This study is a discovery of interesting and far reaching properties of the world leading herbicide active ingredient glyphosate. Here we demonstrate the cell adhesion-modifying characteristics of glyphosate affecting cellular interactions via Arg-Gly-Asp (RGD)-dependent integrins. This conclusion was supported by the observations that a glyphosate surface coating induced integrin-specific cell adhesion, while glyphosate in solution inhibited cell adhesion on an RGD-displaying surface. A sensitive, real-time, label-free, whole cell approach was used to monitor the cell adhesion kinetic processes with excellent data quality. The half maximal inhibitory concentration (IC50) for glyphosate was determined to be 0.47 ± 0.07% (20.6 mM) in serum-free conditions. A three-dimensional dissociation constant of 0.352 mM was calculated for the binding between RGD-specific integrins in intact MC3T3-E1 cells and soluble glyphosate by measuring its competition for RGD-motifs binding, while the affinity of those RGD-specific integrins to the RGD-motifs was 5.97 µM. The integrin-targeted affinity of glyphosate was proven using competitive binding assays to recombinant receptor αvβ3. The present study shows not only ligand-binding properties of glyphosate, but also illustrates its remarkable biomimetic power in the case of cell adhesion.
Cell adhesion is the fundamental process in tissue development by which cells form contacts with each other or with their substratum through specialized protein complexes. Although cells express various cellular adhesion molecules (such as cadherins, members of the immunoglobulin superfamily, syndecans, integrins, and selectins), the integrin transmembrane heterodimeric receptors are the most studied family and play an important role in cell–cell and cell–extracellular matrix (ECM) interactions. Divergence of the integrin subunits provides a basis of their versatility in initiating cell adhesion processes1. Certain integrins are quite specific in their ligand-binding properties for the common Arg-Gly-Asp (RGD) tripeptide sequence of the ECM proteins. Integrin–ligand interactions activate many critical signal transduction pathways. Therefore, targeting of integrins may interfere with normal cellular functions and play critical roles in modulating cellular processes including proliferation, migration, differentiation and survival2.
Toxicants can affect cellular processes through receptors, ion channels, enzymes, binding proteins or cytoskeleton molecules and thus may alter normal functioning of the cell. Different xenobiotics can cause a wide variety of biological effects, acute toxicity, immunological reactions, disturbances in the hormonal homeostasis through non-genotoxic mechanisms3,4 or cancer through genotoxicity5. Several studies have showed impacts of xenobiotics on cellular signalling, cell plasticity, adhesion and migration6, and due to its expanding use as an agricultural and household herbicide, glyphosate (N-(phosphonomethyl)glycine) has come into the focus of toxicity studies. Although glyphosate is an organophosphonate, similarly to organophosphate insecticides, has been shown to undergo enzymatic biodegradation e.g. by microorganisms including Agrobacteria7,8. Numerous studies have indicated in vitro toxicity of glyphosate and its formulated products on various cells, as well as in vivo toxic effects on a wide range of organisms from ecotoxicity indicator organisms to man. Recent studies showed cytotoxicity of glyphosate on various cell lines including human fibroblast (GM38) and human fibrosarcoma (HT1080) cells9, human epithelial type 2 (HeLa contaminant) cells (Hep-2)10, embryonic kidney (HEK293) and human hepatoma (HepG2) cells11, human epithelial keratinocyte cells12, human choriocarcinoma (JEG3) cells11,13, NE-4C: murine stem cell-like neuroectodermal cells14, human chorioplacental (JAr) cells15, human hematopoietic Raji cells (Epstein-Barr virus transformed human lymphocytes)16, and murine osteoblastic cell line (MC3T3-E1)17.
Exposure of rat hippocampal pyramidal cells to glyphosate at 2–6 mg/ml caused neuronal abnormalities18, and glyphosate absorption across Caco-2 epithelial cell tissues indicated neurotoxicity-related saturable glyphosate uptake through epithelial transporter enzyme activity in an ATP- and Na+-independent manner, not competed by specific amino acids or transporter inhibitors19. At concentrations of 0.09–1.7 mg/ml it caused DNA damage in leucocytes such as human peripheral blood mononuclear cells, and trigger DNA methylation in human cells20. It also showed inhibition of aromatases, key enzymes in steroid hormone biosynthesis21, and its teratogenic effects on vertebrates were linked to the retinoic acid signaling pathway22,23. Moreover, glyphosate-based herbicides exerted even stronger toxicity e.g., Roundup Transorb caused thyroid hormone homeostasis imbalance in male rats24.
Currently, cytotoxicity studies are based mainly on conventional end-point methods with long preparation and incubation procedures, many of them are using labels and easily confined by high cost and low-throughput. Development of biosensor techniques and their application work out in different areas, including cytotoxicity studies, is becoming of growing significance. Especially, whole cell-based sensors become extremely important due to their possibility to measure comprehensive and functional effects of different xenobiotics. Biosensors, as rapid, sensitive, and low-cost screening techniques, are applicable in clinical diagnosis and in monitoring of environmental pollutants as well. In the past years, the evanescent filed-based surface sensitive resonant waveguide grating (RWG) biosensor Epic BenchTop (BT) has been proven as a useful method for real-time, high-throughput, and label-free detection of cell adhesion, spreading and signalling events based on measuring of dynamic mass redistribution within a 150 nm range on the sensor surface25,26,27,28.
Recently, we suggested an approach for the feasibility of using the RWG technology for the analysis of integrin–ligand interactions by measuring the kinetics of cell adhesion29. The proposed fast and non-invasive screening tool uses intact cells, is applicable for label-free screening of potential pharmaceutical compounds, and it can also be useful in studying the effects of xenobiotics on cell adhesion processes. In this approach, a change in the resonant wavelength of the guided light occurs when cells adhere and spread on the sensor surface until an adhered cell monolayer is formed. A signal is detected as a shift in the resonant wavelength (Δλ), the magnitude of which is proportional to the area of the sensor covered by spread cells and the local refractive index increment inside the evanescent field29,30,31. Cell adhesion molecules and complexes are located in the evanescent field ~150 nm above the sensor surface, thus contribute to the local refractive index shift. Therefore, non-adhering cells, which are located in the bulk assay medium outside of the evanescent field, are not detected by the biosensor and are excluded from the measurement. In our previous study17 on adhered MC3T3-E1 cells we found that the shape of glyphosate-treated cells became elongated and glyphosate caused cell detachment by a yet undeciphered mechanism. A similar effect was reported by Elie-Caille and co-workers on a HaCaT keratinocyte cell line32,33. On the basis of our previous results we assume that the mechanism of these induced changes in cell morphology are likely to progress through interaction with cell integrin receptors. In the present study, we examine the impact of glyphosate on cell adhesion processes by using the Epic BT technique and assess differences in its affinity to RGD-specific integrins in intact MC3T3-E1 cells compared to those of RGD-motifs.
Results and Discussion
Toxic effects of environmental chemicals can lead to passive (necrosis) or active (apoptosis) cell death, and the integrated cellular events of which, induced by given xenobiotics, are readily detected with biosensor techniques. In our previous study17 addition of glyphosate at concentrations of 0.4% and above caused complete detachment of entire MC3T3-E1 cell layers from the sensor surface, while lower concentrations resulted in modified cell morphology of adhered cells on the surface. These attachment-modifying characteristics indicate influences on adhesion processes possibly though affecting cellular interactions with cell-adhesion proteins. However, glyphosate has not been reported previously to act as a ligand for integrins. To confirm that glyphosate behaves as a cell integrin ligand, we performed cell adhesion assays on RGD-displaying polymer (well-known to promote cell adhesion) and glyphosate surfaces using the Epic BT technique.
Adhesion on RGD density tuned surfaces and integrin–RGD dissociation constant in living MC3T3-E1 cells
To characterize the adhesion of MC3T3-E1 cells on RGD-displaying biomimetic surfaces, the dependence of the kinetics of the adhesion process on the surface density of RGD was determined using RGD surface density tuned sensor surfaces. Table 1 summarizes the calculated data for the copolymer mixtures used for RGD-tuning, regarding the estimated molar surface density of the RGD ligands, ligand-to-ligand distances, and numbers of ligands per unit area in each composition applied. The ratio of the RGD moieties on the surface was adjusted using a mixture of poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) and PLL-g-PEG-RGD. The composition of the PLL-g-PEG component was PLL(20)-g(3.5)-PEG(2) (hereafter PP), while that in the RGD-containing component was PLL-g-PEG/PEGGGGGYGRGDSP (PLL-g-PEG-RGD-12% [PLL(20)-g(3.5)-PEG(2.3)/PEG(3.4)-RGD]) (hereafter PPR). Thus, the copolymer PP:PPR was composed of several molecular moieties of different molecular weights (MWs): PLL (MW: 20 kDa) grafted with short non-functionalized PEG (MW: 2 kDa) and long PEG (MW: 3.4 kDa) terminated with RGD-motif 34. The molecular weight of the copolymer (MWPP:PPR) was calculated using following equation35:
where P = 12% is the fraction of functionalized PEG per copolymer. Thus MWPP:PPR was determined to be 88.4 kDa. The surface density of the RGD-motif (ρRGD) was calculated from copolymer composition26,36:
where Γ is the mass of the copolymer adsorbed to the Nb2O5 sensor surface, reported to be 184 ng/cm234, Q is the volume percent of the PPR moieties in the mixture with PP, NLys = 96 is the average number of Lys units per PLL backbone, and g = 3.5 is the number of Lys units per PEG chain (grafting ratio). The estimated ligand-to-ligand distance (dRGD–RGD), assuming hexagonal distribution of the ligands on smooth surface36, is obtained from:
where NA = 6.022 × 1023 mol−1 is Avogadro’s number. The numbers of ligands per unit area (νRGD) were calculated from ligand surface density (ρRGD) by multiplying it with Avogadro’s number.
MC3T3-E1 adhesion appeared to proportionally increase with the RGD-motif surface density, ρRGD. This process occurred to be slightly affected by preosteoblast cells showing a limited adherence capability to the non-adhesive PP surface. Such non-specific adhesion to the assumedly protein-repellent PP surface has been reported for several cell types, including osteoblast cells36, and has been attributed to incomplete surface coverage by PP due to small defects in the PEG-brushes. To assure that adhesion assessments reflect only integrin-specific binding to RGD-motifs in the calculations, the background due to non-specific binding to PP was subtracted from the biosensor responses.
The two-dimensional dissociation constant for integrin-RGD binding (2DKd) was obtained from the fitting of the biosensor signal at saturation level (Δλmax) as a function of the average number of ligands per unit contact area (νRGD). Thus, in logistic non-linear fitting, supposing the binding of a given integrin ligand proceeds on a single integrin binding site as an equimolar process and there is no cooperativity for the binding of ligand26,37, 2DKd (PPR) was found to be 359.6 ± 62.1 μm−2 with an adjusted R2 value of 0.972 (Fig. 1).
The 2DKd constant provides information about the equilibrium of the surface-bound ligand and intact cell integrin as a planar adhesion process. It can be easily converted to a three-dimensional dissociation constant (3DKd) in solution38:
where h is the confinement length39, representing the cell–substrate separation distance of 100 nm26. The estimated value of 3DKd (PPR) for the affinity of the RGD-specific integrins in the intact MC3T3-E1 cells and RGD-motifs was found to be 5.97 µM. This value shows nearly 5-fold higher affinity for RGD-motifs to RGD-specific integrins of embedded in the membrane of MC3T3-E1 cells, than that previously reported for HeLa cells26. We believe, this is in connection with the type of integrins expressed by the two cell types, being a more diverse population in case of the preosteoblast cells40,41,42.
Cell adhesion assay on glyphosate-containing surfaces – comparison to the adhesion on RGD-containing surface
The kinetics of MC3T3-E1 cells adhesion in the wells of the Epic cell assay microplate (Fig. 2) indicate a considerable effect of glyphosate on the cell adhesion process. It is known, that cell adhesion to an uncoated sensor surface under serum-free conditions is a non-specific process showing adsorption-like kinetics (Fig. 2a, green curve). Surprisingly, at a concentration of 0.1% glyphosate enhanced cell adhesion compared to the control cells, and in the case of its low concentrations (0.1–0.4%) a sigmoid-like response was obtained (Fig. 2a). Note, the sigmoidal shaped kinetics is a typical characteristics of receptor mediated cell adhesion events25,26. Microscopy images also confirm that cells adhered to the surface treated with glyphosate had more spread shape than the control cells on uncoated surface (Fig. 2a). Normal cell structures were detected in control cells by phase contrast microscopy, while notable vacuolization was found in the cells on glyphosate-containing surface.
As evidenced by the experiments, cell adhesion is gradually suppressed at higher glyphosate concentrations (0.4–1.7%) (Fig. 2a, red and black curves). This phenomenon, manifested in the damping of the sigmoid curve, is likely to be caused by sensor surface saturation with glyphosate and subsequent increasing occurrence of the compound in the solution. This effect leads to a blockage of cell adhesion probably due to non-adsorbed glyphosate. At a concentration of 1.7% no cell adhesion signal was detected (Fig. 2a, black curve).
Based on this data, we suppose that adsorbed glyphosate reproduces a biomimetic surface and enhances cell adhesion. Nevertheless, glyphosate molecules in solution effectively block the integrin receptors of the cells and decrease cell adhesion ability. To verify this hypothesis, (i) the effects of surface-bound glyphosate on cell adhesion were compared to that of the known adhesion motif RGD; (ii) the strength of binding of glyphosate to the sensor surface was tested; and (iii) the effect of soluble glyphosate at increasing concentrations on cell adhesion were assessed (see below) on RGD displaying polymer surfaces.
Comparing the biosensor signal obtained upon cell adhesion to 0.1% glyphosate coating with that to an RGD-motif displaying surface (knowing to promote cell adhesion) indicates that the two processes show similar, almost identical kinetics (see Fig. 2b). Biosensor responses were normalized to the maximal signal obtained on the biosensor surface covered with the given substance: Δλs(t)/Δλs,max, where Δλs(t) indicates the actual change in the resonant wavelength of the guided light belonging to cell adhesion to the given substance on the surface (s) and time point (t), and Δλs,max indicates the maximal wavelength shift recorded for cell adhesion with the given substance on the biosensor surface. The results support the new concept that glyphosate may act, by a yet unidentified mechanism, as an integrin ligand that promotes surface adhesion of cells.
