For a better understanding of the mechanisms behind cellular functions, quantification of the heterogeneity in an organism or cells is essential. Recently, the importance of quantifying temperature has been highlighted, as it correlates with biochemical reaction rates. Several methods for detecting intracellular temperature have recently been established. Here we develop a novel method for sensing temperature in living cells based on the imaging technique of fluorescence of quantum dots. We apply the method to quantify the temperature difference in a human derived neuronal cell line, SH-SY5Y. Our results show that temperatures in the cell body and neurites are different and thus suggest that inhomogeneous heat production and dissipation happen in a cell. We estimate that heterogeneous heat dissipation results from the characteristic shape of neuronal cells, which consist of several compartments formed with different surface-volume ratios. Inhomogeneous heat production is attributable to the localization of specific organelles as the heat source.
Temperature is one of the most important parameters of the intracellular environment because it changes the dynamics and the reactivity of biomolecules1. Each biological reaction that controls cell functions occurs either exothermically or endothermically in particular microdomains of a cell. Biological reactions cause the release of Gibbs free energy, which triggers cellular functions. The unused energy is transformed into heat; the heat production then elevates the local temperature. Proton transfer through the mitochondrial inner membrane is a mechanism of thermogenesis and acts as a heat source in a cell2. The endoplasmic reticulum (ER) also produces heat via calcium pump activity3. These mechanisms are the assumed scenarios for any increase in temperature locally, as a result reaction rates are accelerated following the change in chemical equilibria. Therefore, if there exists a heterogeneous temperature distribution within a cell, it may strongly correlate with cell activities via biochemical reaction processes. The temperature distribution within a cell measured in the previous studies may be too small to affect the cellular functions, which has not been indicated a strong correlation between their shapes and the functions, such as with fibroblast4,5. However, it can play significant roles in intricately shaped cells, for example, neuronal cells, because cell body can have a larger volume divided by a surface area compared to neurites. The energy exchange between intra- and extracellular domains is also thought to show asymmetric patterns dependent on both spatial and functional asymmetric properties of the cells.
Fluorescence-based imaging has been the main strategy for intracellular thermometry6,7,8, because it can be non-invasive and can have a high spatiotemporal resolution compared with a classical calorimetry9 or infrared thermography10. EuTTA11,12,13, fluorescent proteins14,15, gold nanoclusters16, nanodiamonds17, small molecules targeting a specific organelle18,19, polymer nanoparticles5,20,21, quantum dots4,22 and silica nanoparticles23 are utilized as thermosensors in combination with several optical arrangements. Temperature measurement is achieved by the appropriate combination of thermometric properties and thermosensors. Fluorescence imaging-based thermometry utilizes the temperature dependent change of emission intensity, emission lifetime, or emission wavelength at maximum intensity. These techniques have revealed the temperature distribution5 or event-driven temperature elevation in a cell4,13,15.
These previous works suggest that many biochemical reactions in a cell are influenced by the local heat production and heterogeneity of temperature. In particular, the reactions and hence the functions of structurally complicated cells such as neuronal cells are likely to be related to differences in temperature. However, there have been no reports on the temperature difference in neuronal cells and there is no definite information about how the heterogeneity of temperature is formed. In order to detect the subtle temperature differences in a cell which should maintain the in vivo environment, non-invasive measurement, non-localization and stable temperature sensitivity of thermosensors are important factors. Taking these requirements into account, existing thermometry using quantum dot-based nanoparticles is thought to be suitable, as it satisfies these requirements. Quantum dots have broader excitation wavelengths and brighter fluorescence than other thermodetectors24. This makes them easy to detect, although their erratic behaviour sometimes presents problems4. However, detecting their temperature dependent shift of emission wavelength at maximum intensity requires a spectrograph with a high resolution of grating, as suggested above25.
In this paper, we developed a novel method for both sensing intracellular time-lapse temperature change and spatial temperature difference by utilizing commercially available quantum dot-based nanoparticles and a confocal microscope. We demonstrate how to detect the temperature increase after the mitochondrial stimulation with the sequential observation of single quantum dot and for the first time the temperature difference within a neuronal cell by using multiple quantum dot imaging and suggest the cause of heterogeneity of temperature by using the characteristic shape of neuronal cells based on the actual 3D observation.
Quantum dot-based ratiometric thermometry
The maximum emission wavelength of quantum dots exhibits red shift dependent on the temperature26 with a sensitivity of 0.105 nm/°C25. But this sensitivity means that detecting 1 °C or less difference requires a resolution of about 0.1 nm. Moreover, the acquisition of the fluorescence spectrum takes too long time to measure the spatial or temporal temperature profiles. We focused on the red shift of quantum dots and examined whether or not a ratio of fluorescence intensity lower an wavelength and that higher , which can be resolved by an ordinary spectroscopic system, has dependency on temperature (Fig. 1a). The fluorescence intensity ratio was acquired by splitting the emission spectrum of a single quantum dot with a monochromator and by detecting them separately with a photomultiplier tube (PMT). We set up an experimental system for the ratiometry, using a confocal laser scanning microscope (FV1000, Olympus). Quantum dots were excited by 405 nm excitation laser. Ambient temperature was controlled and monitored with a stage-top incubator and a thermocouple (experimental set-up is shown in Fig. 1b).
