The Altiplano-Puna Magma Body (APMB) in the Central Andes is the largest imaged magma reservoir on Earth, and is located within the second highest orogenic plateau on Earth, the Altiplano-Puna. Although the APMB is a first-order geologic feature similar to the Sierra Nevada batholith, its role in the surface uplift history of the Central Andes remains uncertain. Here we show that a long-wavelength topographic dome overlies the seismically measured extent of the APMB, and gravity data suggest that the uplift is isostatically compensated. Isostatic modelling of the magmatic contribution to dome growth yields melt volumes comparable to those estimated from tomography, and suggests that the APMB growth rate exceeds the peak Cretaceous magmatic flare-up in the Sierran batholith. Our analysis reveals that magmatic addition may provide a contribution to surface uplift on par with lithospheric removal, and illustrates that surface topography may help constrain the magnitude of pluton-scale melt production.
The Altiplano-Puna Magma Body (APMB) resides within the Altiplano-Puna plateau, a region that is characterized by a higher mean elevation1,2 than the Altiplano to the north, a thickened crust3,4, and a very thin mantle lithosphere4. The thin lithosphere beneath the APVC may result from convective removal5,6,7, a potentially cyclical process8 that has contributed to pulses of rapid surface uplift throughout the history of the Central Andes9. The mantle heat flux associated with lithospheric removal is thought to be responsible for the flare-up of large-volume ignimbrites5,6,10, collectively known as the Altiplano-Puna Volcanic Complex (APVC)11, since ∼11 million years ago (Ma)12. Chemical compositions of the ignimbrites show a roughly equal contribution from crustal and mantle sources11,13, consistent with extensive melting of the upper mantle and crust. Though horizontal shortening alone may not account for the crustal thickness observed in the APVC1, the role of magmatic addition in contributing to the crustal evolution and surface uplift history of the region is often neglected, largely due to the lack of constraints on the volume of magmatic material within the crust1,2. Although the presence of substantial melt beneath the APVC has previously been recognized14, new high-resolution tomography by Ward et al.15 reveals an immense, ∼500,000 km3 zone of partial melt at 10 to 20 km depth beneath the APVC, which substantially changes predictions for both the APMB’s magma production rate and contribution to crustal thickening (and thus surface uplift).
The primary goal of this paper is to test whether melt intrusion into the APMB is actually reflected in the topography of the APVC, and if so, utilize that topographic signature to help place bounds on estimates of mantle melt intrusion into the crust. Our analysis that follows is comprised of the following sections. We first examine anomalies in the long-wavelength topography of the Central Andes, and determine whether or not observed anomalies are structural and therefore recorded in the topography of the underlying basement rocks of the APVC, or are merely the result of ignimbrite deposition on the plateau. We then analyse free-air, Bouguer and isostatic residual gravity anomalies and examine to what degree the topography of the APVC appears isostatically compensated. Pairing topographic data with geochemical constraints on the magmatic system of the APVC, we estimate the volume of the APMB with an isostatic magma production rate model. Finally, we attempt to constrain surface uplift rates of the APVC over its lifetime from 11 Ma using the volcanic record as a proxy for magmatic thickening over million-year long timescales relevant to mantle melt flux16, and place our findings in the context of the known tectonic and geodynamic evolution of the Central Andes between 20o and 25o S.
Through our topographic analysis, we find a tight spatial correlation between a ∼1 km high, long-wavelength topographic dome and the zone of low seismic velocities that is thought to characterize the APMB. The dome appears to be a structural, rather than depositional feature, and gravity data are broadly consistent with Airy isostatic compensation of the topographic anomaly. APMB volumes and magma production rates modelled from its topographic signature compare well with independent estimates from Ambient Noise Tomography15, and our surface uplift rate calculations suggest that magmatic flare-ups can grow topography at rates similar to uplift from lithospheric removal.
Topography of the APMB
To constrain the topographic signal associated with the presence of the APMB (Fig. 1, Supplementary Fig. 1), we measure the long wavelength component of the topography in the Central Andes and find that a high-amplitude, kilometre-scale dome spatially coincides with the estimated bounds of the seismically imaged magma body (Fig. 1b and 2a). Here the seismic bounds of the APMB in Figs 1b are delineated by the 2.9 km s−1 contour from the shear-wave velocity model of Ward et al.15 (Figs 1b and 2d). The dome also correlates with the extent of ignimbrites and concentration of calderas within the APVC (dashed yellow line and black circles in Fig. 1a), as well as a low Bouguer gravity anomaly3 (dashed black line, Fig. 1b).
