Abstract
Efficient coupling of intense laser pulses to solid-density matter is critical to many applications including ion acceleration for cancer therapy. At relativistic intensities, the focus has been mainly on investigating various laser beams irradiating initially overdense flat interfaces with little or no control over the interaction. Here, we propose a novel approach that leverages recent advancements in 3D direct laser writing (DLW) of materials and high contrast lasers to manipulate the laser-matter interactions on the micro-scales. We demonstrate, via simulations, that usable intensities ≥1023 Wcm−2 could be achieved with current tabletop lasers coupled to micro-engineered plasma lenses. We show that these plasma optical elements act as a lens to focus laser light. These results open new paths to engineering light-matter interactions at ultra-relativistic intensities.
Similar content being viewed by others
Introduction
The manipulation of laser light has led to many spectacular advances in medicine, telecommunication1, remote sensing2 and in probing the fundamental interaction of light with matter at the atomic scales3. Controlling and manipulating laser light at relatively low intensities has been widely studied using photonic crystals4, heterostructures5 and metamaterials6. As the laser intensity has increased beyond the damage threshold, these optical approaches are less effective as the laser pulse efficiently ionizes the materials. Further intensity increase moves the interaction into the relativistic regime7 (>1018 Wcm−2), where many exotic phenomena have been predicted and experimentally observed in laser-matter interactions. These include the production of relativistic electrons8,9,10,11,12,13,14,15,16,17, the acceleration of protons and heavy ions18,19,20,21,22,23,24,25, the synthesis of attosecond pulses from plasma-induced harmonics26,27,28,29,30 and the creation of electron-positron jets31. The investigation of these processes has been focused on exploring their dependence on various laser pulses as well as target parameters (spatial dimensions, density and atomic number). More recently, front surface target morphology is being introduced to enhance laser matter interactions. Structured interfaces including sub-wavelength structures, snowflakes, nanowires and cone targets are used to enhance laser absorption32,33,34,35,36,37,38,39,40, to guide the electrons/protons41,42,43, or to serve as plasma undulators44.
Despite recent progress, controlling light-matter interactions at relativistic intensities has not been extensively explored for two main reasons. First, the manufacturing of advanced micro- and nano-structures has been the domain of other scientific disciplines and their use is confined to intensities below the damage threshold. Second, high-intensity short-pulses are inherently preceded by nanosecond scale pedestals45 that can destroy or substantially modify any guiding structure due to hydrodynamic expansion. However, with recent advancement in laser technology and laser pulse cleaning techniques it is now possible to substantially reduce the undesired pedestals. Laser to pedestal contrast ratios higher than 1010 have been achieved using cross-polarized wave generation (XPW) technique46. Higher contrast can also be achieved by using the plasma mirror method47,48,49. Furthermore, highly repeatable structures with features as small as 100 nm can be easily manufactured using 3D direct laser-writing (DLW)50. The small size of the light guiding features and the short duration of the current generation of high contrast laser (tens of femtoseconds) make it possible to optimize the interaction using realistic and computationally manageable particle-in-cell (PIC) simulations.
We show via PIC simulations that, one of the most critical parameters-the laser intensity, can be manipulated using hollow micro-cylinders. The structured target exhibits optical resonance. When a high contrast intense laser pulse is input into the Micro-Tube-Plasma (MTP) lens, it is significantly intensified. The new technique is able to boost light intensity up to 1023 Wcm−2 based on today’s high power laser systems, allowing for the exploration in the exotic near-QED (quantum electro-dynamics, I >1022 W/cm2) regime. Further, by manipulating the laser intensity, controlling or maximizing the outcome of laser-plasma interaction becomes possible. We show that the interaction of an intense laser beam with flat target via an MTP lens can increase the on-target laser intensity by concentrating the energy in a smaller focal spot. As a result, the generation of secondary electron, proton and γ-ray beams are enhanced.