Surface modified quantum dots, Qtracker Cell Labeling Kit (Q25021MP, Molecular Probes) are known to be incorporated into various cell lines thorough an endocytotic process27,28. A human derived neuronal cell line, SH-SY5Y, also endocytosed quantum dots after neuronal differentiation29. We prepared the 50 nM medium solution of this quantum dot crystals and measured its fluorescence spectrum with 2 nm resolution of wavelength and 40× objective (Fig. 1c). Fitting the spectrum by Gaussian function, its mean value was calculated to 651.0 nm. When was set to 650 nm (near the mean value) and acquiring band widths of wavelength to 20 nm, the fluorescence intensity ratio (fluorescence intensity in 650–670 nm divided by that in 630–650 nm) exhibited significant difference between 27 °C and 47 °C (Fig. 1d,e). Thus we concluded the ratio nm) as thermosensitive parameter.
Fluorescence intensity ratio of single quantum dot as a thermosensitive parameter for time course analyses
In our experiments the number of quantum dots incorporated into SH-SY5Y cells was kept low as they could be detected as independent particles. We performed the measurements of thermometry with each single quantum dot. In order to quantify the resolution and sensitivity of single quantum dots to temperature, we prepared a medium containing 1 nM quantum dots and performed the ratiometry. Both fluorescence intensity at 630–650 nm and 650–670 nm were captured with 100× objective (Fig. 2a). We first confirmed the effect of photobleaching on the fluorescence intensity ratio. In repeating the measurements, single quantum dot photobleached and the fluorescence intensity decreased as well as the fluorescence intensity ratio (Fig. 2b). The photobleaching curve of the fluorescence intensity ratio was fitted by an exponential function (eq. (2)). In following measurements the fluorescence intensity ratios were all calibrated by the function. The uncertainty of the fluorescence intensity ratio was also estimated from the time-lapse measurements (Fig. 2b) and it was 0.098 for 95% confidence interval. Thus we determined the temperature resolution of our methods as 0.098.
In our optical set-up (Fig. 1b), each quantum dot keeps moving around the focal plane by the thermal expansion of equipments and by Brownian motion of the particle and it contributes to the focal position deviation and to the dispersion of fluorescence intensity ratio. We measured the fluorescence intensity ratio as changing the z position of microscope stage. Both the fluorescence intensity and the ratio were decremented along with the focal plane was close to the center of the particle (Fig. 2c). In the range of peak position ±0.25 μm the fluorescence intensity ratio was not changed, so we determined to use the sample only in this range for following experiments.
We measured the fluorescence intensity ratio of a single quantum dot at 31–41°C which was controlled by a stage-top incubator. In all samples the fluorescence intensity ratio increased as the ambient temperature in the incubator was significantly elevated in this temperature range (Fig. 2d). The mean slope in this measurement was 0.062/°C and this is the temperature sensitivity of the fluorescence intensity ratio for our thermometry. Consequently, we confirmed the ratio as the relevant parameter to describe the correlation between temperature and the change of fluorescent peak drift. At the same time, photobleaching and the fluctuation of heating with the stage and chemical parameters30 do not correlate with the change of fluorescent peak drift. Reversibility of the fluorescence intenisity ratio was also examined as discussed in the past31,32,33. When cycling the measurements of R between two different temperatures, R did not changed (Supplementary Fig. S1). Thus the fluorescence intensity ratio was reversible.
Next we applied our thermometry to the living cell system. SH-SY5Y cells incorporated quantum dots and quantum dots localized in cytoplasm (Supplementary Fig. S2). We researched the temperature sensitivity of the fluorescence intensity ratio inside living cells. Single quantum dot in cytoplasm exhibited the positive correlation between the fluorescence intensity ratio and temperature (Supplementary Fig. S3). The slope was 0.067/°C and it can be compatible to the result outside cells (Fig. 2d), meaning that the temperature sensitivity of the fluorescence intensity ratio shows the robustness to the surroundings such as cytoplasma and culturing media.
Measurement of thermogenesis in mitochondria
In order to confirm the validity of our temperature-sensing method in living cells, we measured the heat production in mitochondria. Carbonyl cyanide 3-chlorophenylhydrazone (CCCP), a protonophore and an uncoupler of oxidative phosphorylation, is known to accelerate the thermogenesis in mitochondria34. We applied 10 μM CCCP to undifferentiated SH-SY5Y cells labelling mitochondria and incorporating quantum dots (Fig. 3a) and measured R of each quantum dots near mitochondria before and after the stimulation with CCCP.
