Photosynthetic antenna systems enable organisms harvesting light and transfer the energy to the photosynthetic reaction centre, where the conversion to chemical energy takes place. One of the most complex antenna systems, the chlorosome, found in the photosynthetic green sulfur bacterium Chlorobaculum (Cba.) tepidum contains a baseplate, which is a scaffolding super-structure, formed by the protein CsmA and bacteriochlorophyll a. Here we present the first high-resolution structure of the CsmA baseplate using intact fully functional, light-harvesting organelles from Cba. tepidum, following a hybrid approach combining five complementary methods: solid-state NMR spectroscopy, cryo-electron microscopy, isotropic and anisotropic circular dichroism and linear dichroism. The structure calculation was facilitated through development of new software, GASyCS for efficient geometry optimization of highly symmetric oligomeric structures. We show that the baseplate is composed of rods of repeated dimers of the strongly amphipathic CsmA with pigments sandwiched within the dimer at the hydrophobic side of the helix.
Photosynthetic organisms use a variety of structurally and evolutionary unrelated light-harvesting antenna complexes1. These antennas are essential for the organisms to harvest light energy, which is transferred to the photosynthetic reaction centre and converted to chemical energy. Most photosynthetic antennas consist of a protein scaffold upon which pigment molecules are organized. The only exception is the chlorosome organelle of green bacteria2, where bacteriochlorophyll (BChl) c, d, or e molecules self-assemble into protein-free, rod-like nanotubes3,4. Detailed structural information is available for representatives of many light-harvesting antenna systems3,5,6,7,8,9,10,11, but not for the proteinaceous baseplate of chlorosomes2. This structure has three essential functions: (i) ensuring the structural integrity of the chlorosome organelle, (ii) connecting the chlorosomes to the photosynthetic reaction centre in the cell membrane and (iii) transferring excitation energy from the protein-free BChl c/d/e antennae towards the reaction centre.
Previous studies have shown that roughly 1,000–2,000 of CsmA protein subunits, each binding one BChl a pigment molecule, constitute the baseplate12. In addition, it has been seen by freeze-fracture electron microscopy (EM) that the resulting structure appears as a two-dimensional (2D) crystal-like structure13,14. The baseplate is oriented towards the cytoplasmic membrane and in the Cba. tepidum attaches to the so-called Fenna-Matthews-Olson (FMO) protein complex, which is the last antenna before the energy reaches the reaction centre (Fig. 1a,b)2.
Structural characterization of the CsmA baseplate is very challenging, due to the complex and heterogeneous composition of the native molecular assembly that precludes analysis with traditional techniques such as X-ray crystallography or liquid-state nuclear magnetic resonance (NMR). The baseplate structure is unlike any other light-harvesting antenna in that it appears impossible to isolate or otherwise produce a small defined intact CsmA oligomer from the baseplate in a stable soluble form suitable for studies of the in vivo structure, in particular, because it disintegrates irreversibly upon detergent treatment15,16 and because in vitro reconstitution of CsmA and BChl a cannot reconstitute the baseplate structure17.
The novel approach in the present work to structural studies of the baseplate became possible with a bchK mutant of Cba. tepidum that forms modified chlorosomes, termed carotenosomes, with a fully functional baseplate formed by CsmA protein and BChl a pigment but lacking self-assembled BChl c antenna elements15. Removing the vast excess of BChl c molecules (100,000–200,000 per chlorosome) unmasked the baseplate allowing direct studies of the baseplate in vivo. Despite the simplicity of the carotenosomes, the functionality of the organelles; however, remains intact as the bacteria are able to grow photosynthetically using BChl a and carotenoids as the sole antenna pigments. It should be noted that while BChl c is nonessential for the survival of Cba. tepidum, removing CsmA and thus the baseplate cannot give viable mutants18. Initially, we presented a liquid-state NMR structure of CsmA in organic solution19 and later extended the investigation with solid-state NMR resonance (ssNMR) assignments and secondary structure information20 for the CsmA peptides residing in situ in the baseplate of the carotenosome15.
Finally, here we conclude the structural characterization of the CsmA baseplate by presenting the high-resolution structure of the CsmA carotenosome baseplate. ssNMR data provide structural information in terms of distances and dihedral angle constraints. However, due to the local nature of these constraints, it was not possible to calculate the structure of the baseplate using these constraints alone. Therefore, the ssNMR data was complemented with a 3D density model derived using cryo-electron microscopy (cryo-EM) providing constraints for the global structure of the baseplate. Due to considerable variation in the quaternary structure of the carotenosomes (different lengths and curvatures, see below) it was only possible to derive a three-dimensional (3D) density model of medium-low resolution. Previously, ssNMR and microscopy data have been combined for high-resolution structure determination of supramolecular assemblies21,22,23,24. Furthermore, the unique composition of chlorosome complexes containing aggregates of bacteriochlorophyll molecules provide unique opportunities for near infrared spectroscopy, which is highly sensitive to ligand conformations, for comparing experimental data with structure-based ab initio calculated spectra25,26,27. Here we derive structure constraints and validation of the structure in terms of orientation between BChl a pigments. We compare the observed and ab initio structure using back-calculated data from absorption spectra, linear dichroism (LD) and circular dichroism (CD) in both isotropic and anisotropic phase (ACD, oriented samples).
Structure calculation of highly symmetric protein aggregates represents a great challenge. Although rotational and translational symmetries can be modelled in standard software packages, such as Xplor-NIH, using a symmetry potential to equal pairs of distances28, this is in practice problematic, due to issues with ineffective conformational sampling caused by high-energy barriers between different symmetric conformations. The problem can be addressed by implicit modelling of symmetry-related molecules and possibly explicit variation of parameters describing the symmetry as implemented for more simple and specific symmetries29,30,31,32. However, we did not find software suitable for the specific symmetry of the CsmA baseplate, and therefore we developed new software, GASyCS, for calculating the structure of highly symmetric oligomeric structures. GASyCS uses a genetic algorithm framework33,34 to search global conformational space and optimizes the structure following a basin hopping strategy35 (Supplementary Methods).
