The apical delta is an intricate system within the root canal and incompletely debridement may affect the long-term prognosis of root canal therapy. The aim of the present study is to investigate the morphologic features of apical deltas in human teeth with micro-computed tomography (micro-CT) using a centreline-fitting algorithm. One hundred and thirty-six apical deltas were detected in 1400 teeth. Molars had more apical deltas (15.8%) than anterior teeth (6.3%). In maxillary molars, the mesiobuccal root had a significantly higher prevalence of apical delta than the palatal root or the distobuccal root. The median vertical distance of the apical delta was 1.87 mm with 13% more than 3 mm. The median diameter and length of the apical delta branches were 132.3 and 934.5 μm. Apical delta branches were not straight with cross-sectional shapes being non-circular. These morphological features of apical delta may complicate debridement of the infected root canal system.
The apical delta is an intricate system of spaces within the root canal that allows free passage of blood vessels and nerves from the periapical compartment to the pulp tissue1,2. Its morphological feature may be depicted as a root canal dividing into three or more ramifications near the root apex, with the main canal becoming indistinguishable3,4. The apical delta is different from the accessory canal in which the main pulp canal is still distinguishable. Clinically, the inflamed, sometimes infected tissue in the apical delta is associated with periradicular disease5,6,7,8,9,10,11. Biofilms that colonize the apical delta in advanced stages of apical periodontitis or in cases with longstanding necrosis may jeopardize the prognosis of root canal treatment6. Because the ramifications within the apical delta are difficult to clean with root canal instruments and irrigants, the presence of incompletely cleaned apical deltas may adversely affect the long-term prognosis of root canal therapy8,12.
The prevalence of apical deltas in human permanent teeth varies among tooth locations, populations and study methods. Apical deltas are mostly found in maxillary second premolars, mandibular lateral incisors, and mandibular second premolars13. Using a clearing technique, Vertucci reported that the prevalences of apical deltas in the mandibular central incisors, lateral incisors and canines were 5%, 6% and 8%, respectively in an American patient population14. Caliskan and colleagues, however, reported that the prevalences of apical deltas in those teeth were 9.8%, 23.5% and 7.8% in a Turkish patient cohort13. For the mesiobuccal root of maxillary first molars, Rwenyonyi and coworkers identified a 5% prevalence of apical deltas in a Uganda population15 while Bhuyan and coworkers reported a 25% prevalence in an Indian population16.
Studies on the morphology of apical delta are mostly conducted using the canine model. The typical apical delta of a dog is manifested as “sprinkler-rose” anatomy with numerous narrow channels radiating peripherally (Fig. 1). Almost 60% of the apical deltas in dogs have more than 10 branches and the foramina have a diameter ranging from 20 to 150 μm1. Ninety-seven percent of those apical deltas have vertical extensions that are less than 3 mm from the anatomical apices. Acquisition of such information is essential to simulate the apical delta accurately in fluid dynamics simulations of the root canal spaces, explore the efficacy of canal debridement technique, as well as in root-end resection procedures in surgical endodontics. However, information on the vertical extension and morphologic characteristics of apical deltas in humans are lacking.
The most commonly used method for examining apical deltas is based on tooth clearing. Nevertheless, the technique always results in specimen destruction and is difficult to be used accurately for acquisition of quantitative data. Recently, micro–computed tomography (micro-CT) has been used for observation and analysis of the root canal system because of its non-destructive nature and the capability to analyse specimens with high resolutions17,18,19,20. To date, micro-CT studies on the apical delta in human teeth were conducted using small sample sizes and are limited to reporting the prevalence in one or two tooth types3,4,15,21. Recently, Xu and coworkers examined the morphological features of accessory canals using a micro-CT technique that involves the use of a centreline-fitting algorithm22. Accordingly, the objective of the present study was to investigate the morphology of apical deltas in human teeth with a large sample size using micro-CT and the centreline algorithm.
Prevalence of apical deltas in different tooth types and root formation
A total of 136 apical deltas were detected from the 1,400 teeth examined by micro-CT. The prevalence of apical deltas in different tooth types is shown in Table 1. Apical deltas were commonly found in mandibular molars (16.5%) and maxillary molars (15%), with the least percentages identified in maxillary and mandibular anterior teeth. In maxillary molars with separated roots, apical deltas were mostly located in the mesiobuccal root (11.2%), seldom in the distobuccal root (1.7%) and minimally in the palatal root (1.1%). In mandibular molars with separated roots, the mesial root had a little higher prevalence of apical deltas (9.5%) than the distal root (5.6%), but no significant difference was found (p > 0.05). In maxillary premolars with separated roots, 4.8% of the buccal roots had an apical delta; no apical deltas were detected in the lingual root.
