Measuring light scattering and absorption in corals with Inverse Spectroscopic Optical Coherence Tomography (ISOCT): a new tool for non-invasive monitoring

An Author Correction to this article was published on 27 November 2019

This article has been updated


The success of reef-building corals for >200 million years has been dependent on the mutualistic interaction between the coral host and its photosynthetic endosymbiont dinoflagellates (family Symbiodiniaceae) that supply the coral host with nutrients and energy for growth and calcification. While multiple light scattering in coral tissue and skeleton significantly enhance the light microenvironment for Symbiodiniaceae, the mechanisms of light propagation in tissue and skeleton remain largely unknown due to a lack of technologies to measure the intrinsic optical properties of both compartments in live corals. Here we introduce ISOCT (inverse spectroscopic optical coherence tomography), a non-invasive approach to measure optical properties and three-dimensional morphology of living corals at micron- and nano-length scales, respectively, which are involved in the control of light propagation. ISOCT enables measurements of optical properties in the visible range and thus allows for characterization of the density of light harvesting pigments in coral. We used ISOCT to characterize the optical scattering coefficient (μs) of the coral skeleton and chlorophyll a concentration of live coral tissue. ISOCT further characterized the overall micro- and nano-morphology of live tissue by measuring differences in the sub-micron spatial mass density distribution (D) that vary throughout the tissue and skeleton and give rise to light scattering, and this enabled estimates of the spatial directionality of light scattering, i.e., the anisotropy coefficient, g. Thus, ISOCT enables imaging of coral nanoscale structures and allows for quantifying light scattering and pigment absorption in live corals. ISOCT could thus be developed into an important tool for rapid, non-invasive monitoring of coral health, growth and photophysiology with unprecedented spatial resolution.


Reef-building corals provide critical habitat for as many as 1.3 million species1, which in turn directly support the lives of more than 500 million people2. The establishment, succession and maintenance of such coral reef ecosystems rely on a mutualistic endosymbiosis between a calcifying cnidarian animal and photosynthetic dinoflagellates of the family Symbiodiniaceae, which live within the coral tissue and provide the host with most of its energy demand through excretion of photosynthetically-fixed carbon3. Reef-building corals consist of thin tissue that deposits and covers a calcium carbonate skeleton, and such a configuration has evolved a variety of strategies to increase light availability to Symbiodiniaceae for greater photosynthate output, while minimizing light stress, which can typically occur in shallow waters especially when associated with high temperature4,5. Anomalously high temperatures and irradiances can impair photosynthetic efficiency leading to photodamage and production of reactive oxygen species (ROS), which may lead to the expulsion of the symbionts (coral bleaching) and result in death of the colony5,6,7,8,9. The trajectory of climate change is increasing the frequency and severity of coral bleaching events creating an urgent need to understand the mechanisms of light collection in corals2,10,11.

Different strategies to maximize light availability to Symbiodiniaceae have been described. Downwelling light that is not absorbed by the symbionts in the first pass can be scattered back into the tissue by the calcium carbonate skeleton and thus increase the light availability12,13,14,15,16,17. Within tissue, light scattering together with dynamic light redistribution due to tissue contraction and expansion can significantly increase light availability to symbionts18,19,20. Light-scattering or absorption by fluorescent host pigments can further modulate the light microenvironment of the Symbiodiniaceae, while also filtering out damaging short-wavelength radiation8,21,22,23 and affecting radiative heating of the coral tissue24,25. Corals can also actively regulate symbiont cell densities and thereby adjust microalgal self-shading within their tissues26.

Coral photophysiology is strongly affected by the light transport and absorption properties of coral tissue components and skeleton18,19,20. In coral tissue and skeleton, downwelling light undergoes both scattering and absorption, where spatial variations in refractive index lead to light scattering19,27,28,29. In tissue, refractive index variations are primarily due to intracellular structures, ranging from macromolecular complexes to organelles, and intercellular boundaries30. In the skeleton, light scattering is affected by variations in density of structures ranging from tens of nanometers in size (e.g., calcium carbonate nanograins, orientation and subsequent birefringence of the constitutive skeletal nanograins, organic matrix-skeleton boundaries) to micrometers (septa, corallites)13,15,31. The overall organization of these structures which are assembled hierarchically as a fractal15,32,33, can be characterized by their spatial autocorrelation function Bn(r), with its functional shape parameterized by D, a fractal dimension27,34. Measuring D from the skeletons of 88 coral species revealed their overall skeletal organization to be a ‘mass-fractal’ structure (i.e., average D < 3), which correlated with their growth rates, light-scattering properties and bleaching susceptibility31. This emerging picture suggests that corals that grow at faster rates are more likely to have lower skeletal fractal-dimensions, denser skeletons, lower light-scattering properties, and higher bleaching susceptibility13,15,31,32,33. Coral tissue and skeleton differ in their respective absorption properties. Photosynthetic pigments within Symbiodiniaceae are the dominant light absorbers in tissue, where absorption spectra exhibit characteristic peaks corresponding to symbiont pigment composition18,22,29,35,36. Coral skeletons, on the other hand, are weakly absorbing with light transport dominated by scattering processes13,14,15,37.

Coral physiology and susceptibility to bleaching critically depend on light transport and absorption in tissues and skeleton. However, these processes are not fully understood, and many key questions remain open. For example, there is currently no consensus regarding whether light transport predominates in tissue or skeleton (e.g., due to a higher scattering coefficient) with opposing hypotheses being proposed13,14,37. In addition, it is not clear how spatially heterogeneous the scattering properties are across a coral. Mass fractal properties of coral skeletons are directly related to the physiology of skeletal deposition, as D of a coral skeleton is an end result of the balance between the rate of skeletal linear growth and the rate of mineral deposition, with both rates inherently linked with coral photophysiology and the chemical properties of the environment such as water acidity and temperature31,38. Understanding the mechanisms of light amplification in coral skeletons and tissue is crucial for coral photobiology and depends on the ability to model light transport, with either stochastic methods such as Monte Carlo, or deterministic solutions of Maxwell’s equations such as the pseudo-spectral time-domain (PSTD) method. Models, in turn, require an input of the accurate three-dimensional distributions of the scattering and absorption properties of coral skeletons and tissue, which are currently poorly understood due to the lack of techniques able to provide these measurements in live corals. Finally, the concentration of symbionts and pigments in coral tissue is critical in nearly every aspect of coral physiology, bleaching, and disease. Currently there is no non-destructive technique that is able to fully assess coral pigments in live corals. An ideal technology would allow non-invasive, real-time 3-D imaging of the key optical (absorption and scattering) and architectural (mass-fractal dimension D) properties in tissue and skeleton of live coral specimens.

Here we apply a variant of optical coherence tomography (OCT) to the study of coral optical properties. OCT is a non-invasive 3-D optical imaging technique that uses focused light typically in the near-infrared to probe and collect cross-sectional images from a sample that scatters light. First introduced in 1991, OCT has found widespread use in ophthalmology for clinical retinal imaging and a wide array of other biomedical applications including cardiology and dentistry39,40. OCT is a label-free technique that requires no sample preparation, relying on intrinsic differences in optical backscattering intensity within a sample to provide contrast. The transverse resolution is provided by scanning a focused beam across a sample and is determined by the numerical aperture of the focusing objective. The axial resolution is dependent on the center wavelength and bandwidth of illumination, and axial spatial resolution on the order of one micron can be achieved41. The depth of penetration depends on the scattering and absorption properties of the imaged object and in most biological tissues ranges from a few hundred microns to a millimeter. Recently, OCT has been used to image tissue and skeletons of live corals, providing complete 3-D structural images of tissue, skeleton, and chromatophore distribution not previously obtainable in a living coral17. In addition, the rapid imaging capability of OCT enabled live microscale study of coral polyp movement in response to high light illumination17.

