Tidal channels are crucial for the functioning of wetlands, though their morphological properties, which are relevant for seafloor habitats and flow, have been understudied so far. Here, we release a dataset composed of Digital Terrain Models (DTMs) extracted from a total of 2,500 linear kilometres of high-resolution multibeam echosounder (MBES) data collected in 2013 covering the entire network of tidal channels and inlets of the Venice Lagoon, Italy. The dataset comprises also the backscatter (BS) data, which reflect the acoustic properties of the seafloor, and the tidal current fields simulated by means of a high-resolution three-dimensional unstructured hydrodynamic model. The DTMs and the current fields help define how morphological and benthic properties of tidal channels are affected by the action of currents. These data are of potential broad interest not only to geomorphologists, oceanographers and ecologists studying the morphology, hydrodynamics, sediment transport and benthic habitats of tidal environments, but also to coastal engineers and stakeholders for cost-effective monitoring and sustainable management of this peculiar shallow coastal system.

Design Type(s)
  • time series design
  • observation design
  • data integration objective
Measurement Type(s)
  • channel of a watercourse
Technology Type(s)
  • data acquisition system
Factor Type(s)
    Sample Characteristic(s)
    • Venetian Lagoon
    • tidal watercourse

    Background & Summary

    Coastal transitional systems are amongst the most productive and valuable environments on Earth1,​2,​3,​4. The hydrodynamics and related sediment, nutrient and biota exchange of these systems with the open sea is governed by their tidal networks, intricate patterns of bifurcating tidal channels dissecting tidal flats and salt marshes. Tidal networks are observed worldwide, with the best-known examples including the inlets of the East Coast of the United States, the Wadden Sea and the Lagoon of Venice. These environments often represent highly urbanized settings with half of the world’s population and 13 of the largest mega-cities located close to the coast. Therefore, tidal networks and coastal transitional environments undergo fast morphological changes under natural and anthropogenic pressures, which have lead to increased flooding and habitat losses (e.g., shrinking salt marshes) that are likely to further increase due to climate change5,​6,​7,​8.

    Despite being so relevant for the functioning of coastal transitional systems, tidal channels are still less studied than their river counterparts. The relatively few morphological observations on tidal channels rely mainly on limited-resolution 2-D topographic surveys of channel profiles and cross-sections like those in the Tijuana estuary9, and along the Schelt estuary in Belgium10, or on aerial or satellite images as for example in New Jersey11, and in Venice Lagoon12,13.

    The complex three dimensional morphology of tidal channels is still poorly imaged because shallow transitional environments are difficult to map in a comprehensive way. Optical imaging of the bottom is very limited in turbid areas like these. Acoustic devices, including MBES, have had restricted use in depths of 2–5 metres, mostly due to side-lobe effect14, bottom reverberation or multiple reflections that were difficult to circumvent. Only the recent technological developments are enabling multibeam systems to achieve very high performances reaching resolutions up to 0.05 m and operating up to 1 m depths8,15,​16,​17.

    The dataset presented in this paper contains high-resolution data collected in the channel network of the Venice Lagoon by means of a high-resolution, multi-frequency MBES (Fig. 1). The Venice Lagoon is the largest lagoon in the Mediterranean (550 km2 and with an average depth of about 1.5 m) and is one of the UNESCO World Cultural and Natural Heritage sites, including the historical city of Venice. Previous mapping of the whole Venice Lagoon were carried out in 1927, 1970 and 2002. Despite their low, and typically highly costly resolution (always >10 m), the resulting maps allowed a first recognition and semi-quantitative estimate of the erosional trends affecting the wetlands and of the deepening of the central lagoon18. In the last century, the lagoon morphology and ecological properties dramatically changed with a decrease of the salt marsh areas by more than 50% (shrinking from 68 km2 in 1927 to 32 km2 in 2002) and a net sediment flux modification18,​19,​20,​21. Relative sea level rise will likely increase the frequency of flooding events in Venice22,​23,​24. To protect the city from floods (‘high water events’), a complex array of large mobile barriers is under construction (MOSE system) through major modifications of the three lagoon inlets. Once in full operational mode, the MOSE system might substantially affect the lagoon hydrodynamics and, consequently, sediment transport and sediment balance25,​26,​27. More generally, the MOSE system is a global engineering example for coastal protection against storm surges in a frame of overall mean sea level rise. A discussion on the implicit assumptions and limitations of the MOSE solution for the high water in Venice can be found in Trincardi et al.24.

    Figure 1: Working area with coloured polygons representing acquisition coverage by week numbers.
    Figure 1

    The light pink polygon depicts the area surveyed by the Istituto Idrografico della Marina (IIM) (Italian Hydrographic Institute), whereas the coloured ones the CNR-ISMAR weekly covered areas. Pseudo-true-colour LANDSAT 8 OLI imagery as background.

    Before the MOSE system begins to function, it was important to have a full picture of the bathymetry and currents of the tidal channels and inlets, which are the most dynamical portion of the lagoon. These data represent, therefore, a precise reference for monitoring and quantifying future modifications of the channel and inlets morphology and for analyzing trends of the lagoon future evolution.

    In 2013, an extensive mapping was carried out by CNR-ISMAR within the project RITMARE (a National Research Programme funded by the Italian Ministry of Education, University and Research). A team of more than 25 scientists was involved to collect high-resolution bathymetry of the tidal channel network and the inlets (Figs 1 and 2). This survey merges with the complementary mapping of the lagoon inlets conducted by the Italian Hydrographic Institute in the offshore areas at the same time frame and using similar equipment.

    Figure 2: DTM from the multibeam bathymetry at 0.5 m resolution and 5 times vertical exaggeration showing the distribution of Sound Velocity Profiles (SVPs) collected during the survey.
    Figure 2

    The blue boxes indicate the areas validated by the Italian Hydrographic Institute and the data included in the official nautical charts. The red, green and yellow boxes show the location of the areas in Figs 68, respectively, with pseudo-true-colour LANDSAT 8 OLI imagery as background.

    Bathymetric and seafloor BS-data can now be employed for a variety of studies defining aspects of the evolution of the lagoon including: hydrodynamic modelling, sediment dynamics and geomorphology, geo-archaeology or habitat mapping. This dataset is unique not only because it depicts the seafloor morphologies with unprecedented detail but also, because it was acquired just before the MOSE barrier system starts to operate. Therefore it represents a benchmark for evaluating the possible impacts of the major engineering interventions taking place in the Lagoon of Venice and its inlets. The impact of hard structures on the seafloor is already visible outside the inlets where the high resolution bathymetry highlights the presence of large scours formed at the edges of semicircular breakwaters built between 2006 and 2011 as part of the MOSE project. The relative rapid erosive process could threaten the stability of the hard structures in the near future and should certainly be periodically monitored.


    Multibeam data acquisition

    The MBES raw data were collected during six-months (from May to December 2013) with a Kongsberg EM-2040 compact dual-head multi-frequency system. The survey areas, divided in 17 acquisition weeks, are not spatially contiguous because they were chosen depending on weather conditions and permit constraints. The MBES was pole-mounted on the CNR research vessel Litus, a 10-m-long boat with only 1.5-m-deep draft. The MBES has 800 beams (400 per swath) 1°×1°; the operational frequency for this survey was set at 360 kHz. A Seapath 300 system was used for ship positioning, supplied by a Fugro HP differential Global Positioning System (DGPS), accurate up to 0.2 m. The Kongsberg motion sensor MRU 5 and a Dual Antenna GPS integrated in the Seapath, corrected pitch, roll, heave and yaw movements (reaching 0.02° roll and pitch accuracy, and 0.075° heading accuracy). A Vale-port mini SVS sensor was attached close to the transducers to continuously measure the sound velocity for the beamforming. Sound velocity profiles (SVPs) were systematically collected (640 SVPs in total) with an AML oceanographic Smart-X sound velocity profiler (yellow dots in Fig. 2). Data were logged, displayed and checked in real-time by the Kongsberg data acquisition and control software SIS (Seafloor Information System). Professional topographers measured the offsets of the instruments with millimetric accuracy using a dedicated dimensional survey of the ship’s hull at dry dock.

    Several error sources may influence the multibeam data, giving errors in both real time presentation and final product. To avoid these errors, sensors have been calibrated (roll, pitch, time and heading offsets) and regularly checked. A 40% overlap between lines was kept in order to avoid the influence of external beams of bad quality given by residual errors in roll and sound speed profile measurements. The dual-head multibeam operated with a swath opening angle of 70° for each head inside the channels and 60° in the inlets, maintaining 15° of overlap between the two swaths. The vessel sailed with a reasonably constant speed (4 knots mean speed), despite strong tidal currents (and heavy ship traffic).

    Multibeam data processing


    CARIS HIPS and SIPS software (v.7 and 9.1)28 was used for processing multibeam data taking into account sound velocity profiles, tide corrections and manual quality control tools. The standard CARIS HIPS and SIPS workflow for bathymetry and BS data processing (Fig. 3) was followed. At the end of each week of acquisition at sea, a separate CARIS project was created, scoring totally 17 weeks of multibeam acquisition. The final combined surfaces (DTMs) with depths and BS are then divided into 17 parts referring to the acquisition week (Fig. 1). The bathymetry was created with the Swath Angles Weighting option with a Max Footprint size of 9×9 pixels and a resolution of 0.5 m and cleaned using the subset editor to handle and visualize efficiently the data (see Fig. 2 for the general DTM and Fig. 4 for an example of a DTM for bathymetry and BS mosaic).

    Figure 3: Workflow of the processing performed in CARIS for bathymetry and BS data.
    Figure 3
    Figure 4: Example of multi beam data processing outputs.
    Figure 4

    (a) DTM (0.5 m resolution and 5X vertical exaggeration) result of bathymetric data processing executed with CARIS HIPS and SIPS. The black arrow indicates the location of an alignment of wooden poles and amphorae dating back to Roman Times. (b) Example of BS-mosaic processed with CARIS HIPS and SIPS. The black arrow highlights the presence of artefacts.

    A set of 93 virtual tidal stations (see yellow stars in Fig. 5), evenly distributed in the study area, served for tidal correction: a virtual tidal station, was used for each field sheet of CARIS created for the data collected in a single day of survey. The tidal corrections in each virtual tidal station were calculated using the water level simulated by the hydrodynamic model SHYFEM29,30 applied to the whole Venice Lagoon with assimilation of tide gauge observations. All the corrections are referred to the local datum ‘Punta Salute 1897’. The Italian Hydrographic Institute reprocessed part of the bathymetric data (see Fig. 2) for the safety of navigation. Starting from the CARIS HIPS and SIPS projects, information about uncertainty of all experimental devices was computed into an uncertainty surface at 1-m-resolution, named Combined Uncertainty and Bathymetry Estimator (CUBE) surface. The CUBE surface provides multiple depth estimates for a single grid node, depending on the variation of the sounding data. The ‘Disambiguation’ tool was used to determine the best depth hypothesis at each node31 and to create the most accurate surface. This surface, completed with the information of horizontal and vertical propagated uncertainty, was vertically shifted to the mean low water spring datum and transferred into the database of the Italian Hydrographic Institute. The surface was then used for the official Italian nautical charts of the Lagoon32,​33,​34.

    Figure 5: Unstructured numerical mesh of the hydrodynamic model SHYFEM with the bathymetry interpolated over the mesh elements.
    Figure 5

    The red dots mark the location of the tide gauges (with ID according to Table 1) used in the model validation and the yellow stars indicate the location of the virtual tidal stations for the tidal correction procedure.

    Backscatter Data

    BS mosaics were created in CARIS HIPS and SIPS through the Geocoder engine. The Geocoder tool automatically corrects the system settings for transmission loss, insonification area and incidence angle variations35. Mosaics were generated using Angle Varying Gain (AVG) correction with a 300-pixel size window and Despeckle option in moderate mode to remove isolated pixels and improve the final intensity layer28. The same parameters were used for each mosaic generation. The bathymetric grids and BS mosaics were exported from CARIS with grid resolutions of 0.5 m as .txt and .geotiff files, respectively. The .txt files then were converted to 32-bit ESRI raster files using Global Mapper (v15). The raster files were imported into ArcGIS (v10.2)36 (ESRI 2015) for further analysis.

    Hydrodynamic model

    The hydrodynamic model SHYFEM developed by Umgiesser et al.29,30 was applied to correct the data for the tidal excursion and to simulate the water circulation of the lagoon. SHYFEM resolves the 3-D primitive equations vertically integrated over multiple z-layers and horizontally over an unstructured grid. The model is especially well suited to shallow-water areas. It has been successfully applied to the Venice Lagoon29,27 and to several other coastal systems30. The model uses a semi-implicit algorithm for integration in time. The spatial discretization of the unknowns is carried out with the finite element method, partially modified with respect to the classical formulation. The outcome is a grid that resembles a staggered grid often used in finite difference discretization.

    The boundary conditions for stress terms (wind stress and bottom drag) follow the classic quadratic parameterization. Heat fluxes are computed at the water surface. Water fluxes between air and sea consist of the precipitation and runoff minus evaporation computed by the SHYFEM model.

    Smagorinsky's formulation37 is used to parameterize the horizontal eddy viscosity. For the computation of the vertical viscosities, a turbulence closure scheme was used. This scheme is adapted from the k-ϵ module of GOTM (General Ocean Turbulence Model) described by Burchard and Petersen38. A detailed description of the 3-D model equations is given in Umgiesser et al.30.

    Computation of the water levels and currents

    The water circulation in the Venice Lagoon, induced by tide, wind, and water, heat and salt fluxes, was simulated by the unstructured model SHYFEM (described above, V7_1_4) applied over a spatial domain that represents the entire Lagoon and its adjacent shore. The model adequately reproduces the complex geometry and bathymetry of the Venice Lagoon using unstructured numerical meshes composed of triangular elements of variable form and size, going down to a few meters in the channels (Fig. 5). The water column is discretized into 22 vertical levels with progressively increasing thickness varying from 1 m for the upper 16 to 7 m for the deepest layer of the outer shelf. For the tidal excursion correction, the model bathymetry was obtained from the data collected in 2002 by Magistrato alle Acque di Venezia merged with later surveys. For the simulation of the tidal currents, the model integrated the 2002 dataset with the MBES bathymetry acquired by CNR-ISMAR in the main channels of the lagoon.

    The model was run in a 3-D baroclinic mode using observed forcing and boundary conditions (i.e., wind stress, heat and salt fluxes, precipitation, sea level and freshwater discharge) provided by the City of Venice through the Protezione CivileCentro Previsioni e Segnalazioni Maree, the Italian Institute for Environmental Protection and Research (ISPRA) and Magistrato alle Acque di Venezia (through THETIS spa).

    The simulated sea surface elevation to correct MBES bathymetric data for tidal oscillations was obtained by assimilating into the state of the hydrodynamic model the hourly water levels recorded at the tide gauges marked with red dots in Fig. 5. Data assimilation was performed through a calibrated nudging scheme which considers each station to have a weight function based on an isotropic Gaussian spatial distribution and a constant relaxation time. The simulated water levels extracted in correspondence of the 93 virtual tidal stations (yellow stars in Fig. 5) were used in the tidal correction procedure.

    Tidal currents have been computed by applying the model for both ebb and flood phases. The residual currents are obtained averaging the modelled currents over the one-year simulation (2014). Residual currents, induced by non-linear interactions between tides, wind and topography, in tidal embayment have been recognized as fundamental indicators of the net water movement and long-term sediment transport39.

    Code availability

    The open source hydrodynamic model SHYFEM is freely available at the webpages www.ismar.cnr.it/shyfem and https://github.com/SHYFEM-model/shyfem.

    Data Records

    The dataset of bathymetric data described in this paper is available on Marine Geoscience Data System (MGDS) (Data Citation 1: Marine Geosciences Data System http://dx.doi.org/10.1594/IEDA/323605). For the bathymetry a 0.5 m resolution DTM is provided as .ascii ESRI File format in 17 parts referring to date and time of the survey (divided into 17 weeks). For the BS data the mosaic for the most dynamical areas and the area surrounding the city of Venice (weeks 3 to 7, 9, 10, 16) is available in (Data Citation 2: Marine Geosciences Data System http://dx.doi.org/10.1594/IEDA/323853) at 0.5 m resolution as geotiff files. The raw bathymetric and BS data together with the SVP data are stored as. all and .asvp format in the Server, located at the CNR-ISMAR institute in Venice and are available upon request addressed to the first author of this paper. The raw data are archived following the acquisition date (survey week number and acquisition day). For each subset of data, a .xls table reports all the details about acquisition data that are useful for any data re-use or re-processing.

    The water current dataset which includes flood, ebb and residual velocity fields are archived in a public repository (Data Citation 3: PANGAEA https://doi.org/10.1594/PANGAEA.867918). The following files are contained in the archive SHYFEM_venice.zip: 1) SHYFEM_venice_flood.nc (unstructured netcdf file with the u/v components of the 3D flood velocity defined on the mesh node); 2) SHYFEM_venice_ebb.nc (unstructured netcdf file with the u/v components of the 3D ebb velocity defined on the mesh node); SHYFEM_venice_residual.nc (unstructured netcdf file with the u/v components of the 3D residual velocity defined on the mesh node).

    Technical Validation

    MBES bathymetry data quality

    A first general data quality assessment of the bathymetric data was carried out using IHO Standards for Hydrographic Surveys S-44, 2008. Total Propagated Uncertainty (TPU) was calculated in CARIS HIPS and SIPS 940, considering installation offsets, MBES characteristics, position uncertainties and timing errors. This value results from the combination of all individual error sources. TPU can be split into horizontal (hzTPU) and vertical (dpTPU) components, related to the positioning of each sounding and depth-values uncertainties. The final uncertainties are scaled to S44 confidence level (95%) (Caris 2009). Mean values obtained for the whole dataset are hzTPU=0.4 m and dpTPU=0.1 m (referred to 20 m depth), and fall within the Special Order IHO minimum standard (IHO S N°44, 2008).

    However, this assessment has some limitation since it refers to overall or average metrics. It gives better results for deeper waters and it may average out sharp transitions at the interface between two sections of survey, that in fact are present in some parts of the survey. Since the data were collected over an extended time frame (six months), they resulted as spatially ‘patchy’ with errors that could be related to the use of a discrete number of tidal stations for the tidal correction instead of a continuous real time kinematic system, that was not available at the time of the measurements. Anyway, the use of sea levels derived from a unique model application limits bathymetric artefacts that could emerge when using records of tide gauges having different reference datum.

    By visually investigating all fieldsheets created at the junction areas between different weeks, we found that the difference at the edge of the week areas ranges from about 0.5 to 15 cm. This error is not linked to the absolute water depth, since we have the same vertical error in 5 m and 10 m average water depth. The maximum standard deviation was found in a very small area close to the Lido Inlet (Fig. 6). In this area the effect of the patchiness is maximum due not only to tidal correction but probably also to high variability of the sound velocity profiles. In the inlets, different water masses mix and due to temperature and salinity changes the sound velocity can vary a few meters per second in a short distance. We tried to limit this error increasing the density of sound velocity profiles sampling in the inlets (Fig. 2) and using sound velocity correction tool in CARIS HIPS and SIPS.

    Figure 6: Example of visual evaluation of bathymetric data quality in the Lido Inlet.
    Figure 6

    (a) Bathymetry and (b) standard deviation error in an area of the Lido Inlet (see Fig. 2) where the weeks 2–5 overlap. The pink polygons indicate the different week surveys.

    We also observed an error related to imprecise heave compensation that is due to the slow adjustment of the MRU system when the boat is turning more than 90° rapidly. Although, we tried to minimize this effect by waiting at the start of new lines after turning for MRU to stabilise, the error is still present in some parts of the survey at the beginning of survey lines. This error was quantified experimentally with repeated survey to be at most equal to 10 cm. Another error source can be related to the sound velocity and diffraction in the outer beams as it can be seen in Fig. 6. Finally, the presence of suspended sediment and submerged aquatic vegetation could potentially affect the MBES bottom detection and, locally, the resulting bathymetry.

    MBES BS data quality

    In contrast to the bathymetric measurement, the BS data are the result of a complex interaction of the sonar echo with the water column and the seafloor. Therefore, more parameters need to be known or estimated to assess the error in BS data41,42:

    1. The amplitude of the acoustic signal projected into the water that depends on the transmission power. In our case the transmission power was set up automatically during the survey depending on the water depth and the projector angular directivity pattern of the instrument. Both of these parameters are taken into account automatically during the mosaic creation in Geocoder engine;

    2. The absorption and attenuation of acoustic energy that occurs in the travel of the acoustic wave through the water to the seafloor and back again. This energy loss depends on the signal-target range, on the physical properties of seawater (temperature and salinity versus depth) and on the signal frequency. During the experiments described below, we measured the influence of temperature and salinity fluctuations. We estimated that these factors could influence the results by no more than 0.5 dB.

    3. The inherent uncertainty due to variations of the sonar receiver to acoustic signals that in our case is ±1 dB43;

    4. Unwanted signal fluctuations. They were caused by the presence of air bubbles, schools of fishes and sediment suspension (less significant) in water column. All these elements can generate artifacts in the final BS mosaics. The bubbles influenced our data the most, reducing strongly the quality of BS data collected and, particularly, in the open sea outside the inlets of Lido and Chioggia. They were related either to turbulence in proximity of the transducers during surveys at rough sea or to presence of strong tidal currents, or of other boats navigating in the channels.

      The influence of sediment suspension on surface BS data is still not fully understood. To estimate this effect, in the experiment described below, we used water column BS data, ADCP and turbidity measurements. The physical interaction of the pulse with the seafloor is influenced by seafloor roughness, hardness, angular dependence effects, and the presence of a biogenic substrate.

    5. The corrections applied by the processing software.

    In order to assess the global fluctuation of the BS data related to these factors, two experiments were carried out with repeated MBES surveys in different parts of the lagoon: a) in the Lido Inlet44 (Fig. 7); b) in a very shallow navigation channel (La Bissa Channel) covered by submerged aquatic vegetation (SAV)45(Fig. 8).

    Figure 7: Variability of seafloor BS intensity over a tidal cycle in different areas of the Lido inlet.
    Figure 7

    (a) Map of the BS collected during one of the surveys of Experiment 1 in the Lido Inlet and values of the tide during the experiment; (b) boxplots extracted from the mosaics of the total surveyed area (white polygon); (c) of a flat area (blue polygon) and (d)of a ripple area (red polygon), respectively.

    Figure 8: Variability of seafloor BS intensity over a tidal cycle in the La Bissa channel.
    Figure 8

    (a) Map of the BS collected during one of the surveys of Experiment 2 in the La Bissa channel and values of the tide during the experiment; (b) boxplots extracted from the mosaics of the total surveyed area (white polygon); (c) of the bare bottom area (blue polygon) and (d)of the macroalgae area (red polygon), respectively.

    The experiment of the Lido Inlet was undertaken on the 12th September, 2014 between 0700 (GMT) and 1,700 (GMT) in a region of migrating megaripple fields (Fig. 7). A total of 22 repeated surveys were carried out with the MBES frequency set to 340 kHz and with more than 30% overlap between survey lines.

    The BS intensity distribution was extracted from each mosaic created from the MBES data following the workflow described before. We elaborated the data for the full area covered by all surveys (white polygon in Fig. 7) and for two subsets extracted in a flat area (blue polygon in Fig. 7) and a ripple area (red polygon in Fig. 7). We excluded the first survey from the analysis since its coverage area was too small. By comparing the distributions in the boxplots, we found that the variability of the average value of the BS intensity extracted by the mosaics falls within the Kongsberg EM2040 DC instrumental sensitivity range (±1 dB).

    During the experiment, we measured also concentrations of suspended sediment using turbidity meter, ADCP and Niskin bottles for calibration. We did not find any correlation between these concentrations variability over a time (range: 3–18 mg/l) and the surface BS.

    The experiment in the La Bissa Channel (described in detail in Kruss et al.45) was a 12 h experiment with 10 repeated surveys over a tidal cycle, one about every hour with 320 kHz of frequency. To estimate the variability of the seafloor BS intensity, also in this case, we show the BS intensity distribution over time as boxplots.

    The analysis was carried out for the mosaics of the full area and two testing areas of the channel. These areas were representative of two seafloor types: a) a bare bottom area; b) an area covered by macroalgae (Fig. 8). They were selected on the basis of dropframe video data collected on the experiment day. This analysis showed that there were no significant changes of the BS for the full area and the bare bottom area with variations of the median value falling within the interval of instrumental sensitivity. For the macroalgae area, instead, the median values of survey 2 and survey 7 differ by about 6 dB, well outside the instrumental sensitivity range. This is due to the fact that the data were collected during ebb and flood tide, respectively. The strong tidal currents influenced the distribution of the macroalgae and their density and orientation. This BS fluctuation is therefore related to a real change in the substrate properties.

    SHYFEM water level data quality

    The application of the SHYFEM model to the Venice Lagoon has been validated in previous works reproducing correctly the tidal propagation, the water flows in the three inlets and both the water temperature and salinity patterns29. Moreover, because the variations of sea level are of utmost importance for the correction of MBES data, extensive validation of numerical simulations against tide gauge data was performed. Through an iterative optimization procedure over a two-week hydrodynamic simulation, we calibrated the relaxation time (100 s) and the sigma distance of the Gaussian function (2,500 m) for the nudging assimilation scheme. Afterward, the hydrodynamic model was validated by comparing the numerical results with sea levels recorded in the lagoon (red dots in Fig. 5). The validation was performed by running 25 simulations of one month period in which the model assimilated the sea level data of all tide gauge stations except one station. For each simulation, the water levels computed in correspondence of the non-assimilated station were used to evaluate the model performance in reproducing the water level over the lagoon.

    The model results compare reasonably well with the measurements with an overall root mean square error (RMSE) of 2.1 cm and a correlation coefficient (R2) close to 1 in all stations (Table 1). The RMSE generally increases following the tidal propagation from the inlet to the inner lagoon, with the highest differences found in the distal parts of the lagoon (stations 1, 3, 9, 14, 18, 26). The difference between the mean of model results and the mean of observations varies in the range of±2 cm without a clear pattern. It has to be noted that the local tide gauges are affected by uncertainty in the vertical reference level. Therefore, the use of modelled sea level guarantees a uniform reference level throughout the lagoon basin.

    Table 1: Statistical analysis of simulated water levels

    Additional Information

    How to cite this article: Madricardo, F. et al. High resolution multibeam and hydrodynamic datasets of tidal channels and inlets of the Venice Lagoon. Sci. Data 4:170121 doi: 10.1038/sdata.2017.121 (2017).

    Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


    1. 1.

      & Paralic ecosystems. Biological organization and functioning. Vie et milieu 42, 215–251 (1992).

    2. 2.

      et al. The value of the world's ecosystem services and natural capital. Nature 387, 253–260 (1998).

    3. 3.

      et al. The value of estuarine and coastal ecosystem services. Ecol. Monogr. 81, 169–193 (2011).

    4. 4.

      & Tidal wetland stability in the face of human impacts and sea-level rise. Nature 504, 53–60 (2013).

    5. 5.

      Environmental threats and environmental future of estuaries. Environ. Conserv. 29, 78–107 (2002).

    6. 6.

      , & Eutrophication in shallow coastal bays and lagoons: the role of plants in the coastal filter. Mar. Ecol. Prog. Ser. 348, 1–18 (2007).

    7. 7.

      et al. A global map of human impact on marine ecosystems. Science 319, 948–952 (2008).

    8. 8.

      et al. Coastal eutrophication as a driver of salt marsh loss. Nature 490, 388–392 (2012).

    9. 9.

      , & Evolution of tidal creek networks in a high sedimentation environment: A 5-year experiment at Tijuana Estuary, California. Estuaries 28, 795–811 (2005).

    10. 10.

      , & Formation and evolution of a tidal channel network within a constructed tidal marsh. Geomorphology 151, 114–125 (2012).

    11. 11.

      The influence of wetland vegetation on tidal stream channel migration and morphology. Estuaries 3, 258–270 (1980).

    12. 12.

      , , & Landscape evolution in tidal embayments: modeling the interplay of erosion, sedimentation, and vegetation dynamics. J. Geophys. Res. Earth Surf. 112, F01008 (2007).

    13. 13.

      & Rapid response of tidal channel networks to sea-level variations (Venice Lagoon, Italy). Glob. Planet. Change 92, 191–197 (2012).

    14. 14.

      Applications of multibeam water column imaging for hydrographic survey. Hydrogr. J. 120, 3–15 (2006).

    15. 15.

      et al. Relationships between multibeam backscatter, sediment grain size and Posidonia oceanic seagrass distribution. Cont. Shelf Res. 30, 1941–1950 (2010).

    16. 16.

      et al. A multi-method approach for benthic habitat mapping of shallow coastal areas with high-resolution multibeam data. Cont. Shelf Res. 39, 14–26 (2012).

    17. 17.

      et al. Evaluation of seabed mapping methods for fine-scale classification of extremely shallow benthic habitats-Application to the Venice Lagoon, Italy. Estuar. Coast. Shelf Sc. 170, 45–60 (2016).

    18. 18.

      , , , & Sediment budget in the Lagoon of Venice, Italy. Cont. Shelf Res. 30, 934–949 (2010).

    19. 19.

      , & Morphological evolution of the Venice Lagoon: Evidence from the past and trend for the future. J. Geophys. Res. 114, F04002 (2009).

    20. 20.

      , , , & Thirty-year changes (1970 to 2000) in bathymetry and sediment texture recorded in the Lagoon of Venice sub-basins, Italy. Mar. Geol. 258, 115–125 (2009).

    21. 21.

      , , & Estimating sediment transport from acoustic measurements in the Venice Lagoon inlets. Cont. Shelf Res. 30, 883–893 (2010).

    22. 22.

      , , & Global change and relative sea level rise at Venice: what impact in term of flooding. Clim. Dyn. 35, 1039–1047 (2010).

    23. 23.

      , & Natural versus anthropogenic subsidence of Venice. Scient. Rep. 3, 2710 (2013).

    24. 24.

      et al. The 1966 flooding of Venice: what time taught us for the future. Oceanography 29, 178–186 (2016).

    25. 25.

      & Are inlets responsible for the morphological degradation of Venice Lagoon? J. Geophys. Res. 111, F03013 (2006).

    26. 26.

      , , & Changes in Venice Lagoon dynamics due to construction of mobile barriers. Coast. Eng. 57, 694–708 (2010).

    27. 27.

      , , , & Tidal changes in a heavily modified coastal wetland. Cont. Shelf Res. 101, 22–33 (2015).

    28. 28.

      CARIS HIPS and SIPS. User Guide v8.1 (2013).

    29. 29.

      , , & A finite element model for the Venice Lagoon. Development, set up, calibration and validation. J. Mar. Sys. 51, 123 (2004).

    30. 30.

      et al. Comparative hydrodynamics of 10 Mediterranean lagoons by means of numerical modeling. J. Geophys. Res. Oceans 119, 2212–2226 (2014).

    31. 31.

      & CUBE User’s Manual, version 1.13, 1–54 (2007).

    32. 32.

      Italian Hydrographic Institute, Nautical Chart 226. Venezia—Porto di Lido (2016).

    33. 33.

      Italian Hydrographic Institute, Nautical Chart 223. Porto di Malamocco e Darsena San Leonardo (2016).

    34. 34.

      Italian Hydrographic Institute, Nautical Chart 220. Porto di Chioggia (2016).

    35. 35.

      & Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data. Mar. Geophys.l Res. 28, 119–126 (2007).

    36. 36.

      ESRI 2015. ArcGIS Desktop: Release 10.2. Environmental Systems Research Institute (2015).

    37. 37.

      General circulation experiments with the primitive equations. The basic experiment. Monthly Weather Review 91, 99–152 (1963).

    38. 38.

      & Models of turbulence in the marine environment—a comparative study of two equation turbulence models. J. Mar. Sys. 21, 29–53 (1999).

    39. 39.

      & Morphodynamics of tidal inlet systems. Ann. Rev. Fluid Mech. 41, 203–229 (2009).

    40. 40.

      , & Accuracy estimation of Canadian Swath (multibeam) and Sweep (multi-transducer) sounding system. Technical report, Canadian Hydrographic Service, 1–95 (1995).

    41. 41.

      An Introduction To Underwater Acoustics: Principles And Applications 2nd edn. Springer, New York (2010).

    42. 42.

      & Backscatter measurements by seafloor-mapping sonars. Marine Geological and Biological Habitat Mapping. vol Geohab Report (2015)

    43. 43.

      Backscattering and Seabed Image Reflectivity, Kongsberg EM Technical Note (2000).

    44. 44.

      et al., Sediment transport at a tidal inlet: the case of the Lido Inlet, Venice, Italy, ECSA 55 Unbounded boundaries and shifting baselines: Estuaries and coastal seas in a rapidly changing world (Estuarine Coastal Sciences Association, London UK, 2015) .

    45. 45.

      , , , & Assessment of submerged aquatic vegetation abundance using multibeam sonar in very shallow and dynamic environment. The Lagoon of Venice (Italy) case study. Pro. of Acoustics in Underwater Geosciences Symposium (RIO Acoustics), IEEE/OES 2015 (Rio de Janeiro, Brazil, 2015).

    Download references

    Data Citations

    1. 1.

      Madricardo, F., Foglini, F., & Trincardi, F. Marine Geosciences Data System http://dx.doi.org/10.1594/IEDA/323605 (2016)

    2. 2.

      Madricardo, F., Foglini, F., & Trincardi, F. Marine Geosciences Data System http://dx.doi.org/10.1594/IEDA/323853 (2016)

    3. 3.

      Ferrarin, C., & Umgiesser, G. PANGAEA https://doi.org/10.1594/PANGAEA.867918 (2016)


    The authors would like to acknowledge the crew of the research vessel Litus for their skilful help during the survey. This work was supported by the National Flagship Project RITMARE, funded by MIUR, the Italian Ministry of Education, University and Research. The authors wish to thank the Italian Institute for Environmental Protection and Research (ISPRA), Protezione CivileCentro Previsioni e Segnalazioni Maree of the Municipality of Venice and Magistrato alle Acque di Venezia for providing forcing and boundary conditions data needed by the hydrodynamic model application.

    Author information


    1. Consiglio Nazionale delle Ricerche, Istituto di Scienze Marine (CNR-ISMAR), Venezia, Castello 2737/f, Venice 30122, Italy

      • Fantina Madricardo
      • , Aleksandra Kruss
      • , Christian Ferrarin
      • , Marco Bajo
      • , Debora Bellafiore
      • , Stefano Fogarin
      • , Erica Keppel
      • , Giuliano Lorenzetti
      • , Francesco Maicu
      • , Giacomo Montereale Gavazzi
      • , Tiziano Minuzzo
      • , Antonio Petrizzo
      • , Federica Rizzetto
      • , Alessandro Sarretta
      • , Marco Sigovini
      • , Georg Umgiesser
      •  & Fabio Trincardi
    2. Consiglio Nazionale delle Ricerche, Istituto di Scienze Marine (CNR-ISMAR), Bologna, Via Gobetti, 101, Bologna 40129, Italy

      • Federica Foglini
      • , Elisabetta Campiani
      • , Valentina Grande
      • , Elisa Leidi
      • , Vittorio Maselli
      • , Alessandra Mercorella
      • , Claudio Pellegrini
      • , Mariacristina Prampolini
      • , Alessandro Remia
      •  & Marzia Rovere
    3. Istituto Idrografico della Marina, Passo all’Osservatorio 4, Genova 16134, Italy

      • Nicola Marco Pizzeghello
      • , Chiara Murri
      • , Monica Rossi
      •  & Luigi Sinapi
    4. Institute of Oceanography, University of Gdansk, al. Marszalka Pilsudskiego 46, Gdynia 81-378, Poland

      • Lukasz Janowski
    5. Smithsonian Environmental Research Center (SERC), 647 Contees Wharf Road, Edgewater, Maryland 21037, USA

      • Erica Keppel
    6. Department of Geology and Petroleum Geology, University of Aberdeen, King's College, Aberdeen AB24 3FX, Scotland

      • Vittorio Maselli
    7. Royal Belgian Institute of Natural Sciences, Operational Directorate Natural Environment Gulledelle 100, Brussels 1200, Belgium

      • Giacomo Montereale Gavazzi
    8. Renard Centre of Marine Geology, Department of Geology and Soil Science, Ghent University, Krijgslaan 281 s.8, B-9000 Gent, Belgium

      • Giacomo Montereale Gavazzi
    9. Open Access Centre for Marine Research, Klaipėda University, H. Manto 84, Klaipėda 92294, Lithuania

      • Georg Umgiesser


    1. Search for Fantina Madricardo in:

    2. Search for Federica Foglini in:

    3. Search for Aleksandra Kruss in:

    4. Search for Christian Ferrarin in:

    5. Search for Nicola Marco Pizzeghello in:

    6. Search for Chiara Murri in:

    7. Search for Monica Rossi in:

    8. Search for Marco Bajo in:

    9. Search for Debora Bellafiore in:

    10. Search for Elisabetta Campiani in:

    11. Search for Stefano Fogarin in:

    12. Search for Valentina Grande in:

    13. Search for Lukasz Janowski in:

    14. Search for Erica Keppel in:

    15. Search for Elisa Leidi in:

    16. Search for Giuliano Lorenzetti in:

    17. Search for Francesco Maicu in:

    18. Search for Vittorio Maselli in:

    19. Search for Alessandra Mercorella in:

    20. Search for Giacomo Montereale Gavazzi in:

    21. Search for Tiziano Minuzzo in:

    22. Search for Claudio Pellegrini in:

    23. Search for Antonio Petrizzo in:

    24. Search for Mariacristina Prampolini in:

    25. Search for Alessandro Remia in:

    26. Search for Federica Rizzetto in:

    27. Search for Marzia Rovere in:

    28. Search for Alessandro Sarretta in:

    29. Search for Marco Sigovini in:

    30. Search for Luigi Sinapi in:

    31. Search for Georg Umgiesser in:

    32. Search for Fabio Trincardi in:


    F.M., F.F. and A.K. wrote most of the paper and organized, coordinated and personally contributed to the acquisition and processing of the MBES data and to the organization of the database. C.F. contributed to the writing of the paper and applied the hydrodynamic model SHYFEM to the V.L. to produce the current fields and tidal correction data. N.M.P., M.R., C.M. and L.S. validated the bathymetric dataset for the areas included in the IIM cartography and wrote the description of the CUBE validation. E.C. developed the processing protocol, participated to the data acquisition and contributed to process the MBES data and to the structuring of the geodatabase. V.G. participated to acquisition and designed the geodatabase for storing the data. A.M. and A.P. participated both in acquisition and processing of the MBES data. M.B., D.B., G.L., F.M., C.P., A.R., F.R., M.R., M.S., V.M. participated to the acquisition of the MBES data. S.F., L.J., E.K., E.L., A.M., G.M.G., M.P., A.S. participated to the processing of the MBES data. T.M. was responsible for the MBES data storage and back up. G.U. developed the finite element hydrodynamic model SHYFEM and contributed to produce the water levels for tidal correction and the current fields. F.T. conceived the idea, contributed to the writing of the paper and supervised the work in all its phases.

    Competing interests

    The authors declare no competing financial interests.

    Corresponding authors

    Correspondence to Fantina Madricardo or Fabio Trincardi.

    Creative Commons BYOpen Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ The Creative Commons Public Domain Dedication waiver http://creativecommons.org/publicdomain/zero/1.0/ applies to the metadata files made available in this article.