Calculating the true amplitude of the long-wavelength topographic dome is complicated because the topography is not symmetric on either side of the dome (Fig. 2a). To the north, the mean elevation of the topography lowers as the plateau transitions to the low-relief Altiplano surface. To the south of the APVC lies the Puna plateau, which is characterized largely by high-relief, reverse fault-bounded blocks2. From the profile of the lowpass-filtered topography, we estimate an amplitude range from 900 to 1,400 m. The middle of this range is 1,100–1,200 m, which is approximately equal to the magnitude of structural relief estimated from tilted forearc basin strata for this section of the Central Andes since 11 Ma by Jordan et al.17.
Analysis of basement rock structure
A key question is whether the high topography of the APVC results from structural uplift, or is merely the result of volcanic material deposited on the plateau surface18. We attempt to address this issue both by estimating the mean thickness of ignimbrite deposits along the plateau, and by measuring the elevations of basement rock outcrops in cross-sections through our topographic anomaly.
We estimate the mean thickness of ignimbrite material above the APMB basement using ignimbrite volume estimates of Salisbury et al.12 who report a total dense rock equivalent volume of 12,800 km3. Over the ∼55,000 km2 area of the APVC, roughly 20% consists of caldera basins where much of this material resides. Assuming an average caldera fill depth (defined as the relief from resurgent dome top to caldera moat) of 710 m (ref. 12), we estimate an average thickness of ∼110 m across the non-caldera basins (Supplementary Table 1).
To verify this estimate, we map exposures of basement rocks proximal to our longitudinal and latitudinal cross section lines (Fig. 1b). The basement rocks underlying the late Neogene ignimbrites within the Central Andes are largely composed of the Paleozoic Antofalla terrane, an accreted crustal block consisting of metamorphosed igneous and sedimentary basin rocks associated with the Sunsás orogeny19. Figures 2 and 3 show the mean elevation of the mapped basement outcrops projected onto our cross section lines. Although exposures of basement rock become less common toward the interior of the APVC, the median outcrop elevations roughly track the rise observed in the topographic data sets and appear to define the level of topography just below the volcanoes (red lines, Figs 2a and 3a). Last, evidence for a ∼1 km structural rise is also expressed along the monoclinal folds of the western slope of the Central Andes, where Jordan et al.17 find an increase in structural relief growth of ∼1.1 km from 20o to 24o S since 11 Ma.
Gravity estimates of isostatic equilibrium
The dome is also located within the bounds of a <−300 (ref. 20) to −400 (ref. 3) mGal Bouguer gravity anomaly, which roughly mirrors topography and suggests a thickened21, possibly low density3 crust directly below the dome (Figs 1b and 2b). A high-resolution crustal thickness model does not exist for the lower crust directly beneath the APMB, making direct comparison with crustal thickness difficult. However, it is not clear that a seismic Moho would even be easy to detect within an active magmatic zone, as the dense cumulate layering and mafic melt interaction within the lower crust will produce a complex and thick transition zone of seismic velocities that may obfuscate the Moho boundary22. Regardless, Airy isostatic residual anomalies from the World Gravity Model 2012 (ref. 20) are roughly zero at the APVC (Fig. 3), consistent with isostatically supported topography.
In addition, although there is a nonzero free-air gravity anomaly along the Central Andes (Figs 2 and 3), it is low and does not change markedly from the Altiplano to the Puna (Fig. 2c), which further suggests that the Central Andes as a whole are roughly in isostatic balance. Here the free-air gravity anomaly’s positive value likely arises from the narrow width of the Central Andes (∼200 km) relative to the compensation depth (∼60 km), which may result in significant free-air edge effects within the APVC23. In addition, short wavelength (and thus flexurally supported) topography such as volcanoes appears to contribute to this signal (Fig. 2b).
Modelling melt production from topographic data
The presence of the large-volume APMB implies a substantial input of mantle-derived magma into the crust of the Altiplano Puna Volcanic Complex. As the regional gravity data suggest that the topography of the APVC is in isostatic equilibrium, we can therefore exploit the topographic high above the APMB to learn about the contribution of magmatic thickening to surface uplift. To do so, we invert the topographic profile of the APMB dome (Hb) to solve for the initial load added to the base of the crust (Wi) using a buried load isostatic model (Equation 5; refs 24, 25, Fig. 4; see the ‘Methods’ section for our model description). We then calculate the magmatic contribution to crustal loading using the arc mantle magma production rate model of Ward et al.15 (Fig. 5). This allows us to estimate the volume of the APMB directly from the topography, and provides an independent value to compare with APMB volume estimates from seismic tomography15.