Results
Light intensification in a micro-tube plasma target
The proposed scheme is shown in Fig. 1a. The target consists of periodic hollow micro-cylinders attached to a flat substrate. These guides can now be printed using two-photon lithography process available on most commercial 3D printers with a featured resolution around 200 nm. With many identical micro-tubes, the laser will enter one of them with a good and certain opportunity.
To get insight into the interaction of intense light with micro-tubes, we have carried out 3D PIC simulations of a high-contrast laser pulse with a single tube (Fig. 1b). A laser beam with a duration of 40 fs and intensity of 5.3 × 1021 Wcm−2 enters the target via a micro-tube of 4.8 μm diameter. Such laser pulses are available at current laser facilities51. Comparing the beam intensities outside and inside the tube reveals substantial enhancement. The laser intensity is boosted by a factor of ~3 inside the tube. A peak intensity of 1.5 × 1022 Wcm−2 is reached after the pulse has propagated a distance of 8 μm from the entrance aperture, which is much smaller than the pulse Rayleigh length (~30 λ0 in our case). Increasing laser beam intensity requires increasing the total laser energy, shortening the pulse duration, and/or decreasing the laser focal spot. Cones have been found to be able to enhance incident laser, but no physical explanation is presented52. Our detailed analyses of the spatial and temporal characteristics of the laser indicate that the light intensification is due to tight focusing of the beam. The left and right plots in Fig. 1c show the laser spatial distributions in the transverse y - z plane averaged along the propagation axis x. The dashed white line indicates the tube boundary. It is evident from these spatial profiles that the micro-tube acts as a focusing optical element. A tight focal spot with a full-width-half-maximum (FWHM) of 1.8 μm is achieved inside the tube compared to 2.9 μm (FWHM) for the input beam. Temporal snapshots of the beam did not reveal any pulse duration shortening (Fig. 1c). Both input and in-tube laser pulses show similar oscillatory motions in time.
Mechanism and scaling of light intensification
We performed a series of 3D PIC simulations to systematically study light intensification in a hollow micro-cylinder with a fixed diameter (4.8 μm). The laser intensity was varied from 1017 Wcm−2 to 1023 Wcm−2. The peak laser intensity inside the tube at each simulation time is recorded for all input pulses. The light intensification factor is determined as the ratio of the in-tube to the input pulse intensity (η = Iin–tube/Iinput). This quantity is plotted in Fig. 2a as a function of the input laser intensity. Three distinct regimes of intensification are clearly observed.
Diffraction regime
In this regime, the light intensification is independent on the laser intensity. As the electron density distribution in Fig. 2b indicates, there is no background plasma inside the tube. The interaction of the laser pulse with the tube is predominantly determined by the size of the aperture. As a result the narrowing of the focal spot is mainly due to diffraction. The intensification happens in the near-field Fresnel region, since the aperture size is large compared to the light wavelength. The intensification factor is constant at around η ≈ 2.6 for input laser amplitudes below Iinput ∼ 1019 Wcm−2. In laser-wakefield acceleration, capillary tubes filled with underdense plasma have been used for pulse guiding, though no light intensification was observed.
Depletion regime
In the second regime, the laser field is strong enough to pull-off a considerable portion of electrons from the wall of the micro-tube. These laser-induced electrons form a low density cloud, below one tenth of the critical density (Fig. 2c). These electrons are distributed in an unorganized fashion (see also in Fig. 2e). In addition to being diffracted, the laser field is depleted by the under-dense plasma electrons, leading to a slightly lower intensification factors compared to the ones in the diffraction regime.
