Protein stability limitations often hamper the exploration of proteins as drug targets. Here, we show that the application of PROSS server algorithms to the ligand-binding domain of human estrogen receptor alpha (hERα) enabled the development of variant ERPRS* that comprises 24 amino acid substitutions and exhibits multiple improved characteristics. The protein displays enhanced production rates in E. coli, crystallizes readily and its thermal stability is increased significantly by 23 °C. hERα is a nuclear receptor (NR) family member. In NRs, protein function is allosterically regulated by its interplay with small molecule effectors and the interaction with coregulatory proteins. The in-depth characterization of ERPRS* shows that these cooperative effects are fully preserved despite that 10% of all residues were substituted. Crystal structures reveal several salient features, i.e. the introduction of a tyrosine corner in a helix-loop-helix segment and the formation of a novel surface salt bridge network possibly explaining the enhanced thermal stability. ERPRS* shows that prior successes in computational approaches for stabilizing proteins can be extended to proteins with complex allosteric regulatory behaviors as present in NRs. Since NRs including hERα are implicated in multiple diseases, our ERPRS* variant shows significant promise for facilitating the development of novel hERα modulators.
Human estrogen receptor alpha (hERα) belongs to the family of nuclear receptors (NRs). NRs share high sequence and structure homology and function as important gene transcription regulators in metazoans1. In homo- and heterodimeric NRs, each protomer displays a similar modular architecture with the most prominent domains being a DNA-binding and a ligand-binding domain (LBD)1. The activity of NRs is tightly regulated by their interplay with small molecule effectors and protein binding partners, which regulate the cellular localization and the transcription regulatory activity of NRs2. Small molecule effectors acting as either agonists or antagonists bind to an identical pocket in the LBD of NRs. While agonist binding promotes the interaction of the LBD with coregulatory proteins, such as for example the interaction of hERα with the steroid receptor coactivator-2 (SRC-2) protein, binding of antagonists leads to a rearrangement of so-called helix 12 (H12), and this rearrangement precludes any further interaction with coregulators (Supplementary Fig. S1)2,3,4. These structural rearrangements have been shown in detail for hERα but details may differ in other human nuclear receptors5. Overall, the function of the LBD is to act as a ligand-triggered protein–protein interaction switch that can be tripped on by agonists and tripped off by antagonists2,4.
The human genome encodes for up to 75 different NRs, and NRs are prime drug target proteins because of their manifold involvement in development, cell homeostasis and diseases6,7,8. A textbook success story is the highly efficient regulation of the progesterone receptor by contraceptives9. hERα represents an important target on its own since hERα plays a crucial role in breast cancer and osteoporosis in postmenopausal women10. Moreover, the discovery of the beneficial effects of tamoxifen in cancer therapy in 1971 initiated an ongoing search for novel and more advanced hERα modulators11,12,13. At the same time, a number of NRs exists, the so-called orphan receptors, for which the cognate ligands remain to be identified14. The exploration of NRs as drug targets requires manifold in vitro experiments such as binding and structural studies. However, a prerequisite for such experiments, namely the availability of high amounts of pure proteins, is often hampered by low protein production yields and protein stability issues. Thus, an efficient procedure to design NR variants that show unaltered activity profile but that can be easily produced and robustly handled is very welcome.
Most proteins are only marginally stable15,16. Their low overall thermodynamic stability has been attributed to the absence of any evolutionary pressure to select for more stable variants and to the need for proteins to retain conformational flexibility for correct function17. One option to overcome the problem of marginal protein stability is to redesign protein sequences using computational methods such as those implemented in the PROSS server18. PROSS combines phylogenetic and atomistic approaches for the design of proteins with increased stability. In an initial step, a sequence blast is performed to gather phylogenetic information from homologous protein sequences in order to identify potential amino acid (AA) substitutions that can be expected to not disrupt protein fold and function. Subsequently, a position specific substitution matrix (PSSM) is calculated with these phylogenetic data, and substitutions with a PSSM score > 0 are compared to the native AAs in Rosetta19,20. All substitutions with a ΔΔGcalc better than − 0.45 of Rosetta energy units are retained, and a final Rosetta combinatorial sequence design is performed with different ΔΔGcalc cutoffs and a phylogeny-biased energy function. Overall, this procedure allows for substitutions to be included in the final design that are predicted to be neutral or singly negative according to the Rosetta calculations and are favored by phylogeny17,18.
A number of examples have been reported that illustrate the successful application of the PROSS algorithm for the design of stabilized proteins. Among these are a human acetylcholinesterase variant displaying significantly improved production yields in Escherichia coli as well as improved versions of a bacterial phosphotriesterase and a human histone deacetylase18. More recent examples include the production of a stabilized version of the kinase domain of the tyrosine kinase FLT3 in E. coli, as well as stabilized variants of the interleukin hormone IL-24, of the chromosome region maintenance 1 protein (CRM1), of an acetyl-CoA synthetase, of the malaria invasion protein RH5 and of the myocilin olfactomedin domain21,22,23,24,25,26. Furthermore, the PROSS algorithm has been integrated into a computational flow scheme that allowed for the design of two novel hydrolases with TIM-barrel folds27.
Here, we applied the PROSS algorithm to generate a significantly more stable variant of the LBD of hERα termed ERPRS*. We show that ERPRS* yields higher production rates in E. coli and displays a significant increase in thermal stability of ~ 23 °C. At the same time, all structural and functional features of hERα-LBD are retained in ERPRS* as shown by three crystal structure determinations and by an in detail characterization of the effector-binding properties of ERPRS* and the allosteric modulation of coactivator binding by different effectors. Our results demonstrate that the PROSS algorithm can be beneficially applied to a protein that comprises an elaborated allosteric regulation mechanism without affecting any of its functions.