Our isostatic model requires a constant crustal density, so we take an average density of 2,800 kg m−3 for the crustal column and 3,250 kg m−3 for the density of the underlying asthenosphere3. This model therefore precludes examining the effect of crustal thickening on mineralogical (and thus density) changes to lower crust over time like the growth of garnet pyroxenite26,27. Given that the growth of the AMPB is thought to occur after convective removal of dense lithospheric mantle and lower crust8,28,29, neglecting such density changes from metamorphic reactions in this instance seems appropriate. It is worth noting, however, that if magmatic thickening from growth of the APMB has indeed triggered the growth of garnet pyroxenite in the lower crust, then the subdued topography from the dampened isostatic response would lead to an under-prediction of melt volume. Furthermore, here we do not consider the effects of erosion on a magmatically thickened crust27. Precipitation rates drop significantly from the eastern flank of the Central Andes to the plateau surface30, and the high preservation of ignimbrites that blanket the landscape of the Altiplano-Puna plateau suggest minimal erosion over the course of the 11 Myr ignimbrite flare-up. Although erosion rates estimated from the incision of variably-aged volcanic flanks in the APVC are ∼7–9 m Ma−1 (ref. 31), sufficient to erode through the thickness of ignimbrite deposits over the lifespan of the flare-up, these rates are likely significantly less on the flat valley floors where ignimbrite deposits lie. Therefore, we do not consider these processes in our isostatic model.
The arc mantle magma production rate is modelled using a geochemical mass balance, and requires knowledge of both the ratio of crustal to mantle provenance (μ) and the ratio of dense residue to melt mass (η) within the batholith (Equation 4). Isotopic modelling using the chemistry of erupted APVC ignimbrites13, as well as geochemical investigations of batholiths and their lower crustal cumulates32, suggests that both μ and η are approximately ∼1:1 for the APVC2 (see the ‘Methods’ section for full description). Effectively, this implies that the APMB volume should be approximately equal to the magnitude of the modelled isostatic load volume Wi (Fig. 5).
From our isostatic melt production model, we calculate an APMB volume of ∼480,000 km3 (Table 1, Supplementary Fig. 2). Our estimate calculated using the topography above the APMB is close to the seismically determined magma chamber volume of ∼530,000 km3 from the 2.9 km s−1 velocity contour of Ward et al.15; however, our calculation is sensitive to both the prescribed density difference between the crust and mantle asthenosphere, as well as the topographic amplitude of the dome used in our isostatic model, so we include estimates from a range of parameter values in Supplementary Table 2 and Supplementary Fig. 2. Taking into account both the seismic and topographic constraints on mantle melt flux, we calculate a plutonic:volcanic ratio (β) of 32 and an arc mantle magma production rate (ξ) of ∼195 km3 km−1 per million years for the APMB (Equation 5, Table 1; see the ‘Methods’ section for details).
The APMB cross-sectional growth rate (∼200 km3 km−1 per million years) appears to exceed the peak magmatic addition rate of the late Cretaceous magmatic flare-up in the Sierra Nevada batholith (SNB) system. Estimates of magmatic addition rates for the SNB range from 63 km3 km−1 per million years considering the upper 30 km of crust33 to 144 km3 km−1 per million years considering the upper 70 km of crust33. Given that our model considers only the production of mafic cumulates during batholith growth and does not consider partial melting of the lower crust and restite production directly (which likely contributes to the higher magmatic addition rate for the 70 km depth value), a more appropriate comparison for batholith growth between the APMB and SNB is the 30 km depth value of 63 km3 km−1 per million years. This implies that the APMB flare-up is outpacing the peak SNB flare-up by over a factor of two, and is closer to the magmatic addition rates associated with intra-oceanic volcanic arcs and spreading ridges34. Our topographically constrained estimate of β=32 for the plutonic:volcanic ratio of the APMB, however, is approximately equal to the geochemical estimates of β=30 for the Sierran batholith33. Although the sill-like radial geometry of the APMB differs from the elongate geometry of the Sierran batholith, magmatism during the peak APVC flare-up focused within a relatively narrow NNW-SSE zone akin to most arc-related batholiths35,36. Furthermore, the APVC is only one component of a much more extensive ignimbrite province that spans the Central Andean arc and therefore may be considered analogously to the SNB37,38.
Studies of large silicic magma systems like the APVC show evidence for substantial thermal35, rheological10 and mineralogical22 modification of the crustal column arising from melt generation. These changes can potentially have profound effects on the rates and style of tectonics in the growth of a continental arc. For example, Victor et al.39 show that the timespan of E-W shortening along the west Altiplano fault system at the outer western fringes of the Andean slope coincides with the occurrence of ignimbrite volcanism across the span of the Central Andes, and argue that thermal weakening of the crust from intense magmatism should promote increased shortening rates (for example, ref. 10). Farther east along the Western Andean Slope, the onset of long-wavelength monoclinal folding at 10 Ma (ref. 17) coincides with the onset of the APVC ignimbrite flare-up, and an excess structural relief of 1.1 km is seen in tilted forearc basin strata at these latitudes17. Large-scale viscous warping of the plateau flank is consistent with deformation of thermally weakened crust, and both modelling10 and myriad observational data40,41,42 suggest that viscous processes are likely occurring throughout the crustal column of the APVC.
The ∼1 km of surface uplift gained over the 11 million years of magmatic addition represents approximately one-fifth of the total modern-day elevation of the Altiplano-Puna, with the remainder of surface uplift being accomplished primarily through crustal shortening1,2 and lithospheric removal5. Given the volcanological evidence for episodic magmatism throughout the APVC flare-up35, it is likely that surface uplift from magmatic addition was non-uniform over time. As the peak ∼5 million year flare-up timescale potentially records the time variation of mantle power input into the crust16, we use the record of volcanic volume estimates12 as a proxy for plutonic magmatic flux and estimate isostatic uplift rates over the peak volcanic pulse of the APVC (Fig. 6). Estimated surface uplift velocity over the flare-up is approximately 0.2 mm per year, approaching the 0.4 mm per year rates associated with lithospheric removal in the southern Altiplano from 16 to 9 Ma (refs 9, 43).
Although beyond the scope of this study, it may be possible to look for evidence of possible feedbacks between magmatically driven surface uplift and erosion in the APVC by using the variably aged ignimbrites as markers to measure changes in erosion rates since 11 Ma. To the extent that river incision rate is proportional to channel slope44, one may be able to estimate an expected change in erosion rate over time by calculating a baseline change in channel slope. An elevation gain of 1.2 km over the 230 km half-width of the APMB dome yields a total change in long-wavelength surface slope of 0.005. Near Uturuncu volcano on the northern flanks of the long-wavelength dome in southern Bolivia, the slopes of rivers are presently ∼0.01 (ref. 45), so the change in slope from magmatic tilting could potentially result in a doubling of erosion rate (assuming a linear scaling of erosion rates with slope44). Averaged over the 5 million year peak magmatic flare-up of the APVC, this would correspond to a slope change of ∼0.001 (0.1%) per million years. This very slow forcing may prove difficult to detect in the geomorphic or sedimentary record, however, and is further complicated by the fact that erosion rates are expected to be highly heterogeneous as rivers in the APVC are still transiently adjusting to the emplacement of ignimbrites and volcanoes on the surface45,46.
In our modelling, we have also neglected to consider the feedbacks between magmatically driven surface uplift on surface weathering, erosion, and climate (for example, ref. 27). For example, the work of Lee et al.27 suggests that enhanced CO2 output from flare-ups of continental arc magmatism may contribute to greenhouse conditions, and the subsequent weathering and increased erosion of remnant arc high topography may lead to icehouse conditions over the 50 million years-timescale oscillations in Earth’s climate47. In this instance, a change in magmatic flux that drives crustal thickening may be an important external forcing on climate and erosion. However, in the case of the dry Central Andes, the climate may also play a potentially important role as an external driver in the creation of a magmatic flare-up. In continental cordilleran arcs, ignimbrite volcanism often occurs within tectonically thickened and thermally softened crust38. The Central Andean ignimbrites are located in areas of high elevation and crustal thickness, and where precipitation is the lowest along the Andes30. The low precipitation arising from latitudinal variability in global circulation patterns along the Andes may cause a significant decrease in orogen-scale erosion rates, which can lead to crustal thickening and high elevations both from an increased change in storage in the mass balance of an orogenic wedge48, as well as through starving the subduction zone trench of sediment and thus increasing the friction on the plate interface to levels that can support high topography49. It is therefore conceivable that climate itself may also be a factor in determining where along the arc flare-ups can occur.
