Abstract
We discuss the effect of the in-plane electric field on the Raman spectroscopy for few-layered MoS2. The characteristic Raman modes of MoS2 show gradual red shift, while the intensity increases by 45–50% as the electric field is increased, showing a large electro-optical effect. Structural analysis suggests that our few-layered MoS2 belongs to P6/m2 space group with broken inversion symmetry. We attribute this gradual red shift to this broken symmetry-driven piezoelectricity in MoS2, which generates tensile strain along the perpendicular direction when the electric field is applied. The enhancement of the effect upon reversing the electric field direction adds credence to our interpretation. Our first principal density-functional theory calculation further substantiates the claim. This optical probing of the electromechanical coupling may lead to applications as a nonextensive technique for electric field/strain sensors in the nanoelectronics devices.
Similar content being viewed by others
Introduction
Tunability of two-dimensional quantum materials (2DQM) through an external perturbation has strongly excited condensed matter research in recent years due to its possibility of applications, if not by the rich physics they offer1. Graphene and other 2DQMs2,3,4,5,6 exhibit a wealth of unusual and fascinating properties, such as Dirac2 or Weyl semimetal, topological insulator7,8, charge-density wave9, and superconductivity7,10. Among the vast library of 2DQM6, atomically thin semiconducting transition metal dichalcogenides (TMDCs) (having formula MX2, M = Mo and W and X = S, Se, and Te) have attracted particular interest in optoelectronic application due to their strong light–matter interaction owing to the presence of van-Hove singularity in their electronic structure11,12. The bulk 3D TMDCs are formed by the stacking of individual layers through a weak van der Waal’s (vdW) force, making them easy to cleave and get a monolayer, whereas the atoms within each 2D plane are bound through a strong covalent bonding12. Thus, the huge difference between in-plane and out-of-plane interatomic interaction strengths often results in highly anisotropic electronic and mechanical properties in these layered systems. Coupling of these anisotropic properties may lead to interesting phenomena.
Quasi-2D molybdenum disulfide (MoS2)13 is a prototype material to study the light–matter interaction, since it has shown promising optoelectronic applications14. MoS2 crystallizes in hexagonal structure and belongs to the space group/point group P3m1/D6h (with inversion symmetry). Similar to other vdW crystals, e.g., graphene, an atomically thin version of this naturally occurring MoS2 has been successfully obtained by mechanical exfoliation13,14,15 or liquid-phase exfoliation16. The anisotropic crystal structure, strong in-plane Coulomb interaction, and weak out-of-plane van der Waal’s interaction of MoS2 leads to several interesting anisotropic optical and electronic behavior17,18,19,20,21,22. Both monolayer and few-layered MoS2 exhibit a number of intriguing physical properties, including a direct optical bandgap of about 1.8 eV13,14, strong photoluminescence (PL), electroluminescence13,14,23,24, and reasonably high mobility of the order of 0.2 m2/Vs25,26. Numerous studies indicate that monolayer MoS2 exhibits large exciton- and trion-binding energies27, inversion symmetry breaking together with strong spin–orbit coupling28, and valley Hall effect29. These indicate the promising possibility of MoS2 in next-generation nanoelectronics15,30 and photonics31 applications.
Raman spectroscopy, a powerful tool to probe the phonons in solids, has been used extensively as a nondestructive method to characterize electronic and vibrational properties of 2DQMs32,33. It has also been used for identification of a number of layers33,34,35, and the twist angle between the layers in 2DMs36. MoS2 shows two distinct and well-defined types of Raman modes, one due to the stretching of S atoms along the c axis (A mode) and the other is from the in-plane breathing motion (\({\text{E}}^{1}_{2g}\) mode)12,20,33,37. The resonance excitation (~1.8–2.0 eV) gives rise to a rich spectrum of second-order peaks and multiphonon bands26,33 due to strong electron–phonon coupling, and is widely used as the fingerprint characterization of MoS233. However, the effect of external perturbation on the Raman spectrum of MoS2 is not extensively reported. Although recently, a giant increase in the phonon modes’ intensity has been observed in monolayer to bulk MoS2 under a magnetic field37 and electron irradiation38, the effect of the electric field (E) is still unknown. Recently, the gate voltage dependence on the optical properties in general, has been discussed for MoS2, along with its possibility as optical modulators39. The effect of the gate voltage on the Raman spectroscopy has also been discussed39.
