Abstract
Many tasks in our modern life, such as planning an efficient travel, image processing and optimizing integrated circuit design, are modeled as complex combinatorial optimization problems with binary variables. Such problems can be mapped to finding a ground state of the Ising Hamiltonian, thus various physical systems have been studied to emulate and solve this Ising problem. Recently, networks of mutually injected optical oscillators, called coherent Ising machines, have been developed as promising solvers for the problem, benefiting from programmability, scalability and room temperature operation. Here, we report a 16-bit coherent Ising machine based on a network of time-division-multiplexed femtosecond degenerate optical parametric oscillators. The system experimentally gives more than 99.6% of success rates for one-dimensional Ising ring and nondeterministic polynomial-time (NP) hard instances. The experimental and numerical results indicate that gradual pumping of the network combined with multiple spectral and temporal modes of the femtosecond pulses can improve the computational performance of the Ising machine, offering a new path for tackling larger and more complex instances.
Similar content being viewed by others
Introduction
Many combinatorial optimization problems1 belong to the complexity classes, called NP-complete and NP-hard2, and it is believed that they require a computation time scaling exponentially or faster with the number of input variables (problem size). Each problem in the NP-complete class has reducibility from the others within a polynomial time, and hence the classification has broad applications. Thus, an efficient scheme to compute these problems has been extensively searched for.
One of the most popular problems in such classes is to search for a ground state of the Ising Hamiltonian3
Here, σi = +1, −1 is a normalized eigenvalue of a spin 1/2 particle and called Ising spin, and Jij is the sign and magnitude of magnetic interactions. This problem is important to understand mysterious properties of spin glasses and magnetic disorders. To this end, some quantum systems for simulating the Ising model have been developed4,5,6,7,8. However, the task of finding a ground state of three-dimensional Ising spin systems has been proven to be NP-hard, while its decision problem version is NP-complete9,10. Other NP-complete problems, such as the MAX-CUT problem, graph partitioning problem and some families of SAT problems can be reduced to the Ising problem11,12,13.
Meta-heuristic algorithms have been vastly studied to attack this intractable problem. Simulated annealing (SA)14 is one of the most prevalent and successful methods in practice. Quantum annealing (QA)15,16 has been proposed as a method which can potentially give better solutions than SA. The hardware to implement QA has also been recently developed17,18,19, and its true performance is under consideration20. Adiabatic quantum computation21,22 is closely related to QA and based on the adiabatic evolution of the Hamiltonians, for which some attempts23,24 are made to avoid the notorious transition13,25 from an initially prepared ground state to an excited state mainly due to the closing energy gap between them.
We have recently proposed novel computational systems for the Ising problem26,27,28,29,30,31, called coherent Ising machines, based on networks of optical oscillators with mutual injections. In the system, an Ising spin is represented by an optical degree of freedom in each oscillator mode such as polarization or phase. Mutual injections between the oscillators induce in-phase and out-of-phase interference which emulates the spin-spin interactions. Here, the Ising Hamiltonian is mapped onto the effective loss of the mutually coupled oscillator network. When a pumping energy is gradually increased to the system from below to above the oscillation threshold28, the gain of each oscillation mode rises gradually. Accordingly, only one mode with the minimum loss can oscillate first and the other modes are suppressed. Thermal noise is safely neglected in optical systems, thus a low-temperature artificial spin system will be realized in the machine. As SA and QA, coherent Ising machines are considered as ones of the approximation algorithms with finite and polynomially scaling resources, which do not always guarantee the exact solution. Their computational potentials, including the possibility of their performance improvement by quantum effects, have been being theoretically investigated32,33.