We present a schematic cartoon illustrating our conceptual model for the growth of topography above the APMB since 10 Ma (Fig. 7), which builds off the models of Kay and Coira513 and Beck et al.7. Beginning with the westward retreating delamination of a weak mantle lithosphere and dense lower crust after an increase in the dip of the subducting slab at 16 Ma (refs 5, 7), hot (low density) asthenosphere flows under the previously thickened orogenic crust causing uplift from the gain in gravitational potential energy50 (Fig. 7a). Decompression melting of the expanded mantle wedge and elevated temperatures at the base of the crust facilitate crustal melting and the addition of mantle-derived melts to the crust5 (Fig. 4b), causing an additional Airy isostatic response (Fig. 7c).
Thus, in light of recent seismic constraints on the volume of partial melt in the mid-crust15, we argue that magmatic thickening of the crust represents a significant component of surface uplift in the APVC since ∼11 Ma. That the topographic response to building a batholith can be of similar magnitude to surface uplift from removal of the mantle lithosphere26,27 has implications both for interpreting the paleo-elevation history of the Central Andes as well as for geodynamical modellers seeking to understand the processes responsible for orogenesis and pluton growth in arc settings.
To examine the surface topographic signal associated with the growth of the APMB, we utilize both the long wavelength topography and Paleozoic basement outcrop elevations generated from a 90 m SRTM digital elevation model. To look at the long wavelength component of the topography in our study area, we first downsample the SRTM data to a 1 km grid size, then take the two-dimensional Fourier transform of the data using Matlab’s built in fft2 command. We then multiply the transformed data set by a lowpass filter with a cutoff wavelength of 175 km, and finally take the inverse transform of the filtered data to recover the long-wavelength topography in xy space.
The basement rock exposures that dot the surface of the APVC consist of Paleozoic basement rock associated with the Antofalla terrane19. The folded and tilted strata associated with surface exposures of the Antofalla terrane near the APMB contrast markedly with the overlying deposits of volcanic rock, making their identification relatively straightforward in satellite imagery. We thus map exposures of this basement along the APMB using high-resolution satellite imagery in Google Earth, and extract their surface elevations using 90 m SRTM topographic data within ArcGIS. To visualize the data, we plot the outcrop centroid and its median elevation on Figs 2a and 3a.
Isostatic modelling of melt contribution
We use the long-wavelength topographic anomaly above the APMB to model the isostatic load at depth using a buried load isostatic model24,25. The conceptual model underlying the mathematical one assumes that the crust here is thickening from the addition of material at its base. In the case of our study, we assume that the crust is being added by mantle-derived melt as upwelling warm asthenosphere replaces the lithosphere that was removed through delamination7. We can therefore model the original contribution to crustal thickening from the accumulation of mantle-derived melt as a convolution of the topographic load profile and the isostatic response function, which is more simply solved through multiplication in frequency space:
Here k corresponds to the wavenumber, Hb(k) is the Fourier transform of the topographic response profile, Wi(k) is the Fourier transform of the buried load profile, ρc is the density of the crust, Δρ=ρm−ρc, and is the isostatic response function for loading at the base of the continental crust25, defined as
D is the flexural rigidity of the crust:
where E is the Young’s modulus, Te is the effective elastic thickness of the crust and ν is Poisson’s ratio (0.25). The parameters used in our calculations are found in Supplementary Table 2. We then take the inverse transform of Wi(k) to find the initial buried load profile Wi.
To mitigate the extreme sensitivity of the calculation to high-frequency noise, and isolate the component of long wavelength topography associated with the APMB, we approximate the long-wavelength topographic response profile Hb in one dimension as a Gaussian curve with an amplitude of ∼1,200 m and a full-width at half-maximum of ∼232 km (Fig. 4). This curve fits the long-wavelength topography well (Fig. 4); however, we model the isostatic load Wi for a range of dome amplitudes (Table 1). Solving Equation 1 using a dome amplitude of 1,200 m yields a buried load profile extending to about 9 km depth at its maximum (Fig. 4). To estimate the root volume from the one-dimensional profile Wi, we assume radial symmetry of the load and calculate the volume Wiv numerically using trapezoidal integration.