To compare binding affinity to integrin, molecular amounts of glyphosate and RGD-motifs in PP:PPR adsorbed onto Nb2O5 biosensor surface were liken. In the optimized surface modification protocol 500 μg/ml PP:PPR was applied, corresponding to the RGD molar surface density of 3.4270 pmol/cm2 and 20637 ligands/μm2 (see Table 1). The quantity of surface adsorbed glyphosate in case of 0.1% (that results in a sigmoid curve, technically identical to that obtained with 500 μg/ml of PP:PPR) without washing was measured to be 4 ng/cm2, corresponding to a molar surface density 17.53 pmol/cm2 and 105180 ligands/μm2. Based on these results an average intermolecular distance between glyphosate molecules was calculated to be 3.3 nm by using Eq. 3. This surface density is completely in line with the above hypothesis, an averaged RGD–RGD distance below 10 nm leads to strong sigmoidal shaped cell adhesion26,36, and maximum spacing between the ligands to induce cell adhesion was reported to be about 70 nm for MC3T3 cells43. Moreover, the biosensor surface may facilitate functional orientation of glyphosate molecules involving cation binding thus, stabilizing glyphosate in more efficient position for cell adhesion.
To check if glyphosate could be irreversibly adsorbed on the surface, it was incubated on the sensor surface for 30 min at room temperature, and then the surface was rinsed three times with 20 mM HEPES HBSS, pH 7.4. In this case the sensor response to cell adhesion showed adsorption-like kinetics (almost identical to the signal on the uncoated surface) indicating that glyphosate has predominantly been washed off from the sensor surface with intense rinsing (Fig. 3).
Cell adhesion inhibition assay and integrin–glyphosate dissociation constant in living MC3T3-E1 cells
The whole cell Epic BT biosensor approach to determine the affinity of ligands to cell adhesion receptors26, developed and applied previously to identify the half maximal inhibitory concentration (IC50) for echistatin29, was employed here to detect the cell adhesion process under the impact of glyphosate. First, the sensor surfaces were coated with an RGD-motif-displaying PP:PPR film. Then, MC3T3-E1 cells were preincubated with glyphosate at different concentrations, these suspensions were pipetted onto the sensor surfaces, and inhibition of the cell adhesion process was determined using the Epic BT instrument. All biosensor responses were normalized to the maximal signal of the negative control (Δλc(t)/Δλ0,max, where Δλc(t) indicates the actual change in the resonant wavelength of the guided light belonging to the given glyphosate concentration (c) and time point (t), and Δλ0,max indicates the actual change in the resonant wavelength of the guided light belonging to 0 glyphosate concentration (0) at t > 60 min of cell adhesion). The results illustrate a dose-dependent decrease in cell adhesion in response to preincubation of the cells with glyphosate (Fig. 4). In the presence of an inhibitor, cell adhesion is decreasing due to integrin blocking29, resulting in reduction in the maximal biosensor signal (Fig. 4a). The flat kinetic curve indicates that the spreading of MC3T3-E1 cells was completely blocked by preincubation with 1.7% glyphosate. The Epic BT signals in the different measurements were analysed and compared by normalizing data of each single well to the appropriate negative control well (Fig. 4b). The half maximal inhibitory concentration (IC50) value was calculated as a combined value from four separate experiments.
The binding between RGD-specific integrins in the intact MC3T3-E1 cells and soluble glyphosate is a competition at a single site for RGD-motifs binding. The estimated value of the 3DKd (glyphosate) for the binding of cell integrins and glyphosate was calculated to be 0.352 mM by using equation from Cheng and Prusoff44:
where IC50 (glyphosate) is the half maximal inhibitory concentration for glyphosate (20.6 mM), [RGD] is the concentration of RGD on the sensor surface (assuming a confinement length of 100 nm for the RGD moieties yields [RGD] = 0.343 mM), and 3DKd (PPR) is the dissociation constant in solution for the binding between PPR and RGD-specific integrins embedded in the cell membrane, its value obtained for MC3T3-E1 cells is 5.97 × 10–3 mM (see Eq. 4).
Moreover, the above determined dissociation constants – 352 μM – can be compared to related literature values of dissociation constants of various integrin ligands. The work of Kapp et al.45 summarizes the most typical integrin ligands and their binding strengths to various integrin types, and discusses the advantages and disadvantages of measurement on isolated integrins. The low affinity binding – Kd values larger than 10 μM – is typical for integrin ligands and there are several examples in Table 1 of Kapp et al.45. Therefore, the obtained value suggests the possibility of biological significance. Considering the kinetic parameters of the binding, such a value would result in a koff range of 103–105 s−1 with typical kon values of 106–108 M−1s−1 according to the calculations of Sanders37, considering a typical sized ligand.
The explanation of the observed effects of glyphosate on cell adhesion
The results obtained on the inhibition of cell adhesion by glyphosate explain its concentration-dependent effect observed (see above). At a concentration of 0.1% (4.38 mM) of glyphosate on the bare sensor surface, a sigmoidal shape spreading curve of MC3T3-E1 cells is obtained (see Fig. 2). At this concentration glyphosate molecules saturate the surface and promote cell attachment, and glyphosate molecules still remaining in solution cannot block effectively the adhesion of the cells (see Fig. 5a for schematic explanation). At higher concentrations (0.2–1.7%), however, glyphosate in the solution can suppress cell adhesion, by saturating cell surface integrins (Fig. 5b), even if glyphosate molecules adsorbed to the surface are imitating an RGD pattern (see Fig. 2). At even higher concentrations (IC50 = 9.77 mM), glyphosate can drive adhered MC3T3-E1 cells off from the bare sensor surface17. This effect is even higher if the MC3T3-E1 cells are preincubated with glyphosate prior to being allowed to come in contact with the surface they could adhere to. Such preincubation with glyphosate at concentrations nearly 5-fold higher (IC50 = 20.6 mM (0.47%)) than those promoting cell adhesion can prevent MC3T3-E1 cell attachment even to surfaces activated with PP:PPR containing adhesion promoting RGD moieties (Fig. 5c), as the corresponding IC50 value (see Fig. 4) is reached. Moreover, glyphosate at 10-fold higher concentrations (about 40 mM, data not shown) is capable to compete even adhered cells off from a surface modified with PP:PPR (Fig. 5d). Such concentration-dependent dual effects on cell binding processes are seen not only with glyphosate: cell adhesion proteins are also known to be capable to become specific inhibitors of their own function if they were bound in excess to a cellular receptor46, and similar concentration-dependent activation and inhibition of cell adhesion has been seen with glycoproteins capable to bind to integrins (fibronectin, vitronectin). Surface coating with fibronectin at 3 μg/ml (7 nM) was effective in attaching cells, while at 3300-fold higher, 10 mg/ml (23 µM) concentrations the same soluble ligands inhibited cell adhesion46.