Degenerate optical parametric oscillators (DOPOs) with the identical pump phase reference30 are suitable for realization of binary artificial spins. A DOPO shows non-equilibrium phase transition in the distribution function for the anti-squeezed quadrature amplitude . In a DOPO pumped below the oscillation threshold (Fig. 1(a)), the fluctuation in is magnified, while that for the orthogonal component (squeezed amplitude ) is suppressed. When the pumping power gets above the threshold (Fig. 1(b)), the distribution P(x) is divided into the two parts that are completely out-of-phase. Here, the state synchronizing the pump is written as , and that with the opposite phase denoted by . The Ising machine assigns σi = +1 to {0}i and σi = −1 to {π}i in the i-th DOPO. A time-division multiplexed DOPO network contains a temporal sequence of signal pulses in a single ring resonator and the mutual coupling is introduced by their interference (Fig. 1(c)). The number of optical pulses hence can scale with the length of ring cavity and the repetition rate of the pump pulses. An experimental demonstration31 of a 4-pulse system has shown error-free computation on a frustrated 4-spin (N = 4 MAX-CUT-3) problem in 1000 trials. Here, a numerical simulation based on step-function (abrupt) pumping did not reproduce the performance which the experiment showed. It was indicated that gradually introduced pumping could explain the experiment, but further theoretical and experimental evidences with larger and more complex problems were desired for the confirmation. Another difference to the previous simulation is that the implemented system is based on ultrashort pulses with a massive number of frequency modes. A theoretical model and experimental data have been needed to investigate possible multi-mode effects on the machine performance.
In this letter, we show another experimental demonstration of a coherent Ising machine using sixteen telecom-band DOPO pulses resonating in a single ring cavity and pulse-to-pulse phase-controlled interference via three optical delay lines. We have constructed a new system including a pump laser with a higher pulse repetition rate, more stable cavity locking equipment and measurement apparatus with broader bandwidths. An instance of NP-hard MAX-CUT problem on a cubic graph (3-regular graph) is realized, and it has many metastable suboptimal solutions (local minima) which are not included in the previous experiment. In addition, one-dimensional ferromagnetic and anti-ferromagnetic Ising ring problems are programmed for benchmarking. A slow pumping schedule is successfully implemented, and the dynamics of the signal pulses is measured in a long time scale with a high-speed detector. Computation with negligible error rates for 1000 or more successive trials is achieved. We also compare the experiment with numerical simulations of abruptly pumped single-mode DOPOs, gradually pumped single-mode DOPOs and abruptly pumped multi-mode DOPOs based on temporal Hermite-Gauss pulses. It shows that the gradual pumping and multi-mode dynamics support the high performance in the experiment. Fine signal dynamics in the experimental data suggests that enhanced state-to-state tunneling due to the multi-mode operation protects the system from fluctuation coming from experimental defectiveness.
Result
Experimental setup
The experimental system is based on phase-locked femtosecond DOPOs34,35 running in a single ring cavity (Fig. 2(a)). The pump laser (Laser Quantum, Taccor 10s) is a mode-locked titanium-sapphire laser emitting pulses with a temporal duration of 14 fs, a central wavelength of 794 nm and a repetition frequency of 1 GHz. A mechanical chopper (CP) is placed in the cavity and periodically blocks the pump beam, enabling independent sessions of computation. The pump laser beam has a spot size of about 1 mm at its output port, thus the chopper gives a finite rise time for the average pump power, depending on the shape of the blade and the switching frequency. It achieves slow increase in the signal quality factor and the pumping power. Both of them gradually raise the net gain and help the system to reach a lowest-loss state. The round-trip time of the ring cavity composed of four mirrors (M1–M4) is 16 ns, and the pump repetition period is 1 ns, resulting in sixteen independent signal pulses per round trip. The dielectric mirror M1 transmits more than 90% of the pump power while reflects 99.8% of the signal. The mirrors M3 and M4 are gold-coated concave mirrors with a radius of curvature of 50 mm. These two mirrors focus the pump and signal beams in the nonlinear crystal and achieve a large parametric gain. The nonlinear crystal is a 1-mm long MgO-doped periodically poled lithium niobate (PPLN) with a poling period of 20.4 μm and put at the Brewster angle, providing degenerate type 0 (e + e → e) quasi phase matching (parametric gain). All the input and output couplers (ICs and OCs) are 1 mm-thick plate beamsplitters with AR coating on one side and 10% reflective coating on the other side. PD1 is a slow detector for monitoring the average signal power and is also used for cavity stabilization. The main servo controlling system (Controller 1, TEM Messtechnik, LaseLock Digital) places a PID feedback, using a top-of-fringe locking scheme36, stabilizing the cavity length via the piezoelectric transducer (PZT). The mechanical chopper (CP) enables automated and independent computation runs. However, the resulting abrupt changes in the PD output induce some instability in the cavity locking by Controller 1. We thus use another servo controlling circuit with a very low bandwidth (Controller 2). Here, we put another small and relatively fast modulation of 20 kHz on the fast PZT channel of the pump laser, and the circuit gives the proportional feedback with the fast error signal to the slow PZT channel. The whole system is surrounded by a cardboard enclosure to avoid the fluctuation due to airflow and sound. See also Methods and Supplementary Information.
Couplings between the DOPO pulses are implemented by the three pairs of OCs and ICs in the cavity (Fig. 2(b)). Each of them has a reflection of R ~ 10% in power for DOPO pulses. It means that each pair of OCs and ICs provides ~10% of nominal field couplings between the pulses, while the additional loss in the system degrades the ratio. The effective coupling estimated with the change in the oscillation threshold by opening delay 1 is 7.5%. Delay 1 lags the pulses by 1 ns and gives the couplings from the n-th to (n + 1)-th OPO, i.e. Jn n+1. Likewise, delay 2 (15 ns) and delay 3 (8 ns) provide the couplings Jn+1n and Jn n+8 = Jn+8n, respectively. The sign of the coupling Jij is controlled by the PZT stage that tunes the optical path length of each delay line. The oscillation threshold of the system with two output couplers for PD1 and the readout interferometer is 113 mW, and the threshold including the three delay lines is 334 mW. The unequal-arm interferometer is used for the measurement of the relative phases between adjacent signal pulses via both slow and fast detectors. High-level and low-level pulses at the fast detector suggest σi+1 = +σi and σi+1 = −σi, respectively, thus the output pulse pattern allows us to measure the artificial spin configuration. The servo controllers of the same model as Controller 1 also lock the interferometer and delay lines using the interference of the pump pulses, although they are omitted from the figure for simplicity. Here, blocking of the pump beam and hence the electrical feedback by the chopper interrupts the stable couplings. We thus use a narrow chopping blade to reduce the off-pumping time as much as possible. As the previous work31,37, we have obtained the data showing that each pulse randomly takes either of binary phases, 0 or π, when the pulses are decoupled. Also, we have assured that introducing a single delay line (delay 1) and modulating its coupling phase can switch between the same-phase state σiσi+1 = +1 and alternating-phase state σiσi+1 = −1 (See Supplementary information).
Performance of the system
Table 1 summarizes the performance of the 16-pulse coherent Ising machine for ferromagnetic and antiferromagnetic Ising rings, and a cubic graph where each node is connected with three other ones. The two one-dimensional ring instances involve only delay 1 and 2, with delay 3 blocked. Opening all the three delay lines gives the couplings aligned in the cubic graph called Möbius ladder. The anti-ferromagnetic couplings on such cubic graphs represent NP-hard instances, equivalent to the MAX-CUT-3 problem. Figure 3 depicts the fast-detector output signals corresponding to one of the ground states of the target instances illustrated below the graphs. Both instances of ferromagnetic and anti-ferromagnetic rings have only two degenerate ground states, which are pairs of totally opposite phase state configurations with the same-phase (Fig. 3(a)) and alternating-phase orders (Fig. 3(b)), respectively. While these instances do not have any local minima, they include a series of first excited states with the two-domain structures, where moving the domain wall does not change the cost function. The sixteen ground states of the MAX-CUT-3 problem in the cubic graph with homogeneous anti-ferromagnetic couplings have two domains of eight anti-phased pulses and two frustrated parts at the domain boundaries, corresponding to the high-level pulses in Fig. 3(c). 34 local minima correspond to the states strongly reflecting the couplings of either the ring or the diagonals. The eight pulse patterns that are cyclic permutations of Fig. 3(c) also correspond to the ground states, although we do not distinguish them because of the absence of a time reference in our measurements.
We continuously measure and record the output pulse pattern for each instance to estimate the probability of finding a ground state. We use a single narrow blade for the chopper with a frequency of 20 Hz. The rise time (10–90% of the maximum) of the pump power is 206 μs corresponding to ~12,800 round trips for the 4.8 m ring cavity. For the ferromagnetic and anti-ferromagnetic 1D ring, we have got 100% and 99.6% success rates out of 1,000 runs. For the anti-ferromagnetic cubic graph, the success rate was 100% in 2,000 trials. The small error rate for the anti-ferromagnetic 1D ring case could be due to the experimental incompleteness such as the beam alignment and mechanical stability of the system.
To examine the impact of the gradual pumping and multimode effect, we simulated the system using three theoretical models. The first model is based on the abruptly pumped single-mode DOPO network with discrete gain and coupling processes38,39. It performs stepwise introduction of a constant pumping power of 2.7 times the oscillation threshold (Ith), which is comparable with the experiment, to the system in the vacuum state. The second model incorporates a linearly scheduled pumping to the first model. The pump rate is increased from Ith to 2.7 Ith with 10000 round trips, so that its slope is comparable with that in the experiment. As in the laser case28, it is expected that a slower schedule leads to a higher success probability at the expense of a longer computation time. The third model (described in Supplementary Information) deals with multimode DOPOs40 with an abrupt pumping of 1.1 Ith. Here, five temporal Hermite-Gauss modes are assumed for each pulse. The coupling ratios are all the same as the experimental value (7.5%). The simulation result is shown in Table 1. Although all the models solve the cubic graph problem, the first model with 10000 round trips gives success rates of only about 60% in the 1-D Ising ring problems. We have assured that 300 round trips make these rates converge, thus their further improvement with more round trips cannot be expected. It means that the system of abruptly pumped single-mode DOPOs is likely to be trapped in local minima and not consistent with the experimental result. Meanwhile, the success probabilities by the second model converge at unity, 2000 round trips after crossing the oscillation threshold of the individual DOPO. Also, the multimode tunneling accelerates the search for a ground state. Only 200 times the cavity lifetime, corresponding to about 240 round trips are enough for the third model to achieve error-free computation of the problems considered. The experimental performance supports the enhancement of the success rates due to these effects. In terms of the stability of the current locking scheme, it is difficult to change the pumping schedule and hence identify which effect is dominant. Finer controllability of the system is a challenge for the future.
Long-term pulse measurement
The detailed dynamical behavior of the OPO network is studied. Measured data indicates how the tunneling and gradual pumping contribute to the computing process of the machine. Figure 4 presents an example of the signal mode interferometer outputs in the presence of a chopper, for the cubic graph problem. A metallic chopping fan with multiple blades is used, and the pump rise up time is 672 μs. The gradual turnover is firstly demonstrated by the signal envelope which increases linearly in time from t ≈ 70 μs, corresponding to the effective oscillation threshold of the DOPO network (Fig. 4(a)). The oscillatory behaviour is seen until t ≈ 115 μs, and it gradually slows down towards the stable final state. A zoomed plot (Fig. 4(b)) shows that the system finds a ground state at an early peak in the oscillation. However, the state significantly changes at a certain point, and the envelope of the output power decreases afterwards (Fig. 4(c)). It means that the system lets go of the ground state by the fluctuation which would come from the excess noise of the pump laser. Although, the excited state which the system reaches has a larger loss, and the gain is limited by the gradual pumping. As a result, the system can damp the signal pulses and oscillate a ground state again (Fig. 4(d)). Every peak of the output for t > 80 μs, with an interval between 100 and 200 round trips, includes the pattern for ground states. This is not consistent with the slow convergence of the success probability by the simulation of the gradually pumped single-mode DOPO network, and suggests the accelerated computation by the multimode effect. As the signal gain increases in time, the relative magnitude of the fluctuation falls. This leads to the slowing of the oscillation in the output envelope. When the pulses have enough amplitude, the switching between different configurations gets impossible and the system stably holds the ground state (Fig. 4(e)).
