Magnetic field can penetrate into type II superconductors in the form of Abrikosov vortices, which are magnetic flux tubes surrounded by circulating supercurrents often trapped at defects referred to as pinning sites. Although the average properties of the vortex matter in superconductors can be tuned with magnetic fields, temperature or electric currents, handling of individual Abrikosov vortices remains challenging and has been demonstrated only with sophisticated scanning local probe microscopies. Here we introduce a far-field optical method based on local heating of the superconductor with a focused laser beam to realize a fast and precise manipulation of individual vortices, in the same way as with optical tweezers. This simple approach provides the perfect basis for sculpting the magnetic flux profile in superconducting devices like a vortex lens or a vortex cleaner, without resorting to static pinning or ratchet effects.
Early experiments showed that the average properties of the vortex matter can be tuned with magnetic fields1, temperature or electric currents2. A first step towards the controlled manipulation of vortices has been achieved by moving magnetic Bloch walls of a ferrite garnet film used to image single vortex locations3. Yet, handling of individual vortices has been performed only with magnetic force4,5, superconducting quantum interference device6,7,8 or strain-induced9 scanning local probe microscopies. Since these techniques are slow and heavy to implement in cryogenic environments, new approaches to provide a large-scale and versatile basis for sculpting the magnetic flux profile in superconductor devices are required. Here we introduce a far-field optical method based on local heating of the superconductor with a focused laser beam to realize a fast and precise manipulation of individual Abrikosov vortices. Since a single vortex can induce a Josephson phase shift10,11, our method paves the way to fast optical drive of Josephson junctions, notably in superconducting elementary circuits with potential large parallelization of operations.
Although the possibility to induce a global vortex flow by thermal gradients in superconductors (SCs) was experimentally demonstrated almost 50 years ago12,13, thermal manipulation of individual Abrikosov vortices has not yet been achieved. The early observations of vortex flows in weak thermal gradients were interpreted on the basis that vortices behave as entropy-carrying particles, which obey general thermal diffusion laws and therefore are in search of colder places in the superconductor. However, theoretical investigations revisiting the problem of entropy transport in superconductors show that the vortex superconducting current does not carry entropy14. In the limit of a London magnetic penetration depth λ much larger than the coherence length ξ, the vortex core is very small and its contribution to the energy can be neglected15. The free energy per unit length of an isolated vortex is thus proportional to the density of Cooper pairs and is given by
where Φ0 is the flux quantum and μ0 the vacuum permeability. It linearly grows as Tc−T when reducing the temperature T down from the superconducting critical temperature Tc (refs 15, 16). As a consequence, a temperature gradient in the superconductor will generate a thermal force per vortex unit length given by
where λ0 and ξ0 are the values of λ and ξ at zero temperature. This force will therefore drive vortices towards higher temperature regions.
In this work, we show that a tightly focused laser beam inducing a strong thermal gradient can be used to manipulate single flux quanta. The laser locally heats the superconductor and creates a micron-sized hotspot with a temperature rise in the Kelvin range, while keeping the temperature below Tc. The large thermal gradient can easily be tuned with laser power, so that the generated thermal force overcomes the pinning potential and induces a vortex motion towards the laser focus. Therefore, the laser beam acts as optical tweezers that move single flux quanta to any new desired positions in the superconductor.
The experimental set-up used for single vortex optical manipulation and magneto-optical imaging is depicted in Fig. 1a. A 90 nm-thick niobium film was cooled below its critical temperature Tc=8.6 K under a weak external magnetic field Hext applied perpendicular to the film, to set the SC in the mixed state. Figure 1b is a magneto-optical image of a spontaneous vortex distribution obtained at T=4.6 K and for Hext=0.024 Oe. The vortices are located at pinning sites that are randomly distributed in the SC sample. Vortex after vortex, they are then optically dragged and repositioned into an artificial pattern forming the letters A V for Abrikosov vortices, as shown in Fig. 1c (see also the vortex rearrangement movie in the Supplementary Movie 1).
Because they dissipate energy and generate internal noise, vortices constitute a serious obstacle limiting the operation of numerous superconducting devices17. The most desirable method to overcome this difficulty would be to remove the vortices from the bulk of the superconductor without the need for material structuration or the incorporation of impurities and defects18,19. To this purpose, we show in Fig. 1d,e how a vortex-free area is produced in a niobium film by simply scanning a focused laser beam, which picks up the vortices in its path, drags and drops them in a bordering area of the superconductor, like a vortex broom. Actually, because of their mutual repulsion, all vortices cannot be piled up in the same optical spot. This explains the comet-like shape of the vortex distribution in the region along the laser path, with a maximal vortex density at the final position of the laser spot (see the vortex-cleaning movie in Supplementary Movie 2).
To perform an efficient single vortex manipulation, it is crucial to choose a laser power low enough to keep the local temperature below Tc and high enough so that the thermal force overcomes the pinning potentials. To determine the absorbed power needed to untrap all single vortices in a selected region of the SC at temperature T, we sequentially position the laser spot at a micrometric distance (∼1 μm) from each vortex (crosses in Fig. 2a) and count the number of untrapped vortices for various laser powers. As displayed in Fig. 2b, the fraction of untrapped vortices strongly depends on the laser power and the base temperature, reflecting a large distribution of pinning potentials in the sample. Most notably, we demonstrate in Fig. 2c that 100% of the vortices in the selected region can be dragged out of their pinning sites. Moreover, we checked that the superconductivity is not destroyed at the laser powers used for the manipulation. For this, we have compared the magneto-optical images of vortices under laser illumination with that of vortices at different SC temperatures without laser (Supplementary Figs 1 and 2, and Supplementary Note 1). Since the vortex image profile (width and contrast) is slightly affected by the laser, we conclude that the local temperature remains well below Tc when performing the vortex manipulation.
This approach allows a straightforward estimation of the pinning force of each vortex at any temperature. From Fig. 2b, we can estimate the pinning force of the most strongly bound vortices in the selected SC region at various temperatures. At T=4.6 K for instance, the thermal force overcomes all pinning forces for an absorbed power of 13 μW, corresponding to a temperature gradient at the vortex position of ∼1.4 K μm−1 (Supplementary Fig. 3 and Supplementary Note 2). Using expression (2) of the thermal force and taking λ0=90 nm and λ0/ξ0=9 relevant to our niobium film, we deduce a maximal pinning force per vortex unit length Fp∼14 pN μm−1. This order of magnitude estimate is in accordance with previous determinations based on critical current measurements on similar samples20,21,22,23. Finally, the temperature dependence of the pinning force of a strongly bound vortex is displayed in Fig. 2d. It is well reproduced with the empirical power law Fp∝(1−T/Tc)γ with γ=3.4, in agreement with previous ensemble measurements on vortices in niobium films20,24.
Shaping magnetic flux in a superconductor with light
The extreme simplicity of optical generation of strong local thermal gradients in SCs enables to tailor normal metal regions in the SC, and study the magnetic flux penetration close to their boundaries. For instance, starting from a spontaneous spatial distribution of vortices, a strong illumination of the Nb film with a focused laser produces a central region of radius R0, where the temperature exceeds Tc. This normal (N) region thus traps a magnetic flux Φ∼πHext originating from the destroyed vortices (Fig. 3a). The averaged radial profile of the magnetic field during laser illumination is presented in Fig. 3b. It recalls that of a supercurrent loop of radius R0 surrounding the N region (dashed blue curve in Fig. 3b), which adds to the average magnetic field in the superconductor (defined as the total flux through the SC divided by the SC surface). After switching the laser off, the local temperature starts relaxing to its base value, inducing shrinkage of the N region, where T remains larger than Tc. The magnetic flux remains trapped within the N region as a result of the geometrical barrier25,26 that prevents the vortices from entering the superconducting region of the sample. To support this picture, we solve the heat equation to calculate the time evolution of the sample temperature profile at early times after the laser switch-off (red curves of Fig. 3e). For each profile, the solution of the stationary Ginzburg–Landau equation gives the corresponding spatial distribution of the normalized order parameter (blue curves) and therefore the size of the shrinking N region (Supplementary Fig. 4 and Supplementary Note 3). Because of flux conservation, the trapped magnetic field increases with time (green levels) until it reaches the geometrical barrier critical field (penetration field Hp) for a radius . When the radius of the N region becomes smaller than R*, the geometrical barrier vanishes and the vortices penetrate the SC region where they get trapped at the nearest pinning sites. This behaviour explains the final distribution of flux quanta in Fig. 3c, characterized by a dense vortex region with radius R* (where the individual vortices are not optically resolved) belt by a vortex-free SC region with an external radius R0. Following the Bean critical state model16,27, the vortex distribution is determined by the balance between the pinning force and the Lorentz driving force jcΦ0, jc being the critical current density. This explains why the radial profile of the magnetic field presented in Fig. 3d is almost linear in the vortex cluster (Supplementary Note 4). Interestingly, the experimental dependence of the ratio R*/R0 on the external magnetic field Hext plotted in Fig. 3f is very well described by the theory of the geometrical barrier (Supplementary Note 5 for details).
