Scientific Reports 6: Article number: 27380; published online: 07 June 2016; updated: 25 August 2016
In this Article, Hwa Jen Yap, Siti Zawiah Md Dawal, S. Ramesh and Sin Ye Phoon are incorrectly affiliated to ‘Graduate School of Media Design, Keio University, 4-1-1, Hiyoshi, Kohoku, Yokohama, 223-8526, Japan’. The correct affiliation is listed below:
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia.
Additional information
The online version of the original article can be found at 10.1038/srep27380
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Pai, Y., Yap, H., Md Dawal, S. et al. Erratum: Virtual Planning, Control, and Machining for a Modular-Based Automated Factory Operation in an Augmented Reality Environment. Sci Rep 6, 31678 (2016). https://doi.org/10.1038/srep31678
Published:
DOI: https://doi.org/10.1038/srep31678
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.