The ability to precisely edit individual bases of bacterial genomes would accelerate the investigation of the function of genes. Here we utilized a nickase Cas9-cytidine deaminase fusion protein to direct the conversion of cytosine to thymine within prokaryotic cells, resulting in high mutagenesis frequencies in Escherichia coli and Brucella melitensis. Our study suggests that CRISPR/Cas9-guided base-editing is a viable alternative approach to generate mutant bacterial strains.
Programmable modification of genomes is a vital approach to the study of gene function1,2,3. Recombineering using the recA and Lambda Red systems are prevalent methods for constructing modified strains in various bacteria species4,5,6,7,8,9,10. RecA-mediated recombination needs long homologous target gene sequences (≥500 bp), and occurs at a low frequency (10−6 to 10−4)4,5. In contrast, the λ Red system shows high recombination efficiency (~10−3 to 10−1), and requires as little as 30 bp of homologous sequence to serve as a substrate6,7,8,9,10. Recently, the CRISPR (clustered, regularly interspaced, short palindromic repeats) /Cas9 system1,2 was employed to assist editing of bacterial genomes by killing non-edited cells, leading to a recovery of almost 100% edited cells11,12. However, donor DNA as editing template is still required to knock out genes in bacterial cells using these methods.
Recently, a system called “Base Editor” (abbreviated to BE) was reported, which fused cytidine deaminase to a CRISPR-associated Cas9 variant to convert cytosine (C) to uracil (U) at targeted sites without double-strand breaks (DSBs), resulting in C → T (or G → A) substitution13. The base-editing system directly edits single nucleotides, which avoids the dependence on homology-dependent repair (HDR). Various derivations of the BE system, such as BE1, BE2 and BE3, have been developed and all the derivations induce base-editing in mammalian cells with very low indel rates. These systems have been applied to mammalian cells, animals and plants13,14,15,16,17,18. Other CRISPR-guided BE systems using human AID (activation-induced cytidine deaminase)19 or AID ortholog PmCDA1 from sea lamprey20 have been reported and demonstrated in eukaryotic organisms21,22. Some researchers used BE3 to engineer premature coding termination to provide an alternative approach to knock out genes15,18,23. We envisioned that a highly efficient BE3 system would enable rapid and efficient programmable editing in bacteria.
In the present work, we constructed bacterial expressing BE3 plasmids that induced the substitution of C to T to convert a Gln codon (CAA) to a stop codon (TAA) in the tetA gene conferring tetracycline resistance at close to 100% efficiency in E. coli strain XL1-Blue (tetracycline insensitive). Next, the lacZ and rppH genes were selected to further validate the same method in E. coli. We also demonstrated that BE3 can achieve precise and efficient base conversion within Brucella melitensis (B. melitensis) in a targeted manner. Collectively, the BE3 editor was shown to be a powerful tool for direct base changes in E. coli and B. melitensis.
E. coli genome editing using BE3
First, we tested whether BE3 can function in E. coli cells. The BE3 editing element was cloned into an inducible expression vector, under control of the PLlacO-1 promoter (Supplementary Fig. 1, Supplementary Note 1). The E. coli strain XL1-Blue was selected as a model because the Tn10 transposon containing the tetracycline-resistance gene tetA is located in its genome24. We predicted that the CAG/CAA (Gln) or CGA (Arg) codons would be converted into respective TAG/TAA/TGA premature Stop codons, thereby inactivating the TetA protein tetracycline efflux pump function. The sgRNAs were designed within the first third of the tetA open reading frame to truncate the protein (Fig. 1a). The base-editing occurred during the transformation recovery step when the BE3 protein was expressed and performed its function (1 h post heat shock). After base-editing, the edited E. coli cells were isolated by plate streaking to avoid satellite colony contamination and then grown in liquid cultures. A 2 μL volume of each liquid culture was dropped on plates (≥2.605 × 107 colony-forming unit (CFU), concentration: 1.3025 × 1010 CFU mL−1, Supplementary Table 1, Supplementary Table 2) to detect the loss of antibiotic resistance (Fig. 1b). For the BE3-induced incapacitating TetA at site 2, all colonies (20/20) showed a loss of function (Fig. 1b). Mutagenesis at both sites was confirmed by PCR amplification and Sanger sequencing. For the sgRNA1-guided mutagenesis, the base substitution occurred at an undesired codon (ATC|Ile to ATT|Ile) rather than at the designed one (Fig. 1c). The sequencing of tetracycline-sensitive colonies showed that the CAA|Gln codon was converted to a TAA|Stop codon, and that other codons were also changed by base conversion (Fig. 1d). Editing was 100% efficient at some sites.
Editing efficiency of BE3 in E. coli
Next, we constructed a lacZ:sfGFP reporter gene-integrated E. coli strain to calculate the accuracy of editing efficiency. A DNA fragment containing the PLtetO-1 promoter, which controlled the lacZ:sfGFP-fused reporter gene and the chloramphenicol-resistance gene (Fig. 2a), was PCR amplified from pXG-10sf25. This fragment harbored homologous sequence and integrated into the genome through λ red-mediated recombination. The base-edited colonies were cultured in LB medium and analyzed by flow cytometry and X-gal cytochemistry. Flow cytometry showed that 99.93% of edited E. coli cells lost fluorescence (Fig. 2b), indicating that the BE3-mediated base-editing in E. coli was almost 100% efficient. X-gal reactions and Sanger sequencing confirmed the editing (Fig. 2c, d). We also tested BE3 on the rppH gene and produced highly efficient editing (Fig. 3). In addition, cytotoxicity when using BE3 was measured by transformation. Compared to wtCas9, BE3 protein is non-lethal when it targets and nicks the genome (Supplementary Fig. 2).
B. melitensis genome engineering using BE3
We next applied this editor in B. melitensis, an α proteobacteria and facultative intracellular bacterial pathogen. To apply the base-editing system in B. melitensis, we constructed an IPTG-inducible expression vector based on the broad host-range plasmid, pBBR1-MCS526, and tested inducing conditions (Fig. 4a). The BE3 gene was cloned into the inducible expression vector under control of the trc promoter (Supplementary Fig. 3, Supplementary Note 2). Three sgRNAs were designed for mutagenesis of the virB10 gene (Fig. 4b). The transformants were cultured in TSB medium, followed by inactivation and genomic DNA extraction. The target regions were amplified and sequenced. The conversion occurred at only one site among the candidates with 100% efficiency (Fig. 4c).
We demonstrated that CRISPR/Cas9-guide-specific base conversion could be achieved in Gram-negative bacteria, E. coli and B. melitensis, with high efficiency. The conversion at expected sites resulted in premature termination of coding genes, which abolished protein function. This finding simplifies the process of base mutagenesis and expands the applications of the CRISPR/Cas9 system in bacterial cells.
Recently, programmable base conversion has been reported in E. coli by fusing cytidine deaminase with ZF (zinc finger) or TALE (transcription activator-like effectors)-DNA binding domains27. A single copy GFP reporter gene locus possessing a ‘broken’ start codon (‘ACG’) was rescued by deamination with up to 13% efficiency in an uracil repair gene-deleted E. coli strain. In our study, the CRISPR/Cas9-guided BE3 system achieved much higher efficiency because a single-strand DNA ‘R loop’ structure28, a natural substrate for APOBEC1 deaminase29, is generated by Cas9 unwinding activity28. The break on the non-edited strand mediated by nCas9 enhances the trend towards the expected editing13.
Some limitations remain for using base-editing as a way to knock out a gene: first, the premature stop codon depends on CAA/CAG/CGA/TGG codons; second, a truncation site should be at an appropriate location in an ORF; additionally, we should not ignore the fact that the editing efficiency of the BE systems followed the order TC ≥ CC ≥ AC ≥ GC13.
Recently, improved BE systems have been reported. On the basis of Cas9 homology and engineered variants, improved base editors with different protospacer adjacent motif (PAM) specificities were developed and demonstrated in mammalian cells30 and zebrafish31. Furthermore, the width of the deamination window can be narrowed to 1–2 nt by engineered APOBEC1 enzymes30. Notably, programmable base editing of A to G was reported recently32, which broadens the application of base editing. The wild-type E. coli tRNA-specific adenosine deaminase (ecTadA)-dCas9 fused protein with no ability of deaminate adenine at target loci in DNA was transformed into high efficient adenine base editors (ABEs) after a series of evolution and engineering. The ABEs show high efficient A-to-G editing in both E. coli and human cells. The BEs and ABEs enable programmable editing of all four nucleotide without DSBs. Taken together, we show that CRISPR-guided BE3 can perform highly efficient base-editing in bacterial cells, which may reduce the time and efforts that take to manipulate bacterial genes and to obtain viable mutant bacterial strains.
Construction of pEcBE3 and pBmBE3 vectors
The original plasmid containing the BE3 element (rAPOBEC1-XTEN-Cas9n-UGI-NLS) was obtained from Addgene (pCMV-BE3, #73021)13. The BsaI restriction sites in the BE3 element were removed through site-directed mutagenesis by Gibson assembly. The mutated BE3 was cloned into the Pml I site in the inducible expression vector pZF17–31 (Supplementary Fig. 3, Supplementary Note 2) by Gibson assembly, resulting in pZF17–32 (Supplementary Fig. 4, Supplementary Note 3). The sgRNA gene was amplified from pZF17–33 (Supplementary Fig. 5, Supplementary Note 4) and cloned into the XhoI site in pZF17–32, resulting in inducible expression vector pEcBE3 (Supplementary Fig. 1, Supplementary Note 1) for use in base editing in E. coli. The pBmCRISPR2 vector (Supplementary Fig. 6, Supplementary Note 5) used for expressing Cas9 and sgRNA in B. melitensis was used as the vector backbone for pBmBE3. The Cas9 coding sequence was replaced by the mutated BE3 element through Gibson assembly, to obtain pBmBE3 (Supplementary Fig. 7, Supplementary Note 6). For sgRNA cloning, synthesized oligonucleotides were annealed to form a dimer, which was then ligated into BsaI-digested pEcBE3 or pBmBE3. PCR was performed using Phanta Max Super-Fidelity DNA Polymerase (Vazyme), and Gibson assembly was performed according to a reported protocol33. Oligonucleotide sequences are listed in Supplementary Table 3–4.
Base-editing assay and screening
We performed the base-editing assay during the transformation recovery step. Chemically competent E. coli cells were transformed with pEcBE3 series plasmids. After heat-shock, transformed E. coli cells were incubated in SOC medium (containing 0.6 mM IPTG) at 37 °C shaking at 180 r.p.m for 1 h. Cells were then spread on LB agar plates (containing 50 μg mL−1 ampicillin and 0.6 mM IPTG). For mutagenesis in B. melitensis, pBmBE3 series plasmids were transformed into strain 16 M electro-competent cells by electroporation. The transformed cells were recovered in TSB (Tryptic Soy Broth, BD) medium (containing 0.6 mM IPTG) at 37 °C shaking at 180 r.p.m. for 4 h and were then spread on TSA plates (containing 50 μg mL−1 gentamycin and 0.6 mM IPTG). Empty BE3 vectors carrying non-targeting sgRNA were transformed as control. Single colonies were then cultured in LB medium (for E. coli) or TSB medium (for B. melitensis) and genomic DNA extracted using a bacterial genome DNA extraction kit (TIANGEN). Since satellite colonies occurs when the ampicillin-resistance gene contained in pEcBE3 series plasmids is used, it is necessary to isolate the transformed E. coli colonies so as to avoid contamination being contaminated by satellite colonies. For each plate, the colonies were resuspended in 1 mL of LB medium, and spreaded on LB agar plate (containing 50 μg mL−1 ampicillin and 0.6 mM IPTG) using sterile incubation loop according to T-Streak methods. The plate then was incubated at 37 °C overnight to obtain single colony. The target regions were amplified by PCR and sequenced to confirm mutagenesis. The mineral oil was added to PCR tube to avoid aerosol contamination. The primers used are listed in Supplementary Table 3.
E. coli reporter strain construct
The lacZ:sfGFP gene was selected as a reporter gene. The lacZ:sfGFP-fused gene and chloramphenicol-resistance gene (CmR) were amplified from pXG-10sf25 using two cycle PCR, which harbored homologous sequence targeting the E. coli strain GS178334 genome. GS1783 cells were prepared as electro-competent cells according to a previous study34. The gel-purified PCR product was electro-transformed into GS1783 cells. After incubation in 1 mL SOC medium at 37 °C with shaking at 180 r.p.m., the transformed cells were screened on LB agar plates containing 34 μg mL−1 chloramphenicol. The primers used are listed in Supplementary Table 3.
Inducing conditions of the trc promoter in B. melitensis
The lacZ:sfGFP gene was cloned into the NsiI and XbaI sites of the inducible expression vector, pZK79 (Supplementary Fig. 8, Supplementary Note 7, in previous study not reported), to obtain pZK79-lacZ:sfGFP. The pZK79 and pZK79-lacZ:sfGFP were electro-transformed into B. melitensis 16 M competent cells, respectively. Transformants were cultured in 5 mL TSB medium (50 μg mL−1 gentamycin) for 48 h, and then in fresh 5 mL TSB medium (50 μg mL−1 gentamycin) at a ratio of 1:50 until the OD600 reached ~0.6. IPTG was then added to gradient final concentration (0 mM, 0.5 mM, 1.0 mM, 1.5 mM and 2.0 mM) and the culture continued for 6 h. Phenol was then added at a final concentration of 1% (v/v) to inactivate the culture. Cells were then collected and washed with PBS (phosphate-buffered saline buffer). GFP fluorescence was measured using a PerkinElmer EnVision plate reader (the OD600 value was used to normalize cell concentration). Primers used are listed in Supplementary Table 3.
Isolated single colonies were cultured in LB medium (50 μg mL−1 ampicillin) and 2 μL of bacterial culture then spread on LB agar plates. In the LacZ activity assay, we used ampicillin (50 μg mL−1) and X-gal (40 μg mL−1) LB agar plates. In the tetracycline-sensitive assay, we used ampicillin (50 μg mL−1) or ampicillin (50 μg mL−1) plus tetracycline (10 μg mL−1) LB agar plates. Bacterial culture concentration was assessed by optical density (OD600) measurement and serial dilution-plate count. We measured the OD600 value of 20 bacterial cultures (tetA-editing), and selected the culture with the lowest value for the serial dilution-plate count.
Flow cytometry assay
Transformed GS1783-LacZ:sfGFP cells were resuspended in 2 mL PBS buffer, and diluted 100-fold. The diluted cells were analyzed using a BD FACSVerse flow cytometer. The GS1783 cells and untransformed GS1783-LacZ:sfGFP cells were taken as GFP-negative and GFP-positive control cells, respectively.
Cytotoxicity assay of BE3
To compare cytotoxicity of wtCas9 and BE3 on E. coli cells, the plasmid pZK77 (Supplementary Fig. 9, Supplementary Note 8) expressing wtCas9 and sgRNA was constructed based on pwtCas9-bacteria (Addgene: #44250) by inserting a synthesized sgRNA gene into the AvrII site. The pZK77::RppH site was constructed using the same method as for pEcBE3::RppH. DH5α chemically competent cells (Shanghai Weidi Biotechnology) were transformed with 100 ng of pEcBE3::RppH, pEcBE3, pZK77::RppH or pZK77. The empty non-targeted pEcBE3 and pZK77 were controls. After heat-shock, cells were recovered in 1 mL SOC medium for 1 h at 37 °C with shaking at 180 r.p.m. The transformed cells were diluted 103-105-fold or not diluted (for pZK77::RppH) and plated onto Amp LB agar plates.
The t test was used to analyze the difference between experiments.
All the data generated or analyzed during this study are included in this published article (and its supplementary information files).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We would like to thank Dr. Zeliang Chen (Shenyang Agricultural University) for his generous gift of B. melitensis strain 16 M. We also thank Dr. Jeremy Allen (Liwen Bianji, Edanz Group China) for editing the English text of this manuscript critically. This work was supported by the National Key Research and Development Program (2016YFD0500105), the Natural Science Foundation of China (31470259 and 31770191), the Technique Innovation Program of Hubei Province (2016ABA124), and Fundamental Research Funds for the Central Universities (2016PY052) to Z-F.L.