PROSS server predictions and bioinformatic assessment
The PROSS server was used to design a more stable variant of the hERα-LBD for high yield protein production in E. coli and for further engineering25. The PROSS algorithm suggested 24 AA replacements and thereby proposed to substitute as many as 10% of all AAs present in the hERα-LBD (Fig. 1). When classifying these substitutions according to the general chemico-physical properties of AA side chains, i.e. charge, polarity and hydrophobicity, it becomes apparent that the PROSS suggestions cover all possible combinations of class-switching substitutions except for a pure charge reversal (Fig. 1a). Among the most notable exchanges are a replacement of a hydrophobic AA by a negatively charged AA (M437E) and of a backbone flexibility-enhanced glycine by a positively charged AA (G442R). As a net result, the number of charged AAs is increased by four, the number of hydrophobic AAs reduced by one and the number of uncharged polar AAs is reduced by three (Fig. 1a).
No substitutions were allowed near the ligand-binding site, the coregulator-binding site and the dimerization interface in order to preclude changes in the functional behavior of hERα. When taking this into account, it appears that the substitutions are evenly distributed across the entire hERα-LBD (Fig. 1b). A possible trend seems to be that the PROSS algorithm prefers solvent exposed residues since 83% of the substituted AAs are located at the protein’s surface (Fig. 1b). However, if one considers that 74% of the hERα-LBD AAs are classified as non-core residues according to the EPPIC server then this observation seems less significant28.
In a first step, the PROSS algorithm performs an automated phylogeny search and clustering analysis to identify potentially beneficial substitutions. This step is followed by partly phylogeny-biased atomistic calculations. To better understand the decision making process of the algorithm and the underlying phylogenetic analysis, all PROSS-suggested substitutions were retrospectively reevaluated with a knowledge-based phylogenetic analysis using the software R29. For this purpose, 475 reviewed AA sequences anotated as containing a NR-LBD on PROSITE (PROSITE entry: PS51843) were retrieved and truncated to the respective NR-LBD segment30. Duplicates were excluded, and the resulting 422 sequences aligned with ClustalW31. With regard to this multiple alignment, the mean relative frequency of all substitutions proposed by the PROSS algorithm is nearly 19%. By contrast, the mean relative frequency of the native AAs initially present at these positions is only 11%. For 46% of all proposed substitutions, the most abundant AA was chosen, and for 75% of the cases, one of the three most frequently observed AAs at a given position was selected (Supplementary Fig. S2). Only one outlier can be identified, namely the PROSS-proposed introduction of Tyr341, which exhibits a relative frequency of only 0.3% at this position in the multiple sequence alignment.
ERPRS* is properly folded and displays improved thermal stability
Four different protein variants were produced recombinantly in E. coli to experimentally validate the PROSS results (Table 1). A human hERα-LBD variant, covering residues 304–548 of the wild-type sequence and termed ERWT* from here on, was produced as a reference. In this variant, three cysteine residues are replaced by serines (C381S, C417S and C530S) in order to preclude undesired cysteine oxidation and erroneous disulfide bridge formation (Table 1). Variant ERPRS* copies the design of ERWT* and at the same time displays all 24 AA substitutions suggested by PROSS. Two additional variants, i.e. ERPRS*(+) and ERPRS*(−), were produced to facilitate protein crystallization and structural studies. These variants are identical to ERPRS*, but contain one or two additional AA exchanges that have been shown to improve the crystallization behavior of hERα when crystallized with small molecule agonists (in case of ERPRS*(+)) or antagonists (ERPRS*(−)) (Table 1)4,32. Whereas the Y537S substitution present in ERPRS*(+) helps to fix helix H12 in the coregulator-binding-active conformation, the substitutions L372R and L536S in ERPRS*(−) favor an alternative positioning of H12 as observed in the inactive conformation of hERα (Supplementary Fig. S1).
All ERPRS* variants yielded protein amounts in the range of 30–60 mg of pure protein per liter of bacterial cell culture. By contrast, purification of ERWT* resulted in only approximately 10 mg protein per liter (data not shown). Interestingly, and similar to the wild-type protein, all ERPRS* variant proteins co-sedimented with the insoluble cell debris and consequently had to be solubilized with urea prior to any further purification steps. Overall, the purification protocol of all variants closely resembles that of the wild-type hERα-LBD protein33.
Circular dichroism (CD) measurements were performed to investigate whether the variant ERPRS* is properly folded. The CD spectra of the wild-type protein ERWT* and of the PROSS-designed variant ERPRS* share the same x axis intercept (201 nm) and show identical curve progressions in agreement with CD spectra of predominantly α-helical proteins (Fig. 2a)34. Thus, ERWT* and ERPRS* display highly similar secondary structure compositions and likely the same protein fold (see also below).
To further validate the success of the PROSS design, the thermal stability was monitored by examining the ratio of folded versus unfolded protein in a temperature interval of 20–90 °C using identical heating rates, buffer conditions and protein concentrations (Fig. 2b, Supplementary Fig. S3). Whereas wild-type ERWT* unfolds at 52.5 °C, the melting temperature (TM) of ERPRS* is considerably higher, namely 75.3 °C. It should be noted that the thermal unfolding of both ERWT* and ERPRS* is not reversible. Therefore, these experiments do not allow discussion of equilibrium thermodynamic stabilities. Nevertheless, these experiments clearly reveal that protein production yields are significantly increased in case of ERPRS* and that the thermal stability of PROSS-designed ERPRS* is about ~ 23 °C higher than that of ERWT*.
Functional in vitro characterisation of ERPRS*
Detailed affinity measurements were conducted in order to investigate whether the ligand and protein interaction profile of hERα-LBD is retained in ERPRS* in spite of the presence of 24 AA substitutions. In case of the ligand genistein, only a small difference in binding affinities is observed between ERWT* and ERPRS* (Kd of 160 nM versus 143 nM) (Table 2, Fig. 3). Notwithstanding this, the thermodynamic parameters ΔH and TΔS differ considerably between the two proteins, with higher absolute values observed for ERWT* (ΔH = − 83.0 kJ/mol, TΔS = − 44.2 kJ/mol) than for ERPRS* (ΔH = − 66.3 kJ/mol, TΔS = − 27.2 kJ/mol). In case of the natural ligand estradiol, both proteins share nearly identical affinities (79 nM and 84 nM for ERWT* and ERPRS*, respectively) (Table 2). The thermodynamic parameters ΔH and TΔS show again a similar trend as previously observed for genistein. However, in case of estradiol, the differences in ΔH and TΔS appear only marginal and amount to about 5 kJ/mol in both the enthalpy and entropy term (Table 2).
The function of hERα-LBD extends beyond that of a mere ligand-binding protein since ligand binding triggers in addition an allosteric rearrangement of H12 that either favors or disfavors coregulator binding (Supplementary Fig. S1). In order to investigate whether this allosteric mechanism is retained in ERPRS*, additional affinity measurements were performed with ERPRS* and a coactivator peptide corresponding to residues 686–699 of the SRC-2 protein and containing the sequence of SRC-2’s nuclear receptor interaction motif 23. SRC-2-binding affinities were measured for ERPRS* alone, ERPRS* incubated with the agonist estradiol and incubated with the antagonist raloxifene (Table 2). In its apo form, ERPRS* binds to SRC-2 but with an affinity that can be estimated to be lower than 100 µM. Due to this low affinity, the Wiseman c-value was < 0.5 in the experimental setup, and therefore the data allowed only for an estimation of the dissociation constant35. This weak interaction can be completely abrogated by adding the antagonist raloxifene to the system. By contrast, for ERPRS* bound to the agonist estradiol, the affinity increases to 401 nM (Fig. 3, Table 2). The latter value compares well to the previously reported value of 175 nM36. In view of this pronounced ligand-triggered modulation of coactivator binding, it seems reasonable to conclude that the allosteric signal conduction is not influenced by the mutations and that variant ERPRS* appears fully functional.
Structural chracterisation of ERPRS*
The ERPRS* variants ERPRS*(+), and ERPRS*(−) were crystallized in order to visualize the structural implications of the PROSS-suggested substitutions. As stated before, the conformation of the LBD is stabilized in either the canonical active (ERPRS*(+)) or inactive (ERPRS*(−)) conformation in these two variants, thereby considerably improving their crystallization behavior4,32. Structures of ERPRS*(+) were determined in complex with the coactivator peptide SRC-2 and two different agonist ligands, namely either in presence of the ligand estradiol or the phytohormone genistein, and refined to resolutions of 1.45 and 1.33 Å, respectively. The structure of ERPRS*(−) was solved in complex with the antagonist raloxifene at a resolution of 1.6 Å (Table 3). Homomeric dimers are observed in all crystal structures, and each structure is nearly undistinguishable from the wild-type hERα-LBD structures in complex with the identical ligands and coactivator peptide available from the protein databank (PDB) (Fig. 4, Supplementary Fig. S4, Supplementary Table S2)37. No pronounced changes can be detected in the overall structures of these 12 helices-containing proteins (H1–H12) as shown by the low RMSDCα values of 0.5–0.8 Å obtained upon superposition of all equivalent Cα atoms in the compared structures (Supplementary Table S2). This also extends to the position and conformation of the SRC-2 peptide in the estradiol and genistein complexes. A few minor conformational deviations can be observed in some surface loops in the various structures (Fig. 4, Supplementary Fig. S4).
As expected from the closely matching ligand-binding affinities of ERPRS* and ERWT*, the fine details of all ligand-binding interactions are retained between variants ERPRS* and wild-type hERα-LBD. The superposition of the different binding sites shows that the positioning of the ligands and the surrounding AAs are perfectly congruent between ERPRS* and wild-type hERα-LBD (Fig. 4, Supplementary Fig. S4). Not only are all specific polar contacts between the ligands and the AAs Arg394, Glu353 and His524 conserved but also the T-shaped π-stacking between the aromatic portions of the different ligands and the Phe404 benzene ring. Moreover, water molecules bridging between ligands and protein side chains appear also fully conserved.
ERPRS* displays 24 substitutions and these substitutions increase the thermal stability of hERα-LBD by ~ 23 °C in comparison to ERWT*. The crystal structures show that 20 of the 24 substituted AAs are surface-located, and the mutated AAs introduce four additional surface charges and the formation of five novel salt bridges. Between two and four substitutions appear to either improve the packing or the extent of the hydrophobic core. Without doubts, additional mutational experiments will be required to identify the exact contributions of newly introduced interactions to the increased thermal stability. Nevertheless, a number of structural features appear worthwhile highlighting.
The S341Y substitution at the beginning of helix H3 introduces a feature that closely resembles the tyrosine corner observed in β-sandwich structures such as for example in FNIII domains (Fig. 5a,b)38,39. In ERPRS*, the hydroxyl group of Tyr341 forms a hydrogen bond with the main chain nitrogen of Asp332 from the preceding loop. At the same time, the benzene ring of Tyr341 is within the right distance to Arg335 to form an inter-side chain cation-π interaction and thereby possibly stabilizing the positioning of Tyr341 and in turn the loop that interconnects H2 to H3 (Fig. 5a,b). Conversely, Ser341 is not able to form a similar interaction in wild-type hERα-LBD.
