Demonstration of reconfigurable joint orbital angular momentum mode and space switching

Liu, Jun; Wang, Jian

doi:10.1038/srep37331

Download PDF

Open Access
Published: 21 November 2016

Demonstration of reconfigurable joint orbital angular momentum mode and space switching

Jun Liu¹ &
Jian Wang¹

Scientific Reports volume 6, Article number: 37331 (2016) Cite this article

1269 Accesses
12 Citations
Metrics details

Subjects

Abstract

We propose and demonstrate space-selective switch functions employing orbital angular momentum (OAM) modes in the space domain for switching network. One is the switching among different OAM modes having different spatial phase structures, called OAM mode switching. The other is the switching among different space locations, called space switching. The switching operation mechanism relies on linear optics. Reconfigurable 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching fabric using a single spatial light modulator (SLM) are all demonstrated in the experiment. In addition, the presented OAM-incorporated space-selective switch might be further extended to N × N joint OAM mode and space switching with fast response, scalability, cascading ability and compability to facilitate robust switching applications.

Introduction

Unfettered data switching occurs between individuals, businesses and the cloud at any moment over the world by utilizing pervasive information access available to us in various forms (smart phones, laptops, and wearable devices such as watches and glasses)¹. Optical networks are the interconnection fabric of the global internet, including undersea links across the oceans, terrestrial networks connecting continents, countries, and cities, and ending with points of business and home². However, the unabated exponential growth of global internet traffic is driving an ever-increasing demand for higher data capacity and more efficient spectral usage in transmission links. To sustain the exploding capacity demands, wavelength-division multiplexing (WDM) allowing multiple frequency-separated channels to co-transmit is adapted^3,4,5. In addition, using modulation formats that encode information over amplitude, phase, and polarization at each wavelength channel can further increase the capacity of optical transmission links^6,7,8,9. Modern optical networks are formed by nodes that transmit, receive and route data, which are interconnected by links. Mesh network nodes are linked to three or four neighbouring nodes with each link carrying two-way traffic typically. Transparent switching at each node of network links, or cross connect functionality, is required for realizing an all-optical network¹⁰. The wavelength-selective switch (WSS) fulfils all the mesh networking requirements above for the WDM system^11,12. Yet recently space-division multiplexing (SDM) exploiting the transverse spatial structure dimension of light beams has attracted more and more attention to meet the capacity requirements¹³. Few-mode fiber (FMF) and multi-core fiber (MCF) have gained great success in SDM for efficient increase of fiber optical transmission capacity^14,15,16,17. Analogical to WDM system, we need a space-selective switch working as a “WSS” in SDM system^18,19,20. Very recently, orbital angular momentum (OAM), which is also related to the spatial phase structure of an electromagnetic wave, has shown its possible applications both in free-space and fiber transmission links^{21,22,23,24,25,26,27,28,29}. Remarkably, similar to other mode bases in free space or fiber, OAM modes are another basis with which to represent spatial modes. We could use different mode bases for SDM, and so does OAM modes. An OAM beam features a spiral phase front of in which is the topological charge value and refers to the azimuthal angle. The distinct features are unlimited charge values of OAM and intrinsic orthogonality among different OAM states which facilitate an alternative multiplexing technique, i.e. OAM-division multiplexing. In this scenario, it would be valuable to develop OAM-incorporated space-selective switch when exploiting OAM modes in SDM related applications.

In this paper, we present two proof-of-concept space-selective switch functions employing OAM modes in the space domain for switching network. One is the switching among different OAM modes having different spatial phase structures, which is called OAM mode switching. The other is the switching among different space locations, which is called space switching. Moreover, we also report a reconfigurable joint OAM mode switch and space switch fabric using a single spatial light modulator (SLM). 4 × 4 OAM mode switching, space switching and joint OAM mode and space switching are all demonstrated in the experiment.

Results

Concept of OAM mode switching, space switching and joint OAM mode and space switching

Figure 1 illustrates the concept of OAM mode switching, space switching, and joint OAM mode and space switching. One can see four typical switching examples. Case 1: the same OAM mode (e.g. OAM₊₁) is delivered straightforward from input port 1 to the same output port 1, i.e. without OAM mode switching and without space switching. Case 2: one OAM mode (e.g. OAM₊₁) at input port 2 is switched to another OAM mode (e.g. OAM₊₃) at the same output port 2, i.e. with OAM mode switching and without space switching. Case 3: The same OAM mode (e.g. OAM₊₂) is switched from input port 3 to the different output port 4, i.e. without OAM mode switching and with space switching. Case 4: one OAM mode (e.g. OAM₊₄) at input port 4 is switched to another OAM mode (e.g. OAM₊₅) at the different output port 3, i.e. with OAM mode switching and with space switching (joint OAM mode and space switching). For simplicity we call Case 1 no switching, Case 2 OAM mode switching, Case 3 space switching, and Case 4 joint OAM mode and space switching.

Experimental setup of reconfigurable 4 × 4 OAM mode switching, space switching and joint OAM mode and space switching

The proof-of-concept experimental setup of reconfigurable 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching is illustrated in Fig. 2. Four lasers and four SLMs are employed to prepare four channels located at four different spatial positions having different OAM states. Each channel delivers a particular OAM mode to a specific location in the space domain. SLM1-SLM4 are employed to generate four different OAM modes which are then gathered by three non-polarizing beam splitters (BS1-BS3). The four light beams carrying different OAM modes propagate in parallel after the three BSs. The BS1 gathers light beams from SLM1 and SLM2 branches at the same height but separated horizontally. The BS2 gathers light beams from SLM3 and SLM4 branches at another height level while separated horizontally. The topological charge values of OAM modes generated from SLM1, SLM2, SLM3 and SLM4 branches are 1, 2, 3 and 4, respectively. SLM5 emulates the 4 × 4 switching node. The four input ports of the switching node are linked to the four OAM channels after BS3 and the four output ports are projected to a camera for monitoring. The inset of Fig. 2 depicts a typical intensity profile after BS3 with four different OAM modes located at four different spatial positions.

Reconfigurable 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching

Figure 3(a) shows the observed intensity profile after BS1 which is generated by SLM1 and SLM2, and the topological charge value is 1 and 2, respectively. Figure 3(b) shows the observed intensity profile after BS2 which is generated by SLM3 and SLM4 with = 3 and = 4. The horizontally separated light beams from SLM3 and SLM4 are at the same height level but different from those light beams from SLM1 and SLM2. The four light beams from SLM1-SLM4 are gathered together by BS3 to form a rectangular shape before linking to the switching node (SLM5), as shown in Fig. 3(c). The four spatial positions of four light beams from SLM1-SLM4 before SLM5 correspond to the four input ports 1 to 4 of the switching node. The four output ports of the switching node correspond to the four spatial positions of four light beams after the SLM5 which is captured by the camera. The switching function is achieved by SLM5 which is divided into four parts to independently steer the four light beams from four input ports and deliver them to four output ports. Figure 3(d–f) show measured interference patterns (i.e. interferograms) between a reference Gaussian beam and the OAM modes with a slight tilted angle at the input ports. Note that the number and direction of forks in the interferograms imply the magnitude and sign of the topological charge value. One can clearly see that the topological charge value of OAM mode at input port 1, port 2, port 3 and port 4 is 1, 2, 3 and 4, corresponding to SLM1 to SLM4 branches, respectively.

We first demonstrate the process of OAM mode switching. As illustrated in Fig. 4(a,e,i), port 2 is taken as an example to show OAM mode switching from = 2 to = 1, 3, 4. The phase patterns loaded to the SLM5 are shown in Fig. 4(b,f,j). The measured intensity profiles after OAM mode switching from = 2 to = 1, 3, 4 are shown in Fig. 4(c,g,k), respectively. Figure 4(d,h,l) depict the corresponding interference patterns of the OAM modes with a reference Gaussian beam after OAM mode switching. Remarkably, as the imaging process is upside down and laterally reversal, the location of phase pattern (bottom left) is reverse with respect to the intensity profile (top right). To clearly show the OAM mode switching function, one input port of four ports is chosen to perform the OAM mode switching.

We also demonstrate the OAM mode switching, in which OAM mode is switched to a new topological charge value, e.g. = 5, as illustrated in Fig. 5(a). The phase pattern loaded to the SLM5 is shown in Fig. 5(b). The measured intensity profile after OAM mode switching from = 4 to = 5 is shown in Fig. 5(c). Figure 5(d) depicts the interference patterns of the OAM mode with a reference Gaussian beam after OAM mode switching.

We then demonstrate the process of space switching. As illustrated in Fig. 6(a,e,i), port 1 is taken as an example to show space switching from input port 1 to output port 2, port 3 and port 4, respectively. The phase patterns loaded to the SLM5 are shown in Fig. 6(b,f,j). The insets of Fig. 6(b,f,j) depict enlarged phase patterns with more details. The intensity profiles after space switching are shown in Fig. 6(c,g,k), respectively. Figure 6(d,h,l) depict the corresponding interference patterns of the OAM modes with a reference Gaussian beam after space switching. The topological charge value of OAM mode at output port 2, port 3, and port 4 is 1, implying the realization of space switching without OAM mode switching.

We further demonstrate the process of joint OAM mode and space switching. As illustrated in Fig. 7(a,e,i), port 4 is taken as an example to show joint OAM mode and space switching from OAM₊₄ at input port 4 to OAM₊₁ at output port 1, OAM₊₂ at output port 2, and OAM₊₃ at output port 3, respectively. The phase patterns loaded to the SLM5 are shown in Fig. 7(b,f,j). The insets of Fig. 7(b,f,j) depict enlarged phase patterns with more details. The measured intensity profiles after joint OAM mode and space switching are shown in Fig. 7(c,g,k), respectively. Figure 7(d,h,l) depict the corresponding interference patterns of the OAM modes with a reference Gaussian beam after joint OAM mode and space switching. The topological charge value of OAM mode at output port 1, port 2 and port 3 is 1, 2, and 3, respectively, indicating the successful implementation of joint OAM mode and space switching.

For clear show of different kinds of switching operations, the obtained results in Figs 4, 5, 6, 7 apply to only one input port. To further verify the robust switch operations, reconfigurable 4 × 4 OAM mode switching, space switching and joint OAM mode and space switching are also demonstrated in the experiment. Figure 8(a) illustrates the process of 4 × 4 OAM mode switching. The phase pattern loaded to the SLM5 is shown in Fig. 8(b). The intensity profiles after 4 × 4 OAM mode switching are shown in Fig. 8(c). Figure 8(d–g) depict the interference patterns of the OAM modes with a reference Gaussian beam after 4 × 4 OAM mode switching. The topological charge value of OAM mode at output port 1, port 2, port 3 and port 4 is switched from 1 to 3, 2 to 1, 3 to 4 and 4 to 2, respectively.

Figure 9(a) illustrates the process of 4 × 4 space switching. The obtained results of 4 × 4 space switching are shown in Fig. 9(b–g). The phase pattern loaded to the SLM5 is shown in Fig. 9(b). The insets of Fig. 9(b) depict enlarged phase patterns with more details. The intensity profiles after 4 × 4 space switching are shown in Fig. 9(c). Figure 9(d–g) depict the interference patterns of the OAM modes with a reference Gaussian beam after 4 × 4 space switching. OAM modes = 1, 2, 3, 4 at input port 1, port 2, port 3 and port 4 are spatially switched to output port 4, port 1, port 2 and port 3, respectively.

Figure 10(a) illustrates the process of 4 × 4 joint OAM mode and space switching. The obtained results of 4 × 4 joint OAM mode and space switching are shown in Fig. 10(b–g). The phase pattern loaded to the SLM5 is shown in Fig. 10(b). The intensity profiles after joint OAM mode and space switching are shown in Fig. 10(c). Figure 10(d–g) depict the interference patterns of the OAM modes with a reference Gaussian beam after joint OAM mode and space switching. OAM modes = 1, 2, 3, 4 at input port 1, port 2, port 3 and port 4 are spatially switched to output port 4, port 1, port 2 and port 3 together with updated OAM modes = 4, 1, 2, 3, indicating successful implementation of 4 × 4 joint OAM mode and space switching.

Discussion

In summary, by exploiting linear optics operation mechanism, we propose and demonstrate several kinds of OAM-incorporated space-selective switch functions, i.e. OAM mode switching, space switching, and joint OAM mode and space switching. We experimentally demonstrate reconfigurable 4 × 4 OAM mode switching, space switching and joint OAM mode and space switching using a single SLM. With future improvement to 4 × 4 switching, N × N joint OAM mode and space switching with fast response, scalability, cascading ability and compatibility might be achieved to facilitate robust N × N space-selective switch function.

Response time

It is noted that the switching time of SLM based on nematic liquid crystal on silicon could be a bottleneck for fast-switch of OAM channels. To alleviate this problem, several possible solutions could be considered: (1) exploring transient nematic effects and phase wrapping techniques³⁰; (2) employing ferroelectric liquid crystal SLM^31,32; (3) adapting digital micromirror device (DMD)³³; (4) using fast spatial light modulation optoelectronic devices³⁴.

Scalability

The obtained results shown in Figs 4, 5, 6, 7, 8, 9, 10 show successful realization of reconfigurable 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching using a single SLM. The operation mechanism relies on linear optics and different kinds of switching functions are demonstrated in the experiment. It is noted that the proposed space-selective switch is scalable. With further improvement, space-selective switch might be extended to N × N switching based on similar linear optics operation mechanism. Figure 11 illustrates the concept of N × N joint OAM mode and space switching fabric. By employing a single SLM divided into N × N array with each unit independently loaded with a specific pattern, for the N × N OAM array with different OAM modes at different spatial locations, N × N OAM mode switching, space switching, or joint OAM mode and space switching from input plane to output plane could be achieved. However, the limited chip plane area of SLMs could limit the port number of NxN OAM mode and space switching³⁵.

1
In the current experiment of 4 × 4 OAM mode and space switching, only part area of the SLM is utilized. Thus it is still possible to further extend the port number beyond 4 × 4 switching by fully utilizing the effective area of SLMs. The SLMs employed in the experiments are Holoeye PLUTO phase-only SLMs based on reflective liquid crystal on silicon (LCOS). These SLMs have a spatial resolution of 1920 × 1080 pixels, a small pixel pitch size of 8 μm, and an active area of 15.36 × 8.64 mm. The diameter of light beams is about 3 mm. Thus, the extended port number could be estimated to be ~10. Actually, the beam size can be reduced using lens pair to further increase the port number of OAM and space switching.
2
To increase the port number, on one hand, SLM with relatively larger chip plane area could be employed; on the other hand, multiple SLMs could be combined together but with relatively increased system complexity.
3
To improve the switch channel density, OAM modes with relatively lower-order topological charge values or even fractional topological charge values could be considered^36,37. Since lower-order OAM modes have relatively smaller beam sizes, it is possible to increase the switch channel density not only with small OAM mode spacing but also with small space distance.

Cascading ability

Remarkably, as shown in Fig. 1, the multiple light beams at the input ports propagate in parallel while become crossed with each other at the output ports after switching. This could cause some problems when collecting the multiple light beams after switching to other communication systems. Also, it could cause problems when cascading multiple switching unites. So the ideal case after switching would be to also have multiple light beams at the output ports propagate in parallel. As shown in Fig. 12, this might be achieved by adding an additional wavefront correction stage, which could be simple grating phase pattern. By employing the switching unit as shown in Fig. 12, it is expected to improve the N × N OAM mode switching, space switching, and joint OAM mode and space switching with potential cascading ability.

Compatibility

Additionally, it is desirable that the presented OAM mode and space switching could be also compatible with the existing single mode fiber (SMF) based optical network. In this scenario, one could combine inverted spiral phase pattern with the grating phase pattern in the wavefront correction state shown in Fig. 12. As a consequence, the OAM modes after mode and space switching could be back converted to Gaussian-like beams with bright spot at the beam center which can be easily coupled into SMF.

Methods

Figure 13(a) shows a typical spiral phase pattern to change the topological charge value of an OAM mode to achieve OAM mode switching function. A typical phase pattern to enable space switching is shown in Fig. 13(b). It could be a grating phase pattern with different direction and period to steer the OAM light beam to a different location in the space domain. The combination of the spiral phase pattern and grating phase is displayed in Fig. 13(c), which could be used to achieve the joint OAM mode and space switching. Figure 13(d) shows the phase pattern loaded to a single SLM to perform 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching. The pattern is divided into four parts and each part is loaded with a different pattern discussed above according to different switching functions. As a consequence, one can independently steer four input light beams for individual OAM mode switching, space switching or joint OAM mode and space switching. Moreover, reconfigurable 4 × 4 OAM mode switching, space switching, and joint OAM mode and space switching are also available simply by changing the pattern loaded to the single switching SLM (i.e. SLM5 in Fig. 2).

Additional Information

How to cite this article: Liu, J. and Wang, J. Demonstration of reconfigurable joint orbital angular momentum mode and space switching. Sci. Rep. 6, 37331; doi: 10.1038/srep37331 (2016).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

Marom, D. M. & Blau, M. Switching solutions for WDM-SDM optical networks. IEEE Commun. Mag. 53, 60–68 (2015).
Article Google Scholar
Arık, S. Ö., Ho, K.-P. & Kahn, J. M. Optical network scaling: roles of spectral and spatial aggregation. Opt. Express 22, 29868–29887 (2014).
Article ADS Google Scholar
Brackett, C. Dense wavelength division multiplexing networks: Principles and applications. IEEE J. Sel. Area Commun. 8, 948–964 (1990).
Article ADS Google Scholar
Gnauck, A. et al. Spectrally efficient long-haul WDM transmission using 224-Gb/s polarization-multiplexed 16-QAM. J. Lightwave Technol. 29, 373–377 (2011).
Article ADS Google Scholar
Zhou, X. et al. 64-Tb/s, 8 b/s/Hz, PDM-36QAM transmission over 320 km using both pre-and post-transmission digital signal processing. J. Lightwave Technol. 29, 571–577 (2011).
Article ADS Google Scholar
Winzer, P. J. Modulation and multiplexing in optical communication systems. IEEE LEOS Newsletter 23, 4–10 (2009).
Google Scholar
Zhou, X. & Yu, J. Multi-level, multi-dimensional coding for high-speed and high spectral-efficiency optical transmission. J. Lightwave Technol. 27, 3641–3653 (2009).
Article ADS Google Scholar
Moose, P. H. A technique for orthogonal frequency division multiplexing frequency offset correction. IEEE Trans. Commun. 42, 2908–2914 (1994).
Article Google Scholar
Koizumi, Y., Toyoda, K., Yoshida, M. & Nakazawa, M. 1024 QAM (60 Gbit/s) single-carrier coherent optical transmission over 150 km. Opt. Express 20, 12508–12514 (2012).
Article ADS Google Scholar
Marom, D. M. et al. Wavelength-selective 1× K switches using free-space optics and MEMS micromirrors: theory, design, and implementation. J. Lightwave Technol. 23, 1620 (2005).
Article ADS Google Scholar
Doerr, C. et al. Eight-wavelength add-drop filter with true reconfigurability, IEEE Photon. Technol. Lett. 15, 138–140 (2003).
Article Google Scholar
Baxter, G. et al. Highly programmable wavelength selective switch based on liquid crystal on silicon switching elements, in Optical Fiber Communication Conference, Anaheim, California, United States. Optical Society of America, OTuF2, March (2006).
Richardson, D., Fini, J. & Nelson, L. Space-division multiplexing in optical fibres. Nature Photon. 7, 354–362 (2013).
Article CAS ADS Google Scholar
Ryf, R. et al. Mode-division multiplexing over 96 km of few-mode fiber using coherent 6 6 MIMO processing. J. lightwave Technol. 30, 521–531 (2012).
Article ADS Google Scholar
Koshiba, M., Saitoh, K. & Kokubun, Y. Heterogeneous multi-core fibers: proposal and design principle. IEICE Electron. Express 6, 98–103 (2009).
Article Google Scholar
Sillard, P., Bigot-Astruc, M. & Molin, D. Few-mode fibers for mode-division-multiplexed systems. J. Lightwave Technol. 32, 2824–2829 (2014).
Article ADS Google Scholar
Sakaguchi, J. et al. Space division multiplexed transmission of 109-Tb/s data signals using homogeneous seven-core fiber. J. Lightwave Technol. 30, 658–665 (2012).
Article ADS Google Scholar
Wilkinson, T. D., Crossland, B., Collings, N., Zhang, F. & Fan, M. Reconfigurable free-space optical cores for storage area networks. IEEE Commun. Mag. 43, 93–99 (2005).
Article Google Scholar
Crossland, W. et al. Holographic optical switching: the” ROSES” demonstrator. J. Lightwave Technol. 18, 1845–1854 (2000).
Article ADS Google Scholar
Lynn, B. et al. Design and Preliminary Implementation of an N × N Diffractive All-Optical Fiber Optic Switch. J. Lightwave Technol. 31, 4016–4021 (2013).
Article ADS Google Scholar
Wang, J. et al. Terabit free-space data transmission employing orbital angular momentum multiplexing. Nature Photon. 6, 488–496 (2012).
Article CAS ADS Google Scholar
Liu, J. & Wang, J. Demonstration of polarization-insensitive spatial light modulation using a single polarization-sensitive spatial light modulator. Sci. Rep. 5, 9959 (2015).
Article ADS Google Scholar
Liu, J. & Wang, J. Polarization-insensitive PAM-4-carrying free-space orbital angular momentum (OAM) communications. Opt. Express 24, 4258–4269 (2016).
Article ADS Google Scholar
Bozinovic, N. et al. Terabit-scale orbital angular momentum mode division multiplexing in fibers. Science 340, 1545–1548 (2013).
Article CAS ADS Google Scholar
Li, S. & Wang, J. A compact trench-assisted multi-orbital-angular-momentum multi-ring fiber for ultrahigh-density space-division multiplexing (19 rings × 22 modes). Sci. Rep. 4, 3853 (2014).
Article ADS Google Scholar
Li, S. & Wang, J. Supermode fiber for orbital angular momentum (OAM) transmission. Opt. Express 23, 18736–18745 (2015).
Article CAS ADS Google Scholar
Wang, A., Zhu, L., Liu, J., Du, C., Mo, Q. & Wang, J. Demonstration of hybrid orbital angular momentum multiplexing and time-division multiplexing passive optical network. Opt. Express 23, 29457–29466 (2015).
Article ADS Google Scholar
Wang, A. et al. Characterization of LDPC-coded orbital angular momentum modes transmission and multiplexing over a 50-km fiber. Opt. Express 24, 11716–11726 (2016).
Article CAS ADS Google Scholar
Zhu, L., Liu, J., Mo, Q., Du, C. & Wang, J. Encoding/decoding using superpositions of spatial modes for image transfer in km-scale few-mode fiber. Opt. Express 24, 16934–16944 (2016).
Article ADS Google Scholar
Wu, S. T. & Wu, C. S. High‐speed liquid‐crystal modulators using transient nematic effect. J. Appl. Phys. 65, 527–532 (1989).
Article CAS ADS Google Scholar
Henderson, C. J., Leyva, D. G. & Wilkinson, T. D. Free space adaptive optical interconnect at 1.25 Gb/s, with beam steering using a ferroelectric liquid-crystal SLM. J. Lightwave Technol. 24, 1989–1997 (2006).
Article ADS Google Scholar
Dudley, D., Duncan, W. & Slaughter, J. Emerging digital micromirror device (DMD) applications. Proc. SPIE 4985, 14–25 (2003).
Article ADS Google Scholar
Hacker, M. et al. Micromirror SLM for femtosecond pulse shaping in the ultraviolet. Appl. Phys. B 76, 711–714 (2003).
Article CAS ADS Google Scholar
Kowarz, M. W., Brazas, J. C. & Phalen, J. G. Conformal Grating Electromechanical system (GEMS) for High-Speed Digital Light Modulation, IEEE. 15th Int. MEMS Conf. Digest, 568–573 (2002).
Gao, S. et al. OAM-labeled free-space optical flow routing, Opt. Express 24, 21642–21651 (2016).
Article ADS Google Scholar
Wang, J. et al. Experimental Demonstration of free-space optical communications using OFDM-QPSK/16QAM-carrying fractional orbital angular momentum (OAM) multiplexing, in Optical Fiber Communication Conference, (Optical Society of America), M2F. 5 (2015).
Gotte, J. B. et al. Light beams with fractional orbital angular momentum and their vortex structure. Opt. Express 16, 993–1006 (2008).
Article ADS Google Scholar

Download references

Acknowledgements

We acknowledge the supports of the National Basic Research Program of China (973 Program) under grant 2014CB340004, the National Natural Science Foundation of China (NSFC) under grants 11574001, 11274131 and 61222502, the National Program for Support of Top-notch Young Professionals, the Program for New Century Excellent Talents in University (NCET-11–0182), the open program from State Key Laboratory of Advanced Optical Communication Systems and Networks under grant 2016GZKF0JT007, and the open projects foundation of Yangtze Optical Fiber and Cable Joint Stock Limited Company (YOFC) under grant SKLD1504. The authors thank Shuhui Li and Long Zhu for helpful discussions.

Author information

Authors and Affiliations

Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, Hubei, China
Jun Liu & Jian Wang

Authors

Jun Liu
View author publications
You can also search for this author in PubMed Google Scholar
Jian Wang
View author publications
You can also search for this author in PubMed Google Scholar

Contributions

J.W. developed the concept. J.L. and J.W. conceived the experiments. J.L. carried out the experiments. J.L. and J.W. analyzed the experimental data. J.L. and J.W. contributed to writing and finalizing the paper. J.W. supervised the project.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Reprints and Permissions

About this article

Cite this article

Liu, J., Wang, J. Demonstration of reconfigurable joint orbital angular momentum mode and space switching. Sci Rep 6, 37331 (2016). https://doi.org/10.1038/srep37331

Download citation

Received: 26 May 2016
Accepted: 14 October 2016
Published: 21 November 2016
DOI: https://doi.org/10.1038/srep37331

This article is cited by

Multiplication and division of the orbital angular momentum of light with diffractive transformation optics
- Gianluca Ruffato
- Michele Massari
- Filippo Romanato
Light: Science & Applications (2019)
Twisted optical communications using orbital angular momentum
- Jian Wang
Science China Physics, Mechanics & Astronomy (2019)

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.