Correction to: Scientific Reports https://doi.org/10.1038/s41598-017-10450-7, published online 29 August 2017
The original version of this Article omitted an additional affiliation for the authors Mu Qiao, Honglin Liu and Shensheng Han. The correct affiliations for these authors are listed below:
Key Laboratory for Quantum Optics and Center for Cold Atom Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, 201800.
University of Chinese Academy of Sciences, Beijing, 100049, China.
This has now been corrected in the HTML and PDF versions of this Article.
Author information
Authors and Affiliations
Corresponding author
Additional information
The original article can be found online at https://doi.org/10.1038/s41598-017-10450-7.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Qiao, M., Liu, H., Pang, G. et al. Author Correction: Non-invasive three-dimension control of light between turbid layers using a surface quasi-point light source for precorrection. Sci Rep 8, 6006 (2018). https://doi.org/10.1038/s41598-018-23757-w
Published:
DOI: https://doi.org/10.1038/s41598-018-23757-w
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
