Background & Summary

With lifestyle changes and rapid economic growth in China, the CO2 emissions in China have increased rapidly. The CO2 emissions from fossil fuel combustion (energy-related emissions) and cement production (process-related emissions) in China rose steadily and slowly in the pre-WTO era (1980–2002). These emissions increased from 1,467 to 3,694 million tonnes during this period1, a rate of 8% per year. After China joined the WTO in 2002, manufacturing in China quickly started to expand. Thus, China’s emissions also spiked. The annually averaged emissions rate increase from 2002 to 2007 reached 13%. This expansion led China to become the world’s top energy consumer and CO2 emitter2. Now, the human-induced CO2 emissions in China account for approximately 30% of global emissions3. Consequently, China is playing an important role in global emissions reduction and climate change mitigation. The Chinese government has promised that its CO2 emissions will peak by 20304 and that it will achieve a 60%-65% reduction in its emission intensity (per GDP CO2 emissions) by 2030 compared with its 2005 level5.

An accurate accounting of China’s CO2 emissions is the first step in achieving emissions reductions. However, the CO2 emissions accounts for China have not been well documented. There is no annual, officially published emission report in China. The Chinese government has only published national CO2 emission inventories for 19946, 20057, and 20128. Scholars and research institutes have previously assumed the responsibility for calculating China’s CO2 emissions. The discrepancy between their estimations exceeded 1,770 million tonnes (20%) in 2011, which is approximately equal to the Russian Federation’s total emissions in 20119. Considering that the Russian Federation was the 4th highest emitter in the world at that time3, the uncertainties in China’s emission accounts should not be underestimated. Compared with the three official CO2 emissions in China for 1994, 2005, and 2012, the estimates by international academic institutes have been relatively high. For example, in 2012, the Emission Database for Global Atmospheric Research (EDGAR) and Carbon Dioxide Information Analysis Centre (CDIAC) estimates were 10,057 and 10,020 million tonnes, respectively, which are 8% higher than the official estimate of China’s emissions (9,323 million tonnes). The primary reason is that nearly all the research institutes and scholars use the default emission factors recommended by IPCC, which are higher than China’s survey value10. The energy data quality is another reason for the limited veracity of China’s emission accounts11. Furthermore, all the existing datasets only present the national total CO2 emissions. There are scarcely any emission inventories constructed according to fossil fuel types and industrial sectors for China and its 30 provinces.

Considering the large uncertainties/data gaps in China and its provincial CO2 emission accounts, our first version of the dataset presents the CO2 emission inventories of China and its 30 provinces from 1997 to 2015. We also provide the national and provincial energy data used in the calculation for transparency and verifiability. We will update and publish the dataset annually. Our emissions are calculated based on the updated emission factors10 and most up to date energy consumption data12. The inventories are constructed in a uniform format, which includes emissions from 17 fossil fuels burned in 47 socioeconomic sectors (energy-related emissions) and those from the cement production industry (process-related emissions). The uniformly formatted time-series emission inventories can be utilized widely. These inventories can provide robust data support for further analysis of China’s environmental issues1317 and emissions reduction policy-making13. The data can be downloaded freely from China Emission Accounts and Datasets (CEADs, and Figshre.


The CO2 emissions in this dataset were estimated in terms of the IPCC administrative territorial-based accounting scope. The administrative territorial emissions refer to emissions ‘taking place within national (including administered) territories and offshore areas over which the country has jurisdiction (page overview.5)’18. The territorial-based emissions do not include emissions from international aviation or shipping19. The administrative territorial emissions can be used to evaluate the human-induced emissions by domestic production and resident activities directly within one region’s boundaries20,21. Our CO2 emission inventories were constructed in two parts: energy- and process-related (cement) CO2 emissions. The energy-related emissions can be calculated using two approaches: the sectoral and reference approaches. Figure 1 presents a diagram of the entire construction of our emission inventories.

Figure 1: Diagram of CO2 emission inventory construction.
figure 1

Energy-related sectoral approach emissions

The energy-related emissions refer to the CO2 emitted during fossil fuel combustion. According to the IPCC guidelines22, the sectoral approach emissions are calculated based on the fossil fuels’ sectoral combustion; see equation (1) below.

(1) C E i j = A D i j × N C V i × C C i × O i j

where CEij refers to the CO2 emissions from fossil fuel i burned in sector j; ADij represents the fossil fuel consumption by the corresponding fossil fuel types and sectors; NCVi refers to the net caloric value, which is the heat value produced per physical unit of fossil fuel combustion; CCi (carbon content) is the CO2 emissions per net caloric value produced by fossil fuel i; and Oij is the oxygenation efficiency, which refers to the oxidation ratio during fossil fuel combustion.

The subscripts i (fossil fuel) and j (sector) correspond to those used in Table 1 and Table 2. There are 26 fossil fuels in China’s energy statistics systems, listed in the most recent energy balance table in the China energy statistical yearbook. We merged these fuels into 17 types due to the small consumption and similar quality of certain fuels to that of others, as shown in Table 1. Among the 17 fossil fuels, raw coal, crude oil, and natural gas are primary energy sources. The remaining 14 fuels are classified as secondary energy sources, which are extracted or processed from primary sources. The 47 sectors used in the energy statistical system are also consistent with those used in China’s national economic accounting23 (see Table 2). Due to all the administrative boundaries (at both the national and provincial scales) that span both urban and rural geographies in China, urban and rural households are listed separately in the multi-scale CO2 emission inventories.

Table 1 Fossil fuels and emission factors (NCVi, CCi).
Table 2 Economic sectors.

Fossil fuels used as chemical raw materials (‘non-energy use’ in the Energy Balance Table), as well as the energy loss during transportation, were removed from the total fossil fuel consumption to avoid double counting. The non-burning fossil fuels input during energy conversion processes was also excluded as the processes involve little CO2 emissions. Taking the process of coal washing as an example, the carbon elements in raw coal are converted into cleaned coal and other washed coal during the process. The real CO2 emissions concentrated in the combustion of cleaned coal and other washed coal. Other similar processes include ‘coking’, ‘petroleum refineries’, ‘gas works’, ‘briquettes’. Only fossil fuels burnt during the transformation processes were taken into account for emission calculation, i.e., ‘thermal power’ and ‘heating supply’.

Emissions from electricity/heat generated within city boundaries were counted based on the energy input for power/heat generation (‘thermal power’ and ‘heating supply’) and were allocated to the electricity generation sector24. Our administrative territorial emission inventories excluded emissions from imported electricity and heat consumption from outside the nation/one province boundaries. We only focused on fossil fuels consumed within the nation/one province boundary.

The national sectoral fossil fuel consumption (ADij) was collected from the Energy Statistical Yearbooks published officially by the National Bureau of Statistics of China25. China has officially revised its national energy statistics four times since 2000 (in 2004, 2005, 2009, and 2014’s China energy statistical yearbooks). Each revision has modified the energy balance sheets and sectoral energy consumption. For example, the total energy consumption of 2011 are modified from 3,480 to 3,870million tonnes of standard coal equivalent (in coal equivalent calculation) in 2014’s revision, enlarged by 11.2%. Our emission inventories were calculated based on the most up to date energy data published after 201425.

For the provincial scale, the China Energy Statistical Yearbooks only publish each province’s energy balance table every year. We collected the total consumption of the 17 fossil fuels from the balance table and then used the provinces’ sectoral fossil fuel consumption to divide the total consumption. Most of the provinces’ sectoral fossil fuel consumption was collected from the provinces' corresponding statistical yearbooks. For certain provinces (Hebei, Jiangsu, Zhejiang, Shandong, Guangxi, Hainan, Sichuan, and Guizhou) that do not have the data in their yearbooks, we used the national economic census data from 200826, which assumes the industry structure was stable during the intervening years.

Both the IPCC and National Development and Reform Commission of China (NDRC) have published default factors (NCVi, CCi) for China. Most of the current research uses the IPCC default value. According to our previous survey on China’s fossil fuel quality and cement process10, the IPCC default emission factors are approximately 40% higher than China’s survey value. In our datasets, we used the updated emission factors, see Table 1. As our previous study only reported the emission factors of three primary fossil fuels (i.e., raw coal, crude oil, and natural gas), we estimated the emissions factors of other 14 secondary fossil fuels by scaling them down according to the ratio of the updated primary fossil fuels’ emission factors to those of NDRC. We used the ratio of raw coal, crude oil to update emission factors of coal-related, oil-related fuels, respectively. For Oij, our datasets adopted different oxygenation efficiencies for the fossil fuels used in different sectors27, which represents the different combustion technology levels of the sectors (shown in Table 3 (available online only)).

Table 3 Oxygenation efficiency of fossil fuels combusted in sectors (Oij)

We used MATLAB R2014a to construct the emission inventories with sectoral fossil fuel consumption and emission factors. We provided the code in the Supplementary Information. We also provided the formatted energy data of China and its provinces (energy inventories) in our datasets for additional data transparency and verifiability (see Data Citation 1, File ‘China national energy inventory, 2000–2015’ and File ‘China provincial energy inventory, 1997–2015’). Researchers will be able to use the MATLAB code and energy inventories to recalculate the CO2 emissions for China by adopting different emission factors.

Energy-related reference approach emissions

Apart from the sectoral approach, the energy-related emissions of one region can also be estimated using the reference approach. ‘The Reference Approach is a top-down approach, using a country’s energy supply data to calculate the emissions of CO2 from combustion of mainly fossil fuels. The Reference Approach is a straightforward method that can be applied on the basis of relatively easily available energy supply statistics (Volume 2, Chapter 6, Page 5)’22. The IPCC suggests ‘to apply both a sectoral approach and the reference approach to estimate a country’s CO2 emissions from fuel combustion and to compare the results of these two independent estimates (Volume 2, Chapter6, Page 5)’22. The reference emissions can be used to verify and support the sectoral emissions.

As the reference emissions were calculated from the fossil fuels’ production base, we only considered three primary fossil fuels (raw coal, crude oil, and natural gas). With the assumption of carbon balance, the carbon in the supply of the 3 primary fossil fuels should be equal to the carbon contained in the total consumption of the 17 fossil fuels9. We calculated the reference approach emissions as in equation (2):

(2) C E r e f i = A D r e f i × E F i

where CEref−i refers to the reference CO2 emissions from fossil fuel i, EFi and ADref−i are the emission factors and apparent consumption of the corresponding fossil fuel, respectively. The emission factors for the 3 primary fossil fuels are the same as those used in the sectoral approach emissions calculation10. Values of ADref−i were calculated as in equation (3). For the same reason, we removed the non-energy use and loss parts from the fuel’s apparent consumption. The items in bracket were only used to calculate the apparent consumption of provinces and were skipped when calculating the national consumption.

(3) A D r e f i = I n d i g e n o u s P r o d u c t i o n + I m p o r t s E x p o r t s + ( M o v i n g i n f r o m O t h e r P r o v i n c e s S e n d i n g O u t t o O t h e r P r o v i n c e s ) ± S t o c k C h a n g e N o n E n e r g y U s e L o s s

All the items in equation (3) (at both the national and provincial scales) were collected from the most up to date energy balance tables published officially in the China Energy Statistical Yearbooks25.