In this paper, we describe the effect of moderate in-plane electric field on the phonon modes of few-layered MoS2, probed by Raman spectroscopy at room temperature. We have been able to correlate the effect of the applied electric field to the strain generated in MoS2, by density-functional theory (DFT)-based first-principal calculations of its phonon modes.
Results
Structural characterization
The morphology of the as-prepared MoS2 was observed in transmission electron microscopy (TEM) and shown in Fig. 1a. It possesses nanosheet-like structure. In the inset of Fig. 1a we show the thickness map by Energy Filter TEM imaging recorded at 300 keV. The higher magnification image of the yellow-colored highlighted area in Fig. 1a is shown in Fig. 1b. We calculate the interplanar spacing as 0.63 nm, which corresponds to (002) plane of MoS2 from the high-resolution TEM image (Fig. 1b). The selected area electron diffraction (inset of Fig. 1b) shows the hexagonal lattice arrangement of MoS2. The line profile along the blue rectangular box (Fig. 1a, inset) gives a numerical value of the relative thickness (\(\frac{t}{{\lambda }_{x}}\)) of the specimen (Fig. 1c), where t is the thickness and λx is inelastic mean-free path of the electron40,41. The thickness of the material can be determined by knowing λx, which is 119 nm40 at 300 keV. This implies that the average thickness of one of the segments of the MoS2 flake (highlighted in Fig. 1a, inset) is ≈1.8 nm, which is close to the thickness of a three-layered MoS2. A typical thickness distribution histogram, measured in a similar manner, is shown in Fig. 1d. The crystalline structure and phase of MoS2 nanosheets were further confirmed by XRD as shown in Fig. 1e, with the respective planes shown in parenthesis42,43. In Fig. 1e, the dots represent the experimental points, while the blue line is the Rietveld refinement fit44,45 and the red line is the difference between the two. The structural refinement suggests that our MoS2 sample is of pure hexagonal structure (space group P63/mmc) with the lattice parameters a = b = 0.3117 nm and c = 0.127 nm. We observe a shrinkage along the a and b axes and an elongation along the c axis. Compared with the standard relative intensities of different peaks, it is found that (103) and (105) peaks are suppressed, indicating an irregular stacking arrangement of the atomic layers46. Since (h–k = 0) reflections are unaffected by the stacking fault broadening, the (110) reflection has a larger relative intensity than (103) and (105) peaks. Furthermore, it can be seen from the fitting parameters in Supplementary Table 1 (see supplementary information) that the fault probability is ≈14%, suggesting a disordered stacked system.
Raman spectra characterization of MoS2
The Raman spectra of our few-layered MoS2 at various in-plane electric fields are shown in Fig. 2. For zero field, the major characteristic Raman modes are observed at 382.5 and 406.7 cm−1 that belong to the in-plane \({\text{E}}_{2g}^{1}\) and out-of-plane A1g vibrations, respectively35. As an indirect measure, the position and the difference between the \({\text{E}}_{2g}^{1}\) and A1g evolves with the increase in the number of layers in MoS2 until six layers before it gets saturated12,34,35. At zero electric field, we find that the difference between these two Raman modes is 24.2 cm−1, which is close to what is observed earlier for the five-layered MoS234,35. Furthermore, the presence of a strong direct PL (and subsequent absence of an indirect PL) (see supplementary information) suggests that our MoS2 is indeed a few-layered thick, as the bulk MoS2 shows only indirect electronic transition35,47.
Electric field effect on Raman spectra of MoS2
As the in-plane electric field is increased, both the Raman characteristic peaks showed gradual red shifts in frequency (Fig. 2). This can be seen more clearly in Fig. 3, where we show the (a) \({\text{E}}_{2g}^{1}\) and (b) A1g spectra measured at different electric fields. A clear change in the peak position for both the peaks with the changing electric field can be observed. Alongside the shift in the peak positions to a lower value, the peak intensity increases with the increase in the electric field (Fig. 3d), while the full-width-half-maxima (FWHM) remain almost unchanged (Fig. 3c). Moreover, the difference between the \({\text{E}}_{2g}^{1}\) and A1g peak remains almost unaffected over the window of the applied electric field (see supplementary information). The intensity of the phonon modes increased substantially by 45–50% as the electric field is increased (Fig. 3d), implying a large electro-optical coupling. This gradual increase can be attributed to the manipulation of the MoS2 electrons under the electric field as it in turn affects the Raman phonon intensity37. A more careful look at the Raman spectra reveals the presence of an asymmetry near 377 cm−1 48,49, which appears due to the transverse optical phonon mode of MoS2. The presence of this asymmetry in the zero electric field spectra allows us to infer that this arises due to the quality of the sample and is not related to the effect of the electric field.