The role of inhibition of integrins in cell adhesion and the model explaining the observed effects
Integrins are a family of adhesion receptors that interact with a variety of extracellular ligands, typically cell-adhesive proteins in ECM. MC3T3-E1 cells express several integrins, including α2β1, α3β1, α4β1, α5β1, α6β1, αvβ1, and αvβ342. Some integrins are quite specific in their ligand-binding properties for the RGD tripeptide sequence of the ECM. The RGD sequence is the active unit of a large number of adhesive extracellular matrix proteins. It is known that RGD when coated onto a surface promotes cell adhesion, whereas in solution has a blocking effect on adhesion47,48. However, the affinity of RGD peptides could be different due to the conformation and nature of the surrounding amino acids, and is significantly (>1000-fold) lower than that of the proteins from which it is derived49.
Integrins may play important roles as regulators of apoptosis50. Among this inhibition of integrin–ligand interactions, the soluble RGD-based peptides getting to the cell directly may induce apoptosis by direct caspase-3 activation as well51. However, there are other types of programmed cell death mechanisms, and cells could undergo anoikis, apoptosis induced by the prevention of cell adhesion52,53,54.
Cell adhesion to ECM requires divalent cations in the medium and each integrin heterodimer contains several divalent cation binding sites. The bound divalent cations can moderate the integrin function55. The ligand-binding site in the integrins is at or near a binding site for divalent cations49. The emulated crystal structures of RGD-liganded αvβ3 show that divalent cations act as a bridge between ligands and the heterodimeric integrin, and the glycine residue makes hydrophobic contacts with αv56. The aspartic acid of RGD contributes to divalent cation binding providing one of the coordination sites57. Although glyphosate bears no obvious structural similarity to RGD (see Fig. 6), it is a derivative of glycine and is also a strong chelator of Ca2+, Mg2+, and of many other divalent and trivalent metallic cations58,59,60.
We hypothesize that the carboxy terminus of glyphosate mimics an aspartic acid in RGD-motif and thus the integrin and glyphosate can share the cation. In turn, glycine in glyphosate could make a hydrophobic contact with integrin. Nonetheless, we found that glycine alone could not actually block the integrin receptors or induce cell adhesion at concentrations of 12.5, 25 and 50 mM (data not shown). Loomis et al. have observed that glycine at concentrations as high as 50 mM can block Dictyostelium cell adhesion through a non-integrin specific mechanism61. It should be noted that Dictyostelium cells cannot form integrin mediated focal adhesions, unlike mammalian cells, where such interactions generate much stronger adhesion to ECM.
These data evidence that glyphosate, under certain conditions, results in integrin blocking, moreover, its differential activity in serum and under serum-free conditions is explained. In our recent publication based on cell detachment measurements, the IC50 value for glyphosate obtained in serum-containing medium was reported to be 2.98 mM instead of 9.77 mM under serum-free conditions (in buffer)17. From the present methodology, based on measuring the kinetics of cell adhesion, the IC50 value for glyphosate in serum-containing medium is 5.7 mM (Fig. 7) in comparison to 20.6 mM of inhibition effect under serum-free conditions. This appeared to be paradoxical, as any toxicant is expected to be less effective in serum-containing medium, as the protein content in serum can attenuate their inhibitory effect. In light of the current results, however, the increased inhibitory potential of glyphosate in serum, compared to serum-free conditions, is explained: serum contains numerous other proteins capable to interact with cellular integrins (e.g. about 220 μg/ml of fibronectin62 and 200–300 μg/ml of vitronectin63). Their miniscule effects (1/10, 10% FBS is applied for serum-containing medium), however, add up to the inhibitory effect of glyphosate, thus, it can exert effective inhibition at lower concentrations than under serum-free conditions. A vast amount of data in the scientific literature has been published on the differing effects of various synthetic and natural peptides on cell adhesion in serum-containing and serum-free conditions29,46,47,54,64,65,66,67,68,69,70,71,72. A wide variety of the applied concentrations of inhibitors – from nano- to millimolar range – can be explained by not only cell type (and subsequently expressed integrins), surface coating, incubation time, differences in the affinity of inhibitors, but also by presence or absence of serum during experiments.
Validation of the competitive binding of glyphosate to integrin αvβ3
The integrin-targeting properties of glyphosate was tested in enzyme-linked immunosorbent assay (ELISA) and Epic assay cell-free formats by measuring the competitive inhibition of the binding of a recombinant αvβ3 integrin to the RGD motifs. Integrin αvβ3 is a receptor for vitronectin, nevertheless recognizes a broad range of RGD-containing ECM proteins with different rates of specificity. Snake venom disintegrin echistatin, known to bind to αvβ3 integrin with high affinity, was chosen as a positive control, while tirofiban, with no blocking effect on αvβ3 integrin, was applied as a negative control.
Data obtained by ELISA and Epic measurements (Fig. 8) clearly indicate concentration-dependent competitive inhibition of the binding of αvβ3 integrin to the immobilised RGD motifs by glyphosate and echistatin, while no significant effects caused by tirofiban. Both techniques revealed the integrin-targeting properties of glyphosate at concentrations at 11 mM and above. The ELISA format appeared to be more sensitive as almost full inhibition was seeen by glyphosate at 11 mM, and substantial inhibition by echistatin at 20 nM. This may be due to the fact that all unreacted components are washed out in the ELISA format, while remain in solution in the sensitive volume and contribute to the assay signal in the Epic assay. In contrast, this slight disadvantage is far compensated in the Epic technique by providing results of the same trends, by not requiring immunoreagents for detection and by its simplicity in the assay protocol.
From the present study we can conclude several ascertainments. First, MC3T3-E1 cells can adhere to the glyphosate adsorbed on the sensor surface, showing ligand-specific kinetics. Second, soluble glyphosate significantly reduces the MC3T3-E1 cells adhesion via blocking RGD-specific integrins in a concentration-dependent manner, as also validated by cell-free integrin binding assays in both ELISA and Epic formats. Third, it is unknown whether and how glyphosate may interfere with the cellular behaviours provoked by the integrin–ECM interaction in MC3T3-E1 cells.
Based on the results obtained we suggest that glyphosate could interact as a ligand with RGD-specific cell integrins. Glyphosate adsorbed to the surface induced cell adhesion with kinetics similar to adhesion to PP:PPR-modified surface, and a comparison of the 3DKd dissociation constants of glyphosate and RGD indicated that approximately 58-fold times more glyphosate molecules than RGD-motifs are required per sensor surface unit to obtain the same cell adhesion kinetics. It means, that glyphosate in a molar surface density of 17.53 pmol/cm2 could trigger same cell adhesion kinetic like RGD-motif at 0.3 pmol/cm2 (in equivalent to approximately 26 nm RDG–RGD distance). Preincubation of the cells in the presence of increasing concentration of glyphosate in solution resulted in a dose-dependent inhibition of cell adhesion to PP:PPR-modified surface. Indeed, biosensor measurements revealed that glyphosate forms an instable film, it can be completely removed by intense washing with glyphosate free solution, and cell adhesion identical to the adhesion obtained on the bare surface is seen.
Finally, possible physiological consequences of glyphosate being capable to block cell adhesion by mimicking integrin ligands should also be considered. The cytotoxic effects of glyphosate on apoptosis via oxidative stress by forming reactive oxygen species have been widely discussed in the scientific literature. Our results on its interferences with cellular adhesion processes suggest that it may trigger anoikis, as a special form of apoptosis. Such interactions can lead to physiological alternations e.g., bone resorption, abnormal tissue or organ development, decayed immunofunctions or anomalies in processes where cell adhesion plays an essential role.