Process-related (cement) CO2 emissions

The process-related emissions refer to CO2 emitted as a result of physical-chemical reactions in the production process and not the energy combusted by the industry28. ‘The fossil fuels used in this transformation stage are considered the carbon emissions from fossil fuel combustion performed by the industrial sectors and are not considered as the industrial process emissions (page 240)’29. In this study, we only investigated cement production, which accounts for approximately 75% of China’s total process-related CO2 emissions7. We calculated the cement-related CO2 emissions as in equation (4):

(4) C E t = A D t × E F t

where CEt refers to the process-related CO2 emissions from cement production and ADt is the activity data for cement-related emissions accounting, which refer to cement production. We collected data for the cement productions of China and its provinces from the official dataset of the National Bureau of Statistics30, which are consistent with the China Statistical Yearbooks31. The expression EFt refers to the emission factor for cement production, which is 0.2906, also collected from Liu, et al.10. The cement-related CO2 emissions were allocated to the sector ‘Non-metal Mineral Products’ in the final emission inventories.

Comparison of the sectoral- and reference-approach emission inventories

The difference between the sectoral- and reference-approach emission inventories laid in the way we calculated the fossil fuel consumptions when estimated the energy-related emissions. The process-related emissions from the two approaches were exactly the same. The sectoral emissions were calculated from the energy consumption aspect while the reference emissions were calculated via the energy production and trade data. The reference approach assumed that all the carbon elements from the primary energy sources (excluding the transport loss and non-energy usage part) were converted into CO2 emissions. IPCC suggest calculating the reference emissions for one country as a validation of the sectoral emissions. Therefore, we calculated both the sectoral and reference emission for China and its provinces in our datasets. The red lines in Fig. 2 compared the sectoral and reference emissions.

Figure 2: Comparisons of the two-approach emissions and other existing emission inventories.
figure 2

Data source: National energy consumption12; National Communication on Climate Change (NC) 20057; NC20128; Carbon Dioxide Information Analysis Centre (CDIAC)42; Emissions Database for Global Atmospheric Research (EDGAR)43; Global Carbon Budget (GCB)44; British Petroleum (BP)45; U.S. Energy Information Administration (EIA)46. Multi-resolution emission inventory for China (MEIC)4749. Note that emissions by NC2005 include CO2 emissions from lime and glass production as well, emissions by MEIC, BP and EIA include the energy-related emissions only.

Our reference emissions were 1 to 7% higher than the sectoral emissions. The differences between the two approaches can be explained from three aspects. First, the energy loss during energy transformation process was not excluded from the reference energy consumption. Second, only transport loss and non-energy usage of primary energy sources were excluded from the total consumption in the reference approach. Those of secondary energy sources were not removed. Third, there was roughly 1.2% statistical difference between the energy production and consumption data in China’s energy balance table12.

As discussed in the energy-related reference approach emissions section above, the reference emissions were calculated with the data of primary fossil fuels only, while the emissions embodied in the secondary fossil fuels cannot be reflected. Due to the frequent energy trade among Chinese provinces, especially the secondary energy types, the provincial reference emissions cannot reflect the real CO2 emissions within one provincial boundary. Considering the data completeness and transparency, we provided the provincial reference emission inventories in our datasets as well for reference.

Data Records

A total of 1,172 data records (emission and energy inventories) are contained in the datasets. Of these,

  • 16 are national energy inventories (from 2000 to 2015) [Data Citation 1, File ‘China national energy inventory, 2000–2015’];

  • 570 are provincial energy inventories (30 provinces, from 1997 to 2015) [Data Citation 1, File ‘China provincial energy inventory, 2000–2015’];

  • 16 are national sectoral approach inventories (from 2000 to 2015) [Data Citation 1, File ‘China national CO2 emission inventory (sectoral approach), 2000–2015’];

  • 16 are national reference approach inventories (from 2000 to 2015) [Data Citation 1, File ‘China national CO2 emission inventory (reference approach), 2000–2015’];

  • 570 are provincial sectoral approach inventories (30 provinces, from 1997 to 2015) [Data Citation 1, File ‘China provincial CO2 emission inventory (sectoral approach), 1997–2015’];

  • 570 are provincial reference approach inventories (30 provinces, from 1997 to 2015) [Data Citation 1, File ‘China provincial CO2 emission inventory (reference approach), 1997–2015’];

Our CO2 emission inventories were constructed in a uniform format. The sectoral approach emission inventories are matrices with 19 columns and 47 rows, as shown in Table 4 (available online only) (an example of the China CO2 emission inventory, 2015). The 19 columns are 17 fossil fuel-related emissions, cement-related emissions and total emissions. The 47 rows represent the 47 socioeconomic sectors. Each element of the matrices represents the CO2 emissions from fossil fuel combustion/cement production in the corresponding sector. The sectoral and reference approach inventories include emissions from every individual item (e.g., production and import) of the three primary energy sources and the cement process. As an example, Table 5 presents the sectoral and reference approach emission inventories for China from 2000 to 2015.

Table 4 Sectoral approach CO2 emission inventory of China, 2015 (in million tonnes)
Table 5 Sectoral and reference approach CO2 emission inventory of China, 2000–2015 (in million tonnes)

Figure 3 represents China’s CO2 emissions by fossil fuel types since 2000 and the sector structure of 2000, 2005, 2010, and 2015. Table 6 and 7 show the sectoral and reference approach emissions of China's 30 provinces (excluding the Tibet, Hong Kong, Macro and Taiwan due to data lacking).

Figure 3: China’s CO2 emissions 2000 to 2015, in million tones.
figure 3

The stack area chart above represents CO2 emissions from 17 fossil fuels, and the black line represents the reference emissions. The chart shows that China’s total CO2 emissions peaked in 2013 (9,524.24 million tonnes, sectoral-based emissions; 10,145, reference-based emissions). Raw coal was the primary source of CO2 emissions, accounting for 52.58% of the total emissions in 2015. The four pie charts below illustrate the sectoral structure in CO2 emissions in 2000, 2005, 2010, and 2015. The energy production and heavy manufacturing industries were the primary contributors.

Table 6 Sectoral approach CO2 emission inventory of China’s provinces, 1997–2015 (in million tonnes
Table 7 Reference approach CO2 emission inventory of China’s provinces, 1997–2015 (in million tonnes)

Technical Validation

Uncertainty analysis

Uncertainty analyses are an important tool for improving emission inventories with uncertainty, which are an essential element of a greenhouse gas emissions inventory. Considering the small amounts and low uncertainties of the process-related emissions in cement production10,32, we only calculated the uncertainties from energy-related emissions in this study. The uncertainties of inventory are caused by many reasons, as the energy-related CO2 emissions were calculated as fossil fuel consumption (activity data) multiplied by the emission factors, the uncertainties should be ‘derived for the component parts such as emission factors, activity data and other estimation parameters (Volume 1, Chapter 3, Page 6)22. We quantified both the uncertainties of emission factors and fossil fuel consumption data for our datasets.

As introduced above in the Methods section, this study adopted the emission factors from Liu, et al.10. However, the emission factors of China’s fossil fuel combustions may have large variations as discussed in subsequent studies (such as Olivier, et al.33; Le Quéré, et al.34; Korsbakken, et al.35; Jackson, et al.36). To quantitatively characterize the range of emission factor, we summarised the emission factors (NCVi, CCi, and Oi) from seven other sources: IPCC, National Bureau of Statistics (NBS), NDRC, Initial National Communication on Climate Change (NC1994), Second National Communication on Climate Change (NC2005), Multi-resolution emission inventory for China (MEIC), UN-China, and UN-average (shown in Table 8 (available online only)). It is found that the fuels’ net caloric values varied a larger range than those of carbon content and oxygenation efficiency. Taking raw coal as an example, the Coefficient of Variation (CV, the standard deviation divided by the mean) of raw coal’s net caloric value is 15%, while the CVs of carbon content and oxygenation efficiency are 2 and 4% respectively. The CV of raw coal’s comprehensive emission factor (NCVi×CCi×Oi) is 18%. The emission factor of coal-related fuels varied in a wider range than those of oil-related fuels and the natural gas. The average CV of coal-related fuels is 18%, while that for the oil-related fuels and natural gas is 4 and 5% respectively. Among the emission factors from eight sources, the IPCC and UN-average have the highest values, while Liu et al.’s study (used in this study), MEIC and NC1994 have the lowest values.

