Abstract
Deterministic magnetization switching using spinorbit torque (SOT) has recently emerged as an efficient means to electrically control the magnetic state of ultrathin magnets. The SOT switching still lacks in oscillatory switching characteristics over time, therefore, it is limited to bipolar operation where a change in polarity of the applied current or field is required for bistable switching. The coherent rotation based oscillatory switching schemes cannot be applied to SOT, because the SOT switching occurs through expansion of magnetic domains. Here we experimentally achieve oscillatory switching in incoherent SOT process by controlling domain wall dynamics. We find that a large fieldlike component can dynamically influence the domain wall chirality which determines the direction of SOT switching. Consequently, under nanosecond current pulses, the magnetization switches alternatively between the two stable states. By utilizing this oscillatory switching behavior, we demonstrate a unipolar deterministic SOT switching scheme by controlling the current pulse duration.
Introduction
Magnetism plays a key role in modern data storage and advanced spintronics devices as nonvolatile information can be encoded in the magnetization state of a nanoscale magnet. Over the last two decades, electrical methods to control the magnetization state have received immense research attention to meet the demand for the reduction in the size and energy consumption of magnetic storage cells and devices. As a result, remarkable developments have been made in switching the magnetization electrically using spintransfer torque (STT)^{1,2,3,4,5}, electric field^{6,7,8,9,10}, and the recently discovered spinorbit torque (SOT)^{11,12,13,14,15}. The operation principle of majority of these electrical techniques is based on the control of the polarity of the external force, such as an electric current or magnetic field, to achieve switching between two magnetic states (bipolar switching techniques).
On the other hand, magnetization switching techniques with a fixed polarity of the external force (unipolar operation) are receiving immense attention because of their scientific interest, as well as their potential to significantly increase the scalability of spintronics devices by replacing transistors with diodes^{10, 16}. It is possible to achieve unipolar magnetization switching by exploiting the temporal evolution of magnetization switching, or, in other words, the magnetization dynamics. For example, in the context of STT or electric fieldinduced magnetization switching, unipolar operation was previously demonstrated^{7, 9, 16,17,18,19} by driving the magnetization into coherent precessional motion between the two stable states and then precisely controlling the time duration for which the external force of fixed polarity was applied. As the time varying magnetization trajectory oscillates between the two potential minima (stable states), switching was accomplished by removing the external force at the appropriate time to release the magnetization at the desired final state. This oscillatory behavior was also theoretically predicted in the SOT driven switching^{20, 21}. However, it must be emphasized that the above described oscillatory switching scheme for unipolar operation requires strong coherency of the magnetic moments or, in other words, the magnetization should be kept uniformly aligned throughout the rotational switching process. The coherency of the magnetization is very sensitive to thermal agitations^{22} and also relatively weak^{23,24,25} in magnetic structures with perpendicular magnetic anisotropy (PMA) which are required for highdensity applications.
Here we report our experimental discovery of an alternative method to achieve the oscillatory switching behavior in the scenario of incoherent magnetization switching in PMA structures driven by SOT. The SOT is an electric currentinduced phenomenon that utilizes spin currents generated by spin–orbit interactions to efficiently manipulate and switch the magnetization of an ultrathin magnet^{11,12,13,14,15}. While its microscopic origin is still controversial^{26,27,28,29}, SOT is known to be composed of two components, namely, the dampinglike torque (DLT), \(\tau _{{\mathrm{DLT}}}{\mathrm{\sim }}\hat m{\mathrm{ \times }}\left( {\hat m{\mathrm{ \times }}\hat y} \right)\) and the fieldlike torque (FLT), \(\tau _{{\mathrm{FLT}}}\sim \hat m \times \hat y\). Here, \(\hat m\) and \(\hat y\) indicate the direction of the magnetization of the ultrathin magnet and the spin polarization of the incoming spin current, respectively. When substantial magnetization is orthogonal to \(\hat y\), the DLT and FLT can be considered as equivalent field with \(\hat m \times \hat y\) symmetry (H_{DLT}) and \(\hat y\) symmetry (H_{FLT}), respectively^{30}.
Unless the lateral dimensions of the ultrathin magnet are extremely small (< 40 nm), the SOT induced magnetization switching in PMA structures is an incoherent process^{31}. In the incoherent regime, the switching happens by depinning of a reversed magnetic domain followed by its expansion^{24, 30,31,32,33,34,35}. Due to the torque symmetries, the general consensus till now is that the DLT is responsible to drive the domain expansion in SOT switching^{30} and the role of FLT in deterministic switching is usually neglected and not well understood^{25, 30}. On the contrary, our studies reveal that in PMA structures with large FLT, the SOT driven incoherent magnetization dynamics and the deterministic switching are greatly influenced by FLT.
