Photodynamic therapy (PDT), wherein light sensitive non-toxic agents are locally and selectively activated using light, has emerged as an appealing alternative to traditional cancer chemotherapy. Yet to date, PDT efficacy has been mostly characterized using 2D cultures. Compared to 2D cultures, 3D sphere culture generates unique spatial distributions of nutrients and oxygen for the cells that better mimics the in-vivo conditions. Using a novel polyHEMA (non-adherent polymer) fabrication process, we developed a microfluidic sphere formation platform that can (1) generate 1,024 uniform (size variation <10%) cancer spheres within a 2 cm by 2 cm core area, (2) culture spheres for more than 2 weeks and (3) allow the retrieval of spheres. Using the presented platform, we have successfully characterized the different responses in 2D and 3D cell culture to PDT. Furthermore, we investigated the treatment resistance effect in cancer cells induced by tumor associated fibroblasts (CAF). Although the CAFs can enhance the resistance to traditional chemotherapy agents, no significant difference in PDT was observed. The preliminary results suggest that the PDT can be an attractive alternative cancer therapy, which is less affected by the therapeutic resistance induced by cancer associated cells.
Photodynamic therapy (PDT) is a treatment that generates local oxidative stress to kill cancer cells upon illumination of light. Due to the capability to selectively activating the cytotoxicity in the target tumor region, it is known to have less side effects than conventional chemo-therapies1,2. There are three key factors that need to be characterized for effective PDT: the photosensitizer (PS), oxygen and light1,2. During therapy, light is applied to activate the photosensitizer at a wavelength that corresponds to the photosensitizer’s maximum absorption. The excited photosensitizers transfer their energy to adjacent oxygen molecules to generate high energy oxygen molecules (singlet state oxygen) which in turn generate cytotoxic reactive oxygen species, causing the localized cytotoxicity3,4,5,6. As the efficacy of the PDT highly depends on these three elements, we previously developed an integrated microfluidic system that can comprehensively characterize and optimize PDT efficacy under different light, drug concentration and oxygen conditions7. Within a core chip size of 5 mm by 5 mm, more than 1,000 PDT conditions could be simultaneously screened7,8. Although extensive combinatorial PDT conditions could be tested in the previous approach, it can only perform assays for a monolayer of cells in 2D culture, which poorly reflects the complexity of in-vivo environment9,10,11,12. Due to the unorganized and rapid growth of tumors, blood vessels often do not adequately supply oxygen and nutrients to the tumor microenvironement. This creates regions of low nutrition, low glucose, low pH and low oxygen levels (hypoxia) within tumors. These conditions may boost drug resistance and induce mutation9,10. The conditions that prevent adequate supply of nutrients can also make it difficult for conventional drugs to permeate into these regions. As a result, the inability to eradicate the tumor cells in these regions of hypoxia can be a cause of tumor relapse. Thus, a good model that takes such factors into account is particularly important for drug screening in cancer. For PDT, which depends on photosensitizer concentrations and oxygen levels, it is critical to investigate the effect of drug efficacy in a 3D tumor environment. Compared to 2D monolayer cultures, 3D sphere culture better mimics drug and oxygen distribution in the tumor niche11,12.
There are a few approaches popular approaches to realize 3D sphere culture. Hanging drop method is one of the most popular approaches used for culture of 3D spheres13,14. One of the issues in the hanging drop approach is that cell culture environment is entirely exposed to the ambient environment, which may lead the evaporation of the media from the drops. The increase in osmolarity due to media concentration change is detrimental to cell viability; as a result, relatively large volumes (e.g. 10 μL) are used, limiting the minimum size of the drops14. Consequently, the number of hanging drops that can be deployed for a given area is relatively small. Moreover, media exchange is a challenge. Though some technical innovations have been implemented to facilitate media exchange15, it is generally necessary to manually pipette new media into each droplet individually, further limiting the number of spheres and their size scaling. There are other micro-fabricated approaches for large scale formation of spheres on open substrates, but it is difficult to identify and handle the formed spheres16,17,18,19. Forming spheres using micro-rotational flow or the magneto-Archimedes effect also has limitations in scalability20,21. Performing 3D culture in a hydrogel has been introduced, but the chemical and mechanical cues provided by the hydrogel can affect the behavior of spheres22,23,24.