While OCT holds a significant potential for coral imaging, its capabilities can be significantly enhanced to enable a comprehensive and quantitative imaging of coral optical properties. For a given resolution voxel, traditional OCT image intensity is proportional to the amount of backscattered light, making it impossible to decouple the effects of absorption and scattering, which would be required to measure pigment concentration and composition and the scattering properties of coral tissue42. Current techniques used to quantify pigment concentration in corals are all invasive and require the isolation of algal cells from the tissue, followed by pigment extraction with an organic solvent43. Pigment density is then normalized against an estimation of surface area from which the tissue was extracted. However, this approach is very time consuming and additionally prone to errors due to the architectural complexity of coral surfaces44. To quantify pigment density non-invasively, a complete characterization of coral optical properties is required. This involves the scattering coefficient, μs, which quantifies the total amount of light scattered in all directions, the angular distribution of scattered light, p(θ), also known as the phase function, and the absorption coefficient, μa. Another metric frequently employed in characterizing light transport properties of corals is the reduced scattering coefficient, \({\mu {\rm{^{\prime} }}}_{s}={\mu }_{s}(1-g)\), where the anisotropy factor (g) is equal to the average cosine of the phase function p(θ) and \({\mu {\rm{^{\prime} }}}_{s}\)represents the inverse of the transport mean free path, the distance at which the trajectory of a photon in a medium becomes random.

Approaches to decouple these parameters included an OCT modality that, in addition to the backscattering coefficient, μb, calculates the attenuation of the OCT signal in the longitudinal direction45. The latter is proportional to μa + μs, integrated over the bandwidth and over several resolution voxels (typically ~50–100 μm). The phase function is then assumed to have a specific Henyey-Greenstein form, which was first developed to describe light scattering by interstellar dust and was later adopted to biomedical optics applications, and is parameterized by the single parameter g46. This links coefficients μs and μb and allows estimation of μs and g. This model assumes absorption is negligible, so it cannot be measured under this approximation. Furthermore, this functional form is only applicable in the very limiting case of a refractive index correlation function Bn(r) with D = 3, which is not appropriate for coral light scattering since skeletal organization shows on average D < 315.

Here we adopt a recently developed extension of OCT, inverse spectroscopic OCT (ISOCT), to obtain a comprehensive characterization of tissue and skeletal scattering, absorption, and architectural properties, which is independent of Henyey-Greenstein functional formalism and thus allows for evaluation of scattering properties rising from mass-fractal structures with D = <3 and D > 3. ISOCT measures the optical spectra of the OCT signal for any given 3-D voxel returning a 4-D data cube as a function of the voxel coordinates x, y, z, and wavelength λ47,48,49,50. In previous studies, ISOCT was used to measure D in mammalian tissues and cell culture models, showing that D is uniquely sensitive to the statistical structure of a medium in the length-scale domain from 30–450 nm50. These studies established the sensitivity of D to ultrastructural remodeling associated with biological processes such as condensation of chromatin in the cell nucleus, cytoskeletal remodeling, and crosslinking modification of the collagenous extracellular matrix, while assuming negligible optical absorption in these samples47,49,51. For the application of ISOCT on corals in the present study, the absorption spectra of prevalent pigments were measured a priori. We reasoned that because the narrow-band absorption spectra of pigments are drastically different from the broad-band, slowly varying spectra of backscattered light, μs(λ), the pigment concentration and composition could be extracted from μs(λ) + μa(λ). Then μs(λ) and μa(λ) can be decoupled. Because the spectrum of μb(λ) is functionally related to p(θ) through a Fourier transform, the combination of μs and μb can be used to extract p(θ) without making an approximation that p(θ) can be completely characterized by a single parameter \(g\). In turn, the scattering properties can be used to estimate subdiffractional structural properties of the tissue and the skeleton, which provide further information on the growth pattern of a coral. In the present study, we use ISOCT to image the concentration and composition of tissue pigments, the scattering coefficient and the angular distribution of scattered light of both the tissue and the skeleton in vivo. These measures fully characterize light interaction and transport within a coral.

Materials and Methods

Inverse spectroscopic optical coherence tomography (ISOCT) instrument

The instrument used for ISOCT imaging has been described elsewhere48,52. For these studies, a visible (520–720 nm) spectral domain OCT system was used with a home-built spectrometer. The spectrometer camera frame rate was 45,000 frames per second, allowing for collection of a 512 × 512 pixel lateral scan in 5.8 seconds. Laser power at the sample did not exceed 10 mW during imaging, which in combination with the short scan time limited light exposure and potential phototoxicity to the coral. The visible spectrometer utilized a 4,096 pixel line-scan camera to obtain the spectrum of the OCT interferogram at each acquisition location across the sample. The spectral resolution of the spectrometer provided an axial imaging range of ~1.5 mm, allowing for sufficient imaging depth in the spatial domain to image through weakly scattering coral tissue in the visible band. A detailed description of methods for OCT spatial resolution measurement is included in Supplementary Material. The lateral resolution was calculated to be 8.8 μm, with full imaging axial resolution measured to be 1.22 μm in air (Supplementary Fig. 1B). For the spectrally-resolved OCT imaging required in ISOCT signal analysis, the axial imaging resolution was measured to be 7.88 μm, as previously reported52.

Live coral imaging

Live specimens of the reef-building corals Diploastrea heliopora and Merulina ampliata were obtained from the aquarium trade and from the Shedd Aquarium, Chicago, IL who approved the coral species used in this study for research by their institutional review board, i.e., no endangered or threatened species as listed by the US Endangered Species was used in this study. Corals were kept in a saltwater tank (JBJ Nano Cube 28 gallon) with two Acela pumps rated at 1000 L per hour and a 105 W quad compact fluorescent lamp (10,000 K, 3.75 W/gallon), maintained at a temperature of 26.5 ± 0.5 °C. ISOCT images were acquired by placing the coral in a shallow dish, removing the majority of water covering the coral tissue and immediately scanning the focused sample laser beam over the region of interest, a process that lasted less than 10 seconds.

To determine the location of the skeleton in the OCT images, a preliminary scan of a selected region of coenosarc tissue was acquired. Then, while covering the OCT objective, a Waterpik system was used to wash away all of the coral tissue within the previously scanned region. Care was taken to prevent the coral frag from moving during this process, and a follow-up scan of the same region with the same instrument settings was acquired. For both scans, water covering the sample was kept to a minimal depth ~1 mm to ensure accurate vertical colocalization between the scans before and after tissue removal.

Light scattering model for ISOCT signal analysis

Light propagation through a turbid medium, including a biological tissue, is fully determined by the spatial distribution of the complex optical refractive index n(x, y, z, λ)27,53. Spatial variations in the absolute value of refractive index give rise to light scattering, while the imaginary part gives rise to light absorption. The respective fundamental optical properties are the differential scattering cross section function σs(θ, λ, x, y, x) [cm2], which describes the amplitude of light scattering as a function of scattering angle θ, and the absorption coefficient μa(x, y, z, λ) [cm−1], described as the probability of light absorption per infinitesimal path length. Under the first-order Born approximation, which generally describes a medium with relatively weak scattering potential and is broadly applicable to most biological tissues, σs is related to the autocorrelation function of n(x, y, z) via a Fourier transform54. For a given (x, y, z) position within a turbid medium, scattering properties are described via the scattering coefficient, μs [cm−1], which is the integral of σs per unit volume over all directions, and the angular (phase) function of scattering p(θ)55. Other properties, such as the backscattering coefficient µb, which describes the likelihood of an incident photon scattering in the direction of origin, can also be derived from σs. The ISOCT signal is scaled by µb, and in order to relate the ISOCT signal to the optical properties of the medium, we model the autocorrelation of the refractive index distribution Bn using the three-parameter Whittle-Matérn model,


where r is the spatial separation between any two points, An is proportional to the variance of the refractive index σn, Ln represents a correlation distance, D describes the shape of the correlation function, and Kx() denotes the modified Bessel function of the second kind27. Because the exact form of Bn cannot be known a priori and may vary not only across different types of biological tissue but even within the same tissue type, an advantage of this model is its versatility. Parameterized by D, the majority of the realistic functional forms of the autocorrelation function are well represented by the model and can be ascertained experimentally, thus eliminating the need to assume a specific form a priori. For D < 3, the autocorrelation function has an inverse power-law form typical of a fractal tissue organization with the fractal dimension D. For 3 < D < 4, the autocorrelation function is a stretched exponential function. It is an exponential function with attenuation length Ln for D = 4 and a Gaussian for D approaching infinity. Physically, D is a fractal dimension, characterizing the degree of self-similarity of structures at different length scales, and can alternatively be thought to characterize the degree of clumpiness in a continuous random medium. Enhanced backscattering spectroscopy measurement of D from various hard and soft scattering structures is reported in Figure 6 from a prior publication15, with mean D values from samples ranging from ~2 for to >3. Earlier techniques attempting to measure μs and g frequently relied on the approximation of p(θ) as the Henyey-Greenstein function, which corresponds to a special case of the Whittle-Matérn model for D = 314,37,55,56. However, the shape of p(θ) varies considerably with changes in D, as can be appreciated from Supplementary Fig. 2(A) which shows an example of p(θ) behavior for D ranging from 1 to 5. Scattering behavior is also strongly influenced by changes in both D and g, as can be observed in Supplementary Fig. 2(B) which shows the behavior of μs as a function of D and g.

Applied to the imaging of coral tissue, ISOCT measures the optical backscattering intensity, Ib(λ, x, y, z), the square of which is proportional to the product of μb(λ, x, y, z) of the sample and the attenuation term integrated over the depth above the voxel of interest, which depends on the sum of the scattering and absorption coefficients of the medium, μt = μs(λ) + μa(λ), for a given voxel. These relative contributions of scattering and absorption were fit using a MatLab code implementing the Nelder-Mead algorithm57 to iteratively minimize the sum of square differences as mathematically described by the following cost function:

$$cost({c}_{a},\,{c}_{s},\,D,\,{L}_{n})=\,\mathop{\sum }\limits_{{\lambda }_{i=1}}^{{\lambda }_{i=N}}\,{|{\mu }_{t}^{\ast }({\lambda }_{i})-f({c}_{a},{c}_{s},D,{L}_{n},{\lambda }_{i})|}^{2}$$

where \(f({c}_{a},\,\,{c}_{s},\,D,\,{L}_{n})=\,{c}_{a}\,{\mu }_{a}^{\ast }({\lambda }_{i})+{c}_{s}\,{\mu }_{s}^{\ast }({\lambda }_{i},\,D,\,{L}_{n})\); \(\,{c}_{a},\,{c}_{s}\,\in [0,\,\frac{1}{2}]\). For simplicity, we introduce * to denote where a metric was normalized by its maximum along wavelength. Thus, the absolute coefficients are defined as:

$${\mu }_{a}(\lambda )={c}_{a}\,{\mu }_{a}^{\ast }(\lambda )\,{\rm{\max }}\,\{{\mu }_{t}({\lambda }_{i})\}$$
$${\mu }_{s}(\lambda )={c}_{s}\,{\mu }_{s}^{\ast }(\lambda ,\,D,\,{L}_{n})max\,\{{\mu }_{t}({\lambda }_{i})\}$$

Using Eq. (2), the effect of absorption is estimated from the attenuation coefficient spectrum based on the characteristic absorption spectrum that is distinct from the scattering spectrum, which decouples μs(λ) and μa(λ). (see ‘ISOCT analysis’ section in Results for details on the estimated absorption spectra). The next step is to determine D within a given resolution voxel (approximately 9 × 9 × 1.2 μm) of the sample by fitting µb(λ) using the Whittle-Matérn model: µb(λ)\(\,\propto \,{\lambda }^{\frac{D}{2}-2}\)48. As a result, ISOCT measures the set of three parameters (optical parameters μs and μb and the ultrastructural parameter D) in 3D. The Whittle-Matérn model is then used to calculate g and \({\mu }_{s}\text{'}\) using equation (6) from a previous publication27. Furthermore, one can fully characterize all three ultrastructural parameters (An, Ln, D from Eq. 1) from the measured optical properties (μs, μb) for a more thorough characterization of the structure of the medium27. The analysis of ISOCT in coral skeletons is performed with the same algorithm; however, in coral skeletons, as opposed to coral tissue, μs(λ) μa(λ)15 and skeletal light absorption is ignored.

ISOCT signal analysis

A full description of the steps for processing ISOCT data is given in Results, along with a processing flowchart in Fig. 1. Briefly, the spectral domain OCT data collected at wavelengths between 520 and 720 nm were converted to spectrally-dependent OCT images through a short-time Fourier transform (STFT) with 22 separate Gaussian windows, each with full width at half-maximum (FWHM) of 20 nm. System spectral response was accounted for by calibration with scans of a reference solution of 80 nm polystyrene beads in water, approximating a medium with Rayleigh scattering behavior. Next, surfaces of either coral tissue or skeleton were detected with either an edge detection algorithm or manual segmentation. The surface edge detection algorithm was implemented through a custom MatLab script and operated on each OCT B-scan in the image cube by first filtering and adjusting intensity values to optimize image contrast. Then, an extended-maxima transform was applied to binarize the image, delineating the B-scan region containing scattering sample. Binary morphological operations then detected the top surface of this sample region, which when combined with all B-scans provided a 2-D sample surface profile image for the 3-D OCT scan. The signal intensity decay as a function of depth below the detected edge was fit with an exponential function over a 90 μm depth to quantify the total attenuation coefficient, μt, for each OCT A-line for each wavelength. This method for measuring μt was verified by applying it to samples of polystyrene spheres with known magnitude of μt across a μt range relevant for tissue (see details of validation analysis in Supplementary Fig. 3 and Supplementary Material). The full spectrum of μt was then decomposed into a linear combination of scattering and absorption coefficients assuming an absorption dominated by chlorophyll a (see ISOCT analysis section in results regarding how the shape of μt spectra showed a characteristic peak of chlorophyll a absorption, which was the predominant peak for the corals measured). The true backscattering spectrum from each voxel was measured by dividing the OCT spectrum by the spectrally-dependent μt attenuation term above the voxel. This corrected spectrum was then fit to the power-law relation with wavelength shown above to determine D.

Figure 1

Flowchart for ISOCT data processing. Processing starts with the acquisition of the OCT volume and detection of surfaces of tissue and skeleton. From a short-time Fourier transform, the spectral cube is generated and wavelength-dependent backscattering and attenuation coefficients are computed. Fractal dimension D is fit from μb, and the μs spectral shape and scaling factors for μa and μs are also fit from the spectrum of μt. Finally, the wavelength-dependent (g) is computed from the albedo (α) and D.

