Abstract
Carbonate electrolytes are commonly used in commercial non-aqueous Li-ion batteries. However, the high affinity between the solvents and the ions and high flammability of the carbonate electrolytes limits the battery operation temperature window to −20 to + 50 °C and the voltage window to 0.0 to 4.3 V. Here, we tame the affinity between solvents and Li ions by dissolving fluorinated electrolytes into highly fluorinated non-polar solvents. In addition to their non-flammable characteristic, our electrolytes enable high electrochemical stability in a wide voltage window of 0.0 to 5.6 V, and high ionic conductivities in a wide temperature range from −125 to + 70 °C. We show that between −95 and + 70 °C, the electrolytes enable LiNi0.8Co0.15Al0.05O2 cathodes to achieve high Coulombic efficiencies of >99.9%, and the aggressive Li anodes and the high-voltage (5.4 V) LiCoMnO4 to achieve Coulombic efficiencies of >99.4% and 99%, respectively. Even at −85 °C, the LiNi0.8Co0.15Al0.05O2 || Li battery can still deliver ~50% of its room-temperature capacity.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.
References
Whittingham, M. S. Ultimate limits to intercalation reactions for lithium batteries. Chem. Rev. 114, 11414–11443 (1976).
Cheng, X. B., Zhao, C. Z., Yao, Y. X., Liu, H. & Zhang, Q. Recent advances in energy chemistry between solid-state electrolyte and safe lithium metal anodes. Chem 5, 74–96 (2019).
Assat, G. & Tarascon, J. M. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries. Nat. Energy 3, 373–386 (2018).
Armand, M. & Tarascon, J. M. Building better batteries. Nature 451, 652–657 (2008).
Lin, D., Liu, Y. & Cui, Y. Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 12, 194–206 (2017).
Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016).
Sun, Y.-K. et al. Nanostructured high-energy cathode materials for advanced lithium batteries. Nat. Mater. 11, 942–947 (2012).
Zhu, C., Usiskin, R. E., Yu, Y. & Maier, J. The nanoscale circuitry of battery electrodes. Science 358, eaao2808 (2017).
Lee, J. et al. Reversible Mn2+/Mn4+ double redox in lithium-excess cathode materials. Nature 556, 185–190 (2018).
Dunn, B., Kamath, H. & Tarascon, J.-M. Electrical energy storage for the grid: a battery of choices. Science 334, 928–935 (2011).
Noorden, R. V. The rechargeable revolution: a better battery. Nature 507, 26–28 (2014).
Yang, X.-G., Zhang, G., Ge, S. & Wang, C.-Y. Fast charging of lithium-ion batteries at all temperatures. Proc. Natl Acad. Sci. USA 115, 7266–7271 (2018).
Zhang, S. S., Xu, K. & Jow, T. R. A new approach toward improved low temperature performance of Li-ion battery. Electrochem. Commun. 4, 928–932 (2002).
Smart, M. C., Whitacre, J. F., Ratnakumar, B. V. & Amine, K. Electrochemical performance and kinetics of Li1 + x(Co1/3Ni1/3Mn1/3)1 − xO2 cathodes and graphite anodes in low-temperature electrolytes. J. Power Sources 168, 501–508 (2007).
Stuart, T. A. & Hande, A. HEV battery heating using AC currents. J. Power Sources 129, 368–378 (2004).
Wang, C.-Y. et al. Lithium-ion battery structure that self-heats at low temperatures. Nature 529, 515–518 (2016).
Rustomji, C. S. et al. Liquefied gas electrolytes for electrochemical energy storage devices. Science 356, aal4263 (2017).
Dong, X., Guo, Z., Guo, Z., Wang, Y. & Xia, Y. Organic batteries operated at −70 °C. Joule 2, 902–913 (2018).
Dong, X. et al. High energy rechargeable metallic lithium battery at −70 °C enabled by a co-solvent electrolyte. Angew. Chem. 131, 5679–5683 (2019).
Xu, K. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. Chem. Rev. 104, 4303–4418 (2004).
Fan, X. et al. Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries. Nat. Nanotechnol. 13, 715–722 (2018).
Ramakumar, S., Satyanarayana, L., Manorama, S. V. & Murugan, R. Structure and Li+ dynamics of Sb-doped Li7La3Zr2O12 fast lithium ion conductors. Phys. Chem. Chem. Phys. 15, 11327–11338 (2013).
Kamaya, N. et al. A lithium superionic conductor. Nat. Mater. 10, 682–686 (2011).
Croce, F., Focarete, M. L., Hassoun, J., Meschini, I. & Scrosati, B. A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning. Energy Environ. Sci. 4, 921–927 (2011).
Gu, G. Y. et al. 2-Methoxyethyl (methyl) carbonate-based electrolytes for Li-ion batteries. Electrochim. Acta 45, 3127–3139 (2000).
Miara, L. J., Richards, W. D., Wang, Y. E. & Ceder, G. First-principles studies on cation dopants and electrolyte|cathode interphases for lithium garnets. Chem. Mater. 27, 4040–4047 (2015).
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C. & Ceder, G. Interface stability in solid-state batteries. Chem. Mater. 28, 266–273 (2016).
Hamon, Y. et al. Influence of sputtering conditions on ionic conductivity of LiPON thin films. Solid State Ion. 177, 257–261 (2006).
Dudney, N. J. Addition of a thin-film inorganic solid electrolyte (Lipon) as a protective film in lithium batteries with a liquid electrolyte. J. Power Sources 89, 176–179 (2000).
Cini, R. & Torrini, M. Temperature dependence of the magnetic susceptibility of water. J. Chem. Phys. 49, 2826–2830 (1968).
Skarmoutsos, I., Ponnuchamy, V., Vetere, V. & Mossa, S. Li+ solvation in pure, binary, and ternary mixtures of organic carbonate electrolytes. J. Phys. Chem. C 119, 4502–4515 (2015).
Lu, Y., Tu, Z. & Archer, L. A. Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. Nat. Mater. 13, 961–969 (2014).
Choudhury, S. & Archer, L. A. Lithium fluoride additives for stable cycling of lithium batteries at high current densities. Adv. Electron. Mater. 2, 1500246 (2016).
Fan, X. et al. Highly fluorinated interphases enable high-voltage Li-metal batteries. Chem 4, 174–185 (2018).
Bi, K., Zhao, S. X., Huang, C. & Nan, C. W. Improving low-temperature performance of spinel LiNi0.5Mn1.5O4 electrode and LiNi0.5Mn1.5O4/Li4Ti5O12 full-cell by coating solid-state electrolyte Li-Al-Ti-P-O. J. Power Sources 389, 240–248 (2018).
Fetcenko, M. A. et al. Recent advances in NiMH battery technology. J. Power Sources 165, 544–551 (2007).
Evarts, E. C. Lithium batteries: to the limits of lithium. Nature 526, S93 (2015).
Xu, K., Zhang, S., Allen, J. L. & Jow, T. R. Nonflammable electrolytes for Li-ion batteries based on a fluorinated phosphate. J. Electrochem. Soc. 149, A1079–A1082 (2002).
Suo, L. et al. “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries. Science 350, 938–943 (2015).
Wang, J. et al. Fire-extinguishing organic electrolytes for safe batteries. Nat. Energy 3, 22–29 (2018).
Han, F. et al. Interphase engineering enabled all-ceramic lithium battery. Joule 2, 497–508 (2018).
Chen, L. et al. Achieving high energy density through increasing the output voltage: a highly reversible 5.3 V battery. Chem 5, 896–912 (2019).
Hayashi, A., Hama, S., Morimoto, H., Tatsumisago, M. & Minami, T. Preparation of Li2S–P2S5 amorphous solid electrolytes by mechanical milling. J. Am. Ceram. Soc. 84, 477–479 (2001).
Suo, L., Hu, Y.-S., Li, H., Armand, M. & Chen, L. A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries. Nat. Commun. 4, 1481 (2013).
Plimpton, S. Fast parallel algorithms for short-range molecular dynamics. J. Comput. Phys. 117, 1–19 (1995).
Frisch, M. J. et al. Gaussian 09, Rev E. 01. Wallingford CT: Gaussian, Inc. (2013).
Hohenberg, P. & Kohn, W. Inhomogeneous electron gas. Phys. Rev. 136, B864–B871 (1964).
Kresse, G. & Hafner, J. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium. Phys. Rev. B 49, 14251–14269 (1994).
Kohn, W. & Sham, L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133–A1138 (1965).
Momma, K. & Izumi, F. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J. Appl. Crystallogr. 44, 1272–1276 (2011).
Humphrey, W., Dalke, A. & Schulten, K. VMD: visual molecular dynamics. J. Mol. Graph. 14, 33–38 (1996).
Jakalian, A., Jack, D. B. & Bayly, C. I. Fast, efficient generation of high-quality atomic charges. AM1-BCC model: II. Parameterization and validation. J. Comput. Chem. 23, 1623–1641 (2002).
Jakalian, A., Bush, B. L., Jack, D. B. & Bayly, C. I. Fast, efficient generation of high-quality atomic charges. AM1-BCC model: I. Method. J. Comput. Chem. 21, 132–146 (2000).
Wang, J., Wang, W., Kollman, P. A. & Case, D. A. Automatic atom type and bond type perception in molecular mechanical calculations. J. Mol. Graph. Model. 25, 247–260 (2006).
Chen, F. & Forsyth, M. Elucidation of transport mechanism and enhanced alkali ion transference numbers in mixed alkali metal–organic ionic molten salts. Phys. Chem. Chem. Phys. 18, 19336–19344 (2016).
Shimizu, K., Almantariotis, D., Gomes, M. F. C., Pádua, A. A. H. & Canongia Lopes, J. N. Molecular force field for ionic liquids V: hydroxyethylimidazolium, dimethoxy-2- methylimidazolium, and fluoroalkylimidazolium cations and bis(fluorosulfonyl)amide, perfluoroalkanesulfonylamide, and fluoroalkylfluorophosphate anions. J. Phys. Chem. B 114, 3592–3600 (2010).
Tsuzuki, S. et al. Molecular dynamics simulations of ionic liquids: cation and anion dependence of self-diffusion coefficients of ions. J. Phys. Chem. B 113, 10641–10649 (2009).
Borodin, O. et al. Competitive lithium solvation of linear and cyclic carbonates from quantum chemistry. Phys. Chem. Chem. Phys. 18, 164–175 (2016).
Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Acknowledgements
This work was supported by the US Department of Energy (DOE) under award number DEEE0008202. The authors acknowledge the University of Maryland supercomputing resources (http://hpcc.umd.edu) made available for conducting the research reported in this paper.
Author information
Authors and Affiliations
Contributions
X.F., X.J. and Long Chen designed the experiments and analysed data. X.F., L.C., J.C., T.D., N.P., X.X. and Lixin Chen conducted the electrochemical experiments. X.J. and R.W. conducted the calculations. X.F. and J.C. performed the XPS and Raman analysis. F.H. and J.Y. synthesized the solid-state electrolytes. X.Z. conducted the MPMS analysis. X.F. wrote the draft manuscript. X.F., X.J., Long Chen and C.W. revised the manuscript. C.W. conceived and supervised the project. All the authors contributed to the interpretation of the results.
Corresponding author
Ethics declarations
Competing interest
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary notes, Tables 1–2 and Figs. 1–24.
Supplementary Video 1
Electric fan powered by the NCA || Li pouch cell using 1.28 M LiFSI-FEC/FEMC–D2 electrolyte at −95 °C.
Supplementary Video 2
Flammability test for the conventional 1 M LiPF6-EC/DMC electrolyte.
Supplementary Video 3
Flammability test for the water-in-salt electrolyte.
Supplementary Video 4
Flammability test for the superelectrolyte (1.28 M LiFSI-FEC/FEMC–D2).
Supplementary Video 5
Flammability test for the Li3PS4 solid-state electrolyte.
Supplementary Video 6
Flammability test for the Li10GeP2S12 solid-state electrolyte.
Rights and permissions
About this article
Cite this article
Fan, X., Ji, X., Chen, L. et al. All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents. Nat Energy 4, 882–890 (2019). https://doi.org/10.1038/s41560-019-0474-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41560-019-0474-3
This article is cited by
-
Molecular anchoring of free solvents for high-voltage and high-safety lithium metal batteries
Nature Communications (2024)
-
A dicarbonate solvent electrolyte for high performance 5 V-Class Lithium-based batteries
Nature Communications (2024)
-
Safe electrolyte for long-cycling alkali-ion batteries
Nature Sustainability (2024)
-
Ligand-channel-enabled ultrafast Li-ion conduction
Nature (2024)
-
Single-phase local-high-concentration solid polymer electrolytes for lithium-metal batteries
Nature Energy (2024)