Table 8 Emission factors by different sources and CV

Due to the poor quality of China’s fossil fuel data, the fossil fuel consumption data also have large uncertainties. According to the previous literature, the fossil fuel consumed in electricity generation sector had a CV of 5%37,38, while the fossil fuel consumed in other industry and construction sector had a CV of 10%22,39. The CV of fossil fuel consumed in the transportation sector was 16%40, while residential and primary industry fossil fuel usage even had higher CVs of 20%22 and 30%41 respectively. The uncertainties in China’s fossil fuel data has been addressed and discussed by Guan, et al.11 previously. Possible reasons include the opaqueness in China’s statistical systems, especially on the ‘statistical approach on data collection, reporting and validation (Page 673)11; and the dependence of China’s statistics departments with other government departments. As a result, China’s national fossil fuel consumption is smaller than the provincial aggregated data. Despite that China enlarged its 2000–2013 national energy data in 2014, there was still roughly 5% gap between the latest national and provincial aggregated energy data.

We employed the Monte Carlo simulations to propagate the uncertainties induced by both fossil fuel consumption and emission factors to provide the uncertainty estimates for entire emission inventories22. According to the Monte Carlo technique, we first assumed normal distributions (probability density functions) for both activity data (fossil fuel consumption) and emission factors with CVs discussed above10,32. Random sampling on both the activity data and emission factors were then conducted for 100,000 times and generated 100,000 estimations on the CO2 emissions. The uncertainty range, therefore, was 97.5% confidential intervals of the estimations. The above simulation was conducted in MATLAB R2014a.

We found that the uncertainties of the entire CO2 emissions inventories were roughly (−15%, 25%) at a 97.5% confidential level. Table 9 (available online only) and Fig. 4 show the uncertainties in the national emission inventories from 2000 to 2015. The above ranges, e.g., (−15%, 25%), reflected the uncertainties from both emission factor and activity data. In particular, concerning the continuous debate on the emission factor of fossil fuel combustion in China3336, we incorporated 8 emission factors from independent sources to represent the uncertainty of emission factors. In order to separate the uncertainty induced by emission factor and activity data, we then conducted the Monte Carlo simulations by assuming the CV of one of them was 0. The results showed that uncertainties from the emission factors in 2015 were (−15.8%, 23.7%), while the uncertainties from the activity data were (−1.4%, 9.2%). This implied the emission factors of fossil fuels induced higher uncertainty to the final estimation.

Table 9 Uncertainties in China’s CO2 emission inventories (97.5% confidence level)
Figure 4: Uncertainties of the emissions.
figure 4

The grey area in the figure shows the 97.5% confidential interval of China’s CO2 emission estimations. The lines present China’s CO2 emission calculated based on the national/provincial aggregated energy data and different emission factors. The figure shows that emissions calculated based on the NBS, NDRC, NC1994, NC2005, MEIC, UN-China’s emission factors fall in the 97.5% confidential interval.

In Fig. 4, the grey area in the figure indicates the 97.5% confidential interval of China’s CO2 emission estimations of this study. The solid lines present China’s CO2 emission calculated based on the national energy data and 8 different emission factors, while the dash lines present the emissions based on the provincial aggregated energy data. The figure shows that emissions calculated based on emission factors from Liu et al.’s nature, NBS, NDRC, NC1994, NC2005, MEIC, and UN-China’s fall in the 97.5% confidential interval. Emissions calculated based on the IPCC and UN-average emissions factors are 10% larger than the upper bound of the 97.5% confidential interval due to their high emission factor value, while the emissions calculated based on the emission factors from Liu et al.’s nature, NC1994, and MEIC have relatively low values. In addition, the emissions calculated based the provincial aggregated energy data are about 5% higher than that based on national data due to the difference in the national and provincial data.

In addition to the uncertainties of emission factors and fossil fuel data considered in the Monte Carlo techniques above, there were some other uncertainties that should be taken into consideration when using the datasets, such as ‘lack of completeness’, ‘lack of data’, ‘measurement error’. These uncertainties were very small and difficult to quantify; however, they were also essential parts of the inventories’ uncertainties. 1) Lack of completeness: We only considered the energy-related emissions and cement-related emissions in our datasets. Emissions from other sources were not taken into account, such as ‘agriculture’, ‘land-use change and forestry’, ‘waste’, and other industrial processes. 2) Lake of data: As discussed above, the sectoral fossil fuel consumption of 8 provinces were lacking. We used the sectoral fossil fuel consumption structure in 2008 to estimate that of the intervening years. Such a replacement had no much effect on the total emissions, but increased the uncertainties in provincial sectoral emissions. Also, the emission factors for secondary fossil fuels were estimated based on the primary fossil fuel emission factors’ ratio. 3) Measurement error: the ‘measurement error is random or systematic, results from errors in measuring, recording and transmitting information; inexact values of constants and other parameters obtained from external sources (Volume 1, Chapter 3, Page 11)’22. The measurement errors might be generated in the energy statistics and emission factors’ calculation.

Comparison with existing emission estimates

We compared our emissions with estimates from other research institutes, shown in Fig. 2. We found that our national sectoral emissions were the lowest among the estimates. The Global Carbon Budget (GCB) had the highest value until EDGAR passed it since 2012. Our national sectoral emissions were 9 to 18% lower than the highest value. This was mainly because that we used the updated emission factors, which were lower than the IPCC default value. Our results were 1–3% higher than BP and MEIC’s since 2013. Even considering the emissions from BP and MEIC not including the cement-related emissions, they had closer results with our datasets compared with other emission estimations. Our estimates were highly consistent with the newly published official emission inventory. The Chinese government published the ‘First Biennial Update Report on Climate Change8’ by the end of 2016. In the report, the energy-related CO2 emissions in 2012 were 8,688 million tonnes (the blue points in Fig. 2), only 2.79% higher than our estimates (national sectoral emissions, 8,446 million tonnes). This tiny difference falls into the uncertainty range of the both inventories.

From the aspect of format, the existing emission estimates only present the total energy-related emissions of the whole country, or emissions from three fossil fuel categories at most (solid, liquid, and gas). Our datasets provided the energy-related CO2 emissions from 47 socioeconomic sectors and 17 fossil fuels to give detailed demonstrations of China’s emission statue as well as its provinces. Thus, our datasets can be a more detailed supplement to the existing emission estimates and the official emission inventories.


Our datasets have the following limitations: 1) We used the national average emission factors of fossil fuels and cement production when calculating the provincial CO2 emissions in the current version. The emission factors should be different in different regions considering the discrepancy in energy quality and cement production technology. In the future research, we will specify the emission factor of each province to achieve more accurate emission inventories for provinces; 2) In the current version, we used the sectoral fossil fuel consumption structure in 2008 to estimate that of the intervening years for 8 certain provinces. In the future, we will investigate the 8 provinces for more accurate data. 3) We only considered emissions from cement production in the current process-related emissions accounts. The latest official emission inventory in 2012 include other 9 processes such as glass, lime, steel production. In the future research, we will extend the scope of our datasets to include more industrial processes.

Additional information

How to cite this article: Shan, Y. et al. China CO2 emission accounts 1997–2015. Sci. Data 5:170201 doi:10.1038/sdata.2017.201 (2018).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.