For calculation of chlorophyll a density, the linearly decomposed spectrum of μt, consisting of the respective fractional contributions of μs and μa was taken with the full spectral shape of μa assumed to be that of chlorophyll a in methanol. This absorption spectrum was taken from values collected by J. Li and provided on the Oregon Medical Laser Center webpage58, and shows a characteristic peak in the visible around 660 nm. The spectroscopic resampling of OCT data was performed with STFT window FWHM of 20 nm, meaning that absorption peaks from other pigments that fall outside this width from the peak at 660 nm would have negligible contribution to the linear regression used to compute μa contribution and would not contribute to the calculation of chlorophyll a concentration. Chlorophyll a concentration was then calculated by dividing the measured absorption coefficient by the molar extinction coefficient provided, scaled by the peak intensity at 660 nm. This molar concentration was converted to areal density [mg cm−2] by molar conversion of chlorophyll a and integrating the volumetric concentration over the 90 μm thickness of tissue used for μt measurement.


ISOCT analysis

Here we describe a novel OCT data processing method employed to extract structural and optical properties from OCT data (Fig. 1). A short-time Fourier Transform was applied to the raw OCT data using Gaussian windows (FWHM of 20 nm) to compute a spectral cube consisting of OCT intensity as a function of 3-D position and wavelength. This data cube is collected by raster scanning the OCT sample laser beam across the sample surface, collecting an OCT A-line, or the backscatter intensity function versus depth, from each transverse position. The series of A-lines from a single scan across the sample form an OCT B-scan image, which displays a depth-slice of backscattering intensity from the sample in question. From OCT B-scan images the surface of the coral tissue and skeleton were detected, and the wavelength dependent attenuation coefficient, μt, was computed from the spectral cube by fitting an exponential fit in depth at a fixed thickness of 90 μm below each surface for every lateral position according to the Beer-Lambert law. This thickness was selected in order to provide sufficient depth information within the constraints of axial resolution of the spectrally resolved OCT images and optical penetration through the coral tissue and skeleton under study. This technique for calculating μt was validated for by measuring standard aqueous suspensions of 200 nm polystyrene spheres with known μt from Mie theory (see Supporting Methods and Supplementary Fig. 3). The backscattering coefficient μb was calculated for the tissue by averaging signal intensity from the first 90 μm of tissue from the surface. Using the thickness of the tissue layer and calculated attenuation coefficient, the decaying signal intensity in the cube was compensated by the spectrally dependent attenuation in order to yield an accurate backscattering spectral shape. From this modified spectral cube, the backscattering coefficient of the skeleton was computed by averaging the upper 90 μm of the skeletal layer.

Next, from the backscattering coefficient of the tissue and skeleton, the first-order Born approximation was employed, reducing the spectral dependence to a simple power law fit with fractal dimension D (Fig. 1C). D was fit for every lateral position of the tissue and skeleton where the surface edge was available from an extended-maxima transform based algorithm for the tissue surface or manual segmentation for the skeleton surface, specular reflection was absent, and topography was within the roll-off sensitivity range of the OCT instrument, which is due primarily to spectral resolution of the spectrometer and is on the order of −10 dB mm−1 in air for the visible spectrometer used in this study.

From μt(λ) of the tissue layer and the skeleton layer, the μs spectral shape was fit by assuming that the Whittle-Matérn functional form can parameterize the statistics of the local refractive index variations using three structurally relevant parameters, σn, D, and Ln27, see methods. Additionally, we observed that the shape of μt spectra showed a characteristic peak of chlorophyll a absorption. For the corals measured, this was the predominant absorption feature observed and so for this model, the predominant absorbing pigment of chlorophyll a was assumed to be responsible for all absorption within the coral tissue. Using this assumption, the relative contributions of μa and μs to the total μt spectrum were fit using the Nelder-Mead algorithm described in “Light scattering model for ISOCT signal analysis” in Materials and methods in order to minimize the cost function of deviation from the experimentally measured total attenuation spectrum. To scale measured μb intensity, a standard sample of 80 nm polystyrene sphere suspension with known scattering properties was measured for calibration. Finally, the ratio of μb to μs, known as the reflection albedo α, is related to the structural parameters D and g within the Born approximation and is described in a prior publication27. Using this relationship, a lookup table was computed to determine g for given α and D.

Mapping structural and optical properties and chlorophyll a surface density measurement

To measure structural and optical properties from the tissue and skeleton of live corals, we scanned specific regions on specimen fragments of Merulina ampliata and Diploastrea heliopora with our visible OCT system. The 3-D nature and micron-scale resolution of visible OCT imaging can be appreciated in Supplementary Video 1, which shows a flythrough of OCT B-scans of a Diploastrea heliopora polyp mouth. The spectrally enabled ability of ISOCT to quantify tissue structure through its fractal dimension D is also demonstrated in Fig. 2 (see Supplementary Video 2 for a rendered scan volume of the coenosarc region of Merulina ampliata). In this rendering, the traditional OCT intensity is depicted as a grayscale image and D values are represented by color hue. It is apparent that in coral tissue, D has a heterogeneous spatial distribution with certain tissue regions showing D as low as 1.5 while others show D values as high as 5. Furthermore, it is seen that for many regions in the tissue, D does not reflect a value sufficiently close to 3 to make the assumption of a Henyey-Greenstein scattering phase function appropriate.

Figure 2

Example rendering of ISOCT data from Merulina ampliata. Photograph of live coral measured shown on left, with box demarcating region scanned. 3-D volumetric rendering of OCT scan volume shown on right, with traditional OCT image intensity shown in grayscale with 3-D overlay of local D value in color. Rendering box is 2.56 × 2.56 × 1.5 mm.

Linking the ultrastructural characteristics and corresponding optical properties of corals is fundamental for mechanistic understanding of light transport in these ecologically important organisms. ISOCT provides an unparalleled method for mapping the spatial distribution of these properties with high spatial resolution. Maps of some of these properties, namely the total attenuation coefficient μt, areal density of chlorophyll a, which is directly related to μa, and D from representative regions of coenosarc tissue in Merulina ampliata and Diploastrea heliopora are shown in Fig. 3. An example projection map of scattering anisotropy, g, calculated from the measured scattering albedo and D, is shown in Supplementary Fig. 4. Accompanying histograms of calculated g distributions from tissue and skeleton of Merulina ampliata and Diploastrea heliopora show that both compartments have g close to 1 indicating high forward scattering from these structures.

Figure 3

Top-down projection maps of optical and structural properties. Photographs of Merulina ampliata (A1) and Diploastrea heliopora (A2) with box demarcating region scanned with ISOCT. En face projection maps of total attenuation coefficient μt (B1,B2), chlorophyll a concentration (C1,C2), and D value (D1,D2) for Merulina and Diploastrea, respectively. Maps (B1,C1,D1) are 2.56 × 2.56 mm; maps (B2,C2,D2) are 1.85 × 1.85 mm.

