Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

# Deep Neural Network Inverse Design of Integrated Photonic Power Splitters

## Abstract

Predicting physical response of an artificially structured material is of particular interest for scientific and engineering applications. Here we use deep learning to predict optical response of artificially engineered nanophotonic devices. In addition to predicting forward approximation of transmission response for any given topology, this approach allows us to inversely approximate designs for a targeted optical response. Our Deep Neural Network (DNN) could design compact (2.6 × 2.6 μm2) silicon-on-insulator (SOI)-based 1 × 2 power splitters with various target splitting ratios in a fraction of a second. This model is trained to minimize the reflection (to smaller than ~ −20 dB) while achieving maximum transmission efficiency above 90% and target splitting specifications. This approach paves the way for rapid design of integrated photonic components relying on complex nanostructures.

## Introduction

Artificially engineered subwavelength nanostructured materials can be used to control incident electromagnetic fields into specific transmitted and reflected wavefronts. Recent nanophotonic devices have used such complex structures to enable novel applications in optics, integrated photonics, sensing, and computational metamaterials in a compact and energy-efficient form1,2,3,4,5,6,7,8,9,10. Nevertheless, optimization of nanostructures, with enormous number of possible combination of features, using numerical simulation is computationally costly. For example, computing electromagnetic field profile via finite-difference time-domain (FDTD) methods may require long simulation time, several minutes to hours depending on the volume of the photonic device, for analyzing the optical transmission response. In order to design nanostructures achieving target transmission profile, we need to perform a large number of FDTD simulations in most meta-heuristic approaches. To resolve the issue, we previously developed an artificial intelligence integrated optimization process using neural networks (NN) that can accelerate optimization by reducing required number of numerical simulations to demonstrate how NNs can help to streamline the design process11,12.

Deep learning methods are representation-learning techniques obtained by composition of non-linear models that transform the representation at the previous level into a higher and slightly more abstract level in a hierarchical manner13. The main idea is that by cascading a large number of such transformations, very complex functions can be learnt in a data-driven fashion using deep neural networks14. The huge success of deep learning in modeling complex input-output relationship has attracted attention from several scientific communities such as material discovery15, high energy physics16, single molecule imaging medical diagnosis17, and particle physics18. It has received some attention in optical community and there has been several recent work on reverse modeling for design of nano-structured optical components using DNN19,20,21,22,23,24,25, as well as hardware implementation of an artificial neural network26,27,28,29,30. NNs can be used to predict the optical response of a topology (Forward Design) as well as to design a topology for a target optical response (Inverse Design).

Inverse design of photonic structures were conventionally demonstrated using adjoint sensitivity analysis31,32,33,34. More recently, D. Liu used a tandem NN architecture to learn non-unique electromagnetic scattering of alternating dielectric thin films with varying thickness21. J. Peurifoy demonstrated NNs to approximate light scattering of multilayer shell nanoparticles of SiO2 and TiO2 using a fully connected NNs with a depth of 4 layers24. During preparation of this paper, T. Asano provided a neural network for prediction of the quality factors in two dimensional photonic crystals26. Inspired by this progress, we aim to train a NN that can instantaneously design an integrated photonic power divider with a ratio specified by the user. The design space for integrated photonic devices is considerably larger than previously demonstrated optical scattering applications that call for robust deeper networks such as Deep Residual Networks (ResNet)35.

Integrated photonic beam splitters based on a multimode interference (MMI) have been widely used to equally divide the power into the output ports. Although an arbitrary split ratio can be applied in various applications such as signal monitoring, feedback circuits, or optical quantization36, the design space is hardly explored due to design complexity. Tian et al. demonstrated SOI-based couplers with variable splitting ratio in a 15 × 15 μm2 device footprint with 60 nm bandwidth and 80% transmission efficiency37. Xu et al. optimized positioning of squared etched pixels to achieve 80% efficiency for arbitrary ratio power dividers in 3.6 × 3.6 μm2 device foot print38.

To design photonic power divider with arbitrary splitting ratio, the designer often begins with an overall structure based on analytical models and fine tune the structure using parameter sweep in numerical simulations. Here, we demonstrate that using deep learning methods we could efficiently learn the design space of a broadband integrated photonic power divider in a compact deep residual neural network model. This method allows design by specifications, where user simply asks for a specific power splitting performance and can see the near ideal solution almost instantaneously without depending on time-consuming FDTD simulations. Our device has above 90% transmission efficiency in a footprint of 2.6 × 2.6 μm2, which to the best of our knowledge, is the smallest arbitrary ratio beam splitter to date. Moreover, our design does not rely on arbitrary device morphologies and is constrained to a 20 × 20 vector of etched holes with a radius of 45 nm, conveniently fabricable by the current semiconductor technology.

## Deep Learning for Forward Modeling to Predict Optical Response

### Simulation Setting and Dataset

When a broadband light encounters an obstacle with a different refractive index, along its path, it undergoes reflection, refraction, and scattering. The goal of the nanostructured integrated photonics power splitter is to organize the optical interaction events, such that the overall effect of the ensemble of scattering evets guides the beam to a target port and power intensity. To design the power ratio splitter using DNN we chose a simple three port structure on a standard fully etched SOI platform. One input and two outputs 0.5 μm wide port are connected using an adiabatic taper to the 2.6 μm wide square power splitter design region with a connection width of 1.3 μm (Fig. 1). We use numerical simulation (Methods section) to generate labeled data for training the network. We then feed the DNN with numerical optical experiments and train a neural network able to represent the relationship between hole vectors and spectral response at each port. Initially our input data are several 20 × 20 hole vectors (HV), each labeled by its spectral transmission response (SPEC) at port 1 (T1) and port 2 (T2) and reflection from the input port (R). Each pixel is a circle with a radius of 45 nm that is easily fabricable using conventional lithography methods32,39. Each pixel can have a binary state of 1 for etched (n = nsilicon) and 0 for not etched (n = nsilica) (See Methods). Changing the refractive index at a hole position modifies the local effective index inside of the power divider to determine the propagation path for the travelling wave in the device.

We use randomly chosen HVs and carefully chosen patterned initial HVs (see Fig. 2a and Supplementary Fig. S1), and optimize spectral transmission values using heuristic optimization approaches for various optimization metrics to collect a diverse set of labeled training data for supervised learning. In the case of a symmetric search, we enforce symmetry of HV across the X axis and take advantage of the symmetry of the topology to reduce the search space from 400 pixels to 200. In addition, this reduces the simulation time to half because of the symmetric boundary condition. Therefore, the spectral response T1 and T2 are equal for symmetric devices (Fig. 2b). The input and output waveguide and other geometrical details of symmetric and asymmetric cases are identical. For both cases shown in Fig. 2, we start the optimization with an initial hole vector and use a single stride binary search to maximize $${\rm{FOM}}=\,{\rm{\min }}({T}_{1})+\,\min ({T}_{2})-\alpha \times \,{\rm{\max }}(|R|)$$ for α = 2 and 4 for Fig. 2a and b, respectively. Our design goal is to achieve compact nanostructured power splitters with high transmission efficiency and minimized back reflection. Low back reflection is of great importance since in active integrated photonic circuits, it is important to minimize the back reflection. That is why we use reflection factors larger than 2 in our optimization metrics to emphasize minimizing back reflection in these power splitters. We repeat this process for ~ 20 different initial conditions and splitting ratio targets and add mirrored data for asymmetric cases to collect a total of ~ 20,000 data with their corresponding spectral labels (Fig. 2c).

For the forward problem, inputs are two-dimensional 20 × 20 HV arrays corresponding to binary images of hole locations. We train a DNN to predict the SPEC vector which is a one dimensional vector with 63 elements. SPEC includes broadband spectral data (1450 to 1650 nm) for transmission at output ports T1 and T2, as well as the reflection to the input port R. For the inverse design, SPEC is used as an input and hole vectors are considered as labels. The forward problem is solved as a regression problem and we use a Gaussian log-likelihood function to train the model. In contrast, the inverse problem is solved as a classification problem, where we predict the binary vectors that represent the hole locations. Therefore, we use a Bernoulli log-likelihood classifier as the loss function for training the inverse problem. The Gaussian log-likelihood loss function is represented by the following equation.

$$-\mathrm{log}\,P(Y|X,{\boldsymbol{W}})=\frac{1}{K}\sum _{n}^{K}(\frac{1}{2}\,\mathrm{log}(2\pi {\sigma }^{2})+\frac{1}{2{\sigma }^{2}}{({y}_{n}-{{\boldsymbol{W}}}^{T}{x}_{n})}^{2}),$$
(1)

where P(Y|X,W) denotes the probabilistic model, W denotes the model parameters, K is the number of training data. The loss function is optimized using the Adam optimization algorithm40. Training is terminated after a fixed number of iterations to ensure convergence (Fig. 2d). The training and validation results were similar for our trained networks and thus we didn’t use any regularization for over-fitting.

For both the problems, we first used a fully-connected DNN (FCDNN) with multiple layers where each layer has 100 neurons. The number of layers was considered as a hyperparameter which was optimized during the numerical experiments. However, we found that increasing the depth of the FCDNNs didn’t improve the performance of the network. Consequently, we used a residual deep neural network (ResNet) to improve the depth of training up to 8 hidden layers for both the forward and inverse problem (see Fig. 2d for a quantitative comparison between regular DNNs and ResNets). To explain, FCDNNs generally suffer from the problem of vanishing gradients. As a result, increasing depth of a FCDNN doesn’t necessarily improve the performance. The ResNet is designed to circumvent this problem by using “identity shortcut connections” with the underlying hypothesis that it is easier to optimize the residual mapping than to optimize the original, unreferenced mapping (Fig. 3). ResNets have empirically been proven to allow more flexibility in training deep architectures than the FCDNN35. The main idea is that the ResNet uses an additional identity function to allow smooth forward and backward propagation of gradients.

## Results

To test the nanostructured power divider network, first we use a randomly selected, unseen 20% data from the same set of simulation data used to train the network. The test data set helps to prevent overfitting the model to the training data (Fig. 2d).

In the following we present the outcome of the network for forward prediction of spectra from HV (Fig. 4), and inversely designing the HV from a given physically feasible SPEC specifications (Fig. 5). First we test the forward computation of the network to see prediction of spectral response of a topology that the network is not trained on. Interestingly, the network could predict transmission and reflection spectra quite accurately (Figs 4 and 5).

To quantify the prediction accuracy we use a correlation plot that compares true numerically verified optical response with DNN predictions. The correlation coefficient of the DNN prediction was above 99% (Fig. 5). We use the variance of the negative log likelihood cost function as a means to determine the confidence of the neural network and show it as the area of the prediction uncertainty in the correlation plot. We observe that confidence of the prediction is lower in lower transmission regime and improves at higher transmission regimes. This is expected since the training data mainly contains high transmission devices (Fig. 2d).

We test the inverse modeling on the same data as above by using SPECs as data and HVs as label and reversing and optimizing the inverse network. To test the generalization capabilities of the network, we investigate the network’s inverse design performance on arbitrary and unfamiliar cases. To do this, we generate a reference table containing broadband constant transmission values for each port and use them as the input data batch for the Inverse Design DNN model. The predicted HVs can take any value from 0 to 1 from a Bernoulli distribution classifier. The classification converges to 0 or 1 as the loss reduces by increasing the number of training epochs. The produced quantized binary sequences contain features that the model is not trained on (Supplementary Fig. 2), which are then fed back into the numerical solver to evaluate the prediction performance. In a next step, we run independent FDTD simulation to check validity of the response (Fig. 6). Numerically simulated electric field propagation at center wavelength of 1550 nm for 8 splitting ratios of 1:1, 1:1.05, 1:1.5, 1:1.55, 1:2, 1:2.5, 1:3, and 1:3.5 show various power splitting mechanisms from classical MMI based beam splitters. The electric field distribution intensity in the case of 1:1 and 1:05 splitting are almost symmetric. On the other hand the electric field intensity is asymmetric for asymmetric splitting ratio devices (as expected) and beam path is broadened for the side with a larger output T2.

Predicted topologies for target spectral responses for a-b and c-d pairs show different looking patterns for similar spectral response. This makes sense, because there could be several solutions to a single electromagnetic problem. FDTD simulated optical power propagation through predicted power splitter are demonstrated for each pattern. In all of the eight cases shown in Fig. 6 the transmission efficiency exceeds 90% which, to the best of our knowledge, is the highest transmission efficiency demonstrated in integrated power splitters. And this is also the first time minimizing reflection is taken into consideration. Although we did not aim to maximize the operation bandwidth as an objective, our power splitters show broadband transmission between 1450 to 1650 nm. Additionally, we set the reflection target to −20 dB at 1550 nm wavelength. We achieve reflection responses less than −20 dB at 1550 nm, except for the case of Fig. 6c. The main reason for apparently large variations in predicted and actual reflection response shown Fig. 6 is because the spectral response are shown in logarithmic scale. In reality the differences are very small.

## Discussion

NNs can be used to take device structure data (shape, depth, and permittivity) to predict the optical response of the nanostructure (forward network). In this case NN can be used as method for fast approximation of the optical response instead use of computationally heavy numerical methods. Another way to use NNs, which is not available in conventional numerical methods, is taking an optical response as input and providing user with an approximate solution nanostructure (inverse design). Although DNN initially need a large amount of data set for the training purpose, it is possible to process several heuristic optimization metrics in parallel on a computing cluster to speed up generating the training data. Once the network is trained to represent the topology as optical response and vice versa, it can design the nanostructured geometry in a fraction of second.

We utilized a ResNet DNN architecture to use an additional identity function to allow smooth forward and backward propagation of gradients. This allowed us to increase the depth of the network to 8 layers. We observed that there is still some overfitting in the ResNet DNN for 10 × 100 structure (10 layer deep and 100 neuron wide). As the number of parameters learned from data depend on the number of neurons in the DNN, the 10 × 100 has the highest number of parameters learned during training. While this provides good performance during training, it leads to some overfitting of the data. It is possible to include dropout in the DNN to allow for regularization and increasing the hidden layer depth further; however, this is left as a future work.

In conclusion, we have demonstrated application of DNNs in design of nanostructured integrated photonic components. Although the design space for this problem is very large (2400) possible combinations), by training DNN with nearly 20,000 simulation data we trained a network that can approximate the spectral response of an arbitrary hole vector within this design space. In addition, we could use the inverse network to design a nearly optimized power splitter topology for any user specific power splitting ratio. The capability of DNN in predicting optical response of a topology and the inverse design holds promise in wide spread use of these networks in the design of nanostructured photonic systems.

## Methods

### Numerical Simulations

We use Lumerical’s FDTD simulation package to generate the training data. The data contains more than 20,000 numerical simulations, where each experiment is a 3D FDTD simulation composed of passive SOI waveguides and the beam splitter device. Initial random hole position matrix of the beam splitter was generated, exported, and manipulated using the MATLAB automation. Hole position generating script uses different algorithms (such as Direct Binary Search), initial conditions, and optimization metrics to sequentially create sufficiently large data set required for a robust neural network representation of the device structure. It took a desktop computer with a core-i7 CPU with 3.7 GHz clock speed and 64 GB RAM about two weeks to complete collecting the 20,000 simulation data.

Dispersive refractive indices of silicon and silica from literature41 were used for all simulations for a broadband simulation in the range of 1.45–1.65 μm. The fundamental TE mode at 1550 nm was used at input source and TE mode output power was recorded for transmission and reflection. We note that TM mode output is below 10−5.

### Deep Neural Network (DNN)

We use the open source machine learning framework of Tensorflow in python language to build and test our deep neural networks. The runtime to train the neural network model depends on network and training parameters including data size, hidden layer depth and width, batch size, and epoch numbers. The runtime to train the neural network model depends on network and training parameters including data size, hidden layer depth and width, batch size, and epoch numbers. For the representative network parameters, with hidden layer width of 100, hidden layer depth of 8, batch size of 100, epoch number of 10,000, and trained on 20,000 data, shown in Fig. 2d, it take 1337 seconds (~22 minutes) to train the model.

## References

1. 1.

Ni, X., Wong, Z. J., Mrejen, M., Wang, Y. & Zhang, X. An ultrathin invisibility skin cloak for visible light. Science 349, 1310–1314 (2015).

2. 2.

Alù, A. & Engheta, N. Achieving transparency with plasmonic and metamaterial coatings. Phys. Rev. E 72, 016623 (2005).

3. 3.

Monticone, F., Estakhri, N. M. & Alù, A. Full control of nanoscale optical transmission with a composite metascreen. Phys. Rev. Lett. 110, 203903, https://doi.org/10.1103/PhysRevLett.110.203903 (2013).

4. 4.

Arbabi, E., Arbabi, A., Kamali, S. M., Horie, Y. & Faraon, A. Multiwavelength polarization-insensitive lenses based on dielectric metasurfaces with meta-molecules. Optica 3, 628–633 (2016).

5. 5.

Khorasaninejad, M. et al. Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging. Science 352, 1190–1194 (2016).

6. 6.

Krasnok, A., Tymchenko, M. & Alù, A. Nonlinear metasurfaces: a paradigm shift in nonlinear optics. Mater. Today 21, 8–21, https://doi.org/10.1016/j.mattod.2017.06.007 (2018).

7. 7.

Azad, A. K. et al. Metasurface broadband solar absorber. Sci. Reports 6, 20347 (2016).

8. 8.

Lalau-Keraly, C. M., Bhargava, S., Miller, O. D. & Yablonovitch, E. Adjoint shape optimization applied to electromagnetic design. Opt. Express 21, 21693–21701 (2013).

9. 9.

Motayed, A. et al. Highly selective nanostructure sensors and methods of detecting target analytes US Patent 9,983,183 (2018).

10. 10.

Silva, A. et al. Performing mathematical operations with metamaterials. Science 343, 160–163 (2014).

11. 11.

Kojima, K., Wang, B., Kamilov, U., Koike-Akino, T. & Parsons, K. Acceleration of FDTD-based inverse design using a neural network approach. In Integrated Photonics Research, Silicon and Nanophotonics, ITu1A–4 (Optical Society of America, 2017).

12. 12.

Teng, M. et al. Broadband soi mode order converter based on topology optimization. In 2018 Optical Fiber Communications Conference and Exposition (OFC), Th2A.8 (2018).

13. 13.

LeCun, Y., Bengio, Y. & Hinton, G. Deep learning. Nature 521, 436–444 (2015).

14. 14.

Krizhevsky, A., Sutskever, I. & Hinton, G. E. Imagenet classification with deep convolutional neural networks. vol. 60, 84–90, https://doi.org/10.1145/3065386 (ACM, New York, NY, USA, 2017).

15. 15.

Ghaboussi, J., Garrett, J. Jr & Wu, X. Knowledge-based modeling of material behavior with neural networks. J. Eng. Mech. 117, 132–153 (1991).

16. 16.

Baldi, P., Sadowski, P. & Whiteson, D. Searching for exotic particles in high-energy physics with deep learning. Nat. Commun. 5 (2014).

17. 17.

Jun, Y. et al. Deep-learned 3d black-blood imaging using automatic labelling technique and 3d convolutional neural networks for detecting metastatic brain tumors. Sci. Reports 8, 9450 (2018).

18. 18.

Radovic, A. et al. Machine learning at the energy and intensity frontiers of particle physics. Nature 560 (2018).

19. 19.

Liu, D., Tan, Y., Khoram, E. & Yu, Z. Training deep neural networks for the inverse design of nanophotonic structures. ACS Photonics 5, 1365–1369 (2018).

20. 20.

Ma, W., Cheng, F. & Liu, Y. Deep-learning enabled on-demand design of chiral metamaterials. ACS Nano 12, 6326–6334 (2018).

21. 21.

Malkiel, I. et al. Deep learning for the design of nano-photonic structures. In 2018 IEEE International Conference on Computational Photography (ICCP), 1–14, https://doi.org/10.1109/ICCPHOT.2018.8368462 (2018).

22. 22.

Peurifoy, J. et al. Nanophotonic particle simulation and inverse design using artificial neural networks. Sci. Adv. 4, https://doi.org/10.1126/sciadv.aar4206, http://advances.sciencemag.org/content/4/6/eaar4206.full.pdf (2018).

23. 23.

Sun, Y., Xia, Z. & Kamilov, U. S. Efficient and accurate inversion of multiple scattering with deep learning. Opt. Express 26, 14678–14688 (2018).

24. 24.

Liu, Z., Zhu, D., Rodrigues, S., Lee, K. & Cai, W. Generative Model for the Inverse Design of Metasurfaces. Nano Letters 18(10), 6570–6576 (2018).

25. 25.

Asano, T. & Noda, S. Optimization of photonic crystal nanocavities based on deep learning. arXiv preprint arXiv 1808, 05722 (2018).

26. 26.

Shen, Y. et al. M. Deep learning with coherent nanophotonic circuits. Nature Photonics 11(7), 441 (2017).

27. 27.

Tait, A. N. et al. Neuromorphic photonic networks using silicon photonic weight banks. Sci. Reports 7, 7930 (2017).

28. 28.

Moon, G., Zaghloul, M.E. & Newcomb, R.W., VLSI implementation of synaptic weighting and summing in pulse coded neural-type cells. IEEE Transactions on Neural Networks, 3(3), pp.394–403 (1992).

29. 29.

Lin, X. et al. All-optical machine learning using diffractive deep neural networks. Science, https://doi.org/10.1126/science.aat8084 (2018).

30. 30.

Chiles, J., Buckley, S. M., Nam, S. W., Mirin, R. P. & Shainline, J. M. Design, fabrication, and metrology of 10100 multi-planar integrated photonic routing manifolds for neural networks. APL Photonics 3, 106101 (2018).

31. 31.

Piggott, A. Y. et al. Inverse design and demonstration of a compact and broadband on-chip wavelength demultiplexer. Nat. Photonics 9, 374–377 (2015).

32. 32.

Piggott, A. Y., Petykiewicz, J., Su, L. & Vučković, J. Fabrication-constrained nanophotonic inverse design. Sci. Reports 7, 1786 (2017).

33. 33.

Frandsen, L. H. & Sigmund, O. Inverse design engineering of all-silicon polarization beam splitters. In Photonic and Phononic Properties of Engineered Nanostructures VI, vol. 9756, 97560Y (International Society for Optics and Photonics, 2016).

34. 34.

Cao, Y., Li, S., Petzold, L. & Serban, R. Adjoint sensitivity analysis for differential-algebraic equations: The adjoint dae system and its numerical solution. SIAM J. on Sci. Comput. 24, (1076–1089 (2003).

35. 35.

He, K., Zhang, X., Ren, S. & Sun, J. Deep residual learning for image recognition. In Proceedings of the IEEE conference on computer vision and pattern recognition, 770–778 (2016).

36. 36.

Kang, Z. et al. Resolution-enhanced all-optical analog-to-digital converter employing cascade optical quantization operation. Opt. Express 22, 21441–21453 (2014).

37. 37.

Tian, Y. et al. Broadband 13 couplers with variable splitting ratio using cascaded step-size mmi. IEEE Photonics J. 10, 6601008 (2018).

38. 38.

Xu, K. et al. Integrated photonic power divider with arbitrary power ratios. Opt. Lett. 42, 855–858 (2017).

39. 39.

Lu, L., Zhang, M., Zhou, F. & Liu, D. An ultra-compact colorless 50: 50 coupler based on PhC-like metamaterial structure. In Optical Fiber Communications Conference and Exhibition (OFC), 2016, Tu3E.5 (IEEE, 2016).

40. 40.

Kingma, D. P. & Ba, J. Adam: A method for stochastic optimization. arXiv preprint arXiv 1412, 6980 (2014).

41. 41.

Palik, E. D. Handbook of optical constants of solids. In Handbook of optical constants of solids, 429–443 (Elsevier, 1997).

Download references

## Author information

Authors

### Contributions

M.T. and K.K. conceived the device idea(s) and numerical tests, M.T., D.J. and T.K.-A. developed the neural network scripts, M.T. conducted the numerical and neural network tests and analyzed the results. M.T., K.K., T.K.-A., D.J., B.W., C.L. and K.P. helped interpreting the results, wrote, and reviewed the manuscript.

### Corresponding author

Correspondence to Keisuke Kojima.

## Ethics declarations

### Competing Interests

The authors declare no competing interests.

## Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

## About this article

### Cite this article

Tahersima, M.H., Kojima, K., Koike-Akino, T. et al. Deep Neural Network Inverse Design of Integrated Photonic Power Splitters. Sci Rep 9, 1368 (2019). https://doi.org/10.1038/s41598-018-37952-2

Download citation

• Received:

• Accepted:

• Published:

## Further reading

• ### Intelligent designs in nanophotonics: from optimization towards inverse creation

• Ning Wang
• Wei Yan
• Min Qiu

PhotoniX (2021)

• ### Deep neural networks for the evaluation and design of photonic devices

• Jiaqi Jiang
• Mingkun Chen
• Jonathan A. Fan

Nature Reviews Materials (2021)

• ### Optical meta-waveguides for integrated photonics and beyond

• Yuan Meng
• Yizhen Chen
• Xingjie Ni

Light: Science & Applications (2021)

• ### Analogue computing with metamaterials

• Farzad Zangeneh-Nejad
• Dimitrios L. Sounas
• Romain Fleury

Nature Reviews Materials (2021)

• ### Deep learning for the design of photonic structures

• Wei Ma
• Zhaocheng Liu
• Yongmin Liu

Nature Photonics (2021)

## Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

## Search

### Quick links

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing