Fibrous media are functional and versatile materials, as demonstrated by their ubiquity both in natural systems such as feathers1,2,3,4 and adhesive pads5 and in engineered systems from nanotextured surfaces6 to textile products7, where they offer benefits in filtration, insulation, wetting and colouring. The elasticity and high aspect ratios of the fibres allow deformation under capillary forces, which cause mechanical damage8, matting5,9 self-assembly10,11 or colour changes12, with many industrial and ecological consequences. Attempts to understand these systems have mostly focused on the wetting of rigid fibres13,14,15,16,17 or on elastocapillary effects in planar geometries18 and on a fibre brush withdrawn from an infinite bath19. Here we consider the frequently encountered case of a liquid drop deposited on a flexible fibre array and show that flexibility, fibre geometry and drop volume are the crucial parameters that are necessary to understand the various observations referred to above. We identify the conditions required for a drop to remain compact with minimal spreading or to cause a pair of elastic fibres to coalesce. We find that there is a critical volume of liquid, and, hence, a critical drop size, above which this coalescence does not occur. We also identify a drop size that maximizes liquid capture. For both wetting and deformation of the substrates, we present rules that are deduced from the geometric and material properties of the fibres and the volume of the drop. These ideas are applicable to a wide range of fibrous materials, as we illustrate with examples for feathers, beetle tarsi, sprays and microfabricated systems.
Your institute does not have access to this article
Open Access articles citing this article.
Nature Physics Open Access 24 March 2022
Scientific Reports Open Access 21 September 2021
Framework with cytoskeletal actin filaments forming insect footpad hairs inspires biomimetic adhesive device design
Communications Biology Open Access 29 May 2020
Subscribe to Journal
Get full journal access for 1 year
only $3.90 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Rijke, A. M. & Jesser, W. A. The feather structure of dippers: water repellency and resistance to water penetration. Wilson J. Ornithol. 122, 563–568 (2010)
Rijke, B. Y. A. M. The water repellency and feather structure of cormorants, Phalacrocoracidae. J. Exp. Biol. 48, 185–189 (1968)
Dawson, C., Vincent, J., Jeronimidis, G., Rice, G. & Forshaw, P. Heat transfer through penguin feathers. J. Theor. Biol. 199, 291–295 (1999)
Zi, J. et al. Coloration strategies in peacock feathers. Proc. Natl Acad. Sci. USA 100, 12576–12578 (2003)
Eisner, T. & Aneshansley, D. J. Defense by foot adhesion in a beetle (Hemisphaerota cyanea). Proc. Natl Acad. Sci. USA 97, 6568–6573 (2000)
Liu, K. & Jiang, L. Bio-inspired design of multiscale structures for function integration. Nano Today 6, 155–175 (2011)
Eadie, L. & Ghosh, T. K. Biomimicry in textiles: past, present and potential. An overview. J. R. Soc. Interface 6, 761–775 (2011)
Kamo, J., Hiram, T. & Kamada, K. Solvent-induced morphological change of microporous hollow fiber membranes. J. Membr. Sci. 70, 217–224 (1992)
O’Hara, P. D. & Morandin, L. A. Effects of sheens associated with offshore oil and gas development on the feather microstructure of pelagic seabirds. Mar. Pollut. Bull. 60, 672–678 (2010)
Pokroy, B., Kang, S. H., Mahadevan, L. & Aizenberg, J. Self-organization of a mesoscale bristle into ordered, hierarchical helical assemblies. Science 323, 237–240 (2009)
Chandra, D. & Yang, S. Stability of high-aspect-ratio micropillar arrays against adhesive and capillary forces. Acc. Chem. Res. 43, 1080–1091 (2010)
Chandra, D., Yang, S., Soshinsky, A., a & Gambogi, R. J. Biomimetic ultrathin whitening by capillary-force-induced random clustering of hydrogel micropillar arrays. ACS Appl. Mater. Interfaces 1, 1698–1704 (2009)
Princen, H. Capillary phenomena in assemblies of parallel cylinders III. Liquid columns between horizontal parallel cylinders. J. Colloid Interface Sci. 34, 171–184 (1970)
Wu, X.-F., Bedarkar, A. & Vaynberg, K. A. Droplets wetting on filament rails: surface energy and morphology transition. J. Colloid Interface Sci. 341, 326–332 (2010)
Bedarkar, A., Wu, X.-f. & Vaynberg, A. Wetting of liquid droplets on two parallel filaments. Appl. Surf. Sci. 256, 7260–7264 (2010)
Minor, F. W., Schwartz, M., Wulkow, E., a & Buckles, L. C. Part III: The behavior of liquids on single textile fibers. Text. Res. J. 29, 940–949 (1959)
Keis, K., Kornev, K. G., Kamath, Y. K. & Neimark, A. V. in Nanoengineered Nanofibrous Materials (eds Guceri, S., Gogotsi, Y. G & Kuznetsov, V. ) 173–180 (Kluwer, 2004)
Kwon, H.-M., Kim, H.-Y., Puëll, J. R. M. & Mahadevan, L. Equilibrium of an elastically confined liquid drop. J. Appl. Phys. 103, 093519 (2008)
Roman, B. & Bico, J. Elasto-capillarity: deforming an elastic structure with a liquid droplet. J. Phys. Condens. Matter 22, 493101 (2010)
Hubbe, M. A. Bonding between cellulosic fibers in the absence and presence of dry-strength agents - a review. BioResources 1, 281–318 (2006)
Prakash, M., Quéré, D. & Bush, J. W. M. Surface tension transport of prey by feeding shorebirds: the capillary ratchet. Science 320, 931–934 (2008)
Py, C., Bastien, R., Bico, J., Roman, B. & Boudaoud, A. 3D aggregation of wet fibers. Europhys. Lett. 77, 44005 (2007)
Hartung, R. Energy metabolism in oil-covered ducks. J. Wildl. Mgmt 31, 798–804 (1967)
C.D. and H.A.S. acknowledge Unilever and the NFS for financial support. S.P. acknowledges financial support from the Emergence(s) Program of the City of Paris and CNRS and thanks Princeton University for its hospitality. We thank A. Lips and P. Warren for comments.
The authors declare no competing financial interests.
This file contains Supplementary Text and Data, Supplementary Figures 1-7 with legends, Supplementary Table 1 and legends for Supplementary Movies 1-3. (PDF 4892 kb)
This movie shows the evolution of a drop of volume V = 2 μL on a rail formed by two fibres of length L =3 cm and separated by a distance d0 = 0.76 mm, viewed simultaneously from the side and the top. (MOV 10616 kb)
This movie shows the evolution of a drop of volume V = 2 μL on a rail formed by two fibres of length L =4 cm and separated by a distance d0 = 0.76 mm, viewed simultaneously from the side and the top. (MOV 11876 kb)
This movie shows the evolution of a drop of volume V = 2 μL on a rail formed by two fibres of length L =3.5 cm and separated by a distance d0 = 0.76 mm, viewed simultaneously from the side and the top. (MOV 9718 kb)
About this article
Cite this article
Duprat, C., Protière, S., Beebe, A. et al. Wetting of flexible fibre arrays. Nature 482, 510–513 (2012). https://doi.org/10.1038/nature10779
Nature Physics (2022)
Scientific Reports (2021)
Nature Physics (2021)
Experiments in Fluids (2021)
Theoretical and Computational Fluid Dynamics (2021)