation of compound lenses with higher refractive power. This additional degree of freedom—the choice of emulsion formulation—could be used for correcting aberrations or for introducing a desired chromaticity. Incorporation of active optical media, plasmonic elements or magnetic nanoparticles will open up a broad parameter space for tuning and controlling the fluid micro-lenses’ dynamical optical properties, and simultaneously provide access to a multitude of enticing sensing paradigms and optical applications.
Double emulsion droplets were formed using a 1:1 volume ratio of heptane and Fluorinert FC-770 for the lensing experiments and a 1:1 volume ratio of (2:1 hexane:heptane) to FC-770 for the UV switchable droplets. For each of the two material combinations, the two fluids were combined in equal volumes and heated to just above the suspension’s upper critical solution temperature Tc to allow the two liquids to form a homogeneous mixture. An aqueous surfactant solution heated above Tc was then added, and the resulting mixture was quickly shaken to form small multi-disperse droplets, which were left to cool to allow the constituent oils to phase separate. Mono-disperse droplets were formed in a glass capillary microfluidic device that consists of an outer square capillary (outer diameter, 1.5 mm, inner diameter, 1.05 mm, AIT Glass), and an inner cylindrical capillary (outer diameter, 1 mm, World Precision Instruments). The capillary assembly was pulled to form a 30 μm tip using a P-1000 Micropipette Puller (Sutter Instrument Company). Harvard Apparatus PHD Ultra syringe pumps were used to inject the homogenous mixture of fluorocarbon and hydrocarbon into the inner capillary and aqueous surfactant solution into the outer capillary. The microfluidic device and syringe pumps were maintained at a temperature above Tc using a heat lamp while the drops were formed, and the drops were then cooled below Tc to induce phase separation. We closely followed the procedures reported previously44. The droplets were found to be stable on the timescale of several days, at least. We expect them to stay stable for much longer, provided the aqueous medium and sample environment are optimized (see Supplementary Note 5 and Supplementary Fig. 6).
Determining the curvature of the internal interface
The curvature of the internal interface between the droplets’ hydrocarbon and fluorocarbon phases was determined with a custom-built microscope with horizontal axis that allowed capturing side views of the droplets. For these experiments, the droplets were placed onto a hydrogel substrate enclosed between two coverslips. The microscope consists of an Olympus × 5 objective (NA=0.15), a Thorlabs tube lens (effective focal length=200 mm) and an OMAX 14.0MP Digital USB Microscope camera. A white screen was placed behind the sample, and the sample was illuminated from the side using a Fiber-Lite MI-152 lamp.
When viewing the internal interface between the fluorocarbon phase and the hydrocarbon phase, the image is distorted due to the curved outer phase. This distortion due to refraction at the droplet’s outer surface needs to be accounted for when determining the location and curvature of the droplet-internal interface. Therefore, we apply the following correction to find the position of an object—in this case a point on the internal interface—within a droplet of refractive index n1 that is located in a medium with refractive index n2: if the object is located at a distance h measured perpendicular to the optical axis, which passes the centre of a sphere of radius R, the height of its image hi is given by the paraxial approximation (see Supplementary Note 3):
This implies that the actual height h of an object in the droplet that appears to have a height hi will be:
To deduce the actual droplet-internal interface location, this correction was applied by first determining the off axis distance hi for each point along the interface in the side view images of the drops using a custom MATLAB algorithm. We then used equation (4) to calculate the real shape of the internal interface by fitting a circle to this corrected curve to determine the interface curvature. The error associated with using the paraxial approximation is discussed in Supplementary Note 3 and Supplementary Figs 4 and 5.
A custom-build microscope was used to reconstruct the light field behind the lenses. For this experiment, the drops were illuminated with a quasi-monochromatic plane wave. This was achieved by imaging the output of an optical fibre with 50 μm core in the back focal plane of an NPL × 20 objective (Leitz Wetzlar, NA=0.45) used as a condenser. A 540 nm bandpass filter with an 80 nm bandwidth was used to create quasi-monochromatic light. The light field behind the droplets was captured by scanning the focal plane in 5 μm steps using a Madcity Labs micro-stage, a × 20 Olympus objective (NA=0.75), a 200 mm focal length achromatic doublet tube lens and an Andor Zyla sCMOS 5.5 Camera. The light field data was analysed using MATLAB and ImageJ. The location and size of the droplets were determined from the images using ImageJ’s measurement tools. The data from the focal scans were then entered into MATLAB to reconstruct the 3D light field behind individual droplet lenses, similar to the approach previously used to measure the light field behind retinal cell nuclei56. After the light field was measured, the droplet lenses were placed in a microscope with horizontal optical axis and imaged from the side. This side view was used to determine the curvature and volume ratio of the drops.