Results
Nanosecond pulse currentinduced SOT switching
We explore the SOT driven magnetization switching dynamics under the application of nanosecond current pulses in Ta/CoFeB/MgO structures, whose FLT is large and is of opposite sign to that of DLT^{27, 36} (FLT/DLT = –3.2, see Methods section for our sign conventions). As shown in Fig. 1a, a perpendicularly magnetized circular dot with a 1000 nm diameter (d) was patterned on top of the Ta channel. The electric current pulses are applied along the +xdirection and an inplane assist field (H) is applied in the xyplane where its inplane angle (θ_{ H }) is defined with respect to the +xaxis. The applied H is along the –xdirection (θ_{ H } = 180°) unless otherwise specified. The details of device preparation and measurement are described in Methods section.
In order to study the SOT switching dynamics, we have measured the probability of magnetization switching by applying current pulses with the initial state of the magnetization as ‘up’ (+zdirection). Figure 1b shows the two dimensional diagram of the measured switching probability (P_{sw}) as a function of current density (J) and pulse duration (t) at a fixed H = 1191 Oe. We have also measured the P_{sw} vs. t for different H while keeping a constant value of J (79.4 × 10^{6} A cm^{−2}) as shown in Fig. 1c. Under the application of the current pulses, a clear ‘up’ to ‘down’ SOT switching is observed as indicated by the transition of P_{sw} from 0 to 100%. This first switching boundary (where P_{sw} = 50%) between the initial state and forward switching is monotonic with respect to J, t, and H, suggesting that the forward switching is more likely to occur with a larger J, a longer t or a larger H, which is expected from torque driven SOT magnetization switching dynamics as observed before^{24, 31}. Moreover, the ‘up’ to ‘down’ switching direction is also consistent with the previous experiments and also with that of DCcurrentinduced SOT switching in our devices (Supplementary Note 1 and 2). By performing a linear fit of the critical switching current density (at the first switching boundary) with corresponding values of 1/t, we estimate the intrinsic critical switching current density (J_{c0}) in our devices as 43.2 × 10^{6} A cm^{−2} (Supplementary Note 3). This value of J_{c0} is significantly smaller than the calculated value of 148 × 10^{6} A cm^{−2} from the macrospinlike coherent switching model (Methods section for details), suggesting that the switching in our device occurs via expansion of reversed domain^{24, 30,31,32,33,34,35} rather than coherent magnetization rotation, which is also expected from the size of the studied structure.
Oscillatory switching behavior induced by FLT
Beyond the first switching boundary, the P_{sw} is expected to remain at 100% and does not change, since the existing theories and experimental results indicate that the DLT driven incoherent SOT switching is a deterministic process^{24, 30, 31}. On the contrary, as seen in Fig. 1b, c, if we apply a pulse with a longer t, a backward switching boundary appears where the magnetization flips back from ‘down’ to its initial ‘up’ state. This unexpected backward switching observed in our devices, for a wide range of J, t, and H, is also a spin torque driven process, since the backward switching boundary also shows a monotonic behavior with J, t, and H. On applying a longer t beyond the backward switching, the magnetization undergoes forward switching again (from ‘up’ to ‘down’ state) resulting in an oscillatory behavior of P_{sw}. We note that the backward switching and the oscillatory behavior are observed regardless of the initial magnetization states (‘up’ and ‘down’, Supplementary Note 4).
The occurrence of oscillatory P_{sw} is surprising because the SOT switching in our devices proceeds by domain expansion unlike the previous reports where the switching takes by coherent magnetization rotation^{7, 9, 16–17, 18,19,20,21} Furthermore, the signature of incoherent switching in our devices can be also observed in the oscillatory period of P_{sw}. In the case of coherent switching (Supplementary Note 5), the oscillatory period of P_{sw} is quite symmetric as it arises from the precessional motion with a constant frequency (~ Larmor frequency). On the other hand, the observed periods in our study are distinctly asymmetric as the observed period for the backward switching is much longer than that for the first forward switching. For instance, the periods of the first forward switching and backward switching are ~2.7 ns and ~7.5 ns, respectively, for an applied J of 79.4 × 10^{6} A cm^{−2} and H of 1191 Oe, which are indicated by dashed arrows in Fig. 1b.
In order to obtain more insights on the backward switching, we have measured P_{sw} for different θ_{ H } as shown in Fig. 1d. Interestingly, the observed ‘down’ to ‘up’ backward switching exhibits significant asymmetric behavior with respect to θ_{ H }, compared to the ‘up’ to ‘down’ forward switching. The backward switching is suppressed or enhanced, as the H is tilted towards (θ_{ H } < 180°) or away from (θ_{ H } > 180°) the +ydirection, respectively. This asymmetric behavior implies that an equivalent field with ysymmetry gives rise to the observed backward switching, and this ysymmetry coincides with the direction of H_{FLT}. The harmonic Hall voltage measurements in the Ta/CoFeB/MgO structure have shown that a large H_{FLT} exists in the –ydirection when a positive current (along the +xdirection) is applied^{27, 36}. The observed backward switching in Fig. 1d is suppressed when the effective H_{FLT} is reduced by applying an external transverse field along the +ydirection (θ_{ H } < 180°) opposite to the SOT induced H_{FLT} (along the –ydirection). Therefore, the contributions of FLT play a dominant role in breaking the determinism in SOT switching dynamics and thus should not be neglected. Complete suppression of the backward switching under titled H toward the +ydirection is observed in another device (Supplementary Note 6). Furthermore, the backward switching or the oscillatory switching behavior is not observed in the Pt layer based device which exhibits a small FLT/DLT ratio of −0.5 (Supplementary Note 7).
We have then estimated and compared the domain wall (DW) velocity during the first forward and backward switching processes. The mean DW velocity (V_{DW}) during the forward switching is estimated using the relation, \(V_{{\mathrm{DW,fwd}}}{\mathrm{ = }}d{\mathrm{/}}\left( {2t_{{\mathrm{c,fwd}}}} \right)\) with an assumption of SOT switching occurs by reverse domain nucleation at one corner followed by its expansion across the PMA dot^{30, 32, 33, 35}. Here, t_{c,fwd} represents the time corresponding to P_{sw} = 50% during the first forward switching. V_{DW,fwd} is estimated only in the relatively large J regime (J > J_{c0}), where the spintorque is dominant over the thermal activation^{24, 37}. As shown in Fig. 2a, the estimated V_{DW,fwd} shows a proportional increase with an increase in J, and we obtain a V_{DW,fwd} of 504 m s^{−1} for J = 10^{8} A cm^{−2} and H = 1191 Oe, which is in agreement with the reported value under a large longitudinal field^{38}. Figure 2b shows that the V_{DW} increases with an increase in the magnitude of H which can be understood as follows. As H increases, the magnetization at the center of the domain wall (M_{ DW }) is better aligned toward the H direction (–xdirection). Subsequently, the outofplane H_{DLT} (\(\propto {\mathbf{M}}_{{\mathbf{DW}}} \times \hat y \propto x{\mathrm{ component}} \,{\mathrm{of}} \, {\mathbf{M}}_{\mathbf{DW}}\)) exerted on the DW also increases leading to a larger V_{DW}^{14, 30}. Figure 2c shows the V_{DW,fwd} as a function of the transverse component (y component) of the applied H (top axis). The corresponding FLT_{eff}/DLT ratio is indicated in the bottom axis, which is defined from the following relation: \(\left( {H_{{\rm FLT}}\left( J \right)  H\,{\mathrm{cos}}\theta _H} \right){\mathrm{/}}H_{{\rm DLT}}\left( J \right)\). Here, H_{DLT}(J) and H_{FLT}(J) are the corresponding SOT fields at a given current density which are measured from the harmonic technique (Supplementary Note 8). The asymmetric behavior of V_{DW,fwd} with respect to the transverse component of H arises due to M_{ DW } being pulled away (into) the Néel wall configuration resulting in decrease (increase) of the H_{DLT} experienced by the DW^{14}.
Similarly, we have determined the V_{DW} during the observed backward switching using the relation, \(V_{{\mathrm{DW,bck}}} = d/2\left( {t_{{\mathrm{c,bck}}}  t_{{\mathrm{c,fwd}}}} \right)\), as the backward switching follows the first forward switching in time. The t_{c,bck} represents the time corresponding to P_{sw} = 50% during the backward switching. Interestingly, the estimated V_{DW,bck} also shows monotonic increase with respect to J and H (Fig. 2a, b) and an asymmetric behavior as a function of θ_{ H } (Fig. 2c), implying that the backward switching also arises from the spin torque driven domain expansion similar to the case of the first forward switching but in an opposite manner. However, V_{DW,bck} is smaller than V_{DW,fwd} because the domain expansion in the backward switching is energetically unfavorable as discussed later.
Onedimensional micromagnetics simulations of domain walls
In order to understand the experimental observations and elucidate the role of FLT in the oscillatory P_{SW}, we have performed onedimensional (1D) micromagnetics simulations of the SOT switching driven by domain expansion (Methods section for details). The top panel of Fig. 2d shows the SOT induced temporal evolution of averaged outofplane magnetization (m_{z}) as a function of the FLT/DLT ratio, where the value of DLT is kept constant. At the start of the simulation (0 ns), a reversed ‘down’ domain is introduced at one edge of the structure. This reversed domain is then expanded by SOT as the simulation proceeds. In the case where there is no FLT, the SOT successfully switches the magnetization to ‘down’ (m_{z} = –1) state. However, when a large FLT is considered (FLT/DLT = –4.8), the 1D model also reproduces the backward switching behavior as the m_{z} returns back to a positive value after the forward switching. This backward switching behavior is gradually suppressed with decreasing the magnitude of the FLT/DLT ratio, which is consistent with the experimental observation. Figures 2e–g show the calculated V_{DW} during the forward and backward switching as a function of J, H, and FLT/DLT ratio, respectively. The calculated and experimentally determined V_{DW} also show good qualitative agreement as the monotonic behavior with respect to H and J, asymmetric behavior with respect to the FLT/DLT ratio and the slower velocity during backward switching are reproduced.
The bottom panel of Fig. 2d shows the temporal evolutions of azimuthal angle of DW (θ_{DW}), which is the angle between M_{ DW } and +xdirection. The evolution of θ_{DW} for the different ratios of FLT/DLT sheds light on the key role of FLT on the domain expansion in the opposite direction and the resultant backward switching. At the start of simulation, due to the applied H, the xcomponent of M_{ DW } is along the –xdirection and thus θ_{DW} = 180°. Under the application of SOT, the reversed domain expands and θ_{DW} gradually decreases to 90° as M_{ DW } damps toward the spin polarization direction^{39}. For the case without FLT (FLT/DLT = 0), the DW annihilates as it expands to the structure edge (m_{z} = –1) which results in M_{ DW } and thus θ_{DW} not being well defined. However, when a sizeable FLT of opposite sign to DLT is considered, θ_{DW} exhibits an oscillatory behavior over time, which indicates that the DW does not immediately annihilate after it reaches the structure edge. Further, it is observed that the time for which θ_{DW} is stable below 90° increases with increasing the magnitude of FLT and as we explain in the following paragraph, whenever the value of θ_{DW} < 90° (M_{ DW } in the +xdirection), the SOT drives the backward switching. This result indicates that the FLT facilitates backward switching by stabilizing θ_{DW} < 90°.
The physics behind the FLT induced oscillatory behavior of θ_{DW} and the resultant backward switching is illustrated in Fig. 3 using the DW configuration, M_{ DW } orientation, and torques acting on M_{ DW } at different times. Time 1 corresponds to the case for ‘up’ to ‘down’ forward switching process when the xcomponent of M_{ DW } is stabilized along –xdirection (\({\mathbf{M}}_{{\mathbf{DW}}} \cdot {\hat{\mathbf x}} < 0\)). Consequently, the DW experiences an outofplane H_{DLT} in the –zdirection (\({\mathbf{M}}_{{\mathbf{DW}}} \times {\hat {\mathbf y}} < 0\)) and the ‘down’ domain expands to advance the forward switching process. Time 2 corresponds to the case when the propagating DW reaches the structure edge and annihilates. However, this annihilation process is followed by a nucleation of a DW with an inverted chirality (\({\mathbf{M}}_{{\mathbf{DW}}} \cdot {\hat {\mathbf x}} > 0\)) which can be understood as a reflection of the DW on the structure edge^{40, 41}. This DW with an inverted chirality is not energetically favorable and follows damped motion over time to revert back its chirality due to the applied H along the –xdirection. However, a sufficiently large H_{FLT} in the –ydirection can give dynamic stability to the DW with inverted chirality with a lifetime of several nanoseconds. As this metastable DW’s center is along the +xdirection, it experiences a H_{DLT} in the +zdirection (\({\mathbf{M}}_{{\mathbf{DW}}} \times {\hat {\mathbf y}} > 0\)), therefore the ‘up’ domain expands, as shown in time 3, which results in the backward switching. Over time, the metastable DW recovers back its chirality with its M_{ DW } again pointing back to the –xdirection which proceeds to switch the magnetization again in the forward direction and the whole cycle repeats giving rise to the oscillatory behavior in P_{sw}. The velocities of the two switching processes are different since the inverted DW configuration during the backward switching is in an energetically unfavorable state as the applied external H is against M_{ DW }. Furthermore, the attained metastability of the reversed DW decreases over time and eventually only the forward switching will prevail. As a result, the backward switching can be observed only in the nanosecond timescale.