Calibrated R values of single quantum dots near mitochondria were stable in large part during observation, while they tended to be high after the stimulation with CCCP (Fig. 3b). Although the R for each quantum dot has large variance, its behaviour on temperature change is comparable (Fig. 3b). Taking into account the resolution of R (Fig. 2d), R values were increased (out of the range in resolution) after the application of CCCP in large part (Fig. 3c,d). The mean temperature change was 0.94 °C and these observations were comparable to the previous work15. SH-SY5Y cells were also stimulated by DMSO. Then the temperature change with CCCP was larger than that with DMSO. Therefore, we concluded that the fluorescence intensity ratio has ability to detect the temperature change in living cells.
Temperature difference in different compartments of neuronal cells
We investigated the existence of a spatial difference of temperature in a neuronal cell. For this purpose, we first evaluated the neuronal differentiation of SH-SY5Y cells in our experiment. SH-SY5Y cells were treated with 13-cis retinoic acid (RA) for 14 days to differentiate them35. To confirm the differentiation, neuron-specific class III β-tubulin (Tuj1)36 and intermediate filament-associated protein Nestin37 were labeled with antibodies conjugated with fluorophore. Tuj1 as the differentiated marker and Nestin as the undifferentiated marker were detected by a confocal microscope (Supplementary Fig. 4a). More quantitatively, both the RA treated cell population (RA+) and the non-treated cell population (RA−) were analyzed by flow cytometry. RA− exhibited a higher fluorescence intensity of Nestin than RA+ and RA− exhibited a lower fluorescence intensity of Tuj1 than RA+ (Supplementary Fig. 4b,c). We therefore concluded that RA+ cells were differentiated enough to have functions as neuronal cells.
Quantum dots were incorporated into RA+ cells and each R value of a quantum dot in the cells was measured by our ratiometry. In order to determine the position of quantum dots, nuclei and mitochondria were stained (Fig. 4a). In SH-SY5Y cells, each region of interest as a single quantum dot which had a Gaussian luminescence distribution and thus differed from aggregated particles was selected for measurements (Fig. 4b). Although quantum dots are known to exhibit a size-dependent spectral shift38, no significant size-dependency was shown in our experiments. However, some R values did not follow the temperature-dependency and it was conspicuous in a sample with larger diameter which was estimated from the fluorescence image. Thus we set two diameter thresholds; the upper and lower thresholds were the mean ± s.d. and only the quantum dots which had their diameter between the thresholds were analyzed further (Fig. 4c). These samples had a variance in R at certain temperatures (Fig. 4d) and the 90% confidence interval was 0.16. This value was larger than the resolution of R and so 0.16 is the resolution of R for our spatial temperature measurement.
The quantum dots measured were separated into 2 groups in terms of the compartments they existed in, that is the cell body and the neurites. The mean R value of the sample from the cell body was 1.74 and that from neurites was 1.64 (Fig. 4e). The mean R difference was 0.10 (p-value = 0.062). This result means that the temperature in the cell body was 1.6 °C higher than that in neurites. Therefore, our thermometry detected the temperature difference in a neuronal cell.
In this study, we have constructed a method for measuring the intracellular temperature difference in a cell, which is based on commercially available quantum dot nanocrystals as the thermosensor and single particle spectroscopy as the principle of temperature detection. We developed two types of measuring strategies, one is for time course detection of temperature by using single particle, another is for detecting spatial distribution of intracellular temperature by taking the images of multiple quantum dot at the same timing. In both cases, we used the fluorescence intensity ratio.
In a previous work using quantum dots as a thermosensor4, temperature was calculated from the emission wavelength at the maximum intensity. Whether it is possible to obtain precise results by this method strongly depends on the resolution of the detector because of its principle. Compared to the above conventional method, the advantage of using the fluorescence intensity ratio, which is equal to detecting the total shift of the emission wavelength, is that this strategy is not susceptible to depend on the resolution of the detector but can contribute to the easier detection of temperature using a monochromator with a resolution of only 1 nm wavelength.
The relative temperature sensitivity is useful to evaluate the performance of various thermometry, each of which uses distinct thermometric parameters such as intensity, intensity ratio and wavelength39. The relative temperature sensitivity (S) is defined as:
where Q corresponds to the variation of a thermometric parameter with temperature (T). In our method, thermometric parameters are the fluorescence intensity ratio and the maximum value of S(Sm), which was 6.3%/K on average in Fig. 2d. In the conventional method using quantum dots25, Sm is approximately 0.016%/K, so our method can improve the relative sensitivity. The limitation of the resolution of our temperature detection system is dependent on the optical resolution (approximately 200 nm), because the size of the quantum dot is smaller (10–20 nm) than the limitation of optical resolution. Temperature spatial resolution is provided in a previous work15 and the value of conventional infrared thermography is the order of 10 μm39. Although in our method it is difficult to determine the spatial resolution in this definition because each quantum dot particle is not solute and is a smaller particle than the optical resolution, at the same time the frequency of quantum dot per volume was sparse for keeping the independency of each fluorescence, it can be comparable to our spatial resolution in terms of optical resolution (200 nm). Calorimetry is also one of the useful method to assess the temperature in living cells but it can only detect the heat production at single cell level40. By using a higher-resolution optical system such as a super-resolution microscope, the spatial resolution of our system will be improved.