The performed experiments unveil new aspects of the interaction between laser radiation and the vortex matter. Since the concept of attractive thermal force exerted on an isolated vortex is new, further theoretical investigations are required to gain a deeper understanding of all contributions of this force, including the contribution of the vortex core and of the supercurrents around the core.
By choosing the appropriate laser parameters, we showed that one can perform a safe and efficient manipulation of single vortices, with a 100% rate of success. In practice, the distance over which a vortex can be dragged is only limited by the field of view of the microscope objective, which is of the order of a millimetre in our case. We realized various regimes of vortex manipulation, from the precise and rapid positioning of individual vortices to the generation of tight vortex bunches.
In the present work we implemented a proof-of-principle vortex broom and aimed at recording the vortex broom at work, using our magneto-optical imaging system. In Supplemental Movie 2, we chose a low manipulation speed to image the movements of vortices with a sufficient contrast. The complete cleaning displayed in this movie took 420 s, corresponding to an average vortex speed of 10 μm s−1. Actually, the laser scanning system, including galvanometric mirrors and the driving electronics, limits the cleaning speed in our set-up. An area of 70 × 70 μm could be cleaned in 350 ms, corresponding to ∼6 mm s−1 for the vortex drive speed. Faster scanners would increase the vortex driving speed, up to a maximal speed which should be given by the ratio of the hotspot size (∼1 μm) to the thermal response time of the sample (∼1 ns), of the order of 1 km s−1.
We foresee that the versatility of our optical method of vortex manipulation will fuel fundamental investigations of the vortex matter and vortex dynamics in Abrikosov lattices. Moreover, the interplay between photons and single flux quanta should open up novel research directions in quantum computation based on braiding and entanglement of vortices, Josephson switches of electric current28, or optically controlled elements of Rapid Single Flux Quantum logics29—a new research field that could be called optofluxonics.
Magneto-optical imaging of vortices in a niobium film
Magneto-optical imaging of individual vortices is based on the Faraday rotation of light polarization in a magneto-optical indicator placed onto the superconductor, in a crossed-polarizer beam path configuration. The superconductor is a niobium film of thickness 90 nm grown by magnetron sputtering on a silicon substrate (thickness 500 μm). The indicator is a 2.5 μm-thick Bi:LuIG garnet of composition Lu3−xBixFe5−zGazO12 with x∼0.9 and z∼1.0, with in-plane uniform saturation magnetization 50 G, which was grown by liquid phase epitaxy on a (100) oriented paramagnetic gadolinium–gallium-garnet Gd3Ga5O12 substrate. This garnet has a high Verdet constant of ∼0.06° μm−1 mT−1 at light wavelengths around 560 nm.
The sample was mounted on a piezo scanner and inserted together with an aspheric lens (numerical aperture 0.49) in a closed-cycle helium cryostat. It was then submitted to a perpendicular external magnetic field Hext and cooled below the critical temperature Tc=8.6 K to set the niobium film in the SC mixed state.
The magneto-optical contrast strongly depends on the extinction ratio of the ensemble polarizer-lens-crossed analyser30,31. An extinction ratio ∼10−3 at cryogenic temperatures could be achieved. To enhance the contrast of magneto-optical imaging, a background subtraction procedure was used to suppress the contribution of defects at the sample surface and non-uniformity of the sample illumination. An image taken at T>Tc under external magnetic field was subtracted from all raw images recorded at T<Tc under the same applied magnetic field.