Characterization of the overall structure of the carotenosome
Chlorosomes, located at the intracellular side of the cytoplasmic membrane in Cba. tepidum, appear as small oval signatures as seen in a thin section image (Fig. 1c). Freeze-fracture imaging of Cba. tepidum bacteria reveals chlorosomes with a noticeably repeating striated signature, which earlier was also observed for Chloroflexus (Cfx.) aurantiacus and Chlorobium limicola13,14. The periodic flat structure represents the antenna baseplate system, which has been in focus of the present study (Fig. 1d and Supplementary Figs 1 and 2). As illustrated schematically in Fig. 1a, the baseplate is a part of the chlorosome, containing a varity of components, including lipids, proteins, carotenoids and other pigment molecules. The corresponding organization of the reduced number of components in the variant chlorosome, called the carotenosome, is visualized in Fig. 1b. To clarify, whether the baseplate remains intact after the bacterial mutation, freeze-fracture EM was used for careful examination of both specimens. The striated area, depicted for the original (non-mutated) chlorosomes (Fig. 1d) and for a bchK mutant cell (Fig. 1e) establishes the similarity between the chlorosome and carotenosome baseplates. Indeed, this would be the expected situation in terms of organelle functionality, since the function of the carotenosome is independent of the presence of BChl c and dependent on BChl a molecules.
Further, isolated carotenosomes have been studied by transmission EM using both negatively stained and ice-embedded samples. The sample quality in conjunction with the overall shape and size of the species was addressed by negative-stain microscopy, while the structural information of the long-range organization of the CsmA protein by cryo-EM. The carotenosomes studied by negative stain EM, reveal shape variations ranging between 60–80 nm in length and 40–80 nm widths, some with more round shape and some more elongated, but generally smaller and more irregular than the chlorosomes as seen by negative stain EM and other transmission electron microscopy and atomic force microscopy techniques reported earlier15,36 (Fig. 1f and Supplementary Note 1).
Generation of a 3D density model for the baseplate structure
Cryo-EM data of the ice-embedded isolated carotenosomes is, on one hand, in agreement with negative stain data and, on the other hand, reveals more detailed molecular complex structure. Captured images clearly show supramolecular organization of the protein rows, originating from the baseplate (Fig. 2a–c). From 270 images, 1790 individual baseplate views from different orientations were manually selected using the e2boxer.py in EMAN2 software package37 and analysed using single particle analysis. We observed three most characteristic signatures in the cryo-EM pictures (Fig. 2d–f): a line of equidistant ‘beads’, a single stripe and a weak-contrast mesh-like pattern. Further, chosen classes were subjected to distance analysis, using power spectra (Fig. 2d–f, insets). Repeat distances for the beady view from different class-averages were very well conserved at 33 Å (which is consistent with the previously reported results38,39). The thickness of the baseplate, which can be defined from the single stripe and beady views, shows variation in a range of 41–47 Å (Fig. 2a,b,d,e), depending on the view angle. Here, the estimation for a lattice constant was 33 Å. A top view of the baseplate revealed repeating distances of 33.8 and 35.7 Å with an 81° angle to each other, which at closer examination discloses the checkered 2D pattern consistent with the top view of the refined structure (Fig. 2f).
An initial 3D electron density model for the baseplate (Fig. 2j) was generated revealing the baseplate as an array of aligned rod-like structures with ca. 33–35 Å spacing (compared to the 33 Å in the class-averages) and a thickness of 41–47 Å (which is also consistent with the class-averages data). After the calculation of the initial model, the reconstruction was refined using the set of 1790 individual particles aligned first in Sparx40 software and subsequently in Euler angle space using Strul41. A new 3D model was calculated using weighted back-projection in Spider42 (Fig. 2g–i). The final reconstruction density map is presented in Fig. 2j. The resolution estimate is 19.1 Å (FSC=0.143 criteria, Supplementary Fig. 3b and Supplementary Methods).
Structural constraints from ssNMR
From our previous solid-state NMR investigations, we could, based on secondary chemical shift data, conclude that the CsmA monomers in situ in the baseplate display a largely α-helical structure encapsulated into a fully symmetric baseplate super-structure20. Furthermore, we conclude now, based on analysis of H25 side chain chemical shifts (Supplementary Note 2) that BChl a ligands are coordinated 1:1 via H25. CD spectra analysis and ab initio calculations (Supplementary Note 2) demonstrate that the basic building block of the baseplate structure is a symmetric CsmA dimer, which is translated along two perpendicular directions to form a two-dimensional lattice structure (Fig. 3b).
To provide detailed information about the structure, a solid-state NMR DARR 13C–13C 2D spectrum with a long (200 ms) mixing time was acquired (see Methods). Cross peaks in the spectrum are signatures of close proximity between two carbons assigned to the corresponding chemical shifts. Cross peaks with chemical shift overlapping with the carotenoid and/or lipid ranges were not used. But nonetheless, due to unique chemical shift regions for certain protein signals, it was possible to exploit resonances corresponding to C′ and Cα for all residues and, in addition, Cβ from T and S residues, which appear in the spectrum separately from the carotenoids signals (Supplementary Fig. 4a). For each cross peak all assignment possibilities consistent with the assigned chemical shifts within a window of 1.35 p.p.m. around the peak position were considered (that is, with maximum distance of 0.675 p.p.m., comparable to typically observed line widths of ca. 0.8 p.p.m. measured as half width at half height). Representative excerpts of the DARR spectrum is shown in Fig. 3c with the most likely assignment indicated for each peak. All constraints were implemented as ambiguous distance constraints corresponding to finding the conformation that optimizes the sum of contributions to the cross peak intensity from all considered carbon pairs. This implementation accounts for both all intra-chain contacts but also for all the possible inter-chain contacts for the corresponding carbon atom pair. A total of 60 non-trivial distance constrains were used for the calculation and, in addition, 88 dihedral angle restraints derived using TALOS+(ref. 43) from the assigned chemical shifts were used to restrain the backbone conformation.
Constraints on the pigment orientation from LD, CD and ACD
Low temperature CD spectra (Fig. 3e) were acquired for the carotenosomes in the near infrared region, since the absorbance and corresponding CD signal in that region is highly sensitive both to the local geometry and the overall structure of the baseplate. Further constraints were derived by measuring linear dichroism (LD) and anisotropic CD (ACD) spectra from macroscopically aligned carotenosomes at room temperature (Fig. 3f). The LD and ACD spectra constrain the orientation angles of the transition dipole moments contributing to the absorption and CD bands, respectively (Supplementary Note 3 and Supplementary Fig. 5, which also includes spectra for the visible light region).