We evaluated the temperature sensitivity of fluorescence intensity ratio of a single quantum dot both in media and a cellular condition. This is common research because the temperature sensitivity of thermometer can be altered by the environmental condition such as protein concentration, pH, or ionic strength16,19. Our evaluation indicated that the fluorescence intensity ratio of single quantum dot exhibited the similar sensitivity, so our methods is applicable to the temperature detection regardless of the cellular condition or not.
Our experimental results demonstrate a large variance of R both outside (Fig. 2) and inside (Figs 3 and 4) the cells. The cause of this variance is thought to be the combined factors of followings: 1) an uncertainty of the fluorescence intensity ratio of single quantum dot (Fig. 2b), 2) a variance of the fluorescence intensity ratio in distinct quantum dots (Fig. 4d), 3) the distance between quantum dots where thermometry was executed and certain organelles as a heat source4 and 4) a heterogeneity in temperature in cytoplasm5,21. We eliminated the factor (2) by excluding some erratic samples which had a larger or smaller estimated diameter than major samples of diameter of quantum dot (Fig. 4c). The factor (1) was possibly caused by the resolution of the monochromator or the precision of the temperature controlling devices. In our method, the factor (1) will diminish by using higher-performance devices and the accuracy was to some extent assured by the number of trials in order to detect the temperature difference.
We performed time course measurements with single quantum dot and analysed spatial distribution with multiple quantum dots, separately. By checking the precision of our method based on the single quantum dot measurement, we found that the divergence of temperature-ratio correlation lines was mainly proceeded from the difference of individual character of each quantum dot, which appeared as their intercepts of correlation lines. It was clear that the correlation between temperature and ratio was strong (correlation coefficients R are 0.91 ~ 0.94) when we calculate the correlation line for each quantum dot despite if we merge all the data produced with different quantum dots, the correlation of temperature and ratio was moderate (R = 0.61). In order to avoid the effect of the difference among each quantum dot, instead of merging the data points of different quantum dots, we calculated correlation lines for each quantum dot and took their mean of the slope values.
We evaluated our originally established method for thermometry by using well-analysed cell biological heating phenomena (Fig. 3). CCCP treatment is expected to an elicit increase in intracellular temperature15. Our results exhibit a large variance in R as discussed above. This happens mainly because the ratio of quantum dots has variance which is originated in the variance of each quantum dot (Fig. 2d). The difference in R still existing of before and after the application of CCCP indicates the acceleration of thermogenesis in mitochondria. The difference in temperature before and after the stimulation (Fig. 3c) was not significant. This is because there exists a temperature distribution in mitochondria15 and the distance between quantum dots and mitochondria cannot be completely controlled. We thus concluded that our originally established thermometry method is sufficient to analyze the intracellular upregulation of temperature at the physiological environment.
For the purpose of researching the temperature difference in neuronal cells, we conducted our established thermometry with SH-SY5Y cells. The R difference between a cell body and neurites showed 0.10 corresponding to a few degree based on the calibration line (Fig. 2d). This result is reasonable as the distribution of an intracellular temperature distribution by comparing its range with the previous works about the temperature detection of different organelle. We confirmed this by producing a range of confidence intervals for the slope. By applying the steep line in the range of confidence intervals to calculate the temperature, it is possible for the difference in absolute temperature is possible to be 1 °C only. In order to guarantee the quantitative significance of the results, we will need to eliminate the variance of R, as stated above.
Our thermometry reveals for the first time the heterogeneity of temperature in the cytoplasm of neuronal cells. However, the existence of an intracellular temperature distribution is controversial41. In order to explain the temperature distribution in such a small region as the cell body and neurites, we considered two hypotheses. One is that their characteristic shape can contribute to the difference in ability to store heat. To quantify their ability to store heat, we calculated the specific surface area of the cell body and neurite from z-stack fluorescence images. The results of the experiments showed that the surface area of a neurite is approximately 1.3 times larger than that of cell body. This result implies that a neurite dissipates heat more easily and corresponds more closely to ambient temperature than the cell body. At the same time, cell body includes a particular heat source, nucleus, which is not involved in neurites. It was observed that the temperature of a nucleus is about a degree higher than that of the cytoplasm5. This fact can be the cause to maintain the temperature of cell body high by retaining the produced heat. To build a clearer hypothesis, it will be efficient to perform a simulation of heat conduction by using the actual z-stack images of cells.
Surface-volume ratio is an index which can be calculated the quantitative values of area and volume of the objects, which are the direct quantities to estimate further cause of thermal storage or dissipation and seems it has a measurable significance. Now we got the other question that if the shape of the object itself is also significant or not. In this point of view, surface-volume ratio is not always appropriate to appreciate it. We analysed another index to figure out the difference between the shape of a cell body and a neurite. Sphericity is an index to compare the roundness of a 3-dimensional (3D) object. If the value equals 1.0, that means the 3D object is a perfect sphere, if the shape of 3D object is discrete from a sphere, the value is close to 0. We calculated this value of the cell body region and the neurite region as the first step to compare the characteristics of their shape. The sphericity of the cell body was 0.34, the value of the neurite was 0.28. The ratio of sphericity between the value of the cell body and the neurite . There exists positive correlation between the temperature and the sphericity within the limits of our analysis until now. We need further investigation to get conclusion with more detailed analyses of the shape of each target compartment.
Another hypothesis is that the types of reactions occurring in the cell body and in the neurites are different in order to generate different functions and this causes the difference in the amount of heat production. Several previous works have shown a temperature increase inside a cell following the influx of Ca2+ ion4,11,13,18. The localized influx of Ca2+, for example in synapses, can cause the temperature difference inside a neuron. This localization of reactions dependent on their types can be seen in previously established long-term memory models. Our previous work showed that reaction-limited reactions mainly exist in the cell body and diffusion-limited reactions are localized in neurites42. However, the reaction-limited system is in principle more difficult to be affected by temperature; this means that a higher temperature in the cell body is probably little affected for generating functions and vice versa.
This paper shows that temperature difference does exist in micrometer scale domains in a cell. Although mapping temperature spatiotemporally will continue to be challenging future work, the methodology is in the process of being sophisticated. Recently a technique of heating cell locally by using IR laser has also been developed43,44,45. Furthermore, a theoretical approach to understanding the cell dynamics such as microtubule shrinkage has been reported46. These techniques are all useful to study not only unknown mechanisms related to proteins working as a heat source but also various behaviors related to heat production such as energy metabolism, apoptosis or neoplastic transformation.
Quantum dot samples
Quantum dots Qtracker 655 Cell Labeling Kit (Q25021MP, Invitrogen) was used for all following measurements. Qtracker nanocrystals and Qtracker carrier were mixed and incubated for 5 min at room temperature to prepare the 1 μM solution. The solution was diluted with 37 °C cell culture medium for the concentration of 10 nM or 50 nM and vortexed for 30 seconds.
For the measurements of single quantum dot outside cells, 10 nM solution was further diluted to 1 nM.
For ratiometry, a confocal laser scanning microscope and its software (FV1000, Olympus) and 40× (numerical apeture (N.A.) 1.3) or 100× (N.A. 1.4) objective were used. Ambient temperature near the region of interest was monitored with a thermocouple (5SC-TT-K-36-36, Omega Engineering) and Arduino (ARDUINO-A000057, Switch Science) and controlled with a stage-top incubator (INUG2-ONICS, Tokai Hit). Diluted quantum dot solution was mounted on the 35 mm glass base dish and placed in the stage-top incubator set on the microscope stage. Quantum dots were excited by 405 nm laser, then its emission spectrum was dispersed in the range of 630–650 nm and 650–670 nm by a monochromator. The two emission spectra were collected by PMT and imaged with software. Total fluorescence intensity in the region of interest for 650–670 nm was divided by that for 630–650 nm and the value (fluorescence intensity ratio) was defined as the thermometric parameter.
For the acquisition of fluorescence spectrum of 50 nM quantum dots solution, 405 nm laser was applied to the sample. The emission in the range of 600–700 nm was split every 2 nm and detected by PMT. Acquired spectrum was fitted by Gaussian function and the mean value was estimated.
Evaluation of fluorescence intensity ratio of single quantum dot
100× oil objective (N.A. 1.4) was used. To evaluate the photobleaching effect, fluorescence intensity ratio of single quantum dot was repeatedly acquired every 1 sec, 500 times. Photobleaching curve was fitted by the function:
where and are the initial value and the equilibrium value of the fluorescence intensity raito, respectively and λ is the decay constant. As a result the decay constant was determined as 0.00635 s−1. In order to get the z profile of fluorescence intensity ratio, z-Stack image acquisition for single quantum dot was performed with FV1000. Focal plane was decremented by 0.05 μm. Acquired fluorescence intensities and fluorescence intensity ratios were calibrated by the photobleaching curve (eq. (2)) shown in Fig. 2b. To evaluate the temperature sensitivity of single quantum dot outside the cells, the fluorescence intensity ratio was measured at each temperature, which was changed by 1.0 °C in a range of 30–42 °C. The reversibility of the fluorescence intensity ratio to the temperature was examined by the repetitive aquisition at 40 °C and 30 °C controlled by a stage-top incubator.
Cell culture and differentiation
We obtained a SH-SY5Y cell line from the European Collection of Cell Cultures (ECACC) Cell Bank; the cell line Cat. No. is 94030304. Cell culture reagents for SH-SY5Y cells were obtained from Wako Pure Chemical Industries Ltd (Osaka, Japan).