Measuring droplets’ focal length
In order to quantify the image formation characteristics of the droplets, an image of a grid pattern was projected in front of them using a × 60 Olympus water dipping objective (NA=1.0). The droplets acting as lenses projected the object to form a new image, which was then recorded using a × 10 objective (NA=0.3) with a customized microscope setup (Fig. 3a). The distance of the input image x1 to a droplet lens can be controllably varied, and the position of the projected image behind the lens x2 is determined by locating the plane, where the projected image is in focus (Fig. 3b–d). The location of the input and recorded images are related to the focal length by the simple lens relation (see Supplementary Note 2 and Supplementary Fig. 2) where so and si are the distances from the input image to the first principle plane and from the second principle plane to the recorded image, respectively, and is the refractive index contrast between the surrounding media before and after the droplet lens (in our measurement setup m1 was water and m2 was air). The focal length and principle plane locations (p1 and p2) could then be determined by measuring the location of the output image for various input image locations and by using the relation
where x1−p1=si, and x2−p2=so.
Determining the droplets’ PSF and MTF
The droplet lenses’ PSF and MTF provide quantitative measures of the two-point resolution and line pattern contrast limits that can be achieved when the lenses are employed in imaging applications. To get an estimate of the PSF and MTF we expose individual droplets to white light, which originates from an optical fibre with a 50 μm diameter core and is collimated by a spherical lens (f=150 mm). We capture the droplet’s PSF using a custom-build microscope composed of a × 50 Olympus objective (NA=0.5), a Thorlabs tube lens (f=200 mm) and an Allied Vision ProSilica GT3300C camera. We only use the camera’s red channel (maximum quantum efficiency at 620 nm), expecting that the droplets’ resolution would be at least comparable or better for smaller wavelengths. We obtain the MTF by Fourier-transforming the PSF after subtraction of background noise (which is legitimate because we do not expect diffuse scattering from the clear droplet), removal of ‘salt and pepper’ noise (due to hot pixels) using a median filter in a 3 × 3 pixel neighbourhood area, and averaging over angular slices of the imaged Airy disk pattern. The resulting PSF and MTF curve must be seen as a conservative estimate as the recorded PSF still possesses residual blur from the microscope optics.
Using UV light to switch lens morphology
With a light-sensitive surfactant containing an azobenzene moiety, 3-(4-((4-butylphenyl)diazenyl)phenoxy)-N,N,N-trimethylpropan-1-aminium bromide, in the aqueous medium, the fluid lenses can be switched from a transparent Janus state to a scattering double emulsion state, and back, simply by exposure to light in the UV and blue spectral ranges as described previously48. The droplets consisted of a 1:1 volume ratio of (2:1 hexane:heptane) to FC-770 and a 100 μl total volume was used. The outer phase was composed of 600 μl of 0.1 wt% azobenzene surfactant and 80 μl of 2 wt% Zonyl FS-300 in water. A laser-printed photomask transparency displaying a smiley or the MIT logo was placed beneath the droplets in a dish on the stage of an inverted microscope. In the case of the MIT logo, a piece of semi-transparent Scotch table was placed over the ‘i’ to partially block light transmission to the sample and to induce a grey-scaling effect. The sample of liquid lenses, initially in a Janus morphology, was then illuminated with UV light through the photomask (DAPI filter, λ=365 nm) to induce transformation of the droplets in the exposed areas to the double emulsion state. This light-induced reconfiguration of the lens-internal interface can be reversed by exposure to blue light (through a FITC filter, λ=470±20 nm). Gelatin can be added to the outer aqueous phase to reduce the rate of diffusion and prolong image persistency.
In all simulations, the overall droplet shape was assumed to be spherical, which is a valid assumption provided that the interfacial tensions γFH between fluorocarbon and hydrocarbon, γF between fluorocarbon and the aqueous medium, and γH between hydrocarbon and the aqueous medium, satisfy the relations (ref. 44). The internal interfaces were assumed to be spherical, based on the following argument: interfaces between liquids can be considered to be spherical when the ratio of gravitational forces to surface tension forces is small. This ratio is given by the Bond number , where Δρ is the difference in density of the two droplet phases, g the gravitational constant and L the droplet diameter57. For a material system similar to the one used here, such as the hexane-perfluorohexane bi-phase droplets with a diameter of 100 μm, constituent densities of ρHX=0.66 g cm−3 and ρFHX=1.68 g cm−3 and a surface tension γFH=0.4 mN m−1 (ref. 57), the Bond number is around 0.25. While a Bond number of around 0.1 is usually considered to be an upper limit for assuming spherical curvature of a liquid–liquid interface58, images of our complex droplets show that the interface of the droplets obtained can be approximated reasonably well with a spherical fit (inset in Fig. 3e). Deviations are apparent closer to the triple-phase contact line, but these regions do not strongly affect the optical behaviour of the droplet lenses.
FDTD simulations were completed using the open source software package MIT Electromagnetic Equation Propagation59. Double emulsions and Janus droplets of Heptane and FC-770 with a radius of 5 μm in water were illuminated with a 500 nm wavelength monochromatic line light source. Equal volumes of Heptane and FC-770 were simulated, and the overall droplet shape and the shape of the interface were assumed to be spherical, such that equation (1) yields the interface location. A perfectly matched layer was used as the boundary condition on all edges of the cell, and the resolution was 32 units per μm. The simulation was run until a steady state was reached where the intensity no longer varied between time steps.
Ray-tracing was implemented in MATLAB. Each ray was defined by its location, direction, intensity and polarization. The rays were propagated to the drop and were refracted and reflected at each interface of the drop. The direction vector of the refracted ray was determined using a vector version of Snell’s law:
where is the direction of the incident ray, is the surface normal, θi is the angle that the incoming ray makes with the surface normal, and n1 and n2 are the refractive indices before and after the interface (see Supplementary Note 4). The intensity of the refracted and reflected rays was calculated using the Fresnel Equations45.
The ray transfer matrix was calculated numerically using MATLAB. The transfer matrix consisted of the product of transfer matrixes for a ray entering the drop (water to heptane), propagating a distance Rd+l to the interface between heptane and FC-770, being refracted at this interface, propagating the rest of the way through the drop, and being refracted at the outer interface of the drop (FC-770 to water). In order to compare with experiments, refraction through the coverslip after the drop was included in the ray transfer matrix. The locations of the focal points were consistent between the ray transfer matrix and ray-tracing.
The data that support the findings of this study are available from the corresponding author on request.
How to cite this article: Nagelberg, S. et al. Reconfigurable and responsive droplet-based compound micro-lenses. Nat. Commun. 8, 14673 doi: 10.1038/ncomms14673 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Erdmann, L. & Gabriel, K. J. High-resolution digital integral photography by use of a scanning microlens array. Appl. Opt. 40, 5592–5599 (2001).
Martinez-Cuenca, R., Saavedra, G., Martinez-Corral, M. & Javidi, B. Extended depth-of-field 3-D display and visualization by combination of amplitude-modulated microlenses and deconvolution tools. J. Disp. Technol. 1, 321–327 (2005).
Xiao, X., Javidi, B., Martinez-Corral, M. & Stern, A. Advances in three-dimensional integral imaging: sensing, display, and applications [Invited]. Appl. Opt. 52, 546–560 (2013).
Davies, N. A., McCormick, M. & Brewin, M. Design and analysis of an image transfer system using microlens arrays. Opt. Eng. 33, 3624–3633 (1994).
Zeng, X., Smith, C. T., Gould, J. C., Heise, C. P. & Jiang, H. Fiber endoscopes utilizing liquid tunable-focus microlenses actuated through infrared light. J. Microelectromechanical Syst. 20, 583–593 (2011).
Ng, R. et al. Light Field Photography with a Hand-Held Plenoptic Camera Stanford (2005).
Karp, J. H., Tremblay, E. J. & Ford, J. E. Planar micro-optic solar concentrator. Opt. Exp. 18, 1122–1133 (2010).
Hornbeck, L. J. Digital Light Processing for high-brightness high-resolution applications. Proc. SPIE 3013, 27–40 (1997).
Wang, D., Park, S.-Y. & Kang, I.-K. Liquid crystals: emerging materials for use in real-time detection applications. J. Mater. Chem. C 3, 9038–9047 (2015).
Zappe, H. Fundamentals of Micro-Optics Cambridge University Press (2010).
Brenner, K.-H. & Jahns, J. Microoptics: From Technology to Applications Springer (2013).
Solovei, I. et al. Nuclear architecture of rod photoreceptor cells adapts to vision in mammalian evolution. Cell 137, 356–368 (2009).
Kreysing, M., Boyde, L., Guck, J. & Chalut, K. J. Physical insight into light scattering by photoreceptor cell nuclei. Opt. Lett. 35, 2639–2641 (2010).