Discussion
Here, we discuss the experimental defectiveness. Errors mostly come from the misalignment of the beams for the couplings. Here, we have to correctly overlap the signal beams not only spatially but also temporally. Pulses have fine structures of optical cycles, thus the interfered pump power output from the IC of each delay line can have many extremal points, at which the electric feedback locks the system. However, the duration of the pump pulses in our system corresponds to just 7.6 cycles, thus it is relatively easy to obtain the best condition by searching for the maximum average cavity signal power, inversely proportional to the photonic loss.
We also refer to the erroneous states which appear when the system is not optimally tuned, in terms of the temporal locking point (see also Supplementary Information). In the 1-D ring problems, they are prone to be a series of first excited states containing two magnetic domains. In the cubic graph case slightly off the best condition, we have observed two local minima out of 1000 runs. The effect of the experimental incompleteness tends to be along with general errors in approximate optimization algorithms. In larger systems, it will be more important to distinguish the fundamental errors of the machine from the imperfection of the experimental condition.
Conclusion
In conclusion, we have presented an experimental demonstration of a 16-pulse coherent Ising machine. The precisely controlled system avoids excited states and finds ground states of one-dimensional ring and cubic graph instances with sufficiently small error rates, supporting the advantage of the gradual pumping and multi-mode operation. The dynamics of the interference signal reveals multiple destruction and construction of ground states under the experimental fluctuation and limited gain. Multimode tunneling is indicated in terms of the fast search for ground states. Combination of building a ring oscillator in a fiber cavity and implementing effective pulse-to-pulse couplings with a measurement-feedback technique38 is expected as a practical way to improve the programmability and scalability of the machine. Another important direction is to examine if possible quantum effects32 in the system improve the probability to find a ground state. Our simulation work here is based on semiclassical models, thus estimation of the quantum speedup is beyond the scope of this paper. However, very recent theoretical work33 indicates that our 16-bit Ising machine might contain quantum correlation which restricts undesired excited states, even under some loss in the cavity. Experimental confirmation of such quantum effects is left for future study.
Methods
Operation of optical parametric oscillator
The feedback control of the cavity length enables the continuous operation. The cavity length corresponding to the degenerate operation results in the highest slope efficiency and a single-peak output spectrum. The signal pulses at degeneracy have a central wavelength of 1574 nm, a 3-dB spectral width of 80 nm, pulse duration of 80 fs and a pulse repetition rate of 1.0096 GHz. See also Supplementary Information.
Numerical simulation
In the numerical simulation, we adopt the single-mode and multi-mode theory and assign a c-number field variable for each mode. The single-mode model is based on ref. 40. Numerical integration is based on the fourth-order Runge-Kutta method. Discrete steps such as parametric amplification, out-coupling and input-coupling including vacuum fluctuation are sequentially applied according to the experimental setup. The phase states of the fields are read out after 10,000 round trips for a single run. 1,000 trials are used for estimation of the success probability. The multi-mode theory exploits five Hermite-Gauss modes for a single pulse. 200 times the cavity lifetime (about 240 round trips) were enough to find a ground state for 1,000 runs. Details are presented in Supplementary Information.
MAX-CUT problem
MAX-CUT problem is a kind of bipartition problems for a graph G = {V, E} composed of a set of vertices V and that of edges E connecting two vertices. A partition of V into two disjoint subsets V1 and V2 is called a cut. A cut size is the number of edges between vertices of different subsets of a cut (V1 and V2). Here, MAX-CUT problem is defined as finding the maximum cut size for a given graph and belongs to the NP-hard class.
Additional Information
How to cite this article: Takata, K. et al. A 16-bit Coherent Ising Machine for One-Dimensional Ring and Cubic Graph Problems. Sci. Rep. 6, 34089; doi: 10.1038/srep34089 (2016).
References
Korte, B. & Vygen, J. Combinatorial Optimization (Springer-Verlag, 2012).
Garey, M. R. & Johnson, D. S. Computers and Intractability: A Guide to the Theory of NP-Completeness (W. H. Freeman, 1979).
Ising, E. Beitrag zur theorie des ferromagnetismus. Z. Phys. 31, 253–258 (1925).
Friedenauer, A. et al. Simulating a quantum magnet with trapped ions. Nat. Phys. 4, 757–761 (2008).
Kim, K. et al. Quantum simulation of frustrated Ising spins with trapped ions. Nature 465, 590–593 (2010).
Simon, J. et al. Quantum simulation of antiferromagnetic spin chains in an optical lattice. Nature 472, 307–312 (2011).
Islam, R. et al. Onset of a quantum phase transition with a trapped ion quantum simulator. Nat. Commun. 2, 377, 10.1038/ncomms1374 (2011).
Zhang, J. et al. Digital quantum simulation of the statistical mechanics of a frustrated magnet. Nat. Commun. 3, 880, 10.1038/ncomms1860 (2012).
Barahona, F. On the computational complexity of Ising spin glass models. J. Phys. A: Math. Gen. 15, 3241–3253 (1982).
Barahona, F., Grötschel, M., Jünger, M. & Reinelt, G. An application of combinatorial optimization to statistical physics and circuit layout design. Operations Research 36, 493–513 (1988).
Jerrum, M. & Sinclair, A. Polynomial-time approximation algorithms for the Ising model. SIAM J. Comput. 22, 1087–1116 (1993).
Mézard, M., Parisi, G. & Virasoro, M. A. Spin Glass Theory and Beyond (World Scientific, Singapore, 1987).
Young, A. P., Knysh, S. & Smelyanskiy, V. N. First-order phase transition in the quantum adiabatic algorithm. Phys. Rev. Lett. 104, 020502 (2010).
Kirkpatrick, S., Gelatt Jr., C. D. & Vecchi, M. P. Optimization by simulated annealing. Science, 220, 671–680 (1983).
Kadowaki, T. & Nishimori, H. Quantum annealing in the transverse Ising model. Phys. Rev. E 58, 5355–5363 (1998).
Das, A. & Chakrabarti, B. K. Colloquium: Quantum annealing and analog quantum computation. Rev. Mod. Phys. 80, 1061–1081 (2008).
Johnson, M. W. et al. Quantum annealing with manufactured spins. Nature 473, 194–198 (2011).
Boixo, S. et al. Experimental signature of programmable quantum annealing. Nat. Commun. 4, 2067, 10.1038/ncomms3067 (2013).
Boixo, S. et al. Evidence for quantum annealing with more than one hundred qubits. Nat. Phys. 10, 218–224 (2014).
Rønnow, T. F. et al. Defining and detecting quantum speedup. Science 345, 420–424 (2014).
Farhi, E., Goldstone, J., Gutmann, S. & Sipser, M. Quantum computation by adiabatic evolution. arXiv:quant-ph/0001106v1 (2000).
Farhi, E. et al. A quantum adiabatic evolution algorithm applied to random instances of an NP-complete problem. Science 292, 472–475 (2001).
Choi, V. Avoid first order quantum phase transition by changing problem hamiltonians. arXiv:quant-ph/1004.2226 (2011).
Seki, Y. & Nishimori, H. Quantum annealing with antiferromagnetic fluctuations. Phys. Rev. E 85, 051112 (2012).
Amin, M. H. S. & Choi, V. First-order quantum phase transition in adiabatic quantum computation. Phys. Rev. A 80, 062326 (2009).
Utsunomiya, S., Takata, K. & Yamamoto, Y. Mapping of Ising models onto injection-locked laser systems. Opt. Exp. 19, 18091–18108 (2011).
Takata, K., Utsunomiya, S. & Yamamoto, Y. Transient time of an Ising machine based on injection-locked laser network. New J. Phys. 14, 013052 (2012).
Takata, K. & Yamamoto, Y. Data search by a coherent Ising machine based on an injection-locked laser network with gradual pumping or coupling. Phys. Rev. A 89, 032319 (2014).