The cell line was cultured routinely in Dulbecco’s Modified Eagle MediumNutrient Mixture F-12 (DMEMF-12) supplemented with 15% fetal bovine serum (FBS) in 5% CO2 incubator at 37 °C. In all experiments with a microscope, cells were subcultured in a 35 mm glass base dish (IWAKI) coated with 150 μg/mL collagen (Cellmatrix Type IV, Nitta Gelatin). For neuronal differentiation, 13-cis retinoic acid (R3255, Sigma) was added to the culture medium at 10 μM every 2 days for 14 days.
Temperature measurements in living cells
The culture medium in the 35 mm glass base dish with living SH-SY5Y cells was replaced with 10 nM quantum dot solution and incubated for 60 min in a 5% CO2 at 37 °C. Then the cells were washed with culture medium and used for measurements. In the measurements, temperature were kept 37 °C by a stage-top incubator. All the ratiometry in living cells were performed with 100× (N.A. 1.4) objective. To evaluate the temperature sensitivity of single quantum dot inside the cells, cells were labelled with Hoechst 33342 (PA-3014, Lonza). The fluorescence intensity ratio was measured at each temperature, which was changed by 1.0 °C in a range of 30–40 °C. To measure the thermogenesis in mitochondria, cells were labelled with MitoTracker Green FM (M7514, Molecular Probes) and Hoechst 33342. 10 μM CCCP (C2759, Sigma) as a chemical stimulus was applied to the cells. The fluorescence intensity ratio of single quantum dot near mitochondria was acquired every 30 seconds before and after the stimulation.
For the acquisition of fluorescence images of SH-SY5Y cells, confocal laser scanning microscope (FV1000, Olympus) and 40× (N.A. 1.3) or 100× (N.A. 1.4) objective were used. DNA labelled with Hoechst 33342, mitochondria labelled with MitoTracker Green FM and quantum dots were excited by a 405 nm laser or a 488 nm laser and the images were captured through dichroic mirrors, emission filters and PMTs.
SH-SY5Y cells were fixed with 4% formaldehyde (064–00406, Wako) for 15 min at room temperature and then washed and incubated in PBS containing 0.1% Triton X-100 (A16046, Alfa Aesar) for 10 min at 4 °C for permeabilization. The cells were incubated in PBS containing 1% BSA (017–22231, Wako) for 30 min at 4 °C for blocking. Primary antibodies and secondary antibodies were incorporated and then the cells were incubated overnight at 4 °C and for 60 min at room temperature. After the antibodies had been removed, the nuclei were stained with 0.1 μg/mL Hoechst 33342 (PA-3014, Lonza) for 5 min at room temperature.
The following combination of primary and secondary antibodies diluted by 1% BSA in PBS was used: a rabbit monoclonal anti-Nestin (ab105389, 1:200, Abcam) and a donkey anti-rabbit-IgG(H+L) conjugated with Alexa Fluor 594 (a21207, 1:1000, Invitrogen) and a mouse monoclonal anti-Tuj1 (mms-435p-100, 1:1000, BioLegend) and a donkey anti-mouse-IgG(H+L) conjugated with Alexa Fluor 488 (a21202, 1:1000, Invitrogen).
405, 488 and 559 nm continuous wave lasers were used to excite the fluorescent dye through a confocal microscope (FV1000, Olympus). An objective (40×, N.A. 1.3) was used to acquire the spectra. Each emission of fluorescent dye was collected through dichroic mirrors and an emission filter and imaged by a PMT.
To validate the neuronal differentiation of SH-SY5Y cells, retinoic acid-treated cells were analyzed by flow cytometry. SH-SY5Y cells were fixed with 4% formaldehyde for 15 min at 4 °C and then washed and permeabilized with 0.1% Triton X-100 for 15 min at 4 °C. The cells were incubated with primary antibodies for 30 min at room temperature and then incubated with the corresponding secondary antibodies for 30 min at room temperature.
The combination of primary and secondary antibodies diluted by 3% BSA in PBS was the same as that used in the immunostaining. The dilution ratio was as follows: anti-Nestin (1:50), anti-rabbit-IgG (1:500), anti-Tuj1 (1:100), anti-mouse-IgG (1:500).
The cells were analyzed with a flow cytometer (Epics XL, Beckman Coulter). Fluorescent dyes were excited with an Ar Laser beam and their emission spectra were collected through a 525 band path filter or 620 band path filter into each PMT. All the experimental results were analyzed with a flow cytometry data analysis tool (FlowJo, http://www.flowjo.com).
3D image analysis
Surface area, volume and sphericity of cell compartment were calculated using ImageJ 3D Shape plugin.
How to cite this article: Tanimoto, R. et al. Detection of Temperature Difference in Neuronal Cells. Sci. Rep. 6, 22071; doi: 10.1038/srep22071 (2016).
