Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Metal–insulator–semiconductor optoelectronic fibres


The combination of conductors, semiconductors and insulators with well-defined geometries and at prescribed length scales, while forming intimate interfaces, is essential in most functional electronic and optoelectronic devices. These are typically produced using a variety of elaborate wafer-based processes, which allow for small features, but are restricted to planar geometries and limited coverage area1,2,3. In contrast, the technique of fibre drawing from a preformed reel or tube is simpler and yields extended lengths of highly uniform fibres with well-controlled geometries and good optical transport characteristics4. So far, this technique has been restricted to particular materials5,6,7 and larger features8,9,10,11,12. Here we report on the design, fabrication and characterization of fibres made of conducting, semiconducting and insulating materials in intimate contact and in a variety of geometries. We demonstrate that this approach can be used to construct a tunable fibre photodetector comprising an amorphous semiconductor core contacted by metallic microwires, and surrounded by a cylindrical-shell resonant optical cavity. Such a fibre is sensitive to illumination along its entire length (tens of meters), thus forming a photodetecting element of dimensionality one. We also construct a grid of such fibres that can identify the location of an illumination point. The advantage of this type of photodetector array is that it needs a number of elements of only order N, in contrast to the conventional order N2 for detector arrays made of photodetecting elements of dimensionality zero.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Rent or buy this article

Get just this article for as long as you need it


Prices may be subject to local taxes which are calculated during checkout

Figure 1: Dual electron-photon fibre (hybrid fibre).
Figure 2: Integrated optoelectronic device fibre.
Figure 3: Results of optical and electrical measurements performed on the device fibres.
Figure 4: A woven spectrometric fabric.


  1. Sze, S. M. Semiconductor Devices: Physics and Technology 2nd edn (John Wiley, New York, 2001)

    Google Scholar 

  2. Sedra, A. S. & Smith, K. C. Microelectronic Circuits (Oxford Univ. Press, Oxford, 2003)

    Google Scholar 

  3. Chuang, S. L. Physics of Optoelectronic Devices (John Wiley, New York, 1995)

    Google Scholar 

  4. Sanghera, J. S. & Aggarwal, I. D. (eds) Infrared Fiber Optics (CRC Press, New York, 1998)

  5. Harrington, J. A. A review of IR transmitting, hollow waveguides. Fiber Integrated Opt. 19, 211–227 (2000)

    Article  ADS  CAS  Google Scholar 

  6. Katagiri, T., Matsuura, Y. & Miyagi, M. Metal-covered photonic bandgap multilayer for infrared hollow waveguides. Appl. Opt. 41, 7603–7606 (2002)

    Article  ADS  CAS  Google Scholar 

  7. Large, M. et al. Microstructured optical fibers: Why use polymers? Proc. 29th Eur. Conf. on Opt. Comm. (ECOC'03 Rimini), 1014–1017 (2003); available at 〈

  8. Broeng, J., Mogilevstev, D., Barkou, S. E. & Bjarklev, A. Photonic crystal fibers: A new class of optical waveguides. Opt. Fiber Technol. 5, 305–330 (1999)

    Article  ADS  Google Scholar 

  9. Eggleton, B. J., Kerbage, C., Westbrook, P. S., Windeler, R. S. & Hale, A. Microstructured optical fiber devices. Opt. Express 9, 698–713 (2001)

    Article  ADS  CAS  Google Scholar 

  10. van Eijkelenborg, M. A. et al. Microstructured polymer optical fiber. Opt. Express 9, 319–327 (2001)

    Article  ADS  CAS  Google Scholar 

  11. Allan, D. C. et al. in Photonic Crystal and Light Localisation in the 21st Century (ed. Soukoulis, C. M.) 305–320 (Kluwer Academic, Dordrecht, 2001)

    Book  Google Scholar 

  12. Knight, J. C. Photonic crystal fibres. Nature 424, 847–851 (2003)

    Article  ADS  CAS  Google Scholar 

  13. Yeh, P., Yariv, A. & Marom, E. Theory of Bragg fiber. J. Opt. Soc. Am. 68, 1196–1201 (1978)

    Article  ADS  Google Scholar 

  14. Fink, Y. et al. A Dielectric omnidirectional reflector. Science 282, 1679–1682 (1998)

    Article  ADS  CAS  Google Scholar 

  15. Kuriki, K. et al. Hollow multilayer photonic bandgap fibers for NIR applications. Opt. Express 12, 1510–1517 (2004)

    Article  ADS  CAS  Google Scholar 

  16. Hart, S. D. et al. External reflection from omnidirectional dielectric mirror fibers. Science 296, 510–513 (2002)

    Article  ADS  CAS  Google Scholar 

  17. Temelkuran, B., Hart, S. D., Benoit, G., Joannopoulos, J. D. & Fink, Y. Wavelength-scalable hollow optical fibres with large photonic bandgaps for CO2 laser transmission. Nature 420, 650–653 (2002)

    Article  ADS  CAS  Google Scholar 

Download references


M.B. thanks P. H. Prideaux for teaching him optical fibre drawing. We also thank N. Orf for glass transition temperature measurements, Y. Kuriki for taking SEM micrographs, and K. Kuriki for providing PEI polymer films. This work was supported in part by DARPA/Carrano and DARPA/Griggs, DARPA QUIST, the ARO, the ONR, the AFOSR HEL-MURI, the US DOE, the ISN, and the Materials Research Science and Engineering Center (MRSEC) programme of the NSF (with the use of their Shared Experimental Facilities).

Author information

Authors and Affiliations


Corresponding authors

Correspondence to Mehmet Bayindir or Yoel Fink.

Ethics declarations

Competing interests

The authors declare that they have no competing financial interests.

Supplementary information

Supplementary Notes

Construction of a two-dimensional photoconducting transparent fibre web. (DOC 26 kb)

Supplementary Figure 1

A two-dimensional photoconducting transparent fibre web. (JPG 96 kb)

Supplementary Video 1

Two-dimensional O(N) photoconducting fiber web tracking the location of a light beam: The photodetecting fibre web is shown beside a computer screen that displays the user interface for the program. When the light beam, from a flash light, is moved across the grid, a spot is generated and displayed on the computer screen at the corresponding location on the virtual grid. Once the beam is removed the point on the screen disappears, signifying that all the voltage drops on the fibers have returned to their dark values. (MPG 4304 kb)

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Bayindir, M., Sorin, F., Abouraddy, A. et al. Metal–insulator–semiconductor optoelectronic fibres. Nature 431, 826–829 (2004).

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing