Host-parasite co-evolution history is lacking when parasites switch to novel hosts. This was the case for Western honey bees (Apis mellifera) when the ectoparasitic mite, Varroa destructor, switched hosts from Eastern honey bees (Apis cerana). This mite has since become the most severe biological threat to A. mellifera worldwide. However, some A. mellifera populations are known to survive infestations, largely by suppressing mite population growth. One known mechanism is suppressed mite reproduction (SMR), but the underlying genetics are poorly understood. Here, we take advantage of haploid drones, originating from one queen from the Netherlands that developed Varroa-resistance, whole exome sequencing and elastic-net regression to identify genetic variants associated with SMR in resistant honeybees. An eight variants model predicted 88% of the phenotypes correctly and identified six risk and two protective variants. Reproducing and non-reproducing mites could not be distinguished using DNA microsatellites, which is in agreement with the hypothesis that it is not the parasite but the host that adapted itself. Our results suggest that the brood pheromone-dependent mite oogenesis is disrupted in resistant hosts. The identified genetic markers have a considerable potential to contribute to a sustainable global apiculture.
The ubiquitous ectoparasitic mite Varroa destructor, an invasive species from Asia, is the most important biological driver of global losses of honey bee, Apis mellifera, colonies1. A. mellifera is not the original host however as this mite occurred first in the Asian honey bee, Apis cerana1. Whereas A. cerana and V. destructor have a long history of co-evolution, this is not the case for A. mellifera2. This short period of co-evolution has left A. mellifera vulnerable2. To avoid colony collapse, treatment with acaricides seemed the best option and this is what mite control strategies have relied on for more than five decades. However, scattered observations in affected regions show that untreated honey bee colonies can survive mite infestations3,4,5. This prompted several initiatives aimed at breeding these V. destructor-tolerant or -resistant bees (VR)6,7,8. ‘Tolerance’ is a defence strategy whereby the host can limit the harm caused by a given parasite burden, whereas ‘resistance’ refers to the ability of the host to limit the actual parasite burden itself9. Both social and individual traits have been implicated in the defence against the V. destructor-mite. Varroa sensitive hygiene (VSH) is a social behaviour trait that consists of three components (detection, opening and removal of infested and damaged pupae) that are each inherited independently9 and is expressed by the adult worker honey bees. It was formerly called ‘suppressed mite reproduction’ (SMR) as reproductive mites were eliminated by hygienic behaviour. However, the term SMR is no longer used for the social, hygienic behaviour as true SMR has been observed in several populations. As such, SMR is currently defined as a trait where mites fail to produce offspring in honey bee pupae by a not yet identified mechanism. This phenomenon of true resistance emerged independently from natural selection on the island Gotland (Sweden5) and in Avignon (France4), and there are subtle differences between these two distinct bee populations in how they succeed in reducing the reproductive success of the V. destructor mites. In more detail, these resistance phenotypes are delayed oviposition and actual infertility of the mother mites, respectively10. SMR can be expressed both in worker and drone brood, which are called worker and drone brood resistance (DBR), respectively. Whereas both types of resistance are beneficial, drone brood has a longer pupation time relative to worker brood, which gives the V. destructor parasite more time to reproduce. As a consequence, any disturbance of mite reproduction in drone brood will affect mite population dynamics significantly9.
Given the burden on the honey bee population, unravelling the genetic architecture of DBR has recently gained much interest for several reasons11. Firstly, identifying the exact molecular mechanisms might lead to a better understanding of the host pathogen interaction and new eradication strategies. Secondly, the identification of genetic markers associated with the phenotype can also immediately be used to selectively breed colonies that are more resistant.
Here, we investigate the possibility to identify DBR-associated markers by comparing VR and V. destructor-sensitive drones (VS). One of the difficulties when performing these kind of case-control studies is however the risk of spurious associations that might arise due to population stratification12,13. An ideal solution is having access to one population where all cases and controls are equally related. As within a colony, it is one queen that gives rise to many equally related drones, we aimed to create one colony containing both VR and VS drones at equal frequencies by selective breeding.
When successful, both reproducing and non-reproducing mites will be identified in that colony. While non-reproducing mites can be a true consequence of host adaptation, which is the desired mechanism, non-reproduction might however also be a consequence of these mites being a distinct subgroup of V. destructor parasites lacking the ability to reproduce. While we hypothesize that non-reproduction is a consequence of host adaptation, this will first be investigated using microsatellites of both reproducing and non-reproducing V. destructor mites. Upon confirmation of DBR, the identification of markers can be initiated.
Previously, attempts to identify quantitative trait loci all relied on coarse (with at most 3000 markers) and indirect (i.e. linkage disequilibrium-based) mapping strategies, often with inconsistent results14,15,16. The downside of these indirect approaches is that they always require further steps downstream (e.g. fine mapping, candidate gene sequencing). Contrary to this approach, whole exome sequencing (WES) has the potential to identify disease-causing mutations directly if they fall within target regions. But even if causal mutations reside outside target regions, WES variants discovered during sequencing can be used as tagvariants to identify regions associated with the phenotype17. Based on previous experiences18,19, we hypothesize that WES will allow mapping at a far higher resolution relative to previous approaches. As such, we aimed to develop and evaluate the first WES design for the honey bee and immediately assessed its performance to identify variants associated with DBR.
While WES is a technological step forward, association studies, including the coarse mapping studies already performed for DBR, still often use single variant association tests in their data analysis. Given the phenotype and in line with previous studies, a multifactorial, complex inheritance mode was however expected for DBR14,15,16. As this involves the combination of an (unknown) number of loci and single-marker tests only analyze the marginal effect between a phenotype and a variant, these single-marker tests ignore important information when multiple variants are associated with complex phenotypes. In this study, we use a novel analysis method, called elastic-net penalized regression, that allows joint modelling of variants and hypothesize it outperforms the standardly used single-marker tests.
Finally, to allow a broad use of markers identified in one single colony, it is important that these markers segregate in the general population. We investigate this hypothesis by performing a population screening.
Creating a hybrid VR/VS colony
Virgin queens from honey bee stocks selected for VR were selected from different locations in Europe. Three populations became VR after several years being left untreated against the V. destructor-mite in the Netherlands (Amsterdam Water Dunes20), France (Toulouse21) and Norway (Østlandet Region22). From Belgium, virgin sister queens from a breeding queen with the highest recorded Varroa-index for Belgium in 2014 were selected. This Varroa-index combines measurements of the V. destructor population dynamics and hygienic behaviour (further explained in materials and methods)8.
These queens were next crossed twice with local VS drones (Fig. 1). In more detail, this implies single VS drone artificial insemination of VR queens in the parental generation (P), leading to hybrid VR/VS queens in the first filial generation (F1). These F1 hybrid queens carrying both VR- and VS-associated alleles were then mated naturally with local VS drones. As only the queens give rise to drones in the subsequent generation, this allows segregation of both VR and VS alleles in the second filial (F2) haploid drone brood generation (Fig. 1). To eliminate the effect of environment as much as possible, all F2 colonies were reared at the same location. All five populations (the four VR hybrids and the control strain) were successfully bred and maintained.
Screening for the DBR phenotype
Individual host brood cells were opened at the adequate age and assessed for V. destructor-mite infestation (as described in more detail in materials and methods). This screening revealed that the percentage of non-reproducing mites in these four hybrid VR populations was 51.0% (the Netherlands), 37.5% (France), 31.6% (Norway) and 14.0% (Belgium), respectively, whereas this percentage was 19.0% in a local VS control strain (Table S1). The colony from the Netherlands had the highest frequency non-reproducing mites. This was also the only colony where this frequency was significantly higher relative to the local control strain (P = 0.01), which indicates that the DBR phenotype from this colony can be transmitted to subsequent generations, i.e. it is suggestive for a genetically-based resistance mechanism. Furthermore, since the queens of the F1 generation were VR/VS hybrids, the outcome of F2 DBR typing for this colony was even unexpectedly high (expected maximum score was 50%) and corresponds to what can be expected in a Mendelian mode of inheritance, which makes it ideal for subsequent association studies. As such, this Dutch colony was selected and used further downstream in the WES part of this study.
Varroa destructor-mite genotyping
In order to verify whether the observed DBR phenomenon is due to host adaptations and not a parasite-mediated effect, 56 mother mite specimens originating from drone brood cells with non-reproducing mites (=DBR phenotype) or with reproducing mites were genotyped at 13 microsatellite loci (Table S2)23. All 13 loci amplified successfully, which led to a total of 23 different alleles, varying from one to eight per locus (Table S2). Per colony, the effective number of alleles ranged from 1.145 to 1.502 (Table S3). The observed heterozygosity HO values were very low ranging from 0.000 to 0.077. The mean expected heterozygosity HE was 0.130, with values ranging from 0.075 to 0.186 within each colony. As expected, the inbreeding coefficients were very high (mean: 0.788) demonstrating clear evidence of inbreeding between the V. destructor-mites within a colony (Table S3). Furthermore, no significant differences in these genetic parameters were found between reproducing and non-reproducing mites from a colony (Paired t-tests, df = 7, P > 0.05), nor when comparing all reproducing and non-reproducing mites (Independent t-tests, df = 6, P > 0.05). The Evanno method identified ΔK = 2, which implies that K (or the number of populations) equals two or one (as ΔK cannot be used to distinguish those two values)24. Based on the results from the individual mites, K was set to one as each mite belonged for approximately 50% to both groups (Fig. 2). This implies that these mites could not be genetically distinguished from each other. Based on these results, the observed DBR seems to represent the real and desired genetic resistance phenotype and is not a consequence of differences between mites that might mimic it.
Whole exome sequencing
To identify genetic variants associated with the DBR phenotype, a WES design targeting all exons of the A. mellifera genome (Amel.4.5)25 was developed. This design contained 26,184,643 base pairs (bp) divided over 81,571 regions. Sixty-four drones (32 DBR positive; 32 DBR negative), originating from the colony from the Netherlands (i.e. from the colony that differed significantly from the local control strain in terms of the number of non-reproducing mites), were selected and Illumina sequenced. In these drones, a median coverage of 64.5x was obtained, while >97% of the 26 Mb target bp pairs were covered at ≥10x (Fig. S2; Table S4). In terms of regions, the median number of regions that were entirely sequenced at ≥10x was 91.3% (Fig. S3; Table S4). The sequencing reproducibility was high, with close to 75% of the regions entirely sequenced in all samples. Similar to other WES designs, we found that sequencing performance was inversely correlated with target region length and low complexity/highly repetitive nucleotide composition, whereas GC nucleotide composition of a target region and quality of the target region (reflected by the proportion of ambiguous nucleotides in the target region) affected sequencing performance far less (Fig. S4; Table S5)19. The aforementioned results demonstrate that the novel WES design outperforms several WES designs in other species18,19.
Next, we looked at the number of variants that can be used for the association study. Overall, more than 140,000 variants with a call rate of at least 99% were discovered inside the exons. Both in terms of the number of markers (50 times higher), as with respect to the resolution (the median and mean distance between markers were 71 bp (first quartile: 18 bp – third quartile: 342 bp) and 1562 bp, respectively (Fig. S5)), this is by far the most dense study on DBR conducted up until now14,15,16.
Single-marker tests and elastic-net penalized regression
Whereas single-marker tests are most commonly used, previous studies on this phenotype have shown that these tests often lack the necessary power to obtain significant results15,16. The same result was observed here as no single variant reached genome-wide significance (Fig. S6). This was no surprise as for the proposed complex inheritance of the phenotype, single-marker tests are far from ideal as these tests only analyze the effect of an individual variant on a phenotype, while ignoring all the others26,27,28,29.
A potential solution is to model all variants jointly. In genetic studies, including the one presented here, there are however additional complications that have to be taken into account26,27,28,29,30. Firstly, the number of variants (=parameters p) often exceed the sample size n by far (often referred to as “the small n, large p” problem). Secondly, both due to the high dimensionality (i.e. the large number of variants) as the actual physical linkage between variants, different variants can be correlated with each other, leading to the multicollinearity problem.
Where standard multiple regression cannot deal with these issues, the so-called elastic-net penalized regression that combines the strengths of LASSO in terms of parameter selection and ridge regression to deal with correlated variants, solves all these problems26,27,28. Based on the combination of cross-validation and stringent cut-offs, elastic-nets have shown to control the number of false positives (often perfect, i.e. no single false positive result) while at the same time identifying a large number of true associated variants28. In this study, the same strict methodology was used, which resulted in eight variants (eight SNPs) in seven different genes that were found to be associated with the DBR phenotype (Table 1). From these eight mutations, two were missense, altering the amino-acid composition, while the remaining six were silent mutations. Altogether, this eight variants model predicted 88% of the initial sixty-four phenotypes correctly (56/64) (Table 2) and identified six risk (i.e. associated with a lower resistance to V. destructor mites) and two protective (i.e. associated with a higher resistance to V. destructor mites) variants.
So far, previous (coarse) mapping studies on DBR in the Swedish bee population identified loci at chromosome four, seven and nine15 and the chromosomes two, three and fifteen, respectively16. In our study, SNPs at chromosome nine and chromosome fifteen were retained in the final model. While we believe this substantiates the results found in this study, at the same time, it is clear that, in line with the (partially differing) DBR phenotype, both populations (the Swedish one from the previous studies versus our Dutch population from this study) also developed a unique way of dealing with the same parasite.
Allelic frequency analysis in the Belgian honey bee population
As a final step, a stratified sampling strategy was used to evaluate the allelic frequencies of the previously identified associated variants in the general bee population in Belgium. Sanger sequencing, each time two bees per colony for a total of 46 colonies, revealed a widespread distribution of all variants throughout the bee colonies (Table 1). This indicates that these variants are not colony specific, which facilitates their use in centrally coordinated population-wide selection programs. Furthermore, on average, the risk mutations were found in more colonies (89%; 41/46 colonies) relative to the protective mutations (43%; 20/46 colonies), which is no surprise given the widespread V. destructor-sensitivity in the Belgian honey bee population. Finally, in agreement with the expectations for complex diseases, there was a clear negative correlation (Spearman’s correlation coefficient = −0.38) between the prevalence of the mutations in the population and the effect size (i.e. the absolute magnitude of the β coefficients of the different variants as depicted in Table 1)31.
Hypothesized biological involvement of the identified genes
As mentioned and in agreement with literature, the DBR phenotype was expected to segregate in a complex manner, requiring the involvement of several genes14,15,16. In our study, variants in seven genes (i.e. mucin-12 isoform X1, solute carrier family 22 member 22, sodium-coupled monocarboxylate transporter-1, dynein beta chain, spectrin beta chain isoform X1 and two uncharacterized proteins; Table 1) were found and both synonymous and non-synonymous variants were identified. It goes without saying that these variants can both be actual phenotype-causing variants or might just be markers associated with it. While traditionally non-synonymous mutations are often focused on, recent studies, however, strongly support the potential role that synonymous mutations on (complex) phenotypes might have32,33,34. In addition, the involvement of the dynein beta chain in the DBR phenotype was remarkable, as it represents a cytoskeletal motor protein involved in intracellular retrograde transport along the microtubules of eukaryotic cilia and flagella35. Among insects, cilia/flagella are present in the sperm tail (flagellar) and in mechano- and chemosensory neurons (ciliary) only36,37. Moreover, the ciliary form of dynein that we identified here can exclusively be related with sensory functions of the honey bee antenna, most probably through its olfactory neurons.
In honey bees, brood care is secured through a few behavioural sequences (feeding, brood cell capping, thermoregulation) that are initiated by brood pheromones38. The sensing of these cuticular hydrocarbon pheromones occurs on the insects’ antennae, more in particularly by specialized olfactory sensillae39. It has been demonstrated that the V. destructor-mite synchronizes its reproduction with the ontogenic development of the honeybee larvae and that the mite’s oogenesis is triggered by volatiles of the larval cuticle40,41. We hypothesize that the DBR phenotype was obtained by two phenomenons. Firstly, the variant of the dynein beta chain found in DBR positive bee colonies causes a better pheromone sensing by an improved intracellular transport in the olfactory neurons. Secondly, the other variants cause a diminished production of the cuticular hydrocarbon brood pheromones by a reduced general or tissue-targeted (integumentum) metabolism. Here, the different transporters might play an important role42. Consequently, the pheromone release falls to a level that is no longer able to initiate oogenesis in the mite, although it permits normal chemical communication - and thus brood care - by the adult bees. The hypothesis links several of the genes from which a variant is associated with the DBR phenotype, but so far any experimental evidence is lacking. However, a similar strong involvement of the olfactory sensing has been demonstrated by transcriptome studies43,44,45 of the VSH phenotype that renders bees resistant to V. destructor-mite infestations by hygienic behaviour. In that case again intracellular transport and vesicle trafficking in the antennae is one of the underlying biological mechanisms44,46. In addition, in the Gotland VR bees a glucose-methanol-choline oxidoreductase was found to be putatively involved in changing volatiles emitted by the bee larvae14.
Selection for more resilient bees offers a sustainable solution for the main driver of global honey bee colony losses, i.e. the infestation by the ectoparasitic V. destructor mite. Although the voluntary denial of any treatment has already led several times to V. destructor-tolerant or -resistant bees, this approach is still difficult for the average beekeeper because of the high losses that may go with it. That is why unravelling how natural selection shapes resilient honey bee populations at both the phenotypic and genetic level, represents a crucial lever to support the classical selection programs through breeding value estimation or marker-assisted selection. The present work developed novel state-of-the-art methodologies for honey bees to discover genetic variants associated with the given trait.
Firstly, we have developed a WES design for the honey bee. In terms of performance, this newly developed WES design excels in comparison with WES designs from other species19. Furthermore, relative to for example RESTseq16,47 and the 44 K GWAS SNP assay48, far more variants are found, which should improve the identification of disease-associated variants, while relative to whole genome sequencing, it is a more cost-efficient approach until sequencing prices drop further. Focusing on exons, it is important to stress that variants outside the target regions are potentially missed, especially for those located at a distance of exonic variants. Overall however, this WES design fulfilled our expectations and we are confident that, for the time being, it will be a valuable tool for further genetic studies of honey bees.
Secondly, we evaluated elastic-net regression and demonstrated that it outperforms single-marker association tests. Combined with WES, it was capable of discovering variants associated with complex traits. To our knowledge, this is the first time that either WES or elastic-nets have been used in the honey bee.
In our approach, we specifically chose to sequence drones derived from one colony for two main reasons. By sequencing equally related bees, the problem of spurious associations due to population stratification was avoided. In addition, while SMR has been reported to have developed naturally in several populations, the underlying mechanism is not entirely the same in every population10. As such, there is a high risk that the genetic contributors differ as well, which, in turn, would have reduced the power to detect an association. This is avoided by focusing on one population. A potential downside is that this might lead to a reduced generalizability, i.e. that (at least) some variants associated with the phenotype are unique for that specific population. One option for future studies is thus to redo this experiment by combining drones from different populations.
Also in terms of the population study, we deliberately chose to look for the variants in the Belgian honey bee population. The main reason was a direct evaluation of the potential applicability of the results in that population. Other options that might be pursued in the future are for example looking for the variants in public datasets49,50 and other VR populations to investigate how widespread these mutations are.
With respect to the phenotype, the present study describes a very promising trait, i.e. DBR, in an already well-studied resilient honey bee population that was established in the Amsterdam Water Dunes in the Netherlands by natural selection20. V. destructor has a strong preference for drone brood51, making drone brood removal or drone brood ‘cutting’ a common intervention in beekeeping practice and part of a biotechnical V. destructor control strategy. As the post-capping developmental stage of drones lasts two days longer than for worker bees (14 days instead of 12 days), more mature V. destructor-mites emerge from a drone brood cell. The Cape honey bee (A. m. capensis) has an innate resistance against the V. destructor-mite by shortening the post-capping developmental time to only 9 days on average52. The failure of mite reproduction in the DBR phenotype has a similar effect on the V. destructor population dynamics, and thus is an alternative way to get resistance against the mite by avoiding massive mite reproduction in the male brood. Moreover, the costs of this trait for the colony is relatively low when compared to hygienic behaviour, where up to 32.4% of the pupae are removed from the brood53. As the identified variants associated with DBR were widespread in the natural bee population, we believe the road to marker assisted selection is open.
Material and Methods
Honey bee populations and crossing
Virgin queens from honey bee stocks selected for VR originated from different locations in Europe. From Belgium, we also took virgin sister queens from breeding queen with code 57-584-11612-2012 from Guido Haagdorens, a participant of the Belgian branch of the Beebreed program (Länderinstitut für Bienenkunde Hohen Neuendorf, Germany). This breeding queen was chosen because it gave the highest recorded Varroa-index for Belgium in 2014. The Beebreed program relies on breeding value estimation and the Varroa-index combines measurements of the V. destructor population dynamics and hygienic behaviour8. It requires estimations of the daily mite-fall in spring, the size of the phoretic mite population by the powdered sugar method in summer and the clearance of dead pupae by the pin-test54.
Six virgin queens of each honey bee stock were crossed twice with local VS drones. In the parental generation, we performed artificial insemination at a queen age of 9–10 days under CO2 treatment (this treatment was also given 1 day earlier for 6 min). For each insemination fresh semen was taken from another drone from the same colony (code EXP10) and injected in the queen’s main oviduct (1.5 µl semen + 0.5 µl dilution buffer; dilution buffer contained 0.2 M NaCl, 5 mM glucose monohydrate, 0.67 mM L-lysine, 0.57 mM L-arginine, 0.68 mM L-glutaminic acid, 0.02 M Trisma HCl, 0.03 M Trisma base and 2.5 mg/ml dihydrostreptomycine). Ten to twelve days after introducing the queens in 3-frame hives, we checked for oviposition and nine days later for brood capping. At that moment and when insemination was proven to be successful, we started queen rearing.
From each genetic stock only one colony was chosen for queen rearing. At least four one-day-old larvae from each colony were grafted to artificial queen cells and then transferred to a cell building colony. Once the queen cells were sealed they were transferred to an incubator. The emerging queens were introduced in small mating nuclei colonies, that were treated with oxalic acid (V. destructor-treatment) prior to queen introduction. In this first filial generation virgin queens were allowed to mate naturally. Again we checked for oviposition and cell capping. A second mite treament was done just before winter.
In spring, all colonies were moved to the same apiary (campus Sterre) in order to do the testing in the same environment. Drone brood frames were introduced in two colonies per genetic stock. However, only one colony was used for determination of the phenotype.
Determination of the phenotype
When drone brood cells were capped, the frames were transferred to an incubator and kept at 34 °C. By doing so, we could avoid that our measurements were influenced by hygienic behaviour of the adult bees. Ten days later the drone brood and the V. destructor-mites were killed by freezing. This simplifies the determination of the phenotype as mites will no more escape when drone brood cells are opened. We examined drone brood cells for the presence of a mother mite only (non-reproducing) or a mother mite with her progeny (reproducing) in the presence of red-eyed drone pupae. Both drone pupae and mother mites were stored at −80 °C for subsequent WES and V. destructor genotyping of selected samples, respectively. A Fisher exact test was used to compare the frequency of the VR and the VS drones in the colonies derived from the VR populations relative to the local VS control population. Significance was set at α ≤ 0.05/4 (Bonferroni correction for multiple testing). This was performed in R v3.4.2 (“Short Summer”).
Varroa destructor-mite genotyping
Fifty-six V. destructor specimens were genotyped with 13 microsatellite loci which already have proven to give reliable signals23 (Table S2). Ten loci were originally developed for V. destructor: seven loci (VD146, VD163, VD001, VD151, VD015, VD112 and VD114) by Cornman et al.55, and three loci (VD305, VD306 and VD307) by Solignac et al.56. The final 3 loci (VJ275, VJ294, and VJ292) were developed for V. jacobsoni57.
Individual DNA was obtained from whole V. destructor mites following a Chelex (InstaGene Matrix, BioRad) DNA extraction method as described in Maebe et al.58. In short, 200 µl Chelex and 10 µl proteinase K was added to an individual mite (sliced with a sterile blade) and incubated for 2 h at 56 °C. After a second incubation step of 15 min at 96 °C, the supernatants of 180 µl (DNA) was frozen in −20 °C until further use.
By multiplex PCR, these 13 microsatellites were amplified by HotstarTAq DNA Polymerase (QIAgen, Belgium) in a total volume of 10 µl. The PCR mix consisted out of 1 µl template DNA, PCR buffer (1x), 0.2 µM dNTP’s, 0.1 µM forward primer, 0.5 µM reverse primer, 0.5 µM different labelled forward M13 primers and 1 unit Taq polymerase. Fluorescent labelling of the PCR products was done using a tailed-primer approach59. In this approach a universal M13-primer (=‘tail’, 5′-GAGTTTTCCCAGTCACGAC-3′) was coupled to a VIC, 6-FAM, PET or NED fluorescent label (Table S2). To allow the incorporation of the tail during PCR, the same sequence as the tail was built-in at the 5′-end of all forward primers (see also60). Furthermore, the normal annealing temperature of 60 °C was decreased with 2 °C to 58 °C. The other PCR conditions were: a first denaturation step at 95 °C for 15 min, then 30 cycles of 30 s denaturation at 95 °C, 30 s annealing at 58 °C and 30 s extension at 72 °C, followed by a final extension step of 10 min at 72 °C. Visualization of the PCR products was done by capillary electrophoreses on an ABI3730xl sequencer (Applied Biosystems) with help of a 500 LIZ standard (Genescan, Applied Biosystems). The fragments were scored manually with the Peak Scanner v1.0 software (Applied Biosystems). As a quality control, the amplification of 16 randomly chosen samples was repeated.
For the mites originating from the same beehive, several genetic parameters were determined with the program GenAlEx 6.561 including: Nei’s unbiased expected heterozygosity (HE), the observed heterozygosity (HO) and the effective number of alleles (Ne) as parameters of genetic diversity, and also the inbreeding coefficient (Fis). Paired t-tests were performed over all loci to search for differences between reproducing and non-reproducing mites within a colony, while possible differences over all colonies between reproducing and non-reproducing mites were tested with independent t-tests. These tests were performed in SPSS.
Hence, the software Structure v2.3.362 was used to perform a Bayesian approach to determine the number of populations (or groups) within the dataset. In this analysis, the number of populations (K) was estimated from 1 to 8, and this was repeated 9 times. Each K-value was calculated with a burn in of 1,000,000 iterations and 500,000 MCMC data collecting steps. Hence, the free online program Structure Harvester v0.6.9363, was used to determine the best value of K, and the program Distruct v1.1 software was used for graphical visualization of the population structure.
Development of exome design
The reference genome (Amel_4.5_scaffolds.fa) and corresponding annotation (amel_OGSv3.2.gff3.gz) were obtained from the Hymenoptera Genome Database64. A bed file containing all the exons (including the UTRs) was created with the bedr (v1.0.4) and seqinr (v3.4–5) R-packages. Our design was processed by the Roche Nimblegen custom design group (Madison, USA). Using an SSAHA algorithm, capturing baits were developed based on our design and the reference genome. Design settings for the baits allowed five or fewer single-base insertions, deletions or substitutions between the baits and the genome. Each bait itself was allowed to match up to 20 locations in the genome. Regions under 100 bp were padded to 100 bp to increase capturing efficiency. After approval, the baits were generated and provided as SeqCap Developer Library.
Sixty-four pupae (32 coming from a drone brood cell with a non-reproducing mite; 32 with a reproducing mite), all derived from one colony, were subsequently used for DNA extraction. Each pupae was individually homogenized in a total of 1 ml RLTPlus buffer by mechanical agitation in a TissueLyser for 90 s at 30 Hz, in the presence of 4 metal beads and glass beads. One third of the sample was used to isolate DNA and RNA with the ALLPREP DNA/RNA isolation kit from Qiagen following the manufacturers recommendations. The RNA was eluated in 100 µl RNAse free water while the DNA was eluated in 80 µl EB buffer.
Sample preparation and sequencing
Following DNA extraction, a picogreen assay was performed and 1 μg of every sample was subsequently treated with RNase I (ThermoFisher Scientific). The DNA was next fragmented on a Covaris S2 System in a 130 μl volume (aim: 300 bp fragments, settings: duty cycle: 10%, intensity: 4, cycles per burst: 200, time: 80 s). Depending on the yield after DNA-extraction, between 500 ng and 1 μg of the fragmented DNA was used as input for the library preparation. Samples were end repaired, A-tailed and ligated with TruSeq adapters using the reagents from the KAPA library prep kit according to the manufacturer’s protocol. Size selection was performed on a 2% E-Gel (Invitrogen Life Technologies) (G4010-02), fragments were selected with an insert size around 200–700 bp. Thereafter, the pre-capture LM-PCR was performed on the samples for 8 cycles as prescribed in the SeqCap EZ library protocol. The concentration of each PCR product was determined using Quant-iT™ PicoGreen™ dsDNA Assay Kit (Life Technologies). Sixteen times four samples were equimolarly pooled to obtain a total DNA input of 1250 ng. The pooled library was hybridized for 19 hours and 30 minutes with the baits (SeqCap Developer Library). The hybridized library was washed and the captured and pooled DNA was recovered. After a final amplification (LM-PCR, 13 cycles), the quality of the library was checked using the High Sensitivity DNA chip (Agilent). To check the fold enrichment after capturing, a qPCR is performed as a quality control step before sequencing. The used primers are shown in Table S6. An additional qPCR was performed to determine the quantity of the library to ensure optimal cluster densities. Two times twenty-four samples and one time sixteen samples were sequenced per lane on the NextSeq 500 PE 75 bp.
The reads were aligned to the reference genome (Amel_4.5) using BWA v0.7.1565. Duplicate reads were marked with Picard tools v2.1.1. Using the GATK v3.8-0, variants were called according to the GATK Best Practices66.
From the total list of putative variants, only those were retained that 1/passed the “hard” quality filter suggested from the GATK Best Practices, 2/that had at least 2 different alleles segregating in the population, 3/fell within the target regions and 4/with a call rate of 99%. Filtering was performed with VCFtools v0.1.14 and custom R-scripts67. Retrieval of the gene function was done by BLAST searching.
Single-marker tests and elastic-net penalized regression
For the single marker tests, a Fisher exact test was conducted for each variant. The Bonferroni correction for multiple testing was applied. Elastic-nets penalized regression was next performed with the glmnet v2.0–12 R-package in R v3.4.2 (“Short Summer”)27. For the model selection, potential parameters were the 140,151 variants and no covariates were added. To obtain the optimal lambda (i.e. the penalty) and alpha (i.e. the balance between more “lasso”-like and “ridge”-regression like behaviour), a leave-one-out cross-validation was performed for alpha ranging from 0 to 1 (in steps of 0.1). Lambda was set at the stringent MSE+1SE threshold28.
Allelic frequency analysis in the Belgian honey bee population
Worker bees were sampled at the apiaries from breeders involved in the Flemish beekeeping program. Thirty breeders sampled only a single colony; two others sampled four and twelve colonies, respectively. The apiaries are distributed throughout Flanders, the northern part of Belgium. Two individual worker bees from 46 different colonies were sampled from different apiaries. Each single bee was homogenized in 0.5 ml of 100 mM NaCl; 20 mM Tris-HCl, pH 8; 25 mM EDTA, pH 8; 0.5% SDS by mechanical agitation in a TissueLyser for 90 s at 30 Hz, in the presence of metal beads and glass beads. After homogenization 20 µl/ml Proteinase K (20 mg/ml) was added and incubated for 1 hour at 37 °C. First, an equal volume of phenol:chloroform was added and centrifuged at 12,000 g for 10 min at 4 °C. The supernatant was then extracted with an equal volume of chloroform:isoamyl alcohol (24:1) and centrifuged at 12,000 g for 10 min at 4 °C. The DNA was precipitated using two volumes of ethanol and centrifuged at 12,000 g for 30 min at 4 °C. The precipitated DNA was finally washed with 0.5 ml 70% ethanol. The DNA was dissolved in 100 µl DNase/RNase free water.
Primer pairs were designed with Primer-BLAST68. Primers were chosen in regions that were free of secondary structures (Mfold) and are listed in Table S769. PCR amplicons were analyzed via agarose gel electrophoresis. Sequencing reactions were performed using the BigDye Terminator v3.1 Cycle Sequencing Kit (Applied Biosystems, Foster City, CA, USA) with the individual PCR primers as sequencing primers and run at Eurofins Genomics (Ebersberg, Germany). Sequence analysis was performed with BioEdit v7.2.6.
The allele frequency was determined at the colony level, followed by a comparison of the average allele frequency for risk and protective alleles and an evaluation of the correlation between the effect size and the allele frequency (Spearman correlation).
All the data is available upon request.
Rosenkranz, P., Aumeier, P. & Ziegelmann, B. Biology and control of Varroa destructor. J. Invertebr. Pathol. 103, S96–S119 (2010).
Kruitwagen, A., van Langevelde, F., van Dooremalen, C. & Blacquière, T. Naturally selected honey bee (Apis mellifera) colonies resistant to Varroa destructor do not groom more intensively. J. Apic. Res. 56, 354–365 (2017).
De Jong, D. & Soares, A. E. E. An isolated population of Italian bees that has survived Varroa jacobsoni infestation without treatment for over 12 years. Am Bee J 137, 742–745 (1997).
Le Conte, Y. L. et al. Honey bee colonies that have survived Varroa destructor. Apidologie 38, 566–572 (2007).
Fries, I., Imdorf, A. & Rosenkranz, P. Survival of mite infested (Varroa destructor) honey bee (Apis mellifera) colonies in a Nordic climate. Apidologie 37, 564–570 (2006).
Büchler, R. Varroa tolerance in honey bees - Occurrence, characters and breeding. Bee World 75, 54–70 (1994).
Harbo, J. R. & Hoopingarner, R. A. Honey bees (Hymenoptera: Apidae) in the United States that express resistance to Varroa jacobsoni (Mesostigmata: Varroidae). J. Econ. Entomol. 90, 893–898 (1997).
Bienefeld, K. Breeding Success or Genetic Diversity in Honey Bees? Bee World 93, 40–44 (2016).
Kurze, C., Routtu, J. & Moritz, R. F. A. Parasite resistance and tolerance in honeybees at the individual and social level. Zoology 119, 290–297 (2016).
Locke, B., Le Conte, Y., Crauser, D. & Fries, I. Host adaptations reduce the reproductive success of varroa destructor in two distinct european honey bee populations. Ecol. Evol. 2, 1144–1150 (2012).
Zakar, E., Jávor, A. & Kusza, S. Genetic bases of tolerance to Varroa destructor in honey bees (Apis mellifera L.). Insectes Soc. 61, 207–215 (2014).
Lewis, C. M. Genetic association studies: design, analysis and interpretation. Brief. Bioinform. 3, 146–153 (2002).
Price, A. L., Zaitlen, N. A., Reich, D. & Patterson, N. New approaches to population stratification in genome-wide association studies. Nat. Rev. Genet. 11, 459–63 (2010).
Lattorff, H. M. G., Buchholz, J., Fries, I. & Moritz, R. F. A. A selective sweep in a Varroa destructor resistant honeybee (Apis mellifera) population. Infect. Genet. Evol. 31, 169–176 (2015).
Behrens, D. et al. Three QTL in the honey bee Apis mellifera L. suppress reproduction of the parasitic mite Varroa destructor. Ecol. Evol. 1, 451–458 (2011).
Conlon, B. H. et al. The role of epistatic interactions underpinning resistance to parasitic Varroa mites in haploid honey bee (Apis mellifera) drones. J. Evol. Biol. 31, 801–809 (2018).
Broeckx, B. J. G. et al. An exome sequencing based approach for genome-wide association studies in the dog. Sci. Rep. 7, 15680 (2017).
Broeckx, B. J. G. et al. Development and performance of a targeted whole exome sequencing enrichment kit for the dog (Canis Familiaris Build 3.1). Sci. Rep. 4, 5597 (2014).
Broeckx, B. J. G. et al. Improved canine exome designs, featuring ncRNAs and increased coverage of protein coding genes. Sci. Rep. 5, 12810 (2015).
Panziera, D., van Langevelde, F. & Blacquière, T. Varroa sensitive hygiene contributes to naturally selected varroa resistance in honey bees. J. Apic. Res. 56, 635–642 (2017).
Kefuss, J., Vanpoucke, J., Bolt, M. & Kefuss, C. Selection for resistance to Varroa destructor under commercial beekeeping conditions. J. Apic. Res. 54, 563–576 (2015).
Oddie, M. A. Y., Dahle, B. & Neumann, P. Norwegian honey bees surviving Varroa destructor mite infestations by means of natural selection. PeerJ 5, e3956 (2017).
Roberts, J. M. K., Anderson, D. L. & Tay, W. T. Multiple host shifts by the emerging honeybee parasite, Varroa jacobsoni. Mol. Ecol. 24, 2379–2391 (2015).
Evanno, G., Regnaut, S. & Goudet, J. Detecting the number of clusters of individuals using the software STRUCTURE: A simulation study. Mol. Ecol. 14, 2611–2620 (2005).
Elsik, C. G. et al. Finding the missing honey bee genes: Lessons learned from a genome upgrade. BMC Genomics 15, 1–29 (2014).
Wu, T. T., Chen, Y. F., Hastie, T., Sobel, E. & Lange, K. Genome-wide association analysis by lasso penalized logistic regression. Bioinformatics 25, 714–721 (2009).
Friedman, J., Hastie, T. & Tibshirani, R. Regularization Paths for Generalized Linear Models via Coordinate Descent. J. Stat. Softw. 33 (2010).
Waldmann, P., Mészáros, G., Gredler, B., Fuerst, C. & Sölkner, J. Evaluation of the lasso and the elastic net in genome-wide association studies. Front. Genet. 4, 1–11 (2013).
Arbet, J., McGue, M., Chatterjee, S. & Basu, S. Resampling-based tests for Lasso in genome-wide association studies. BMC Genet. 18, 1–15 (2017).
Fan, J. & Lv, J. A Selective Overview of Variable Selection in High Dimensional Feature Space. Stat. Sin. 20, 101–148 (2010).
Manolio, T. A. et al. Finding the missing heritability of complex diseases. Nature 461, 747–53 (2009).
Brule, C. E. & Grayhack, E. J. Synonymous Codons: Choose Wisely for Expression. Trends Genet. 33, 283–297 (2017).
Fu, J. et al. Codon usage affects the structure and function of the Drosophila circadian clock protein PERIOD. Genes Dev. 1761–1775 (2016).
McCarthy, C., Carrea, A. & Diambra, L. Bicodon bias can determine the role of synonymous SNPs in human diseases. BMC Genomics 18, 1–11 (2017).
Roberts, A. J. Emerging mechanisms of dynein transport in the cytoplasm versus the cilium. Biochem. Soc. Trans. 46, 967–982 (2018).
Han, Y.-G., Kwok, B. H. & Kernan, M. J. Intraflaggelar Transport Is Required in Drosophila to Differentiate Sensory Cilia but Not Sperm. Curr. Biol. 13, 1679–1686 (2003).
Mencarelli, C., Lupetti, P. & Dallai, R. New insights into the cell biology of insect axonemes. Int. Rev. Cell Mol. Biol. 268, 95–145 (2008).
Le Conte, Y., Arnold, G., Trouiller, J., Masson, C. & Chappe, B. Identification of a brood pheromone in honeybees. Naturwissenschaften 77, 334–336 (1990).
Sharma, K. R. et al. Cuticular Hydrocarbon Pheromones for Social Behavior and Their Coding in the Ant Antenna. Cell Rep. 12, 1261–1271 (2015).
Garrido, C. & Rosenkranz, P. Volatiles of the honey bee larva initiate oogenesis in the parasitic mite Varroa destructor. Chemoecology 14, 193–197 (2004).
Frey, E., Odemer, R., Blum, T. & Rosenkranz, P. Activation and interruption of the reproduction of Varroa destructor is triggered by host signals (Apis mellifera). J. Invertebr. Pathol. 113, 56–62 (2013).
Halestrap, A. Monocarboxylic acid transport. Compr Physiol 3, 1611–1643 (2013).
Navajas, M. et al. Differential gene expression of the honey bee Apis mellifera associated with Varroa destructor infection. BMC Genomics 9, 1–11 (2008).
Mondet, F. et al. Antennae hold a key to Varroa-sensitive hygiene behaviour in honey bees. Sci. Rep. 5, 10454 (2015).
Scannapieco, A. C. et al. Expression analysis of genes putatively associated with hygienic behavior in selected stocks of Apis mellifera L. from Argentina. Insectes Soc. 64, 485–494 (2017).
Hu, H. et al. Proteome analysis of the hemolymph, mushroom body, and antenna provides novel insight into honeybee resistance against varroa infestation. J. Proteome Res. 15, 2841–2854 (2016).
Stolle, E. & Moritz, R. F. A. RESTseq - Efficient Benchtop Population Genomics with RESTriction Fragment SEQuencing. PLoS One 8, 4–8 (2013).
Spötter, A., Gupta, P., Nürnberg, G., Reinsch, N. & Bienefeld, K. Development of a 44K SNP assay focussing on the analysis of a varroa-specific defence behaviour in honey bees (Apis mellifera carnica). Mol. Ecol. Resour. 12, 323–332 (2012).
Wallberg, A. et al. A worldwide survey of genome sequence variation provides insight into the evolutionary history of the honeybee Apis mellifera. Nat. Genet. 46, 1081–1088 (2014).
Harpur, A. B. A. et al. Integrative Genomics Reveals the Genetics and Evolution of the Honey Bee’s Social Immune System. Genome Biol. Evol. evz018 (2019).
Fuchs, S. Preference for drone brood cells by Varroa jacobsoni Oud in colonies of Apis mellifera carnica. Apidologie 21, 193–199 (1990).
Moritz, R. F. A. & Hänel, H. Restricted development of the parasitic mite Varroa jacobsoni Oud. in the Cape honey bee Apis mellifera capensis Esch. 1. J. Appl. Entomol. 97, 91–95 (1984).
Boecking, O., Bienefeld, K. & Drescher, W. Heritability of the Varroa-specific hygienic behaviour in honey bees (Hymenoptera: Apidae). J. Anim. Breed. Genet. 117, 417–424 (2000).
Büchler, R. et al. Standard methods for rearing and selection of Apis mellifera queens Standard methods for rearing and selection of Apis mellifera queens. J. Apic. Res. 52, 1–30 (2015).
Cornman, S. R. et al. Genomic survey of the ectoparasitic mite Varroa destructor, a major pest of the honey bee Apis mellifera. BMC Genomics 11, 602 (2010).
Solignac, M. et al. Characterization of microsatellite markers for the apicultural pest Varroa destructor (Acari: Varroidae) and its relatives. Mol. Ecol. Notes 3, 556–559 (2003).
Evans, J. D. Microsatellite loci in the honey bee parasitic mite Varroa jacobsoni. Mol. Ecol. 9, 1436–1438 (2000).
Maebe, K. et al. Microsatellite analysis of museum specimens reveals historical differences in genetic diversity between declining and more stable Bombus species. PLoS One 10, 1–15 (2015).
Schuelke, M. An economic method for the fluorescent labeling of PCR fragments. Nat. Biotechnol. 18, 233–234 (2000).
Maebe, K., Meeus, I., De Riek, J. & Smagghe, G. Quantitative trait loci for light sensitivity, body weight, body size, and morphological eye parameters in the bumblebee, Bombus terrestris. PLoS One 10, 1–21 (2015).
Peakall, R. & Smouse, P. E. GenALEx 6.5: Genetic analysis in Excel. Population genetic software for teaching and research-an update. Bioinformatics 28, 2537–2539 (2012).
Pritchard, J. K., Stephens, M. & Donnelly, P. Inference of Population Structure Using Multilocus Genotype Data. Genetics 155, 945–959 (2000).
Earl, D. A. & vonHoldt, B. M. STRUCTURE HARVESTER: A website and program for visualizing STRUCTURE output and implementing the Evanno method. Conserv. Genet. Resour. 4, 359–361 (2012).
Elsik, C. G. et al. Hymenoptera Genome Database: Integrating genome annotations in HymenopteraMine. Nucleic Acids Res. 44, D793–D800 (2016).
Li, H. & Durbin, R. Fast and accurate long-read alignment with Burrows-Wheeler transform. Bioinformatics 26, 589–595 (2010).
Van der Auwera, G. A. et al. From FastQ Data to High-Confidence Variant Calls: The Genome Analysis Toolkit Best Practices Pipeline. Curr. Protoc. Bioinforma. 43, 11.10.1–11.10.33 (2013).
Danecek, P. et al. The variant call format and VCFtools. Bioinformatics 27, 2156–2158 (2011).
Ye, J. et al. Primer-BLAST: A tool to design target-specific primers for polymerase chain reaction. BMC Bioinformatics 13, 134 (2012).
Zuker, M. Mfold web server for nucleic acid folding and hybridization prediction. Nucleic Acids Res. 31, 3406–3415 (2003).
This work was supported by FOD Volksgezondheid, Veiligheid van de Voedselketen en Leefmilieu (Cel Contractueel Onderzoek) RT13/4. The computational resources (Stevin Supercomputer Infrastructure) used for the analysis of the WES data were provided by the VSC (Flemish Supercomputer Center), funded by Ghent University, FWO and the Flemish Government – department EWI. We would like to thank Sarah De Keulenaer, Ellen De Meester and Sylvie Decraene from NXT GNT (http://www.nxtgnt.com/) for performing the library preparation and sequencing, Dominique Vander Donckt and Linda Impe for performing the PCR and Sanger sequencing in the population study, Ruben Van Gansbeke for the administrative support, Marleen Brunain for DBR phenotyping and all beekeepers who participated in this study, especially Guido Haagdorens. DCdG and his team are grateful for the availability of locations for experimental apiaries offered by the municipality of Merelbeke and the faculties of Sciences, Veterinary Medicine, Economics and Business Administration, and Arts and Philosophy of Ghent University.
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Broeckx, B.J.G., De Smet, L., Blacquière, T. et al. Honey bee predisposition of resistance to ubiquitous mite infestations. Sci Rep 9, 7794 (2019). https://doi.org/10.1038/s41598-019-44254-8
This article is cited by
A genotyping by sequencing approach can disclose Apis mellifera population genomic information contained in honey environmental DNA
Scientific Reports (2022)
qPCR assays with dual-labeled probes for genotyping honey bee variants associated with varroa resistance
BMC Veterinary Research (2021)
Natural selection, selective breeding, and the evolution of resistance of honeybees (Apis mellifera) against Varroa
Zoological Letters (2020)