Duhr, S. & Braun, D. Why molecules move along a temperature gradient. Proceedings of the National Academy of Sciences 103, 19678–19682 (2006).
Andrews, Z. B., Diano, S. & Horvath, T. L. Mitochondrial uncoupling proteins in the cns: in support of function and survival. Nature Reviews Neuroscience 6, 829–840 (2005).
Bal, N. C. et al. Sarcolipin is a newly identified regulator of muscle-based thermogenesis in mammals. Nature medicine 18, 1575–1579 (2012).
Yang, J.-M., Yang, H. & Lin, L. Quantum dot nano thermometers reveal heterogeneous local thermogenesis in living cells. Acs Nano 5, 5067–5071 (2011).
Okabe, K. et al. Intracellular temperature mapping with a fluorescent polymeric thermometer and fluorescence lifetime imaging microscopy. Nature communications 3, 705 (2012).
Brites, C. D. et al. Thermometry at the nanoscale. Nanoscale 4, 4799–4829 (2012).
Jaque, D. & Vetrone, F. Luminescence nanothermometry. Nanoscale 4, 4301–4326 (2012).
Sakaguchi, R., Kiyonaka, S. & Mori, Y. Fluorescent sensors reveal subcellular thermal changes. Current opinion in biotechnology 31, 57–64 (2015).
de Meis, L. Uncoupled atpase activity and heat production by the sarcoplasmic reticulum ca2+-atpase regulation by adp. Journal of Biological Chemistry 276, 25078–25087 (2001).
Paulik, M. A. et al. Development of infrared imaging to measure thermogenesis in cell culture: thermogenic effects of uncoupling protein-2, troglitazone and β-adrenoceptor agonists. Pharmaceutical research 15, 944–949 (1998).
Suzuki, M., Tseeb, V., Oyama, K. & Ishiwata, S. Microscopic detection of thermogenesis in a single hela cell. Biophysical journal 92, L46–L48 (2007).
Oyama, K. et al. Walking nanothermometers: spatiotemporal temperature measurement of transported acidic organelles in single living cells. Lab Chip 12, 1591–1593 (2012).
Takei, Y. et al. A nanoparticle-based ratiometric and self-calibrated fluorescent thermometer for single living cells. ACS nano 8, 198–206 (2013).
Donner, J. S., Thompson, S. A., Kreuzer, M. P., Baffou, G. & Quidant, R. Mapping intracellular temperature using green fluorescent protein. Nano letters 12, 2107–2111 (2012).
Kiyonaka, S. et al. Genetically encoded fluorescent thermosensors visualize subcellular thermoregulation in living cells. Nature methods 10, 1232–1238 (2013).
Shang, L., Stockmar, F., Azadfar, N. & Nienhaus, G. U. Intracellular thermometry by using fluorescent gold nanoclusters. Angewandte Chemie International Edition 52, 11154–11157 (2013).
Kucsko, G. et al. Nanometre-scale thermometry in a living cell. Nature 500, 54–58 (2013).
Arai, S., Lee, S.-C., Zhai, D., Suzuki, M. & Chang, Y. T. A molecular fluorescent probe for targeted visualization of temperature at the endoplasmic reticulum. Scientific reports 4 (2014).
Arai, S. et al. Mitochondria-targeted fluorescent thermometer monitors intracellular temperature gradient. Chemical Communications 51, 8044–8047 (2015).
Tsuji, T., Yoshida, S., Yoshida, A. & Uchiyama, S. Cationic fluorescent polymeric thermometers with the ability to enter yeast and mammalian cells for practical intracellular temperature measurements. Analytical chemistry 85, 9815–9823 (2013).
Hayashi, T., Fukuda, N., Uchiyama, S. & Inada, N. A cell-permeable fluorescent polymeric thermometer for intracellular temperature mapping in mammalian cell lines. PloS One 10, e0117677 (2015).
Maestro, L. M. et al. Cdse quantum dots for two-photon fluorescence thermal imaging. Nano letters 10, 5109–5115 (2010).
Yang, L. et al. Luminescent ru (bpy) 3 2+-doped silica nanoparticles for imaging of intracellular temperature. Microchimica Acta 181, 743–749 (2014).
Zrazhevskiy, P. & Gao, X. Quantum dot imaging platform for single-cell molecular profiling. Nature communications 4, 1619 (2013).
Li, S., Zhang, K., Yang, J.-M., Lin, L. & Yang, H. Single quantum dots as local temperature markers. Nano letters 7, 3102–3105 (2007).
Walker, G. W. et al. Quantum-dot optical temperature probes. Applied Physics Letters 83, 3555–3557 (2003).
Jaiswal, J. K., Mattoussi, H., Mauro, J. M. & Simon, S. M. Long-term multiple color imaging of live cells using quantum dot bioconjugates. Nature biotechnology 21, 47–51 (2002).
Hanaki, K.-i. et al. Semiconductor quantum dot/albumin complex is a long-life and highly photostable endosome marker. Biochemical and biophysical research communications 302, 496–501 (2003).
Desplats, P. et al. Inclusion formation and neuronal cell death through neuron-to-neuron transmission of α-synuclein. Proceedings of the National Academy of Sciences 106, 13010–13015 (2009).
Medintz, I. L., Uyeda, H. T., Goldman, E. R. & Mattoussi, H. Quantum dot bioconjugates for imaging, labelling and sensing. Nature materials 4, 435–446 (2005).
Maestro, L. M. et al. Cdte quantum dots as nanothermometers: towards highly sensitive thermal imaging. Small 7, 1774–1778 (2011).
Zhou, D. & Zhang, H. Critical growth temperature of aqueous cdte quantum dots is non-negligible for their application as nanothermometers. Small 9, 3195–3197 (2013).
Maestro, L. M. et al. Response to “Critical growth temperature of aqueous cdte quantum dots is non-negligible for their application as nanothermometers”. Small 9, 3198–3200 (2013).
Terada, H. The interaction of highly active uncouplers with mitochondria. Biochimica et Biophysica Acta (BBA)-Reviews on Bioenergetics 639, 225–242 (1981).
Masiá, S., Alvarez, S., de Lera, A. R. & Barettino, D. Rapid, nongenomic actions of retinoic acid on phosphatidylinositol-3-kinase signaling pathway mediated by the retinoic acid receptor. Molecular Endocrinology 21, 2391–2402 (2007).
Agholme, L., Lindström, T., Kågedal, K., Marcusson, J. & Hallbeck, M. An in vitro model for neuroscience: differentiation of sh-sy5y cells into cells with morphological and biochemical characteristics of mature neurons. Journal of Alzheimer’s Disease 20, 1069–1082 (2010).
Lopes, F. M. et al. Comparison between proliferative and neuron-like sh-sy5y cells as an in vitro model for parkinson disease studies. Brain research 1337, 85–94 (2010).
Neeleshwar, S. et al. Size-dependent properties of cdse quantum dots. Physical Review B 71, 201307 (2005).
Brites, C. D. et al. Organic-inorganic eu3+/tb3+ codoped hybrid films for temperature mapping in integrated circuits. Frontiers in chemistry 1, 10.3389/fchem.2013.00009 (2013).
Inomata, N., Toda, M., Sato, M., Ishijima, A. & Ono, T. Pico calorimeter for detection of heat produced in an individual brown fat cell. Applied Physics Letters 100, 154104 (2012).
Baffou, G., Rigneault, H., Marguet, D. & Jullien, L. A critique of methods for temperature imaging in single cells. Nature methods 11, 899–901 (2014).
Takizawa, H., Hiroi, N. & Funahashi, A. Mathematical modeling of sustainable synaptogenesis by repetitive stimuli suggests signaling mechanisms in vivo. PLoS One 7, e51000 (2012).
Tseeb, V., Suzuki, M., Oyama, K., Iwai, K. & Ishiwata, S. Highly thermosensitive ca2+ dynamics in a hela cell through ip3 receptors. HFSP journal 3, 117–123 (2009).
Oyama, K. et al. Microscopic heat pulses induce contraction of cardiomyocytes without calcium transients. Biochemical and biophysical research communications 417, 607–612 (2012).
Itoh, H., Oyama, K., Suzuki, M. & Ishiwata, S. Microscopic heat pulse-induced calcium dynamics in single wi-38 fibroblasts. BIOPHYSICS 10, 109–119 (2014).
Jain, I., Inamdar, M. M. & Padinhateeri, R. Statistical mechanics provides novel insights into microtubule stability and mechanism of shrinkage. PLoS computational biology 11, e1004099 (2015).
We thank Ms Mandy Engelsma, Handfast Point, for the proofreading of the manuscript. We sincerely thank the FlowJo (http://www.flowjo.com/) software support team for their kind help in using their software. This work was supported by a CASIO grant (Japan), Konica Minolta (Japan), award to N. Hiroi. This work was supported by the Japan Society for the Promotion of Science (JSPS), Grant-in-Aid for Scientific Research (Kiban B) 24300112 and Grant-in-Aid for Challenging Exploratory Research (Chousenteki Houga) 26640132, award to A. Funahashi. The funders had no role in the study design, data collection and analysis, decision to publish, or preparation of the manuscript.
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Tanimoto, R., Hiraiwa, T., Nakai, Y. et al. Detection of Temperature Difference in Neuronal Cells. Sci Rep 6, 22071 (2016). https://doi.org/10.1038/srep22071
This article is cited by
Light: Science & Applications (2021)
Cell Biochemistry and Biophysics (2021)
Biophysical Reviews (2020)
Communications Biology (2019)
Temperature imaging using a cationic linear fluorescent polymeric thermometer and fluorescence lifetime imaging microscopy
Nature Protocols (2019)