The substitutions S433E and M437E allow for the formation of a novel network of salt bridges not present in wild-type hERα-LBD (Fig. 5c,d). While the salt bridges involving Arg436 and Arg434 are formed with residues that are all displayed from the same helix H8, an additional inter-subunit salt bridge with a distance slightly over 4 Å is formed between Glu437 and Lys472’ from the second monomer, and the latter interaction might therefore contribute to the stabilization of the dimer assembly (Fig. 5c,d).
Finally, the substitution G442R located in the N-terminal turn of helix H8 introduces an additional surface charge and a water mediated interaction with Glu323 in ERPRS* (Fig. 5e,f). At a first glance, this substitution appears unlikely since this exchange introduces a dramatic change in size, charge and polarity. Moreover, a glycine residue can explore a wider range of main chain dihedral angles than non-glycine residues. However, inspection of Gly442 in wild-type hERα-LBD reveals that Gly442 displays α-helical dihedral angles and these remain unaltered upon exchange of this residue against arginine in ERPRS* (data not shown). The hydrophobic portion of the side chain of Arg442 in ERPRS* forms a number of additional hydrophobic interactions with residues such as Leu320, Trp393, Phe445 and Val446, which cannot be formed when a glycine is present at position 442 (Fig. 5e,f).
Of the ERPRS* AAs discussed above, Tyr341 displayed the lowest relative frequency in the phylogenetic analysis (0.3%) while relatively low values were also observed for Glu433 (7.4%) and Arg442 (5.0%) (Supplementary Fig. S2). However, the structures reveal clear benefits arising from these substitutions, in testimony of the importance of the atomistic side chain-packing calculations included in the PROSS algorithm18.
The PROSS server calculations proved to be highly beneficial for the stabilization of the hERα-LBD. Using PROSS, a protein variant ERPRS* was designed that displays multiple enhanced general characteristics. ERPRS* can be produced with high yields in E. coli and displays a drastically improved thermal stability. Furthermore, ERPRS* and more precisely ERPRS*(+) together with agonists and coactivator peptide and ERPRS*(−) in complex with an antagonist crystallize readily and yielded crystals diffracting reproducibly to resolutions of up to 1.33 Å. Notably, in case of ERPRS*(+), crystals grew within hours. This significantly improved protein handling and crystallization behavior shows promise for the integration of such variants into semi-automated experimental flow schemes aiming at identifying novel estrogen receptor modulators. Such flow schemes could also target the identification of potent estrogen receptor degraders40. The latter structurally destabilize wild-type hERα and trigger the degradation of hERα in the cell. Here, our ERPRS* variants might be beneficial due to their enhanced stability. Compared to hERα, the PROSS-designed variant ERPRS* also seems to be better suited for in vitro characterizations such as high-throughput binding assays due to the high stability, production yields and the substitution of surface cysteines, abrogating the need for the addition of reducing agents, which can significantly impact the experimental results. Since hERα is involved in many pathological processes such as cancer and osteoporosis, the aggregated improved characteristics of ERPRS* show promise for facilitating the further exploration of hERα as a drug target.
Despite many published examples of proteins stabilized by tools such as PROSS or Fireprot41, no such study has been published to the best of our knowledge on a protein with such a complex allosteric regulatory mechanism as present in hERα. Moreover, with about 10% of all AAs mutated, it was highly questionable whether the conformational flexibility required for the allosteric regulation of hERα function could be preserved in ERPRS*. In the present study, it is shown that ERPRS* retains all functional and structural features characterizing the wild-type protein. The affinity and thermodynamic characteristics of the interaction between ERPRS* and its native agonist estrogen as well as to the phytoestrogen genistein remain unaltered by the 24 substitutions. This also extends to the structural binding characteristics of the antagonist raloxifene and to the resulting inhibition of coactivator binding.
In addition to small molecule ligand binding, hERα functions as a ligand-triggered protein–protein interaction switch. To check whether the allosteric coupling between coregulator protein binding and small molecule effector binding is preserved in ERPRS*, the SRC-2 coactivator peptide-binding affinity was investigated in the presence of an agonist, an antagonist and in the absence of any affinity-modulating small molecule. Agonist-bound ERPRS* displays a coactivator-binding affinity of 401 nM, whereas the affinity is in the low mM range in the absence of any small molecule effector (> 0.1 mM). Moreover, no detectable coactivator-binding affinity is observed upon binding of the antagonist raloxifene. This clearly shows that the small molecule-triggered modulation of the binding affinity of hERα to its coactivator peptide is perfectly retained in ERPRS*.
The crystal structures clearly demonstrate that the ligand-triggered switching between the active and inactive conformation of hERα is fully preserved in ERPRS*. This is underlined by the low RMSDCα values between the structures of ERPRS* and hERα bound to the corresponding ligands. This appears remarkable since the hERα-LBD was optimized using solely the agonist-bound structure for the PROSS calculations, namely hERα in complex with estradiol and SRC-1. At the same time, the antagonist-bound structure differs significantly from the agonist-bound structure due to the distinct repositioning of H12, which is essential for hERα function. The preserved repositioning of H12 might be a direct consequence of the inclusion of phylogenetic considerations in the PROSS calculations. These render it unlikely that highly conserved residues important for the intramolecular signal transduction and conformational changes are being substituted. These anticipated beneficial effects resulting from the inclusion of phylogenetic data beg the question of whether phylogeny should be used in a broader manner and more readily during the design of binding pockets and the optimization of catalytic sites.
The advances achieved by applying PROSS to hERα might be readily transferable to other NR-LBDs since NRs share extended sequence and structure similarities. The very high number of available NR sequences allows for extended and detailed phylogenetic analyses and it appears likely that these significantly contributed to the success of PROSS in the redesign of hERα. One could argue that, by using a PSSM matrix for defining the set of AAs to be considered at individual positions, the wealth of possibilities offered by all twenty natural AAs is unnecessarily restricted. However, in the case of hERα, the PROSS approach still allowed for various unexpected substitutions and structural features, as highlighted by the posterior phylogenetic analysis and the crystal structures. It is possible that the tremendous increase in thermal stability of ~ 23 °C is caused by a combined effect of the five newly introduced salt bridges, the newly introduced tyrosine corner and the four additional surface charges. As previously observed, all these structural features can have a significant impact on protein stability42,43. However, it has to be mentioned that salt bridges can also decrease protein stability44. Possibly, the phylogenetic analysis included in PROSS helped to prevent the introduction of detrimental point mutations (see above).
ERPRS* described here reemphasizes the potential of PROSS for the design of more stable protein variants. Extending beyond previous successes, the design and characterization of ERPRS* impressively shows that the phylogeny-based approach of PROSS can be also successfully applied to the optimization of allosterically regulated proteins, even though our understanding of intramolecular allosteric communication pathways still remains fragmental and the nature of allostery remains controversially discussed to the present day45,46. Given the importance of NRs in cell homeostasis and signal transduction, it can be expected that the success reported here will encourage and facilitate further exploration of these key proteins as drug targets.
Bioinformatical engineering of ERPRS*
The PROSS server was used with default settings and the structure of hER-LBD in complex with its natural ligand estradiol and bound to the coactivator peptide SRC-1 (PDB code: 3UUD) as an input model37,47. AA substitutions within a 5 Å distance of the dimerization interface or within a 8 Å radius of either the bound ligand or residues interacting with the coactivator peptide were excluded from the calculations in order to preclude adverse effects on protein function.
Protein production and purification
The partially optimized protein production and purification protocol parallels that published by Ferrero et al.33. The codon-optimized genes of the wild-type hER-LBD (residues 304–548, UNIPROT entry P03372-1) or of the different variants (Table 1) were inserted into the multiple cloning site of a pET15b vector48. In all plasmid constructs, a N-terminal hexahistidine tag and a segment encoding for a tobacco etch virus (TEV) protease cleavage site precede the segment encoding for the target protein.
The plasmids harboring the different variants were transformed into chemically competent E. coli BL21 (DE3) Star cells (Invitrogen, Carlsbad, USA). Terrific Broth cultures were inoculated with overnight precultures and were grown at 37 °C prior to the induction of protein expression at an OD600 of 1.5 with 0.5 mM IPTG and continuing shaking for 20 h at 18 °C. The cells were harvested by centrifugation and resuspended in 50 mM HEPES, 500 mM NaCl, 20 mM imidazole, 1 mM EDTA, 0.5 mM AEBSF, pH 8.0. The cells were disrupted by sonication, and the solution centrifuged at 8000×g for 1 h. The supernatant was discarded, and the pellet was resolubilized in 100 mM NDSB 201, 50 mM HEPES, 50 mM NaCl, 20 mM imidazole, 4 M urea, 1 mM EDTA, 0.5 mM AEBSF and pH 8.0 and centrifuged at 100,000×g for 1 h.
The supernatant was loaded onto a preequilibrated HisTrap FF column (GE Healthcare, Boston, USA), and the column washed with 50 mM HEPES, 500 mM NaCl, 20 mM imidazole and pH 8.0. The protein variants were eluted using a step gradient ranging from the washing buffer to 50 mM HEPES, 300 mM NaCl, 500 mM imidazole, pH 8.0. The peak fractions were pooled. The hexahistidine tag was removed by adding TEV protease to the protein solution at a mass ratio of 1:1,000 while dialyzing the protein solution against 50 mM HEPES, 500 mM NaCl, 20 mM imidazole, 2.5 mM DTT, 0.5 mM EDTA, pH 8.0 for 16 h and subsequently against 50 mM HEPES, 500 mM NaCl, 20 mM imidazole, pH 8.0 for 4 h. To remove the hexahistidine-tagged TEV protease and any remaining uncleaved protein, a second affinity chromatography step was performed analogously to the first one, but pooling the flow-through fraction instead. As a final purification step, a size exclusion chromatography was performed with a HiLoad 26/600 Superdex 75 pg column (GE Healthcare) using a 25 mM HEPES, 150 mM NaCl, pH 8.0 buffer. The pure protein fractions were pooled, flash-frozen in liquid nitrogen and stored at − 80 °C.
The secondary structure content and the thermal stability of the wild-type protein and the stabilized mutant were investigated using a J-815 CD spectrometer (JASCO, Pfungstadt, Germany). Prior to the experiments, the protein solutions were incubated with dextran-coated charcoal (Sigma-Aldrich) while agitating for at least 6 h, followed by a buffer exchange into a 10 mM KH2PO4/K2HPO4, pH 8.0 buffer using a PD MiniTrap G-25 column (GE Healthcare). CD spectra for the secondary structure determination were recorded by accumulating 10 ellipticity measurements of a 5 µM protein solution between 185 and 260 nm with 1 mm optical path length and 20 nm/min scanning speed.
The denaturation experiments were performed in triplicate with a protein concentration of 0.75 µM and 10 mm path length. The samples were heated at a speed of 1 degree per minute in the temperature interval of 20–90 °C, and the ellipticity was monitored at 222 nm. The melting temperatures were determined using the software Spectra Manager (JASCO).
Isothermal titration calorimetry
Isothermal titration calorimetry (ITC) experiments were performed with a Standard Volume Nano ITC (TA Instruments, New Castle, USA) and a 24 K gold cell. The protein solutions were incubated first with dextran-coated charcoal at 16 °C for 24 h while gently agitating in order to remove any lipophilic contaminant potentially occupying the effector-binding site. After centrifugation, the solutions were dialyzed repeatedly against 100 mM KH2PO4/K2HPO4, 150 mM NaCl, pH 7.2.