Calculation of the CsmA-BChl a baseplate structure
The structure of the CsmA-BChl a baseplate was calculated in four phases, using a combination of all the available experimental data, in each phase calculating a number of structure models for use in the next phase: (i) monomer structure calculation (ii) global structure search (iii) candidate filtering and (iv) structure refinement. In the first phase candidate monomer structures were calculated based on the TALOS+ derived backbone angle constraints. These monomer structures were used as starting points for the second phase where the monomer structures were rotated and translated in a configuration, which preserves the full symmetry, that is, in the symmetry constraints space (Supplementary Information and Methods). The structure candidates having the lowest energy were further refined using Xplor-NIH and distance similarity constraints together with non-strict crystallographic symmetry44 to enforce symmetric conformation applying to both the ambiguous distance constraints and the dihedral angle constraints derived using TALOS+ producing a large set of different candidate baseplate structure models. In the third phase, as a filtering step, CD spectra were back-calculated using quantum chemical methods45,46 based on the above candidate structural models (see Methods and Supplementary Methods) and compared with the observed spectra rejecting candidates models for which the spectra did not match (see below and Methods). The cryo-EM density was used to further reject a subset of the models inconsistent with the cryo-EM density model (see example of rejected models and the corresponding force field energies in Supplementary Figs 6 and 7 and Supplementary Fig. 3a). In the fourth and final phase of the structure determination, the cryo-EM density data was included in the NMR structure calculation protocol to refine the final structure (Supplementary Methods and Methods). Finally, to validate the final carotenosome baseplate structure, isotropic low temperature CD and anisotropic CD spectra were back-calculated revealing a close agreement with the observed spectra (Fig. 3e,f). Hence, by combining all types of experimental constraints: local high-resolution structural information from solid-state NMR, orientation between BChl a pigments from isotropic and anisotropic CD, LD, ab initio calculations, and global structural information from cryo-EM, together with the symmetry information, it was possible to derive a unique and precise structure for the CsmA-BChl a baseplate.
The final structure shown in Fig. 4 has the lowest total energy and fitted all experimental data very well and significantly better than all the other competing models (Supplementary Fig. 6 and 7 and Supplementary Fig. 3a) revealing a good agreement with all solid-state NMR constraints, cryo-EM density (judged by the overlay with the density model in Fig. 3g,i,j), isotropic CD (Fig. 3e), anisotropic CD spectra (Fig. 3f) and LD spectra (Supplementary Fig. 5) (see Methods, Supplementary Methods and Supplementary Note 4). Some of the inter-chain distance constraints found for the CsmA baseplate structure are visualized in Fig. 3d defining the local structure with high precision. The global organization of the baseplate structure is also well determined through the relative orientation between BChl a pigments, which can be deduced from the CD spectrum analysis (see Methods) and through agreement with the cryo-EM density model. Restraint and structure statistics is provided in Table 1.
Description of the baseplate structure
In accord with indications from earlier studies, the CsmA monomers form helical structures with a slight curvature20. The data presented here reveal that the helices form rods by head-to-tail translational association in a tight interface allowed by the small amino acids of in particular G15, G39 and A12 flanked by other relatively small polar amino acids such as T8, S35 and N46 (Figs 3d and 4c). The helices are amphipathic (Fig. 4a) leading to formation of a hydrophobic and a hydrophilic interface (Fig. 4b,d,e). The hydrophilic interface pairs the side of the helices with electrostatic interactions through oppositely charged side-chains (Fig. 4c). The hydrophobic interface is further stabilized by symmetry-related packing of aromatic rings of F7/F7* and F18/F18* and clustering of other hydrophobic residues (Figs 4d,e and 5a). In particular, hydrogen bonds between side chains are formed for R42/E23 and R16/E27 and salt-bridges for R16/E23 and K38/E27 (Fig. 5b) and within the same rod for R45/E23 and R42/E19. The putative salt-bridges are supported by narrow lines in the solid-state NMR spectra for the side-chain C′ for these negatively charged residues. Since the helixes are tilted slightly relative to baseplate plane, the axis of rotation parallel to the baseplate normal leads to a small angle (ca. 25°) criss-cross pattern of the helices (Fig. 3b,k), as also observed in another helical oligomeric structure47. Due to this symmetry, the only inter-chain contacts are between residues close in sequence (for example, L32 and F33*) and a homo-interface pairing, packing the BChl a ligand coordinated to H25 tightly with hydrophobic side-chains such as L11, A14, F18, M21, W26, V29, L36 and I43 (Fig. 4a).
The BChl a ligand coordinates to the side-chain of H25 and form pairs, which are almost co-planar orthogonal to the plane of the baseplate and with the centres separated by ca. 15 Å along the rod axis. This geometry is consistent with the LD spectrum, the isotropic and the anisotropic CD spectra (Fig. 3e,f and Supplementary Fig. 5). In contrast, different orientations or a closer contact would lead to a totally different CD spectrum with additional CD bands, different rotation strengths values or mirror image CD shapes as compared with the spectrum, shown in Fig. 3e (Supplementary Note 2 for further details).
The symmetry of the baseplate defines two different sides of the baseplate. One, believed to face the inner side of the carotenosome (Fig. 4a,c), contains the phytyl tails of the BChl a ligands together with the N-terminal part and one side of the helix. This inner side is decorated by hydrophobic side chains, which might form anchoring points for carotenoid molecules and the tails of the esterifying alcohols of BChl c in the wild-type chlorosome. The other outer side consists of the C-terminal part of the helix as shown before48 and another side of the helix containing three aromatic residues, W26, F33 and Y48 and some hydrophilic side chains, which might constitute the binding site for the FMO complex49,50.
In studies on chlorosomes by cryo-EM, striations parallel to the long axis of the chlorosomes were observed and assigned to rods or lamellae formed by BChl c (refs 3, 39, 51, 52). Interestingly, perpendicular striations and other features (as in Fig. 1d,e) that could be assigned to the baseplate were also detected in both Cfx. aurantiacus and Cba. tepidum chlorosomes3,39,51,52. For the latter organism, work by Oostergetel et al.51, has shown a repeat distance of 33 Å from rows of protein similar to our beady view (Fig. 2a) as well as a from a side view and with an angle of 40° with the long axis of the chlorosome. In the carotenosomes lacking BChl c rods with such an angle cannot be formed.
Compared with the Cba. tepidum chlorosome with a thickness of 350–600 Å (refs 15, 39), chlorosomes from Cfx. aurantiacus, are thinner with 100–200 Å (ref. 39), hence baseplates can be clearly seen39,52 in particular in the high-light grown27 organelles. In agreement with our observations, it was argued that the baseplate building block is ca. 33 Å in diameter39.
For the carotenosomes an approximate thickness of the baseplate could be obtained (Fig. 2d,e), a measurement obscured by the BChl c interior in the chlorosomes. The baseplate thickness of 44±3 Å (obtained from 14 distance measurements in EM power-spectra (Supplementary Fig. 8) compares well with the thickness of the entire carotenosome, measured by atomic force microscopy to 43±8 Å (ref. 15). Altogether, cryo-EM results point to a baseplate structure conserved between at least these two species with a lattice of 33 Å in both directions in the plane and about 44 Å thick.
Earlier studies combining ssNMR constraints and microscopy-derived density models21,22,23,24 profited on a larger number of distance constraints and a density model with a higher resolution. However, we stress out here that the present study is performed in the context of the full carotenosomes where both lipids and carotenoids are abundant in the native environment in which some variations is seen for the quaternary structure of the carotenosomes. As a natural result, this true variation is reflected in the precision of the experimental data, but on the other hand, the accuracy of the data is not biased by purification or other non-native manipulations of the baseplate system. The carotenosomes are prone to stick to each other and to take preferred orientations complicating the reconstruction process and the resulting resolution. To possibly get better cryo-EM and ssNMR data, one could remove carotenoids and quinones not necessary for an intact baseplate. The carotenosomes may contain loosely bound carotenoids that would allow removal by a hexane wash similar to hexane washing of chlorosomes from Cba. tepidum53,54. An alternative procedure (work in progress) could be to genetically eliminate all carotenoids, because carotenoids appear not to be essential for the structural integrity of the baseplate structure55. Another approach to possibly obtain better resolution through an unambiguous viewing angle for cryo-EM could be to orient the carotenosomes on a functionalized lipid surface56, followed by acquisition of tilted image pairs. However, through the application of complementary restraints from LD, CD and ACD together with ab initio calculation, and by following our systematic procedure for searching conformational space for the symmetric structure, it was still possible to derive a reliable high-resolution structure of the CsmA baseplate.
In our derived structure for the CsmA baseplate the BChl a rings are almost coplanar and far apart with the shortest Mg–Mg distance of 15 Å (the second shortest is 23 Å) whereas for the LH2 and LH1 structure, the BChl a rings are stacking (Mg–Mg distance is ca. 8 and 9 Å, respectively)7,8. In the CsmA baseplate structure the BChl a’s with 15 Å intra-molecular distance form dimer units that are weakly coupled to each other as our anisotropic CD data suggest (Supplementary Methods for more details). This is further supported by the recently published hole-burning study showing that dimeric character dominates in spectroscopic properties of baseplates from Cba. tepidum57. Conversely, in the structure determined by solid-state NMR of BChl c aggregates, the porphyrine rings were shown to stack closely forming long rods3. This hints to a difference in the mechanism of energy transfer where energy is not transferred within the CsmA baseplate but along the BChl c rods, directly through the baseplate, which serves as a gate to transfer the energy to the FMO complex. We note that the H25 side chains for the dimer point away from each other but that light could possibly induce a conformational change in the geometry bringing the BChl a rings closer together by a rotation around bonds in H25 possibly facilitating more efficient energy transfer to FMO.
Many residues are conserved among different CsmA orthologous peptides in different photosynthetic species (Fig. 5c for visualisation and Supplementary Table 2). In particular, residues G24/H25/W26 near the binding site for BChl a are identical but also M21 and I17 one and two turns away, respectively, making hydrophobic interactions with BChl a. Several residues in the C-terminal end are either entirely conserved or strongly similar (N44/N46 and I43/R45/Y48, respectively), which could indicate interaction with the FMO protein as demonstrated previously48,49. Furthermore, we note that several residues in the hydrophilic groove in the CsmA baseplate (Fig. 4c) show strong similarity, in particular, negatively charged residues E19(D), E23(Q) and D34(E/Q) and positively charged residues R16(Q), and R45(Q) (where letter in the bracket denotes the alternative amino acid in other homologous species). As discussed above we observe putative salt-bridges between oppositely charged residues between residues from these two groups both within a rod and bridging two rods. Therefore, we argue that these interactions are important for the structural integrity of the baseplate. This is supported by the zero-length cross-linking results obtained for chlorosomes58 indicating that oppositely charged side chains on different monomers act as bridging interactions to form multimers suggesting a mechanism for the self-assembly of CsmA monomers in a baseplate structure. Conversely, the aliphatic residues in the less densely packed part of the hydrophobic groove and in the open part of the hydrophilic groove are not conserved among all species. We speculate that these more flexible regions could bind different carotenoid molecules. Finally, C-terminal residues, 49–59 have low degree of homology. This is understandable, since these residues are unstructured for the CsmA baseplate and hang as loose ends at the outer side of the baseplate. This exposure of the C-terminal in the structure is also supported by the finding that C-terminal residues are cleaved off proteolytically for this Cba. tepidum system and for most of the other homologous sequences discussed above48.
In this study, we have presented the first high-resolution 3D structure of the protein-pigment baseplate antenna from Cba. tepidum in its native in situ heterogeneous full organelle environment. This was accomplished through a structure characterization protocol, which might serve as inspiration to the study of other similar challenging systems, using atomic level structural information from solid-state NMR combined with global information from cryo-EM on the protein organisation and with information from isotropic and anisotropic CD spectroscopy on the orientation of the BChl a pigments. Our detailed structural study provides an important basis for further insight into an extremely efficient light-harvesting system. For example, our results reveal how the BChl a ligand plays an integral role in the self-assembly of CsmA and the atomic-resolution structure allows the mechanism of energy transfer in the antenna system to be studied in detail. The unusual structure also provides an inspiration for constructing artificial light-harvesting devices where the baseplate structure could acts as a template in an arrayed construction. Moreover, our structure can be used further for understanding CsmA–FMO complex interaction, which is fascinating regarding the recent idea of exploiting FMO in quantum computing59.
Growth of Chlorobaculum tepidum bchK mutant. Cells of fully 13C,15N-labelled mutant bacteria were grown in closed 1 or 2 l bottles in modified medium using the procedures described by Frigaard et al.15. Uniform 15N labelling was obtained by substituting the ammonium acetate for an equimolar amount of sodium acetate in the original CL medium and by using 15NH4Cl as the sole nitrogen source. Uniform 13C labelling was performed using substituting the sodium bicarbonate and sodium acetate in the original CL medium for the fully 13C-labelled substrate equivalents (NaH13CO3 and Na13CH313COO).
Isolation of carotenosomes. The procedure was performed as described by Frigaard et al.15. In brief, the cell pellet of a 2 l cell culture was resuspended in 50 ml of isolation buffer (50 mM Tris, 2 M NaSCN, 10 mM sodium ascorbate, 5 mM Na2EDTA, 0.5 mM phenylmethanesulfonyl fluoride, 1 mM 1,4-dithiothreitol, pH 8.0). In order to disrupt the cells the suspension was passed through a French press. Cell extract was clarified by centrifugation (13,000g, 20 min, 4 °C) and the supernatant was supplemented with 20% (w/v) sucrose. The cell extract with the sucrose was transferred to ultracentrifuge tubes and overlaid with isolation buffer containing 5% sucrose. The tubes were centrifuged at 270,000g for 2 h at 4 °C. The carotenosomes after centrifugation appeared as a dark-orange band floating on top of the solution. This band was removed and the carotenosome preparation was dialysed against water for at least 24 h prior to freeze-drying.
