Introduction

Gravity is greatly simplified in oceanography from a three-dimensional vector field [g = (gλ, gφ, gz)] with (λ, φ, z) being the (longitude, latitude, height) and (i, j, k) being the corresponding unit vectors with eastward positive for i, northward positive for j, and upward positive (in the Earth radial direction) for k to a vertical vector (−g0k) with the uniform gravity g0 = 9.81 m/s2. The feasibility of such a practice has never been challenged because the horizontal components (gλ, gφ) are much smaller (5–6 orders of magnitudes) than the vertical component gz and the deviation of the magnitude of gz to g0 is also very small. However, similar situation also occurs with the three-dimensional pressure gradient force: the horizontal pressure gradient force is much smaller (5–6 orders of magnitudes) than the vertical pressure gradient force in large-scale oceanic motion. The horizontal pressure gradient forces are considered important in oceanic motion for any scales. Thus, the feasibility to neglect the horizontal gravity components (gλ, gφ) against the vertical gravity (gz) needs to be investigated. The correct approach is to compare the horizontal gravity with the horizontal forces such as the Coriolis force or the horizontal pressure gradient force.

Reference coordinate systems

The polar spherical coordinates (more popular) and oblate spherical coordinates (less popular, see Appendix) are the reference coordinate system used in the Earth science. In all the fields of the Earth science such as meteorology, oceanography, and geodesy, the horizontal component of any vector A is on the spherical surface if the polar spherical coordinates are used or on the ellipsoidal surface if the oblate spherical coordinates are used,

$${\mathbf{A}} = {\mathbf{A}}_{h} + A_{z} {\mathbf{k}}, \, {\mathbf{A}}_{h} = A_{\lambda } {\mathbf{i}} + A_{\varphi } {\mathbf{j}}$$
(1)

no matter the variable is evaluated on the geoid, isobaric, isopycnal, or topographic-following surfaces. Ocean numerical models have several representations of the vertical (i.e., the radial) coordinate such as z-coordinate1,2, isopycnal coordinate3,4, topographic-following coordinate (i.e., sigma-coordinate)5,6. However, the horizontal component of the vector A is always given by (1).

Three forms of the gravity

Three forms of gravity exist in geodesy and oceanography: the real gravity g(λ, φ, z), the normal gravity [−g(φ)k], and the uniform gravity (−g0k, g0 = 9.81 m/s2). The real gravity (g) is a three-dimensional vector field, which is decomposed into

$${\mathbf{g}} = {\mathbf{g}}_{h} + g_{z} {\mathbf{k}}, \, {\mathbf{g}}_{h} = g_{\lambda } {\mathbf{i}} + g_{\varphi } {\mathbf{j}}$$
(2)

where gh is the horizontal gravity component; and (gzk) is the vertical gravity component. The normal gravity vector [−g(φ)k] (vertical vector) is associated with a mathematically modeled Earth (i.e., a rigid and geocentric ellipsoid) called the normal Earth. The normal Earth is a spheroid (i.e., an ellipsoid of revolution), has the same total mass and angular velocity as the Earth, and coincides its minor axis with the mean rotation of the Earth7. Similar to g(λ, φ, z), the normal gravity [−g(φ)k] is the sum of the gravitational and centrifugal accelerations exerted on the water particle by the normal Earth. Its intensity g(φ) is called the normal gravity and determined analytically. For example, the World Geodetic System 1984 uses the Somiglina equation to represent g(φ)8

$$g(\varphi ) = g_{e} \left[ {\frac{{1 + \kappa \sin^{2} \varphi }}{{\sqrt {1 - e^{2} \sin^{2} \varphi } }}} \right], \, e^{2} = \frac{{a^{2} - b^{2} }}{{a^{2} }}{, }\kappa = \frac{{bg_{p} - ag_{e} }}{{ag_{e} }}$$
(3)

where (a, b) are the equatorial and polar semi-axes; a is used for the Earth radius, R = a = 6.3781364 × 106 m; b = 6.3567523 × 106 m; e is the spheroid’s eccentricity; ge = 9.780 m/s2, is the gravity at the equator; and gp = 9.832 m/s2 is the gravity at the poles. The uniform gravity (−g0k) is commonly used in oceanography.

Real and normal gravity potential

Let (P, Q) be the Newtonian gravitational potential of the (real Earth, normal Earth) and PR \(( = \Omega^{2} r^{2} \cos^{2} \varphi /2)\)) be the potential of the Earth’s rotation. Let V = P + PR be the gravity potential of the real Earth (associated with real gravity g) and E = Q + PR be the gravity potential of the normal Earth [associated with the normal gravity -g(φ)k]. The potential of the normal gravity [−g(φ)k] is given by

$$E(\varphi ,z) = - g(\varphi )z$$
(4)

The gravity disturbance is the difference between the real gravity g(λ, φ, z) and the normal gravity [−g(φ)k] at the same point9. The potential of the gravity disturbance (called the disturbing gravity potential) is given by

$$T = V - E = P - Q.$$
(5)

Consequently, the centrifugal effect disappears and the disturbing gravity potential (T) can be considered a harmonic function. With the disturbing gravity potential T, the real gravity g (= gh + gzk) is represented by

$${\mathbf{g}}_{h} = \nabla_{h} T, \, g_{z} = - g(\varphi ) + \frac{\partial T}{{\partial z}}$$
(6)

where \(\nabla_{h}\) is the horizontal vector differential operator. The geoid height relative to the normal Earth (i.e., reference spheroid) is given by Bruns’ formula10

$$N(\lambda ,\varphi ) = \frac{T(\lambda ,\varphi ,0)}{{g_{0} }}$$
(7)

Equations (5), (6), (7) clearly show that the fluctuation of the marine geoid is independent of the Earth rotation and dependent on the disturbing gravity potential (T) evaluated at z = 0 only.

The disturbing static gravity potential (T) outside the Earth masses in the spherical coordinates with the spherical expansion is given by11

$$T(r,\lambda ,\varphi ) = \frac{GM}{r}\sum\limits_{l = 2}^{\infty } {\sum\limits_{m = 0}^{l} {\left( \frac{R}{r} \right)} }^{l} \left[ {\left( {C_{l,m} - C_{l,m}^{el} } \right)\cos m\lambda + S_{l,m} \sin m\lambda } \right]P_{l,m} (\sin \varphi ),$$
(8)

where G = 6.674 × 10−11m3kg−1 s−2, is the gravitational constant; M = 5.9736 × 1024 kg, is the mass of the Earth; r is the radial distance with z = r−R; \(P_{l,m} (\sin \varphi )\) are the Legendre associated functions with (l, m) the degree and order of the harmonic expansion; \((C_{l,m} ,C_{l,m}^{el} ,S_{l,m} )\) are the harmonic geopotential coefficients (Stokes parameters with \(C_{l,m}^{el}\) belonging to the reference ellipsoid.

From Eqs. (4) and (5) the potential of the real gravity is given by

$$V = T - g(\varphi )z.$$
(9)

From Eq. (6) the real gravity is represented by

$${\mathbf{g}}(\lambda ,\varphi ,z) = \nabla_{h} T + \left[ {\frac{\partial T}{{\partial z}} - g(\varphi )} \right]{\mathbf{k}}$$
(10)

The horizontal gravity component at the reference ellipsoid surface (z = 0) is obtained using (7) and (10)12,13

$${\mathbf{g}}_{h} (\lambda ,\varphi ,0) = \nabla_{h} T = g_{0} \nabla_{h} N$$
(11)

An approximate 3D gravity field for oceanography

According to Eq. (8) (i.e., the spectral of the disturbing static gravity potential T), the ratio between T(λ, φ, z) to T(λ, φ, 0) through the water column can be roughly estimated by

$$\left| {\frac{T(\lambda ,\varphi ,z)}{{T(\lambda ,\varphi ,0)}}} \right| \approx \frac{R}{(R + z)} \approx 1,\quad 0 \ge z \ge - H(\lambda ,\varphi )$$
(12)

where H is the water depth. Since R is the radius of the Earth and more than 3 orders of magnitude larger than the water depth H. This leads to the first approximation that the surface disturbing gravity potential T(λ, φ, 0) is used for the whole water column,

$$T(\lambda ,\varphi ,z) \approx T(\lambda ,\varphi ,0),\quad 0 \ge z \ge - H(\lambda ,\varphi )$$
(13)

Since the deviation of the vertical component of the gravity (gz) to a constant (−g0) is 3–4 orders of magnitude smaller than g0, it leads to the second approximation

$$g_{z} \approx - g_{0}$$
(14)

With the two approximations, the near real gravity in the water column is given by

$$g_{x} (\lambda ,\varphi ,z) \approx g_{0} \frac{\partial N}{{\partial x}}, \, g_{y} (\lambda ,\varphi ,z) \approx g_{0} \frac{\partial N}{{\partial y}}, \, g_{z} (\lambda ,\varphi ,z) \approx - g_{0}$$
(15)

Correspondingly, the potential of the real gravity is approximately given by

$$V(\lambda ,\varphi ,z) \approx g_{0} \left[ {N(\lambda ,\varphi ) - z} \right]$$
(16)

where Eq. (9) is used.

Unexpectedly large horizontal gravity component

For simplicity, the local coordinates (x, y, z) are used from now on to replace the polar spherical coordinates with x representing longitude (eastward positive) and y representing latitude (northward positive). The local and spherical coordinate systems are connected by

$$\frac{\partial }{\partial x} = \frac{1}{R\cos \varphi }\frac{\partial }{\partial \lambda }{, }\frac{\partial }{\partial y} = \frac{1}{R}\frac{\partial }{\partial \varphi }, \, \frac{\partial }{\partial z} = \frac{\partial }{\partial r}$$
(17)

The EIGEN-6C4 model14,15, listed on the website http://icgem.gfz-potsdam.de/home, was developed jointly by the GFZ Potsdam and GRGS Toulouse up to degree and order 2190 to produce global static geoid height (N) dataset. Following the instruction, the author ran the EIGEN-6C4 model in 1° × 1° resolution for 17 s to get the global N (Fig. 1) with mean value of 30.57 m, minimum value of -106.20 m, and maximum of 85.83 m. Two locations on the marine geoid are identified with NA =  − 99.76 m at A (80° W, 3° N) in the Indian Ocean, and NB = 65.38 m at B (26° W, 45° N) in the North Atlantic Ocean, i.e., |ΔN|AB = 165.14 m. The big circle distance between A and B is about ΔL = 7920 km. Equation (11) shows that the corresponding |gh| at z = 0 is computed by

$$\left| {{\mathbf{g}}_{h} } \right|_{AB} = g_{0} \frac{{\left| {\Delta N} \right|_{AB} }}{\Delta L} = 9.81{\text{ m/s}}^{2} \times \frac{{165.14{\text{ m}}}}{{7.920 \times 10^{6} {\text{ m}}}} = 20.45{\text{ mGal}}$$
(18)

With the geoid height data obtained from the EIGEN-6C4, N(x, y), the horizontal gravity components gx (Fig. 2a) and gy (Fig. 2b) at z = 0 are computed using Eq. (11). The magnitude of the horizontal gravity vector is calculated by

$$\left| {{\mathbf{g}}_{h} (x,y)} \right| = \sqrt {\left[ {g_{x} (x,y)} \right]^{2} + \left[ {g_{y} (x,y)} \right]^{2} } ,$$
(19)
Figure 1
figure 1

Digital data for EIGEN-6C4 geoid undulation (N) with 1° × 1°, computed online at the website http://icgem.gfz-potsdam.de/home.

Full size image
Figure 2
figure 2

Horizontal gravity components (unit: mGal) at z = 0: (a) longitudinal component (gλ), (b) latitudinal component (gφ), (c) magnitude of the horizontal gravity vector \(\left| {{\mathbf{g}}_{h} } \right|\), and (d) histogram of \(\left| {{\mathbf{g}}_{h} } \right|\) (from the reference16). The source codes for the plots were written by the author ‘s research group using the Matlab Version R2019b (https://www.mathworks.com/products/matlab.html).

Full size image

as shown in Fig. 2c. The histogram of |gh| (Fig. 2d) indicates a positively skewed distribution with a long tail extending to values larger than 100 mGal (1 mGal = 10−5 m s−2). The statistical characteristics of |gh| are 20.84 mGal as the mean, 15.89 mGal as the standard deviation, 3.11 as the skewness, and 21.63 as the kurtosis. The statistical estimate of the mean intensity of the horizontal gravity |gh| (20.84 mGal) is coherent with the simple calculation of |gh|AB between points A and B (20.45 mGal). The two values (20.84 mGal, 20.45 mGal) are unexpectedly large.

C number to identify importance of the horizontal gravity

The importance of the horizontal gravity can be identified by a non-dimensional C number16 from the analysis of horizontal gravity versus the Coriolis force,

$$C(x,y,z) = \frac{{\left| {{\mathbf{g}}_{h} } \right|}}{\left| f \right|U}$$
(20)

where f = 2Ωsinφ, is the Coriolis parameter; and U is the speed of the horizontal current. With Eq. (11) the C number at z = 0 is given by

$$C_{0} (x,y) \equiv C(x,y,0) = \frac{{g_{0} \left| {\Delta N} \right|}}{\left| f \right|U\Delta L}$$
(21)

where ΔL is the horizontal scale of the motion.

The Ocean Surface Current Analysis Real-time (OSCAR) third degree resolution 5-day mean surface current vectors17 on 26 February 2020 (Fig. 3a) was downloaded from the website https://podaac-tools.jpl.nasa.gov/drive/files/allData/oscar/ and the data at the same 1° × 1° grid points as the EIGEN-6C4 data were used. The data represent vertically averaged surface currents over the top 30 m of the upper ocean, which consist of a geostrophic component with a thermal wind adjustment using satellite sea surface height, and temperature and a wind-driven ageostrophic component using satellite surface winds. The histogram of the OSCAR current speed U(x, y) (Fig. 3b) indicates a positively skewed distribution with a long tail extending to values larger than 0.4 m/s. The statistical characteristics of U are 0.1397 m/s as the mean, 0.1414 m/s as the standard deviation, 3.013 as the skewness, and 21.01 as the kurtosis. The histogram of the corresponding Coriolis force \(|f|U(x,y)\) (Fig. 3c) also shows a positively skewed distribution with a long tail extending to values larger than 2.5 mGal. The statistical characteristics of \(|f|U\) are 0.8815 mGal as the mean, 1.029 mGal as the standard deviation, 3.379 as the skewness, and 20.24 as the kurtosis. Comparison between Figs. 2d and 3c leads to the fact that the mean intensity of horizontal gravity component \(|{\mathbf{g}}_{h} |\) (= 20.84 mGal) is nearly 24 times as large as the mean intensity of the Coriolis force identified from the OSCAR surface currents on 26 February 2020. Such unexpectedly large horizontal gravity component is also shown in the world ocean distribution of (1/C0) values (Fig. 4a). The histogram of (1/C0) (Fig. 4b) indicates a positively skewed distribution with a long tail extending to values larger than 0.18. The statistical characteristics of (1/C0) are 0.04238 as the mean, 0.04108 as the standard deviation, 1.447 as the skewness, and 4.481 as the kurtosis. Thus, the global mean of C0 is about 23.6, which is coherent with the rough estimate given above using the geoid height data at the two points A and B (near 24).

Figure 3
figure 3

(a) The world ocean surface current vectors on 26 February 2020 from the ocean surface current analysis real-time (OSCAR) dataset which was downloaded from the website https://podaac-tools.jpl.nasa.gov/drive/files/allData/oscar/, (b) histogram of the current speed U, and (c) histogram of the intensity of the Coriolis force \(\left| f \right|U\). The source codes for the plots were written by the author’s research group using the Matlab Version R2019b (https://www.mathworks.com/products/matlab.html).

Full size image
Figure 4
figure 4

(a) The world ocean surface (z = 0) distribution of (1/C), and (b) histogram of (1/C). The source codes for the plots were written by the author ‘s research group using the Matlab Version R2019b (https://www.mathworks.com/products/matlab.html).

Full size image

New equations with the real gravity

Application of the Newton’s second law of motion into the ocean for the large-scale motions with the Boussinesq approximation leads to

$$\rho_{0} \left[ {\frac{{D{\mathbf{U}}}}{Dt} + 2{{\varvec{\Omega}}} \times {\mathbf{U}}} \right] = - \nabla p + \rho \nabla V + \rho_{0} {\mathbf{F}}$$
(22)

if the pressure gradient force, gravitation, and friction are the only real forces. Here, \({{\varvec{\Omega}}} = \Omega \left( {{\mathbf{j}}\cos \varphi + {\mathbf{k}}\sin \varphi } \right)\), is the Earth rotation vector with Ω = 2π/(86,400 s) the Earth rotation rate; ρ is the density; ρ0 = 1028 kg/m3, is the characteristic density; U = (u, v), is the horizontal velocity vector; \(\nabla\) is the three dimensional vector differential operator; and D/Dt is the total time rate of change; F = (Fx, Fy), is the frictional force and usually represented using vertical eddy viscosity K,

$$F_{x} = \frac{\partial }{\partial z}\left( {K\frac{\partial u}{{\partial z}}} \right), \, F_{y} = \frac{\partial }{\partial z}\left( {K\frac{\partial v}{{\partial z}}} \right)$$
(23)

The continuity equation is given by

$$\nabla _h \cdot {\mathbf{U}} + \frac{\partial w}{{\partial z}} = 0$$
(24)

where w is the vertical velocity. Substitution of (16) into (22) leads to

$$\rho_{0} \left[ {\frac{{D{\mathbf{U}}}}{Dt} + 2{{\varvec{\Omega}}} \times {\mathbf{U}}} \right] = - \nabla p + \rho g_{0} \nabla_{h} N - g_{0} {\mathbf{k}} + \rho_{0} {\mathbf{F}}$$
(25)

Equation (25) can be easily used by any ocean numerical model with just adding the horizontal gravity component represented by \((\rho g_{0} \nabla_{h} N)\).

Hydrostatic balance

Large-scale oceanic motion is hydrostatically balanced,

$$- \frac{\partial p}{{\partial z}} + \rho \frac{\partial V}{{\partial z}} = 0 \, \Rightarrow \, dp = \rho dV$$
(26)

Vertical integration of this equation from the marine geoid (i.e., V = 0) to any equipotential surface V leads to the integral form of the hydrostatic balance

$$p = \int\limits_{ - V(x,y,z)}^{0} {\rho d\tilde{V}} + \rho_{0} g_{0} (S - N)$$
(27)

where S is the sea surface height; and the marine geoid surface (N) is the coincidence of the equipotential and isobaric surfaces (i.e., balance of the 3D pressure gradient force and gravity on N).

Equipotential (-V) coordinate system

The hydrostatic Eq. (27) clearly shows that a single valued monotonic relationship exists between gravitational potential and the depth in each vertical water column. Thus, we may use (-V) as the independent vertical coordinate. The negative sign is due to the vertical component of the gravity is defined positive downward. The total derivative is expanded as

$$\begin{aligned} \frac{D}{Dt} &= \frac{\partial }{\partial t} + \frac{Dx}{{Dt}}\frac{\partial }{\partial x} + \frac{Dy}{{Dt}}\frac{\partial }{\partial y} + \frac{D( - V)}{{Dt}}\frac{\partial }{\partial ( - V)} \\ &= \frac{\partial }{\partial t} + u\frac{\partial }{\partial x} + v\frac{\partial }{\partial y} + \omega \frac{\partial }{\partial V} \\ \end{aligned}$$
(28)

The continuity Eq. (24) becomes

$$\nabla _h\cdot {\mathbf{U}} + \frac{\partial \omega }{{\partial V}} = 0$$
(29)

here,

$$\omega \equiv \frac{dV}{{dt}} = {\mathbf{U}} \cdot \nabla _h V + w\frac{\partial V}{{\partial z}}$$
(30)

where ω is the “vertical velocity” in the V-coordinate. Note that V is the static gravitational potential such that ∂V/∂t = 0.

Dynamic equations in the equipotential coordinate system

The horizontal pressure gradients can be computed from (27),

$$\begin{aligned} \frac{\partial p}{{\partial x}} & = \rho \frac{\partial V}{{\partial x}} + \int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial x}}d\tilde{V} + \rho_{0} g_{0} \frac{\partial (S - N)}{{\partial x}}} , \\ \frac{\partial p}{{\partial y}} & = \rho \frac{\partial V}{{\partial y}} + \int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial y}}d\tilde{V}} + \rho_{0} g_{0} \frac{\partial (S - N)}{{\partial y}} \\ \end{aligned}$$
(31)

Substitution of (31) into (22) leads to the horizontal momentum equations

$$\frac{Du}{{Dt}} - fv = - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial x}}d\tilde{V}} - g_{0} \frac{\partial (S - N)}{{\partial x}} + F_{x}$$
(32a)
$$\frac{Dv}{{Dt}} + fu = - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial y}}d\tilde{V}} - g_{0} \frac{\partial (S - N)}{{\partial y}} + F_{y}$$
(32b)

