Abstract
The post-translational modification S-sulfenylation functions as a key sensor of oxidative stress. Yet the dynamics of sulfenic acid in proteins remains largely elusive due to its fleeting nature. Here we use single-molecule force-clamp spectroscopy and mass spectrometry to directly capture the reactivity of an individual sulfenic acid embedded within the core of a single Ig domain of the titin protein. Our results demonstrate that sulfenic acid is a crucial short-lived intermediate that dictates the protein’s fate in a conformation-dependent manner. When exposed to the solution, sulfenic acid rapidly undergoes further chemical modification, leading to irreversible protein misfolding; when cryptic in the protein’s microenvironment, it readily condenses with a neighbouring thiol to create a protective disulfide bond, which assists the functional folding of the protein. This mechanism for non-enzymatic oxidative folding provides a plausible explanation for redox-modulated stiffness of proteins that are physiologically exposed to mechanical forces, such as cardiac titin.
Similar content being viewed by others
Introduction
Protein folding defines a molecular self-assembly process that is finely tuned by a subtle interplay between enthalpic and entropic contributions1,2,3. An extra layer of complexity is added when a native covalent disulfide bond needs to reform along the folding pathway4,5. Other chemical alterations, such as post-translational modifications, pose further challenges to the successful completion of the folding process.
Cysteine is a principal target for post-translational modifications, especially those related to oxidative stress6. Due to the presence of empty d-orbitals ready for bonding, the highly polarizable sulfur atom can display oxidation states ranging from −2 to +6 (refs 7, 8). Cysteine sulfenic acid (Cys-SOH) is the first oxidation step of cysteinyl thiols (Cys-SH)9 and the resulting post-translational modification, cysteine S-sulfenylation, has been identified as a redox sensor in an increasing number of proteins10,11. However, the unusually high reactivity of -SOH—a consequence of its dual electrophilic and nucleophilic character7,10,12—, together with its invisibility to ultraviolet–visible and fluorescent spectroscopic detection13, has rendered its characterization challenging. In general, stabilization of protein sulfenic acid is highly dependent on the protein microenvironment11, following the general notion that solvent-exposed cysteines feature increased chemical lability14.
Identification of protein sulfenic acids has been mostly indirect, through chemical labelling with 5,5-dimethyl-1,3-cyclohexadione (dimedone)15, a mass-shifting molecular probe that specifically traps -SOH moieties and is easily identifiable with mass spectrometry (MS)16,17,18. Despite this phenomenal progress12, given the irreversible nature of the detection methods, which interfere with the intrinsically fast reactivity of Cys-SOH, direct identification of the dynamics of a particular protein -SOH and its implication on folding remains largely elusive.
Under oxidative conditions, Cys-SOH can be readily oxidized to more stable products, namely sulfinic (Cys-SO2H) or sulfonic (Cys-SO3H) acids6. The transition to these higher oxidation state species has been generally regarded as irreversible, and a marker for oxidative damage. Such deleterious pathway can be avoided if the electrophilic sulfur atom in -SOH reacts with an intramolecular neighbouring protein thiol nucleophile to form a stable disulfide bond19,20. Such oxidant-mediated disulfide bond formation process, typically occurring within the reducing conditions of the cytosol on a transient increase in oxidative stress, differs from the enzyme-catalysed formation of structural disulfide bonds. This latter process takes place in the oxidizing milieu of the endoplasmic reticulum or the mitochondrial inter membrane space in eukaryotes or in the periplasmic space in bacteria19,21 via the formation of a mixed disulfide intermediate between the catalytic enzyme and the protein substrate22,23. Despite its in vivo relevance, a comprehensive molecular description of the formation of disulfide bonds within the context of non-enzymatic oxidative folding is still missing.
Here we use a combination of single-molecule force-clamp spectroscopy, protein engineering techniques and MS to directly monitor the reactivity of an individual force-induced -SOH moiety occurring within a single immunoglobulin domain of the giant titin protein. Our results demonstrate that the fleeting -SOH intermediate, the life-time of which is largely conformation dependent, acts as a molecular switch that directly modulates protein function. In a short window of opportunity in the second timescale, the -SOH moiety is able to avoid irreversible protein misfolding—induced by cysteine hyperoxidation and/or aldehyde condensation—by readily forming a disulfide bond that guarantees the functional final folding of the protein. We hypothesize that this mechanism for non-enzymatic oxidative folding may be a common place for oxidation-induced post-translational modifications occurring on solvent-exposed cysteines, drastically affecting the elastic properties of proteins that are exposed to mechanical forces.
Results
-SOH triggers disulfide bond formation
-SOH is typically induced by exposing a cysteine residue to high concentrations of hydrogen peroxide (H2O2)24. However, its fast kinetics (10–107 M−1 s−1)25,26 and its further reactivity to higher oxidation state species often precludes the capture of this transient -SOH intermediate. An alternative means to create a protein -SOH in a much more controlled manner is based on the alkaline hydrolysis of an individual disulfide bond, resulting in the stoichiometric formation of a -SOH and a thiolate27,28,29 (Fig. 1a). Albeit admittedly less physiologically relevant, this strategy is also found in nature30,31, as reported for phosphoglycerate kinase reductase32,33.
Using an experimental single-molecule mechanical assay designed previously34, an individual -SOH moiety can be readily created by the hydrolysis of a single protein disulfide bond under high-pH conditions (Fig. 1a). The atomistic detail of this process has been provided by highly revealing molecular quantum mechanics/molecular mechanics (QM/MM) simulations35,36. We now set out to extend our experimental approach to probe whether each cleaved disulfide bond can be reformed in the absence of a catalytic enzyme, and how such putative reformation process affects the entire protein folding phenomena.