While the penetration of visible OCT is somewhat limited through the highly absorbing and scattering tissues of many corals, variability in tissue thickness and skeletal topography allows for imaging directly through living tissue and quantifying optical and structural properties from certain areas of the coral coenosteum, i.e., the skeletal material formed below the connective tissue between polyps. To confirm the location of the skeleton in these regions, we captured OCT scans from a specific region of coenosarc in Diploastrea heliopora before and after tissue removal (see peaks of skeletal plates easily resolved through tissue in Supplementary Video 3). Maps of total attenuation coefficient μt, chlorophyll a concentration, and D of Merulina ampliata and Diploastrea heliopora skeletons are shown in Supplementary Fig. 5. Chlorophyll a areal density was determined by ISOCT for the first 90 µm of tissue thickness for surface areas over skeletal ridges and valleys (Fig. 3C1 and C2, respectively, see inset in Fig. 3A1 and A2). While considerable spatial variability was observed across skeletal ridges and valleys (from 0.05–0.1 mg cm−2), the average chlorophyll a density was 29.5 ± 14.4 µg cm−2 for Merulina ampliata and 17.9 ± 15.8 µg cm−2 for Diploastrea heliopora.

Spatial variability of all three of these properties in the projected view is apparent and of consequence when modeling light transport within the whole colony. A large variability in the structural parameter D was observed for the tissue and skeletal compartments of Merulina ampliata and Diploastrea heliopora (Fig. 4). Measured spatial variance can be considered as the sum of true spatial variance and instrumental variance. Instrument variance can be assessed when measuring the spatial variability of a truly homogenous sample. To determine instrument variance, we measured an aqueous suspension of 80 nm polystyrene beads at a concentration of 2 wt%, a medium reasonably homogenous considering each OCT resolution voxel contains on the order of 104 particles. We applied the same ISOCT analysis algorithm to a scan of these beads as was applied to the data acquired from coral tissues, and used a randomized square averaging box to randomly sample D values at various locations on a projected D map. By plotting the standard deviation of D values from this random sampling with respect to the edge length of the averaging box, the degree of spatial variance is expressed (Supplementary Fig. 6). Results from an example scan of Merulina tissue thus yielded a significantly higher spatial variance than the intrinsic variance of the ISOCT instrument.

Figure 4

Histograms of D values from tissue and skeletal compartments of Merulina ampliata and Diploastrea heliopora. Frequency plotted reflects likelihood of a 5 × 5 μm pixel having a given D value.


In this proof-of-concept study, we demonstrate that visible light ISOCT, which combines the structural and chemical analytic capabilities of spectroscopy with the high-resolution 3-D imaging of OCT, enables the non-invasive mapping of fundamental optical properties of coral tissue including chlorophyll a concentration, the absorption coefficient, the scattering and the reduced scattering coefficients, and the critical parameters governing the angular distribution of scattered light (g and D). In addition, ultrastructural properties such as the variance of the refractive index within tissue and the correlation length scale of the refractive index variations can also be estimated. This ability to non-invasively extract and 3-D map fundamental optical and structural properties in living corals is a breakthrough in coral biology, which now allows the quantification of optical parameters needed for rigorous simulations of light transport in corals.

The spectral decomposition in ISOCT enables more accurate and more complete characterization of light scattering in coral tissue. Previous studies of optical transport in corals have focused on coral controls of Symbiodiniaceae light exposure due to tissue scattering and lateral light transport19,37 and skeletal scattering13,15,59. Hitherto, simulations of light propagation in corals have largely relied on the assumption that light scattering direction in coral tissue is dictated by the Henyey-Greenstein phase function, which is a special case of the Whittle-Matérn phase function when D = 337,50. ISOCT spectral decomposition now enables the actual measurement of D in living coral tissue, thus removing the need for the Henyey-Greenstein approximation. Indeed, as seen in Fig. 2, coral tissue D values vary significantly with location. This variability is an inherent property of coral tissue and is significantly greater than the technical variability of measuring D. By precisely measuring D and g, accurate information regarding the scattering phase function can now be implemented in more refined models of light propagation in the coral tissue. With the capability of ISOCT to measure spatially resolved ultrastructure and optical properties, we foresee this technique to significantly enhance current understanding of light propagation throughout the coral holobiont. Beyond photophysiology, D is a key descriptor of coral tissue and skeletal ultrastructure and growth pattern, which can be used e.g. as a proxy for the rate of coral calcification15,31, and in tissue, D of cell nuclei has been shown to be a critical regulator of transcriptional plasticity60.

There are, however, limitations of ISOCT-based measurements of optical and structural properties that must be considered for corals. First, the limited penetration depth of OCT imaging in the visible spectral range is restricted to superficial regions of tissue and skeleton. In fact, where coral tissue was thick in regions between skeletal plates or protrusions, the coral skeleton was not visible with our OCT system. The difficulty in imaging through thick coral tissue is compounded by the limitations in effective working range, as all Fourier domain OCT systems have a roll-off in image intensity with depth61. While the limitation of roll-off can be somewhat alleviated through motorized stage control and application of automated surface detection and stitching algorithms, the limited optical penetration in the visible range required for analysis of chlorophyll a concentration restricts application of this technique to the soft tissue compartment and superficial skeleton only in regions where tissue is thin. Additionally, the analysis method presented here relies on several assumptions regarding the coral tissue structure in order to determine the optical and structural properties presented. In the calculation of μt from each compartment, it was thus assumed that the medium was randomly homogeneous in keeping with Beer-Lambert law along the 90 μm depth of fitting. While this is a fair assumption for many tissue regions, the region of averaging, in some cases, might include distinct layers of epidermis, mesoglea, and gastrodermis, which may have different attenuation properties. For a coarse modeling of optical transport, such bulk properties may still be of use, but a strength of OCT in this application is its measurement of optical properties with high spatial resolution that will allow for a more detailed analysis of photon propagation in these specific tissue compartments in future study. For instance, transmission electron microscopy (TEM) has been used to image the nanoscale structure of tissue as an independent metric of the statistical mass-density autocorrelation function characterized with ISOCT62,63. These complementary techniques can be applied to each compartment of the tissue to fully characterize the structural properties and scattering therein. The coral skeleton presents a separate challenge with topographic roughness, and optical properties in this study were only measured from the top of septal plates where structure within the skeleton appeared homogeneous in OCT B-scans. While the interpretation of anatomical features in OCT scans of living corals remains unclear for certain species, the tissue stripping presented in Supplementary Video 3 confirms septal plates are clearly discernable through the tissue with visible OCT.

The linear fitting used to separate scattering and absorption coefficients from μt relied on the assumption that chlorophyll a was the predominant absorber present in the coral tissue, simplifying this fitting procedure. A more detailed analysis taking into account additional absorbing pigments in the coral tissue such as endogenous fluorophores, fluorescent and non-fluorescent host pigments, in pigment granules22,24 is feasible, provided the pigment absorption spectrum is known a priori and it contains a distinctive feature within the visible wavelength band analyzed. Fitting the measured backscattering spectrum to calculate fractal dimension, D, relies on the assumption that the autocorrelation function of the medium can be modeled as a Whittle-Matérn function and that the first-order Born approximation applies. These approximations have been applied to the analysis of mammalian tissues previously27,28,48,50, and when the influence of absorbing pigments is properly compensated should also be applicable to media such as coral tissue. The average chlorophyll a areal density mapped in Fig. 3 is 29.5 ± 14.4 µg cm−2 for Merulina ampliata and 17.9 ± 15.8 µg cm−2 for Diploastrea heliopora. These values are comparable to chlorophyll a concentrations measured in tissues of several species of healthy corals, which can range between 3 and 50 µg cm−264,65,66,67,68,69.