Focusing regime
For laser intensities higher than I ≈ 6 × 1021 Wcm−2, we observe a monotonic increase of the in-tube pulse intensity. In this domain of LPI, the laser amplitude is high enough to pull-off a substantial fraction of the electrons from the walls of the micro-tube. These electrons stay together, forming periodic dense bunches, as shown in Fig. 2d,f. The averaged electron density in the tube is shown in Fig. 2e. At the inner boundary, in the vicinity of the wall, the formed plasma is over-dense (i.e. with density equal or higher to the critical density). Within this laser-induced over-dense layer, the outer edge of the laser field decays rapidly to zero in a skin depth. This layer changes the tube geometry by acting as a new tube boundary. The laser pulse sees a diameter-reduced tube in this case and the laser energy is confined to smaller focal spot.
The plasma density is lower on axis and higher when approaching the boundary. The V-shaped plasma density profile also contributes to the focusing for the propagation laser pulse. The intensification factor increases with input intensity. A laser beam with an initial intensity of 2.4 × 1022 Wcm−2 could be boosted to a peak intensity 1023 Wcm−2 using the MTP device. The experimentally unexplored near-QED (quantum electro-dynamics) regime could be within reach on the existing laser facilities using micro-tube plasma devices coupled to primary targets.
Thresholds between three regimes
The transition from the diffraction to the depletion regime occurs when the laser pulse starts to create plasma in the tube. As electrons are dragged out of the tube by the transverse laser field, they are also accelerated forward directly by the Lorentz force, specifically by direct laser acceleration (DLA) mechanism. Efficient DLA requires that an electron is accelerated to a relativistic velocity in half laser period. Considering an electron being accelerated by DLA, if the laser is non-relativistic, the electron longitudinal velocity would be much smaller than the speed of light. It will slip to the deceleration phase in less than half of the laser period, where the direction of the laser field is opposite to the one in the accelerating phase. The electron is driven outwards and scattered off immediately. In this case, electrons will not be able to reach the central area of the tube and there is no background plasma in the tube. Hence it is when the laser field at the tube boundary becomes relativistic that the electrons can be detached and stay in the tube. This gives
Here a = eEL/meω0c is the dimensionless laser electric amplitude and is the vertical distance from the propagation axis (the inner tube boundary is located at r0). For the pulse profile and tube size we employed, Eq. 1 produces a0 ≥ e(e ≈ 2.72, the Euler number), corresponding to a peak intensity of I0 ≈ 1.6 × 1019 Wcm−2, in good agreement with Fig. 2a.
The threshold between the depleting and focusing regimes corresponds to when the electron density near the inner wall becomes over-dense, i.e., at r = r0. When an electron is detached from the tube, it undergoes the transverse electric force from both the laser field and the charge separation field. The laser pulse cannot drag more electrons out as its transverse field is balanced by the charge separation one, at r = r0. From Fig. 2e, we assume the plasma density drops linearly to zero from the boundary to the axis . The charge separation field, at the inner boundary, is then . For the averaged laser field, as shown in Fig. 2f, the part Ey > 0 contributes to the electrons from the upper boundary (y > 6λ0) and vice versa. The effective laser field averaged in one laser period is . For the laser profile and tube radius we use in simulations, the dimensionless laser amplitude can be written as . The electron density at the boundary is obtained by balancing the two fields. This gives,
The laser amplitude required to create critical plasma density is athr ≈ 53(I0 ≈ 6 × 1021 Wcm−2) for r0 = 3λ0, which is consistent with the laser amplitude observed in Fig. 2a.
Applications of the MTP target
The fact that the laser beam maintains its space-time integrity and is enhanced in intensity suggest that 3D printed structures could be used, as an intermediary micro-optical element, to increase the intensity on a flat foil at the end of the tunnel and thus manipulate or maximize the outcome of the LPI. As a case study, we carried out an investigation using an input laser intensity of 5 × 1022 Wcm−2 (a0 = 150), which lies in the focusing regime. We compare two cases: 1) laser beam interacting with a traditional carbon-hydrogen (CH) flat target (Fig. 3a), 2) laser beam interacting with an identical flat target coupled to a 8 μm long 3D printed micro-tube (Fig. 3b). The introduction of the intermediary micro-optical plasma elements increases the peak intensity on the secondary flat interface to 4.3 × 1023 Wcm−2. We observe significant enhancements in terms of maximum and total energy of laser-induced electron, proton and -ray beams when the micro-tube plasma lens is used (Fig. 3c–e). Due to MTP lens, the maximum electron beam energy is increased from ~200 MeV to ~400 MeV. The laser-to-electron energy conversion efficiency for high-energy electrons (>50 MeV) is enhanced by a factor of 8 in the compound target. Consequently, the -ray beam production is enhanced by a similar factor as the high-energy electrons are decelerated by the radiation back-reaction. With a micro-tube plasma lens, the maximum photon energy reaches 50 MeV compared to only 20 MeV with a traditional flat target. The foil at the end of the micro-tube is strongly deformed due to the increased laser pressure of the intensified laser pulse. The traditional target is only slightly bent, indicating a much smaller hole-boring velocity due to the weaker on-target laser intensity. The maximum proton energy obtained with compound targets is ~350 MeV compared to only 100 MeV for flat targets for the same input laser intensity. The total number of energetic protons increases fivefold with light intensification.
Discussion
The last 30 years has seen the development of ever increasing peak intensity from pulsed lasers. The quest for extremely intense laser pulses is largely motivated by the possibility of reaching experimentally unexplored regimes of light-matter interactions as well as the production of intense ion beams for cancer therapy. To increase the light intensity, one or a combination of the pulse parameters (energy, duration and spot size) must be manipulated accordingly. Increasing the energy and/or shortening the pulse require using large optical elements due to damage threshold. Other nonconventional approaches to altering the incident laser pulse such as self-focusing53, pulse modification with capillaries54,55, coherent focusing of harmonics56 and flying mirror57 have been proposed. Additionally, structured interfaces such as nano-cells and microcylinder arrays have shown an advanced level of control over the secondary processes in the LPI58. Here, we have outlined a novel approach that leverages recent advances in micro-engineering of materials and high contrast lasers to boost light intensity using hollow micro-cylinders. The use of the micro-optical elements provides another degree of freedom that makes it possible to micro-engineer laser plasma interactions. By controlling and adjusting the spatial dimensions (aperture size, length, thickness,..) of the MTP targets, the pulse intensity can be manipulated. Hence various LPI applications can be tuned for optimal performance. Further studies show that they also act as an electromagnetic guide for secondary particle beams (will be presented elsewhere). These new results will open new paths towards micro-engineering laser plasma interactions that will benefit high field science, laser-based proton therapy, laser and particle beams, near-QED physics, nuclear physics and relativistic nonlinear optics.
Methods
Numerical modeling of the laser interaction with micro-tube plasma target
We simulate laser-plasma interaction with the full-3D particle-in-cell code VLPL59. In a simulation box of 40λ0 × 12λ0 × 12λ0 (λ0 = 0.8 μm is the laser wavelength) in x × y × z directions, a laser pulse polarized in the y direction enters from the left boundary along the x direction. The laser field amplitude has a profile of , where ω0 is the laser frequency, a = eEL/meω0c is the dimensionless laser electric amplitude. Here e, me are fundamental charge and electron mass, EL is the laser electric field, c is the speed of light in vacuum, respectively. The pulse duration and spot size are defined as τ0 and σ0. A single carbon tube is placed 10 λ0 from the left boundary, with a diameter of 6λ0. The electron density of the tube when fully ionized is ne = 300 nc and the thickness of the wall is λ0. The whole target is cold and pre-ionized. To see the full evolvement of a laser pulse in the tube, we set the tube length to be sufficiently long. The cell size is 0.02λ0 × 0.1λ0 × 0.1λ0 to resolve the fine structure and the time step is Δt = 0.008 T0 to suppress the numerical instability for high plasma density
When simulating at intensities as high as 1023 W/cm2, the recoil force on a radiating electron, i.e., the radiation reaction (RR) force must be included in LPI59,60,61,62,63. In that case, the code VLPL employs a quantum-electrodynamic (QED) model to calculate the emitted photons and the RR force64,65,66. In our simulations, we turned on the QED model when a0 ≥ 100.
