Article | Open | Published:

Bacterial community diversity on in-shell walnut surfaces from six representative provinces in China

Scientific Reportsvolume 7, Article number: 10054 (2017) | Download Citation

Abstract

Walnuts (Juglans regia) have been associated with foodborne illness outbreaks in recent years. Thus, the purpose of this study was to investigate the distribution of bacteria on in-shell walnut surfaces from six representative provinces in China. The bacterial populations on walnut surfaces were investigated by high-throughput sequencing based on the bacterial 16 S rRNA hypervariable region V4. Twenty-eight samples were collected from fourteen regions in six provinces and harvested in different periods (the fresh in 2016 and the old in 2015). Proteobacteria was the most dominant phylum in all samples except for XJ1. In XJ1, and the most abundant phylum was Cyanobacteria, which also accounted for a large proportion of the abundance in YN1, YN11, XJ2 and SC11. In addition, Firmicutes and Actinobacteria were also the abundant phyla in the given samples. Some genera belonging to the opportunistic pathogens were detected, such as Pseudomonas, Acinetobacter, Burkholderia and Bacillus. The results revealed that the composition and abundance of bacterial consortiums on walnut surfaces varied among the geographical sites where they were harvested. Moreover, the storage time of samples also had impact on the abundance of bacteria. This study may provide a better understanding of the bacterial communities’ diversity on in-shell walnut surfaces.

Introduction

Walnuts (Juglans regia) contain many nutrients, including proteins, fatty acid, vitamin E, mineral, folate, melatonin, numerous polyphenols, etc.1, 2. The walnut is rising in popularity for its beneficial effects to the brain, the blood lipid profile, cardiovascular disease, diabetes and so on3, 4. For instance, walnuts can increase in human inferential verbal reasoning5 and have been associated with a reduced risk for cancer6, 7. In China, there are a large number of walnuts to export every year8. The production of in-shell walnuts reached 1.06 million metric tons in 20169.

The fleshy husks of walnuts are removed shortly after harvest, and then the in-shell walnuts are dried naturally or with forced air. Finally the walnuts may be stored before shelling or other processing. Due to the unique harvesting methods, the walnut surface is unavoidably infected by a number of microorganisms in the environment, and most likely to be re-infected during the process of storage, transportation and sales. These microorganisms may include some foodborne pathogens, such as Aspergillus, Salmonella, Shigella, Listeria monocytogenes, and Escherichia coli O157:H7 10, which can cause foodborne illness and even death in humans. Additionally, some bacteria and fungi can produce toxins, which are hardly to control during the processing. The fruits and nuts account for 7% of the total foodborne outbreaks11,12,13, resulting in serious concerns from food industry and local commniuties. Especially for tree nuts, such as walnuts, almonds, pistachios, and peanuts, there have been reported some outbreaks and recalls caused by bacterial pathogens14,15,16. Some studies have reported that these bacterial pathogens are able to survive in low-water activity foods for long-term storage17, 18. Blessington et al. also found that foodborne pathogens could survive not only in walnut kernels but also on in-shell walnut surfaces for a long time during storage19, 20. In China, since there are a few reports about nut-induced disease outbreaks, it is necessary to investigate the existence and distribution of bacterial pathogens on nut shells.

Currently, conventional culture-based assay and molecule-based methods are mainly used to detect these foodborne pathogens. The culture-based detection methods are time consuming and complex, and some non-culturable pathogens may be ignored. The molecule-based methods, such as PCR, qPCR, and mPCR, are frequently used because of time-efficient and labor-saving21, 22. While these methods also have limitations, they cannot reveal the diversity of overall pathogens in the samples. Nowadays, high-throughput sequencing (HTS) technology, also known as “next-generation” sequencing technology, can be used to characterize microbial community composition of complex environmental ecosystems. HTS technology has been applied in many fields to investigate the microbial diversity, including food samples23, 24, plants25, soil and water samples26,27,28,29,30.

The shells of nuts may prevent some direct contamination from the surface to the inner kernel31. Walnut kernels are completely wrapped by shells, thus most of the microorganisms are attached to the shells. Thin-skinned walnuts are easily broken, which may make the kernels being infected. In China, most of raw walnuts are directly consumed and usually added to foods as main gradients, resulting in great risks for consumers to expose to the potential pathogens. Thus, it is required to investigate the microbial diversity on walnut shells and provide basic information on target pathogens for designing effective pasteurization processes.

The objectives of this study were (1) to analyze the bacterial diversity on the surface of in-shell walnuts located in major producing regions in China, (2) to investigate the possible bacterial pathogens on the in-shell walnuts surface, and (3) to compare the changes of bacterial community among these samples in different regions and storage times.

Results

OTU-based analyses: richness and diversity indexes

A total of 1,867,565 effective tags obtained by HTS were clustered into operational taxonomic units (OTUs) based on 97% identity. An average of 224 OTUs were obtained, which varied from a minimum of 111 to a maximum of 369 OTUs per sample. In alpha diversity analysis, rarefaction curves, Chao1, and Shannon’s index were also generated to reflect community richness and diversity. All the indexes showed that the differences among samples did not follow a specific trend according to geography and times. The highest species richness occurred in YN1 according to rarefaction curves analysis of OTUs in the samples, which were confirmed by Chao1 index (Table 1). The trend of rarefaction curves suggested a sufficient sampling of the microbial communities (Fig. 1). Good’s coverage estimate showed high values, all above 99.9% (Table 1), indicating that the sequence numbers per sample were high enough to obtain complete coverage of the bacterial diversity.

Table 1 Summary of diversity indices for all studied samples.
Figure 1
Figure 1

Rarefaction curves of the twenty-eight samples.

OTU distribution from Venn plots and flower plots

Venn plots (samples <5) and flower plots (samples >5) were used to show the shared and unique OTUs in each plotted group. These plots more intuitively showed the unique and overlap of the OTU composition of the samples. The fresh samples (2016) shared 51 OTUs, which were slightly higher than those (43 OTUs) in 2015. The numbers of unique OTUs changed obviously among samples of Yunnan and Xinjiang provinces in 2015 and 2016 (Fig. 2). The XJ1 sample had the highest unique OTU numbers. According to the Venn plots or flower plots of the samples within the same province, the samples HB11, SC11 and SC21 had higher OUT numbers than those of HB1, SC1 and SC2 samples (see Supplementary Fig. S1).

Figure 2
Figure 2

Flower diagram of the OTUs in the twenty-eight samples (A) the fresh samples in 2016 and (B) the samples in 2015 in different regions. The numbers inside the diagram indicate the numbers of OTUs.

Bacterial community analysis

The initial numbers of colonies from walnut surfaces were detected simultaneously. The initial colonies in all samples were < 3.5 log (Table 1). The morphology of the colonies was diverse.

For high-throughput sequencing analysis, all the obtained sequences were taxonomically classified from phylum to genus. The twenty-eight samples appeared to have very similar 16 S rRNA profile in the phylum level. The ten largest phylum are shown in Fig. 3. Proteobacteria dominated the observed sequences at phylum level. Cyanobacteria phylum accounted for a large proportion of the sequences in XJ1 (63.59%), XJ2 (19.13%), SX1 (9.78%), SX11 (10.17%), HB2 (6.55%), YN1 (19.44%), YN11 (33.80%) and SC11 (36.38%). In addition, Firmicutes were high in XJ1 sample, accounting for 3.02%. Actinobacteria was the third largest phylum (1.32%) in the SX21 sample. Within Proteobacteria, Gammaproteobacteria was the most dominant group (54.9–99.4%) in these samples except for XJ1. Alphaproteobacteria and betaproteobacteria occupied a large part of the relative abundance in all samples. Enterobacteriales were the most abundant order within the Gammaproteobacteria. However, a much higher proportion of the unidentified sequences existed in all the samples. The proportion of Pseudomonades in all the samples was from 3.69% to 28.5%. The other seven dominant orders included Rickettsiales, Xanthomonadales, Sphingomonadales, Burkholderiales, Rhizobiales, Lactobacillales, and Rhodobacterales.

Figure 3
Figure 3

Composition of bacterial community at phylum level. The top ten phyla are shown, and the other phyla are included as “Others”.

Diversity of the samples became more evident at family level classification. Enterobacteriaceae were found in all samples with the relative abundance from 17.7% to 94.6% at family level. Microorganisms assigned to unidentified bacteria existed with a much higher proportion in YN1, YN11, XJ1, XJ2, and SC11. Pseudomonadaceae, Mitochondria and Xanthomonadaceae were comprised of the main remaining diversity for the samples at family level (Fig. 4).

Figure 4
Figure 4

Composition of bacterial community at family level. The top ten families are shown, and the other phyla are included as “Others”.

At the genus level, “Others” (the sum of the relative abundance of the genera except for the top ten) occupied a large percentage. The most abundant genus was Pseudomonas except for unidentified sequences. Stenotrophomonas, Novosphingobium, Rhizobium, Xanthomonas, Sphingomonas, and Acinetobacter were also abundant relative to other genera. The heat map was used to analyze the variety of the abundance of most genera in the twenty-eight samples (Fig. 5). Staphylococcus existed in many samples. Some possible pathogens were also found, such as Pseudomonas, Acinetobacter, Burkholderia and Bacillus.

Figure 5
Figure 5

Heat map of the top 35 genera for all the samples. The color intensity with the legend at the right of the figure indicates the relative values for each genus.

Beta diversity analysis

Principal Coordinates Analysis (PCoA) was performed to visualize and compare the relationship of the microbial communities among the twenty-eight samples. Based on PCoA of un-weighted UniFrac distance (Fig. 6A), the bacterial communities of the samples in Z2, Z3 and Z6 were more closely grouped according to PC1 (53.09%) and PC2 (28.37%). While the samples with different storage times from the same area were not grouped together. For example, S11 was closer to SX31 than S1. In Z1, the samples of the three regions were separated from each other, whereas samples in the same area at different times were closer with each other. XJ1 in Z5 was separated from all the other samples. The samples in Z6 were also separated from each other especially for the sample YN1. This result was consistent with Non-Metric Multi-Dimensional Scaling (NMDS) (Fig. 6B), which could better reflect the nonlinear structure of ecological data. The un-weighted UniFrac distance cluster analysis was used to show the similarity between different samples. The results of UPGMA clustering tree confirmed those of PCoA and NMDS (Fig. 7).

Figure 6
Figure 6

PCoA (A) and NMDS plot analysis (B) based on un-weighted Unifrac metrics for all samples.

Figure 7
Figure 7

UPGMA clustering tree based on un-weighted Unifrac distance. The relative abundances of the top ten phyla in all samples are indicated, and the rest phyla are indicated as ‘Others’.

Discussion

This study provides the diversity of bacterial community on the in-shell walnut surface based on the high-throughput sequencing method. Proteobacteria, Firmicutes, Bacteroidetes, and Acinetobacteria were the dominant phyla in the taxonomic groups of all the samples. These phyla present in many environments and food samples, although the relative abundances vary in these samples32,33,34,35. Gammaproteobacteria, Alphaproteobacteria and Betaproteobacteria were the three main classes within Proteobacteria. These classes were also found in the tomato fruit surface and some plant species36, 37. Cyanobacteria are ubiquitous microorganisms, and may synthesize algal toxins38, 39. Cyanobacteria existed in all the samples with an obvious change in abundance in this study. Cyanobacteria also constituted significant portion in soil microbes40. Thus the existence of Cyanobacteria might be due to soil or water sources in different areas. Actinobacteria are minor microbes in soils and play an important role in natural ecosystems26. Actinobacteria were also found in some food materials like cocoa beans41. Acidobacteria, Bacteroidetes and Chloroflexi were ubiquitous in natural environments26, 42 and were in the top ten phyla in this study. The walnut surfaces might be infected by these bacteria through the soil and water in the environment during the walnut harvesting and processing.

There was a high proportion of bacteria identified as the family Enterobacteriaceae in this study. Some important human pathogenic bacteria are included in this family and they can spread easily among humans. This family had high adaptability on the walnut surface according to the results. Thus it might be associated to the higher risk of disease outbreaks associated with walnuts. However, sequences for major foodborne pathogens genera were not found.

The identification at genus level based on the V4 region of the 16 S rDNA presented a more diverse bacterial community on the in-shell walnut surface. Genera here found were unlike those in some fermented foods and seafood23, 34, 43, 44. The distribution of the bacteria was more similar to that in soil and water samples at genus level. This might be related to the environment that walnuts are exposed. Pseudomonas and Stenotrophomonas are both widely distributed in soil and water. Walnuts are the field-grown crop and may be completely exposed to the external environment during processing, thus they are easy to be infected by these two genera. Stenotrophomonas is an opportunistic pathogen genus although it may have beneficial effects on plant growth45. Sphingomonas were found to be more abundant in SX21 than other samples and also observed in the abalone samples44. Acinetobacter can cause disease under certain conditions and mainly exist in water and soil. This genus appeared in all the samples in this study and had also been found in raw milk33. The Burkholderia genus has a great threat to human health, even though it may be beneficial to plants46. In our study, Burkholderia was the relatively lower abundant genus found in twenty-four samples. The genus Staphylococcus was also identified with low abundance in the samples, since it is a potential pathogen genus and may sometimes lead to safety hazards. The presence of these potential pathogens genera suggests that the walnuts industry should have a standardized management to meet food safety requirements. The presence of the unidentified-chloroplast in the samples was consistent with Cyanobacteria, which may have impacted on the taxa of bacteria47.

From the alpha diversity analysis and Beta diversity analysis, we can know that the microbial richness differs in different samples. The cluster analysis suggests that the geographic conditions and storage time have a certain impact on the abundance of bacteria on these samples. The differences among walnut surface environments appear to be linked to the plant conditions in different locations. These results in this study were similar to those of the tomato surface37. Zhou et al. also pointed that the cecal microbiota of Tibetan chickens differed due to geographic location35. The abundance of bacterial on in-shell walnut surface with different storage times varied even though they were harvested in the same region. The effect of storage time on the abundance of bacteria was more obvious in XJ1 and XJ11, YN1 and YN11. This might be caused by storage conditions like temperature and humidity18, 44.

In addition, the walnut varieties may be linked to the diversity of bacteria because of their shells. Some samples may be more easily attached and result in the bacteria being hardly washed away by water according to their uneven shells. The study of the spinach confirmed that the leaf surface topography had impact on the spinach epiphytic bacterial community48. Some pretreatment processes for the walnuts like drying, sterilization and bleach may also impact the bacteria abundance. These treatments could affect the microbial growth and survival especially for some major pathogens49,50,51.

Conclusion

It is essential to investigate the bacterial diversity on in-shell walnut surface for food safety. This study showed the bacterial diversity on in-shell walnut surface from different locations and storage times based on high throughput sequencing technology. Similar to many materials, Proteobacteria accounted for a large proportion of abundance in the phylum in all the samples. While different from some food materials at genus level, the distributions of bacterial communities on in-shell walnut surface were similar to those in some materials like soils, waters or some field-grown crops. The taxonomies of the bacterial communities of most samples were similar, while the abundances of the taxa were different among these samples. The composition of the bacterial community on in-shell walnut surfaces varied slightly. However, the abundance of these bacteria varied with locations and storage times. The results of the representative samples can provide an important contribution to the understanding of the bacterial communities on in-shell walnut surface. The distribution of bacteria on in-shell walnut surfaces also provided basic information on target pathogens for pasteurization. In this study, we just collected samples in six main producing provinces without considering the varieties, storage conditions and other factors. To better study the factors affecting microbial community on in-shell walnut surfaces, further studies need to be conducted to cover more walnut varieties, the storage conditions, and pre-treatment methods.

Materials and Methods

Sample collection

In-shell walnuts were collected from fourteen areas, which were major walnut-producing areas in China (Fig. 8). The samples were collected from May to October in 2016, including the fresh walnuts harvested in 2016 and the stored samples harvested in 2015 (Table 1). The storage times of the samples harvested in 2015 were not more than one year. These samples were collected from local suppliers or markets and were all stored in the warehouse before the sale. The walnut samples from the same province were put into the same group (Table 1). The collected samples were stored at 4 °C. Ten walnuts with the similar size of each sample were selected randomly for further experiments.

Figure 8
Figure 8

Sampling sites of walnuts (the original figure was available at http://www.map1000.com/, and then updated with mapinfo8.5). Samples were obtained from fourteen regions including the fresh walnuts in 2016 and the stored walnuts harvested in 2015.


Isolation of bacteria from in-shell walnut surface

The ten in-shell walnuts were placed in a sterile erlenmeyer flask containing 500 mL of 1% (w/v) peptone water supplemented with 1% (v/v) Tween-80. Then the erlenmeyer flask was vigorously shaken for approximately 20 min to thoroughly wash the surface of the in-shell walnuts14, 52. Finally the suspension was filtered over a sterile polycarbonate membrane (0.22 μm pore size) held in a sterilized filtration device. The membranes containing the bacterial filtrates were placed in sterilized centrifuge tubes and then stored at −80 °C until the DNA extraction step. The initial bacteria on the in-shell walnut surface without pre-cultured were also detected. Aerobic plate counts (APC) were determined by the pour plating method, and colonies were recorded as CFU/mL53.


Extraction of total DNAs

Total DNAs were directly extracted from samples using the standardization CTAB method54. Briefly, the samples were added to the lysate containing lysozyme and 1000 μL CTAB buffer. The total DNA was extracted with chloroform: isoamyl alcohol (24:1) and precipitated with isopropanol at −20 °C. Then the precipitation was washed twice with 75% ethanol and dissolved with ddH2O. Finally, 1 μL RNase A was added to digest RNA at 37 °C for 15 min. DNA concentration and purity were examined by electrophoresis on 1% agarose gels. According to the concentration, DNA was diluted to 1 ng/μL using sterile water.


PCR amplification

The amplification of the V4 region of 16 S rRNA genes used the specific primer with the barcode, and the universal primer with a forward primer 515 F (5′-GTGCCAGCMGCCGCGGTAA-3′) and a reverse primer 806 R (5′-GGACTACHVGGGTWTCTAAT-3′)55. The PCR reaction was performed using Phusion® High-Fidelity PCR Master Mix with GC buffer (New England Biolabs, Ipswich, MA, USA) in a 30 μL total volume (15 μL phusion master mix, 6 μM primer, 10 μL gDNA, 2 μL H2O).

The PCR reaction steps were conducted with a denaturation step at 98 °C for 1 min, followed by 30 cycles (98 °C, 10 sec; 50 °C, 30 sec; 72 °C, 30 sec), then with a final extension step at 72 °C for 5 min. The products were detected by electrophoresis using 2% agarose gel, and samples with bright main strip between 400–450 bp were chosen for further experiments. The PCR products were mixed in equidensity ratios, and then the mixture PCR products were purified with Gene JET Gel Extraction Kit (Thermo Scientific).


High-throughput sequencing analysis

Sequencing libraries were generated using NEB Next® Ultra™ DNA Library Prep Kit for Illumina (NEB, USA) following manufacturer’s recommendations. After assessed on the Qubit@ 2.0 Fluorometer (Thermo Scientific) and Agilent Bioanalyzer 2100 system, the library was subjected to sequencing using Illumina HiSeq. 2500 platform at Nevogene (Beijing, China).

The paired-end reads were merged by using FLASH and then assigned to each sample according to the unique barcodes. The raw tags generated with FLASH were filtered and analyzed using QIIME software package56, 57. All effective reads from each sample were initially clustered into operational taxonomic units (OTUs) with ≥97% similarity. The RDP classifier58 was used to annotate taxonomic information for representative sequences of each OTU. The in-house Perl scripts were used to analyze alpha- (within samples) and beta- (among samples) diversity.

Additional information

Accession number: Raw sequences have been submitted to the NCBI Sequence Read Archive (SRA) under the accession number SRP112678.

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    Moyib, O. K., Falegbe, O. & Moyib, F. R. Potentials of raw and cooked walnuts (Tetracapidium conophorum) as sources of valuable nutrients for good health. Afr J Med Med Sci. 44, 311–320 (2015).

  2. 2.

    Tapsell, L. C. Health Benefits of Walnut Consumption. Int Soc Hortic Sci. 861, 409–416 (2010).

  3. 3.

    Aberomand, M. et al. Evaluation the effect of chronic walnut dietary on hyperglycemia, lipid profile and peripheral nerve conduction velocity in animal model of diabetes. Biochem Cell Arch. 16, 29–31 (2016).

  4. 4.

    Hayes, D., Angove, M. J., Tucci, J. & Dennis, C. Walnuts (Juglans regia) chemical composition and research in human health. Crit Rev. Food Sci. 56, 1231–1241 (2016).

  5. 5.

    Pribis, P. et al. Effects of walnut consumption on cognitive performance in young adults. Br J Nutr. 107, 1393–1401 (2012).

  6. 6.

    Nakanishi, M. et al. Effects of walnut consumption on colon carcinogenesis and microbial community structure. Ancer Prev Res. 9, 692–703 (2016).

  7. 7.

    Toner, C. D. Communicating clinical research to reduce cancer risk through diet: Walnuts as a case example. Nutr Res Pract. 8, 347–351 (2014).

  8. 8.

    Tian, J., Wu, Y., Wang, Y. & Han, F. Development and prospects of the walnut industry in China. Int Soc Hortic Sci. 861, 31–38 (2010).

  9. 9.

    Global Agricultural Information Network. China-Peoples Republic of tree nuts annual. Available at: https://gain.fas.usda.gov/Pages/Default.aspx. (Date of access: 18/06/2017) (2017).

  10. 10.

    Martinovic, T., Andjelkovic, U., Gajdosik, M. S., Resetar, D. & Josic, D. Foodborne pathogens and their toxins. J Proteomics. 147, 226–235 (2016).

  11. 11.

    Brandl, M. T., Cox, C. E. & Teplitski, M. Salmonella interactions with plants and their associated microbiota. Phytopathol. 103, 316–325 (2013).

  12. 12.

    White, A., Cronquist, A., Bedrick, E. J. & Scallan, E. Food source prediction of Shiga toxin-producing Escherichia coli outbreaks using demographic and outbreak characteristics, United States, 1998-2014. Foodborne Pathog Dis. 13, 527–534 (2016).

  13. 13.

    Nsoesie, E. O., Kluberg, S. A. & Brownstein, J. S. Online reports of foodborne illness capture foods implicated in official foodborne outbreak reports. Prev Med. 67, 264–269 (2014).

  14. 14.

    Isaacs, S. et al. An international outbreak of salmonellosis associated with raw almonds contaminated with a rare phage type of Salmonella enteritidis. J. Food Prot. 68, 191–198 (2005).

  15. 15.

    Harris, L. J., Palumbo, M., Beuchat, L. R., and Danyluk, M. D. Outbreaks of foodborne illness associated with the consumption of tree nuts, peanuts, and sesame seeds. In outbreaks from tree nuts, peanuts, and sesame seeds. Available at http://ucfoodsafety.ucdavis.edu/Nuts_and_Nut_Pastes. (Date of access: 18/06/2017) (2017).

  16. 16.

    Palumbo, M., Beuchat, L.R., Danyluk, M.D., Harris, L.J. Recalls of tree nuts and peanuts in the U.S., 2001 to present. In U.S. recalls of nuts. Available at: http://ucfoodsafety.ucdavis.edu/Nuts_and_Nut_Pastes. (Date of access: 18/06/2017) (2017).

  17. 17.

    Beuchat, L. R. et al. Low-water activity foods: increased concern as vehicles of foodborne pathogens. J Food Prot. 76, 150–172 (2013).

  18. 18.

    Brar, P. K., Proano, L. G., Friedrich, L. M., Harris, L. J. & Danyluk, M. D. Survival of Salmonella, Escherichia coli O157:H7, and Listeria monocytogenes on raw peanut and pecan kernels stored at −24, 4, and 22 °C. J Food Prot. 78, 323–332 (2015).

  19. 19.

    Blessington, T., Mitcham, E. J. & Harris, L. J. Survival of Salmonella enterica, Escherichia coli O157:H7, and Listeria monocytogenes on inoculated walnut kernels during storage. J Food Prot. 75, 245–254 (2012).

  20. 20.

    Blessington, T., Theofel, C. G., Mitcham, E. J. & Harris, L. J. Survival of foodborne pathogens on inshell walnuts. Int J Food Microbiol. 166, 341–348 (2013).

  21. 21.

    Ma, K. et al. Rapid and simultaneous detection of Salmonella, Shigella, and Staphylococcus aureus in fresh pork using a multiplex real-time PCR assay based on immunomagnetic separation. Food Control. 42, 87–93 (2014).

  22. 22.

    Xu, Y. G. et al. Development of a novel target-enriched multiplex PCR (Tem-PCR) assay for simultaneous detection of five foodborne pathogens. Food Control. 64, 54–59 (2016).

  23. 23.

    Liu, T. et al. Prevalence and diversity of lactic acid bacteria in Chinese traditional sourdough revealed by culture dependent and pyrosequencing approaches. LWT-Food Sci Technol. 68, 91–97 (2016).

  24. 24.

    Lusk, T. S. et al. Characterization of microflora in Latin-style cheeses by next-generation sequencing technology. BMC Microbiol. 12, 1–10 (2012).

  25. 25.

    Ding, T. & Melcher, U. Influences of plant species, season and location on leaf endophytic bacterial communities of non-cultivated plants. PLoS One. 11, e0150895 (2016).

  26. 26.

    Chen, Y. et al. Distribution of bacterial communities across plateau freshwater lake and upslope soils. J Environ Sci (China). 43, 61–69 (2016).

  27. 27.

    Smets, W. et al. A method for simultaneous measurement of soil bacterial abundances and community composition via 16S rRNA gene sequencing. Soil Biol Biochem. 96, 145–151 (2016).

  28. 28.

    Li, B., Ju, F., Cai, L. & Zhang, T. Profile and fate of bacterial pathogens in sewage treatment plants revealed by high-throughput metagenomic approach. Environ Sci Technol. 49, 10492–10502 (2015).

  29. 29.

    Chao, Y., Mao, Y., Wang, Z. & Zhang, T. Diversity and functions of bacterial community in drinking water biofilms revealed by high-throughput sequencing. Sci Rep. 5, 10044 (2015).

  30. 30.

    Zhang, L. et al. Bacterial and archaeal communities in the deep-sea sediments of inactive hydrothermal vents in the Southwest India Ridge. Sci Rep. 6, 25982 (2016).

  31. 31.

    Pao, S., Kalantari, A. & Huang, G. Utilizing acidic sprays for eliminating Salmonella enterica on raw almonds. J Food Sci. 71, M14–M19 (2006).

  32. 32.

    Dalmasso, A. et al. Characterization of microbiota in plaisentif cheese by high-throughput sequencing. LWT-Food Sci Technol. 69, 490–496 (2016).

  33. 33.

    Quigley, L. et al. The complex microbiota of raw milk. FEMS Microbiol Rev. 37, 664–698 (2013).

  34. 34.

    Chen, H., Wang, M., Lin, X., Shi, C. & Liu, Z. Bacterial microbiota profile in gills of modified atmosphere-packaged oysters stored at 4 °C. Food Microbiol. 61, 58–65 (2017).

  35. 35.

    Zhou, X. et al. Cecal microbiota of Tibetan Chickens from five geographic regions were determined by 16S rRNA sequencing. Microbiol Open. 5, 753–762 (2016).

  36. 36.

    Redford, A. J., Bowers, R. M., Knight, R., Linhart, Y. & Fierer, N. The ecology of the phyllosphere: geographic and phylogenetic variability in the distribution of bacteria on tree leaves. Environ Microbiol. 12, 2885–2893 (2010).

  37. 37.

    Telias, A., White, J. R., Pahl, D. M., Ottesen, A. R. & Walsh, C. S. Bacterial community diversity and variation in spray water sources and the tomato fruit surface. BMC Microbiol. 11, 81 (2011).

  38. 38.

    Ininbergs, K., Bergman, B., Larsson, J. & Ekman, M. Microbial metagenomics in the baltic sea: recent advancements and prospects for environmental monitoring. Ambio. 44, 439–450 (2015).

  39. 39.

    Merel, S. et al. State of knowledge and concerns on cyanobacterial blooms and cyanotoxins. Environ Int. 59, 303–327 (2013).

  40. 40.

    Loganathachetti, D. S., Sadaiappan, B., Poosakkannu, A. & Muthuraman, S. Pyrosequencing-based seasonal observation of prokaryotic diversity in pneumatophore-associated soil of avicennia marina. Curr Microbiol. 72, 68–74 (2016).

  41. 41.

    Bortolini, C., Patrone, V., Puglisi, E. & Morelli, L. Detailed analyses of the bacterial populations in processed cocoa beans of different geographic origin, subject to varied fermentation conditions. Int J Food Microbiol. 236, 98–106 (2016).

  42. 42.

    Zhang, J., Sun, Q., Zeng, Z., Chen, S. & Sun, L. Microbial diversity in the deep-sea sediments of Iheya North and Iheya Ridge, Okinawa Trough. Microbiol Res. 177, 43–52 (2015).

  43. 43.

    Polka, J., Rebecchi, A., Pisacane, V., Morelli, L. & Puglisi, E. Bacterial diversity in typical Italian salami at different ripening stages as revealed by high-throughput sequencing of 16S rRNA amplicons. Food Microbiol. 46, 342–356 (2015).

  44. 44.