Although the DW chirality and the resulting domain expansion are discussed in terms of H and H_{FLT}, it is known that the other effects, such as DzyaloshinskiiMoriya interaction (DMI) may also influence the DW chirality. It is reported that the DMI plays a central role in the case of SOT driven DW displacement, as it determines the DW chirality and the sign of outofplane H_{DLT} experienced by DW^{14, 38, 42, 43}. However, in the case of SOT driven switching, the DW chirality is reported to be governed largely by the applied H, as it overcomes the DMI effective field^{30, 43}. In the studied structure, the DMI effective field is estimated as 103 Oe (see Methods section for details) and is quite smaller than the H (550 ~ 1200 Oe) and H_{FLT} (1257 Oe per 79.4 × 10^{6} A cm^{−2}, Supplementary Note 8) applied in the experiments and simulations. Therefore, we believe that the DW chirality during the forward and backward switching is dominantly governed by H and H_{FLT}.
Unipolar SOT switching
Finally, utilizing the observed oscillatory characteristics, we show a deterministic unipolar SOT switching scheme which reversibly controls the magnetization configuration under a constant J and H of a fixed polarity and changing t only. This is demonstrated using a series of current pulses with alternating lengths of 2.5 ns and 7.5 ns with a fixed current density of 79.4 × 10^{6} A cm^{−2} under a constant H of 1067 Oe. After each pulse injection, the magnetization state is monitored using the anomalous Hall resistance (R_{AHE}) measurement. As shown in Fig. 4, the deterministic SOT switching consistently occurs by the unipolar current pulses. The initial state of the magnetization is pointing ‘up’ and the pulse of 2.5 ns always switches the magnetization to ‘down’, while the magnetization is always brought to ‘up’ state with the pulse of 7.5 ns.
Discussion
The role of FLT has not been paid much attention in the majority of SOT switching experiments and thus, the SOT switching and domain wall dynamics have been mainly discussed using the DLT alone. The FLT was claimed to induce a partial decrease in the SOT switching probability (decreased to ~60% after achieving full 100% switching)^{44}. However, another work reported a similar backward SOT switching that was attributed to a small tilt of inplane assist field along the outoffield direction^{45}. With these two different interpretations, the role of FLT in SOT dynamics and the underlying physics of the backward SOT switching still remain vague. In this regard, our experiments bring to light the crucial role of FLT in breaking the determinism in SOT driven incoherent switching dynamics which results in oscillatory magnetization switching characteristics with respect to the current pulse duration. We make use of this observed oscillatory behavior to demonstrate a unipolar deterministic SOT switching scheme which operates by controlling the duration of the current pulses, while keeping the magnitudes and polarities of the current and the assistfield constant. Our study provides the missing piece in the physics of SOT switching dynamics and offers novel strategies for magnetization switching with unipolar operation.
Methods
Sample preparation and measurements
The film structure of Ta (6 nm)/Co_{40}Fe_{40}B_{20} (0.9 nm)/MgO (2 nm)/SiO_{2} (3 nm) on a Si/SiO_{2} substrate is prepared by magnetron sputtering (base pressure <1 × 10^{−8} Torr) and annealed at 200 °C for 30 min to improve PMA. The structure is subsequently patterned into a CoFeB circular dot with a 1000 nm diameter on top of the Ta Hall cross using electron beam lithography and Ar ion etching. The negative tone electronbeam resist of maN 2403 with fine resolution of 5 nm was used for patterning the Hall cross and the circular dot. The electrodes were prepared using positive tone electronbeam resist of PMMA 950 and deposition of Ta (5 nm)/Cu (100 nm). The Ta channel surface is cleaned using Ar ion etching prior to electrode deposition for Ohmic contact. The thickness of the Ta channel after fabrication is ~3.5 nm, estimated from channel resistance measurements. The films have a saturation magnetization of M_{s} = 670 emu cm^{−3} and an effective anisotropy field H_{k,eff} = 3000 Oe measured using vibrating sample magnetometer.
DC and nanosecond current pulses are applied in the Ta channel through a biastee and the perpendicular magnetization state is measured from the anomalous Hall resistance. The current pulse has a rise time of ~70 ps and a fall time of ~80 ps, and its magnitude is determined by measuring the transmitted signal. The switching probability under current pulses is obtained from the following procedure: we applied a negative reset DCcurrent of 1.5 mA to initialize the magnetization to ‘up’ state followed by a positive current pulse for SOT switching. A few seconds after each pulsed current, the anomalous Hall resistance is measured using a lowDC current of +70 μA to sense the magnetization state. Individual current pulse injections with a fixed amplitude J and duration t were repeated 20 times to determine the switching probability which is defined as P_{sw} = (number of ‘down’ states)/20.
We studied a total of 9 devices with varying the dot diameter and ferromagnet thickness. Every device showed the backward switching with quantitative difference in the switching phase diagram that is attributed to the deviation in effective anisotropy and depinning sites.
Intrinsic switching current density from the macrospin switching model
The intrinsic switching current density from the macrospinlike rotation switching model is calculated^{46} using eq. 1.
This rotational switching model gives J_{c0} of 148 × 10^{6} A cm^{−2} using parameters of the saturation magnetization M_{s} = 670 emu cm^{−}^{3} (from VSM measurement), the perpendicular anisotropy H_{k,eff} = 3000 Oe (from VSM measurement), the ferromagnetic layer thickness t_{F} = 0.9 nm, spin Hall angle θ_{ H } = 0.09, and inplane assist field H_{ x } = 1191 Oe.
1D model calculation
Micromagnetics simulations are carried out by numerically solving the Landau–Lifshitz–Gilbert equation^{47} including the dampinglike and fieldlike component of spinorbit torque:
where \(\tau _{{\rm DLT}}{\mathrm{ = }}c_{{\rm DLT}}\left( {\hbar J} \right){\mathrm{/}}\left( {2eM_{\rm s}d} \right)\) and \(\tau _{{\rm FLT}}{\mathrm{ = }}c_{{\rm FLT}}\left( {\hbar J} \right)/\left( {2eM_{\rm s}d} \right)\). The equivalent field for each torque terms are defined as \(H_{{\rm DLT}} =  \tau _{{\rm DLT}}\left( {{\hat {\mathbf m}} \times {\hat {\mathbf y}}} \right)\) and \(H_{{\rm FLT}} =  \tau _{{\rm FLT}}{\hat {\mathbf y}}\). \({\hat {\mathbf H}}_{{\mathrm{eff}}}\)is the effective field including the magnetostatic field, anisotropy field, exchange field, DzyaloshinskiiMoriya interaction field, and external field. Following parameters are used: the saturation magnetization M_{s} = 670 emu cm^{−3} (from VSM measurement, Supplementary Note 9), the perpendicular anisotropy K = 3.83 × 10^{6} erg cm^{−3} (from VSM measurement), the DzyaloshinskiiMoriya interaction constant D = 0.05 erg cm^{−2}, the exchange stiffness constant A_{ex} = 2.0 × 10^{−6} erg cm^{−1}, the damping α = 0.035 (from FMR measurement, Supplementary Note 10), the DLT efficiency c_{DLT} = –0.09, and the FLT efficiency c_{FLT} = +0.29 (from the harmonic measurement, Supplementary Note 8). The corresponding FLT/DLT ratio is –3.2. For the current pulse, both rise and fall times are 100 ps. In our sign convention, a negative DLT efficiency (c_{DLT} < 0) induces an ‘up’to‘down’ switching for J > 0 and H < 0 (θ_{ H } = 180°). The considered geometry has dimension of 220 × 80 × 2.5 nm^{3} and the unit cell size of 2 × 80 × 2.5 nm^{3}. The initial magnetization direction of majority part of the considered geometry is ‘up’ (along +zdirection) with reversed ‘down’ domain formed at one edge. The DMI effective field (H_{DMI}) is estimated using the following relation^{30, 42}: \(H_{{\rm DMI}} = D/\Delta M_{\rm s}\). Here, D = +0.05 erg cm^{−2} is the reported DMI constant value in the Ta/CoFeB/MgO structure^{38, 42, 48}, and \(\Delta = \sqrt {A_{{\rm ex}}/K}\) is the DW width. The applied J is uniform in the lateral plane (Supplementary Notes 11 and 12).
Data availability
The data that support the findings of this study are available from the corresponding author on request.
References
Slonczewski, J. C. Currentdriven excitation of magnetic multilayers. J. Magn. Magn. Mater. 159, L1–L7 (1996).
Berger, L. Emission of spin waves by a magnetic multilayer traversed by a current. Phys. Rev. B 54, 9353–9358 (1996).
Tsoi, M. et al. Excitation of a magnetic multilayer by an electric current. Phys. Rev. Lett. 80, 4281–4284 (1998).
Myers, E. B., Ralph, D. C., Katine, J. A., Louie, R. N. & Buhrman, R. A. Currentinduced switching of domains in magnetic multilayer devices. Science 285, 867–870 (1999).
Sun, J. Z. Spincurrent interaction with a monodomain magnetic body: a model study. Phys. Rev. B 62, 570–578 (2000).
Ohno, H. et al. Electricfield control of ferromagnetism. Nature 408, 944–946 (2000).
Kanai, S. et al. Electric fieldinduced magnetization reversal in a perpendicularanisotropy CoFeBMgO magnetic tunnel junction. Appl. Phys. Lett. 101, 122403 (2012).
Wang, W.G., Li, M., Hageman, S. & Chien, C. L. Electricfieldassisted switching in magnetic tunnel junctions. Nat. Mater. 11, 64–68 (2012).
Shiota, Y. et al. Induction of coherent magnetization switching in a few atomic layers of FeCo using voltage pulses. Nat. Mater. 11, 39–43 (2012).
Dorrance, R. et al. DiodeMTJ crossbar memory cell using voltageinduced unipolar switching for highdensity MRAM. IEEE Electron Device Lett. 34, 753–755 (2013).
Miron, I. M. et al. Perpendicular switching of a single ferromagnetic layer induced by inplane current injection. Nature 476, 189–193 (2011).
Liu, L. et al. Spintorque switching with the giant spin hall effect of tantalum. Science 336, 555–558 (2012).
Pai, C.F. et al. Spin transfer torque devices utilizing the giant spin Hall effect of tungsten. Appl. Phys. Lett. 101, 122404 (2012).
Emori, S., Bauer, U., Ahn, S.M., Martinez, E. & Beach, G. S. D. Currentdriven dynamics of chiral ferromagnetic domain walls. Nat. Mater. 12, 611–616 (2013).
Yamanouchi, M. et al. Three terminal magnetic tunnel junction utilizing the spin hall effect of iridiumdoped copper. Appl. Phys. Lett. 102, 212408 (2013).
Lee, S.W. & Lee, K.J. Effect of wavy spintransfer torque on ultrafast unipolar switching of a nanomagnet with outofplane polarizer. IEEE Trans. Magn. 47, 3872–3875 (2011).
Kent, A. D., Özyilmaz, B. & Barco, E. D. Spintransferinduced precessional magnetization reversal. Appl. Phys. Lett. 84, 3897 (2004).
Papusoi, C. et al. 100 ps precessional spintransfer switching of a planar magnetic random access memory cell with perpendicular spin polarizer. Appl. Phys. Lett. 95, 072506 (2009).
Kanai, S. et al. Magnetization switching in a CoFeB/MgO magnetic tunnel junction by combining spintransfer torque and electric fieldeffect. Appl. Phys. Lett. 104, 212406 (2014).
Park, J., Rowlands, G. E., Lee, O. J., Ralph, D. C. & Buhrman, R. A. Macrospin modeling of subns pulse switching of perpendicularly magnetized free layer via spinorbit torques for cryogenic memory applications. Appl. Phys. Lett. 105, 102404 (2014).
Legrand, W., Ramaswamy, R., Mishra, R. & Yang, H. Coherent subnanosecond switching of perpendicular magnetization by the fieldlike spinorbit torque without an external magnetic field. Phys. Rev. Appl. 3, 064012 (2015).
Kanai, S. et al. Inplane magnetic field dependence of electric fieldinduced magnetization switching. Appl. Phys. Lett. 103, 072408 (2013).
Finocchio, G., Carpentieri, M., Martinez, E. & Azzerboni, B. Switching of a single ferromagnetic layer driven by spin Hall effect. Appl. Phys. Lett. 102, 212410 (2013).
Garello, K. et al. Ultrafast magnetization switching by spinorbit torques. Appl. Phys. Lett. 105, 212402 (2014).
Fukami, S., Anekawa, T., Zhang, C. & Ohno, H. A spin–orbit torque switching scheme with collinear magnetic easy axis and current configuration. Nat. Nanotech. 11, 621–625 (2016).
Fan, X. et al. Observation of the nonlocal spinorbital effective field. Nat. Commun. 4, 1799 (2013).
Garello, K. et al. Symmetry and magnitude of spinorbit torques in ferromagnetic heterostructures. Nat. Nanotech. 8, 587–593 (2013).
Skinner, T. D. et al. Spinorbit torque opposing the Oersted torque in ultrathin Co/Pt bilayers. Appl. Phys. Lett. 104, 062401 (2014).
Qiu, X. et al. Spin–orbittorque engineering via oxygen manipulation. Nat. Nanotech. 10, 333–338 (2015).
Lee, O. J. et al. Central role of domain wall depinning for perpendicular magnetization switching driven by spin torque from the spin Hall effect. Phys. Rev. B 89, 024418 (2014).
Zhang, C., Fukami, S., Sato, H., Matsukura, F. & Ohno, H. Spinorbit torque induced magnetization switching in nanoscale Ta/CoFeB/MgO. Appl. Phys. Lett. 107, 012401 (2015).
Martinez, E. et al. Universal chiraltriggered magnetization switching in confined nanodots. Sci. Rep. 5, 10156 (2015).
Mikuszeit, N. et al. Spinorbit torque driven chiral magnetization reversal in ultrathin nanostructures. Phys. Rev. B 92, 144424 (2015).
Yu, J. et al. Spin orbit torques and DzyaloshinskiiMoriya interaction in dualinterfaced CoNi multilayers. Sci. Rep. 6, 32629 (2016).
Baumgartner, M. et al. Spatially and timeresolved magnetization dynamics driven by spin–orbit torques. Nat. Nanotech. 12, 980986 (2017).
Qiu, X. et al. Angular and temperature dependence of current induced spinorbit effective fields in Ta/CoFeB/MgO nanowires. Sci. Rep. 4, 4491 (2014).
Liu, H. et al. Dynamics of spin torque switching in allperpendicular spin valve nanopillars. J. Magn. Magn. Mater. 358–359, 233–258 (2014).
Lo Conte, R. et al. Role of B diffusion in the interfacial DzyaloshinskiiMoriya interaction in Ta/Co_{20}Fe_{60}B_{20}/MgO nanowires. Phys. Rev. B 91, 014433 (2015).
Lee, S.W. & Lee, K.J. Magnetization dynamics driven by angledependent spinorbit spintransfer torque. J. Korean Phys. Soc. 67, 1848–1852 (2015).
Kim, S.K., Lee, J.Y., Choi, Y.S., Guslienko, K. Y. & Lee, K.S. Underlying mechanism of domainwall motions in soft magnetic thinfilm nanostripes beyond the velocitybreakdown regime. Appl. Phys. Lett. 93, 052503 (2008).
Yoshimura, Y. et al. Solitonlike magnetic domain wall motion induced by the interfacial DzyaloshinskiiMoriya interaction. Nat. Phys. 12, 157–161 (2016).
Emori, S. et al. Spin Hall torque magnetometry of Dzyaloshinskii domain walls. Phys. Rev. B 90, 184427 (2014).
Pai, C.F., Mann, M., Tan, A. J. & Beach, G. S. D. Determination of spin torque efficiencies in heterostructures with perpendicular magnetic anisotropy. Phys. Rev. B 93, 144409 (2016).
Yoon, J. et al. Anomalous spinorbit torque switching due to fieldlike torque–assisted domain wall reflection. Sci. Adv. 3, e1603099 (2017).
Decker, M. M. et al. Time resolved measurements of the switching trajectory of Pt/Co elements induced by spinorbit torques. Phys. Rev. Lett. 118, 257201 (2017).
Lee, K.S., Lee, S.W., Min, B.C. & Lee, K.J. Threshold current for switching of a perpendicular magnetic layer induced by spin Hall effect. Appl. Phys. Lett. 102, 112410 (2013).
Donahue, M. J. & Porter, D. G. OOMMF User’s Guide, Version 1.00, Report no. NISTIR 6376 (National Institute of Standards and Technology, Gaithersburg, MD, 1999).
Khan, R. A. et al. Effect of annealing on the interfacial DzyaloshinskiiMoriya interaction in Ta/CoFeB/MgO trilayers. Appl. Phys. Lett. 109, 132404 (2016).
Acknowledgements
This research was supported by the National Research Foundation (NRF), Prime Minister’s Office, Singapore, under its Competitive Research Programme (CRP award no. NRFCRP12201301). J.M.L. thanks S.W. Lee and K.J. Lee for useful discussions and J. Yu for helping graphic works.
Author information
Authors and Affiliations
Contributions
J.M.L., J.H.K., and H.Y. initiated the project. J.M.L., X.Q., and R.M. deposited and characterized films. J.M.L., J.H.K., and J.S. fabricated devices. J.M.L., J.H.K., and J.B.Y. performed measurements. J.M.L. did micromagnetic simulations. S.S. measured the FMR. K.C. conducted the calculations based on the finite element method. All authors discussed the results. J.M.L., R.R., and H.Y. wrote the manuscript. H.Y. supervised the project.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lee, J.M., Kwon, J.H., Ramaswamy, R. et al. Oscillatory spinorbit torque switching induced by fieldlike torques. Commun Phys 1, 2 (2018). https://doi.org/10.1038/s4200501700023
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s4200501700023
This article is cited by

Twodimensional materials prospects for nonvolatile spintronic memories
Nature (2022)

Mechanism of fieldlike torque in spinorbit torque switching of perpendicular magnetic tunnel junction
Science China Physics, Mechanics & Astronomy (2022)

Ultrafast and energyefficient spin–orbit torque switching in compensated ferrimagnets
Nature Electronics (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.