Discussion
The intriguing red shift of principal phonon modes of MoS2 under the electric field, can be attributed to the doping by source–drain bias due to the electric field or by an increase in temperature due to Joule heating. The effect of temperature, in this case, can be refuted as under increasing temperature, the Raman peak intensity decreases and the FWHM increases50, while we observe the opposite trend in our system. The electrostatic doping, due to band bending, on the other hand, can lead to the softening of the phonon modes. However, the moderate applied electric field, to our understanding, will not be able to induce doping in the few-layered MoS2 under consideration.
On the contrary, we believe that the red shifts in Raman spectra under the electric field can be due to the strain generated in the system. MoS2, with an even number of layers, belongs to the P3m1 space group and with an odd number of layers belongs to the P6m2 space group (without inversion symmetry)51,52. Interestingly, this broken inversion symmetry induces piezoelectricity in MoS2 with an odd number of layers51,52. Notably, in a piezoelectric material, if an electric field is applied, a strain is generated along its perpendicular direction and vice versa. This piezoelectricity in MoS2 develops and vanishes as the number of layers change from odd to even due to the breaking and the recovery of the inversion symmetry51,52. As our MoS2 belongs to the space group P6m2, we believe that the applied in-plane electric field induces an out-of-plane tensile strain in it due to the broken inversion symmetry-driven piezoelectricity.
To substantiate our claim, we performed DFT-based first-principal calculations of the Raman active phonon modes of MoS2 for different percentages of out-of-plane tensile strains on it (for calculation details, see “Methods” section).
The DFT-calculated, Raman active modes of MoS2, for zero tensile strain (or zero electric field) occur at 385.3 cm−1 (\({\text{E}}_{2g}^{1}\)), and 408.3 cm−1 (A1g), which is in agreement with the experimental results12,33,53. The plots for the calculated Raman modes are shown in the supplementary information.
In Fig. 4a, b, we show the experimental change in the Raman mode for \({\text{E}}_{2g}^{1}\) and A1g with the applied electric field, with respect to its zero electric field value. In the same figure, we show the corresponding change in Raman frequency with applied out-of-plane tensile strain with respect to its zero-strain value, calculated by first-principal calculation. With the applied electric field/tensile strain, both the \({\text{E}}_{2g}^{1}\) and A1g modes shift to lower frequencies. The frequency shift (Δω) is defined as the difference between the frequencies of Raman active mode \({\text{E}}_{2g}^{1}\) (A1g) at a finite electric field/tensile strain and at zero electric field/tensile strain. Mathematically, \(\Delta {\omega}_{ph}={\omega}_{ph}(E)-{\omega }_{ph}(E=0)\) where ‘ph’ stands for either \({\text{E}}^{1}_{2g}\) or A1g. It is found that the frequencies of \({\text{E}}_{2g}^{1}\) and A1g decrease with increasing tensile strain along [001] direction in a similar manner as it changes with the applied in-plane electric field. Our first-principal calculation results are in agreement with the experimental data within an acceptable limit, and show similar features as observed previously on DFT-based calculation of Raman modes of MoS2 under tensile strain16,26. The tensile strain increases the interlayer distance between S–Mo–S layers, which weaken the vdW interactions between adjacent layers. This results in a red shift in both \({\text{E}}_{2g}^{1}\) and A1g modes. However, for a given tensile strain, a reduction in Raman shift of the A1g mode is larger than that of the \({\text{E}}_{2g}^{1}\) mode. In the A1g mode (arises from out-of-plane vibration of S atoms in the opposite direction along the z direction), the change in atomic vibration is dominated by interlayer force. While for \({\text{E}}_{2g}^{1}\) long-range coulombic interlayer force plays a key role34 and thus explains the observations.
Raman spectroscopy measurements by reversing the polarity of the electric field (Fig. 4c) add more credence to our claim of this electric field-controlled strain-mediated tailoring of the principal phonon modes of MoS2. Intuitively, we expect a similar outcome as before, and indeed observe similar red shifts of the phonon modes with respect to the electric field (Fig. 4c). However, the magnitude of the change in the phonon mode frequency under the electric field with respect to its zero-field value is different in two different directions of the electric fields (Fig. 4d). A simple diagrammatic approach (Fig. 4e) of the experimental situation can help us to understand this. Although it cannot be determined unambiguously, we consider that the left panel [(i) of Fig. 4e] denotes the negative electric field direction, whereas the right panel [(ii) in Fig. 4e] denotes the positive electric field direction in accordance with our previous analogy. For (i), the piezoelectric strain on the MoS2 flake is along the out-of-plane (positive z) direction; however, for (ii), it is along the negative z direction. Now for situation (i), the strain is applied along the free surface, leading to a larger change in the phonon mode frequency in contrast to situation (ii) where the strain is acting along a direction of the supporting substrate and thus is being suppressed. This leads to the difference in the magnitude of the change in the phonon mode frequency on either direction of the applied electric fields. We presume that this would be symmetrical about the zero field, if the flake is freely standing or supported by the identical surfaces on both sides, although, for the latter, the effect of pressure might also complicate the outcome. Interestingly, this behavior of different magnitude of the effect by reversing the polarity of the electric field can possibly exploit odd-layered MoS2 in switching applications.
In summary, we prepared few-layered MoS2 nanoflakes by a chemical bottom-up approach and performed Raman spectroscopic measurements under a moderate in-plane electric field. The Rietveld analysis of the X-ray diffraction suggests that the prepared MoS2 is of hexagonal phase with broken inversion symmetry. Under the increasing in-plane electric field, both the prominent characteristic Raman modes of MoS2 show gradual red shifts (in frequency), which we believe is due to the out-of-plane tensile strain generated due to the intrinsic piezoelectricity in MoS2 with an odd number of layers. Our first-principal calculation of the Raman modes of MoS2 under different percentages of out-of-plane tensile strain shows a similar red shift and adds credence to our claim. Experimentally, our interpretation was further supported by the Raman spectroscopy measurements by reversing the polarity of the electric field. Such an optical probing of the electromechanical coupling may lead to diverse applications as a nonextensive technique for the electric field and (or) strain sensors in the nanoelectronic devices.
Methods
Sample preparation
The MoS2 samples were prepared by a chemical bottom-up approach by using molybdic oxide and potassium thiocyanate as precursor materials. These were mixed in ≈1:5, in distilled water and stirred to get a homogeneous mixture. This was then transferred into a Teflon-lined stainless-steel autoclave and was heated at 493 K for 24 h. Following this, the mixture was brought back to room temperature, and the resultant precipitate was washed thoroughly by distilled water and collected using centrifugation at 4000 rpm. Finally, the sample was dried at 353 K for 6 h under N2 gas flow to obtain the dark-gray MoS2 powder.
Device fabrication
Reduced graphene oxide (rGO) was prepared by reducing GO (for details of preparation, see ref. 54) and spin-coated on Sapphire substrate with a predefined mask. After rGO deposition, the mask was removed and a narrow channel (≈110 μm) was observed. The prepared MoS2 was spin-coated on rGO/Sapphire substrate. The electrical connection was done by putting silver electrodes. A schematic diagram and optical image of a simple device are presented in Fig. 1f.
Experiments
X-ray diffraction (XRD) was performed using a Rigaku (MiniFlex II) diffraction instrument with CuKα radiation. Transmission electron microscopy (TEM) was done in FEI TECNAI G2 F30. Raman and photoluminiscence (PL) measurements were done using a micro Raman Spectrometer (LabRam HR, Jobin Yvon) equipped with Peltier cooled CCD detector (pixel size 1024 × 256) at room temperature. We used an Argon ion blue (488-nm) laser as an excitation source, and a ×50 objective was used to focus the laser beam on the sample. The slit width of the spectrometer is 100 μm and grating of line 1800/mm is used. The spectral resolution of the spectrometer is 0.35 cm−1/pixel. The integration time for taking the Raman spectra was 30 s. The laser power was maintained at 0.2 mW throughout the measurement. A Keithley 2400 source meter was used to apply the electric field. The experimental arrangement has been shown as a schematic in Fig. 1f.
DFT calculation
The first-principal calculations have been carried out in GGA framework as implemented in QUANTUM ESPRESSO55,56,57. The optimized lattice parameters are a = b = 0.314 and c = 1.240 nm, while the experimental lattice parameters are a = b = 0.3117 and c = 1.27 nm58. The primitive lattice vectors of MoS2 are \(\overrightarrow{a}\ =\ (a,0,0),\overrightarrow{b}\ =\ (a/2,\sqrt{3}a/2,0),\) and \(\overrightarrow{c}\ =\ (c,0,0)\). The tensile strain along the z direction is defined (%ϵz) as the ratio of elongation in the length of the c vector (Δc) to its original length \((\frac{\Delta cX100}{c})\). After applying the strain along the z direction, self-consistent calculations are performed on the geometry, and vibrational modes at the center (Γ) of Brillouin zone are calculated using density-functional perturbation theory. PBEsol57 exchange and correlation functional is adopted with scalar-relativistic PAW pseudopotentials. This functional provides accurate phonon frequencies compared with experimental data59. The plane-wave basis cutoff is taken to be 55 Ry. Brillouin-zone sampling has been done using Monkhorst–Pack-type k-point mesh of 23 × 23 × 23 for self-consistent calculations. The vdW interactions are treated via the semiempirical dispersion correction DFT-D2 proposed by Grimme60. The lattice constants are obtained by performing the structural optimization until the total force on atoms was <0.0001 Ry/au.
Data availability
The data that support the findings of this study are available from the corresponding author on reasonable request to S.M. (email: sreemanta85@gmail.com) or A.S. (email: achintya@jcbose.ac.in).
References
Basov, D. N., Averitt, R. D. & Hsieh, D. Towards properties on demand in quantum materials. Nat. Mater. 16, 1077 (2017).
Novoselov, K. S. et al. Electric field effect in atomically thin carbon films. Science 306, 666–669 (2004).
Geim, A. K. & Novoselov, K. S. The rise of graphene. Nat. Mat. 6, 183–191 (2007).
Mas-Ballesté, R., Gómez-Navarro, C., Gómez-Herrero, J. & Zamora, F. 2D materials: to graphene and beyond. Nanoscale 3, 20–30 (2011).
Xu, M., Lian, T., Shi, M. & Chen, H. Graphene-like two-dimensional materials. Chem. Rev. 113, 3766–3798 (2013).
Butler, S. Z. et al. Progress, challenges, and opportunities in two-dimensional materials beyond graphene. ACS Nano 7, 2898–2926 (2013).
Fatemi, V. et al. Electrically tunable low-density superconductivity in a monolayer topological insulator. Science 362, 926–929 (2018).
Zhang, H. et al. Topological insulators in Bi2Se3, Bi2Te3 and Sb2Te3 with a single Dirac cone on the surface. Nat. Phys. 5, 438–442 (2009).
Wu, D. et al. Layered semiconductor EuTe4 with charge density wave order in square tellurium sheets. Phys. Rev. Materials 3, 024002 (2019).
Sajadi, E. et al. Gate-induced superconductivity in a monolayer topological insulator. Science 362, 922–925 (2018).
Wilson, J. A. & Yoffe, A. D. The transition metal dichalcogenides discussion and interpretation of observed optical, electrical, and structural properties. Adv. Phys. 18, 193–335 (2006).
Zhang, X. et al. Phonon and Raman scattering of two-dimensional transition metal dichalcogenides from monolayer, multilayer to bulk material. Chem. Soc. Rev. 44, 2757–2785 (2015).
Mak, K. F., Lee, C., Hone, C., Shan, J. & Heinz, T. F. Atomically thin MoS2: a new direct-gap semiconductor. Phys. Rev. Lett. 105, 136805 (2010).
Splendiani, A. et al. Emerging photoluminescence in monolayer MoS2. Nano Lett. 10, 1271–1275 (2010).
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V. & Kis, A. Single-layer MoS2 transistors. Nat. Nanotechnol. 6, 147–150 (2011).
Doratotaj, D., Simpson, J. R. & Yan, J.-A. Probing the uniaxial strains in MoS2 using polarized Raman spectroscopy: a first-principles study. Phys. Rev. B 93, 075401 (2016).
Friemelt, K., Lux-Steiner, M.-C. & Bucher, E. Optical properties of the layered transition-metal-dichalcogenide ReS2: anisotropy in the van der Waals plane. J. Appl. Phys. 74, 5266 (1993).
Camellini, A. et al. Optical characterization of anisotropic MoS2 nanosheets. 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference EIP2 (2017).
Nam, G.-H. et al. In-plane anisotropic properties of 1T′‐MoS2 layers. Adv. Mater. 31, 1807764 (2019).