All chemicals and reagents were obtained from Sigma-Aldrich Chemie GmbH (Schelldorf, Germany), unless stated otherwise. Glyphosate (in form of its isopropylammonium salt) analytical standard used was Pestanal grade, from Riedel-de Haën (Seelze, Germany). A stock solution glyphosate was prepared freshly in 20 mM 4-(2-hydroxyethyl)-1-piperazine ethanesulfonic acid (HEPES) Hank’s balanced salt solution (HBSS) buffer or in serum-containing cell culture medium, the pH was adjusted to pH 7.4, and solution was filtered through a filter (0.22 μm).
Epic BT biosensor technique
The biosensor measurements were performed using 96- or 384-well Epic cell assay microplates (#5080, #5040, Corning Incorporated, Corning, NY, USA) interrogated by a table top Epic BT instrument (Corning Incorporated, Corning, NY, USA). The bottom of each well of the microplate contains an RWG-based optical biosensor, which consists of a waveguiding layer of Nb2O5 supported by a corrugated glass substrate. The corrugation acts as an optical grating and incouples the incident light into the waveguide layer, exciting the so-called waveguide mode. Upon excitation of the waveguide mode, an evanescent field with a penetration depth of 150 nm is created. The intensity of the evanescent filed decays exponentially with the distance from the sensor surface. The characteristic wavelength, at which the waveguide mode and evanescent field is created, is called the resonant wavelength. By changing the local refractive index inside the evanescent field, the resonant wavelength shifts to a new value. Proteins and living cells have a refractive index larger than that of the aqueous media; therefore, their adsorption or adhesion at the sensor surface shifts the local refractive index and detunes the resonant wavelength. The biosensor signal, the shift in the resonant wavelength, is monitored in real-time, thus not only the adhesion event and its magnitude, but also its kinetics can be followed. Each well of the microplate operates as separate sensors, therefore the microplate allows 96 or 384 parallel measurements by scanning the wavelength between 825 and 840 nm in every 3 s. The distribution of the resonant wavelength is imaged in each well by a high speed complementary metal oxide semiconductor camera73,74.
Preparation of the biosensor surface with biomimetic coating for cell adhesion studies
The synthetic copolymers, poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG, [PLL(20)-g(3.5)-PEG(2)]) (hereafter PP) and its RGD-functionalized counterpart, PLL-g-PEG/PEGGGGGYGRGDSP (PLL-g-PEG-RGD-12% [PLL(20)-g(3.5)-PEG(2.3)/PEG(3.4)-RGD]) (hereafter PPR) were obtained as powder from SuSoS AG (Dübendorf, Switzerland) and were stored at −20 °C until use. The stock solutions of 1.0 mg/ml PP and PPR were prepared in 10 mM HEPES (pH 7.4) and sterile-filtered. Surface coating with different concentration of RGD-motifs and PLL-g-PEG (hereafter PP:PPR) was created by mixing the two 1 mg/ml stock solutions in different ratios, than 50 µl (for 96-well plate) or 30 µl (for 384-well plate) of this mixture was added to the prewetted wells of Epic biosensor plate and incubated for 30 min at room temperature on the shaking machine. Reagent excess was removed by rinsing the surface three times with 20 mM HEPES HBSS, pH 7.4.
The osteoblastic cell line MC3T3-E1 (93021013, Sigma-Aldrich Chemie GmbH, Schelldorf, Germany) was maintained in α-modified minimal essential medium (α-MEM, M4526, Sigma-Aldrich Chemie GmbH, Schelldorf, Germany), supplemented with 10% fetal bovine serum (Biowest SAS, France), 2 mM L-glutamine, 100 U/ml penicillin and 100 µg/ml streptomycin solution. Cells were cultured in a humidified atmosphere containing 5% CO2 at 37 °C. On reaching 80% confluence, cells were detached every 3–4 days using 0.05% (w/v) trypsin, 0.02% (w/v) EDTA solution and not used beyond passage 20.
For the experiments, MC3T3-E1 cells were removed from tissue culture dishes using a trypsin-EDTA. Trypsin digestion was terminated by the addition of completed medium and the harvested cells were centrifuged at 200 × g for 5 min. The cell pellet was resuspended in assay buffer (20 mM HEPES HBSS, pH 7.4) for serum-free conditions or in serum-containing cell culture medium.
Epic cell adhesion assay on RGD-tuned surfaces
Coatings of a 96-well Corning Epic assay microplate with mixtures of PP and PPR synthetic copolymers at different PP:PPR ratio (v/v %, from 0 to 100% of PPR) were prepared as described earlier26. Upon surface modification, stable baselines were established in the wells with 50 µl of 20 mM HEPES HBSS, pH 7.4. MC3T3-E1 cells were harvested and 100 µl of cell suspension containing 8000 cells in assay buffer were added to the sensor wells. For buffer controls, all wells were coated with appropriate copolymers and then cell-free assay buffer was added. All measurements were replicated at least three times at room temperature. The averaged response of cell adhesion on the antifouling PP surface was used for background correction.
Epic cell adhesion assay on glyphosate-containing surface
Prior to addition of the cell suspensions, a baseline was recorded in the wells of the Corning Epic cell assay microplate for 1 h with 25 μl of glyphosate solutions at different concentrations or in appropriate assay medium (as negative control), without previous surface modifications. Upon stable baselines had been established for all wells, the MC3T3-E1 cells were harvested and 25 µl of cell suspension containing 8000 cells in assay medium were added to the wells using an electronic 16-channel pipette Finnpipette™ Novus (Thermo Fisher Scientific, Waltham, MA, USA) in stepping mode. Biosensor responses were recorded for 1 h. All treatments were replicated at least three times within each experiment at room temperature, and experiments (with serial concentration series) were repeated 3–5 times. The averaged response of the cell-free solution was used for background correction.
Epic cell adhesion inhibition assay
384-well Corning Epic assay microplate was coated with PP:PPR (1:1) as described above and then a baseline was recorded in the wells for 1 h in 20 μl 20 mM HEPES HBSS, pH 7.4. After the stable baselines had been established for all wells, the MC3T3-E1 cells were harvested and solutions containing glyphosate at varying concentrations were added to the cell suspension, resulting in a final cell density of 8000 cells/well. Then 30 μl of cell suspensions were seeded into the wells and biosensor responses were recorded for 1 h. Untreated MC3T3-E1 cells were used as negative control in the experiments. Reagent addition was performed using an electronic 16-channel pipette Finnpipette™ Novus in stepping mode. All treatments were replicated at least three times within each experiment at room temperature, and the whole experiments were repeated 3–5 times.
Calculation of surface adsorbed mass of glyphosate from the Epic BT biosensor data
The resonant wavelength shift (Δλ (pm)) recorded by the biosensor can be transformed to surface adsorbed mass (ng/cm2) by using the calibration equation of Orgovan et al.74. It should be noted that, the equation in32 is valid for polyelectrolyte solutions with a refractive index increment of dn/dc = 0.1955 cm3/g. The refractive index values of glyphosate solutions were determined at room temperature using a Rudolph J157 table top refractometer (Rudolph Research Analytical, Hackettstwon, NJ, USA). The refractive index increment of glyphosate dn/dc obtained was 0.2051 cm3/g. Therefore, the adsorbed mass can be calculated from the Epic BT data by the following modified calibration equation:
where ΔM is the surface adsorbed glyphosate mass (ng/cm2), and Δλ is the measured wavelength shift (in pm).
