Asteroids provide fundamental clues to the formation and evolution of planetesimals. Collisional models based on the depletion of the primordial main belt of asteroids predict 10–15 craters >400 km should have formed on Ceres, the largest object between Mars and Jupiter, over the last 4.55 Gyr. Likewise, an extrapolation from the asteroid Vesta would require at least 6–7 such basins. However, Ceres’ surface appears devoid of impact craters >∼280 km. Here, we show a significant depletion of cerean craters down to 100–150 km in diameter. The overall scarcity of recognizable large craters is incompatible with collisional models, even in the case of a late implantation of Ceres in the main belt, a possibility raised by the presence of ammoniated phyllosilicates. Our results indicate that a significant population of large craters has been obliterated, implying that long-wavelength topography viscously relaxed or that Ceres experienced protracted widespread resurfacing.
It is generally accepted that planets formed by the accretion of smaller building blocks that are referred to as planetesimals (for example, ref. 1). In the present solar system, main belt asteroids between Mars and Jupiter represent the leftovers of the initial population of planetesimals. As such, main belt asteroids have long been considered to retain important clues about the formation and collisional evolution of planetesimals2,3,4,5.
Ceres, with a mean diameter of 939 km, is by far the largest object in the main belt. Earlier observations concluded that Ceres is likely partially differentiated6, a prediction confirmed by gravity field measurements by the Dawn spacecraft7. As a result, it is believed that Ceres’ accretion took place early in the solar system—possibly within a few Myr after condensation of the first solids—while radiogenic heating by26 Al decay was still extant. Therefore, it is likely that Ceres witnessed most of solar system evolution. Furthermore, because Ceres resides in a collisionally intense environment, impacts with nearby siblings are expected to be a primary evolutionary process for its outermost layers.
By virtue of its large cross section and ancient formation, Ceres offers a unique opportunity to study the earliest and most violent phase of collisional evolution by sampling craters whose sizes can largely exceed those on any other asteroid. As a comparison, the largest crater on 525 km asteroid Vesta—the second largest asteroid visited by a spacecraft—is ∼500 km across8. It is indeed commonly observed even among smaller asteroids that the largest recognizable crater approaches the size of the parent body9.
Ceres, however, lacks craters in excess of ∼280 km in diameter, and it is, as shown here, severely depleted in large craters down to 100–150 km in diameter. At the same time, large portions of Ceres’ northern hemisphere are saturated with craters 60 km in diameter or smaller. These findings are utterly incompatible with current collisional models over a wide range of assumptions, including a late implantation of Ceres into the main belt, a possibility suggested by the discovery of widespread ammoniated phyllosilicates10,11,12. We conclude that a significant population of large cerean craters has been obliterated beyond recognition over geological time scales, likely the result of Ceres’ peculiar composition and internal evolution. Finally, we present topographic evidence for the presence of one—possibly two— 800 km diameter depressions that may be relict impact basins from large collisions that took place early in Ceres history.
Global crater distribution
Ceres’ surface exhibits a plethora of impact craters, making cratering a primary geological and evolutionary process. The spatial density of craters >20 km, however, is very asymmetric and varies across the surface by a factor of ∼5, with the highest density found in the northern hemisphere (Fig. 1a). The latter have reached a level of crater spatial density, in the range 20–70 km, compatible with saturation. The global size-frequency distribution (SFD) for large craters (≥70 km) is shown in Fig. 1a. The spatial density of craters in the size range 70–80 km approaches that of the most heavily cratered terrain, found in the northern hemisphere. At crater sizes in the range ∼100–280 km, however, the global record of craters drops off, deviating significantly from predictions based on the current main belt asteroid SFD (Fig. 1a). The largest confirmed impact craters are Kerwan and Yalode, with approximate diameters of 280 and 270 km, respectively13.
Ceres’ depleted large crater population is also at odds with that of Vesta, despite their similar collisional environment14. Vesta exhibits a significant number of larger craters (≥150 km; ref. 8), including two basins >400 km (Fig. 1a). Topographic evolution models based on an ice-rich shell indicate that cerean craters could be partially or completely viscously relaxed when compared with rocky bodies, such as Vesta15. However, Ceres’ significant topography range (−7.3 km, +9.5 km) with respect to the 482 × 482 × 446 km reference ellipsoid7,16, locally high crater spatial densities (Fig. 1a) and high crater depth-to-diameter ratios17, argue against relaxation of an ice-rich shell as the primary cause for the lack of large craters.