Additional Information
How to cite this article: Ji, L. L. et al. Towards manipulating relativistic laser pulses with micro-tube plasma lenses. Sci. Rep. 6, 23256; doi: 10.1038/srep23256 (2016).
References
Liu, X. et al. Mid-infrared optical parametric amplifier using silicon nanophotonic waveguides. Nat. Photon. 4, 557 (2010).
Rairoux, P. et al. Remote sensing of the atmosphere using ultrashort laser pulses. Appl. Phys. B 71, 573 (2000).
Corkum, P. B. Plasma perspective on strong-field multiphoton ionization. Phys. Rev. Lett. 71, 1994 (1993).
Noda, S. et al. Full three-dimensional photonic bandgap crystals at near-infrared wavelengths. Science 289, 604 (2000).
Britnell, L. et al. Strong light-matter interactions in heterostructures of atomically thin films. Science 340, 1311 (2013).
Kao, T. S. et al. Coherent control of nanoscale light localization in metamaterial: Creating and positioning isolated subwavelength energy hot spots. Phys. Rev. Lett. 106, 085501 (2011).
Strickland, D. & Mourou, G. Compression of amplified chirped optical pulses. Opt. Commun. 56, 219 (1985).
Tajima, T. & Dawson, J. M. Laser electron accelerator. Phys. Rev. Lett. 43, 267 (1979).
Faure, J. et al. A laser–plasma accelerator producing monoenergetic electron beams. Nature 431, 541 (2004).
Mangles, S. P. D. et al. Monoenergetic beams of relativistic electrons from intense laser–plasma interactions. Nature 431, 535 (2004).
Geddes, C. G. R. et al. High-quality electron beams from a laser wakefield accelerator using plasma-channel guiding. Nature 431, 538 (2004).
Pukhov, A. & Meyer-ter-vehn, J. Laser wake field acceleration: the highly non-linear broken-wave regime. Appl. Phys. B 74, 355 (2002).
Esarey, E. et al. Physics of laser-driven plasma-based electron accelerators[J]. Rev. Mod. Phys. 81, 1229 (2009).
Leemans, W. P. et al. GeV electron beams from a centimetre-scale accelerator. Nat. Phys. 2, 696 (2006).
Malka, V. et al. Electron acceleration by a wake field forced by an intense ultrashort laser pulse. Science 298, 1596 (2002).
Malka, V. et al. Principles and applications of compact laser–plasma accelerators. Nat. Phys. 4, 447 (2008).
Wharton, K. B. et al. Experimental Measurements of Hot Electrons Generated by Ultraintense (>1019 Wcm−2) Laser-Plasma Interactions on Solid-Density Targets. Phys. Rev. Lett. 81, 822 (1998).
Wilks, S. C. et al. Absorption of ultra-intense laser pulses. Phys. Rev. Lett 69, 1383 (1992).
Clark, E. et al. Measurements of energetic proton transport through magnetized plasma from intense laser interactions with solids. Phys. Rev. Lett. 84, 670 (2000).
Wilks, S. C. et al. Energetic proton generation in ultra-intense laser–solid interactions. Phys. Plasmas 8, 542 (2001).
Snavely, R. A. et al. Intense high-energy proton beams from Petawatt-laser irradiation of solids. Phys. Rev. Lett. 85, 2945 (2000).
Schwoerer, H. et al. Laser-plasma acceleration of quasi-monoenergetic protons from microstructured targets. Nature (London) 439, 445 (2006).
Hegelich, B. M. et al. Laser acceleration of quasi-monoenergetic MeV ion beams. Nature (London) 439, 441 (2006).
Esirkepov, T. et al. T. Highly efficient relativistic-ion generation in the laser-piston regime. Phys. Rev. Lett. 92, 175003 (2004).
Macchi, A. et al. Ion acceleration by superintense laser-plasma interaction. Rev. Mod. Phys. 85, 751 (2013).
Bulanov, S. V. et al. Interaction of an ultrashort, relativistically intense laser-pulse with an overdense plasma. Phys. Plasmas 1, 745 (1994).
Lichters, R. et al. Short-pulse laser harmonics from oscillating plasma surfaces driven at relativistic intensity. Phys. Plasmas 3, 3425 (1996).
Plaja, L. et al. Generation of attosecond pulse trains during the reflection of a very intense laser on a solid surface. JOSA B 15, 1904 (1998).
Dromey, B. et al. High harmonic generation in the relativistic limit. Nat. Phys. 3, 456–459 (2006).
Ji, L. et al. Ultra-intense single attosecond pulse generated from circularly polarized laser interacting with overdense plasma. Phys. Plasmas 18, 083104 (2011).
Chen, H. et al. Relativistic positron creation using ultraintense short pulse lasers. Phys. Rev. Lett. 102, 105001 (2009).
Nodera, Y. et al. Improvement of energy-conversion efficiency from laser to proton beam in a laser-foil interaction. Phys. Rev. E 78, 046401 (2008).
Wang, F. et al. High-energy monoenergetic proton bunch from laser interaction with a complex target[J]. Phys. Plasmas 16, 093112 (2009).
Klimo, O. et al. Short pulse laser interaction with micro-structured targets: simulations of laser absorption and ion acceleration. New J. Phys. 13, 053028 (2011).
Margarone, D. et al. Laser-driven proton acceleration enhancement by nanostructured foils. Phys. Rev. Lett. 109, 234801 (2012).
Bin, J. H. et al. Ion Acceleration Using Relativistic Pulse Shaping in Near-Critical-Density Plasmas. Phys. Rev. Lett. 115, 064801 (2015).
Ceccotti, T. et al. Evidence of resonant surface-wave excitation in the relativistic regime through measurements of proton acceleration from grating targets. Phys. Rev. Lett. 111, 185001 (2013).
Bulanov, S. S. et al. Enhancement of maximum attainable ion energy in the radiation pressure acceleration regime using a guiding structure. Phys. Rev. Lett. 114, 105003 (2015).
Cerchez, M. et al. Generation of Laser-Driven Higher Harmonics from Grating Targets. Phys. Rev. Lett. 110, 065003 (2013).
Purvis, M. A. et al. Relativistic plasma nanophotonics for ultrahigh energy density physics. Nat. Photon. 7, 796 (2013).
Jiang, S. et al. Effects of front-surface target structures on properties of relativistic laser-plasma electrons. Phys. Rev. E 89, 013106 (2014).
Zou, D. B. et al. Control of target-normal-sheath-accelerated protons from a guiding cone. Phys. Plasmas 22, 063103 (2015).
Zhu, X. L. et al. Enhanced electron trapping and γ ray emission by ultra-intense laser irradiating a near-critical-density plasma filled gold cone. New J. Phys. 17, 053039 (2015).
Andriyash, I. A. et al. An ultracompact X-ray source based on a laser-plasma undulator Nat. Commun. 5, 4736 (2014).
Ivanov, V. V. et al. Amplified spontaneous emission in a Ti:sapphire regenerative amplifier. Appl. Opt. 42, 7231 (2003).
Jullien, A. et al. Highly efficient temporal cleaner for femtosecond pulses based on cross-polarized wave generation in a dual crystal scheme. Appl. Phys B 84, 409 (2006).
Thaury, C. et al. Plasma mirrors for ultrahigh-intensity optics. Nat. Phys. 3, 424 (2007).
Dromey, B. et al. The plasma mirror—a subpicosecond optical switch for ultrahigh power lasers. Rev. Sci. Instrum. 75, 645 (2004).
Lévy, A. et al. Double plasma mirror for ultrahigh temporal contrast ultraintense laser pulses. Opt. Lett. 32, 310 (2007).
Fischer, J. & Wegener, M. Three-dimensional optical laser lithography beyond the diffraction limit. Laser Photon. Rev. 7, No. 1, 22–44 (2013).
Yanovsky, V. et al. Ultra-high intensity-300-TW laser at 0.1 Hz repetition rate. Opt. Exp. 16, 2109 (2008).
Sentoku, Y. et al. Laser light and hot electron micro focusing using a conical target. Phys. Plasmas 11, 3083 (2004).
Esarey, E. et al. Self-focusing and guiding of short laser pulses in ionizing gases and plasmas. IEEE J. Quant. Electron. 33, 1879–1914 (1997).
Katzir, Y. et al. A plasma microlens for ultrashort high power lasers. Appl. Phys. Lett. 95, 031101 (2009).
Cao, L. et al. Reshaping of intense laser pulse with a capillary. Phys. Plasmas 16, 093109 (2009).
Gordienko, S. et al. Coherent focusing of high harmonics: A new way towards the extreme intensities. Phys. Rev. Lett. 94, 103903 (2005).
Bulanov, S. V. et al. Light intensification towards the Schwinger limit. Phys. Rev. Lett. 91, 085001 (2003).
Nishikawa, T. et al. Nanohole-array size dependence of soft x-ray generation enhancement from femtosecond-laser-produced plasma. J. Appl. Phys. 96, 7537 (2004).
Pukhov, A. Three-dimensional electromagnetic relativistic particle-in-cell code VLPL (Virtual Laser Plasma Lab). J. Plasma Phys. 61, 425 (1999).
Fedotov, A. M. et al. Limitations on the attainable intensity of high power lasers. Phys. Rev. Lett. 105, 080402 (2010).
Di Piazza, A. et al. Extremely high-intensity laser interactions with fundamental quantum systems. Rev. Mod. Phys. 84, 1177 (2012).
Sokolov, I. V. et al. Emission and its back-reaction accompanying electron motion in relativistically strong and QED-strong pulsed laser fields. Phys. Rev. E 81, 036412 (2010).
Ji, L. et al. Radiation-reaction trapping of electrons in extreme laser fields. Phys. Rev. Lett. 112, 145003 (2014).
Nikishov, A. I. Problems of intense external-field intensity in quantum electrodynamics. J. Sov. Laser Res. 6(6), 619 (1985).
Baier, V. N. et al. Electromagnetic Processes at High Energies in Oriented Single Crystals (World Scientific, Singapore, 1998).
Ritus, V. I. Quantum effects of the interaction of elementary particles with an intense electromagnetic field. J. Sov. Laser Res. 6(5), 497 (1985).
Acknowledgements
This work is supported by the AFOSR Basic Research Initiative (BRI) under contract FA9550-14-1-0085 and allocations of computing time from the Ohio Supercomputing Center. A.P. is supported by DFG Trnsregio TR18 (Germany).
Author information
Authors and Affiliations
Contributions
L.L.J. and K.U.A. wrote the paper with contributions from J.S. and L.L.J. conducted simulations and analysis, J.S. contributed to the proton acceleration part. A.P. developed the code used for simulations (VLPL) and along with R.R.F. provided useful suggestions. K.U.A. supervised the work.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Ji, L., Snyder, J., Pukhov, A. et al. Towards manipulating relativistic laser pulses with micro-tube plasma lenses. Sci Rep 6, 23256 (2016). https://doi.org/10.1038/srep23256
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep23256
This article is cited by
-
High efficiency laser-driven proton sources using 3D-printed micro-structure
Communications Physics (2022)
-
Transition from Coherent to Stochastic electron heating in ultrashort relativistic laser interaction with structured targets
Scientific Reports (2017)
-
Laser-Driven Ion Acceleration from Plasma Micro-Channel Targets
Scientific Reports (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.