Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Imparting strength and toughness to brittle composites


HIGH strength and high toughness are usually mutually exclusive in composites which have brittle filaments in a brittle matrix. The high tensile strength characteristic of strong interfacial filament–matrix bonding can, however, be combined with the high fracture toughness of weak interfacial bonding if the filaments are arranged to have alternate sections of high and low shear stress (and low and high toughness). Such weak and strong areas can be achieved by appropriate intermittent coating of the fibres. The strong regions ensure that the filament strength is picked up. Randomly positioned weak areas effectively blunt running cracks by the Cook–Gordon mechanism1, which in turn produces long pull-out lengths with an associated large contribution to toughness. Boron–epoxy composites of volume fraction 0.20–0.25 have been made in this way; they have fracture toughnesses of over 200 kJ m−2, and they retain rule of mixtures tensile strengths (650 MN m−2). At the volume fractions used, that apparently represents KIC values greater than 100 MN m−3/2.

Access options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.


  1. 1

    Cook, J., and Gordon, J. E., Proc. R. Soc., A 282, 508–525 (1964).

    ADS  Google Scholar 

  2. 2

    Marston, T. U., Atkins, A. G., and Felbeck, D. K., J. Mater. Sci., 9, 447–455 (1974).

    ADS  CAS  Article  Google Scholar 

  3. 3

    Marston, T. U., thesis, Univ. Michigan (1973).

  4. 4

    Gurney, C., and Hunt, J., Proc. R. Soc., A 299, 508–524 (1967).

    ADS  CAS  Article  Google Scholar 

  5. 5

    Outwater, J. O., and Murphy, M. C., Soc. Plastics Industry, 24th Ann. Conf., Composites Division, Paper IIC (1969).

Download references

Author information



Rights and permissions

Reprints and Permissions

About this article

Cite this article

ATKINS, A. Imparting strength and toughness to brittle composites. Nature 252, 116–118 (1974).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links