ISOCT allows for direct measurement of optical properties and 3-D micro-morphology in living corals, which will facilitate the understanding of light propagation and radiative energy budgets in corals. This is key to a better mechanistic understanding of coral photophysiology and thermal resilience in a changing climate. The emerging picture is that of a tissue-skeletal system that modulates optical and thermal properties of corals through a variety of strategies to optimize light regimes and heating for the photosynthetic algal symbionts harbored in their tissues. The strategies uncovered range from skeletal- and tissue- light scattering that increase symbiont light exposure13,15,16,18,29,37,70 to fluorescent pigments in the tissue that modulate light absorption, light scattering and heating in the tissue22,24,25,71 to dynamic light redistribution resulting from tissue contraction and expansion18,19,20. Skeletal light scattering has been implicated in the acceleration of light stress of in hospite Symbiodiniaceae under increased temperature by a positive feedback-loop between photodamage and symbiont loss that results in coral bleaching13,15,16,70 and can affect coral recovery from bleaching events72. Green fluorescent protein-like host pigments have been shown to reduce coral tissue heating and light absorption by increased light scattering at high concentrations of pigment, which enhances reflectivity and thus diminishes light penetration further into the tissue leading to reduced tissue heating24. These different properties vary significantly among coral species resulting in unique light microenvironments for the symbiont algae and distinct stress-mitigating strategies15,16,18,19,73. Imaging both skeletal and tissue compartments in intact living corals will help to further elucidate different photophysiology responses to thermal stress, which is an exciting avenue of ongoing coral research utilizing ISOCT. Current developments in low cost and portable OCT technology could further enable the application of this ISOCT approach to study live corals in their native habitat74,75.


Here we introduce the novel application of ISOCT to study the microscale structure and optical properties of live corals. We believe this technique to be unique for this application in its ease of use, imaging speed, spectral information, high working distance, and micron-scale resolution. We establish preliminary findings suggesting high spatial microvariability in coral tissue fractal dimension, indicating usage of the Henyey-Greenstein phase function to be unsuitable for modeling of light scattering in some regions of corals. The rapid imaging speed and low phototoxicity of ISOCT could be used in future studies to monitor real-time responses to stressors or other stimuli. Furthermore, spectroscopic analysis of the ISOCT signal could be used to infer nanoscale changes in cellular structure, such as dysregulated nuclear chromatin condensation, or altered absorption profiles from changes in pigment expression and Symbiodiniaceae distribution. The inherent quantitative and spatially-resolved nature of ISOCT will also prove useful in future study of photonic transport within the whole holobiont, an effect that until now has only been studied separately in coral skeletons and tissues. Our study provides a new tool that allows for non-invasive high-resolution quantification of chlorophyll a pigment density in live corals.

Data Availability

The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.

Change history

  • 27 November 2019

    An amendment to this paper has been published and can be accessed via a link at the top of the paper.


  1. 1.

    Fisher, R. et al. Species richness on coral reefs and the pursuit of convergent global estimates. Curr. Biol. 25, 500–505 (2015).

    CAS  Google Scholar 

  2. 2.

    Wilkinson, C. Status of Coral Reefs of the World: 2008. Status of Coral Reefs of the World: 2008 (2008).

  3. 3.

    Muscatine, L. The role of symbiotic algae in carbon and energy flux in coral reefs. In Ecosystems of the World (ed. Zubinsky, Z.) 75–87 (Elsevier Science Publishing Company, Inc., 1990).

  4. 4.

    Falkowsky, P., Jokiel, P. & Kinzie, R. Irradiance and corals. In Ecosystems of the World 25: Coral Reefs (ed. Dubinsky, Z.) 89–107 (Elsevier, 1990).

  5. 5.

    Suggett, D. J., Warner, M. E. & Leggat, W. Symbiotic Dinoflagellate Functional Diversity Mediates Coral Survival under Ecological Crisis. Trends Ecol. Evol. 32, 735–745 (2017).

    PubMed  Google Scholar 

  6. 6.

    Warner, M. E., Fitt, W. K. & Schmidt, G. W. Damage to photosystem II in symbiotic dinoflagellates: A determinant of coral bleaching. Proc. Natl. Acad. Sci. 96, 8007–8012 (1999).

    ADS  CAS  Google Scholar 

  7. 7.

    Bhagooli, R. & Hidaka, M. Photoinhibition, bleaching susceptibility and mortality in two scleractinian corals, Platygyra ryukyuensis and Stylophora pistillata, in response to thermal and light stresses. Comp. Biochem. Physiol. Part A 137, 547–555 (2004).

    Google Scholar 

  8. 8.

    Lesser, M. & Farrell, J. Exposure to solar radiation increases damage to both host tissues and algal symbionts of corals during thermal stress. Coral Reefs 23, 367–377 (2004).

    Google Scholar 

  9. 9.

    Downs, C. A. et al. Heat-Stress and Light-Stress Induce Different Cellular Pathologies in the Symbiotic Dinoflagellate during Coral Bleaching. PLoS One 8, 1–16 (2013).

    Google Scholar 

  10. 10.

    Hoegh-Guldberg, O. et al. Coral Reefs Under Rapid Climate Change and Ocean Acidification. Science (80-.). 318, 1737–1743 (2008).

    ADS  Google Scholar 

  11. 11.

    Baker, A. C., Glynn, P. W. & Riegl, B. Climate change and coral reef bleaching: An ecological assessment of long-term impacts, recovery trends and future outlook. Estuar. Coast. Shelf Sci. 80, 435–471 (2008).

    ADS  Google Scholar 

  12. 12.

    Kühl, M., Cohen, Y., Dalsgaard, T., Jorgensen, B. B. & Revsbech, N. P. Microenvironment and photosynthesis of zooxanthellae in scleractinian corals studied with microsensors for O2, pH and light. Mar. Ecol. Prog. Ser. 117, 159–177 (1995).

    ADS  Google Scholar 

  13. 13.

    Enriquez, S., Mendez, E. R. & Iglesias-Prieto, R. Multiple scattering on coral skeletons enhances light absorption by symbiotic algae. Limnol. Oceanogr. 50, 1025–1032 (2005).

    ADS  Google Scholar 

  14. 14.

    Terán, E., Méndez, E. R., Enríquez, S. & Iglesias-Prieto, R. Multiple light scattering and absorption in reef-building corals. Appl. Opt. 49, 5032 (2010).

    ADS  PubMed  Google Scholar 

  15. 15.

    Marcelino, L. A. et al. Modulation of Light-Enhancement to Symbiotic Algae by Light-Scattering in Corals and Evolutionary Trends in Bleaching. PLoS One 8 (2013).

    ADS  CAS  PubMed  PubMed Central  Google Scholar 

  16. 16.

    Swain, T. D. et al. Skeletal light-scattering accelerates bleaching response in reef-building corals. BMC Ecol. 16, 10 (2016).

    PubMed  PubMed Central  Google Scholar 

  17. 17.

    Wangpraseurt, D., Wentzel, C., Jacques, S. L., Wagner, M. & Ku, M. In vivo imaging of coral tissue and skeleton with optical coherence tomography. J. R. Soc. Interface 14 (2017).

  18. 18.

    Wangpraseurt, D., Larkum, A. W. D., Ralph, P. J., Kühl, M. & Michelou, V. K. Light gradients and optical microniches in coral tissues. Front. Microbiol. 3, 1–9 (2012).

    Google Scholar 

  19. 19.

    Wangpraseurt, D., Larkum, A. W. D., Franklin, J., Szabó, M. & Ralph, P. J. Lateral light transfer ensures efficient resource distribution in symbiont-bearing corals. 489–498, (2014).

    Google Scholar 

  20. 20.

    Lichtenberg, M., Larkum, A. W. D. & Kühl, M. Photosynthetic acclimation of Symbiodinium in hospite depends on vertical position in the tissue of the scleractinian coral Montastrea curta. Front. Microbiol. 7, 1–13 (2016).

    Google Scholar 

  21. 21.

    Schlichter, D., Fricke, H. W. & Weber, W. Light harvesting by wavelength transformation in a symbiotic coral of the Red Sea twilight zone. Mar. Biol. 91, 403–407 (1986).

    Google Scholar 

  22. 22.

    Salih, A., Larkum, A., Cox, G., Kühl, M. & Hoegh-Guldberg, O. Fluorescent pigments in corals are photoprotective. Nature 408, 850–853 (2000).

    ADS  CAS  PubMed  Google Scholar 

  23. 23.

    Smith, E. G., D’Angelo, C., Salih, A. & Wiedenmann, J. Screening by coral green fluorescent protein (GFP)-like chromoproteins supports a role in photoprotection of zooxanthellae. Coral Reefs 32, 463–474 (2013).

    ADS  Google Scholar 

  24. 24.

    Lyndby, N. H., Kühl, M. & Wangpraseurt, D. Heat generation and light scattering of green fluorescent protein-like pigments in coral tissue. Sci. Rep. 6, 26599 (2016).

    ADS  CAS  PubMed  PubMed Central  Google Scholar 

  25. 25.

    Jimenez, I. M., Larkum, A. W. D., Ralph, P. J. & Kühl, M. Thermal effects of tissue optics in symbiont-bearing reef-building corals. Limnol. Oceanogr. 57, 1816–1825 (2012).

    ADS  Google Scholar 

  26. 26.

    Stimson, J. The annual cycle of density of zooxanthellae in the tissues of field and laboratory-held Pocillopora damicornis (Linnaeus). J. Exp. Mar. Bio. Ecol. 214, 35–48 (1997).

    Google Scholar 

  27. 27.

    Rogers, J. D., Capoğlu, I. R. & Backman, V. Nonscalar elastic light scattering from continuous random media in the Born approximation. Opt. Lett. 34, 1891–3 (2009).

    ADS  PubMed  PubMed Central  Google Scholar 

  28. 28.

    Capoğlu, I. R., Rogers, J. D., Taflove, A. & Backman, V. Accuracy of the Born approximation in calculating the scattering coefficient of biological continuous random media. Opt. Lett. 34, 2679–2681 (2009).

    ADS  PubMed  Google Scholar 

  29. 29.

    Wangpraseurt, D. et al. The in situ light microenvironment of corals. Limnol. Oceanogr. 59, 917–926 (2014).

    ADS  Google Scholar 

  30. 30.

    Backman, V., Wax, A. & Zhang, H. F. A Laboratory Manual in Biophotonics. (CRC Press, 2018).

  31. 31.

    Swain, T. D. et al. Relating Coral Skeletal Structures at Different Length Scales to Growth, Light Availability to Symbiodinium, and Thermal Bleaching. Front. Mar. Sci. 5 (2018).

  32. 32.

    Von Euw, S. et al. Biological control of aragonite formation in stony corals. Science (80-.). 356, 933–938 (2017).

    ADS  Google Scholar 

  33. 33.

    Cuif, J. P. & Dauphin, Y. The environment Recording Unit in coral skeletons - a synethesis of strucural and chemical evdinces for a biochemically driven, stepping-growth process in fibres. Biogeosciences, Eur. Geosci. Union 2, 61–73 (2005).

    ADS  CAS  Google Scholar 

  34. 34.

    Rogers, J. D., Radosevich, A. J., Ji, Y. & Backman, V. Modeling Light Scattering in Tissue as Continuous Random Media Using a Versatile Refractive Index Correlation Function. IEEE J. Sel. Top. Quantum Electron. 20, 173–186 (2014).

    ADS  Google Scholar 

  35. 35.

    Levy, O., Achituv, Y., Yacobi, Y. Z., Dubinsky, Z. & Stambler, N. Diel ‘tuning’ of coral metabolism: physiological responses to light cues. J. Exp. Biol. 209, 273–283 (2006).

    CAS  PubMed  Google Scholar 

  36. 36.

    Venn, A. A., Wilson, M. A., Trapido-Rosenthal, H. G., Keely, B. J. & Douglas, A. E. The impact of coral bleaching on the pigment profile of the symbiotic alga, Symbiodinium. Plant, Cell Environ. 29, 2133–2142 (2006).

    CAS  Google Scholar 

  37. 37.

    Wangpraseurt, D., Jacques, S. L., Petrie, T., Kühl, M. & Hochberg, E. J. Monte Carlo Modeling of Photon Propagation Reveals Highly Scattering Coral Tissue. Front. Plant Sci. 7, 1–10 (2016).

    Google Scholar 

  38. 38.

    Kaandorp, J. A. & Sloot, P. M. A. Morphological Models of Radiate Accretive Growth and the Influence of Hydrodynamics. J Theor Biol 209, 257–274 (2001).

    CAS  PubMed  Google Scholar 

  39. 39.

    Huang, D. et al. Optical coherence tomography. Science 254, 1178–1181 (1991).

    ADS  CAS  PubMed  PubMed Central  Google Scholar 

  40. 40.

    Shimada, Y., Sadr, A., Sumi, Y. & Tagami, J. Application of Optical Coherence Tomography (OCT) for Diagnosis of Caries, Cracks, and Defects of Restorations. Curr. Oral Heal. Reports 2, 73–80 (2015).

    Google Scholar 

  41. 41.

    Winkelmann, J. A. et al. Spectral contrast optical coherence tomography angiography enables single-scan vessel imaging. Light Sci. Appl. 8 (2019).

  42. 42.

    Xu, C., Marks, D. L., Do, M. N. & Boppart, S. A. Separation of absorption and scattering profiles in spectroscopic optical coherence tomography using a least-squares algorithm. Opt. Express 12, 4790 (2004).

    ADS  CAS  PubMed  Google Scholar 

  43. 43.

    Roth, M. S. The engine of the reef: photobiology of the coral – algal symbiosis. Front. Microbiol. 5, 1–22 (2014).

    Google Scholar 

  44. 44.

    Naumann, M. S., Niggl, W., Laforsch, C., Glaser, C. & Wild, C. Coral surface area quantification – evaluation of established techniques by comparison with computer tomography. Coral Reefs 28, 109–117 (2009).

    ADS  Google Scholar 

  45. 45.

    Levitz, D. et al. Determination of optical scattering properties of highly-scattering media in optical coherence tomography images. Opt. Express 12, 543–545 (2004).

    Google Scholar 

  46. 46.

    Henyey, L. G. & Greenstein, J. L. Diffuse radiation in the Galaxy. Astrophys. J. 93, 70–83 (1941).

    ADS  MATH  Google Scholar 

  47. 47.

    Spicer, G. L. C. et al. Detection of Extracellular Matrix Modification in Cancer Models with Inverse Spectroscopic Optical Coherence Tomography. Phys. Med. Biol. 61, 6892–6904 (2016).

    CAS  PubMed Central  Google Scholar 

  48. 48.

    Yi, J. & Backman, V. Imaging a full set of optical scattering properties of biological tissue by inverse spectroscopic optical coherence tomography. Opt. Lett. 37, 4443–5 (2012).

    ADS  PubMed  PubMed Central  Google Scholar 

  49. 49.

    Yi, J. et al. Spatially resolved optical and ultrastructural properties of colorectal and pancreatic field carcinogenesis observed by inverse spectroscopic optical coherence tomography. J. Biomed. Opt. 19, 36013 (2014).

