Abstract
The San Andreas fault accommodates 28–34 mm yr−1 of right lateral motion of the Pacific crustal plate northwestward past the North American plate. In California, the fault is composed of two distinct locked segments that have produced great earthquakes in historical times, separated by a 150-km-long creeping zone. The San Andreas Fault Observatory at Depth (SAFOD) is a scientific borehole located northwest of Parkfield, California, near the southern end of the creeping zone. Core was recovered from across the actively deforming San Andreas fault at a vertical depth of 2.7 km (ref. 1). Here we report laboratory strength measurements of these fault core materials at in situ conditions, demonstrating that at this locality and this depth the San Andreas fault is profoundly weak (coefficient of friction, 0.15) owing to the presence of the smectite clay mineral saponite, which is one of the weakest phyllosilicates known. This Mg-rich clay is the low-temperature product of metasomatic reactions between the quartzofeldspathic wall rocks and serpentinite blocks in the fault2,3. These findings provide strong evidence that deformation of the mechanically unusual creeping portions of the San Andreas fault system is controlled by the presence of weak minerals rather than by high fluid pressure or other proposed mechanisms1. The combination of these measurements of fault core strength with borehole observations1,4,5 yields a self-consistent picture of the stress state of the San Andreas fault at the SAFOD site, in which the fault is intrinsically weak in an otherwise strong crust.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Zoback, M., Hickman, S. & Ellsworth, W. Scientific drilling into the San Andreas Fault zone. Eos 91, 197–199 (2010)
Moore, D. E. & Rymer, M. J. Talc-bearing serpentinite, and the creeping section of the San Andreas fault. Nature 448, 795–797 (2007)
Moore, D. E. & Rymer, M. J. Metasomatic origin of fault gouge comprising the two creeping strands at SAFOD. Eos (Fall suppl.), paper T41A-2105. (2010)
Boness, N. & Zoback, M. D. A multi-scale study of the mechanisms controlling shear velocity anisotropy in the San Andreas Fault Observatory at Depth. Geophysics 71, F131–F146 (2006)
Hickman, S. & Zoback, M. D. Stress measurements in the SAFOD pilot hole: implications for the frictional strength of the San Andreas fault. Geophys. Res. Lett. 31 L15S12 10.1029/2004GL020043 (2004)
Zoback, M. D., Hickman, S. & Ellsworth, W. in Treatise on Geophysics Vol. 4 (ed. Schubert, G.) 649–674 (Elsevier, 2007)
Tobin, H., Ito, H., Behrmann, J., Hickman, S. H. & Kimura, G. in Report from IODP/ICDP Workshop on Fault Zone Drilling, Scientific Drilling (eds Ito, H. et al.) 5–16 (Special Issue No. 1, Integrated Ocean Drilling Program, Hokkaido, 2007)
Solum, J. G. et al. Mineralogical characterization of protolith and fault rocks from the SAFOD main hole. Geophys. Res. Lett. 33 L21314 10.1029/2006GL027285 (2006)
Tembe, S. et al. Frictional strength of cuttings and core from SAFOD drillhole phases 1 and 2. Geophys. Res. Lett. 33 L23307 10.1029/2006GL027626 (2006)
Holdsworth, R. E. et al. Fault rocks from the SAFOD core samples: implications for weakening at shallow depths along the San Andreas Fault, California. J. Struct. Geol. 33, 132–134 (2011)
Moore, D. E. & Lockner, D. A. Frictional strengths of talc-serpentinite and talc-quartz mixtures. J. Geophys. Res. 116 B01403 10.1029/2010JB007881 (2011)
Crawford, B. R., Faulkner, D. R. & Rutter, E. H. Strength, porosity, and permeability development during hydrostatic and shear loading of synthetic quartz-clay fault gouge. J. Geophys. Res. 113 B03207 10.1029/2006JB004634 (2008)