In our experiments, we used a single-molecule force-clamp atomic force (AFM) spectrometer (Fig. 1b) to stretch under high alkali conditions (pH=12.8), a polyprotein containing eight identical domains of a mutated titin Ig27 domain containing two cysteines in positions 24 and 55, which readily form a structurally buried disulfide bond (Fig. 1a). We designed a five-pulse force protocol to measure the protein elongation over time, which enables independent capture of each individual cleavage and reformation event, with single bond resolution (Fig. 1c). Applying an initial pulse of 150 pN for 0.5 s to the (I27E24C–K55C)8 polyprotein resulted first in the presence of fast elongation steps of ∼15 nm (inset, grey), corresponding to the unfolding and extension of each individual protein domain up to the rigid disulfide bond, which became exposed to the solvent environment (Fig. 1c, grey). A second force pulse at a much higher force (500 pN) triggered the forced-induced scission of each individual disulfide bond via a SN2 nucleophilic attack by the hydroxyl (OH−) anion. Each individual hydrolysis event is fingerprinted by a step of ∼10 nm (inset, green), corresponding to the extension of the amino acids that were trapped behind the disulfide bridge (Fig. 1c, green). The two distinctive step-size populations in these first two high-force pulses (initial pulse) are clearly observed in the bimodal histogram shown in Fig. 1d. Notably, after the cleavage of all disulfide bonds at 500 pN, the fully unfolded and extended polyprotein is extended to almost its contour length and all of its backbone residues are fully exposed to the chemical environment of the measuring solution.
Shortly after the last individual rupture event, the stretching force was completely withdrawn for tq=5 s to trigger the folding of the polypeptide. Such force-quench approach allows dissection of the distinct phases involving mechanical folding from highly extended states37,38,39,40. After the quenching pulse, a test pulse—composed again of a stretching sequence of 0.5 s at 150 pN followed by a pulse at a higher force of 500 pN— was applied to the protein to probe its folding status.
The elongation pattern of the protein during the test pulse enables discrimination among three different possible oxidative folding scenarios; (i) if the protein has not been able to fold within the quench time, it will extend featuring the absence of well-defined steps37,39. Instead, (ii) if the protein is able to refold—thus regaining mechanical stability—but the disulfide bond has not been reformed, the protein will extend featuring steps of 25 nm, corresponding to the unfolding and stretching of the fully folded protein in the absence of the mechanically rigid, covalent disulfide bond38. Finally, (iii) if the protein has been able to both successfully refold and reform the disulfide bond, the test pulse will be then composed of the unfolding ∼15 nm steps followed by the ∼10 nm steps corresponding to the (re)-rupture of each successfully reformed disulfide bond. In summary, a 25 nm step provides the signature of a properly folded domain with no disulfide, whereas a 15 nm step (followed by a 10 nm step) indicates a properly folded domain with a formed disulfide.
The latter scenario was indeed observed in our folding trajectories (Fig. 1c). The histogram corresponding to the distribution of step sizes populating the test pulse hallmarks the presence of both ∼15 nm and ∼10 nm steps (Fig. 1e). Surprisingly, not a single event corresponding to the ∼25 nm steps was observed. Interestingly, a small population (∼4%) of ∼21 nm events was also present in the high-force pulse, corresponding to the scission of a non-native disulfide bond formed between two contiguous domains within the polyprotein chain40 (Supplementary Fig. 1). As a control experiment, we verified that the oxidized protein was able to independently refold under high-pH conditions, as shown in Supplementary Fig. 2. Altogether, our experiments qualitatively show that an individual disulfide bond is able to reform in the absence of catalytic enzymes.
We next examined whether such oxidative folding scenario could also be reproduced when the specific location of the disulfide bond within the structure of the I27 protein was changed. We repeated the experiments reported in Fig. 1 on a distinct polyprotein construct, (I27G32C–A75C)8, in which the cysteine mutations were engineered in different positions of the I27 sequence. The resulting trajectories (Supplementary Fig. 3) qualitatively certified the successful reformation of the disulfide bond along the folding pathway.
The kinetics of disulfide bond reformation
To quantify the kinetics of disulfide bond reformation, we repeated the experiments shown in Fig. 1 and varied the quench time (tq) within the range spanning tq=0.5–15 s (Fig. 2). As observed in the individual trajectories shown in Fig. 2a,b, the longer the protein was allowed to refold in the absence of force, the higher the percentage of disulfide bonds that reformed (hallmarked by the appearance of ∼10 nm steps in the test pulse). As shown in Fig. 2c, the per cent of disulfide bond reformation increased exponentially with the quench duration, suggesting that the reformation of the protein disulfide bond is a two-state process with an associated characteristic time of kref=0.45 s−1. This is consistent with a scenario where the nucleophilic thiol would attack the electrophilic -SOH centre via a concerted SN2 reaction, occurring through a well-defined transition state41,42, to reform the disulfide bond. Noteworthy, the measured reformation rate is expected to be pH dependent, since the nucleophilic capacity of the free thiolate to attack the electrophilic -SOH will be largely dependent on the thiolate being completely deprotonated. However, given the expected pKa∼8 for each free cysteine, we do not anticipate these rates to be significantly affected in our high-pH experiments, although this might have an effect at lower pH values. Remarkably, the measured rate of disulfide reformation for the (I27G32C–A75C)8 construct (kref=0.42 s−1) was found to be almost identical to that measured for the (I27E24C–K55C)8 polyprotein, thus demonstrating that the disulfide bond reformation kinetics is not significantly altered by changing the position of the disulfide bond within the protein structure (Supplementary Fig. 3).
Reactivity of -SOH depends on solvent accessibility
While generally short, the life-time of -SOH has been described to crucially depend on the degree of solvent exposure20,43. Force-clamp AFM allows to explore new protein conformations that are not usually sampled in classical ensemble experiments conducted in the bulk44. In particular, the force-triggered low-entropy, highly extended unfolded state fully exposes the backbone residues to the solvent environment45. To interrogate the conformation-dependent reactivity of -SOH, we systematically changed the time the fully reduced and mechanically stretched protein was exposed to the solvent, text, thereby increasing the probability to be chemically modified, while keeping the quench time constant (tq=8 s, Fig. 3a,b). Leaving the protein stretched for text=0.5 s resulted in a ∼55% disulfide bond reformation. Substantially increasing the extended time up to text=30 s considerably decreased the reformation probability down to ∼5%. The absence of disulfide bond reformation inevitably resulted in protein misfolding, since we never observed the presence of a 15 nm step without the companion 10 nm step in the test pulse. The evolution of the per cent of disulfide bond reformation as a function of text showed a marked, fast decrease (Fig.3c). While fitting a single exponential to the data qualitatively described the time-course of the process with an associated decaying rate of k=0.17 s−1 (χ2red=5.02), a double exponential (k1=0.065 s−1 and k2=0.695 s−1) slightly increased the goodness of the fit (χ2red=2.78, Supplementary Fig. 4), reminiscent of two independent reaction pathways occurring concomitantly.
To directly quantify the relationship between the degree of solvent exposure and -SOH reactivity, we systematically varied the stretching force after triggering the formation of -SOH. Using a six-pulse force protocol (Fig. 4), the initial two pulses unfolded the protein (150 pN, 0.3 s) and triggered the rupture of the disulfide bond within a short time (500 pN, 2 s). The force was then varied within a range spanning 0–500 pN during 4 s (grey box) before being withdrawn (0 pN, tq=8 s) to trigger collapse39 and oxidative folding. As before, the folding success was probed by two high force test pulses (150 pN followed by 500 pN). The folding trajectories shown in Fig. 4a qualitatively show that the number of 10 nm steps observed in the test pulse (red asterisks) significantly decreased as the stretching force was increased. This tendency was quantitatively verified in Fig. 4b, displaying the percentage of disulfide bond reformation as a function of the stretching force. Crucially, the observed trend can be nicely reproduced by the worm-like chain (WLC) model of polymer elasticity (using a persistence length P=1.2 nm)45, which relates the protein’s end-to-end length with the pulling force. At each defined force, the WLC model defines an equilibrium end-to-end conformation that is characterized by a different degree of solvent exposure of the protein residues46. Altogether, these experiments demonstrate that the reactivity of -SOH—intimately related to the oxidative folding fate of the protein— is largely determined by the protein’s conformation.
To investigate the molecular origin of the chemical modification that prevented the reformation of the disulfide bond at high pulling forces, we conducted MS measurements on the monomeric I27E24C–K55C protein under high-pH conditions. MS spectra revealed the presence of both sulfinic and sulfonic acid, thus suggesting the successive irreversible oxidation of -SOH (Supplementary Figs 5 and 6 and Supplementary Table 1). Notably, the presence of aldehyde (with a concomitant loss of H2S) was also detected with good evidence (Supplementary Fig. 7 and Supplementary Table 1). Indeed, aldehyde formation has been long reported as a sub-product of the decomposition of -SOH under high alkali conditions28,47,48. While both the protein conformation and the timescales sampled in the MS and single-molecule mechanics experimental approaches are certainly different, the MS data provide excellent complementary information that illustrates the most plausible chemical processes responsible for the misfolding events captured in the nanomechanical experiments, greatly affecting the folding and elastic properties of the individual titin polyproteins.
Dimedone binding confirms the presence of -SOH
To provide a final, unambiguous proof that -SOH is actively involved in the molecular mechanism driving the reformation of disulfide bonds, we directly tested the effect of dimedone on the outcome of our oxidative folding assay. Dimedone has been vastly demonstrated to effectively react with -SOH (but not with thiols) with high specificity (Fig. 5a)7,15. Addition of 30 mM of dimedone to the measuring solution markedly blocked both the reformation of the disulfide bond and the folding of the protein (Fig.5b), decreasing the bond reformation efficiency down to ∼15% (Fig. 5c). This drastic decrease in the reformation (and subsequent refolding) efficiency was further exacerbated (down to a residual ∼6%) when the protein was left fully extended at high forces for a longer period of time, text=10 s, promoting dimedone binding (Fig. 5c). By contrast, dimedone did not prevent the protein from successfully refolding when the disulfide bond remained oxidized (Supplementary Fig. 8). To indisputably verify the presence of the covalent S-dimedone adduct, we conducted MS measurements on the monomeric I27E24C–K55C protein under high-pH conditions. The resulting MS/MS fragmentation spectra identified, for both 24 and 55 cysteines, a shift in Δm/z=+138 Da (Fig. 5d, Supplementary Fig. 9 and Supplementary Table 2), which confirmed the presence of dimedone.
Discussion
Oxidative stress defines elevated intracellular levels of reactive oxygen species (ROS)—mostly including superoxide anion, hydrogen peroxide and hydroxyl radicals—that cause damage to DNA, lipids and proteins49. While ROS were originally known for oxidizing various cellular compartments and promoting aging and a broad range of pathologies, more recent evidence shows that ROS also acts as signalling molecules that regulate basic cellular processes including growth, differentiation and cell migration26,50. It is increasingly clear that a major mechanism of redox signalling is the dynamic regulation of protein function by the chemiselective oxidation of cysteine residues. The first product of oxidation is Cys-SOH, exhibiting an oxidation state of (0). Despite its ephemeral nature, -SOH has been trapped in a number of crystallized proteins12,51. These carry a wide range of functionalities12, encompassing enzyme catalysis (such as protein tyrosine phosphatases52, kinases53 and cysteine proteases54), transcription factors (including OxyR55, Yap1 (ref. 56) and NF-kB57) and ion channels (such as ORAI1 (ref. 58) and Kv1.5 (ref. 59)). This progress notwithstanding these structures provide a static snapshot, and the fast dynamics of such important post-translational modification often evaded characterization.
The relatively small number of crystallized proteins contrasts with the increasingly larger number of proteins where -SOH has been identified in vivo. Indeed, the dimedone-based cell-permeable chemical probe DAz-2, capable of detecting SOH-modified proteins directly in living cells50, has allowed for a comprehensive analysis of the cellular ‘sulfenome’18, revealing the presence of (>1,000) S-sulfenylation sites on more than 700 proteins in intact cells, highly prevalent in different cancer cell lines14,60. Importantly, these newly identified protein targets largely expand the diversity of functionalities of the already identified sulfenylated proteins. Therefore, unveiling the molecular mechanisms defining -SOH reactivity is an essential requirement for the understanding of redox regulation in cells.
Our single-molecule approach allows independent measurement of the protein folding and disulfide bond formation processes, enabling us to directly visualize the molecular events defining the complex kinetics of the oxidative folding mechanism. The crucial role of disulfide reformation in protein refolding was further probed in experiments on the pre-reduced (I27E24C–K55C)8 polyprotein at pH=12.8. While the oxidized protein was able to refold under high-pH conditions (Supplementary Fig. 10), the folding efficiency of the pre-reduced protein was significantly decreased down to ∼20%, exhibiting a seemingly slow folding kinetics, kfold=0.10 s−1 (Supplementary Fig. 10). This result contrasts with the much higher folding efficiency of the sulfenylated protein, which folds on the reformation of the disulfide bond (kref=0.45 s−1), ultimately setting the associated folding rate (kfold=0.46 s−1). These experiments demonstrate that while the protein is mostly unable to successfully refold on its own under high pH, the reformation of the disulfide bond dramatically increases its folding efficiency. In this sense, -SOH emerges as a key molecular player able to rescue the protein from misfolding by forming a protective disulfide bond that allows the protein to successfully refold. This kinetic scheme seems to differ from the enzyme-mediated oxidative folding findings catalysed by PDI40 and DsbA61, whereby the same I27 protein mutant was able to refold on its own while keeping the catalytic enzyme attached through a mixed disulfide conformation before the disulfide bond was successfully reformed at a later stage, the overall kinetics being largely controlled by the off-rate dynamics of the catalytic enzyme.
We postulate that the oxidative folding mechanism promoted by -SOH condensation with a neighbouring intramolecular thiolate is mechanistically different from the process where the reformation of the disulfide bond occurs through a mixed disulfide intermediate, which characterizes the enzyme-catalysed oxidative folding process22. To test this hypothesis, we repeated the force-quench experiments at pH=7.2 using the small thiol 3-mercapto-1-propanol as the attacking nucleophile41 (Supplementary Fig. 11). In this case, the rupture of each individual disulfide bond resulted in the formation of a thiolate and the newly formed mixed disulfide. Unlike the case where -SOH could readily reform the cleaved disulfide, thus triggering the protein to correctly fold, when 3-mercapto-1-propanol was used as a nucleophile, the number of reformation events was vanishingly small. By contrast, these experiments highlighted (albeit with a relatively low abundance) the presence of 25 nm steps in the test pulse. Altogether, our experiments demonstrate the unique capabilities of -SOH to form a disulfide bond employing a chemical mechanism that is fundamentally different from that occurring during enzyme-mediated protein folding22,40. In this novel -SOH-mediated scenario, the newly formed disulfide reduces the conformational space of the protein, and subsequently triggers almost ‘instantaneous’ folding of the remaining protein in the timescale of our experiments. Thus, the kinetics of disulfide bond formation is the rate-limiting step that defines the overall kinetics of the non-enzymatic oxidative folding process. It is certainly remarkable that enzyme-free oxidative folding occurs under high pH conditions at a similar rate (kref=0.45 s−1) than that catalysed by a dedicated enzyme such as PDI (kref=0.35 s−1) and DsbA (kref=0.70 s−1)40,61.
Our experiments demonstrate that the probability of reforming the disulfide bond increases exponentially with time (Fig. 2). This implies that, when the protein lies within the non-folded collapsed conformation after the force-quench, the highly reactive -SOH moiety is sterically stabilized within the microenvironment of the collapsed protein, most likely through becoming cryptic to the solvent. This situation contrasts with the fast evolution of the -SOH in the fully extended state (Fig. 3). At the present stage it is difficult to unambiguously pinpoint the exact origin of the fast reactivity undergone by the solvent-exposed -SOH. Due to the relatively short timescale of our single-molecule experiments, it is unlikely that the progression to higher oxidation state species is favoured, and hence we hypothesize that the aldehyde formation mechanism might be prevalent28,47,48, which would account for the main pathway described by the single exponential fit. Given the slightly higher accuracy of the double exponential fit, we postulate a possible competition between the high oxidation pathway (promoted by the dissolved oxygen in solution) and the aldehyde formation mechanism, exhibiting similar rate constants. Noteworthy, we cannot rule out the possibility that a fraction of the aldehyde population found in our MS experiments is a result of the direct alkali-mediated cleavage of the disulfide bond through an α-elimination mechanism, which competes with a β-elimination and the hydroxyl-mediated SN2 nucleophilic attack27,28,29,62 (Supplementary Fig. 12). Indeed, our MS spectra show evidence of the three competing pathways (Supplementary Figs 7, 13 and 14 and Supplementary Table 1). However, it is very likely that, in the presence of force, the hydrolysis (SN2) pathway is largely favoured over the elimination route, as suggested by recent quantum mechanical simulations under force63, in which case the presence of aldehyde is likely to stem mostly from the evolution of -SOH. Further verification of the plausible competing reaction pathways under force, probably guided by ab initio simulations, might provide a comprehensive understanding of this complex reactivity landscape. In any case, while the high-pH conditions tested in our experiments probably trigger a faster -SOH reactivity towards the aldehyde product than one would perhaps expect under more physiologically relevant conditions, our experiments readily demonstrate that the reactivity of -SOH is largely conformation dependent, crucially contributing to the folding fate of the protein. We speculate that this mechanism might hold true in situations where -SOH is triggered by other biologically occurring oxidative species such as H2O2. To test this hypothesis, we conducted folding experiments on the wt-I27 immunoglobulin module (containing two cryptic and native cysteines in positions 47 and 63 that do not form a disulfide bond) in the presence of 300 μM H2O2 at neutral pH (Supplementary Fig. 15). Stretching and unfolding the (wt-I27)8 polyprotein exposed the cryptic cysteines to the oxidative conditions. Quenching the force and re-unfolding back again resulted in (i) the misfolding of the protein, fingerprinted by the absence of recovery of mechanical stability, and (ii) the inability of the protein to completely re-extend up to its unfolded contour length, suggestive of the presence of a stiff, non-native (probably interdomain) disulfide bond. Controls were performed with the double mutant (I27C47A–C63A)8 polyprotein (devoid of both cysteines) showing full refolding and complete protein extensibility. These experiments, conducted in the presence of the less controllable yet physiologically more relevant H2O2 oxidative agent, strongly suggest that, when solvent exposed on mechanical unfolding64, cryptic cysteines undergo post-translational modifications that markedly block protein folding, while lending further support to the SOH-mediated mechanism of disulfide bond formation that we investigated using the high-pH experimental strategy.
Taken together, our nanomechanical experiments put forward a rather unique kinetic scheme (Fig. 6) that captures the intricate conformation-dependent reactivity of the transitory -SOH intermediate, directly linked with the folding fate of the protein. In the case of titin, a protein that is physiologically exposed to mechanical force, such SOH-regulated folding scenario might have important consequences for the functional protein elasticity.