Ceres collisional evolution
To quantitatively investigate the lack of large cerean craters, we ran a suite of Monte Carlo collisional models of Ceres assuming it had its current position in the main belt over the last 4.55 Gyr. The current estimated intrinsic collisional probability is Pi=3.55 × 10−18 per year per km2, assumed to be constant through time (see Methods section). However, the total number of main belt asteroids, Nmb(t), is expected to have been higher in the past18,19,20. As a result, the number of collisions per unit time per unit surface was also higher in the past, Ncoll(t)=(Pi/4π) × Nmb(t), where the factor 4π arises to express impacts per unit of target surface (see Methods section). Here, we apply a recent impact flux model calibrated at Vesta21 (see Methods section for details). Impactor sizes (d) were randomly drawn from the current main belt SFD, which is a reasonable approximation of the impactor size distribution over Ceres’ history since the asteroid belt likely reached collisional equilibrium on a time scale <100 Myr (ref. 22). Finally, crater sizes (D) were computed using a crater scaling law23. For the crater size range of interest here (D∼100–800 km), the adopted scaling implies D∼10–13 × d, and we implemented a conservative factor of 10 for the nominal model. The results of the nominal model are shown in Fig. 2a. Furthermore, we investigate the effects of uncertainties in the crater scaling law by comparing it with alternate scaling laws24, and dedicated hydrocode impact simulations25. The latter results in the most conservative scaling for the final crater size, D=7.6 × d, which thus provides a lower bound for the number of craters at any given size (see Methods section). We ran ∼103 simulations, and found that the model predicts the formation of about 90–180 craters >100 km, 40–70 >150 km and 9–14 >400 km. The range corresponds to D/d=7.6 and 10, respectively, as indicated above. Statistical uncertainties associated with our collisional model are within the indicated ranges. The total number of expected large craters indicates heavy reworking of the upper 10–15 km layers of Ceres, with important implications for the observed surface composition, geology and retention of crater morphology. In fact, the maximum number of detectable craters based on empirical saturation (Fig. 1a) is ∼40 and ∼20, respectively, for 100 and 150 km. At larger crater sizes, however, empirical saturation can be exceeded (as shown by Vesta—Fig. 1—and other asteroids9). Rescaling from Vesta by surface area, at least six to seven craters >400 km are expected.
The lack of well-defined large cerean basins is, therefore, remarkable. Assuming Poisson statistics, the likelihood of having no impact crater >400 km, if the average expectation is 6, is only 0.3%. In addition, the probability of observing 16 craters >100 km (Fig. 2b), if the observable average expectation is at least ∼40 (saturation), is vanishingly small.
Searching for relict impact structures
These results provide the motivation for an in-depth search for large-scale impact structures. We used a global stereo-photogrammetry topography model, with a spatial resolution of 130 m px−1 acquired during the 1,475 km high altitude mapping orbit. Similar results are obtained with stereo-photoclinometry topography. Overall, most of the Ceres’ surface is peppered by craters < ∼100 km, resulting in rugged topography, possibly hiding older, larger impact structures. Therefore, we use low-pass filtered topography to identify possible relict basins. A few quasi-circular and large-scale depressions, here referred to as planitiae, emerge. The most notable of these, Vendimia Planitia, is ∼800 km across (Fig. 3). Despite the fact that parts of the rim and floor are interrupted by superposed large craters, most notably by Kerwan and Dantu, the overall structure appears well defined. Radial profiles of filtered topography show a 3–4 km deep depression (Fig. 4a). A similar profile is also derived from the actual topography (Fig. 4b). Notably, the average topographic profiles show a distinctive conic-shaped trend, the presence of a raised rim and a gradual drop in elevation at increasing radial distances. These are all distinct markers for an impact structure. The overall shape of Vendimia Planitia’s topographic profiles resembles that of the comparatively well-preserved Kerwan crater, if one takes into account minor post-formation evolution due to relaxation17 (see Methods section). Overall, this depression is the best candidate for a large crater recognizable on Ceres’ surface (two other examples of putative basins are discussed in the Methods section).
It is noteworthy to mention that significant variations in spectral properties relative to Ceres’ average spectrum are consistently found within Vendimia Planitia. For instance, a map of the absorption band at 3.1 μm, characteristic of ammoniated phyllosilicates10,11, shows a broad area of enhanced absorption (interpreted as enriched in ammoniated phyllosilicates) that correlates with the large depression (see Methods section). It is conceivable that impact excavation could have exposed materials with a different composition and/or triggered local alteration processes. The 3.1 μm absorption is prominent in the ejecta of the young Dantu crater, indicating that spectral differences are not just due to a thin surface layer, but are deep-seated. In addition, Ceres’ Bouguer gravity (residual to the gravity of a two-layer structure with uniform density layers) and topography are generally anti-correlated26. Thus, areas of low topography—such as Vendimia Planitia, with an anomaly of 50 mGal—that are here interpreted as putative basins are underlain by relatively higher density material, indicating some degree of isostatic compensation. Craters superposed on this planitia are close to saturation, although somewhat below the heavily cratered terrains (Fig. 1b). This indicates that Vendimia Planitia is a very ancient feature, and if it is an impact basin, it is potentially responsible for the proposed Ceres’ paleo-family27. Note that the presence of 1–2 800 km basins is in line with extrapolation from the Vesta’s crater SFD (Fig. 1b).
The recent detection of widespread ammoniated phyllosilicates on Ceres has raised the possibility that Ceres could have been implanted in the main belt from the outer solar system10. Thus, this poses the question of whether a late implantation of Ceres into the main belt’s collisionally intense environment could explain the observed lack of large craters. From a dynamical standpoint, the latest possible time for such implantation to take place is during the instability responsible for the so-called late heavy bombardment at 4.1–4.2 Gyr ago (refs 5, 28). Because the post-instability dynamical evolution of the main belt is well understood, we can constrain the cratering history since this phase reasonably well29.
Following the computations described above, and assuming no collisions before implantation, the computed number of craters since 4.1 Gyr ago to the present time is 24–43, 10–17 and 3–4, respectively for 100, 150 and 400 km diameters. While the presence of one (up to three) large-scale depressions discussed above could be compatible with a late implantation, the depletion in the 100–400 km size range is an overall very low probability event (<2%). Note that the above computation neglects cratering before implantation, thus it is a very conservative estimate. Furthermore, the cerean large crater SFD (D>100 km) does not match the main belt SFD (Fig. 1a). Thus, we can conclude that Ceres’ cratering is not due to a late implantation in the main belt. Likewise, we can rule out that the observed cratering is due to primordial sublimation of a thick layer of ice, as this phase would have been concluded well before the late instability30.
The formation of a significant population of large craters, and their subsequent obliteration, is thus likely the result of Ceres’ internal processes. For instance, viscous relaxation of long-wavelength topography may obscure very old impact basins, although short wavelength features such as rims are projected to survive over geological time scales, in analogy to the icy satellites (for example, ref. 31). It should also be noted that the presence of a thin low viscosity top layer, which could quickly remove rims, is ruled out by the locally high spatial density of km-sized craters. Alternatively, internal evolution models predict the possible presence of liquid water for hundreds of Myr after formation of first solids32,33, potentially resulting in protracted widespread cryovolcanism, whose last vestiges can perhaps be found in Ahuna Mons34, and the bright materials in Occator crater12. Widespread resurfacing could also provide an explanation for the pervasive presence of ammoniated phyllosilicates at the surface, as well as the lack of ancient crater rims. However, clear evidence for the presence of large-scale flow features is lacking at current image resolution. In addition to the aforementioned processes, rims could also be removed by the high spatial density of superposed smaller impacts.
Regardless of the specific mechanism(s) for crater rim removal, our result requires that large crater obliteration was active well after the late heavy bombardment. This conclusion reveals that Ceres’ cratering record is inextricably linked to its peculiar composition and internal evolution.
Ceres ancient impact flux and crater scaling laws
We estimated the collision probability of asteroids striking onto Ceres using the methods described in ref. 8. The resulting so-called intrinsic collision probability is Pi=3.55 × 10−18 per year per km2, based on asteroids >50 km. Note that, following usual conventions, Pi is normalized to r2, where r is the radius of the target asteroid. Thus, the total number of impacts on an asteroid is Pi r2, and to calculate the number of impacts per unit area on the asteroid surface, this is divided by the asteroid surface area, Pi r2/(4π r2)=Pi/(4π), which is the expression used in the main text. The time-dependent cumulative number of collisions, following ref. 21, is reported in Fig. 5a.
We implemented several crater scaling laws to test robustness of our conclusions. The details of this analysis are shown in Fig. 5b. In all cases, we used an average impact speed of 5.1 km s−1 (computed using the methods described in ref. 8), a target density of 2.1 g cm−3, and a projectile density of 2.6 g cm−3. Notice that the actual densities have a limited effect to the final crater sizes. For instance, a target density of 1.8 g cm−3 results in 5% larger craters, all other parameters being the same. Our adopted target density corresponds to Ceres’ bulk value, thus it is likely an upper limit for the outermost layers. Higher target densities result in smaller crater sizes, thus it implies a conservative estimate for the final crater sizes. We also assumed a simple-to-complex crater transition of 10 km (ref. 7).
Among investigated crater scaling laws, iSALE simulations provided D/d ratios ranging from ∼9.4–10 to ∼7.6–8.2, respectively for Occator and Kerwan craters. We thus assumed the most conservative scaling of D=7.6 × d. The latter is used to compute a lower limit bound for the number of large craters predicted by our collisional models, as described in the main text.
Topographic profiles for Kerwan and other large depressions
Figure 6 reports the topographic profiles of Kerwan crater, the largest confirmed impact structure on Ceres. Note, the conic-shape profiles indicating that some degree of relaxation has taken place. These trends are qualitatively similar to those of Vendemia Planitia (Fig. 4), although the latter is certainly more relaxed due to an older formation age.
Additional large-scale depressions, indicated as Planitia B and C, are shown in Fig. 7. Planitia B is a 800 km depression delineated in the northern high latitudes by a remarkable arcuate ridge that extends for >1,000 km. Most of the southern rim is not visible, possibly due to the superposed cratering (for example, Yalode crater) or enhanced viscous relaxation at low latitude, with the exception of a short high relief segment whose relationship to the northern ridge is unclear. Topographic profiles across planitia B are noisier than those of Vendimia Planitia, although an average depression of 2–3 km with respect to the high relief ridge is observed (Fig. 8). In addition, the region immediately south of the putative centre of planitia B is the deepest depression on Ceres. A third, 500 km diameter feature, is also shown (planitia C). As before, topographic profiles show a consistent increase in elevation with increasing radial distance from the centre and a shallow raised rim (Fig. 8).
Linear features and spectra variability
Notably, to the south-west of planitia B, there are clearly visible chains of pits (Fig. 7a; refs 16, 35). The pits are roughly circular depressions, however, unlike impact craters, they tend to lack clearly defined rims and partially coalesce into one another (Fig. 9). This observation, along with the observations that the pit chains form en echelon patterns, indicates that the pit chains formed as the surface expression of subsurface fractures. The pit chains range in width from ∼1.5 to ∼11 km, and range in length from ∼50 to ∼380 km. The average spacing of the pit chains is ∼84 km and the deepest pit is ∼1.5 km deep. These pit chains are cross-cut by ejecta and scour marks from Yalode, Urvara and Occator craters, which indicates that the corresponding subsurface fractures are older than the craters. We derive best-fit planes for these fractures using the orientation of the overlying pit chains and likely dip angles. For this, we used dip angles of ∼60–80°, based on the work of refs 36, 37, although further work is required to better constrain the geometry of the fractures. These planes return pole positions that are within planitia B (Fig. 7). This suggests that this depression could be an ancient impact structure, and that its formation may have fractured the surface of Ceres, which may be analogous to the formation of the Divalia Fossae and Saturnalia Fossae as a result of the Rheasivia and Veneneia impacts, respectively, on Vesta38; although in the latter cases, the dip angles were almost perpendicular to the surface.
The 3.1 μm band also shows a broad, weak variation that correlates with planitia B, although less pronounced than for Vendimia Planitia (Fig. 10). The strength of the absorption band has been computed as illustrated in ref. 11. The input spectra have been filtered for illumination conditions and level of reflectance: only the spectra with incidence and emission angles <70°, phase angle between 15° and 60° and average I/F brightness >0.004 have been considered. To maximize the coverage, the map has been generated merging data sets with 3.5, 1.1 and 0.4 km px−1 spatial resolution (selecting at each location the best available resolution). However, other spectral maps do not show clear trends. An explanation could be that this is an older impact feature, consistent with the more subdued topography.
Finally, planitia B shows a clear correlation with a 50–100 mGal positive gravity anomaly and planitia C shows the strongest correlation to a >150 mgal positive gravity anomaly26, which is consistent with isostasy compensation of these features.
Crater counts and outputs of collisional simulations are available on request from the corresponding author.
How to cite this article: Marchi, S. et al. The missing large impact craters on Ceres. Nat. Commun. 7:12257 doi: 10.1038/ncomms12257 (2016).
Chambers, J. E. Planetary accretion in the inner Solar System. Earth Planet. Sci. Lett. 223, 241–252 (2004).
Wetherill, G. W. An alternative model for the formation of the asteroids. Icarus 100, 307–325 (1992).
Bottke, W. F. et al. Linking the collisional history of the main asteroid belt to its dynamical excitation and depletion. Icarus 179, 63–94 (2005).
Morbidelli, A., Bottke, W. F., Nesvorný, D. & Levison, H. F. Asteroids were born big. Icarus 204, 558–573 (2009).
Marchi, S. et al. High-velocity collisions from the lunar cataclysm recorded in asteroidal meteorites. Nat. Geosci. 6, 303–307 (2013).
Thomas, P. C. et al. Differentiation of the asteroid Ceres as revealed by its shape. Nature 437, 224–226 (2005).
Russell, C. T. et al. Dawn Arrives at Ceres: Exploration of a Small Volatile-Rich World. 47th Lunar and Planetary Science Conference 1275 (The Woodlands, TX, 2016).
Marchi, S. et al. The violent collisional history of Asteroid 4 Vesta. Science 336, 690 (2012).
Marchi, S., Chapman, C R., Barnouin, O. S., Richardson, J. E. & Vincent, J.-B. Cratering on Asteroids. (eds Asteroids IV, Patrick Michel, Francesca E. DeMeo, and William F. Bottke) 725–744 (University of Arizona Press, Tucson, 2015).
De Sanctis, M. C. et al. Ammoniated phyllosilicates with a likely outer solar system origin on (1) Ceres. Nature 528, 241–244 (2015).
Ammannito, E. et al. Distribution of Phyllosilicates on Ceres. 47th Lunar and Planetary Science) 3020 (The Woodlands, TX, 2016).
De Sanctis, M. C. et al. Bright carbonate deposits as evidence of aqueous alteration on (1) Ceres. Nature doi:10.1038/nature18290 (2016).
Marchi, S. et al. Cratering on Ceres: The Puzzle of the Missing Large Craters. (47th Lunar and Planetary Science Conference) 1281 (The Woodlands, TX, 2016).
O’Brien, D. P., Sykes & Mark, V. The origin and evolution of the asteroid belt—implications for Vesta and Ceres. Space Sci. Rev. 163, 41–61 (2011).
Bland, M. Predicted crater morphologies on Ceres: probing internal structure and evolution. Icarus 226, 510–521 (2013).
Buczkowski, D. L. et al. Linear Structures on Ceres: Morphology, Orientation, and Possible Formation Mechanisms. (47th Lunar and Planetary Science Conference) 1262 (The Woodlands, TX, 2016).
Bland, M. et al. Composition and structure of the shallow subsurface of Ceres revealed by crater morphology. Nat. Geosci 9, 538–542 (2016).
Petit, J.-M., Morbidelli, A. & Chambers, J. The primordial excitation and clearing of the asteroid belt. Icarus 153, 338–347 (2001).
O’Brien, D. P., Morbidelli, A. & Bottke, W. F. The primordial excitation and clearing of the asteroid belt-Revisited. Icarus 191, 434–452 (2007).
Minton, D. A. & Malhotra, R. Dynamical erosion of the asteroid belt and implications for large impacts in the inner solar system. Icarus 207, 744–757 (2010).
O’Brien, D. P. et al. Constraining the cratering chronology of Vesta. Planet. Space Sci. 103, 131–142 (2014).
Bottke, W. F. et al. The fossilized size distribution of the main asteroid belt. Icarus 175, 111–140 (2005).
Holsapple, K. A. & Housen, K. R. A crater and its ejecta: an interpretation of deep impact. Icarus 187, 345–356 (2007).
Johnson, B. C. et al. Spherule layers, crater scaling laws, and the population of ancient terrestrial impactors. Icarus 271, 350–359 (2016).
Bowling, T. J. et al. in 47th Lunar and Planetary Science Conference. LPI Contribution No. 1903, 2268 (The Woodlands, TX, 2016).
Park, R. S. et al. A partially differentiated interior for Ceres deduced from its gravity field and shape. Nature 10.1038/nature18955 (2016).
Carruba, V., Nesvorný, D., Marchi, S. & Aljbaae, S. Footprints of a possible Ceres asteroid paleo-family. eprint arXiv:1602.04736, 2016.
Levison, H. F. et al. Contamination of the asteroid belt by primordial trans-Neptunian objects. Nature 460, 364–366 (2009).
Morbidelli, A., Walsh, K. J., O'Brein, D. P.., Minton, D. A. & Bottke, W. F. The Dynamical Evolution of the Asteroid Belt (eds Asteroids IV, Patrick Michel, Francesca E. DeMeo, & William F. Bottke) 493–507 (University of Arizona Press, Tucson, 2015).
Castillo-Rogez, J. C. et al. in 47th Lunar and Planetary Science Conference, LPI Contribution No. 1903, 3012 (The Woodlands, TX, 2016).
Schenk, P. M. Thickness constraints on the icy shells of the galilean satellites from a comparison of crater shapes. Nature 417, 419–421 (2002).
McCord, T. B. & Sotin, C. Ceres: evolution and current state. J. Geophys. Res. 110, CiteID E05009 (2005).
Neveu, M. & Desch, S. J. Geochemistry, thermal evolution,and cryovolcanism on Ceres with a muddy ice mantle. Geophys. Res. Lett. 42, 10,197–10,206 (2015).
Ruesch, O. et al. Ahuna Mons: A Geologically-Young Extrusive Dome on Ceres. (47th Lunar and Planetary Science Conference) 2279 (The Woodlands, TX, 2016).
Scully, J. E. C. et al. Implications for the Geologic Evolution of Ceres, Derived from Global Geologic Mapping of Linear Features. (47th Lunar and Planetary Science Conference) 1618 (The Woodlands, TX, 2016).
Wyrick, D. et al. Distribution, morphology, and origins of Martian pit crater chains. J. Geophys. Res. 109, E06005 1–20 (2004).
Ferrill, D. A. et al. Coseismic, dilational-fault and extension-fracture related pit chain formation in Iceland: analog to pit chains on Mars. Lithosphere 3, 133–142 (2011).
Buczkowski, D. L. et al. Large-scale troughs on Vesta: a signature of planetary tectonics. Geophys. Res 39, CiteID L18205 (2012).
Gault, D. E. Saturation and equilibrium conditions for impact cratering on the lunar surface: criteria and implications. Radio Sci. 5, 273 (1970).
Marchi, S. et al. Widespread mixing and burial of Earth’s Hadean crust by asteroid impacts. Nature 511, 578–582 (2014).
Croft, S. K. The scaling of complex craters. J. Geophys. Res. 90, C828–C842 (1985).
We thank W.F. Bottke, J.C. Andrews-Hanna and J. Castillo-Rogez for useful discussion. We also thank J.H. Melosh and G.S. Collins for their meticulous comments that greatly improved the quality of the paper.
The authors declare no competing financial interests.
About this article
Cite this article
Marchi, S., Ermakov, A., Raymond, C. et al. The missing large impact craters on Ceres. Nat Commun 7, 12257 (2016). https://doi.org/10.1038/ncomms12257
Journal of Geophysical Research: Planets (2021)
Astronomy & Astrophysics (2020)
Nature Astronomy (2020)
Earth and Planetary Science Letters (2020)