We can relate our modelled isostatic root volume to mantle-derived melt volume utilizing an arc mantle production rate model15,33. As shown in Ward et al.15 (their Supplementary Material), mantle-derived melt flux can be related to APMB volume via the following formulation:
Here, ξ is the cross-sectional arc mantle magma production rate (km3 km−1 per million years), α is the volume of volcanic material, β is the plutonic:volcanic ratio, η is the ratio of dense residue mass to melt mass, μ is the ratio of crust to mantle melt provenance, λ is the arc-parallel length and τ is the time interval over which melt accumulation has occurred. As both the ratio of residue mass to melt mass (η) and crust to mantle provenance (μ) are thought to be near 1:1 (ref. 13), the volume of mantle-derived melt calculated from the model should be equal to the seismically imaged volume of the magma chamber. This value is equivalent to the ‘volume addition rate per arc length’ as described by Paterson and Ducea33.
To solve for the volume of the APMB, we relate our initial buried load isostatic volume Wiv, to the cross-sectional growth of crust from magmatic thickening, ξ, by the following relationship:
Plugging Equation 5 into Equation 4, and setting η and μ equal to 1:1 as described above, allows us to calculate β directly from topography and the volume of volcanic material α.
Here α is approximately 15,000 km3 and represents the total volcanic volume (ignimbrites plus volcanic edifices). The APMB volume (Vapmb) then is simply the volume of the total buried load Wiv minus the volcanic volume α. Computer code for this analysis is available upon request to the corresponding author.
Uplift history from the volcanic record
We estimate the time history of surface uplift from magmatic thickening of the APVC crust by utilizing measurements of erupted ignimbrite volume (dense rock equivalent) since 11 Ma (Table 6 in Salisbury et al.12). Using our topographic estimate of β=32, we convert ignimbrite volume to plutonic volume and divide the plutonic volume by the approximate magmatic footprint of the APMB (55,000 km2) to get a mean crustal thickness contribution. We convert the change in thickness to surface uplift assuming Airy isostatic compensation, and take the local gradient in uplift over time to estimate surface uplift rate. As our buried load model shows, the large wavelength of the APMB does not feel the effects of the flexural rigidity of the upper crust and thus an Airy approximation for our simplified uplift model is appropriate. Because mechanical processes in the crust will filter the power input from the mantle16, there is likely not a linear relationship between mantle melt production and surface eruption rates. However, the ∼5 million years timescale that defines the peak APVC flare-up12 may record the time variability of melt production16, so we average our uplift calculations over this range of changes in volcanic volume.
All the data for this manuscript are available upon request to the corresponding authors.
How to cite this article: Perkins, J. P. et al. Surface uplift in the Central Andes driven by growth of the Altiplano Puna Magma Body. Nat. Commun. 7, 13185 doi: 10.1038/ncomms13185 (2016).
Allmendinger, W., Jordan, E., Kay, M. & Isacks, B. L. The evolution of the Altiplano-Puna plateau of the Central Andes. Annu. Rev. Earth Planet. Sci. 25, 139–174 (1997).
Isacks, B. L. Uplift of the Central Andean Plateau and bending of the Bolivian Orocline. J. Geophys. Res. 93, 3211–3231 (1988).
Prezzi, C., Götze, H.-J. & Schmidt, S. 3D density model of the Central Andes. Phys. Earth Planet. In. 177, 217–234 (2009).
Tassara, A. & Echaurren, A. Anatomy of the Andean subduction zone: three-dimensional density model upgraded and compared against global-scale models. Geophys. J. Int. 189, 161–168 (2012).
Kay, S. & Coira, B. L. Shallowing and steepening subduction zones, continental lithospheric loss, magmatism, and crustal flow under the Central Andean Altiplano-Puna. Geol. Soc. Am. Mem. 204, 229–259 (2009).
de Silva, S. L. et al. Large ignimbrite eruptions and volcano-tectonic depressions in the Central Andes: a thermomechanical perspective. Geol. Soc. Spec. Publ. 269, 47–63 (2006).
Beck, S. L., Zandt, G., Ward, K. M. & Scire, A. Multiple styles and scales of lithospheric foundering beneath the Puna Plateau, central Andes. Geol. Soc. Am. Mem. 212, 43–60 (2015).
DeCelles, P. G., Ducea, M. N., Kapp, P. & Zandt, G. Cyclicity in Cordilleran orogenic systems. Nat. Geosci. 2, 251 (2009).
Garzione, C. N. et al. Clumped isotope evidence for diachronous surface cooling of the Altiplano and pulsed surface uplift of the Central Andes. Earth Planet Sci. Lett. 393, 173–181 (2014).