Titin is a molecular ruler that determines the passive elasticity of muscle, and is key to ensure, for example, cardiac function65. Indeed, alterations in the stiffness of cardiac titin are related to a number of myopathies, such as diastolic dysfunction66. The I-band region of titin is formed by a compliant, unstructured region (PEVK and N2B) intercalated between folded immunoglobulin domains, which are mechanically resistant67. To adapt to the mechanical perturbations induced by the heartbeats, titin needs to reversibly modulate its length by entropic extension/recoil of the compliant region and unfolding/refolding (at least of the mechanically weak) immunoglobulin domains64. On immunoglobulin domain unfolding, the stiffness of the protein is greatly reduced, and it is increased back again on refolding. Recent pioneering evidence shows that S-glutathionylation of cryptic cysteines blocks titin refolding64. Our results are likely to add S-sulfenylation to the toolbox of post-translational modifications that regulate titin elasticity; whereas cysteine hyperoxidation irreversibly suppresses Ig27 refolding, thus severely decreasing its stiffness, the reformation of a protective disulfide bond has the opposing effect. In this sense, -SOH would act as ‘mechanical switch’, helping titin adapt its elasticity in response to the fluctuating oxidative stress conditions. We hence speculate that -SOH might work as an active redox sensor that directly regulates protein elasticity.
Methods
Protein engineering
The (I27E24C–K55C)8, (I27G32C–A75C)8, (I27)8 and (I27C47A–C63A)8 polyproteins were subcloned using the BamHI, BglII and KpnI restriction sites. The multidomain proteins and the I27E24C–K55C monomer were cloned into the pQE80L (Qiagen) expression vector, and transformed into the BLR(DE3) Escherichia coli expression strain. The cells were grown in LB broth supplemented with 100 μg ml−1 ampicillin at 37 °C. After reaching an OD600 of ∼0.6, the cultures were induced with Isopropyl β-D-1-thiogalactopyranoside (1 mM) and incubated overnight at 20 °C. After collecting the cells, disruption using a French Press was performed. The polyproteins from the lysate were purified by metal affinity chromatography on Talon resin (Clontech) followed by gel filtration using a Superdex 200 10/300 GL column (GE Biosciences). Protein concentration in the samples was estimated using the Bradford protein assay.
Force spectroscopy
Single-molecule force-clamp spectroscopy AFM experiments were conducted at room temperature using both a home-made set-up68 and a commercial Luigs and Neumann force spectrometer69. The sample was prepared by depositing 1–10 μl of protein in PBS solution (at a concentration of 1–10 mg ml−1) onto a freshly evaporated gold coverslide. Each cantilever (Si3N4 Bruker MLCT-AUHW) was individually calibrated using the equipartition theorem, giving rise to a typical spring constant of ∼12–17 pN nm−1. Single proteins were picked up from the surface and pulled at a constant force. Individual polyproteins were fished by pushing the cantilever onto the surface exerting a contact force of 500–1,500 pN so as to promote the non-specific adhesion of the proteins on the cantilever surface. The piezoelectric actuator was then retracted to produce a set deflection (force), which was set constant throughout the experiment (∼8–45 s) thanks to an external, active feedback mechanism while the extension was recorded. The force feedback was based on a proportional, integral and differential amplifier whose output was fed to the piezoelectric positioner. The feedback response is limited to ∼3–5 ms. Thanks to the high-resolution piezoelectric actuator, our measurements of protein length have a peak-to-peak resolution of ∼0.5 nm. Data of the force traces was filtered using a pole Bessel filter at 1 kHz. In all instances the protein was unfolded at 150 pN for 0.5 s, followed by a high-force pulse of 500 pN, except when the protein was extended for very short times (0.5 and 0.75 s) when a pulse of 800 pN was applied. Experiments were carried out in a sodium phosphate buffer solution, specifically, 50 mM sodium phosphate (Na2HPO4 and NaH2PO4), 150 mM NaCl. The pH was adjusted at pH=7.4 and pH=12.8. The final pH value in each solution was adjusted by adding the required amounts of NaOH solutions. Measuring solutions were filtered through a 0.2-μm membrane before each experiment. In the case of the dimedone experiments, 5,5-Dimethyl-1,3-cyclohexanedione (Sigma-Aldrich, 95%) was dissolved in pH=12.8 PBS buffer to give a final concentration of 30 mM. The pH of the dimedone solution was checked before each experiment. 3-Mercapto-1-propanol (Sigma-Aldrich, 95%) was freshly prepared before every experiment, dissolved in pH=7.4 PBS buffer to give a final concentration of 400 mM. Pre-reduced (I27E24C–K55C)8 polyproteins were obtained by incubating the polyproteins in 10 mM Tris(2-carboxyethyl)phosphine hydrochloride (TCEP, Sigma-Aldrich) for 20 min before AFM experiments. Hydrogen peroxide solutions (H2O2, Sigma-Aldrich) were obtained by dissolving the 30% (v/v) solution in PBS to a final concentration of 300 μM H2O2.
Data analysis
All data were recorded and analysed using custom software written in Igor Pro 6.0 (Wavemetrics). For all polyproteins, only recordings showing the signature of at least 5 unfolding events (15 nm steps) followed by 5 reduction events (10 nm steps) were analysed. We considered only recordings corresponding to the test pulse in which the protein was extended back to the same full unfolded length characterizing the initial pulse, to ensure that the same protein was completely stretched in the two pulses. No traces that included unfolding events during the high force pulse were included in the analysis. The number of independent observations, N, for a particular condition was counted as the total number of protein domains (as observed in the initial pulse). S.e.m. for the refolding fraction was estimated through the boostrap method, where each recording was treated as an independent data point. s.e.m. for the fit parameters was determined as standard error for the coefficient in the fit, accounting for the measurement errors of the individual data points. To assess the goodness of the fits in Fig. 2 and Fig. 3, we conducted reduced χ2, χ2red, analysis. Data in Fig. 4b was compared with the WLC model of polymer elasticity70, using as fixed parameters Lc=28.5 nm, P=1.2 nm.
MS experiments
Enzymatic digestion. The monomeric protein samples were prepared by diluting 20 μl of protein (0.5 μg μl−1) in 20 μl of either PBS pH 7.4, PBS pH12.8 or PBS pH12.8+30 mM dimedone. The high-pH samples had a calculated final pH=12.5. In-solution digestion with trypsin of 5 μg of total protein monomers was performed before subsequent analysis by MS. Trypsin digestion at a ratio of 1:20 (enzyme:substrate) was carried out for 2 h at 37 °C.