Phase contrast microscopy
Following Epic measurements cells were visualized in microplates using a Zeiss Axio Observer.Z1 microscope (Carl Zeiss AG, Oberkochen, Germany) with a 20× objective. Phase contrast images were captured and analysed using the AxioVision software (Carl Zeiss AG).
Competitive Epic integrin binding assay
The receptor binding assays were performed in 384-well Corning Epic assay microplates. The sensor surface was coated with 250 µg/ml PP:PPR (1:1) mixture in 10 mM HEPES pH 7.4 as above. Solutions of echistatin (to final concentrations of 20 and 40 nM), glyphosate (to final concentrations of 1.1 µM, 110 µM, 11 mM, and 22 mM), and tirofiban (to a final concentration of 500 nM) were added to the biosensor wells (20 µl/well). Upon stable baselines had been established for all wells in the Epic instrument, 20 µl of αvβ3 integrin (R&D Systems, Minneapolis, MN, #3050-AV) solution was added from a 384-well source plate to the biosensor microplate (at a final concentration of 4 µg/ml) using an electronic 16-channel pipette Finnpipette™ Novus and biosensor responses were recorded for 1 h at room temperature. Obtained biosensor data were corrected to the background (coated wells with buffer) and normalised to the averaged signal of the integrin binding without inhibitor (control).
Competitive enzyme-linked immunosorbent assay
ELISAs were carried out in high-capacity 96-well microplates (Nunc, Roskilde, DK, #442404). Plates were coated overnight at 4 °C with 100 µl/well of 250 µg/ml PPR in 10 mM HEPES (pH 7.4). Thereafter, plates were washed three times with PBS-Tween buffer (137 mM NaCl, 2.7 mM KCl, 10 mM Na2HPO4, 2 mM KH2PO4, 0.01% Tween 20, pH 7.4) and blocked for 1 h at room temperature with 150 µl/well of Tris-BSA buffer (20 mM Tris-HCl, 150 mM NaCl, 1 mM CaCl2, 1 mM MgCl2, 1 mM MnCl2, pH 7.5, 1% BSA). Upon subsequent three washing steps with PBS-Tween buffer, soluble integrin αvβ3 (2.0 µg/ml) and integrin inhibitors in Tris-BSA buffer added in volumes of 50 µl/well each were incubated in the coated wells for 1 h at room temperature. Subsequently, the plates were washed three times with PBS-Tween buffer and then 100 µl/well of the primary antibody (mouse anti-human CD51/61, BD Biosciences) in Tris-BSA buffer at 2 µg/ml was added and incubated for 1 h at room temperature. After washing tree times with PBS-Tween, 100 µl/well of the secondary horseradish peroxidase (HRP)-conjugated antibody (anti-mouse IgG-HRP) in Tris-BSA buffer at 1 µg/ml was added and incubated for 1 h at room temperature. After three washing steps with PBS-Tween buffer, the detection of HRP was performed using 100 µl/well of 1.2 mM of hydrogen peroxide as a substrate with 1.2 mM of 3,3′,5,5′-tetramethylbenzidine as a chromophore in 0.5 M citrate buffer (pH 5.0). Upon sufficient colour development (after 10–60 min), the enzymatic reaction was stopped by the addition of 50 µl/well of 4 N sulphuric acid, and colour intensities in the wells were read at 450 nm in endpoint mode using a SpectraMax iD3 Multi-Mode Microplate Reader (Molecular Devices, San Jose, CA, USA). Obtained immunoassay data were corrected to the background (coated wells with buffer) and normalised to the averaged signal of the integrin binding without inhibitor (control).
The shifts in the resonant wavelength, as the main signals detected in the Epic BT assay, were determined in at least three parallel treatments in each experiment, and all values are presented as mean ± SD. Statistical analyses were carried out for all treatments either on the Epic BT assay signals or on their values normalised to the negative control of the given experiment. Obtained data were analysed by using GraphPad Prism 6.0 (GraphPad Software, La Jolla, CA, USA) or Origin 8.5 (OriginLab Corp., Northampton, MA, USA). Concentration dependence was assessed by non-linear fit using sigmoid calibration curves on the basis of the four parameter logistic regression equation75. Statistical significance determination of the integrin binding results was performed with one-way ANOVA with statistical significance set to a p < 0.05.
The data generated or analysed during this study are available from the corresponding author on reasonable request.
Hynes, R. O. Integrins: Versatility, modulation, and signaling in cell adhesion. Cell 69, 11–25 (1992).
Meredith, J. E. & Schwartz, M. A. Integrins, adhesion and apoptosis. Trends Cell Biol. 7, 146–150 (1997).
Omiecinski, C. J., Vanden Heuvel, J. P., Perdew, G. H. & Peters, J. M. Xenobiotic metabolism, disposition, and regulation by receptors: From biochemical phenomenon to predictors of major toxicities. Toxicological Sciences 120, (2011).
Henkler, F. & Luch, A. Adverse health effects of environmental chemical agents through non-genotoxic mechanisms. J. Epidemiol. Community Heal. 65, 1–3 (2011).
Penning, T. M. Chemical Carcinogenesis. (Humana Press). https://doi.org/10.1007/978-1-61737-995-6 (2011).
Barouki, R. & Coumoul, X. Cell migration and metastasis markers as targets of environmental pollutants and the Aryl hydrocarbon receptor. Cell Adhes. Migr. 4, 72–76 (2010).
Vemanna, R. S. et al. Aldo-keto reductase enzymes detoxify glyphosate and improve herbicide resistance in plants. Plant Biotechnol. J. 15, 794–804 (2017).
Castro, A. A., de, Prandi, I. G., Kuca, K. & Ramalho, T. C. Enzimas degradantes de organofosforados: Base molecular e perspectivas para biorremediação enzimática de agroquímicos. Ciência e Agrotecnologia 41, 471–482 (2017).
Monroy, C. M., Cortés, A. C., Sicard, D. M. & De Restrepo, H. G. Citotoxicidad y genotoxicidad en células humanas expuestas in vitro a glifosato. Biomédica 25, 335 (2005).
Mañas, F. et al. Genotoxicity of glyphosate assessed by the comet assay and cytogenetic tests. Environ. Toxicol. Pharmacol. 28, 37–41 (2009).
Benachour, N. & Séralini, G.-E. Glyphosate Formulations Induce Apoptosis and Necrosis in Human Umbilical, Embryonic, and Placental Cells. Chem. Res. Toxicol. 22, 97–105 (2009).
Heu, C., Elie-Caille, C., Mougey, V., Launay, S. & Nicod, L. A step further toward glyphosate-induced epidermal cell death: Involvement of mitochondrial and oxidative mechanisms. Environ. Toxicol. Pharmacol. 34, 144–153 (2012).
Mesnage, R. et al. Evaluation of estrogen receptor alpha activation by glyphosate-based herbicide constituents. Food Chem. Toxicol. 108, 30–42 (2017).
Székács, I. et al. Environmental and Toxicological Impacts of Glyphosate with Its Formulating Adjuvant. Int. J. Agric. Biosyst. Eng. 8, 219–224 (2014).