Wei, G., Lenferink, E. J., Czaplewski, D. A. & Stern, N. P. Width-dependent photoluminescence and anisotropic Raman spectroscopy from monolayer MoS2 nanoribbons. Preprint at https://arxiv.org/abs/1709.04001 (2017).
LaMountain, T., Lenferink, E. J., Chen, Y.-J., Stanev, T. K. & Stern, N. P. Environmental engineering of transition metal dichalcogenide optoelectronics. Front. of Phys. 13, 138114 (2018).
Molina-Sánchez, A., Hummer, K. & Wirtz, L. Vibrational and optical properties of MoS2: from monolayer to bulk. Surf. Sci. Rep. 70, 554–586 (2015).
Cheng, R. et al. Electroluminescence and photocurrent generation from atomically sharp WSe2/MoS2 heterojunction p-n diodes. Nano Lett. 14, 5590–5597 (2014).
Xia, F., Wang, H., Xiao, D. & Ramasubramaniam, M. A. Two-dimensional material nanophotonics. Nat. Photon. 8, 899–907 (2014).
Baugher, B. W. H., Churchill, H. O. H., Yang, Y. & Jarillo-Herrero, P. Intrinsic electronic transport properties of high quality monolayer and bilayer MoS2. Nano Lett. 13, 4212–4216 (2013).
Rice, C., Young, R. J., Zan, R. & Bangert, U. Raman-scattering measurements and first-principles calculations of strain-induced phonon shifts in monolayer MoS2. Phys. Rev. B 87, 081307(R) (2013).
Qiu, D. Y., daJornada, F. H. & Louie, S. G. Optical spectrum of MoS2: Many-body effects and diversity of exciton states. Phys. Rev. Lett. 111, 216805 (2013).
Xiao, D., Liu, G.-B., Feng, W., Xu, X. & Yao, W. Coupled spin and valley physics in monolayers of MoS2 and other group-VI dichalcogenides. Phys. Rev. Lett. 108, 196802 (2012).
Mak, K. F., McGill, K. L., Park, J. & McEuen, P. L. The valley Hall effect in MoS2 transistors. Science 344, 1489–1492 (2014).
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N. & Strano, M. S. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides. Nat. Nanotechnol. 7, 699–712 (2012).
Lopez-Sanchez, O., Lembke, D., Kayci, M., Radenovic, A. & Kis, A. Ultrasensitive photodetectors based on monolayer MoS2. Nat. Nanotechnol. 8, 497–501 (2013).
Wang, Y., Cong, C., Qiu, C. & Yu, T. Raman spectroscopy study of lattice vibration and crystallographic orientation of monolayer MoS2. Small 9, 2857–2861 (2013).
Saito, R., Tatsumi, Y., Huang, S., Ling, X. & Dresselhaus, M. S. Raman spectroscopy of transition metal dichalcogenides. J. Phys. Cond. Mater. 28, 353002 (2016).
Lee, C. et al. Anomalous lattice vibrations of single- and few-layer MoS2. ACS Nano 4, 2695–2700 (2010).
Li, H. et al. From bulk to monolayer MoS2: evolution of Raman scattering. Adv. Funct. Mater. 22, 1385–1390 (2012).
Huang, S. et al. Probing the interlayer coupling of twisted bilayer MoS2 using photoluminescence spectroscopy. Nano Lett. 14, 5500–5508 (2014).
Ji, J. et al. Giant magneto-optical Raman effect in a layered transition metal compound. Proc. Natl. Acad. Sci. USA 113, 2349–2353 (2016).
Parkin, W. M. et al. Raman shifts in electron-irradiated monolayer MoS2. ACS Nano 10, 4134–4142 (2016).
Kravets, V. G., Fan, Wu,G. H. A., Yu, T., Imaizumi, S. & Grigorenko, A. N. Measurements of electrically tunable refractive index of MoS2 monolayer and its usage in optical modulators. npj 2D Mater. Appl. 3, 36 (2019).
Ghosh, T., Bardhan, M., Bhattacharya, M. & Satpati, B. Study of inelastic mean free path of metal nanostructures using energy filtered transmission electron microscopy imaging. J. Microscopy 258, 253–258 (2015).
Iakoubovskii, K., Mitsuishi, K., Nakayama, Y. & Furuya, K. Mean free path of inelastic electron scattering in elemental solids and oxides using transmission electron microscopy: atomic number dependent oscillatory behavior. Phys. Rev. B 77, 104102 (2008).