Tembe, S., Lockner, D. A. & Wong, T.-f. Effect of clay content and mineralogy on frictional sliding behavior of simulated gouges: binary and ternary mixtures of quartz, illite and montmorillonite. J. Geophys. Res. 115 B03416 10.1029/2009JB006383 (2010)
Collettini, C., Niemeijer, A., Viti, C. & Marone, C. Fault zone fabric and fault weakness. Nature 462, 907–910 (2009)
Dieterich, J. H. Modeling of rock friction 1. Experimental results and constitutive equations. J. Geophys. Res. 84, 2161–2168 (1979)
Moore, D. E., Lockner, D. A., Ma, S., Summers, R. & Byerlee, J. D. Strengths of serpentinite gouges at elevated temperatures. J. Geophys. Res. 102, 14787–14801 (1997)
Moore, D. E., Lockner, D. A., Tanaka, H. & Iwata, K. The coefficient of friction of chrysotile gouge at seismogenic depths. Int. Geol. Rev. 46, 385–398 (2004)
Hickman, S. H. Stress in the lithosphere and the strength of active faults. Rev. Geophys. 29, 759–775 (1991)
Brune, J. N., Henyey, T. L. & Roy, R. F. Heat flow, stress, and rate of slip along the San Andreas fault, California. J. Geophys. Res. 74, 3821–3827 (1969)
Lachenbruch, A. H. & Sass, J. H. Heat flow and energetics of the San Andreas fault zone. J. Geophys. Res. 85, 6185–6222 (1980)
Scholz, C. H. Evidence for a strong San Andreas fault. Geology 28, 163–166 (2000)
Zoback, M. D. Strength of the San Andreas. Nature 405, 31–32 (2000)
Saffer, D. M., Bekins, B. A. & Hickman, S. Topographically driven groundwater flow and the San Andreas heat flow paradox revisited. J. Geophys. Res. 108 2274 10.1029/2002JB001849 (2003)
Lachenbruch, A. H. & Sass, J. H. Heat flow from Cajon Pass, fault strength, and tectonic implications. J. Geophys. Res. 97, 4995–5015 (1992)
Zoback, M. D. et al. New evidence on the state of stress of the San Andreas fault system. Science 238, 1105–1111 (1987)
Inoue, A. & Utada, M. Smectite-to-chlorite transformation in thermally metamorphosed volcanoclastic rocks in the Kamikita area, northern Honshu, Japan. Am. Mineral. 76, 628–640 (1991)
Rice, J. R. in Fault Mechanics and Transport Properties of Rocks (eds Evans, B. & Wong, T.-f.) 475–503 (Academic, 1992)
Tembe, S., Lockner, D. & Wong, T.-f. Constraints on the stress state of the San Andreas fault with analysis based on core and cuttings from San Andreas Observatory at Depth (SAFOD) drilling phases 1 and 2. J. Geophys. Res. 114 B11401 10.1029/2008JB005883 (2009)
Acknowledgements
We thank B. Weymer, J. Firth and P. Nelson for their assistance and patience in providing the core material. Comments from W. Ellsworth, D. Faulkner and R. Simpson significantly improved the manuscript.
Author information
Authors and Affiliations
Contributions
C.M. and D.A.L. conducted deformation experiments, D.M. provided petrographic analysis and XRD measurements, and S.H. provided borehole logging results and related stress analysis.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
This file contains Supplementary Text and Supplementary Figures 1-3 with legends. (PDF 871 kb)
Rights and permissions
About this article
Cite this article
Lockner, D., Morrow, C., Moore, D. et al. Low strength of deep San Andreas fault gouge from SAFOD core. Nature 472, 82–85 (2011). https://doi.org/10.1038/nature09927
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nature09927
This article is cited by
-
Stress field in northeastern Japan and its relationship with faults of recent earthquakes
Earth, Planets and Space (2024)
-
Dynamic Pulverization of Rock Under Triaxial Static-Stress and High-Rate Shearing
Rock Mechanics and Rock Engineering (2024)
-
Major southern San Andreas earthquakes modulated by lake-filling events
Nature (2023)
-
Fault strength and rupture process controlled by fault surface topography
Nature Geoscience (2023)
-
Physical state of water controls friction of gabbro-built faults
Nature Communications (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.