Compared to these previous approaches, generating spheres within the enclosed microfluidic channels is attractive as evaporation is negligible and a smaller media volume (10–100 nL) can be used per sphere. Also, a single device inlet can supply media to all the enclosed microwells, facilitating simultaneous media exchange to all spheres by one pipetting operation. To create sphere culture environment in enclosed microchannels, surfactants (e.g. F-108), chemicals, or nano-structures were patterned into previous devices25,26,27,28,29,30,31,32. Although these methods can prevent cell adhesion for certain cell types, some highly adherent cells can still adhere on coated substrates, especially in the serum rich culture media which can contain many adhesion factors. Reliable non-adherent coatings are critical to avoid adhesion, which can alter the behavior of cells and prevent sphere formation. In this work, we present a microfluidic platform that allows for the high-throughput formation of cancer spheres on chip. 1,024 spheres can be reliably generated within the chip core area of 2 cm by 2 cm and the formed spheres can be successfully cultured for more than 2 weeks. Using this platform, assays were performed to compare the PDT efficacy between the conventional 2D monolayer culture and 3D sphere culture. For T47D (breast cancer) cells, the IF50 (half maximal inhibitory fluence (light energy J/cm2) for 3D spheres is by four times higher than that for 2D monolayer culture, verifying the enhancement of PDT resistance in spheres due to low photosensitizer permeation and low oxygen levels.
We also investigated the therapeutic resistance of tumor cells induced by supporting somatic cells. Fibroblasts are a major micro-environmental regulator in cancer and play an important role in tumorigenesis, drug resistance and metastasis33,34,35,36. Recently, it was reported that the co-culture of cancer cells and fibroblast can boost chemotherapeutic resistance35,36. However, as the previous 3D PDT work provide poor microenvironment control and low throughput37, whether or not the same effects are observed in PDT has not yet been fully explored. Here, we performed a simple experiment to observe whether fibroblast conditioned media (CM) can boost the resistance to PDT in cancer spheres. We used cisplatin (chemo-therapy drug) as a control because it shows a significant reduction in its efficacy when cells exposed to fibroblast CM, As compared with cisplatin, we found that the PDT efficacy was not affected by fibroblast CM, suggesting it is less affected by cancer associated cells.
High-throughput sphere formation
The presented high-throughput sphere formation platform is composed of an array of 1,024 non-adherent microwells connected by single inlet and outlet (Fig. 1). Spheres are formed by aggregation of cells in each microwell (400 μm in depth) after cell loading (Fig. 1). When cells are loaded into the channel, a portion of the cells will settle down into a microwell and the rest will flow into the rest of downstream microwells (Fig. 1(a)). As the number of cells that settle in a well depends on the size of micro-well, we can easily generate larger and smaller spheres for different applications by changing the diameter of microwells. In our study, we used two different microwell diameters, 250 μm and 450 μm, respectively. To facilitate sphere formation by cell aggregation, micro-wells were coated with polyHEMA. PolyHEMA is a biocompatible hydrogel that has been used as a non-adherent coating material for suspension cell culture successfully for more than 30 years38,39. As cells cannot adhere onto the polyHEMA-coated layer, they aggregate to form a sphere (Fig. 1(b)). Using the presented device (Fig. 1(c–e)), we can reliably generate 1,024 spheres at high throughput within 1 day.
PolyHEMA coating process
Our platform was fabricated by stacking two layers of PDMS. The first PDMS layer (substrate layer) has microfluidic channels and microwells coated with polyHEMA to avoid cell adhesion. The second PDMS layer (top layer) is an unpatterned cap (blank layer) for enclosure of the channel layer. These two PDMS layers (blank layer and substrate layer) were fabricated using standard soft lithography processes separately and then bonded after plasma oxygenation as shown in Fig. S1. For the substrate layer, two masks were used to form a SU8 (Microchem) master mold: the first mask for the microfluidic channels (100 μm in height) and the second mask for the microwells (400 μm in height). An unpatterned master was used to fabricate the blank layer. The fabricated substrate layer with both smaller (250 μm) and larger (450 μm) microwells are shown in Fig. 2 (a,b).
To make the microwells non-adherent, polyHEMA was filled in the suspension culture chambers using a stamping process developed in our lab from previous work40. The polyHEMA was dissolved in an ethanol solution (60 mg/mL in 95% ethanol) and applied on the substrate PDMS layer. A piece of blank PDMS was pressed on top to squeeze out any excess solution, leaving the polyHEMA only in the indented micro-wells. To improve the coating quality, the indented PDMS substrate was plasma treated to increase its hydrophilicity. Because polyHEMA has higher affinity to hydrophilic substrates, the treatment increases the polyHEMA adhesion to the patterned PDMS substrate while stamping. After that, the substrate layer and the blank PDMS stamp were put on a hot plate at 110 °C for 2 hours under pressure (~13 k Pa), in order to facilitate evaporation of ethanol through the PDMS. As ethanol evaporates from the solution, polyHEMA is condensed and coated onto the suspension cell-culture microwells. To remove any residual polyHEMA deposited outside the microwells, which can affect the bonding strength between two layers of PDMS, 30 seconds of 800 Watt plasma etching was performed using a YES polymer striper (the estimated etching depth of 0.3 μm). This process ensures clean PDMS surface with polyHEMA coated only on the suspension culture microwells.