To determine the thermodynamic parameters of the interaction between the protein variant and the ligands estradiol and genistein, the ligands were dissolved in the dialysis buffer of the corresponding protein sample, and the ligand solutions were heated to 80 °C while agitating for 1 h. The ligand concentrations were determined photometrically, and the protein solution was titrated subsequently into the ligand solution.
The affinity between the protein variant and the coactivator peptide SRC-2 was investigated in the presence of the agonist estradiol, the antagonist raloxifene and in the absence of any effector. The coactivator peptide with the sequence KHKILHRLLQDSSS corresponding to residues 686–699 of the SRC-2 protein (UNIPROT entry Q15596) was N-terminally acetylated and C-terminally amidated3,48. The peptide was synthesized using Fmoc-based solid-phase synthesis, as previously described49. For the measurements in presence of effectors, the protein variant was incubated first with either solid powder of estradiol or raloxifene for 16 h at 16 °C while gently agitating. The protein solution was titrated into the peptide solution in all experiments.
All measurements were performed in triplicate with degassed solutions. Each measurement consisted of 25 incremental titrations (1 × 5 µL, 24 × 10 µL) interspaced by 360 s time intervals at 25 °C and 150 rpm stirring rate. Additionally, blank titrations with protein only were performed and the ITC measurements were corrected using the determined constant. The data were processed using the NanoAnalyze Software v3.11.0 (TA Instruments) with fixed integration intervals and manually checked baselines.
Crystallization and crystal structure determinations
All protein solutions were incubated first with dextran-coated charcoal, gently rocked for 24 h at 16 °C and subsequently centrifuged. To determine the crystal structures of the stabilized protein in the agonist-bound active conformation, a solution consisting of 350 µM ERPRS*(+) and 1.4 mM SRC-2 was prepared in a 25 mM HEPES, 10% glycerol, pH 8 buffer. Either solid genistein or estradiol was added, and the solution incubated for 16 h while agitating. For the structure of the protein stabilized in the antagonist-bound inactive conformation, 700 µM ERPRS*(−) in 25 mM HEPES and pH 8 were incubated with solid raloxifene for 72 h while agitating. Screening for crystallization conditions was performed in 96-well plates with commercially available screens using the sitting-drop vapor diffusion technique. Initial hits were optimized manually using the hanging-drop method.
In case of both agonist-bound complexes, single plate-shaped crystals could be obtained within 16 h with droplets consisting of 2 µL protein solution, 2 µL reservoir solution (200 mM NaCl, 100 mM Tris pH 8.5 and 25% polyethylene glycol 3,350) and 0.4 µL water equilibrated over 700 µL reservoir solution. Trapezoid like crystals of ERPRS*(−) in complex with raloxifene grew after around 3 months in droplets consisting of 0.2 µL protein solution and 0.4 µL reservoir solution (0.2 M sodium chloride, 0.1 M BIS–TRIS pH 5.5, 25% w/v polyethylene glycol 3,350) equilibrated over 70 µL reservoir solution. All crystals were cryo-protected with 20–30% ethylene glycol and flash-frozen in liquid nitrogen prior to data collection.
Diffraction data sets were collected at the synchrotron beamlines BL 14.1 and BL 14.2 at BESSY-II in Berlin50. The raw diffraction images were processed with the program XDS51, and the phase problem was solved using the program PHASER within the PHENIX software suite52 with previously published structures of wild-type hERα-LBD in complex with estradiol (PDB code: 3UUD) and raloxifene (PDB code: 2QXS) as search models. The models were refined via alternating cycles of automated coordinate refinement with PHENIX and manual building in the program COOT53. The RMSDCα values between the wild-type and the stabilized structures were calculated with LSQKAB from the CCP4 program suite54. All structure illustrations were drawn using Pymol55.
Accession code Protein Data Bank: the coordinates and structure factors have been deposited with the Protein Data Bank under accession codes 7NFB, 7NEL, 7NDO.
Owen, G. I. & Zelent, A. Origins and evolutionary diversification of the nuclear receptor superfamily. Cell Mol. Life Sci. 57, 809–827. https://doi.org/10.1007/s000180050043 (2000).
Nagy, L. & Schwabe, J. W. Mechanism of the nuclear receptor molecular switch. Trends Biochem. Sci. 29, 317–324. https://doi.org/10.1016/j.tibs.2004.04.006 (2004).
Voegel, J. J. et al. The coactivator TIF2 contains three nuclear receptor-binding motifs and mediates transactivation through CBP binding-dependent and -independent pathways. EMBO J. 17, 507–519. https://doi.org/10.1093/emboj/17.2.507 (1998).
Bruning, J. B. et al. Coupling of receptor conformation and ligand orientation determine graded activity. Nat. Chem. Biol. 6, 837–843. https://doi.org/10.1038/nchembio.451 (2010).
Merk, D. et al. Molecular tuning of farnesoid X receptor partial agonism. Nat. Commun. 10, 2915. https://doi.org/10.1038/s41467-019-10853-2 (2019).
Robinson-Rechavi, M., Carpentier, A. S., Duffraisse, M. & Laudet, V. How many nuclear hormone receptors are there in the human genome?. Trends Genet. 17, 554–556. https://doi.org/10.1016/s0168-9525(01)02417-9 (2001).
Kumar, R., Kumari, B., Srivastava, A. & Kumar, M. NRfamPred: a proteome-scale two level method for prediction of nuclear receptor proteins and their sub-families. Sci. Rep. 4, 6810. https://doi.org/10.1038/srep06810 (2014).