LC-MS/MS. Chromatographic separations were performed using an EASY NanoLC system (ThermoFisherScientific, UK). Peptides from a total protein amount of 2 μg on column were resolved by reversed phase chromatography on a 75 μm C18 column using a three step linear gradient of acetonitrile in 0.1% formic acid. The gradient was delivered to elute the peptides at a flow rate of 300 nl min−1 over 60 min. The eluate was ionized by electrospray ionization using an Orbitrap Velos Pro (ThermoFisherScientific, UK) operating under Xcalibur v2.2. The instrument was programmed to acquire in automated data-dependent switching mode, selecting precursor ions based on their intensity for sequencing by collision-induced fragmentation using a Top20 CID method. The MS/MS analyses were conducted using collision energy profiles that were chosen based on the mass-to-charge ratio (m/z) and the charge state of the peptide.
MS database searching
Raw MS data were processed into peak list files using Proteome Discoverer (ThermoScientific; v1.4). Processed raw data was searched using the Mascot search algorithm (www.matrixscience.com) against an in-house database containing the sequence of the mutant protein monomer. The data was also searched using the Error Tolerant function which by iterating through a comprehensive list of chemical and post-translational modifications, determines the mass of additions or losses from the residues in the peptide sequences without prior knowledge of the expected modifications. LC/MS/MS analysis has successfully identified 100% sequence coverage of the mutant protein monomer with various forms of oxoacid modifications. The Mascot database searching algorithm applies a 95% probability CI in the MOWSE scoring that is an identification threshold. Mascot search output files were uploaded into the Scaffold spectral visualization software (v.4.4.6; www.proteomesoftware.com) which allows statistical filtering of the data at the protein and peptide level for which these filters were applied to the data at a the lowest stringency of 5% confidence interval (CI) for minimum protein, 0% CI for peptide values and minimum one peptide assignment. This was chosen to include all assigned peptides that may have fallen below the database applied 95% CI due to poor fragmentation matching and incorrect sequence assignment. All fragmentation spectra were verified manually to determine correct assignment of sequences and post-translation modifications.
Initial data searching concentrated on finding -SOH modifications after the addition of the cyclic diketone compound, dimedone. Dimedone specifically traps this oxoacid form and binds covalently to the cysteine residue. This binding with the subsequent loss of two protons adds a mass of 138.1 Da to the residue, which is detected on the peptide by fragmentation in MS/MS mode in the mass spectrometer.
Under conditions of high pH and without the presence of dimedone to specifically trap the -SOH, there is possible evolution of the oxoacids to be present in their different forms. The protein monomer treated with high pH alone was searched against the in-house database, which included the modifications -SOH, sulfinic acid and sulfonic acid. Further in-depth searching of the database was also performed with the modifications aldehyde, dehydroalanine and sulfide. Database searching assigned 99% sequence coverage of the protein monomers and also assigned various oxoacid modifications on the cysteine residues of interest.
Further analysis was performed using a fresh sample of monomers in a high pH only environment and treated with enzymatic digestion as previously described. This sample was digested almost immediately following the addition of the high-pH buffer. This was performed to determine whether the previously identified oxoacid modifications were present at point of treatment, or if they had evolved over the length of time it had spent in the buffer before trypsin digestion. Almost complete sequence coverage was achieved once again following database searching of the mass spectrometer raw data. Oxoacid cysteine modifications sulfonic and sulfinic acid were identified at residue Cys55 as were the products of both α-elimination, aldehyde and β-elimination, persulfide and dehydroalanine.
Data availability
The MS proteomics data have been deposited to the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD004514. Additional information and the data supporting this research, including the single-molecule nanomechanics experiments, can be obtained from the corresponding author on request.
Additional information
How to cite this article: Beedle, A.E.M. et al. Protein S-sulfenylation is a fleeting molecular switch that regulates non-enzymatic oxidative folding. Nat. Commun. 7:12490 doi: 10.1038/ncomms12490 (2016).
References
Bryngelson, J. D., Onuchic, J. N., Socci, N. D. & Wolynes, P. G. Funnels, pathways, and the energy landscape of protein folding: a synthesis. Proteins 21, 167–195 (1995).
Wolynes, P. G., Onuchic, J. N. & Thirumalai, D. Navigating the folding routes. Science 267, 1619–1620 (1995).
Karplus, M. & Weaver, D. L. Protein-folding dynamics. Nature 260, 404–406 (1976).
Anfinsen, C. B. & Haber, E. Studies on the reduction and re-formation of protein disulfide bonds. J. Biol. Chem. 236, 1361–1363 (1961).
Anfinsen, C. B., Haber, E., Sela, M. & White, F. H. Jr. The kinetics of formation of native ribonuclease during oxidation of the reduced polypeptide chain. Proc. Natl Acad. Sci. USA 47, 1309–1314 (1961).
Paulsen, C. E. & Carroll, K. S. Cysteine-Mediated Redox Signaling: Chemistry, Biology, and Tools for Discovery. Chem. Rev. 113, 4633–4679 (2013).
Gupta, V. & Carroll, K. S. Sulfenic acid chemistry, detection and cellular lifetime. Biochim. Biophys. Acta Gen. Subjects 1840, 847–875 (2014).
Yang, J., Carroll, K. S. & Liebler, D. C. The expanding landscape of the thiol redox proteome. Mol. Cell. Proteomics. 15, 1–11 (2016).
Allison, W. S. Formation and reactions of sulfenic acids in proteins. Accounts Chem. Res. 9, 293–299 (1976).
Roos, G. & Messens, J. Protein sulfenic acid formation: From cellular damage to redox regulation. Free Radic. Biol. Med. 51, 314–326 (2011).
Poole, L. B. & Nelson, K. J. Discovering mechanisms of signaling-mediated cysteine oxidation. Curr. Opin. Chem. Biol. 12, 18–24 (2008).
Lo Conte, M. & Carroll, K. S. The redox biochemistry of protein sulfenylation and sulfinylation. J. Biol. Chem. 288, 26480–26488 (2013).
Kettenhofen, N. J. & Wood, M. J. Formation, Reactivity, and Detection of Protein Sulfenic Acids. Chem. Res. Toxicol. 23, 1633–1646 (2010).
Yang, J., Gupta, V., Carroll, K. S. & Liebler, D. C. Site-specific mapping and quantification of protein S-sulphenylation in cells. Nat. Commun. 5, 4776 (2014).