Characterization of polyHEMA-coated surface
In order to verify successful polyHEMA microwell deposition, we examined the surface profile before and after polyHEMA coating. The surface was scanned using a laser interference microscope (LEXT, Olympus), as shown in Fig. 2 (c,d). Before polyHEMA coating, the vertical sidewall of the indented microwell was clearly visible. After polyHEMA filling, the slope of sidewall became smoother, indicating that polyHEMA was coated in the well. Based on the cross-sectional profile of microwells before and after polyHEMA coating (Fig. 2(e,f)), the coating depth at the center of the microwell is measured approximately 40 μm, which is sufficient to provide reliable a non-adherent culture surface. Additionally, the rounding of the substrate profile is beneficial as it promotes cell aggregation in the well.
To verify non-adherent culture in the microwells, T47D breast cancer cells were loaded and cultured on a polyHEMA-coated microwell array. We used an uncoated PDMS microwell array (400 μm deep) as a control. In the uncoated wells, the cells adhered not only inside the wells but also on the sidewall and outside of the wells (Fig. S2(a)). In contrast, we can clearly observed that cells do not adhered inside the wells in the polyHEMA patterned array. Cells were only able to adhere on the top surface outside the well where the polyHEMA was removed via stamping and plasma etching (Fig. S2(b)). Multiple cell lines including MCF-7 (breast cancer) and SUM159 (breast cancer) cells were tested on the substrate in addition to the T47D cells. Non-adherent culture was observed in all these cell lines, indicating that the polyHEMA coating process is robust and reliable.
Sphere formation assays
After characterization of the polyHEMA-coated substrate, we performed sphere formation experiments. To guarantee that a consistent number of cells are loaded into each microwell, we applied a high flow rate (300 μL per minute) at a high concentration (5 × 106 cells per mL) of T47D cells during cell loading31. As only a small portion (~5%) of loaded cells settled down in the wells, similar numbers of cells were present in the upstream as well as downstream microwells. Thus, there is no significant difference in the number of settled cells per well between the upstream and downstream (Fig. S3). Right after cell loading, cells were uniformly distributed inside each microwell as shown in the Fig. 3(b). The loaded cells aggregate into spheres at the center due to non-adherent coating of polyHEMA and rounded substrate profile. After 3 hours, we could clearly observe preliminary cell aggregation (Fig. 3 (c)). As time goes by, the aggregation became tighter and tighter (Fig. 3(d–f)) and compact spheres were observed after one day of culture. After culturing for 2 days, we peeled off the top PDMS layer to retrieve the spheres. The process did not damage the spheres and we could successfully collect the spheres for other downstream analyses (Fig. S4). A retrieved sphere is shown under SEM (Fig. 3 (h)). Additionally, we demonstrated long term sphere culture for more than 2 weeks using T47D cells (Fig. S5).
Using the same process, we also formed spheres from MCF-7 and SUM159 breast cancer cells (Fig. 3 (i,j)), demonstrating that the presented platform can culture various cell lines reliably. In addition, sphere size can be controlled by modifying the size of the microwell without changing the protocol. This is because more cells settled in a larger well than a smaller one (Fig. S6). The sphere formation process in a small well (250 μm in diameter) is shown in Fig. 3 (k,l). Figure 3 (m) shows an array of fluorescently labelled (Cell Tracker, C2527, Life Technology) spheres formed in the platform and the enlarged view of a fluorescently labelled sphere is shown in the Fig. 3 (n). Since the standard deviation of loaded cells is less than 10% of the average number of loaded cells in each microwell (Fig. 3 (o)), we can achieve uniform sphere formation throughout the whole array (Fig. 3 (p)).
Difference in PDT efficacy between 2D and 3D cell cultures
After characterization of sphere formation in the platform, we performed photodynamic therapy (PDT), comparing conventional 2D mono-layer cell cultures and 3D cell spheres. Based on our previous work7, we chose to use a 10 μM methylene blue (photosensitizer) solution and ambient oxygen level (20%) for treatment of T47D cells. After incubation with the drug for 1 hour, 2D and 3D cultures were illuminated with various exposure doses, from 14 seconds (0.1 J/cm2) to 1 hour (total 43.8 J/cm2), for the activation of photosensitizers. Right after exposure, we performed LIVE/DEAD staining to evaluate cell viability. Figure 4 shows the distinct difference between the 2D and 3D PDT responses. Under an exposure of 7.3 J/cm2, around 50% of the cells were killed in the 2D cell monolayer (Fig. 4 (b)), while at the same dose, most of the cells were viable in the 3D spheres (Fig. 4(f)). When the illuminating exposure is 21.9 J/cm2, almost all the cells in the 2D monolayer were killed (Fig. 4(c)), but many cells in the sphere were still viable (Fig. 4(g)). Even when the light exposure is as high as 43.8 J/cm2, still a portion of cells at the center of spheres were shown to be viable (Fig. 4(h)). As expected, the size of sphere also affects the efficacy of the PDT. Larger spheres (Fig. 4 (e–h)) are more resistant than the small spheres (Fig. 4(i–l)) under the same PDT treatment conditions. The cell viabilities vs. light exposure (fluence) under the different conditions are plotted in Fig. 4 (m,n). To quantify the efficacy of PDT, IF50 (half maximal inhibitory fluence) was defined as the counterpart of IC50. From these plots, the IF50 of the 2D monolayer is estimated to be 4.9 J/cm2, while the IF50 of small and large spheres are estimated to be 9.4 J/cm2 and 17.8 J/cm2, respectively. The results clearly show the enhancement of PDT resistance in sphere culture.
Drug resistance enhancement effect caused by fibroblast condition media
This robust, high throughput sphere formation device is useful in a variety of other screens. It has been reported that co-culture of cancer cells and fibroblasts can boost drug resistance of the cancer cells to conventional chemotherapies35,36. This implies that it would be more difficult to treat cancer cells in the in-vivo cancer niche as compared to in-vitro culture. However, it has not been studied whether the efficacy of PDT on cancer cells would be degraded by the influence of fibroblast. In this work, we used the media conditioned by the secretion from cancer associated fibroblast to mimic the influence of fibroblast cells in the cancer niche. In Fig. 5 (a) and Fig. S7 it was confirmed that cisplatin treatment (a conventional chemotherapy) of T47D cells becomes less effective when cultured in fibroblast conditioned media (CM). The cells cultured in the normal serum-containing media have an IC50 of 23.5 μM, while the cells cultured in CM have an IC50 of 67.5 μM, verifying the effect of fibroblast induced drug resistance41,42,43. Under the same culture conditions, PDT was evaluated. We observed no significant increase in PDT resistance when comparing CM to normal culture media (2D culture in Figs 5 (b) and 3D culture in Fig. 5 (c), respectively), indicating that fibroblast mediated resistance does not boost resistance to PDT.
3D sphere cell culture has emerged as a better model for drug screening, as 2D monolayer cell culture does not adequately mimic in-vivo environments. However, the formation and handling of 3D cell spheres is less reliable in current platforms and 3D culture techniques have not yet been widely adopted11,12. The hanging drop method, one of mostly used approaches, has drawbacks in scaling down droplet sizes for high-throughput and difficulty in media exchange during culture. Our presented platform has overcome these drawbacks by realizing non-adherent sphere formation inside enclosed microfluidic channels. Selective polyHEMA coating in each microwell facilitates reliable aggregation of loaded cells for sphere formation within 24 hours. In our 3D culture platform, we have achieved: (1) reliable formation of cancer spheres, (2) high sphere formation yield (over 95%), (3) uniform sphere size (size variation less than 10%), (4) capability to culture spheres for more than 2 weeks and (5) capability to retrieve spheres from the device for further analyses. Thus, the presented platform is useful for high-throughput therapeutic screening on 3D cell spheres.