Santos, R. et al. A comprehensive map of molecular drug targets. Nat. Rev. Drug Discov. 16, 19–34. https://doi.org/10.1038/nrd.2016.230 (2017).
Madauss, K. P., Stewart, E. L. & Williams, S. P. The evolution of progesterone receptor ligands. Med. Res. Rev. 27, 374–400. https://doi.org/10.1002/med.20083 (2007).
Deroo, B. J. & Korach, K. S. Estrogen receptors and human disease. J. Clin. Invest. 116, 561–570. https://doi.org/10.1172/JCI27987 (2006).
Cole, M. P., Jones, C. T. & Todd, I. D. A new anti-oestrogenic agent in late breast cancer. An early clinical appraisal of ICI46474. Br. J. Cancer 25, 270–275. https://doi.org/10.1038/bjc.1971.33 (1971).
Bafna, D., Ban, F., Rennie, P. S., Singh, K. & Cherkasov, A. Computer-Aided Ligand Discovery for Estrogen Receptor Alpha. Int. J. Mol. Sci. 21. https://doi.org/10.3390/ijms21124193 (2020).
Maximov, P. Y., Lee, T. M. & Jordan, V. C. The discovery and development of selective estrogen receptor modulators (SERMs) for clinical practice. Curr. Clin. Pharmacol. 8, 135–155. https://doi.org/10.2174/1574884711308020006 (2013).
Giguere, V. Orphan nuclear receptors: From gene to function. Endocr. Rev. 20, 689–725. https://doi.org/10.1210/edrv.20.5.0378 (1999).
Savage, H. J., Elliott, C. J., Freeman, C. M. & Finney, J. L. Lost hydrogen bonds and buried surface area: rationalising stability in globular proteins. J. Chem. Soc. Faraday Trans. 89, https://doi.org/10.1039/ft9938902609 (1993).
Dill, K. A. Dominant forces in protein folding. Biochemistry 29, 7133–7155. https://doi.org/10.1021/bi00483a001 (1990).
Goldenzweig, A. & Fleishman, S. J. Principles of protein stability and their application in computational design. Annu. Rev. Biochem. 87, 105–129. https://doi.org/10.1146/annurev-biochem-062917-012102 (2018).
Goldenzweig, A. et al. Automated structure- and sequence-based design of proteins for high bacterial expression and stability. Mol. Cell 63, 337–346. https://doi.org/10.1016/j.molcel.2016.06.012 (2016).
Altschul, S. F., Gertz, E. M., Agarwala, R., Schaffer, A. A. & Yu, Y. K. PSI-BLAST pseudocounts and the minimum description length principle. Nucleic Acids Res. 37, 815–824. https://doi.org/10.1093/nar/gkn981 (2009).
Whitehead, T. A. et al. Optimization of affinity, specificity and function of designed influenza inhibitors using deep sequencing. Nat. Biotechnol. 30, 543–548. https://doi.org/10.1038/nbt.2214 (2012).
Georgoulia, P. S., Bjelic, S. & Friedman, R. Deciphering the molecular mechanism of FLT3 resistance mutations. FEBS J. https://doi.org/10.1111/febs.15209 (2020).
Zahradnik, J. et al. Flexible regions govern promiscuous binding of IL-24 to receptors IL-20R1 and IL-22R1. FEBS J. 286, 3858–3873. https://doi.org/10.1111/febs.14945 (2019).
Lei, Y. et al. Engineering chromosome region maintenance 1 fragments that bind to nuclear export signals. Protein Sci. https://doi.org/10.1002/pro.3724 (2019).
Trudeau, D. L. et al. Design and in vitro realization of carbon-conserving photorespiration. Proc. Natl. Acad. Sci. USA 115, E11455–E11464. https://doi.org/10.1073/pnas.1812605115 (2018).
Campeotto, I. et al. One-step design of a stable variant of the malaria invasion protein RH5 for use as a vaccine immunogen. Proc. Natl. Acad. Sci. USA 114, 998–1002. https://doi.org/10.1073/pnas.1616903114 (2017).
Hill, S. E. et al. Stable calcium-free myocilin olfactomedin domain variants reveal challenges in differentiating between benign and glaucoma-causing mutations. J. Biol. Chem. 294, 12717–12728. https://doi.org/10.1074/jbc.RA119.009419 (2019).
Lapidoth, G. et al. Highly active enzymes by automated combinatorial backbone assembly and sequence design. Nat. Commun. 9, 2780. https://doi.org/10.1038/s41467-018-05205-5 (2018).
Bliven, S., Lafita, A., Parker, A., Capitani, G. & Duarte, J. M. Automated evaluation of quaternary structures from protein crystals. PLoS Comput. Biol. 14, e1006104. https://doi.org/10.1371/journal.pcbi.1006104 (2018).
R: A Language and Environment for Statistical Computing v. 3.6.3 (R Foundation for Statistical Computing, Vienna, Austria, 2020).
Sigrist, C. J. et al. New and continuing developments at PROSITE. Nucleic Acids Res. 41, D344-347. https://doi.org/10.1093/nar/gks1067 (2013).
Larkin, M. A. et al. Clustal W and Clustal X version 2.0. Bioinformatics 23, 2947–2948. https://doi.org/10.1093/bioinformatics/btm404 (2007).
Nettles, K. W. et al. NFkappaB selectivity of estrogen receptor ligands revealed by comparative crystallographic analyses. Nat. Chem. Biol. 4, 241–247. https://doi.org/10.1038/nchembio.76 (2008).
Ferrero, V. E. et al. Rational modification of estrogen receptor by combination of computational and experimental analysis. PLoS ONE 9, e102658. https://doi.org/10.1371/journal.pone.0102658 (2014).