Solid-State NMR spectroscopy. Roughly 36 mg of freeze-dried, fully-labelled 13C,15N carotenosomes sample were packed into a 4 mm ZrO2 rotor. All NMR spectra were recorded on a BrukerAvance-II 700 MHz (16.4 T) NMR spectrometer equipped with a standard 4 mm triple-resonance magic-angle spinning (MAS) probe. All spectra were measured using 10.5 or 12 kHz spinning, 32.45 ms acquisition with 85 kHz SPINAL-64 (ref. 60) decoupling. Uniformly 13C,15N-labelled L-alanine was used as an external reference. Bruker Topspin was used for data processing and Sparky61 for data analysis.
Different combinations of 2D and 3D spectra were acquired for data analysis. In detail, 2D homonuclear 13C-13C DARR, heteronuclear NCA and NCO experiments with broad-banded version as well as 3D NCACX, NCOCX, CONCA, CANCO spectra were obtained. Details for those experiments have been described previously20. The 2D homonuclear 13C–13C DARR62 correlation spectrum (shown in Supplementary Fig. 4a) used for obtaining the long-range constraints, was recorded using a 200 ms mixing time. The spectrum was acquired at ca. 7 °C using 10.5 kHz MAS, a recycling delay of 3 s, 200 ppm spectral width in the indirect dimension with 400 increments and 92 scans per increment. The signal-to-noise ratio for the strongest peptide peaks were around 50.
CD, ACD and LD
Isotropic CD spectra were acquired at both room temperature and 77 K using a Chirascan-plus spectrometer (Applied Photophysics Ltd, United Kingdom) with a 2-nm spectral bandwidth. The sample was diluted with glycerol (1:2 volume ratio) to obtain a good optical quality glass sample at low temperatures. The sample was placed in a temperature-controlled Optistat DN liquid nitrogen cryostat (Oxford Instruments, United Kingdom). The optical density in the 800-nm absorption peak was ∼0.3 at 77 K (5 mm optical path). CD spectra were back-calculated using ab initio and density functional molecular orbital methods63 applying exciton theory with calculated normal mode vibrations and calculated Franck-Condon (FC) factor (see Supplementary Methods for more details)64.
LD and ACD spectra were obtained from macroscopically aligned carotenosomes. To this end the samples were fixed in 5% polyacrylamide gel cubes (1 cm), diluted to optical density of 1 at 444 nm or 800 nm, for measurements in the visible and near-infrared region, respectively. The samples were oriented by compressing the gels uniaxially by a factor of 1.7. The particles are thus oriented preferentially with their smallest dimension parallel to the compression direction. Room temperature LD and ACD spectra were recorded using a Jasco 815 spectrometer. For LD measurements the gels were placed with the compression axis perpendicular to the beam propagation (‘edge’ configuration), with linearly polarized light parallel or perpendicular to the compression axis. For ACD measurements the gels were placed with the compression axis parallel to the measuring beam (‘face’ configuration). In this configuration LD is zero (see Supplementary Methods for more details).
Freeze-fracture. Fixed bacteria were equilibrated overnight in 25% glycerol at 4 °C, attached to the gold holders, and snap frozen in Freon 22 cooled in liquid nitrogen. Cba. tepidum bacteria were fractured in a Balzer’s freeze-fracture apparatus (BAF 300; Balzers) at −100 °C. Samples were immediately rotary shadowed at an angle of 25 °C with 320 Hz thick layer of the platinum and carbon replicated 5 × 1 s. The replicas were cleaned overnight in 40% chrome oxide, rinsed with water, and analysed with a CM100 transmission electron microscopy (TEM) microscope (FEI) (Normal observations at 80 kV). Images were recorded by CCD camera 1 K MegaView III from (Olympus Soft Imaging Solutions), image handling by AnalySiS from the same company. A calibrated magnification of × 92,000 was used.
Electron microscopy. The grids used were 300 mesh Cu grids, coated with integral carbon and glow-discharged for 30 s. Samples for EM in negative stain and vitreous ice were prepared by adding 100 μl of 0.1 M cacodylate buffer and 50 μl of the Cba. tepidum spinning down the mixture with airfuge 273,000g in 10 min × 2. After removing the supernatant, the pellet was suspended with up to 200 μl cacodylate buffer. This procedure was repeated 3 times to get rid of sucrose.
Specimens for the negative staining EM were prepared by putting 5 μl of the specimen on EM grids and staining with 1% of uranyl acetate in aqueous solution for 1 min EM images were acquired with a FEI CM100 microscope operated at 80 kV. Data were collected at a magnification of × 64,000 with the CCD camera 1 K MegaWiev III from Olympus Soft Imaging Solutions. Image processing was carried out by AnalySiS from the same company.
Cryo-EM samples were prepared by vitrifaction in a FEI Vitrobot Mark II (TM). Sample of 10 μl was transferred to quantifoil R 2/4 grids, which have been glow-discharged for 30 s. Excess liquid was blotted off for 1 s and the sample was vitrified in liquid ethane slush. EM was performed at liquid nitrogen temperature on a FEI Titan-Krios Cryo-EM microscope operated at 300 kV acceleration voltage. Images were acquired under low-dose conditions (maximal dose: 5–8 e Å−2) at a magnification of 59,000 with a Gatan US4000 4k*4k CCD camera and FEI EPU software.
Cryo-EM and calculation of 3D density model
The density model was calculated from a total of 1,750 individual extracted particles, yielding 48 class-averages (Supplementary Fig. 8) as performed with EMAN2 software. An initial model was obtained from a minimal set of three characteristic views using EMAN2 (ref. 37). A refined 3D model was calculated by aligning 1,750 individual particles using Strul41 to obtain a 3D reconstruction of these particles, using weighted back-projection in Spider42. Cryo-EM images were acquired at liquid N2 temperature under low-dose conditions (<5–8 e Å−2) at a magnification of 59,000 with a Gatan US4000 4k*4k CCD camera and FEI EPU software. All details can be found in the Supplementary Methods.
Calculation of the baseplate structure
The structure of the CsmA baseplate was calculated applying a combination of solid-state NMR, Cryo-EM and isotropic and anisotropic CD through four phases ((i–iv)) using both existing software and new purpose-developed software (see below). An overview of the four phases is provided in Supplementary Table 3. (i) In the first phase, a set of candidate starting structures for the CsmA monomer with one BChl a coordinated to H25 was calculated using Xplor-NIH65 producing 368 structures, and the 64 with lowest energy were kept for the next phase. Standard simulated annealing procedures were used for this calculation, with a relatively low annealing temperature of 300 K to increase structural heterogeneity within the structure ensemble. The only source of experimental data used in this step was the constraints for the backbone dihedral angles inferred from the chemical shifts using TALOS+(ref. 43). Geometric force field parameters and partial charges for BChl a were taken from the Xplor-NIH parameters for Haem ligands in the similar skeleton part of BChl a, or taken from an ab initio calculation of BChl a63.
(ii) In the second phase, structure candidates for the full baseplate structure were calculated using our software, GASyCS (structure calculation using a Genetic Algorithm in Symmetry Constraints Space). The new software is described in Supplementary Methods (Supplementary Fig. 10). The monomer structure and the ambiguous distances constraints derived from a solid-state NMR DARR (200 ms mixing time, temperature set to 293 K) spectrum together with constraints derived using chemical shifts together with the shAIC potential66 was used to derive the structure in conjunction with constraints imposed by the symmetry of the baseplate. The spectra were acquired on a widebore Bruker Avance-II 700 MHz (16.4 T) spectrometer (see Supplementary Methods for more details). In addition, a distance constraint keeping the Mg-Mg distance between BChl a units below 15 Å was used along with a constraint ensuring the BChl a ring normal to be approximately orthogonal to the baseplate normal were used based on initial observations in isotropic CD spectra (see Supplementary Note 2). The 128 baseplate structure candidates having the lowest energy were further refined using Xplor-NIH and distance similarity constraints to enforce symmetric conformation using Xplor-NIH again. Here both the ambiguous distance constraints and the dihedral angle constraints derived using TALOS+ were used. This time a more advanced force field was applied using a classical Lennard-Jones potential for the Van der Waals interactions and a Coulombic force repulsive/attractive term for the electrostatics.
(iii) In the third phase, the 32 structural models from the above phase with the lowest hybrid constraint and force field energy were selected. The isotropic CD spectrum in the far-infrared region was back-calculated based on the structure. The structures having a similar shape as judged by a similar sign and a similar position for the sign inversion point were kept for the final refinement phase. The structures consistent with CD were overlaid with the cryo-EM density model using Chimera67.
(iv) In the fourth phase, the seven structural models from the previous phase compatible with CD and fitting the cryo-EM density best were selected. Xplor-NIH was used to refine the structures with a protocol similar to phase III, but this time using a simple repulsion term for the electrostatics. The cryo-EM density data was included in the final refinement applying the probDistPot potential68 with the cross-correlation option to optimize agreement with the cryo-EM derived density. Prior to the refinement, the structure was systematically translated and rotated to optimize initial overlap with cryo-EM density. After the refinement, one of the structural models produced structure ensembles with significantly lower energies compared with other ensembles (Supplementary Fig. 3a), and this model was regarded as having the correct fold. The structure calculation statistics are described in Supplementary Note 3. To increase convergence, and to iteratively further refine the structure, the same refinement was repeated using the best structure from the previous step. The CD spectrum was back calculated for the 10 (out of 80) structures with lowest energy and the structure with the best agreement with the CD spectrum was regarded as the final structure. The heavy atom coordinate r.m.s.d. for these 10 structures were 1.41 Å for residues 6–48 and BChl a.
Finally, the structure was validated; the anisotropic CD spectrum at room temperature and the isotropic CD spectrum at 77 K were also simulated using more detailed theory (as described in Supplementary Methods) and a good agreement between observed and predicted values was obtained (Fig. 3e, r.m.s.=0.0440 with normalized intensity), hence, validating the structure.
The atomic coordinates of final structure have been deposited in the Protein Data Bank under accession number 5LCB. The NMR chemical shifts have been deposited in the Biological Magnetic Resonance Data Bank, entry 34012, and the cryo-EM density model in the EMDB database under accession number, EMD-4033.
The software, GASyCS, for efficient geometry optimization of highly symmetric oligomeric structures, is available in Supplementary Information as Supplementary Data files. The data that support the findings of this study are available from the corresponding author on request.
How to cite this article: Nielsen, J. T. et al. In situ high-resolution structure of the baseplate antenna complex in Chlorobaculum tepidum. Nat. Commun. 7:12454 doi: 10.1038/ncomms12454 (2016).
Bryant, D. A. & Frigaard, N. U. Prokaryotic photosynthesis and phototrophy illuminated. Trends Microbiol. 14, 488–496 (2006).
Frigaard, N.-U. & Bryant, D. Chlorosomes: antenna organelles in photosynthetic green bacteria. Microbiol. Monographs, Complex Intracellular Structures in Prokaryotes 2, 79–114 (2006).
Ganapathy, S. et al. Alternating syn-anti bacteriochlorophylls form concentric helical nanotubes in chlorosomes. Proc. Natl Acad. Sci. USA 106, 8525–8530 (2009).
Egawa, A. et al. Structure of the light-harvesting bacteriochlorophyll c assembly in chlorosomes from Chlorobium limicola determined by solid-state NMR. Proc. Natl Acad. Sci. USA 104, 790–795 (2007).
Tronrud, D. E., Schmid, M. F. & Matthews, B. W. Structure and X-ray amino acid sequence of a bacteriochlorophyll A protein from Prosthecochloris aestuarii refined at 1.9 A resolution. J. Mol. Biol. 188, 443–454 (1986).
Schirmer, T., Bode, W. & Huber, R. Refined 3-dimensional structures of 2 Cyanobacterial C-Phycocyanins at 2.1 and 2.5 a Resolution—a Common Principle of Phycobilin-Protein Interaction. J. Mol. Biol. 196, 677–695 (1987).
Roszak, A. W. et al. Crystal structure of the RC-LH1 core complex from Rhodopseudomonas palustris. Science 302, 1969–1972 (2003).
Mcdermott, G. et al. Crystal-Structure of an Integral Membrane light-harvesting complex from photosynthetic bacteria. Nature 374, 517–521 (1995).
Liu, Z. F. et al. Crystal structure of spinach major light-harvesting complex at 2.72 angstrom resolution. Nature 428, 287–292 (2004).
Koepke, J., Hu, X. C., Muenke, C., Schulten, K. & Michel, H. The crystal structure of the light-harvesting complex II (B800-850) from Rhodospirillum molischianum. Structure 4, 581–597 (1996).
Jordan, P. et al. Three-dimensional structure of cyanobacterial photosystem I at 2.5 A resolution. Nature 411, 909–917 (2001).
Pedersen, M. O., Linnanto, J., Frigaard, N. U., Nielsen, N. C. & Miller, M. A model of the protein-pigment baseplate complex in chlorosomes of photosynthetic green bacteria. Photosynth. Res. 104, 233–243 (2010).
Staehelin, L. A., Golecki, J. R. & Drews, G. Supramolecular organization of chlorosomes (chlorobium vesicles) and of their membrane attachment sites in Chlorobium limicola. Biochim. Biophys. Acta 589, 30–45 (1980).
Sprague, S. G., Staehelin, L. A., DiBartolomeis, M. J. & Fuller, R. C. Isolation and development of chlorosomes in the green bacterium Chloroflexus aurantiacus. J. Bacteriol. 147, 1021–1031 (1981).
Frigaard, N. U. et al. Isolation and characterization of carotenosomes from a bacteriochlorophyll c-less mutant of Chlorobium tepidum. Photosynth. Res. 86, 101–111 (2005).
Bryant, D. A. et al. Candidatus Chloracidobacterium thermophilum: an aerobic phototrophic Acidobacterium. Science 317, 523–526 (2007).
Pedersen, M. O., Underhaug, J., Dittmer, J., Miller, M. & Nielsen, N. C. The three-dimensional structure of CsmA: a small antenna protein from the green sulfur bacterium Chlorobium tepidum. FEBS Lett. 582, 2869–2874 (2008).
Frigaard, N. U., Li, H., Milks, K. J. & Bryant, D. A. Nine mutants of Chlorobium tepidum each unable to synthesize a different chlorosome protein still assemble functional chlorosomes. J. Bacteriol. 186, 646–653 (2004).
Pedersen, M. O., Pham, L., Steensgaard, D. B. & Miller, M. A reconstituted light-harvesting complex from the green sulfur bacterium Chlorobium tepidum containing CsmA and bacteriochlorophyll a. Biochemistry 47, 1435–1441 (2008).
Kulminskaya, N. V. et al. In situ solid-state NMR spectroscopy of protein in heterogeneous membranes: the baseplate antenna complex of Chlorobaculum tepidum.. Angew. Chem Intl. Ed. Engl. 51, 6891–6895 (2012).
Demers, J. P. et al. High-resolution structure of the Shigella type-III secretion needle by solid-state NMR and cryo-electron microscopy. Nat. Commun. 5, 4976 (2014).
Fitzpatrick, A. W. et al. Atomic structure and hierarchical assembly of a cross-beta amyloid fibril. Proc. Natl Acad. Sci. USA 110, 5468–5473 (2013).
Habenstein, B. et al. Hybrid Structure of the Type 1 Pilus of Uropathogenic Escherichia coli.. Angew. ChemIntl. Ed. Engl. 54, 11691–11695 (2015).
Sborgi, L. et al. Structure and assembly of the mouse ASC inflammasome by combined NMR spectroscopy and cryo-electron microscopy. Proc. Natl Acad. Sci. USA 112, 13237–13242 (2015).
Pearlstein, R. M. Theory of the optical spectra of the bacteriochlorophyll a antenna protein trimer from Prosthecochloris aestuarii. Photosynth. Res. 31, 213–226 (1992).
Linnanto, J., Korppi-Tommopa, J. E. I. & Helenius, V. M. Electronic states, absorption spectrum and circular dichroism spectrum of the photosynthetic bacterial LH2 antenna of Rhodopseudomonas acidophila as predicted by exciton theory and semiempirical calculations. J. Phys. Chem. B 103, 8739–8750 (1999).
Linnanto, J. et al. Excitation energy transfer in the LHC-II trimer: a model based on the new 2.72 angstrom structure. Photosynth. Res. 87, 267–279 (2006).
Nilges, M. & Brunger, A. T. Successful prediction of the coiled coil geometry of the GCN4 leucine zipper domain by simulated annealing: comparison to the X-ray structure. Proteins 15, 133–146 (1993).
Bardiaux, B., van Rossum, B. J., Nilges, M. & Oschkinat, H. Efficient Modeling of Symmetric Protein Aggregates from NMR Data. Angew. Chem. Intl. Ed. 51, 6916–6919 (2012).
He, L. et al. Structure determination of helical filaments by solid-state NMR spectroscopy. Proc. Natl Acad. Sci. USA 113, E272–E281 (2016).
Shahid, S. A. et al. Membrane-protein structure determination by solid-state NMR spectroscopy of microcrystals. Nat. Methods 9, 1212–U1119 (2012).
van Ingen, H. & Bonvin, A. M. J. J. Information-driven modeling of large macromolecular assemblies using NMR data. J. Magn. Reson. 241, 103–114 (2014).
Mitchell, M. An Introduction to Genetic Algorithms MIT (1999).
Michalewicz, Z. Genetic Algorithms+Data Structures=Evolution Programs Springer (1996).
Wales, D. J. & Doye, J. P. K. Global optimization by basin-hopping and the lowest energy structures of Lennard-Jones clusters containing up to 110 atoms. J. Phys. Chem. A 101, 5111–5116 (1997).
Kudryashev, M., Aktoudianaki, A., Dedoglou, D., Stahlberg, H. & Tsiotis, G. The ultrastructure of Chlorobaculum tepidum revealed by cryo-electron tomography. Biochim. Biophys. Acta 1837, 1635–1642 (2014).
Tang, G. et al. EMAN2: an extensible image processing suite for electron microscopy. J. Struct. Biol. 157, 38–46 (2007).
Oostergetel, G. T. et al. Long-range organization of bacteriochlorophyll in chlorosomes of Chlorobium tepidum investigated by cryo-electron microscopy. FEBS Lett. 581, 5435–5439 (2007).
Psencik, J. et al. Structure of chlorosomes from the green filamentous bacterium Chloroflexus aurantiacus. J. Bacteriol. 191, 6701–6708 (2009).
Hohn, M. et al. SPARX, a new environment for Cryo-EM image processing. J. Struct. Biol. 157, 47–55 (2007).
Lindahl, M. Strul–a method for 3D alignment of single-particle projections based on common line correlation in Fourier space. Ultramicroscopy 87, 165–175 (2001).
Shaikh, T. R. et al. SPIDER image processing for single-particle reconstruction of biological macromolecules from electron micrographs. Nat. Protocols 3, 1941–1974 (2008).
Shen, Y., Delaglio, F., Cornilescu, G. & Bax, A. TALOS+: a hybrid method for predicting protein backbone torsion angles from NMR chemical shifts. J. Biomol. NMR 44, 213–223 (2009).
O'Donoghue, S. I. & Nilges, M. in Biological Magnetic Resonance 17, eds Krishna N. R., Berliner L. J. 131–161Kluwer (1999).
Pearlstein, R. M. in Chlorophylls ed. Scheer H. 1047–1078CRC Press (1991).