Using our platform, we can easily investigate the difference in PDT efficacy between 2D cell cultures and 3D cell spheres. We applied the selective coating of polyHEMA for 3D sphere culture while using the uncoated devices for 2D adherent culture as controls. In 2D monolayer cell culture, all cells are exposed to a uniform photosensitizer dosage and same oxygen level. However in 3D spheres, photosensitizer and oxygen need to diffuse into the center, decreasing photosensitizer and oxygen levels in the middle of spheres. As PDT relies on excitation of available photosensitizer concentrations and reactive oxygen species, the depletion of photosensitizer and oxygen at the center of the sphere can degrade the efficacy of PDT3,4,5,6,7. In addition, the cells at the center are supported by more surrounding cells and these interactions can enhance the cell survival44,45. In literature, it was reported that the necrosis can happen at the center of sphere due to the lack of nutrition and oxygen11,12. However, because of the small sphere size we made and short culture time, we did not observe this phenomenon. We could clearly observe a higher survival rate at the center of spheres. Even after 60 minutes of light exposure, which completely killed cells in the 2D cultures, some cells at the center of the spheres were still viable. Overall, the IF50 of 3D spheres is by four times higher than that of 2D cultures. This apparent difference in drug response between 2D and 3D cell cultures highlights the importance of the 3D sphere models for more closely mimicking cancer niche behavior during pre-clinical drug screening.
The interaction between cancer cells and surrounding support cells also plays a critical role in influencing niche behavior. It is believed that cancer cells influence the micro-environment and exploit support cells to assist tumorigenesis, metastasis and drug resistance33,34,35,36. This deteriorates effectiveness and makes the efficacy of cancer treatment in-vivo very unpredictable. Among many different types of supporting cells, we focused on cancer associated fibroblast cells33. In order to investigate their effect on drug and PDT efficacy, we used the conditioned media from the cancer associated fibroblast cells. These cells were harvested from a mouse xenograft and interacted with tumor cells for four weeks in-vivo. As expected, the conditioned media boosted cisplatin drug resistance in the treated cancer cells. The IC50 of the cells cultured in CM is almost three times higher than that of the cells cultured in the normal media. In contrast, we did not observe any significant difference in PDT under CM conditions. For both 2D and 3D cultures, the efficacy of PDT was not affected by the fibroblast CM. This may be due to the result of different mechanisms of cytotoxicity between chemo drugs (cisplatin) and PDT. For cisplatin, the primary mechanism relies on damaging the DNA to induce apoptosis41. However, cells may evade this mechanism by up-regulating DNA repair mechanisms and inhibiting apoptotic pathways. The cancer associated fibroblast cells influence cancer cells by enhancing these drug resistance mechanisms35,36. In comparison, the damage caused by PDT is far more diversified. The excited photosensitizers can react with oxygen to generate highly reactive radicals, which initiate the radical chain reactions damaging DNA, mitochondria and lysosomes and causing the depolarization of cell membranes3,4,5,6. This results in necrotic cell death rather than apoptosis. These wide spread damages cannot be easily mitigated by up-regulation of certain pathways and this may explain the reason why we did not observe distinct resistance to PDT under the fibroblast conditioned media culture. Fortunately, it is likely that the PDT will kill both cancer cells and the tumor associated support cells in-vivo during therapy. As such, PDT can be an attractive alternative to conventional chemo-therapies.
T47D (breast cancer), SUM-159 (breast cancer) and MCF-7 (breast cancer) cells were obtained from Dr. Max Wicha’s lab (University of Michigan, MI, USA). T47D cells (breast cancer) were cultured in RPMI (Gibco 11875) with 10% FBS (Gibco 10082) and 1% penicillin/streptomycin (Gibco 15140). SUM159 and MCF-7 cells were cultured in DMEM (Gibco 11965) with 10% FBS (Gibco 10082) and 1% penicillin/streptomycin (Gibco 15140).
Harvest cancer associated fibroblast cells and prepare fibroblast conditioned media
The primary fibroblast cells were obtained from Dr. Max Wicha’s lab. First, primary tumor tissue was obtained from mouse xenografts and then minced into fine pieces using two scalpels. The minced tissue was transferred into a 50 mL conical tube, where Collagenase in a 1:1 ratio was added. The tissue was then gently dissociated on a rotary shaker (200 RPM) for 30–60 minutes or until all larger tissue fragments were digested. After dissociation, the tube was centrifuged at 40 x g for 2 minutes. Then, the supernatant was pipetted carefully into a new 50 mL conical tube. The fibroblasts were spun down at 250 x g for 5 minutes. After spinning down, the pellet was washed with HBSS and spun down again using 250 x g for 5 minutes. After centrifugation, the pellet was re-suspended in fibroblast media and plated in a cell culture flask. The media will be changed after 1.5 hours. The collected cancer associated fibroblasts were expanded in fibroblast media in an incubator at 37 °C and 5% CO2. To obtain fibroblast condition media, 106 cancer associated fibroblasts were first cultured in a 60 mm diameter dish. After two days, the dish was washed by 2 mL PBS three times and then 2mL of fresh media was added to the dish. After 48 hours, the supernatant was retrieved and centrifuged at 300 x g for 10 minutes to remove any cell debris.
Cell loading for sphere formation
Before cell loading the device was pre-treated with 1% (w/v) Pluronic F108 solution to prevent nonspecific adhesion of the cells to the PDMS sidewalls while loading. For 2D cell monolayer culture, collagen (Collagen Type 1, 354236, BD Biosciences) was coated in the microwell to improve cell adhesion on the PDMS layer. After the devices were prepared, cells were harvested from culture plates with 0.05% Trypsin/EDTA (Gibco 25200) and then centrifuged at 1,000 rpm for 5 min. To improve image quality, cells can be stained with red fluorescent (Invitrogen, Cell tracker C2927) or green fluorescent (Invitrogen, Cell tracker Green C2925) dye before loading. The cells were then re-suspended in culture media to a concentration of 5 × 106 cells/ml. 300 μL of this cell solution was flowed through the device within one minute and then the cell solution in the inlet was replaced with fresh cell culture media.
One day after the cell loading, the cells adhered (for 2D) or aggregated (for 3D) in each microwell. For PDT assays, 200 μL of PBS was added into the inlet to wash the media from the device for 10 minutes. Then, 200 μL of 10 μM methylene blue (319112, Sigma-Aldrich) in PBS was pipetted into the inlet. The device was incubated for one hour with the methylene blue solution. Then, PBS was perfused for 10 minutes to wash away the methylene blue solution. The device was then placed in a 100 mm diameter dish to prevent media evaporation and was exposed under a red LED light source (Philips Lumileds LUXEON® Z Red (LXZ1-PD01) LED, peak emission 627nm, intensity 0.73 J/cm2/min Fig. S8). Although PDMS absorbs ~10–20% of light intensity, the attenuation is identical in both 2D and 3D PDT devices. After the light exposure, LIVE/DEAD staining (L3224, Life Technologies) was performed to assess cell viability. Calcein AM (green/Life) was diluted to 2 μM in PBS and Ethidium homodimer-1 (red/dead) was diluted to 2 μM in PBS. The cell viability of 2D cultures was measured by counting red/green cells under fluorescent microscope and the cell viability of 3D spheres was measured by counting red/green cells in the focal planes of every 20 μm. Three experiments were performed in independent devices for each data point. The methylene blue alone, light alone and sham controls data are listed in the Table S1.
Cisplatin drug treatment
After 1 day of culture, 200 μL of PBS was added into the inlet to wash away the media in the device for 10 minutes. Then, the 200 μL of cisplatin (various concentrations) in culture media was pipetted into the inlet. The media was changed daily with a fresh solution of the drug. After 3 days of treatment, LIVE/DEAD staining (L3224, Life Technologies) was performed to assess cell viability. Calcein AM (green/Life) was diluted to 2 μM in PBS and Ethidium homodimer-1 (red/dead) was diluted to 2 μM in PBS. The cell viability of 2D cultures was measured by counting red/green cells under fluorescent microscope.
Fibroblast conditioned media experiments
For the experiments testing the effect of fibroblast conditioned media, the conditioned media was used to replace culture media right after cell loading. For the cisplatin drug treatment experiments, the cisplatin was diluted in the conditioned media for the entire 3 day treatment.
One way ANOVA (SPSS) tests were used for all comparisons with a significance level of 0.05, considered statistically significant. Results are presented as mean ± SD.
How to cite this article: Chen, Y.-C. et al. High-Throughput Cancer Cell Sphere Formation for Characterizing the Efficacy of Photo Dynamic Therapy in 3D Cell Cultures. Sci. Rep. 5, 12175; doi: 10.1038/srep12175 (2015).
Moan, J. & Peng, Q. An outline of the hundred-year history of PDT. Anticancer Res. 23, 3591–3600 (2002).
Patrice, T. (Ed.) . Photodynamic therapy (Vol. 2). Royal Society of Chemistry (2003).
Luksiene, Z. Photodynamic therapy: mechanism of action and ways to improve the efficiency of treatment. Medicina (Kaunas), 39, 1137–1150 (2002).
Nowis, D. et al. Direct tumor damage mechanisms of photodynamic therapy. Acta Biochim. Pol. 52, 339 (2005).
Dolmans, D. E., Fukumura, D. & Jain, R. K. Photodynamic therapy for cancer. Nat. Rev. Cancer 3, 380–387 (2003).
Robertson, C. A., Evans, D. H. & Abrahamse, H. Photodynamic therapy (PDT): a short review on cellular mechanisms and cancer research applications for PDT. J. Photochem. Photobio., B 96, 1–8 (2009).
