Abstract
A Remarkable phenomenon is shown by metallic titanium when rubbed against many hard surfaces. If a piece of the metal with a rounded end, of radius of curvature about 1 mm., is pressed firmly on to a hard surface and drawn across it, the metal is left behind in the form of a silvery smear. Smears are obtained with greater difficulty on some substances than on others, but only one crystalline material has been found on which no smear is produced (see accompanying table). The titanium metal may be removed by treatment with hot concentrated hydrochloric or sulphuric acids for about half an hour, or by treatment with cold commercial hydrofluoric acid for a few seconds. Some surfaces which were originally smooth and shiny are seen to have lost their polish after the titanium has been dissolved away. In this way, for example, it is possible to remove the polished surface of glass by rubbing with titanium and then dissolving the metallic smear in hydrochloric acid. The table gives a summary of the results obtained on a number of crystalline materials and on glass.
Similar content being viewed by others
Article PDF
References
Bowden, F. P., Moore, A. J. W., and Tabor, D.,J. Appl. Physics, 14, 80 (1943.)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
WOOSTER, W., MACDONALD, G. Smears of Titanium Metal. Nature 160, 260 (1947). https://doi.org/10.1038/160260a0
Issue Date:
DOI: https://doi.org/10.1038/160260a0
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.