Babeyko, Y. A., Sobolev, S. V., Trumbull, R. B., Oncken, O. & Lavier, L. L. Numerical models of crustal scale convection and partial melting beneath the Altiplano-Puna plateau. Earth Planet Sci. Lett. 199, 373–388 (2002).
de Silva, S. L. Altiplano-Puna volcanic complex of the central Andes. Geology 17, 1102–1106 (1989).
Salisbury, M. et al. 40Ar/39Ar chronostratigraphy of Altiplano-Puna volcanic complex ignimbrites reveals the development of a major magmatic province. Geol. Soc. Am. Bull 123, 821–840 (2011).
Kay, S., Coira, B. L., Caffe, P. J. & Chen, C.-H. Regional chemical diversity, crustal and mantle sources and evolution of central Andean Puna plateau ignimbrites. J. Volcanol. Geoth. Res 198, 81–111 (2010).
Zandt, G., Leidig, M., Chmielowski, J. & Baumont, D. Seismic detection and characterization of the Altiplano-Puna magma body, central Andes. Pure Appl. Geophys. 160, 789–807 (2003).
Ward, K., Zandt, G., Beck, S., Christensen, D. & McFarlin, H. Seismic imaging of the magmatic underpinnings beneath the Altiplano-Puna volcanic complex from the joint inversion of surface wave dispersion and receiver functions. Earth Planet Sci. Lett. 404, 4353 (2014).
de Silva, S. L., Riggs, N. & Barth, A. Quickening the pulse: fractal tempos in Continental Arc magmatism. Elements 11, 113–118 (2015).
Jordan, T. E. et al. Uplift of the Altiplano-Puna plateau: a view from the west. Tectonics 29, TC5007 (2010).
Quade, J. et al. The growth of the central Andes, 22 °S–26 °S. Geol. Soc. Am. Mem 212, 277–308 (2014).
Ramos, V. The Basement of the Central Andes: the Arequipa and Related Terranes. Annu. Rev. Earth Planet. Sci. 36, 289–324 (2008).
Bonvalot, S. et al. World Gravity Map BGI-CGMW-CNES-IRD (2012).
Beck, S. et al. Crustal-thickness variations in the central Andes. Geology 24, 407–410 (1996).
Lipman, P. W. & Bachmann, O. Ignimbrites to batholiths: integrating perspectives from geological, geophysical, and geochronological data. Geosphere 11, 705–743 (2015).
Fowler, C. M. R. The Solid Earth: An introduction to Global Geophysics Cambridge Univ. Press (2004).
Forsyth, D. W. Subsurface loading and estimates of the flexural rigidity of continental lithosphere. J. Geophys. Res. 90, 12623–12632 (1985).
Watts, A. B. Isostasy and Flexure of the Lithosphere 459(Cambridge Univ. Press (2001).
Pelletier, J., DeCelles, P. & Zandt, G. Relationships among climate, erosion, topography, and delamination in the Andes: a numerical modeling investigation. Geology 38, 259–262 (2010).
Lee, C.-T., Thurner, S., Paterson, S. & Cao, W. The rise and fall of continental arcs: interplays between magmatism, uplift, weathering, and climate. Earth Planet. Sci. Lett. 425, 105–119 (2015).
Kay, R. W. & Kay, S. M. Delamination and delamination magmatism. Tectonophysics 219, 177–189 (1993).
Kay, S. M., Coira, B. & Viramonte, J. Young mafic back-arc volcanic rocks as indicators of continental lithospheric delamination beneath the Argentine Puna Plateau, Central Andes. J. Geophys. Res. 99, 24,323–24,339 (1994).
Bookhagen, B. & Strecker, M. R. Orographic barriers, high‐resolution TRMM rainfall, and relief variations along the eastern Andes. Geophys. Res. Lett. 35, L06403 (2008).
Karátson, D., Telbisz, T. & Wörner, G. Erosion rates and erosion patterns of Neogene to Quaternary stratovolcanoes in the Western Cordillera of the Central Andes: an SRTM DEM-based analysis. Geomorphology 139–140, 122–135 (2012).
Ducea, M. N. & Barton, M. D. Igniting flare-up events in Cordilleran arcs. Geology 35, 1047–1050 (2007).
Paterson, S. R. & Ducea, M. N. Arc magmatic tempos: gathering the evidence. Elements 11, 91–98 (2015).
Jicha, B. & Jagoutz, O. Magma production rates for intraoceanic arcs. Elements 11, 105–111 (2015).
de Silva, S. L. & Gosnold, W. D. Episodic construction of batholiths: insights from the spatiotemporal development of an ignimbrite flare-up. J. Volcanol. Geotherm. Res. 167, 320–335 (2007).
Kern, J. M. et al. Geochronological imaging of an episodically constructed subvolcanic batholith: U-Pb in zircon chronochemistry of the Altiplano-Puna Volcanic Complex of the Central Andes. Geosphere doi: 10.1130/GES01258.1 (2016).
Hamilton, W. in Bulletin of Proceedings of the Andesite Conference Vol. 65, ed. McBirney A. R. 175–184Oregon Dept. Geology and Mineral Industries Bull. (1969).
Best, M. G., Christiansen, E. H., de Silva, S. L. & Lipman, P. W. Slab-rollback ignimbrite flareups in the southern Great Basin and other Cenozoic American arcs: a distinct style of arc volcanism. Geosphere 12, 1097–1135 (2016).
Victor, P., Oncken, O. & Glodny, J. Uplift of the western Altiplano plateau: Evidence from the Precordillera between 20o and 21 °S (northern Chile). Tectonics 23, TC4004 (2004).
Fialko, Y. & Pearse, J. Sombrero uplift above the Altiplano-Puna Magma Body: evidence of a ballooning mid-crustal diaper. Science 338, 250–252 (2012).
del Potro, R., Díez, M., Blundy, J., Camacho, A. G. & Gottsmann, J. Diapiric ascent of silicic magma beneath the Bolivian Altiplano. Geophys. Res. Lett. 40, 2044–2048 (2013).
Comeau, M. J., Unsworth, M. J., Ticona, F. & Sunagua, M. Magnetotelluric images of magma distribution beneath Volcán Uturuncu, Bolivia: implications for magma dynamics. Geology 43, 243–246 ((2015).
Ghosh, P., Garzione, C. N. & Eiler, J. M. Rapid uplift of the altiplano revealed through 13C-18O bonds in paleosol carbonates. Science 311, 511–515 (2006).
Howard, A. D. A detachment-limited model of drainage basin evolution. Water Resour. Res 30, 2261–2285 (1994).
Perkins, J. P., Finnegan, N. J., Henderson, S. T. & Rittenour, T. M. Topographic constraints on magma accumulation below the actively uplifting Uturuncu and Lazufre volcanic centers in the Central Andes. Geosphere 12, 1078–1096 (2016).
Perkins, J. P., Finnegan, N. J. & de Silva, S. L. Amplification of bedrock canyon incision by wind. Nat. Geosci. 8, 305–310 (2015).
Zachos, J. C., Dickens, G. R. & Zeebe, R. E. An early Cenozoic perspective on greenhouse warming and carbon-cycle dynamics. Nature 451, 279–283 (2008).
Montgomery, D. R., Balco, G. & Willett, S. D. Climate, tectonics, and the morphology of the Andes. Geology 29, 579–582 (2001).
Lamb, S. & Davis, P. Cenozoic climate change as a possible cause for the rise of the Andes. Nature 425, 792–797 (2003).
Molnar, P. & Stock, J. M. Slowing of India’s convergence with Eurasia since 20 Ma and its implications for Tibetan mantle dynamics. Tectonics 28, TC3001 (2009).
Conversations with Emily Brodsky, Francis Nimmo and Sam Johnstone helped improve the quality of this manuscript. This work was financially supported by National Science Foundation grants EAR 0908850 (N.J.F) and EAR 1415914 (S.L.B., G.Z.).
The authors declare no competing financial interests.
About this article
Cite this article
Perkins, J., Ward, K., de Silva, S. et al. Surface uplift in the Central Andes driven by growth of the Altiplano Puna Magma Body. Nat Commun 7, 13185 (2016). https://doi.org/10.1038/ncomms13185
Late Cretaceous magmatism in the NW Lhasa Terrane, southern Tibet: Implications for crustal thickening and initial surface uplift
GSA Bulletin (2020)
The great escape: Petrogenesis of low-silica volcanism of Pliocene to Quaternary age associated with the Altiplano-Puna Volcanic Complex of northern Chile (21°10′-22°50′S)
Geomorphology and spatial distribution of monogenetic volcanoes in the southern Puna Plateau (NW Argentina)
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences (2019)