Retraction of: Scientific Reports https://doi.org/10.1038/s41598-020-58372-1, published online 30 January 2020
The authors are retracting this Article.
After the publication of this Article it was brought to the authors’ attention that the results obtained for boron nitride are incorrect. Subsequently, the authors identified an error in Table 1, row 2, where the number of edges for (2,3) is incorrectly defined as 8(n-2). The correct formula is 8(n-1). As a result of this error, the results and conclusions reported for boron nitride are invalid.
All authors agree with the retraction.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yousaf, A., Alolaiyan, H., Nadeem, M. et al. Retraction Note: Topological analysis of carbon and boron nitride nanotubes. Sci Rep 10, 9995 (2020). https://doi.org/10.1038/s41598-020-67084-5
Published:
DOI: https://doi.org/10.1038/s41598-020-67084-5
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
