Abstract
Noise is generally thought as detrimental for energy transport in coupled oscillator networks. However, it has been shown that for certain coherently evolving systems, the presence of noise can enhance, somehow unexpectedly, their transport efficiency; a phenomenon called environmentassisted quantum transport (ENAQT) or dephasingassisted transport. Here, we report on the experimental observation of such effect in a network of coupled electrical oscillators. We demonstrate that by introducing stochastic fluctuations in one of the couplings of the network, a relative enhancement in the energy transport efficiency of 22.5 ± 3.6% can be observed.
Introduction
Transport phenomena are ubiquitous throughout different fields of research. Some of the most common examples of transport analysis are seen in the fields of physics, chemistry and biology^{1}. In recent years, energy transport assisted by noise^{2,3,4} has attracted a great deal of attention, partly because of its potential role in the development of future artificial lightharvesting technologies^{5,6,7}. This intriguing phenomenon has theoretically been shown to occur in several quantum^{8,9,10,11,12,13,14} and classical^{15,16,17,18} systems; however, efforts towards its experimental observation had not been presented until very recently. Viciani et al.^{19} showed an enhancement in the energy transport of optical fiber cavity networks, where the effect of noise on the system was introduced by averaging the optical response of several network configurations with different cavityfrequency values. In a closely related experiment, Biggerstaff et al.^{20} demonstrated an increase in the transport efficiency of a laserwritten waveguide network, where decoherence effects were simulated by averaging the output signal of the waveguide array considering different illumination wavelengths. Using the same photonic platform, Caruso et al.^{21} observed an enhanced transport efficiency when suppressing interference effects in the transport dynamics of a photonic network. In this experiment, noise was implemented by dynamically modulating the propagation constants of the waveguides, which is the natural way for producing decohering noise, as it has been experimentally demonstrated in the context of quantum random walks^{22,23,24}.
In this work, we report on the observation of noiseassisted energy transport in a network of capacitively coupled RLC oscillators, where R stands for resistance, L for inductance and C for capacitance. Although in previous studies of ENAQT noise has been modeled as fluctuations in the frequency of each oscillator, socalled diagonal fluctuations^{2}, here we introduce noise in the system by means of stochastic fluctuations in one of the network’s capacitive couplings, referred to as offdiagonal dynamical disorder^{25}. Using this system, we show that fluctuations in the coupling can indeed influence the system so that the energy transferred to one of the oscillators is increased, demonstrating that offdiagonal dynamical disorder can effectively be used for enhancing the efficiency of energy transport systems.
Results
We consider a network of three identical RLC oscillators (as shown in Fig. 1), whose dynamics are described by
where V_{n} is the voltage in each oscillator, i_{n} is the current and C_{nm} represents the capacitive couplings.
Noise is introduced in the system by inducing random fluctuations in one of the capacitive couplings, so that
with C_{12} being the average capacitance of the coupling and ϕ(t) a Gaussian random variable with zero average, i.e. , where denotes stochastic averaging.
Previous studies of noiseassisted transport have shown that efficiency enhancement can be observed by measuring the energy that is irreversibly dissipated in one particular site of the network, the socalled sink or reaction center^{3,8,14,17}. Here, we take the resistance in Oscillator2 to be the sink and measure the relative energy that is dissipated through it by computing
where is the total energy dissipated by all the oscillators. Notice that Eq. (4) is equivalent to the efficiency measure that was derived in a previous work on noiseassisted transport in classical oscillator systems^{17}.
We have experimentally implemented the system described by Eqs. (1, 2, 3) using functional blocks synthesized with operational amplifiers and passive linear electrical components (see Methods and accompanying Supplementary Information). Our experimental setup was designed so that the frequencies of each oscillator were the same (v = 290.57 Hz), as well as the couplings between them (C_{nm} = 40 μF). Notwithstanding, based on our measurements, we found that the designed system was characterized by the following parameters: ν = 283.57 Hz, C_{12} = 39 μF, C_{13} = 41.7 μF and C_{23} = 39 μF. These variations in the parameters of the system result from the tolerances (around 5%) of all the electronic components used in the implementation of the circuit.
As described in the methods section, noise was introduced in one of the network’s capacitive couplings using a random signal provided by a function generator (Diligent Analog Discovery 410244PKIT). The electronic circuit was designed so the voltage of the noise signal, V_{s}, is directly map into Eq. (3), thus making the stochastic variable ϕ(t) fluctuate within the interval (−V_{s}, +V_{s}), with a 1 kHz frequency. Notice that the frequency of the noise signal is higher than the oscillators’ natural frequency, which guarantees a true dynamical variation of the capacitive coupling. Figure 2 shows some examples of the histograms of noise signals extracted directly from the function generator.
Using the configuration described above, we measured the energy dissipated through the resistor in Oscillator2 [Eq. (4)] as a function of the noise voltage introduced in the capacitive coupling. We can see from Fig. 3 that transport efficiency in Oscillator2 is enhanced as the noise voltage increases, a sign of noiseassisted energy transport^{17}. We obtained an enhancement of 22.50 ± 3.59% for a maximum noise voltage of 850 mV. It is important to remark that we cannot go beyond this value using the present configuration because, when introducing noise signals close to 1 volt (or more), the system becomes unstable due to the presence of negative capacitances in the coupling [see Eq. (3)]. However, as obtained in our numerical simulations, a higher efficiency may be reached by incorporating random fluctuations in the remaining couplings.
To verify that the observed enhancement was a consequence of energy rearrangement due to random fluctuations in the coupling and not because external energy was introduced in the electronic circuit, we measured the transport efficiency of all oscillators. We can see from the inset in Fig. 3 that transport efficiency of Oscillator2 is enhanced only because the energy dissipated through Oscillator1 becomes smaller. This clearly shows that the effect of noise is to create new pathways in the system through which energy can efficiently flow towards an specific site, generally referred to as sink or reaction center.
Discussion
The results presented here show that noiseassisted transport, an ubiquitous concept that may help us understand efficient energy transport in diverse classical and quantum systems, can be observed in simple electronic circuit networks. This opens fascinating routes towards new methods for enhancing the efficiency of different energy transport systems, from smallscale RF and microwave electronic circuits to longdistance highvoltage electrical lines. In this way, a specific feature initially conceived in a quantum scenario (environmentassisted quantum transport) has shown to apply as well in classical systems, widening thus the scope of possible quantuminspired technological applications.
Methods
In our experiment, three identical RLC electrical oscillators interact by means of three ideal capacitors. The input energy is injected into a single oscillator (Oscillator1) and we follow the dynamics of the system by registering independently the voltage of each oscillator (Fig. 1). Noise is introduced in the system by means of random fluctuations in one of the capacitive couplings, where the magnitude of the changes in the capacitance is defined by the noise voltage provided by an arbitrary function generator (Diligent Analog Discovery 410244P). Relative changes in the capacitance range from 0% (no voltage) to 100% (1 V) in a controllable way. To avoid instabilities, the 1KHzfrequency noise signal was varied from 0 to 850 mV, which corresponds to a range of the fluctuating capacitance going from C_{12} to .
The voltage of each oscillator contains the information about the stored energy in the system as well as the energy dissipated by each oscillator. A Tektronix MSO4034 oscilloscope (impedance 1MΩ) is used to measure these voltages. The voltage signals were extracted from the oscilloscope using a PCOSCILLOSCOPE interface, which transfers the information through a USB port. Because we are working with stochastic events, measurements were repeated up to 500 times for each noise voltage and averaged using a MatLab script. The initial input signal is a single pulse, with a pulse duration of 200 μs, injected in Oscillator1 using an Arbitrary Waveform Generator from Agilent 33220 A, with a 5 Hz frequency. The high level voltage amplitude is 5 V, while the lowlevel voltage amplitude is 0 V.
The synthesized transformation of the electronic circuit to an analog computer is described in the Supplementary Information. Basically, the analog computer makes analog simulations of differential equations using electronic components. The input and output voltages of an electronic circuit correspond to mathematical variables. These voltage variables are therefore representations of the physical variables used in the mathematical model.
An important issue that we would like to point out is that in this work both, the initial conditions and noise, are physically introduced via a voltage signal. This is particularly relevant because in the first case this voltage represents the initial current and, in the second case, the statistical distribution of the noise voltage can be defined independently from the circuit, thus it is not necessary to produce fluctuations in the physical properties of the electrical components–namely resistors, capacitors or inductors–which generally represents a major challenge^{26}.
Using the building blocks described in the Supplementary Information, it is possible to synthesize current variables and inductor elements with only resistors, capacitors and voltages. In our experiment, the components employed for the implementation of the corresponding building blocks include metal resistors (1% tolerance), polyester capacitors and generalpurpose operational amplifiers (MC1458). A DC power source (BK Precision 1761) was used to generate a ±12 V bias voltage for the operational amplifiers. The electronic components of each oscillator were mounted and soldered on a drilled phenolic board (7.5 × 4.5 cm) to avoid poor contacts.
Additional Information
How to cite this article: LeónMontiel, R. J. et al. Noiseassisted energy transport in electrical oscillator networks with offdiagonal dynamical disorder. Sci. Rep. 5, 17339; doi: 10.1038/srep17339 (2015).
References
Plawsky, J. L. Transport phenomena fundamentals (CRC Press, US, 2014).
Mohseni, M., Rebentrost, P., Lloyd, S. & AspuruGuzik, A. Environmentassisted quantum walks in photosynthetic energy transfer. J. Chem. Phys. 129, 174106 (2008).
Plenio, M. & Huelga, S. Dephasingassisted transport: quantum networks and biomolecules. New J. Phys. 10, 113019 (2008).
Caruso, F., Chin A. W., Datta A., Huelga S. F. & Plenio, M. B. Highly efficient energy excitation transfer in lightharvesting complexes: The fundamental role of noiseassisted transport. J. Chem. Phys. 131, 105106 (2009).
Ball, P. Physics of life: The dawn of quantum biology. Nature 474, 272 (2011).
Lambert, N. et al. Quantum biology. Nat. Phys. 9, 10 (2013).
Huelga, S. F. & Plenio, M. B. Vibrations, Quanta and Biology. Contemp. Phys. 54, 181 (2013).
Rebentrost, P., Mohseni, M., Kassal, I., Lloyd, S. & AspuruGuzik, A. Environmentassisted quantum transport. New J. Phys. 11, 033003 (2009).
Chin, A., Datta, A., Caruso, F., Huelga, S. & Plenio, M. Noiseassisted energy transfer in quantum networks and lightharvesting complexes. New J. Phys. 12, 065002 (2010).
Caruso, F., Spagnolo, N., Vitelli, C., Sciarrino, F. & Plenio, M. B. Simulation of noiseassisted transport via optical cavity networks Phys. Rev. A 83, 013811 (2011).
Mostame, S. et al. Quantum simulator of an open quantum system using superconducting qubits: exciton transport in photosynthetic complexes. New J. Phys. 14, 105013 (2012).
Shabani, A., Mohseni, M., Rabitz, H. & Lloyd, S. Efficient estimation of energy transfer efficiency in lightharvesting complexes. Phys. Rev. E 86, 011915 (2012).
Kassal, I. & AspuruGuzik, A. Environmentassisted quantum transport in ordered systems. New J. Phys. 14, 053041 (2012).
LeónMontiel, R. de J., Kassal, I. & Torres, J. P. Importance of excitation and trapping conditions in photosynthetic environmentassisted energy transport. J. Phys. Chem. B 118, 10588 (2014).
Kramer, B. & MacKinnon, A. Localization: Theory and experiment. Rep. Prog. Phys. 56, 1469 (1993).
Hänggi, P. & Marchesoni, F. Artificial Brownian motors: Controlling transport on the nanoscale. Rev. Mod. Phys. 81, 387 (2009).
LeónMontiel, R. de J. & Torres, J. P. Highly efficient noiseassisted energy transport in classical oscillator systems. Phys. Rev. Lett. 110, 218101 (2013).
Spiechowicz, J., Hänggi, P. & Luczka, J. Brownian motors in the microscale domain: Enhancement of efficiency by noise. Phys. Rev. E 90, 032104 (2014).
Viciani, S., Lima, M., Bellini, M. & Caruso, F. Observation of Noiseassisted transport in an alloptical cavitybased network. Phys. Rev. Lett. 115, 083601 (2015).
Biggerstaff, D. N. et al. Enhancing quantum transport in a photonic network using controllable decoherence. Arxiv:1504.06152v1 (2015).
Caruso, F., Crespi, A., Ciriolo, A. G., Sciarrino, F. & Osellame, R. Fast escape from quantum mazes in integrated photonics. Arxiv:1501.06438v1 (2015).
Broome, M. A. et al. Discrete singlephoton quantum walks with tunable decoherence. Phys Rev. Lett. 104, 153602 (2010).
Schreiber, A. et al. Decoherence and disorder in quantum walks: from ballistic spread to localization. Phys. Rev. Lett. 106, 180403 (2011).
Svozilík, J., LeónMontiel, R. de J. & Torres, J. P. Implementation of a spatial twodimensional quantum random walk with tunable decoherence. Phys. Rev. A 86, 052327 (2012).
Rudavskii, Y., Ponedilok, G. & Petriv, Y. Diagonal and offdiagonal types of disorder in condensed matter theory. Condensed Matter Physics 3, 807 (2000).
LeónMontiel, R. de J., Svozilík, J. & Torres, J. P. Generation of a tunable environment for electrical oscillator systems. Phys. Rev. E 90, 012108 (2014).
Acknowledgements
RJLM acknowledges postdoctoral financial support from the University of California Institute for Mexico and the United States (UC MEXUS). MAQJ acknowledges CONACyT for a PhD scholarship. RQT thanks DGAPAUNAM for financial support through grant IN111614. JLDJ thanks Catedras CONACYTUNAM. JPT acknowledges support from the Severo Ochoa program (Government of Spain), from the ICREA Academia program (ICREA, Generalitat de Catalunya) and from Fundacio Privada Cellex, Barcelona. JLA wishes to thank CONACYT and DGAPAUNAM for financial support through grants 167244 and IN106115, respectively.
Author information
Affiliations
Contributions
R.J.L.M., M.A.Q.J., R.Q.T., J.L.D.J., J.P.T. and J.L.A. conceived, designed and implemented the experimental setup. R.J.L.M. and H.M.M.C. provided the theoretical analysis. All authors contributed extensively to the planning, discussion and writing up of this work.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
LeónMontiel, R., QuirozJuárez, M., QuinteroTorres, R. et al. Noiseassisted energy transport in electrical oscillator networks with offdiagonal dynamical disorder. Sci Rep 5, 17339 (2015). https://doi.org/10.1038/srep17339
Received:
Accepted:
Published:
Further reading

Reconfigurable network for quantum transport simulations
Physical Review Research (2021)

Digital quantum simulation framework for energy transport in an open quantum system
New Journal of Physics (2020)

ErmakovLewis Invariant for Two Coupled Oscillators
Journal of Physics: Conference Series (2020)

Experimental realization of the classical Dicke model
Physical Review Research (2020)

Effects of disorder and interactions in environment assisted quantum transport
Physical Review Research (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.