Benitez, L. V. & Allison, W. S. The inactivation of the acyl phosphatase activity catalyzed by the sulfenic acid form of glyceraldehyde 3-phosphate dehydrogenase by dimedone and olefins. J. Biol. Chem. 249, 6234–6243 (1974).
Furdui, C. M. & Poole, L. B. Chemical approaches to detect and analyze protein sulfenic acids. Mass. Spectrom. Rev. 33, 126–146 (2014).
Witze, E. S., Old, W. M., Resing, K. A. & Ahn, N. G. Mapping protein post-translational modifications with mass spectrometry. Nat. Methods 4, 798–806 (2007).
Yang, J. et al. Global, in situ, site-specific analysis of protein S-sulfenylation. Nat. Protoc. 10, 1022–1037 (2015).
Cremers, C. M. & Jakob, U. Oxidant sensing by reversible disulfide bond formation. J. Biol. Chem. 288, 26489–26496 (2013).
Rehder, D. S. & Borges, C. R. Cysteine sulfenic Acid as an Intermediate in Disulfide Bond Formation and Nonenzymatic Protein Folding. Biochemistry 49, 7748–7755 (2010).
Sevier, C. S. & Kaiser, C. A. Formation and transfer of disulphide bonds in living cells. Nat. Rev. Mol. Cell. Biol. 3, 836–847 (2002).
Nagy, P. Kinetics and mechanisms of thiol-disulfide exchange covering direct substitution and thiol oxidation-mediated pathways. Antioxid. Redox. Signal. 18, 1623–1641 (2013).
Depuydt, M., Messens, J. & Collet, J. F. How proteins form disulfide bonds. Antioxid. Redox. Signal. 15, 49–66 (2011).
Dickinson, B. C. & Chang, C. J. Chemistry and biology of reactive oxygen species in signaling or stress responses. Nat. Chem. Biol. 7, 504–511 (2011).
Reddie, K. G. & Carroll, K. S. Expanding the functional diversity of proteins through cysteine oxidation. Curr. Opin. Chem. Biol. 12, 746–754 (2008).
D'Autreaux, B. & Toledano, M. B. ROS as signalling molecules: mechanisms that generate specificity in ROS homeostasis. Nat. Rev. Mol. Cell. Biol. 8, 813–824 (2007).
Danehy, J. P. & Hunter, W. E. Alkaline decomposition of organic disulfides.2. Alternative pathways as determined by structure. J. Org. Chem. 32, 2047–2204 (1967).
Pal, B. C., Uziel, M., Doherty, D. G. & Cohn, W. E. Isolation and characterization of a pyrimidine sulfenic acid via scission of sulfur-sulfur bond in methyl analog of bis(4-thiouridine) disulfide. J. Am. Chem. Soc. 91, 3634–363 (1969).
Florence, T. M. Degradation of protein disulfide bonds in dilute alkali. Biochem. J. 189, 507–520 (1980).
Stathakis, P. et al. Angiostatin formation involves disulfide bond reduction and proteolysis in kringle 5 of plasmin. J. Biol. Chem. 274, 8910–8916 (1999).
Hogg, P. J. Disulfide bonds as switches for protein function. Trends. Biochem. Sci. 28, 210–214 (2003).
Lay, A. J. et al. Phosphoglycerate kinase acts in tumour angiogenesis as a disulphide reductase. Nature 408, 869–873 (2000).
Lay, A. J., Jiang, X. M., Daly, E., Sun, L. & Hogg, P. J. Plasmin reduction by phosphoglycerate kinase is a thiol-independent process. J. Biol. Chem. 277, 9062–9068 (2002).
Garcia-Manyes, S., Liang, J., Szoszkiewicz, R., Kuo, T. L. & Fernandez, J. M. Force-activated reactivity switch in a bimolecular chemical reaction. Nat. Chem. 1, 236–242 (2009).
Dopieralski, P. et al. The Janus-faced role of external forces in mechanochemical disulfide bond cleavage. Nat. Chem. 5, 685–691 (2013).
Hofbauer, F. & Frank, I. CPMD simulation of a bimolecular chemical reaction: nucleophilic attack of a disulfide bond under mechanical stress. Chemistry 18, 16332–16338 (2012).
Fernandez, J. M. & Li, H. Force-clamp spectroscopy monitors the folding trajectory of a single protein. Science 303, 1674–1678 (2004).
Garcia-Manyes, S., Brujic, J., Badilla, C. L. & Fernandez, J. M. Force-clamp spectroscopy of single-protein monomers reveals the individual unfolding and folding pathways of I27 and ubiquitin. Biophys. J. 93, 2436–2446 (2007).
Garcia-Manyes, S., Dougan, L., Badilla, C. L., Brujic, J. & Fernandez, J. M. Direct observation of an ensemble of stable collapsed states in the mechanical folding of ubiquitin. Proc. Natl Acad. Sci. USA 106, 10534–10539 (2009).
Kosuri, P. et al. Protein folding drives disulfide formation. Cell 151, 794–806 (2012).
Garcia-Manyes, S., Kuo, T. L. & Fernandez, J. M. Contrasting the individual reactive pathways in protein unfolding and disulfide bond reduction observed within a single protein. J. Am. Chem. Soc. 133, 3104–3113 (2011).
Vollhardt, P. N S. Organic Chemistry: Structure and Function Freeman and Company (2003).
Poole, L. B., Karplus, P. A. & Claiborne, A. Protein sulfenic acids in redox signaling. Annu. Rev. Pharmacol. 44, 325–347 (2004).
Stirnemann, G., Kang, S. G., Zhou, R. & Berne, B. J. How force unfolding differs from chemical denaturation. Proc. Natl Acad. Sci. USA 111, 3413–3418 (2014).
Walther, K. A. et al. Signatures of hydrophobic collapse in extended proteins captured with force spectroscopy. Proc. Natl Acad. Sci. USA 104, 7916–7921 (2007).
Stirnemann, G., Giganti, D., Fernandez, J. M. & Berne, B. J. Elasticity, structure, and relaxation of extended proteins under force. Proc. Natl Acad. Sci. USA 110, 3847–3852 (2013).
Crowder, J. A. & Harris, M. Mechanism of the sulfur lability in the alkali degradation of wool protein. J. Res. Natl Bur. Stand. 16, 475–480 (1936).
