Lipid bilayer membranes are among the most ubiquitous structures in the living world, with intricate structural features and a multitude of biological functions. It is attractive to recreate these structures in the laboratory, as this allows mimicking and studying the properties of biomembranes and their constituents and to specifically exploit the intrinsic two-dimensional fluidity. Even though diverse strategies for membrane fabrication have been reported, the development of related applications and technologies has been hindered by the unavailability of both versatile and simple methods. Here we report a rapid prototyping technology for two-dimensional fluidic devices, based on in-situ generated circuits of phospholipid films. In this “lab on a molecularly thin membrane”, various chemical and physical operations, such as writing, erasing, functionalization and molecular transport, can be applied to user-defined regions of a membrane circuit. This concept is an enabling technology for research on molecular membranes and their technological use.
Supported molecular phospholipid films are versatile model membrane architectures1, which are valuable to mimic fundamental properties and features of the plasma membrane at reduced complexity2,3,4. Double bilayer5,6, single bilayer7,8,9,10,11,12 as well as monolayer films13 can be formed on solid supports, providing enhanced stability and improved accessibility by probing techniques14. Supported membranes can cover an extensive area homogenously, which greatly facilitates modification, observation and imaging1. Two-dimensionality and fluidity allow their utilization in micro-15,16,17,18 and nanofluidic devices19, which supports functional studies of membrane proteins20,21 and promotes the development of membrane-based chemistry22, sensing23,24 and separation15. Here we introduce a microfluidic toolbox to write 2D nanofluidic networks composed of supported phospholipid membranes and dynamically modify their connectivity, composition and local function. We demonstrate how such networks are conveniently generated and locally restructured and show how various design possibilities such as diffusional barriers and hydrodynamic trapping points can be used in a “lab on a biomembrane” to directly address biomembrane functions and properties, or to perform membrane-assisted studies of molecular interactions. Our open volume approach is fundamentally different from the miniaturized technologies currently used to assemble artificial bilayer systems18. Microfluidic devices that operate in the “open space”, i.e., outside the confinement imposed by channels and chambers, provide unique opportunities for interacting with biological samples.
Using a hydrodynamically confined flow device (a multifunctional pipette25) for dispensing suspensions of small unilamellar vesicles (SUVs, 25–50 nm in diameter) in close proximity to a planar surface, we assemble a molecular film locally by means of vesicle adhesion and subsequent fusion. Hydrodynamic flow confinement limits the exposed area on the surface to 50–100 μm in diameter and rapid switching between different vesicle types and auxiliary solutions allows dynamic spatiotemporal control over film composition. Figure 1 presents the four main components of the toolbox: Writing (Fig. 1a–b), Dynamic control of composition (Fig. 1c–d), Erasing (Fig. 1e) and Localized lipid film modification and decoration (Fig. 1f–g). 2D-networks are directly written by providing liposomes through the pipette, while simultaneously translating the substrate by means of a motorized stage. The maximal writing speed is generally restricted by the kinetics of film formation. Diffusively continuous fluidic networks can be produced in this way, where the topology is defined by the x, y scanning sequence and the composition depends on the lipids supplied by the pipette. The device allows multiplexing between several different lipid (e.g. SUV) types. The formation mechanism of supported lipid bilayers from small vesicles, which is schematically depicted in Fig. 1b, has been elucidated previously26,27. Vesicles adhere to the surface, rupture and eventually transform into a continuous bilayer. Vesicle rupture occurs either immediately upon contact with the substrate or, alternatively, after a critical concentration of surface adhered vesicles is reached. The bilayer composition can be dynamically altered during the writing process (Fig. 1c, d), owing to the on-chip multiplexing capability. A writing protocol defines lipid type and order of administration, as well as writing time and stage position. Brief exposure bursts sequentially co-deposit vesicles prepared from different lipids in a pulse width modulation (PWM) like manner28 (Fig. 1d), where the final composition is determined by sequence and length of the individual bursts. Since the networks are diffusively connected, the compositional diversity will be lost over time. In order to preserve the composition of a particular membrane lane, it can be temporarily or permanently cut off by means of an “eraser” tool (Fig. 1e). Hydrodynamically confined flow of a detergent solution (e.g. Triton X) from the pipette is used to locally dissolve and thus remove a part of the previously written lipid film. The eraser restores the surface, which can be overwritten with a new lipid layer at a later time. In addition to creating and removing lipid material, lanes and patches can be modified by exposure to various reagents (Fig. 1f–g).
Figure 2a–h depicts the lipid film deposition. Depending on the lipid used, we observed two different regimes of adding lipid material to the forming film: non-spreading and spreading deposition. Non-spreading deposition occurs when lipid vesicles adhere to the exposed surface, rupture and fuse into a continuous lipid film29 (Fig. 2a). Deposition ceases upon full coverage and the formed membrane does not grow beyond the exposed surface region. This means that overwriting of patches in the non-spreading regime is not possible. We demonstrate non-spreading deposition by using SUVs composed of 1-Palmitoyl-2-oleoylphosphatidylcholine (POPC) in Fig. 2b–c and supplementary figure S4. The size of the generated membrane patch is largely time independent (Fig. 2d). In contrast, spreading deposition involves fusion of vesicles to an existing, previously assembled film27 (Fig. 2e) and the deposited membrane expands by surface spreading as long as new vesicles are supplied. Spreading deposition is achieved by using SUVs composed of L-α-phosphatidylcholine (Soy) and the cationic transfection lipid 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) (1:1 mixture, Fig. 2 f–g). Here, the radius of the membrane patch increases continuously over time for at least 600 seconds (Fig. 2h). In Fig. 2i–k we demonstrate how to change the composition of the patches dynamically during deposition (Fig. 2i). By means of the solution switching function of the pipette, two POPC vesicle suspensions, each carrying a different fluorescent label, were consecutively dispensed. In Fig. 2j, a series of 11 patches was deposited from the binary source, with the PWM ratio, i.e., composition, changing in steps of 10%. In Fig. 2k the observed fluorescence intensity of the two labels is displayed for each patch. The spreading regime of deposition can be utilized to insert membrane material into an existing patch (Fig. 2l–o). Vesicle fusion merges the supplied SUVs with a previously written membrane, first displacing the original membrane, followed by spreading and diffusional mixing (Fig. 2l). We wrote a POPC membrane patch and subsequently exposed the center of the patch to DOTAP vesicles. Initially, the DOTAP vesicles displaced the POPC entirely from the surface, as is evident from the complete extinction of their fluorescence emission and a slight increase of the intensity in the remaining patch. After 15 min, diffusive mixing and spreading have transformed the patch and spreading has caused the area to increase by ~15% (Fig. 2m–o). In order to write extended two-dimensional lipid membrane structures, the deposition is combined with translation of the substrate to generate lanes. Lane writing protocols (denoted P1, P2…) for each experiment are listed in the Supplementary section S6. In Fig. 3 we demonstrate the application of the writing tool to create loops (Fig. 3a), linear arrays (Fig. 3b) and networks (Fig. 3c), consisting of one or two different lipid components. The network displayed in Fig. 3c consists of POPC with two different fluorescent labels (POPC-488, POPC-655), written sequentially from two lipid sources. It is cohesive, i.e., diffusively fully connected. Fig. 3d–e demonstrates this connectivity on a pair of overlapping lanes, which diffuse into each other within ~14 minutes. The progression of the diffusion is quantified in Fig. 3e. For comparison, Fig. 3f shows the same analysis for an incohesive film. The writing operation in combination with solution exchange was then used to create a compositional gradient along a lane of ~600 μm length (Fig. 3g). The position dependent fluorescence emission depicted in Fig. 3h gives a good estimation of the film composition, but is distorted due to apparent energy transfer between the two fluorescent labels.
The writing of lipid films is irreversible, since the transition from membrane to vesicles is energetically unfavorable and lipid loss from a bilayer film is negligible. However, by applying a detergent to the membrane locally, it can be dissolved and permanently removed from the exposed region. Fig. 3i shows two labeled POPC lanes, which are cut perpendicularly by Triton-X exposure. In Fig. 3j the erasing has proceeded through the upper lane. The cutting edges appear sharp, only the corners of the remaining membrane are slightly deformed. After erasing, the surface appears clean and is available for re-writing. Fig. 3k is a snapshot obtained during deposition of POPC with an alternate label (green color) directly into the gap in the lower lane. After completed re-writing, the gap is repaired by a cohesive lipid film, indicated by the diffusion of the original label (red color) into the gap region (Fig. 3l).
We here demonstrate how the writing methodology is applied to already deposited membrane lanes and networks and describe a series of experiments involving biotin antibody recognition30 as an example for multistep functionalization (Fig. 4a). POPC vesicles were modified to contain 1% biotin-lipid conjugate and utilized to write a 100 μm composite membrane lane, one half of its area fluorescently labeled. The central part of the lane was then decorated with IgG goat anti biotin antibodies (primary). After 4 minutes, which allows the antibody patch to diffusively broaden, donkey anti goat antibodies (secondary) were written over exactly the same area. We observed that the diffusion of both primary and secondary antibody is arrested. This development is shown individually for each channel in Fig. 4b–i and quantified in the associated charts. The analysis shows that the functionalized region does not hinder diffusion of the fluorescent label, but collects, or “captures” anti biotin antibodies that have previously been diffusing out (grey arrows in Fig. 4i, Supplementary figure S15). When the second antibody is instead applied immediately after the first, avoiding diffusion, the first antibody is efficiently retained by the functionalized region (Supplementary figures S14 and S15).
The “lab on a biomembrane” concept is robust and practical and facilitates the deployment and manipulation of supported biomembranes. The design of the networks is ultimately software-defined with respect to assembling membrane constituents and reactants and to substrate positioning and timing. Diverse physical and chemical operations are possible, for example:
If the deposition sequence of the experiment shown in Fig. 2l, in which a POPC patch was overwritten by DOTAP vesicles, is reversed, POPC vesicles do not fuse with the DOTAP patch, but adhere to its surface and maintain some diffusional mobility (Fig. 5a). By reversing the injection flow from the middle channel of the pipette to a high aspiration rate, vesicles are collected in a stagnation point on the membrane surface beneath the channel exit (Fig. 5b–e). This previously reported hydrodynamic trapping of membrane components31 is possible because the particles experience the forces exerted by the aspiration flow and move laterally, but are restricted in perpendicular direction. A brief analysis of the trapping parameters is included in the supplementary section S12. Another prospective application area is directed transport of lipid film and associated molecules16,17, using patterned surfaces. We have created spreading lanes by covering the substrate with a hydrophobic polymer, where we defined accessible substrate areas photolithographically. Fig. 5f shows schematically how a circular deposition area, which is connected to a spreading lane, is accessed by the pipette. Fig. 5h–j are fluorescence recordings from a 10 minute deposition experiment with fluorescently labeled DOTAP vesicles on a surface pre-coated with POPC, demonstrating that the lipid front propagates only in the spreading lane. The sharp boundary in the distance plot of the emission intensity displayed in Fig. 5g indicates that the transport of lipid on the surface occurs through spreading, rather than by diffusion into the POPC film. This is analogous to capillary driven convective flow in 3D microfluidics32.
The “lab on a biomembrane” provides a multitude of experimental options at unprecedented convenience and flexibility and has the potential to widen the application scope of molecular lipid films in the life sciences and in bioinspired engineering.
A two-step procedure was followed for vesicle preparation: (I) Preparation of stock vesicle suspensions, (II) Preparation of small unilamellar vesicles. De-ionized water from a Milli-Q system (Millipore) was used for all preparations.
(I) Stock vesicle suspensions
For each recipe, a designated amount (see table) of lipids and lipid conjugates in chloroform were mixed and diluted with chloroform to a total concentration of 10 mg/ml. 300 μl of this solution was placed in a 10 ml round bottom flask and the chloroform was removed in a rotary evaporator at reduced pressure (−80 kPa) over a period of 6 hours. The dry lipid film at the walls of the flask was rehydrated with 3 ml of PBS buffer containing 5 mM Trisma Base (Sigma Aldrich), 30 mM K3PO4 (Sigma Aldrich), 30 mM KH2PO4 (Sigma Aldrich), 3 mM MgSO4*7H2O (Merck) and 0.5 mM Na2EDTA (Sigma Aldrich). The pH was adjusted to 7.4 with H3PO4 (Sigma Aldrich). The rehydrated lipid cake was placed in the fridge (4°C) overnight. In the final step the lipid cake was sonicated at 120 W/35 kHz (Bandelin Sonorex, Germany) at room temperature for 15–30 s, to induce the formation of giant vesicles of varying, mainly multiple lamellarity.
(II) Small unilamellar vesicles
Small unilamellar vesicles were prepared on the day the experiments were conducted. 100 μl of the desired vesicle stock solutions were diluted (1:10) with TRIS buffer [125 mM NaCl (Sigma Aldrich), 10 mM TRIS (VWR), 1 mM Na2EDTA (Sigma Aldrich), adjusted to pH = 7.4 and sonicated using a Sonics & Materials Vibra Cell™ High Intensity Ultrasonic Liquid Processor (Model 501, CIAB, Chemical Instruments AB, Sweden) at 15°C for 10 minutes. The sonicated samples were subsequently ultra-centrifuged at 40,000 rpm at 15°C for 30 minutes to separate multilamellar aggregates and tip debris (Beckman TL-100 Ultracentrifuge, USA). The small unilamellar vesicles in the supernatant were transferred to a separate tube. Critical: For high quality membrane fabrication, the vesicle suspensions must be freshly prepared. Upon prolonged storage, vesicle preparations form agglomerates.
The multifunctional pipette
The original multifunctional pipette with three on-chip solutions has been reported elsewhere25. Details on design and function of the re-engineered device used in the present study are provided as supplementary information. The pipette was operated by means of an in-house build pneumatic control unit, which interfaces to a PC computer via USB 2.0. It supports valve-less switching between four solutions, allows controlling the flow rates and adjusting the size of the hydrodynamically confined flow (HCF) volume, i.e., the extent of the region to which solutions are delivered.
Other experimental details
The preparation of plain and patterned glass surfaces is described in supplementary section S1, a detailed overview of the lipid mixtures used in experiments in section S2. Sections S3 and S4 describe the experimental setup and the microscopy methods used. Section S5 gives an overview of the control algorithm and section S6 lists the protocols for the individual experiments. Supplementary sections S7–S14 contain additional data and experimental details for: the deposition of lipid films from single (S7) and multiple components (S8), writing (S9), diffusion measurements (S10), membrane functionalization (S11) and hydrodynamic trapping (S12) and a set of fluorescence recovery after photo-bleaching (FRAP) experiments included as alternative method for determination of the lipid diffusion constants for different deposition times. A table of literature values is also included (S13). Further, the deposition spot size dependence on the flow rate and distance of the pipette from the substrate (S14). Four supplementary videos, corresponding to figures 2–5, are also supplied. Descriptions of the videos are located at the end of the supporting section.
Sackmann, E. Supported membranes: Scientific and practical applications. Science 271, 43–48 (1996).
Tanaka, M. & Sackmann, E. Polymer-supported membranes as models of the cell surface. Nature 437, 656–663 (2005).
Berti, D., Caminati, G. & Baglioni, P. Functional liposomes and supported lipid bilayers: towards the complexity of biological archetypes. Physical Chemistry Chemical Physics 13, 8769–8782 (2011).
Dietrich, C. et al. Lipid rafts reconstituted in model membranes. Biophys. J. 80, 1417–1428 (2001).
Gözen, I. et al. Fractal avalanche ruptures in biological membranes. Nat Mater 9, 908–912 (2010).
Han, X. J. et al. A Self-assembly Route for Double Bilayer Lipid Membrane Formation. ChemPhysChem 11, 569–574 (2010).
Keller, C. A., Glasmastar, K., Zhdanov, V. P. & Kasemo, B. Formation of supported membranes from vesicles. Phys. Rev. Lett. 84, 5443–5446 (2000).
Reimhult, E., Hook, F. & Kasemo, B. Intact vesicle adsorption and supported biomembrane formation from vesicles in solution: Influence of surface chemistry, vesicle size, temperature and osmotic pressure. Langmuir 19, 1681–1691 (2003).
Cremer, P. S. & Boxer, S. G. Formation and spreading of lipid bilayers on planar glass supports. J. Phys. Chem. B 103, 2554–2559 (1999).
Richter, R. P., Berat, R. & Brisson, A. R. Formation of solid-supported lipid bilayers: An integrated view. Langmuir 22, 3497–3505 (2006).
Castellana, E. T. & Cremer, P. S. Solid supported lipid bilayers: From biophysical studies to sensor design. Surf. Sci. Rep. 61, 429–444 (2006).
Reviakine, I. & Brisson, A. Formation of supported phospholipid bilayers from unilamellar vesicles investigated by atomic force microscopy. Langmuir 16, 1806–1815 (2000).
Woodward, J. T. & Meuse, C. W. Mechanism of formation of vesicle fused phospholipid monolayers on alkanethiol self-assembled monolayer supports. J. Colloid Interface Sci. 334, 139–145 (2009).
Chan, Y. H. M. & Boxer, S. G. Model membrane systems and their applications. Curr. Opin. Chem. Biol. 11, 581–587 (2007).
Kam, L. & Boxer, S. G. Spatially selective manipulation of supported lipid bilayers by laminar flow: Steps toward biomembrane microfluidics. Langmuir 19, 1624–1631 (2003).
Groves, J. T. & Boxer, S. G. Micropattern formation in supported lipid membranes. Accounts Chem. Res. 35, 149–157 (2002).
Jonsson, P., Gunnarsson, A. & Hook, F. Accumulation and Separation of Membrane-Bound Proteins Using Hydrodynamic Forces. Anal. Chem. 83, 604–611 (2011).
Zagnoni, M. Miniaturised technologies for the development of artificial lipid bilayer systems. Lab Chip 12, 1026–1039 (2012).
Lenhert, S. et al. Lipid multilayer gratings. Nat. Nanotechnol. 5, 275–279 (2010).
Salafsky, J., Groves, J. T. & Boxer, S. G. Architecture and function of membrane proteins in planar supported bilayers: A study with photosynthetic reaction centers. Biochemistry 35, 14773–14781 (1996).
Nair, P. M., Salaita, K., Petit, R. S. & Groves, J. T. Using patterned supported lipid membranes to investigate the role of receptor organization in intercellular signaling. Nat. Protoc. 6, 523–539 (2011).
Chan, Y. H. M., Lenz, P. & Boxer, S. G. Kinetics of DNA-mediated docking reactions between vesicles tethered to supported lipid bilayers. Proc. Natl. Acad. Sci. U. S. A. 104, 18913–18918 (2007).
Nielsen, C. H. Biomimetic membranes for sensor and separation applications. Anal. Bioanal. Chem. 395, 697–718 (2009).
Bally, M. et al. Liposome and Lipid Bilayer Arrays Towards Biosensing Applications. Small 6, 2481–2497 (2010).
Ainla, A., Jeffries, G. D. M., Brune, R., Orwar, O. & Jesorka, A. A multifunctional pipette. Lab Chip 12, 1255–1261 (2012).
Richter, R., Mukhopadhyay, A. & Brisson, A. Pathways of lipid vesicle deposition on solid surfaces: A combined QCM-D and AFM study. Biophys. J. 85, 3035–3047 (2003).
Schonherr, H., Johnson, J. M., Lenz, P., Frank, C. W. & Boxer, S. G. Vesicle adsorption and lipid bilayer formation on glass studied by atomic force microscopy. Langmuir 20, 11600–11606 (2004).
Azizi, F. & Mastrangelo, C. H. Generation of dynamic chemical signals with pulse code modulators. Lab Chip 8, 907–912 (2008).
Kaufmann, S., Sobek, J., Textor, M. & Reimhult, E. Supported lipid bilayer microarrays created by non-contact printing. Lab Chip 11, 2403–2410 (2011).
Nguyen, T. T., Sly, C. L. & Conboy, J. C. Comparison of the Energetics of Avidin, Streptavidin, NeutrAvidin and Anti-Biotin Antibody Binding to Biotinylated Lipid Bilayer Examined by Second-Harmonic Generation. Anal. Chem. 84, 201–208 (2012).
Jonsson, P. et al. Hydrodynamic trapping of molecules in lipid bilayers. Proc. Natl. Acad. Sci. U. S. A. 109, 10328–10333 (2012).
Juncker, D. et al. Autonomous microfluidic capillary system. Anal. Chem. 74, 6139–6144 (2002).
This work was financially supported by the Swedish Research Council (VR), the European Research Commission (ERC) and the Nordic Council of Ministers (Nordforsk). The authors thank the Chalmers Area of Advance for Nanoscience and Technology for supporting the development of the multifunctional pipette.
The authors declare no competing financial interests.
About this article
Cite this article
Ainla, A., Gözen, I., Hakonen, B. et al. Lab on a Biomembrane: Rapid prototyping and manipulation of 2D fluidic lipid bilayer circuits. Sci Rep 3, 2743 (2013). https://doi.org/10.1038/srep02743
Soft Matter (2020)
Effects of pH, temperature and shear on the structure–property relationship of lamellar hydrogels from microbial glucolipids probed by in situ rheo-SAXS
Soft Matter (2020)
Combining patch-clamping and fluorescence microscopy for quantitative reconstitution of cellular membrane processes with Giant Suspended Bilayers
Scientific Reports (2019)