From drug delivery1,2 to chemical and biological catalysis3 and cosmetics4, the need for efficient fabrication pathways for particles over a wide range of sizes, from a variety of materials, and in many different structures has been well established5. Here we harness the inherent scalability of fibre production6 and an in-fibre Plateau–Rayleigh capillary instability7 for the fabrication of uniformly sized, structured spherical particles spanning an exceptionally wide range of sizes: from 2 mm down to 20 nm. Thermal processing of a multimaterial fibre8 controllably induces the instability9, resulting in a well-ordered, oriented emulsion10 in three dimensions. The fibre core and cladding correspond to the dispersed and continuous phases, respectively, and are both frozen in situ on cooling, after which the particles are released when needed. By arranging a variety of structures and materials in a macroscopic scaled-up model of the fibre, we produce composite, structured, spherical particles, such as core–shell particles, two-compartment ‘Janus’ particles11, and multi-sectioned ‘beach ball’ particles. Moreover, producing fibres with a high density of cores allows for an unprecedented level of parallelization. In principle, 108 50-nm cores may be embedded in metres-long, 1-mm-diameter fibre, which can be induced to break up simultaneously throughout its length, into uniformly sized, structured spheres.
This is a preview of subscription content
Subscribe to Journal
Get full journal access for 1 year
only $3.90 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Timko, B. P. et al. Advances in drug delivery. Annu. Rev. Mater. Res. 41, 1–20 (2011)
Wang, J., Byrne, J. D., Napier, M. E. & DeSimone, J. M. More effective nanomedicines through particle design. Small 7, 1919–1931 (2011)
Bell, A. T. The impact of nanoscience on heterogeneous catalysis. Science 299, 1688–1691 (2003)
Souto, E. B. & Müller, R. H. Cosmetic features and applications of lipid nanoparticles. Int. J. Cosmet. Sci. 30, 157–165 (2008)
Rotello, V. Nanoparticles: Building Blocks for Nanotechnology (Springer, 2003)
Li, T., ed. Optical Fiber Communications Vol. 1, Fiber Fabrication (Academic, 1985)
Eggers, J. & Villermaux, E. Physics of liquid jets. Rep. Prog. Phys. 71, 036601 (2008)
Abouraddy, A. F. et al. Towards multimaterial multifunctional fibres that see, hear, sense and communicate. Nature Mater. 6, 336–347 (2007)
Shabahang, S., Kaufman, J. J., Deng, D. S. & Abouraddy, A. F. Observation of the Plateau-Rayleigh capillary instability in multi-material optical fibers. Appl. Phys. Lett. 99, 161909 (2011)
Sjöblom, J. Encyclopedic Handbook of Emulsion Technology (Marcel Dekker, 2001)
Walther, A. & Müller, A. H. E. Janus particles. Soft Matter 4, 663–668 (2008)
Cao, G. Nanostructures and Nanomaterials: Synthesis, Properties and Applications (Imperial College Press, 2004)
Vollath, D. Nanomaterials: An Introduction to Synthesis, Properties and Application (Wiley-VCH, 2008)
Merkel, T. J. et al. Scalable shape-specific, top-down fabrication methods for the synthesis of engineered colloidal microparticles. Langmuir 26, 13086–13096 (2010)
Utada, A. S. et al. Monodisperse double emulsions generated from a microcapillary device. Science 308, 537–541 (2005)
Dendukuri, D. & Doyle, P. S. The synthesis and assembly of polymeric microparticles using microfluidics. Adv. Mater. 21, 4071–4086 (2009)
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A. & Doyle, P. S. Continuous-flow lithography for high-throughput microparticle synthesis. Nature Mater. 5, 365–369 (2006)
Hernandez, C. J. & Mason, T. G. Colloidal alphabet soup: Monodisperse dispersions of shape-designed LithoParticles. J. Phys. Chem. C 111, 4477–4480 (2007)
Rolland, J. P. et al. Direct fabrication and harvesting of monodisperse, shape specific nano-biomaterials. J. Am. Chem. Soc. 127, 10096–10100 (2005)
Kaufman, J. J. et al. Thermal drawing of high-density macroscopic arrays of well-ordered sub-5-nm-diameter nanowires. Nano Lett. 11, 4768–4773 (2011)
Nie, Z. H. et al. Emulsification in a microfluidic flow-focusing device: Effect of the viscosities of the liquids. Microfluidics and Nanofluidics 5, 585–594 (2008)
Tomotika, S. On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid. Proc. R. Soc. Lond. A 150, 322–337 (1935)
Deng, D. S. et al. In-fiber nanoscale semiconductor filament arrays. Nano Lett. 8, 4265–4269 (2008)
Nisisako, T. & Torii, T. Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles. Lab Chip 8, 287–293 (2008)
Liang, X., Deng, D. S., Nave, J.-C. & Johnson, S. G. Linear stability analysis of capillary instabilities for concentric cylindrical shells. J. Fluid Mech. 683, 235–262 (2011)
Deng, D. S., Nave, J.-C., Liang, X., Johnson, S. G. & Fink, Y. Exploration of in-fiber nanostructures from capillary instability. Opt. Express 19, 16273–16290 (2011)
Smith, K. A., Solis, F. J. & Chopp, D. L. A projection method for motion of triple junctions by levels sets. Interfaces Free Bound. 4, 263–276 (2002)
Dussan, V. E. B. On the spreading of liquids on solid surfaces: static and dynamic contact lines. Annu. Rev. Fluid Mech. 11, 371–400 (1979)
de Gennes, P. G. Wetting: statics and dynamics. Rev. Mod. Phys. 57, 827–863 (1985)
Israelachvili, J. N. Intermolecular and Surface Forces (Academic, 1992)
Ballato, J. et al. Advancements in semiconductor core optical fiber. Opt. Fiber Technol. 16, 399–408 (2010)
Orf, N. D. et al. Fiber draw synthesis. Proc. Natl Acad. Sci. USA 108, 4743–4747 (2011)
Work at UCF was supported by the US National Science Foundation (award number ECCS-1002295), a Ralph E. Powe Junior Faculty Enhancement Award from the Oak Ridge Associated Universities (ORAU), in part by the US Air Force Office of Scientific Research (AFOSR) under contract FA-9550-12-1-0148, and by CREOL, The College of Optics & Photonics. Work at MIT was supported in part by the Materials Research Science and Engineering Program of the US NSF under award number DMR-0819762, and also in part by the US Army Research Office through the Institute for Soldier Nanotechnologies under contract number W911NF-07-D-0004. We thank Sasha Stolyarov, J. Manuel Perez, Sudipta Seal and Kirk Scammon for assistance. We especially thank M. J. Soileau, B. E. A. Saleh, D. N. Christodoulides and M. Z. Bazant for encouragement and support.
The authors declare no competing financial interests.
This file contains Supplementary Text and Data, Supplementary Table 1, Supplementary Figures 1-10, legend for Supplementary Movie 1 and additional references. (PDF 1065 kb)
This file contains a movie showing computed core-shell particle breakup dynamics (see Supplementary Information file for full legend). (MP4 1760 kb)
About this article
Cite this article
Kaufman, J., Tao, G., Shabahang, S. et al. Structured spheres generated by an in-fibre fluid instability. Nature 487, 463–467 (2012). https://doi.org/10.1038/nature11215
Nature Nanotechnology (2022)
Microfluidics nanoprecipitation of telmisartan nanoparticles: effect of process and formulation parameters
Chemical Papers (2021)
Nature Communications (2020)
Advanced Fiber Materials (2020)