Toennies, G. Oxidation of cysteine in non-aqueous media—The ‘sulfenic acid’ as the primary oxidation product. J. Biol. Chem. 122, 27–47 (1937).
Schieber, M. & Chandel, N. S. ROS Function in redox signaling and oxidative stress. Curr. Biol. 24, R453–R462 (2014).
Leonard, S. E., Reddie, K. G. & Carroll, K. S. Mining the thiol proteome for sulfenic acid modifications reveals new targets for oxidation in cells. ACS Chem. Biol. 4, 783–799 (2009).
Salsbury, F. R., Knutson, S. T., Poole, L. B. & Fetrow, J. S. Functional site profiling and electrostatic analysis of cysteines modifiable to cysteine sulfenic acid. Protein Sci. 17, 299–312 (2008).
Lee, S. R. et al. Reversible inactivation of the tumor suppressor PTEN by H2O2. J. Biol. Chem. 277, 20336–20342 (2002).
Giannoni, E., Buricchi, F., Raugei, G., Ramponi, G. & Chiarugi, P. Intracellular reactive oxygen species activate Src tyrosine kinase during cell adhesion and anchorage-dependent cell growth. Mol. Cell. Biol. 25, 6391–6403 (2005).
Cotto-Rios, X. M., Bekes, M., Chapman, J., Ueberheide, B. & Huang, T. T. Deubiquitinases as a signaling target of oxidative stress. Cell Rep. 2, 1475–1484 (2012).
Lee, C. et al. Redox regulation of OxyR requires specific disulfide bond formation involving a rapid kinetic reaction path. Nat. Struct. Mol. Biol. 11, 1179–1185 (2004).
Paulsen, C. E. & Carroll, K. S. Chemical dissection of an essential redox switch in yeast. Chem. Biol. 16, 217–225 (2009).
Reynaert, N. L. et al. Dynamic redox control of NF-kappaB through glutaredoxin-regulated S-glutathionylation of inhibitory kappaB kinase beta. Proc. Natl Acad. Sci. USA 103, 13086–13091 (2006).
Bogeski, I. et al. Differential redox regulation of ORAI ion channels: a mechanism to tune cellular calcium signaling. Sci. Signal. 3, ra24 (2010).
Svoboda, L. K. et al. Redox-sensitive sulfenic acid modification regulates surface expression of the cardiovascular voltage-gated potassium channel Kv1.5. Circ. Res. 111, 842–853 (2012).
Seo, Y. H. & Carroll, K. S. Profiling protein thiol oxidation in tumor cells using sulfenic acid-specific antibodies. Proc. Natl Acad. Sci. USA 106, 16163–16168 (2009).
Kahn, T. B., Fernandez, J. M. & Perez-Jimenez, R. Monitoring oxidative folding of a single protein catalyzed by the disulfide oxidoreductase DsbA. J. Biol. Chem. 290, 14518–14527 (2015).
Parker, A. J. & Kharasch, N. The scission of the sulfur-sulfur bond. Chem. Rev. 583–628 (1959).
Dopieralski, P., Ribas-Arino, J., Anjukandi, P., Krupicka, M. & Marx, D. Force-induced reversal of beta-eliminations: stressed disulfide bonds in alkaline solution. Angew. Chem. Int. Ed. Engl. 55, 1304–1308 (2016).
Alegre-Cebollada, J. et al. S-Glutathionylation of cryptic cysteines enhances titin elasticity by blocking protein folding. Cell 156, 1235–1246 (2014).
Gautel, M. The sarcomeric cytoskeleton: who picks up the strain? Curr. Opin. Cell. Biol. 23, 39–46 (2011).
Chung, C. S. et al. Shortening of the elastic tandem immunoglobulin segment of titin leads to diastolic dysfunction. Circulation 128, 19–28 (2013).
Li, H. et al. Reverse engineering of the giant muscle protein titin. Nature 418, 998–1002 (2002).
Schlierf, M., Li, H. & Fernandez, J. M. The unfolding kinetics of ubiquitin captured with single-molecule force-clamp techniques. Proc. Natl Acad. Sci. USA 101, 7299–7304 (2004).
Popa, I., Kosuri, P., Alegre-Cebollada, J., Garcia-Manyes, S. & Fernandez, J. M. Force dependency of biochemical reactions measured by single-molecule force-clamp spectroscopy. Nat. Protoc. 8, 1261–1276 (2013).
Bustamante, C., Marko, J. F., Siggia, E. D. & Smith, S. Entropic Elasticity of Lambda-Phage DNA. Science 265, 1599–1600 (1994).
Acknowledgements
We thank Ainhoa Lezamiz for protein purification and Roger Morris for critical reading of the manuscript. We thank Aritz Garcia for help in acquiring preliminary data and Julio Fernández and Hagan Bayley for helpful discussions. A.E.M.B. is funded by an EPSRC DTP fellowship. This work was supported by the Marie Curie CIG (293462) grant, BBSRC (J00992X/1) grant, Royal Society Research grant (RG120038), BHF grant (PG/13/50/30426) and EPSRC Fellowship (K00641X/1), all to S.G.-M.
Author information
Authors and Affiliations
Contributions
S.G.-M. conceived research. A.E.M.B. and S.G.-M. designed experiments. A.E.M.B. conducted single-molecule experiments and analysed data. S.L. performed mass spectrometry experiments and analysed data. A.E.M.B. and S.G.-M. wrote the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-15 and Supplementary Tables 1-2 (PDF 2412 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Beedle, A., Lynham, S. & Garcia-Manyes, S. Protein S-sulfenylation is a fleeting molecular switch that regulates non-enzymatic oxidative folding. Nat Commun 7, 12490 (2016). https://doi.org/10.1038/ncomms12490
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms12490
This article is cited by
-
Targeting protein modifications in metabolic diseases: molecular mechanisms and targeted therapies
Signal Transduction and Targeted Therapy (2023)
-
Reaction-based fluorogenic probes for detecting protein cysteine oxidation in living cells
Nature Communications (2022)
-
The role of single-protein elasticity in mechanobiology
Nature Reviews Materials (2022)
-
The molecular mechanisms associated with the physiological responses to inflammation and oxidative stress in cardiovascular diseases
Biophysical Reviews (2020)
-
SIMLIN: a bioinformatics tool for prediction of S-sulphenylation in the human proteome based on multi-stage ensemble-learning models
BMC Bioinformatics (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.