Lou, X. et al. A high-throughput photodynamic therapy screening platform with on-chip control of multiple microenvironmental factors. Lab Chip 14, 892–901 (2014).
Yoon, H. K. et al. Nanophotosensitizers Engineered to Generate a Tunable Mix of Reactive Oxygen Species, for Optimizing Photodynamic Therapy, Using a Microfluidic Device. Chem. Mater. 26, 1592–1600 (2014).
Lin, R. Z. & Chang, H. Y. Recent advances in three‐dimensional multicellular spheroid culture for biomedical research. Biotechnol J. 3, 1172–1184 (2008).
Li, C. L. et al. Survival advantages of multicellular spheroids vs. monolayers of HepG2 cells in vitro. Oncol Rep. 20, 1465–1471 (2008).
Neuži, P., Giselbrecht, S., Länge, K., Huang, T. J. & Manz, A. Revisiting lab-on-a-chip technology for drug discovery. Nat. Rev. Drug Discov. 11, 620–632 (2012).
Breslin, S. & O’Driscoll, L. Three-dimensional cell culture: the missing link in drug discovery. Drug Discov. Today 18, 240–249 (2013).
Torisawa, Y. S. et al. A multicellular spheroid array to realize spheroid formation, culture and viability assay on a chip. Biomaterials 28, 559–566 (2007).
Tung, Y. C. et al. High-throughput 3D spheroid culture and drug testing using a 384 hanging drop array. Analyst 136, 473–478 (2011).
Hsiao, A. Y. et al. Micro-ring structures stabilize microdroplets to enable long term spheroid culture in 384 hanging drop array plates. Biomed. Microdevices 14, 313–323 (2012).
Sakai, Y. & Nakazawa, K. Technique for the control of spheroid diameter using microfabricated chips. Acta biomater. 3, 1033–1040 (2007).
Ungrin, M. D., Joshi, C., Nica, A., Bauwens, C. & Zandstra, P. W. Reproducible, ultra high-throughput formation of multicellular organization from single cell suspension-derived human embryonic stem cell aggregates. PloS One 3, e1565 (2008).
Lee, W. G., Ortmann, D., Hancock, M. J., Bae, H. & Khademhosseini, A. A hollow sphere soft lithography approach for long-term hanging drop methods. Tissue Eng. Part C: Methods 16, 249–259 (2009).
Tekin, H. et al. A. Stimuli-responsive microwells for formation and retrieval of cell aggregates. Lab Chip 10, 2411–2418 (2010).
Ota, H. et al. Three-dimensional spheroid-forming lab-on-a-chip using micro-rotational flow. Sens. Actuators B 147, 359–365 (2010).
Akiyama, Y. & Morishima, K. Label-free cell aggregate formation based on the magneto-Archimedes effect. Appl. Phys. Lett. 98, 163702 (2011).
Agarwal, P. et al. One-step microfluidic generation of pre-hatching embryo-like core–shell microcapsules for miniaturized 3D culture of pluripotent stem cells. Lab Chip 13, 4525–4533 (2013).
Lan, S. F. & Starly, B. Alginate based 3D hydrogels as an in vitro co-culture model platform for the toxicity screening of new chemical entities. Toxicol. Appl. Pharmacol. 256, 62–72 (2011).
Chan, H. F. et al. Rapid formation of multicellular spheroids in double-emulsion droplets with controllable microenvironment. Sci. Rep. 3, 3462 (2013).
Wu, L. Y., Di Carlo, D. & Lee, L. P. Microfluidic self-assembly of tumor spheroids for anticancer drug discovery. Biomed. Microdevices 10, 197–202 (2008).
Toh, Y. C. et al. A novel 3D mammalian cell perfusion-culture system in microfluidic channels. Lab Chip. 7, 302–309 (2007).
Torisawa, Y. S. et al. Efficient formation of uniform-sized embryoid bodies using a compartmentalized microchannel device. Lab Chip 7, 770–776 (2007).
Hsiao, A. Y. et al. Microfluidic system for formation of PC-3 prostate cancer co-culture spheroids. Biomaterials 30, 3020–3027 (2009).
Lee, K. et al. Gravity-oriented microfluidic device for uniform and massive cell spheroid formation. Biomicrofluidics 6, 014114 (2012).
Kuo, C. T., Chiang, C. L., Huang, R. Y. J., Lee, H. & Wo, A. M. Configurable 2D and 3D spheroid tissue cultures on bioengineered surfaces with acquisition of epithelial–mesenchymal transition characteristics. NPG Asia Materials. 4, e27 (2012).
Patra, B. et al. A microfluidic device for uniform-sized cell spheroids formation, culture, harvesting and flow cytometry analysis. Biomicrofluidics 7, 054114 (2013).
Lou, X., Yoon, H. K., Chen, Y. C., Kopelman, R. & Yoon, E. Characterization of nano-photosensitizer delivery and photodynamic efficacy using multicellular tumor spheroids (MCTS). International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS ΄14), 178–180, Aan Antonio, Oct., 2014.
Kalluri, R. & Zeisberg, M. Fibroblasts in cancer. Nat. Rev. Cancer 6, 392–401 (2006).
Liu, D. & Hornsby, P. J. Senescent human fibroblasts increase the early growth of xenograft tumors via matrix metalloproteinase secretion. Cancer Res. 67, 3117–3126 (2007).
Loeffler, M., Krüger, J. A., Niethammer, A. G. & Reisfeld, R. A. Targeting tumor-associated fibroblasts improves cancer chemotherapy by increasing intratumoral drug uptake. J. Clin. Invest. 116, 1955–1962 (2006).
Holohan, C., Van Schaeybroeck, S., Longley, D. B. & Johnston, P. G. Cancer drug resistance: an evolving paradigm. Nat. Rev. Cancer 13, 714–726 (2013).
Yang, Y. et al. Evaluation of photodynamic therapy efficiency using an in vitro three-dimensional microfluidic breast cancer tissue model. Lab Chip. 15, 735–44 (2015).
Re, F. et al. Inhibition of anchorage-dependent cell spreading triggers apoptosis in cultured human endothelial cells. The J. Cell Biol. 127, 537–546 (1994).
Chen, Y. C., Ingram, P., Lou, X. & Yoon, E. Single Cell Suspension Culture Using PolyHEMA Coating for Anoikis Assay and Sphere Formation. In The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS ΄12), 1241–1244, Okinawa, Oct. 2012.
Ingram, P. N., Chen, Y. C. & Yoon, E. PolyHEMA soft lithography for selective cell seeding, migration blocking and high-throughput suspension cell culture. International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS ΄13), 1451–1453, Freiburg, Oct. 2013.
Siddik, Z. H. Cisplatin: mode of cytotoxic action and molecular basis of resistance. Oncogene 22, 7265–7279 (2003).
Kim, M. & Ma, E. Synthesis of 2-and 7-Substituted C19 Steroids Having a 1, 4, 6-Triene or 1, 4-Diene Structure and Their Cytotoxic Effects on T47D and MDA-MB231 Breast Cancer Cells. Molecules 15, 4408–4422 (2010).
Chow, K. et al. A gold (III) porphyrin complex with antitumor properties targets the Wnt/β-catenin pathway. Cancer Res. 70, 329–337 (2010).
Kobayashi, H. et al. Acquired multicellular-mediated resistance to alkylating agents in cancer. Proc. Natl. Acad. Sci. 90, 3294–3298 (1993).
Day, M. L. et al. E-cadherin mediates aggregation-dependent survival of prostate and mammary epithelial cells through the retinoblastoma cell cycle control pathway. J. Biol. Chem. 274, 9656–9664 (1999).
This work was supported in part by the Department of Defense (W81XWH-12-1-0325) and in part by the National Institute of Health (1R21CA17585701). The Lurie Nanofabrication Facility of the University of Michigan (Ann Arbor, MI) is greatly appreciated for device fabrication. The LED light source was made by the Dr. Raoul Kopelman’s group, the CAF cells were provided by the Dr. Max Wicha’s group and the cisplatin was provided by Dr. Ronald Buckanovich’s group.
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Chen, Y., Lou, X., Zhang, Z. et al. High-Throughput Cancer Cell Sphere Formation for Characterizing the Efficacy of Photo Dynamic Therapy in 3D Cell Cultures. Sci Rep 5, 12175 (2015). https://doi.org/10.1038/srep12175
Three‐dimensional in vitro cell culture devices using patient‐derived cells for high‐throughput screening of drug combinations
MEDICAL DEVICES & SENSORS (2020)
A simple microsphere‐based mold to rapidly fabricate microwell arrays for multisize 3D tumor culture
Biotechnology and Bioengineering (2020)
Micropocket hydrogel devices for all-in-one formation, assembly, and analysis of aggregate-based tissues
Materials Technology (2019)
Spontaneous formation of tumor spheroid on a hydrophilic filter paper for cancer stem cell enrichment
Colloids and Surfaces B: Biointerfaces (2019)