Greenfield, N. J. Using circular dichroism spectra to estimate protein secondary structure. Nat. Protoc. 1, 2876–2890. https://doi.org/10.1038/nprot.2006.202 (2006).
Wiseman, T., Williston, S., Brandts, J. F. & Lin, L.-N. Rapid measurement of binding constants and heats of binding using a new titration calorimeter. Anal. Biochem. 179, 131–137. https://doi.org/10.1016/0003-2697(89)90213-3 (1989).
Bramlett, K. S., Wu, Y. & Burris, T. P. Ligands specify coactivator nuclear receptor (NR) box affinity for estrogen receptor subtypes. Mol. Endocrinol. 15, 909–922. https://doi.org/10.1210/mend.15.6.0649 (2001).
Rose, P. W. et al. The RCSB protein data bank: Integrative view of protein, gene and 3D structural information. Nucleic Acids Res. 45, D271–D281. https://doi.org/10.1093/nar/gkw1000 (2017).
Hemmingsen, J. M., Gernert, K. M., Richardson, J. S. & Richardson, D. C. The tyrosine corner: A feature of most Greek key beta-barrel proteins. Protein Sci. 3, 1927–1937. https://doi.org/10.1002/pro.5560031104 (1994).
Muller, Y. A., Ultsch, M. H. & de Vos, A. M. The crystal structure of the extracellular domain of human tissue factor refined to 1.7 A resolution. J. Mol. Biol. 256, 144–159. https://doi.org/10.1006/jmbi.1996.0073 (1996).
Lai, A. C. & Crews, C. M. Induced protein degradation: An emerging drug discovery paradigm. Nat. Rev. Drug Discov. 16, 101–114. https://doi.org/10.1038/nrd.2016.211 (2017).
Musil, M. et al. FireProt: Web server for automated design of thermostable proteins. Nucleic Acids Res. 45, W393–W399. https://doi.org/10.1093/nar/gkx285 (2017).
Perl, D., Mueller, U., Heinemann, U. & Schmid, F. X. Two exposed amino acid residues confer thermostability on a cold shock protein. Nat. Struct. Biol. 7, 380–383. https://doi.org/10.1038/75151 (2000).
Hamill, S. J., Cota, E., Chothia, C. & Clarke, J. Conservation of folding and stability within a protein family: The tyrosine corner as an evolutionary cul-de-sac. J. Mol. Biol. 295, 641–649. https://doi.org/10.1006/jmbi.1999.3360 (2000).
Bosshard, H. R., Marti, D. N. & Jelesarov, I. Protein stabilization by salt bridges: Concepts, experimental approaches and clarification of some misunderstandings. J. Mol. Recognit. 17, 1–16. https://doi.org/10.1002/jmr.657 (2004).
Liu, J. & Nussinov, R. Allostery: An overview of its history, concepts, methods, and applications. PLoS Comput. Biol. 12, e1004966. https://doi.org/10.1371/journal.pcbi.1004966 (2016).
Motlagh, H. N., Wrabl, J. O., Li, J. & Hilser, V. J. The ensemble nature of allostery. Nature 508, 331–339. https://doi.org/10.1038/nature13001 (2014).
Delfosse, V. et al. Structural and mechanistic insights into bisphenols action provide guidelines for risk assessment and discovery of bisphenol A substitutes. Proc. Natl. Acad. Sci. USA 109, 14930–14935. https://doi.org/10.1073/pnas.1203574109 (2012).
UniProt, C. UniProt: a worldwide hub of protein knowledge. Nucleic Acids Res. 47, D506–D515. https://doi.org/10.1093/nar/gky1049 (2019).
Haussner, C. et al. Peptide paratope mimics of the broadly neutralizing HIV-1 antibody b12. ChemBioChem 18, 647–653. https://doi.org/10.1002/cbic.201600621 (2017).
Mueller, U. et al. The macromolecular crystallography beamlines at BESSY II of the Helmholtz-Zentrum Berlin: Current status and perspectives. Eur. Phys. J. Plus 130. https://doi.org/10.1140/epjp/i2015-15141-2 (2015).
Kabsch, W. Xds. Acta Crystallogr. D Biol. Crystallogr. 66, 125–132. https://doi.org/10.1107/S0907444909047337 (2010).
Liebschner, D. et al. Macromolecular structure determination using X-rays, neutrons and electrons: Recent developments in Phenix. Acta Crystallogr. D Struct. Biol. 75, 861–877. https://doi.org/10.1107/S2059798319011471 (2019).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D Biol. Crystallogr. 66, 486–501. https://doi.org/10.1107/S0907444910007493 (2010).
Winn, M. D. et al. Overview of the CCP4 suite and current developments. Acta Crystallogr. D Biol. Crystallogr. 67, 235–242. https://doi.org/10.1107/S0907444910045749 (2011).
Schrodinger, LLC. The PyMOL Molecular Graphics System, Version 1.8 (2015).
We would like to thank Johanna Schürlein (FAU Erlangen-Nuremberg) for help with protein production and characterization. We would also like to thank Manfred Weiss, Uwe Müller and the MX team from the HZB Berlin for help with diffraction data collection at BESSY synchrotron.
Open Access funding enabled and organized by Projekt DEAL.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kriegel, M., Wiederanders, H.J., Alkhashrom, S. et al. A PROSS-designed extensively mutated estrogen receptor α variant displays enhanced thermal stability while retaining native allosteric regulation and structure. Sci Rep 11, 10509 (2021). https://doi.org/10.1038/s41598-021-89785-1
This article is cited by
De novo prediction of explicit water molecule positions by a novel algorithm within the protein design software MUMBO
Scientific Reports (2023)
Computational redesign of taxane-10β-hydroxylase for de novo biosynthesis of a key paclitaxel intermediate
Applied Microbiology and Biotechnology (2023)