Extended geostrophic equilibrium and thermal wind relation

For steady state (no total derivative) without friction, Eqs. (32a) and (32b) become the extended equations for the geostrophic currents

$$- fv_{G} = - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial x}}d\tilde{V}} - g_{0} \frac{\partial (S - N)}{{\partial x}}$$
(33a)
$$fu_{G} = - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{\partial \rho }{{\partial y}}d\tilde{V}} - g_{0} \frac{\partial (S - N)}{{\partial y}}$$
(33b)

Vertical derivative of (33a) and (33b) leads to the extended thermal wind relation

$$- f\frac{{\partial v_{G} }}{\partial z} = \frac{{g_{0} }}{{\rho_{0} }}\frac{\partial \rho }{{\partial x}} - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{{\partial^{2} \rho }}{\partial x\partial z}d\tilde{V}}$$
(34a)
$$f\frac{{\partial u_{G} }}{\partial z} = \frac{{g_{0} }}{{\rho_{0} }}\frac{\partial \rho }{{\partial y}} - \frac{1}{{\rho_{0} }}\int\limits_{ - V}^{0} {\frac{{\partial^{2} \rho }}{\partial y\partial z}d\tilde{V}}$$
(34b)

where the vertical differentiation of lower limit (-V) of the integrals of the righthand side of (33a) and (33b)

$$\frac{\partial V}{{\partial z}} = g_{z} \approx - g_{0}$$
(35)

is used.

Vorticity equation

Subtraction of the differentiation of the longitudinal component of Eq. (25) with respect to y from the differentiation of the latitudinal component of Eq. (25) with respect to x leads to the vorticity equation,

$$\begin{aligned} \frac{\partial \zeta }{{\partial t}} & = - {\mathbf{U}} \cdot \nabla _h\zeta - \omega \frac{\partial \zeta }{{\partial V}} + \beta v - (\zeta + f)\nabla _h \cdot {\mathbf{U}} + {\mathbf{k}} \cdot \left( {\frac{{\partial {\mathbf{U}}}}{\partial V} \times \nabla_h \omega } \right) \\ &\quad + \frac{{g_{0} }}{{\rho_{0} }}J(\rho ,N) + \left( {\frac{{\partial F_{y} }}{\partial x} - \frac{{\partial F_{x} }}{\partial y}} \right) \\ \end{aligned}$$
(36)

where \(J(\rho ,N) = (\partial \rho /\partial x)(\partial N/\partial y) - (\partial \rho /\partial y)(\partial N/\partial x)\), is the Jacobian; \(\beta = df/dy\) is the latitudinal change of the Coriolis parameter; and \(\zeta = \partial v/\partial x - \partial u/\partial y\) is the vertical vorticity.

Conclusion

The non-dimensional C number is used to identify relative importance of the horizontal gravity and the Coriolis force using the geoid height data (N) provided by the EIGEN-6C4 gravity model, and the Ocean Surface Current Analysis Real-time (OSCAR) surface current vectors on 26 February 2020. Unexpectedly large value of the C number (global mean around 24) may surprise both oceanographic and geodetic communities. It is very hard for my oceanographic colleagues to accept such strong horizontal gravity (at z = 0), which is an order of magnitude lager that the Coriolis force. Thus, in situ measurement of gravity may be needed for oceanography in addition to the routine hydrographic and current meter measurements.

A geodesist may also be surprised that the horizontal gravity (z = 0) associated with the geoid height (N) varying between -106.20 m to 85.83 m (well accepted by the geodetic community), which was produced by a community gravity model (EIGEN-64C), generates the ocean currents with the intensity nearly 24 times as large as the currents identified from the ocean surface current analysis real-time (OSCAR) (oceanographic community product).

How to resolve such incoherency between the two communities on this issue becomes urgent. The new ocean dynamic equations including the horizontal gravity may provide a theoretical framework to resolve the incoherency since the potential of the real gravity (V) obtained from a geodetic gravity model is explicitly in the dynamical equations. Besides, use of the real gravity in the ocean dynamics may ultimately resolve some fundamental problems in oceanography such as reference level, and absolute geostrophic current calculation. A new dynamic system for large-scale oceanic motion with the real gravity is presented such as hydrostatic balance, geostrophic equilibrium, thermal wind, equipotential coordinate system, and the vorticity equation. Close collaboration between the oceanographic and geodetic communities helps the use of the real gravity in oceanography and the verification of the gravity model in geodesy with oceanographic data.