Abstract
Ultra-lightweight alloys with high strength, ductility and corrosion resistance are desirable for applications in the automotive, aerospace, defence, biomedical, sporting and electronic goods sectors. Ductility and corrosion resistance are generally inversely correlated with strength, making it difficult to optimize all three simultaneously. Here we design an ultralow density (1.4 g cm−3) Mg–Li-based alloy that is strong, ductile, and more corrosion resistant than Mg-based alloys reported so far. The alloy is Li-rich and a solute nanostructure within a body-centred cubic matrix is achieved by a series of extrusion, heat-treatment and rolling processes. Corrosion resistance from the environment is believed to occur by a uniform lithium carbonate film in which surface coverage is much greater than in traditional hexagonal close-packed Mg-based alloys, explaining the superior corrosion resistance of the alloy.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Polmear, I. J. Light Alloys: From Traditional Alloys to Nanocrystals 4 edn (Butterworth Heinemann, 2005).
Byrer, T. G., White, E. L. & Frost, P. D. The Development of Magnesium–Lithium Alloys for Structural Applications, NASA Contractor Report (Battelle Memorial Institute, 1963).
Freeth, W. E. & Raynor, G. V. The systems magnesium–lithium and magnesium–lithium–silver. J. Inst. Met. 82, 569–574 (1953–1954).
Zhong, H., Feng, L. P., Liu, P. Y. & Zou, T. T. Design of a Mg–Li–Al–Zn alloy by means of CALPHAD approach. J. Comp. Aided Mater. Des. 10, 191–199 (2003).
Bae, D. H., Lee, M. H., Kim, K. T., Kim, W. T. & Kim, D. H. Application of quasicrystalline particles as a strengthening phase in Mg–Zn–Y alloys. J. Alloys Compd. 342, 445–450 (2002).
Tsujikawa, M. et al. Corrosion protection of Mg–Li alloy by plasma thermal spraying of aluminum. Plasma Process. Polym. 4, S593–S596 (2007).
Gusieva, K., Davies, C. H. J., Scully, J. R. & Birbilis, N. Corrosion of magnesium alloys: The role of alloying. Int. Mater. Rev. 60, 169–194 (2015).
Sasaki, T. T. et al. Strong and ductile heat-treatable Mg–Sn–Zn–Al wrought alloys. Acta Mater. 99, 176–186 (2015).
Orlov, D., Ralston, K. D., Birbilis, N. & Estrin, Y. Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing. Acta Mater. 59, 6176–6186 (2011).
Qiu, D., Zhang, M. X., Taylor, J. A. & Kelly, P. M. A new approach to designing a grain refiner for Mg casting alloys and its use in Mg–Y-based alloys. Acta Mater. 57, 3052–3059 (2009).
Argon, A. S. Strengthening Mechanisms in Crystal Plasticity (Oxford Univ. Press, 2008).
Hsu, C.-C., Wang, J.-Y. & Lee, S. Room temperature aging characteristic of MgLiAlZn alloy. Mater. Trans. 49, 2728–2731 (2008).
Matsuzawa, K., Koshihara, T., Ochiai, S. & Kojima, Y. The effect of additional element on the age-hardening characteristics and properties of Mg–Li alloys. J. Jpn Inst. Light Met. 40, 659–665 (1990).
Chiu, C.-H., Wu, H. Y., Wang, J.-Y. & Lee, S. Microstructure and mechanical behavior of LZ91 Mg alloy processed by rolling and heat treatments. J. Alloys Compd. 460, 246–252 (2008).
Kirkland, N. T., Lespagnol, J., Birbilis, N. & Staiger, M. P. A survey of bio-corrosion rates of magnesium alloys. Corros. Sci. 52, 287–291 (2010).
Sudholz, A. D., Kirkland, N. T., Buchheit, R. G. & Birbilis, N. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys. Electrochem. Solid State Lett. 14, C5–C7 (2011).
Ralston, K. D. et al. Role of nanostructure in pitting of Al–Cu–Mg alloys. Electrochim. Acta 55, 7834–7842 (2010).
Ralston, K. D., Birbilis, N., Weyland, M. & Hutchinson, C. R. The effect of precipitate size on the yield strength-pitting corrosion correlation in Al–Cu–Mg alloys. Acta Mater. 58, 5941–5948 (2010).
Kirkland, N. T., Staiger, M. P., Nisbet, D., Davies, C. H. J. & Birbilis, N. Performance-driven design of biocompatible Mg alloys. J. Miner. 63, 28–34 (2011).
Daniszewska, A. et al. Metallic nano-materials and nanostructures: Development of technology roadmap. Solid State Phenom. 114, 345–392 (2006).
Davis, J. R. (ed.) Alloying, Understanding the Basics (ASM International, 2001).
Eriksson, T. et al. Surface analysis of LiMn2O4 electrodes in carbonate-based electrolytes. J. Electrochem. Soc. 149, A69–A78 (2002).
Taheri, M. et al. Towards a physical description for the origin of enhanced catalytic activity of corroding magnesium surfaces. Electrochim. Acta 116, 396–403 (2014).
Vaumouse, D., Cerezo, A. & Warren, P. J. A procedure for quantification of precipitate microstructures from three-dimensional atom probe data. Ultramicroscopy 95, 215–224 (2003).
Hyde, J. M. & English, C. A. in Proc. MRS 2000 Fall Meeting Symp. (eds Lucas, R. G. E., Snead, L., Kirk, M. A. & Elliman, R. G.) 27–33 (2001).
Acknowledgements
The authors would like to thank the Australian Research Council (ARC) and Australia–China Science & Research Fund (ACSRF) for funding of this work via the ARC Centre of Excellence for Design in Light Metals (Grant no. CEO561574), Australia–China Research Centre for Light Metals (AccLiM) (Grant no: ACSRF00301) and ARC Discovery Scheme (Grant no. DP150103290). The authors would also like to thank the UNSW and USYD nodes of the Australian Microscopy and Microanalysis Research Facility (AMMRF) for providing access to their electron microscopy and atom probe tomography facilities, CHALCO for casting and extruding the alloy, and the Australian Synchrotron for the provision of experimental time. We are indebted to B. Gong and M.Z. Quadir of UNSW for their assistance with XPS and TEM, respectively, S.P. Ringer of University of Sydney for the provision of APT facilities for the WQ alloy, and T. Liu of Monash University for assistance with mass loss and hydrogen evolution tests.
Author information
Authors and Affiliations
Contributions
W.X. carried out the thermal and mechanical processing of the alloy, including structural analyses using SEM, TEM, XRD texture and XPS, and the mechanical property analyses. Y.X. developed the optimal alloy composition and cast and extruded the material. N.B. and W.X. carried out the corrosion investigations. G.S. carried out the APT investigations. Y.W. carried out the laboratory XRD investigations. J.E.D. carried out the high-resolution synchrotron XRD investigations. M.F. and W.X. designed the experimental programme and M.F. coordinated the overall project. All authors contributed to the interpretation of the results and to the writing of the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Information (PDF 1539 kb)
Rights and permissions
About this article
Cite this article
Xu, W., Birbilis, N., Sha, G. et al. A high-specific-strength and corrosion-resistant magnesium alloy. Nature Mater 14, 1229–1235 (2015). https://doi.org/10.1038/nmat4435
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nmat4435
This article is cited by
-
Effect of Li Content on the Surface Film Formed on the Binary Mg–Li Alloys in NaCl Solution
Metals and Materials International (2024)
-
Bio-inspired inorganic-protein coating on Mg-based biomaterials for bioengineering applications
Science China Materials (2024)
-
A First-principles Study on the Adhesion Strength, Interfacial Stability, and Electronic Properties of Mg/Mg2Y Interface
Acta Metallurgica Sinica (English Letters) (2024)
-
Semi-solid Tensile Behavior and its Relationship with Hot Tearing Susceptibility of Mg–xCa Alloys
International Journal of Metalcasting (2024)
-
Performance Study on a High-Strength Extruded Magnesium Alloy Van Frame Using FEA
Strength of Materials (2024)