Young, M. B., Oh, B. K., Lee, W., Won, H. L. & Choi, J. W. Study on orientation of immunoglobulin G on protein G layer. Biosens. Bioelectron. 21, 103–110 (2005).
Townsend, M. et al. Evaluation of various glyphosate concentrations on DNA damage in human Raji cells and its impact on cytotoxicity. Regul. Toxicol. Pharmacol. 85, 79–85 (2017).
Farkas, E. et al. Label-free optical biosensor for real-time monitoring the cytotoxicity of xenobiotics: A proof of principle study on glyphosate. J. Hazard. Mater. 351, 80–89 (2018).
Coullery, R. P., Ferrari, M. E. & Rosso, S. B. Neuronal development and axon growth are altered by glyphosate through a WNT non-canonical signaling pathway. Neurotoxicology 52, 150–161 (2016).
Xu, J. et al. The role of L-type amino acid transporters in the uptake of glyphosate across mammalian epithelial tissues. Chemosphere 145, 487–494 (2016).
Kwiatkowska, M. et al. The impact of glyphosate, its metabolites and impurities on viability, ATP level and morphological changes in human peripheral blood mononuclear cells. PLoS One 11, 1–13 (2016).
Defarge, N. et al. Co-formulants in glyphosate-based herbicides disrupt aromatase activity in human cells below toxic levels. Int. J. Environ. Res. Public Health 13, (2016).
Lajmanovich, R. C., Sandoval, M. T. & Peltzer, P. M. Induction of mortality and malformation in Scinax nasicus tadpoles exposed to glyphosate formulations. Bull. Environ. Contam. Toxicol. 70, 612–618 (2003).
Paganelli, A., Gnazzo, V., Acosta, H., López, S. L. & Carrasco, A. E. Glyphosate-based herbicides produce teratogenic effects on vertebrates by impairing retinoic acid signaling. Chem. Res. Toxicol. 23, 1586–1595 (2010).
de Souza, J. S. et al. Perinatal exposure to glyphosate-based herbicide alters the thyrotrophic axis and causes thyroid hormone homeostasis imbalance in male rats. Toxicology 377, 25–37 (2017).
Orgovan, N. et al. Adhesion kinetics of human primary monocytes, dendritic cells, and macrophages: Dynamic cell adhesion measurements with a label-free optical biosensor and their comparison with end-point assays. Biointerphases 11, 031001 (2016).
Orgovan, N. et al. Dependence of cancer cell adhesion kinetics on integrin ligand surface density measured by a high-throughput label-free resonant waveguide grating biosensor. Sci. Rep. 4, 4034 (2014).
Kurucz, I. et al. Label-free optical biosensor for on-line monitoring the integrated response of human B cells upon the engagement of stimulatory and inhibitory immune receptors. Sensors Actuators, B Chem. 240, 528–535 (2017).
Peter, B., Bosze, S. & Horvath, R. Biophysical characteristics of proteins and living cells exposed to the green tea polyphenol epigallocatechin-3-gallate (EGCg): review of recent advances from molecular mechanisms to nanomedicine and clinical trials. Eur. Biophys. J. 46, (2017).
Szekacs, I., Orgovan, N., Peter, B., Kovacs, B. & Horvath, R. Receptor specific adhesion assay for the quantification of integrin–ligand interactions in intact cells using a microplate based, label-free optical biosensor. Sensors Actuators B Chem. 256, 729–734 (2018).
Ramsden, J. J. & Horvath, R. Optical biosensors for cell adhesion. J. Recept. Signal Transduct. 29, 211–223 (2009).
Orgovan, N. et al. In-situ and label-free optical monitoring of the adhesion and spreading of primary monocytes isolated from human blood: Dependence on serum concentration levels. Biosens. Bioelectron. 54, 339–344 (2014).
Elie-Caille, C., Heu, C., Guyon, C. & Nicod, L. Morphological damages of a glyphosate-treated human keratinocyte cell line revealed by a micro- to nanoscale microscopic investigation. Cell Biol. Toxicol. 26, 331–339 (2010).
Heu, C., Berquand, A., Elie-Caille, C. & Nicod, L. Glyphosate-induced stiffening of HaCaT keratinocytes, a Peak Force Tapping study on living cells. J. Struct. Biol. 178, 1–7 (2012).
VandeVondele, S., Vörös, J. & Hubbell, J. A. RGD-grafted poly-l-lysine-graft-(polyethylene glycol) copolymers block non-specific protein adsorption while promoting cell adhesion. Biotechnol. Bioeng. 82, 784–790 (2003).
Tosatti, S. et al. Peptide functionalized poly(l-lysine)-g-poly(ethylene glycol) on titanium: resistance to protein adsorption in full heparinized human blood plasma. Biomaterials 24, 4949–4958 (2003).
Schuler, M. et al. Biomimetic modification of titanium dental implant model surfaces using the RGDSP-peptide sequence: A cell morphology study. Biomaterials 27, 4003–4015 (2006).
Sanders, C. R. Biomolecular Ligand-Receptor BindingStudies: Theory, Practice, and Analysis. Nashville: Vanderbilt University. 1–43 Available at: http://structbio.vanderbilt.edu/sanders/Binding_Principles_2010.pdf (2010).
Wu, Y., Vendome, J., Shapiro, L., Ben-Shaul, A. & Honig, B. Transforming binding affinities from three dimensions to two with application to cadherin clustering. Nature 475, 510–513 (2011).
Bell, G. I., Dembo, M. & Bongrand, P. Cell adhesion. Competition between nonspecific repulsion and specific bonding. Biophys. J. 45, 1051–1064 (1984).
Riikonen, T., Vihinen, P., Potila, M., Rettig, W. & Heino, J. Antibody against Human α1β1 Integrin Inhibits HeLa Cell Adhesion to Laminin and to Type I, IV, and V Collagens. Biochem. Biophys. Res. Commun. 209, 205–212 (1995).
Oba, M. et al. Cyclic RGD peptide-conjugated polyplex micelles as a targetable gene delivery system directed to cells possessing αvβ 3 and αvβ5 integrins. Bioconjug. Chem. 18, 1415–1423 (2007).
Keselowsky, B. G., Collard, D. M. & García, A. J. Integrin binding specificity regulates biomaterial surface chemistry effects on cell differentiation. Proc. Natl. Acad. Sci. USA 102, 5953–5957 (2005).
Arnold, M. et al. Activation of Integrin Function by Nanopatterned Adhesive Interfaces. ChemPhysChem 5, 383–388 (2004).
Yung-Chi, C. & Prusoff, W. H. Relationship between the inhibition constant (KI) and the concentration of inhibitor which causes 50 per cent inhibition (I50) of an enzymatic reaction. Biochem. Pharmacol. 22, 3099–3108 (1973).
Kapp, T. G. et al. A Comprehensive Evaluation of the Activity and Selectivity Profile of Ligands for RGD-binding Integrins. Sci. Rep. 7, 39805 (2017).
Yamada, K. M. & Kennedy, D. W. Dualistic nature of adhesive protein function: fibronectin and its biologically active peptide fragments can autoinhibit fibronectin function. J. Cell Biol. 99, 29–36 (1984).