Vertical extension of the apical delta
The median vertical distance from the beginning of the first apical delta branch (ADB) to the apex was 1.87 mm (ranging from 0.62 to 5.08 mm). Two-percent (3/136) of the apical deltas had a vertical distance no more than 1 mm long, 56% (76/136) had deltas more than 1 mm but no more than 2 mm long, 29% (39/136) were more than 2 mm but no more than 3 mm long, and 13% (18/136) were more than 3 mm long. There was no significant difference in the vertical extension among different tooth types (p > 0.05).
Number and morphology of ADBs
Of the 136 apical deltas, 634 ADBs were detected (Table 1). Representative reconstructed images of the ADBs are illustrated in Fig. 2. The median number of ADBs per apical delta was 4 (data ranging from 3 to 18). Molars had less ADBs (n = 4) than anterior teeth (n = 5) and premolars (n = 5) (p < 0.05). No significant difference in the number of ADBs was found between anterior teeth and premolars (p > 0.05).
Measurements of apical delta branches in different tooth types are depicted in Fig. 3. The median diameter of the ADBs was 132.3 μm (range 50.3–660.4 μm). The diameter of ADB in mandibular molars (174.4 μm) was significantly larger than those in other tooth groups (p < 0.05). The median length of the ADBs was 934.5 μm (range 163.6–6909.1 μm). Significant difference was only found between maxillary premolars (769.9 μm) and maxillary molars (992.8 μm), and between maxillary premolars (769.9 μm) and mandibular anterior teeth (1092.4 μm) (p < 0.05).
The predominant cross-sectional shape of the ADBs was oval (median ellipticity: 0.70; R1:R2 = 1.4). Eighty-nine percent ADBs had ellipticity less than 0.84 (R1:R2 ≤ 1.5), 4% between 0.84 and 0.87 (1.5 < R1:R2 ≤ 2), and 6% larger than 0.87 (R1:R2 > 2). Significant difference was only detected between maxillary premolars (0.73) and mandibular molars (0.67) (p < 0.05).
The median tortuosity of the ADBs was 1.05 (range 1.00 to 1.41). Significant difference was only identified between mandibular premolars (1.06) and mandibular molars (1.04) (p < 0.05). When the tortuosity is 1, the ADB is perfectly straight. A higher tortuosity indicates more curvature in the ADB.
In the present study, 1400 teeth (100 teeth per tooth type) from a native Chinese population were used to investigate the prevalence and morphology of the apical delta using a micro-CT technique. A total of 136 apical deltas were detected and the prevalence of the apical delta was 9.7% (6.3%, 8.8% and 15.8% in anterior, premolars and molars, respectively). Molars had a higher prevalence of apical deltas, which was similar to the study by Vertucci23 but the prevalences were lower than the 26% reported by Caliskan et al. from maxillary second premolars of a Turkish population13. The difference may reflect variations in population characteristics and study methods.
In maxillary molars with separated roots, the prevalence in the mesiobuccal root was much higher than those in palatal root and distobuccal root. This finding may be clinically related to more root canal treatment failures in the mesiobuccal root as a result of insufficient debridement of the apical delta. Arnold et al.8 reported a case of persistent apical periodontitis in the mesiobuccal root of a maxillary molar after single-visit root canal treatment. After apical surgery, histological sections of the mesiobuccal root tip revealed the presence of an apical delta. The biofilm in each ramification was clearly demarcated from the inflammatory reaction. For such a scenario, the application of an in-between appointment medication may enable diffusion of the antimicrobial components of the medicament to the biofilms that reside in the most inaccessible areas of the root canal system8.
Despite the close relationship between the delta morphology and apical periodontitis, many root canals with vital pulp prior to root canal treatment have vital tissues inside the delta. These ramifications are unlikely to be thoroughly debrided by contemporary techniques and irrigants employed for chemomechanical debridement of the canal space6. From a biological perspective, maintaining the vitality of the tissues within the apical deltas is desirable because with forceful expression of materials such as root canal sealers into those ramifications would unnecessarily create a large wound in the case of root canal treatment of vital pulps such as in the case of teeth with irreversible pulpitis6,24.
Data acquired on the vertical extension of the apical delta suggests that resection of the apical 3 mm of a root may include the whole apical delta and residual microorganisms from 87% of roots with apical delta. The corollary to that information is that the other 13% of the apical deltas with longer vertical extensions will harbour exposed, biofilm-infected ramifications if only 3 mm of the root is resected. This, in turn, may result in failure of the apicoectomy procedure. Gilheany and coworkers found that dye leakage was present at the root end-restoration interface or on the bevelled surface of the retrograde fillings25. The exposed ramifications of the resected root end may become a potential route for microleakage of bacterial by-products after retrograde filling. Hence, meticulous examination under a surgical microscope with dyes on the resected root end and extending the resection length correspondingly are mandatory to avoid leaving behind open ramifications of the apical delta. It has been reported that the mechanical strength of the root would not be significantly affected even if up to 6 mm of a root end is resected in maxillary anterior teeth under normal periodontal conditions26.
The diameter of ADB may vary among apical deltas. The median diameter was 132.3 μm and only 24% ADBs had a diameter more than 180 μm. This implies that both periapical radiography and cone-beam computed tomography (CBCT) would not be able to identify the apical deltas accurately because of insufficient resolution5. From a clinical perspective, when the main canal becomes indiscernible suddenly in the apical third of the root canal system and a negotiation file fails to reach the apical foramen, clinicians must consider the possibility of the presence of an apical delta. In some cases, the apical delta may only be identified after obturation of the debrided canal space with a radiopaque root canal sealer.
The median ellipticity was 0.70 in the present study. This means that the ratio of the long to short diameter of the ADB was 1.4. The median tortuosity was 1.05, which means that the apical delta along its path was 5% longer than the straight line between the ends of the ADBs. These results indicate the ADBs are not straight and their cross-sectional shapes are not circular. Increases in ellipticity and tortuosity of the ADBs may complicate the chemical debridement. New apical delta models and disinfection techniques need to be investigated to enable cleaning of the apical delta more thoroughly.
Within the limits of the present study, apical deltas are commonly found in mandibular and maxillary molars, and minimally in maxillary and mandibular anterior teeth. The diameter, length, shape, and undulation of the ADBs vary among different tooth types, which may complicate or hinder thorough chemomechanical debridement of those apical branches.
Materials and Methods
Datasets and 3D Reconstruction
One thousand four hundred extracted permanent teeth with completely formed apices from a native Chinese population were randomly selected from the tooth and canal morphology database (School of Stomatology, Wuhan University, China) for micro-CT. One hundred teeth were selected for each tooth type except for the wisdom teeth. The protocol used for the present study was approved by the Ethics Committee of the School and Hospital of Stomatology, Wuhan University. Informed consent was obtained from all participants. This study was conducted in full accordance with the World Medical Association Declaration of Helsinki. The teeth were scanned with μCT 50 (Scanco Medical, Bassersdorf, Switzerland) with nominal isotropic resolution of 15 μm inside a 48-mm diameter scanning vial at 90 kVp, 88 mA, 8 W, 500-msec integration time, and 500 projections per 180°. A 3D model of each root canal system was rendered with VGStudio MAX 2.1 (Volume Graphics, Heidelberg, Germany). The teeth with apical delta were screened when the main canal was divided into three or more branches near the apex with the main canal not being discernible. The number of the apical deltas and their ramifications were recorded and the vertical extension from the beginning of the first ADB to the apex was measured27.
Segmentation and measurement of apical delta branch
Apical delta branches were segmented using the two-dimensional (2D) Otsu image segmentation method in the CTAn software (v.188.8.131.52+, SkyScan; Bruker micro-CT, Kontich, Belgium) following orientation. For each tooth, a 3D surface-rendered model of ADB was created and imported to the software Mimics (v18.0; Materialise, Leuven, Belgium). Branches completely obstructed with severe calcifications were excluded from the analysis. A centerline of the surface-rendered ADB model was developed automatically with the following parameters: smoothing factor 0.1, resolving resolution 15 μm, with the distance between control points set at 5 μm. The control point was manually edited carefully to the centre of the cross section. The diameter, length, ellipticity (E) and tortuosity index of the ADB were measured with the method employed by Xu et al.22. Only unobstructed ADBs were analyzed. The ellipticity was calculated as:
where R1 represented the largest radius and R2 the smallest radius.
The tortuosity (T) was calculated as the length along the ADB (L) divided by distance between the two endpoints of the centreline (C).
Chi-square test was used for analysis of the prevalence of the apical delta in different tooth types and roots, with statistical significance present at α = 0.05. Differences in the diameter, length, ellipticity, and tortuosity of ADBs among the different types of teeth were subjected to separate statistical analysis. Because the acquired data were not normally distributed, data for each parameter were analyzed using Kruskal-Wallis analysis of variance and Dunn’s multiple comparison procedures, with statistical significance preset at α = 0.05.
How to cite this article: Gao, X. et al. Micro-CT evaluation of apical delta morphologies in human teeth. Sci. Rep. 6, 36501; doi: 10.1038/srep36501 (2016).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The present study was supported by the National Natural Science Foundation of China (Grant No. 81271130, No. 81470732). The authors deny any conflicts of interest related to this work.
About this article
Micro-computed tomography characterization of tissue engineering scaffolds: effects of pixel size and rotation step
Journal of Materials Science: Materials in Medicine (2017)