Creating artificial vortex patterns
Software was developed to locate all vortices of a selected area in a magneto-optical image and to relocate them to the new desired positions. An important point is to make sure that the laser beam manipulating a chosen vortex does not displace any other one during the whole vortex trajectory. The positions of the vortex centres are initially identified with centroid calculations and used as seeds of a Voronoi diagram. The trajectory repositioning a single vortex from its initial location to its final position is then generated along segments of the Voronoi diagram so that the distance between the dragged vortex and the fixed vortices is maximized along the path.
Order parameter profile across the N/SC boundary
To study the evolution of vortex distribution after heating the SC above Tc with strong illumination we solve the Ginzburg–Landau equation to derive the spatial distribution of the order parameter for each temperature profile during the thermal relaxation.
Since the relaxation time of the order parameter is much smaller than that of the temperature profile, we consider an adiabatic evolution of , i.e., ∂t=0. Moreover, considering that the scale of the order parameter variation is much smaller than the hot-spot characteristic size, the term with the first derivative ∂r can be neglected in , so that the Ginzburg–Landau equation writes
Far away from the laser-induced hot spot, the temperature of the SC is equal to T0<Tc and the order parameter is uniform, determined by . Substituting the dimensionless order parameter into the Ginzburg–Landau equation, we get
After division by α(Tc−T0) and introduction of the superconducting coherence length ξ0 defined by , the equation writes
and is solved with the boundary conditions and .
All relevant data are available from the corresponding author.
How to cite this article: Veshchunov, I. S. et al. Optical manipulation of single flux quanta. Nat. Commun. 7:12801 doi: 10.1038/ncomms12801 (2016).
Brandt, E. H. Mixed State Properties from ‘100 Years of Superconductivity’ eds Rogalla H., Kes P. H. 125 (CRC (2012).
Huebener, R. P. Magnetic Flux Structures in Superconductors Springer (2001).
Goa, P. E., Hauglin, H., Olsen, A. A. F., Shantsev, D. & Johansen, T. H. Manipulation of vortices by magnetic domain walls. Appl. Phys. Lett. 82, 79–81 (2003).
Straver, E. W. J., Hoffman, J. E., Auslaender, O. M., Rugar, D. & Moler, K. A. Controlled manipulation of individual vortices in a superconductor. Appl. Phys. Lett. 93, 172514 (2008).
Auslaender, O. M. et al. Mechanics of individual isolated vortices in a cuprate superconductor. Nat. Phys. 5, 35–39 (2009).
Gardner, B. W. et al. Manipulation of single vortices in YBa2Cu3O6.354 with a locally applied magnetic field. Appl. Phys. Lett. 80, 1010–1012 (2002).
Kalisky, B. et al. Behavior of vortices near twin boundaries in underdoped Ba(Fe1−xCox)2As2 . Phys. Rev. B 83, 064511 (2011).
Embon, L. et al. Probing dynamics and pinning of single vortices in superconductors at nanometer scales. Sci. Rep. 5, 7598 (2015).
Kremen, A. et al. Mechanical control of individual superconducting vortices. Nano Lett. 16, 1626–1630 (2016).
Golod, T., Rydh, A. & Krasnov, V. M. Detection of the phase shift from a single Abrikosov vortex. Phys. Rev. Lett. 104, 227003 (2010).
Clem, J. R. Effect of nearby Pearl vortices upon the I c versus B characteristics of planar Josephson junctions in thin and narrow superconducting strips. Phys. Rev. B 84, 134502 (2011).
Huebener, R. P. & Seher, A. Nernst effect and flux flow in superconductors. I. Niobium. Phys. Rev. 181, 701–709 (1969).
Otter, F. A. Jr & Solomon, P. R. Thermal forces on vortices and entropy transport by Vortex flow in type-II superconductors. Phys. Rev. Lett. 16, 681–683 (1966).
Sergeev, A., Reizer, M. & Mitin, V. Thermomagnetic vortex transport: transport entropy revisited. EPL 92, 27003 (2010).
De Gennes, P. G. Superconductivity of Metals and Alloys Westview (1999).
Fossheim, K. & Sudboe, A. Superconductivity Wiley (2004).
Clarke, J. in Superconducting devices eds Ruggiero S. T., Rudman D. A. 51–100Academic (1990).
Lee, C. S., Janko, B., Derenyi, I. & Barabási, A. L. Reducing vortex density in superconductors using the ‘ratchet effect’. Nature 400, 337–340 (1999).
Vélez, M. et al. Superconducting vortex pinning with artificial magnetic nanostructures. J. Magn. Magn. Mater. 320, 2547–2562 (2008).
Allen, L. H. & Claassen, J. H. Technique for measuring the elementary pinning force in thin films. Phys. Rev. B 39, 2054–2059 (1989).
Park, G. S., Cunningham, C. E., Cabrera, B. & Huber, M. E. Vortex pinning force in a superconducting niobium strip. Phys. Rev. Lett. 68, 1920–1922 (1992).
Stoddart, S. T., Bending, S. J. & Somekh, R. E. Dynamics of individual vortices and flux bundles in Nb films. Supercond. Sci. Technol. 8, 459–463 (1995).
Breitwisch, M. & Finnemore, D. K. Pinning of a single Abrikosov vortex in superconducting Nb thin films using artificially induced pinning sites. Phys. Rev. B 62, 671–677 (2000).
Goldstein, M. J. & Moulton, W. G. Thermally induced flux motion and the elementary pinning force in Nb thin films. Phys. Rev. B 40, 8714–8719 (1989).
Zeldov, E., Larkin, A. I., Geshkenbein, V. B. & Konczykowski, M. Geometrical barriers in high-temperature superconductors. Phys. Rev. 73, 1428–1431 (1994).
Segev, Y. et al. Suppression of geometrical barrier in Bi2Sr2CaCu2O8+δ crystals by Josephson vortex stacks. Phys. Rev. B 83, 104520 (2011).
Bean, C. P. Magnetization of hard superconductors. Phys. Rev. Lett. 8, 250–253 (1962).
Tinkham, M. Introduction to Superconductivity McGraw–Hill (1996).
Fujimaki, A. High-Speed Digital Circuits from ‘100 Years of Superconductivity’ eds Rogalla H., Kes P. H. 431 (CRC (2012).
Goa, P. E., Hauglin, H., Olsen, A. A. F., Baziljevich, M. & Johansen, T. H. Magneto-optical imaging setup for single vortex observation. Rev. Sci. Instrum. 74, 141–146 (2003).
Tsuchiya, Y., Nakajima, Y. & Tamegai, T. Development of surface magneto-optical imaging method. Physica C 470, 1123–1125 (2010).
Veshchunov, I. S. et al. Direct evidence of flexomagnetoelectric effect revealed by single-molecule spectroscopy. Phys. Rev. Lett. 115, 027601 (2015).
We thank V.A. Skidanov and V.S. Stolyarov for providing the MO indicator and the niobium sample, respectively. We acknowledge the support by the European NanoSC COST Action MP1201, grants from the French National Agency for Research (ANR, project Electrovortex), Région Aquitaine, Idex Bordeaux (LAPHIA Program), the French Ministry of Education and Research, the Institut universitaire de France and the Fonds de Recherche du Québec—Nature et Technologies (fellowship for A.G.G.).
The authors declare no competing financial interests.
Supplementary Figures 1-4, Supplementary Notes 1-5 and Supplementary References (PDF 7249 kb)
Laser manipulation of individual vortices (MOV 3765 kb)
A vortex-broom at work (MOV 2985 kb)
About this article
Cite this article
Veshchunov, I., Magrini, W., Mironov, S. et al. Optical manipulation of single flux quanta. Nat Commun 7, 12801 (2016). https://doi.org/10.1038/ncomms12801
Physical Review Letters (2020)
Physical Review Research (2020)
Braiding Majorana fermions and creating quantum logic gates with vortices on a periodic pinning structure
Physical Review B (2020)
Nano Letters (2020)