Hayman, E. G., Pierschbacher, M. D. & Ruoslahti, E. Detachment of cells from culture substrate by soluble fibronectin peptides. J. Cell Biol. 100, 1948–1954 (1985).
Lee, M. H. et al. Adhesion of MC3T3-E1 cells to RGD peptides of different flanking residues: Detachment strength and correlation with long-term cellular function. J. Biomed. Mater. Res. - Part A 81, 150–160 (2007).
Ruoslahti, E. Rgd and Other Recognition Sequences for Integrins. Annu. Rev. Cell Dev. Biol. 12, 697–715 (1996).
Hynes, R. O. A reevaluation of integrins as regulators of angiogenesis. Nat. Med. 8, 918–921 (2002).
Buckley, C. D. et al. RGD peptides induce apoptosis by direct caspase-3 activation. Nature 397, 534–539 (1999).
Frisch, S. M. Disruption of epithelial cell-matrix interactions induces apoptosis. J. Cell Biol. 124, 619–626 (1994).
Maltese, W. A. & Overmeyer, J. H. Methuosis: Nonapoptotic cell death associated with vacuolization of macropinosome and endosome compartments. Am. J. Pathol. 184, 1630–1642 (2014).
Russo, M. A. et al. A small-molecule RGD-integrin antagonist inhibits cell adhesion, cell migration and induces anoikis in glioblastoma cells. Int. J. Oncol. 42, 83–92 (2013).
Plow, E. F., Haas, T. A., Zhang, L., Loftus, J. & Smith, J. W. Ligand binding to integrins. J. Biol. Chem. 275, 21785–21788 (2000).
Xiong, J.-P. et al. Crystal structure of the extracellular segment of integrin alpha Vbeta3 in complex with an Arg-Gly-Asp ligand. Science 296, 151–155 (2002).
D’Souza, S. E. et al. Ligand and cation binding are dual functions of a discrete segment of the integrin β3 subunit: Cation displacement is involved in ligand binding. Cell 79, 659–667 (1994).
Madsen, H. E. L. et al. Stability Constants of Copper(II), Zinc, Manganese(II), Calcium, and Magnesium Complexes of N-(Phosphonomethyl)glycine (Glyphosate). Acta Chemica Scandinavica 32a, 79–83 (1978).
Subramaniam, V. & Hoggard, P. E. Metal Complexes of Glyphosate. J. Agric. Food Chem. 36, 1326–1329 (1988).
Caetano, M. S., Ramalho, T. C., Botrel, D. F., da Cunha, E. F. F. & de Mello, W. C. Understanding the inactivation process of organophosphorus herbicides: A DFT study of glyphosate metallic complexes with Zn2+, Ca2+, Mg2+, Cu2+, Co3+, Fe3+, Cr3+, and Al3+. Int. J. Quantum Chem. 112, 2752–2762 (2012).
Loomis, W. F., Fuller, D., Gutierrez, E., Groisman, A. & Rappel, W. J.Innate Non-Specific Cell Substratum Adhesion. PLoS One 7 (2012).
Mccafferty, M. H. et al. Normal Fibronectin Levels as a Function of Age in the Pediatric Population. Pediatr. Res. 17, 482–485 (1983).
Hayman, E. G., Pierschbacher, M. D., Suzuki, S. & Ruoslahti, E. Vitronectin—A major cell attachment-promoting protein in fetal bovine serum. Exp. Cell Res. 160, 245–258 (1985).
Maynard, H. D., Okada, S. Y. & Grubbs, R. H. Inhibition of Cell Adhesion to Fibronectin by Oligopeptide-Substituted Polynorbornenes. J. Am. Chem. Soc. 123, 1275–1279 (2001).
Calvete, J. J., Fox, J. W., Agelan, A., Niewiarowski, S. & Marcinkiewicz, C. The presence of the WGD motif in CC8 heterodimeric disintegrin increases its inhibitory effect on alphaII(b)beta3, alpha(v)beta3, and alpha5beta1 integrins. Biochemistry 41, 2014–2021 (2002).
Amann, K. et al. Beneficial effects of integrin avb3-blocking RGD peptides in early but not late phase of experimental glomerulonephritis. Nephrol. Dial. Transplant. 27, 1755–1768 (2012).
Pierschbacher, M. D. & Ruoslahti, E. Cell attachment activity of fibronectin can be duplicated by small synthetic fragments of the molecule. Nature 309, 30–3 (1984).
Yamada, K. M. & Kennedy, D. W. Peptide inhibitors of fibronectin, laminin, and other adhesion molecules: unique and shared features. J. Cell. Physiol. 130, 21–8 (1987).
Knudsen, K. A., Tuszynski, G. P., Huang, T. F. & Niewiarowski, S. Trigramin, an RGD-containing peptide from snake venom, inhibits cell-substratum adhesion of human melanoma cells. Exp. Cell Res. 179, 42–9 (1988).
Gullberg, D., Terracio, L., Borg, T. K. & Rubin, K. Identification of integrin-like matrix receptors with affinity for interstitial collagens. J. Biol. Chem. 264, 12686–12694 (1989).
Ylänne, J. RGD peptides may only temporarily inhibit cell adhesion to fibronectin. FEBS Lett. 267, 43–45 (1990).
Kumar, C. C. et al. Biochemical characterization of the binding of echistatin to integrin αvβ3 receptor. J. Pharmacol. Exp. Ther. 283, 843–853 (1997).
Fang, Y., Ferrie, A. M., Fontaine, N. H., Mauro, J. & Balakrishnan, J. Resonant Waveguide Grating Biosensor for Living Cell Sensing. Biophys. J. 91, 1925–1940 (2006).
Orgovan, N. et al. Bulk and surface sensitivity of a resonant waveguide grating imager. Appl. Phys. Lett. 104, 0–4 (2014).
Motulsky, H. J. & Christopoulos, A. Fitting models to biological data using linear and nonlinear regression. GraphPad Software, Inc., San Diego, CA https://doi.org/10.1002/sim.2181 (2003).
The Authors thank Mrs. Judit Juracsek for her expertise in performing the ELISA integrin binding experiments. The present work was supported by the Hungarian Academy of Sciences [Lendület (Momentum) Program]; the National Research, Development and Innovation Office (NKFIH) [ERC_HU, KH_17 and NVKP_16-1-2016-0049 Programs]; and by the Hungarian Scientific Research Fund (OTKA) [grant number K109865].
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Szekacs, I., Farkas, E., Gemes, B.L. et al. Integrin targeting of glyphosate and its cell adhesion modulation effects on osteoblastic MC3T3-E1 cells revealed by label-free optical biosensing. Sci Rep 8, 17401 (2018). https://doi.org/10.1038/s41598-018-36081-0
- Cell Adhesion Processes
- Glyphosate Molecule
- Molar Surface Density
- Dynamic Mass Redistribution
- Serum-containing Cell Culture Medium
This article is cited by
Scientific Reports (2021)
Single-cell adhesion force kinetics of cell populations from combined label-free optical biosensor and robotic fluidic force microscopy
Scientific Reports (2020)
Glycocalyx regulates the strength and kinetics of cancer cell adhesion revealed by biophysical models based on high resolution label-free optical data
Scientific Reports (2020)
Human primary endothelial label-free biochip assay reveals unpredicted functions of plasma serine proteases
Scientific Reports (2020)