    Lee, M. J., Lee, J. J., Chung, H. Y., Choi, S. H. & Kim, B. S. Analysis of microbiota on abalone (Haliotis discus hannai) in south Korea for improved product management. Int J Food Microbiol. 234, 45–52 (2016).

  45. 45.

    Ryan, R. P. et al. The versatility and adaptation of bacteria from the genus. Stenotrophomonas. Nat Rev Microbiol. 7, 514–525 (2009).

  46. 46.

    Compant, S., Nowak, J., Coenye, T., Clement, C. & Ait Barka, E. Diversity and occurrence of Burkholderia spp. in the natural environment. FEMS Microbiol Rev. 32, 607–626 (2008).

  47. 47.

    Bonen, L. & Doolittle, W. F. Partial sequences of 16S rRNA and the phylogeny of blue-green algae and chloroplasts. Nat. 261, 669–673 (1976).

  48. 48.

    Lopez-Velasco, G., Welbaum, G. E., Falkinham Iii, J. O. & Ponder, M. A. Phyllopshere bacterial community structure of spinach (Spinacia oleracea) as affected by cultivar and environmental conditions at time of harvest. Diversity. 3, 721–738 (2011).

  49. 49.

    Liu, C. Q. et al. Effect of isrradiation sterilization on the quality of walnut powder. J Nucl Agric Sci. 23, 825–828 (2009).

  50. 50.

    Hussain, S. Z., Ahad, T., Rather, A. H., Naik, H. R., Idrees, S. Design fabrication and evaluation of walnut bleacher. J Food Process Eng. doi:10.1111/jfpe.12462 (2016).

  51. 51.

    Gao, M., Tang, J., Villa-Rojas, R., Wang, Y. & Wang, S. Pasteurization process development for controlling Salmonella in in-shell almonds using radio frequency energy. J. Food Eng. 104, 299–306 (2011).

  52. 52.

    Lopez-Velasco, G., Tydings, H. A., Boyer, R. R., Falkinham, J. O. & Ponder, M. A. Characterization of interactions between Escherichia coli O157:H7 with epiphytic bacteria in vitro and on spinach leaf surfaces. Int J Food Microbiol. 153, 351–357 (2012).

  53. 53.

    AOAC. Association of official analytical chemists. Official methods of analysis (15th ed.). Arlington, VA: AOAC (1990).

  54. 54.

    Lutz, K. A., Wang, W. Q., Zdepski, A. & Michael, T. P. Isolation and analysis of high quality nuclear DNA with reduced organellar DNA for plant genome sequencing and resequencing. BMC Biotechno. 11, 54 (2011).

  55. 55.

    Caporaso, J. G. et al. Colloquium paper: global patterns of 16S rRNA diversity at a depth of millions of sequences per sample. P Natl Acda Sci USA. 108, 4516–4522 (2011).

  56. 56.

    Bokulich, N. A. et al. Quality-filtering vastly improves diversity estimates from Illumina amplicon sequencing. Nat Methods. 10, 57–59 (2012).

  57. 57.

    Magoc, T. & Salzberg, S. L. FLASH: fast length adjustment of short reads to improve genome assemblies. Bioinformatics. 27, 2957–2963 (2011).

  58. 58.

    Cole, J. R. et al. Ribosomal Database Project: data and tools for high throughput rRNA analysis. Nucleic Acids Res. 42, D633–D642 (2014).

Download references

Acknowledgements

This research was conducted in the College of Mechanical and Electronic Engineering, Northwest A&F University, and supported by research grants from General Program of National Natural Science Foundation of China (31371853). The authors thank Professor Lu Xin for providing equipment in conducting experiments.

Author information

Affiliations

  1. College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling, Shaanxi, 712100, China

    • Lihui Zhang
    •  & Shaojin Wang
  2. Department of Biological Systems Engineering, Washington State University, Pullman, WA, 99164-6120, USA

    • Shaojin Wang

Authors

  1. Search for Lihui Zhang in:

  2. Search for Shaojin Wang in:

Contributions

L.H.Z.: Performing experiment and data analysis, drafting of the manuscript; S.W.: Concept design, assisting experiment and critical revision of the manuscript.

Competing Interests

The authors declare that they have no competing interests.

Corresponding author

Correspondence to Shaojin Wang.

Electronic supplementary material

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/s41598-017-10138-y

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.