Miao, H. et al. Hydrothermal synthesis of MoS2 nanosheets films: microstructure and formation mechanism research. Mater. Lett. 166, 121–124 (2016).
Guo, J., Zhu, H., Sun, Y., Tanga, L. & Zhang, X. Boosting the lithium storage performance of MoS2 with graphene quantum dots. J. Mater. Chem. A 4, 4783–4789 (2016).
Rietveld, H. M. A profile refinement method for nuclear and magnetic structures. J. Appl. Cryst. 2, 65–71 (1969).
Lutterotti, L. MAUD Version 1.85 (2002).
Borsella, E. et al. MoS2 nanoparticles produced by laser induced synthesis from gaseous precursors. J. Mat. Sc. Lett. 20, 187–191 (2001).
Gong, L. et al. Emergence of photoluminescence on bulk MoS2 by laser thinning and gold particle decoration. Nano Res. 11, 4574–4586 (2018).
Ye, M., Winslow, D., Zhang, D., Pandey, R. & Yap, Y. Recent advancement on the optical properties of two-dimensional molybdenum disulfide (MoS2) thin films. Photonics 2, 288 (2015).
Chakraborty, B., Matte, H. S. S. R., Sood, A. K. & Rao, C. N. R. Layer-dependent resonant Raman scattering of a few layer MoS2. J. Raman Spectrosc. 44, 92–96 (2013).
Sahoo, S., Gaur, A. P. S., Ahmadi, M., Guinel, M. J.-F. & Katiyar, R. S. Temperature-dependent Raman studies and thermal conductivity of few-layerMoS2. J. Phys. Chem. C 117, 9042–9047 (2013).
Wu, W. et al. Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics. Nature 514, 470 (2014).
Zhu, H. et al. Observation of piezoelectricity in free-standing monolayer MoS2. Nat. Nanotechnol. 10, 151–155 (2015).
Zhou, K.-G. et al. Raman modes of MoS2 used as fingerprint of van der Waals interactions in 2-D crystal-based heterostructures. ACS Nano 8, 9914–9924 (2014).
Mitra, S. et al. Magnetodielectric effect in graphene-PVA nanocomposites. J. Phys. Chem. C 115, 14285–14289 (2011).
Giannozzi, P. et al. Advanced capabilities for materials modelling with quantum ESPRESSO. J. Phys.: Cond. Mater. 29, 465901 (2017).
Giannozzi, P. et al. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys.: Cond. Mater. 21, 395502 (2009).
Perdew, J. P. et al. Restoring the density-gradient expansion for exchange in solids and surfaces. Phys. Rev. Lett. 100, 136406 (2008).
Wakabayashi, N., Smith, H. G. & Nicklow, R. M. Lattice dynamics of hexagonal MoS2 studied by neutron scattering. Phys. Rev. B 12, 659 (1975).
He, L. et al. Accuracy of generalized gradient approximation functionals for density-functional perturbation theory calculations. Phys. Rev. B 89, 064305 (2014).
Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 132, 154104 (2010).
Acknowledgements
The authors thank Prabir Pal of NPL, New Delhi for help in device fabrication. D.S. would like to acknowledge DST, India for INSPIRE faculty award (No. DST/INSPIRE/04/2015/000579) and CSC—the Finnish IT Center for Science for computational resources. The authors, S.M. and A.S. thank the Director of Bose Institute, Kolkata, India for the moral and financial support for this work.
Author information
Authors and Affiliations
Contributions
S.M. and A.S. designed and directed the project. S.S.S. prepared the sample. S.M. and S.S.S. performed the Raman spectroscopy experiments. S.M. analyzed the data and prepared the figures. D.S. performed the DFT calculations and analysis thereof with input from S.M., M.K. and A.S. S.D. performed the crystal structure analysis. B.S. performed the transmission electron microscopy on the sample. A.G. and M.K. contributed intellectually to the project. S.M. wrote the paper with input from all the authors. A.S. supervised the project. All the authors have gone through the paper and commented on it.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Mitra, S., Srivastava, D., Singha, S.S. et al. Tailoring phonon modes of few-layered MoS2 by in-plane electric field. npj 2D Mater Appl 4, 6 (2020). https://doi.org/10.1038/s41699-020-0138-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41699-020-0138-y