Davydov, A. S. Theory of Molecular Excitons McGraw-Hill (1962).
Gao, S. et al. Structural basis of oligomerization in the stalk region of dynamin-like MxA. Nature 465, 502–506 (2010).
Milks, K. J. et al. Chlorosome proteins studied by MALDI-TOF-MS: Topology of CsmA in Chlorobium tepidum. Photosynth. Res. 86, 113–121 (2005).
Pedersen, M. O., Borch, J., Hojrup, P., Cox, R. P. & Miller, M. The light-harvesting antenna of Chlorobium tepidum: interactions between the FMO protein and the major chlorosome protein CsmA studied by surface plasmon resonance. Photosynth. Res. 89, 63–69 (2006).
Huang, R. Y., Wen, J., Blankenship, R. E. & Gross, M. L. Hydrogen-deuterium exchange mass spectrometry reveals the interaction of Fenna-Matthews-Olson protein and chlorosome CsmA protein. Biochemistry 51, 187–193 (2012).
Oostergetel, G. T., van Amerongen, H. & Boekema, E. J. The chlorosome: a prototype for efficient light harvesting in photosynthesis. Photosynth. Res. 104, 245–255 (2010).
Psencik, J. et al. Structural and functional roles of carotenoids in chlorosomes. J. Bacteriol. 195, 1727–1734 (2013).
Psencik, J. et al. Structural and Functional Roles of Carotenoids in Chlorosomes. J. Bacteriol. 195, 1727–1734 (2013).
Frigaard, N. U., Matsuura, K., Hirota, M., Miller, M. & Cox, R. P. Studies of the location and function of isoprenoid quinones in chlorosomes from green sulfur bacteria. Photosynth. Res. 58, 81–90 (1998).
Frigaard, N.-U., Maresca, J. A., Yunker, C. E., Jones, A. D. & Bryant, D. A. Genetic manipulation of carotenoid biosynthesis in the green sulfur bacterium chlorobium tepidum. J. Bacteriol. 186, 5210–5220 (2004).
Dezi, M. et al. Binding, reconstitution and 2D crystallization of membrane or soluble proteins onto functionalised lipid layer observed in situ by reflected light microscopy. J. Struct. Biol. 174, 307–314 (2011).
Kell, A., Chen, J., Jassas, M., Tang, J. K. & Jankowiak, R. Alternative Excitonic Structure in the Baseplate (BChl a-CsmA Complex) of the Chlorosome from Chlorobaculum tepidum. J. Phys. Chem. Lett. 6, 2702–2707 (2015).
Li, H., Frigaard, N. U. & Bryant, D. A. Molecular contacts for chlorosome envelope proteins revealed by cross-linking studies with chlorosomes from Chlorobium tepidum. Biochemistry 45, 9095–9103 (2006).
Sarovar, M., Ishizaki, A., Fleming, G. R. & Whaley, K. B. Quantum entanglement in photosynthetic light-harvesting complexes. Nat. Phys. 6, 462–467 (2010).
Fung, B. M., Khitrin, A. K. & Ermolaev, K. An improved broadband decoupling sequence for liquid crystals and solids. J. Magn. Reson. 142, 97–101 (2000).
Goddard, T. D. & Kneller, D. G. SPARKY 3 University of California, (San Francisco).
Takegoshi, K., Nakamura, S. & Terao, T. 13C-1H dipolar-assisted rotational resonance in magic-angle spinning NMR. Chem. Phys. Lett. 344, 631–637 (2001).
Linnanto, J. & Korppi-Tommola, J. Structural and spectroscopic properties of Mg-bacteriochlorin and methyl bacteriochlorophyllides a, b, g, and h studied by semiempirical, ab initio, and density functional molecular orbital methods. J. Phys. Chem. A 108, 5872–5882 (2004).
Linnanto, J. M. & Korppi-Tommola, J. E. I. Modelling excitonic energy transfer in the photosynthetic unit of purple bacteria. Chem. Phys. 357, 171–180 (2009).
Schwieters, C. D., Kuszewski, J. J., Tjandra, N. & Clore, G. M. The Xplor-NIH NMR molecular structure determination package. J. Magn. Reson. 160, 65–73 (2003).
Nielsen, J. T., Eghbalnia, H. R. & Nielsen, N. C. Chemical shift prediction for protein structure calculation and quality assessment using an optimally parameterized force field. Prog. Nucl. Magn. Reson. Spectrosc 60, 1–28 (2012).
Pettersen, E. F. et al. UCSF Chimera–a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Gong, Z., Schwieters, C. D. & Tang, C. Conjoined use of EM and NMR in RNA structure refinement. PLoS ONE 10, e0120445 (2015).
Laskowski, R. A., Macarthur, M. W., Moss, D. S. & Thornton, J. M. PROCHECK—A program to check the stereochemical quality of protein structures. J. Appl. Crystal. 26, 283–291 (1993).
We acknowledge Prof. Poul Nissen, Interdisciplinary Nano Science Center, Denmark, for comments on the manuscript and retired Dr. Mette Miller, University of Southern Denmark for discussions related to the early stage project development. We acknowledge support from the Danish National Research Foundation (DNRF 59). J.M.L and M.R acknowledge supports from Estonia Research Council (Grant IUT02-28) and Estonian Science Foundation (Grant MJD262). P.H.L. and G.G. acknowledge support from Hungarian Scientific Research Fund (OTKA-PD 104530 and OTKA-K 112688).
The authors declare no competing financial interests.
Supplementary Figures 1-10, Supplementary Tables 1-4, Supplementary Notes 1-4, Supplementary Methods, Supplementary References (PDF 1828 kb)
Supplementary Data 1
Python code for GASyCS main program (TXT 109 kb)
Supplementary Data 2
Python code for sub program used by GASyCS (TXT 274 kb)
Supplementary Data 3
Python utilities code used by GASycs (TXT 44 kb)
Supplementary Data 4
Python code used by GASyCS (TXT 732 kb)
Supplementary Data 5
README instruction file - all datasets 1-5 should be combined into one single zip file. (TXT 1 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Nielsen, J., Kulminskaya, N., Bjerring, M. et al. In situ high-resolution structure of the baseplate antenna complex in Chlorobaculum tepidum. Nat Commun 7, 12454 (2016). https://doi.org/10.1038/ncomms12454
This article is cited by
Formation and function of bacterial organelles
Nature Reviews Microbiology (2020)
POTENCI: prediction of temperature, neighbor and pH-corrected chemical shifts for intrinsically disordered proteins
Journal of Biomolecular NMR (2018)
Two-dimensional electronic spectra of the photosynthetic apparatus of green sulfur bacteria
Scientific Reports (2017)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.