Werber, A. & Zappe, H. Tunable microfluidic microlenses. Appl. Opt. 44, 3238–3245 (2005).
Murade, C. U., van der Ende, D. & Mugele, F. High speed adaptive liquid microlens array. Opt. Exp. 20, 18180–18187 (2012).
Zeng, X. & Jiang, H. Liquid tunable microlenses based on MEMS techniques. J. Phys. Appl. Phys. 46, 323001 (2013).
Shi, J., Stratton, Z., Lin, S.-C. S., Huang, H. & Huang, T. J. Tunable optofluidic microlens through active pressure control of an air–liquid interface. Microfluid. Nanofluidics 9, 313–318 (2009).
Hawkins, A. R. & Schmidt, H. Handbook of Optofluidics CRC Press (2010).
Ren, H., Xu, S. & Wu, S.-T. Effects of gravity on the shape of liquid droplets. Opt. Commun. 283, 3255–3258 (2010).
Aarts, D. G. A. L., Schmidt, M. & Lekkerkerker, H. N. W. Direct visual observation of thermal capillary waves. Science 304, 847–850 (2004).
Braslau, A. et al. Surface roughness of water measured by X-ray reflectivity. Phys. Rev. Lett. 54, 114–117 (1985).
Dong, L., Agarwal, A. K., Beebe, D. J. & Jiang, H. Adaptive liquid microlenses activated by stimuli-responsive hydrogels. Nature 442, 551–554 (2006).
Zeng, X., Li, C., Zhu, D., Cho, H. J. & Jiang, H. Tunable microlens arrays actuated by various thermo-responsive hydrogel structures. J. Micromech. Microeng. 20, 115035–115046 (2010).
Mishra, K. et al. Optofluidic lens with tunable focal length and asphericity. Sci. Rep. 4, 6378 (2014).
Berge, B. & Peseux, J. Variable focal lens controlled by an external voltage: an application of electrowetting. Eur. Phys. J. E 3, 159–163 (2000).
Krupenkin, T., Yang, S. & Mach, P. Tunable liquid microlens. Appl. Phys. Lett. 82, 316–318 (2003).
Kuiper, S. & Hendriks, B. H. W. Variable-focus liquid lens for miniature cameras. Appl. Phys. Lett. 85, 1128–1130 (2004).
Krogmann, F., Mönch, W. & Zappe, H. A MEMS-based variable micro-lens system. J. Opt. Pure Appl. Opt. 8, S330 (2006).
Grilli, S. et al. Liquid micro-lens array activated by selective electrowetting on lithium niobate substrates. Opt. Exp. 16, 8084–8093 (2008).
Miccio, L. et al. Tunable liquid microlens arrays in electrode-less configuration and their accurate characterization by interference microscopy. Opt. Exp. 17, 2487–2499 (2009).
Li, C. & Jiang, H. Electrowetting-driven variable-focus microlens on flexible surfaces. Appl. Phys. Lett. 100, 231105 (2012).
Ren, H. & Wu, S.-T. Tunable-focus liquid microlens array using dielectrophoretic effect. Opt. Exp. 16, 2646–265 (2008).
Jeong, K.-H., Liu, G. L., Chronis, N. & Lee, L. P. Tunable microdoublet lens array. Opt. Exp. 12, 2494–2500 (2004).
Chen, J., Wang, W., Fang, J. & Varahramyan, K. Variable-focusing microlens with microfluidic chip. J. Micromech. Microeng. 14, 675–680 (2004).
Chronis, N., Liu, G., Jeong, K.-H. & Lee, L. Tunable liquid-filled microlens array integrated with microfluidic network. Opt. Exp. 11, 2370–2378 (2003).
Ren, H., Fox, D., Anderson, P. A., Wu, B. & Wu, S.-T. Tunable-focus liquid lens controlled using a servo motor. Opt. Exp. 14, 8031–8036 (2006).
Zhang, W., Zappe, H. & Seifert, A. Wafer-scale fabricated thermo-pneumatically tunable microlenses. Light Sci. Appl. 3, e145 (2014).
Tang, S. K. Y., Stan, C. A. & Whitesides, G. M. Dynamically reconfigurable liquid-core liquid-cladding lens in a microfluidic channel. Lab. Chip 8, 395–401 (2008).
Dong, L. & Jiang, H. Tunable and movable liquid microlens in situ fabricated within microfluidic channels. Appl. Phys. Lett. 91, 41109 (2007).
Kim, J., Singh, N. & Lyon, L. A. Label-free biosensing with hydrogel microlenses. Angew. Chem. Int. Ed. 45, 1446–1449 (2006).
Kuswandi, B., Nuriman, Huskens, J. & Verboom, W. Optical sensing systems for microfluidic devices: a review. Anal. Chim. Acta 601, 141–155 (2007).
McDonald, C. & McGloin, D. Low-cost optical manipulation using hanging droplets of PDMS. RSC Adv. 5, 55561–55565 (2015).
Li, Z. & Psaltis, D. Optofluidic dye lasers. Microfluid. Nanofluidics 4, 145–158 (2007).
Zarzar, L. D. et al. Dynamically reconfigurable complex emulsions via tunable interfacial tensions. Nature 518, 520–524 (2015).
Born, M. et al. Principles of Optics: Electromagnetic Theory of Propagation, Interference and Diffraction of Light Cambridge University Press (1999).
Gladysz, J. A., Curran, D. P. & Horvath, I. T. Handbook of Fluorous Chemistry John Wiley & Sons (2006).
Guzowski, J., Korczyk, P. M., Jakiela, S. & Garstecki, P. The structure and stability of multiple micro-droplets. Soft Matter 8, 7269–7278 (2012).
Chevallier, E. et al. Pumping-out photo-surfactants from an air–water interface using light. Soft Matter 7, 7866–7874 (2011).
Shang, T., Smith, K. A. & Hatton, T. A. Photoresponsive surfactants exhibiting unusually large, reversible surface tension changes under varying illumination conditions. Langmuir 19, 10764–10773 (2003).
Klajn, R., Wesson, P. J., Bishop, K. J. M. & Grzybowski, B. A. Writing self-erasing images using metastable nanoparticle ‘inks’. Angew. Chem. Int. Ed. 48, 7035–7039 (2009).
Mahimwalla, Z. et al. Azobenzene photomechanics: prospects and potential applications. Polym. Bull. 69, 967–1006 (2012).
Kienzler, M. A. et al. A red-shifted, fast-relaxing azobenzene photoswitch for visible light control of an ionotropic glutamate receptor. J. Am. Chem. Soc. 135, 17683–17686 (2013).
García-Amorós, J. & Velasco, D. Recent advances towards azobenzene-based light-driven real-time information-transmitting materials. Beilstein J. Org. Chem. 8, 1003–1017 (2012).
Baret, J.-C., Kleinschmidt, F., El Harrak, A. & Griffiths, A. D. Kinetic aspects of emulsion stabilization by surfactants: a microfluidic analysis. Langmuir 25, 6088–6093 (2009).
Wang, J., Xiao, X., Yao, G., Stern, A. & Javidi, B. Synthetic aperture integral imaging display with moving array lenslet technique. J. Disp. Technol. 11, 827–833 (2015).
Błaszczak, Z., Kreysing, M. & Guck, J. Direct observation of light focusing by single photoreceptor cell nuclei. Opt. Exp. 22, 11043–11060 (2014).
Kovalchuk, V. I. et al. in Bubble and Drop Interfaces (eds Miller R. & Liggieri, L.) 143–178 (CRC Press, 2011).
McClain, B. R., Yoon, M., Litster, J. D. & Mochrie, S. G. J. Interfacial roughness in a near-critical binary fluid mixture: X-ray reflectivity and near-specular diffuse scattering. Eur. Phys. J. B—Condens. Matter Complex Syst. 10, 45–52 (1999).
Oskooi, A. F. et al. Meep: a flexible free-software package for electromagnetic simulations by the FDTD method. Comput. Phys. Commun. 181, 687–702 (2010).
We thank Frank Grunert for introducing us to the dynamic mathematics software GeoGebra. S.N. and M.K. gratefully acknowledge support by the National Science Foundation through the ‘Designing Materials to Revolutionize and Engineer our Future’ programme (DMREF-1533985). S.N. acknowledges support by NSERC through a Graduate Fellowship. T.M.S. and L.D.Z. acknowledge support of the National Science Foundation through grant DMR-1410718. Mo.K. and K.S. were supported by the Max Planck Society. M.K. thanks the MIT Department of Mechanical Engineering for support.
The authors declare no competing financial interests.
About this article
Cite this article
Nagelberg, S., Zarzar, L., Nicolas, N. et al. Reconfigurable and responsive droplet-based compound micro-lenses. Nat Commun 8, 14673 (2017). https://doi.org/10.1038/ncomms14673
Microsystem Technologies (2021)
Nature Communications (2020)
Light: Science & Applications (2018)
Colloid and Polymer Science (2018)