Utsunomiya, S., Namekata, N., Takata, K., Akamatsu, D., Inoue, S. & Yamamoto, Y., Binary phase oscillation of two mutually coupled semiconductor lasers. Opt. Exp. 23, 6029–6040 (2015).
Wang, Z. et al. Coherent Ising machine based on degenerate optical parametric oscillators. Phys. Rev. A 88, 063853 (2013).
Marandi, A. et al. Network of time-multiplexed optical parametric oscillators as a coherent Ising machine. Nat. Photon. 8, 937–942 (2014).
Takata, K., Marandi, A. & Yamamoto, Y. Quantum correlation in degenerate optical parametric oscillators with mutual injections. Phys. Rev. A 92, 043821 (2015).
Maruo, D., Utsunomiya, S. & Yamamoto, Y. Truncated Wigner function theory of coherent Ising machines based on degenerate optical parametric oscillator network. Phys. Scr. 91, 083010 (2016).
Marandi, A., Leindecker, N. C., Pervak, V., Byer, R. L. & Vodopyanov, K. L. Coherence properties of a broadband femtosecond mid-IR optical parametric oscillator operating at degeneracy. Opt. Exp. 20, 7255–7262 (2012).
Vainio, M., Merimaa, M., Halonen, L. & Vodopyanov, K. Degenerate 1 GHz repetition rate femtosecond optical parametric oscillator. Opt. Lett. 37, 4561–4563 (2012).
Black, E. D. An introduction to Pound-Drever-Hall laser frequency stabilization. Am. J. Phys. 69, 79–87 (2001).
Marandi, A., Leindecker, N. C., Vodopyanov, K. L. & Byer, R. L. All-optical quantum random bit generation from intrinsically binary phase of parametric oscillators. Opt. Exp. 20, 19322–19330 (2012).
Haribara, Y., Utsunomiya, S. & Yamamoto, Y. Computational Principle and Performance Evaluation of Coherent Ising Machine Based on Degenerate Optical Parametric Oscillator Network. Entropy 18, 151, 10.3390/e18040151 (2016).
Hamerly, R., Inaba, K., Inagaki, T., Takesue, H., Yamamoto, Y. & Mabuchi, H. Topological defect formation in 1D and 2D spin chains realized by network of optical parametric oscillators. Int. J. Mod. Phys. B, doi: http://dx.doi.org/10.1142/S0217979216300140 (2016).
Patera, G., Treps, N., Fabre, C. & De Valcarcel, G. J. Quantum theory of synchronously pumped type i optical parametric oscillators: characterization of the squeezed supermodes. Eur. Phys. J. D 56, 123–140 (2010).
Acknowledgements
We thank K. Aihara, K. Kikuchi M. Ohtsu and K. Taura for fruitful discussion and T. Horikiri for experimental support. This work is supported by JST through its ImPACT program. K.T. thanks for Grant-in-Aid for JSPS Fellows.
Author information
Authors and Affiliations
Contributions
K.T., A.M., S.U. and Y.Y. organized the project. K.T. and A.M. designed and carried out the experiment. R.H. developed the theoretical model. R.H. and Y.H. performed numerical simulation. K.T. wrote the manuscript. Y.H. supported the Supplementary Materials. D.M., S.T., H.S. and S.U. supported the experiment. S.T. supported the theoretical analysis. All of them commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Takata, K., Marandi, A., Hamerly, R. et al. A 16-bit Coherent Ising Machine for One-Dimensional Ring and Cubic Graph Problems. Sci Rep 6, 34089 (2016). https://doi.org/10.1038/srep34089
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep34089
This article is cited by
-
Bifurcation behaviors shape how continuous physical dynamics solves discrete Ising optimization
Nature Communications (2023)
-
Recent progress on coherent computation based on quantum squeezing
AAPPS Bulletin (2023)
-
Control of amplitude homogeneity in coherent Ising machines with artificial Zeeman terms
Communications Physics (2022)
-
An Ising machine based on networks of subharmonic electrical resonators
Communications Physics (2022)
-
Computational complexity continuum within Ising formulation of NP problems
Communications Physics (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.