    PubMed  Google Scholar 

  50. 50.

    Yi, J. et al. Can OCT be sensitive to nanoscale structural alterations in biological tissue? Opt. Express 21, 1642–1645 (2013).

    Google Scholar 

  51. 51.

    Azarin, S. M. et al. In vivo capture and label-free detection of early metastatic cells. Nat Commun 6 (2015).

  52. 52.

    Liu, R. et al. Single capillary oximetry and tissue ultrastructural sensing by dual-band dual-scan inverse spectroscopic optical coherence tomography. Light Sci. Appl. 7, 57 (2018).

    ADS  PubMed  PubMed Central  Google Scholar 

  53. 53.

    Xu, M. & Alfano, R. R. Fractal mechanisms of light scattering in biological tissue and cells. Opt. Lett. 30, 3051–3053 (2005).

    ADS  CAS  PubMed  Google Scholar 

  54. 54.

    Akira Ishimaru. Wave Propagation and Scattering in Random Media. (IEEE Publications, 1997).

  55. 55.

    Jacques, S. L. Optical properties of biological tissues: a review. Phys. Med. Biol. 58, R37–R61 (2013).

    ADS  PubMed  Google Scholar 

  56. 56.

    Binzoni, T., Leung, T. S., Gandjbakhche, A. H., Rüfenacht, D. & Delpy, D. T. The use of the Henyey–Greenstein phase function in Monte Carlo simulations in biomedical optics. Phys. Med. Biol. 51, N313 (2006).

    ADS  CAS  PubMed  Google Scholar 

  57. 57.

    Lagarias et al. Convergence properties of the nelder–mead simplex method in low dimensions. SIAM J. Optim. 9, 112–147 (1998).

    MathSciNet  MATH  Google Scholar 

  58. 58.

    Jacques, S. L. & Prahl, S. Chlorophyll A. PhotochemCAD package Available at, (1997).

  59. 59.

    Stambler, N. & Dubinsky, Z. Corals as light collectors: an integrating sphere approach. Coral Reefs 24, 2–9 (2005).

    Google Scholar 

  60. 60.

    Almassalha, L. M. et al. Macrogenomic engineering via modulation of the scaling of chromatin packing density. Nat. Biomed. Eng. 1, 902–913 (2017).

    CAS  PubMed  PubMed Central  Google Scholar 

  61. 61.

    Wojtkowski, M. et al. Ultrahigh-resolution, high-speed, Fourier domain optical coherence tomography and methods for dispersion compensation. Opt. Express 12, 707–709 (2004).

    Google Scholar 

  62. 62.

    Yi, J., Stypula-Cyrus, Y., Blaha, C., Roy, H. K. & Backman, V. Fractal characterization of chromatin decompaction in live cells. Biophys. J. 109, 1–9 (2015).

    Google Scholar 

  63. 63.

    Li, Y. et al. Measuring the Autocorrelation Function of Nanoscale Three- Dimensional Density Distribution in Individual Cells Using Scanning Transmission Electron Microscopy, Atomic Force Microscopy, and a New Deconvolution Algorithm. Microsc Microanal 23, 661–667 (2017).

    ADS  CAS  PubMed  PubMed Central  Google Scholar 

  64. 64.

    Winters, G., Holzman, R., Blekhman, A., Beer, S. & Loya, Y. Photographic assessment of coral chlorophyll contents: Implications for ecophysiological studies and coral monitoring. J. Exp. Mar. Bio. Ecol. 380, 25–35 (2009).

    CAS  Google Scholar 

  65. 65.

    Apprill, A. M., Bidigare, R. R. & Gates, R. D. Visibly healthy corals exhibit variable pigment concentrations and symbiont phenotypes. Coral Reefs 26, 387–397 (2007).

    ADS  Google Scholar 

  66. 66.

    Bellworthy, J. & Fine, M. Beyond peak summer temperatures, branching corals in the Gulf of Aqaba are resilient to thermal stress but sensitive to high light. Coral Reefs 36, 1071–1082 (2017).

    ADS  Google Scholar 

  67. 67.

    Brown, B. E., Dunne, R. P., Goodson, M. S. & Douglas, A. E. Experience shapes the susceptibility of a reef coral to bleaching. Coral Reefs 21, 119–126 (2002).

    Google Scholar 

  68. 68.

    Siebeck, U. E., Marshall, N. J., Klüter, A. & Hoegh-Guldberg, O. Monitoring coral bleaching using a colour reference card. Coral Reefs 25, 453–460 (2006).

    ADS  Google Scholar 

  69. 69.

    Anthony, K. R. N. & Hoegh-Guldberg, O. Variation in coral photosynthesis, respiration and growth characteristics in contrasting light microhabitats: an analogue to plants in forest gaps and understoreys? Funct. Ecol. 17, 246–259 (2003).

    Google Scholar 

  70. 70.

    Wangpraseurt, D. et al. In vivo microscale measurements of light and photosynthesis during coral bleaching: Evidence for the optical feedback loop? Front. Microbiol. 8, 1–12 (2017).

    Google Scholar 

  71. 71.

    Dove, S. G. & Ranganathan, O. H. S. Major colour patterns of reef-building corals are due to a family of GFP-like proteins. Coral Reefs 197–204, (2006).

    Google Scholar 

  72. 72.

    Rodriguez-Roman, A., Hernandez-Pech, X., Thome, P. E., Enriquez, S. & Iglesias-Prieto, R. Photosynthesis and light utilization in the Caribbean coral Montastrea faveolata recovering from a bleaching event. Light Sci. Appl. 51, 2702–2710 (2006).

    Google Scholar 

  73. 73.

    Gittins, J. R., D’Angelo, C., Oswald, F., Edwards, R. J. & Wiedenmann, J. Fluorescent protein-mediated colour polymorphism in reef corals: Multicopy genes extend the adaptation/acclimatization potential to variable light environments. Mol. Ecol. 24, 453–465 (2015).

    CAS  PubMed  PubMed Central  Google Scholar 

  74. 74.

    Kim, S. et al. Design and implementation of a low-cost, portable OCT system. Biomed. Opt. Express 9, 1232–1243 (2018).

    CAS  PubMed  PubMed Central  Google Scholar 

  75. 75.

    Song, G. et al. First Clinical Application of Low-Cost OCT. Transl. Vis. Sci. Technol. 8, 1–12 (2019).

    ADS  Google Scholar 

Download references


The authors thank Shedd Aquarium for providing coral fragments for study. This work was supported by NSF Grant CBET-1340617 (VB), grants from the Independent Research Fund Denmark (MK; DFF-6144-00086B & DFF-8021-00308B), the Carlsberg Foundation (MK), the Villum Foundation (MK; Grant No. 00023073) and the European Union’s Horizon 2020 research and innovation programme (702911-BioMIC-FUEL, DW).

Author information




G.L.C.S., A.E. and T.D.S. conducted experiments and analysis. J.A.W., J.Y. and G.L.C.S. built the instrument. D.W., T.D.S., M.K. and L.M. interpreted the data. L.A.M., J.Y. and V.B. supervised the study. All authors interpreted data and contributed to the manuscript.

Corresponding authors

Correspondence to L. A. Marcelino or V. Backman.

Ethics declarations

Competing Interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Spicer, G.L.C., Eid, A., Wangpraseurt, D. et al. Measuring light scattering and absorption in corals with Inverse Spectroscopic Optical Coherence Tomography (ISOCT): a new tool for non-invasive monitoring. Sci Rep 9, 14148 (2019).

Download citation


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing