A novel cloning strategy for one-step assembly of multiplex CRISPR vectors

Article metrics


One key advantage of the CRISPR/Cas9 system in comparison with other gene editing approaches lies in its potential for multiplexing. Here, we describe an elaborate procedure that allows the assembly of multiple gRNA expression cassettes into a vector of choice within a single step, termed ASAP(Adaptable System for Assembly of multiplexed Plasmids)-cloning. We demonstrate the utility of ASAP-cloning for multiple CRISPR-mediated applications, including efficient multiplex gene editing, robust transcription activation and convenient analysis of Cas9 activity in the presence of multiple gRNAs.


The possibility of multiplexing is one of the advantageous features of the CRISPR/Cas9 system compared with other gene editing approaches (reviewed by Dominguez et al.1). Due to the increasing demand for multiplex gene targeting, e.g. when modeling complex diseases, there have been a number of reports on sophisticated cloning strategies to generate the required constructs. Besides techniques that adapted Gibson Assembly2,3, several methods that have been used for this purpose derive from Golden Gate cloning4,5,6,7,8,9, featuring multiple advantages but also limitations in comparison to Gibson Assembly-related methods. Golden Gate approaches are usually based on the construction of numerous entry plasmids containing individual DNA fragments that are ultimately used to reconstitute the desired insert. These fragments are flanked by type IIS restriction endonuclease (TIIS-RE) sites and unique single strand overhangs. By undergoing iterations of restriction and ligation, the fragments can be assembled seamlessly in a defined order and inserted into a specific destination vector within one reaction. However, these techniques suffer from the following limitations: the initial step of library construction is i) time-consuming and ii) does not allow for simple subtraction or addition of further inserts and thereby renders the procedure inflexible; iii) previously published techniques rely on specific destination vectors with TIIS-RE sites, making these methods only useful for a defined context.

Here, we report how these limitations can be overcome by a novel strategy advancing key aspects of the original Golden Gate cloning principle. To obviate the preparation of entry plasmids, we designed a “PCR-on-ligation” step for flexible generation of individual insert fragments. Furthermore, elaborate primer design and novel utilization of pairs of isocaudomers (type II restriction enzymes having slightly different recognition sites but producing identical overhangs) allows for ligation of the generated inserts into type II restriction endonuclease (TII-RE) sites in a large variety of common expression vectors, enabling utilization of this technique in a wide range of applications. We demonstrate this utility by constructing different multiplex CRISPR vectors for various downstream applications. Based on these characteristics, this method is termed “ASAP-cloning” (Adaptable System for Assembly of multiplexed Plasmids).


To exemplify the workflow of ASAP-cloning we generated a CRISPR/ Cas9 vector (pX330) with multiple arrayed gRNA sequences as illustrated in Fig. 1a. As a first step, for each individual gRNA expression cassette (GEC), the “PCR-on-ligation” reaction is performed by ligating annealed oligonucleotides, encoding the protospacer complementary region of the gRNA, into the pX330 backbone according to the original Zhang lab protocol10, except that backbones are not dephosphorylated. This allows a nick-free ligation of the DNA backbone and the respective annealed oligonucleotides during the ligation step, generating intact circular plasmids. After incubation with an exonuclease to remove residual non-circular backbones or inserts, these ligation mixes are directly used as the input for subsequent PCRs without further processing. For the respective PCR, primer pairs flanking the entire GEC, comprising the U6 promoter, the gRNA and a transcriptional terminator, are designed. Additionally, on their 5´ends the primers contain specific TIIS-RE sites, analogous to the original Golden Gate protocol (Table 1). Importantly, the use of a phosphorylated backbone and the exonuclease reaction both proved to be crucial for generating specific PCR products from the ligation mix (Figs 1b and S1a). After purification, the PCR products are directly used as insert fragments for the subsequent assembly reaction.

Figure 1

ASAP-cloning allows rapid vector generation for efficient multiplex gene targeting. (a) Workflow of ASAP-cloning. Annealed oligonucleotides, encoding the protospacer complementary region of the gRNA are ligated with the pX330 vector. Subsequently, gRNA expression cassettes (GECs), including the U6 promoter, the gRNA and a transcriptional terminator are amplified directly from the ligation mix. The utilized primers encode for unique restriction enzyme sites that are attached to the GEC during PCR-amplification. In the following assembly reaction, addition of distinct enzymes to cleave GEC overhangs allows to array the respective GECs in a defined order and to insert them into a vector of choice within one process. The only stable plasmid vacant of functional restriction sites during the reaction is the desired product, which is sufficiently enriched after 26 cycles of restriction and ligation. (b) Exonuclease treatment and the use of non-dephosphorylated backbones are crucial for the generation of distinct PCR products. After ligation of annealed oligodinucleotides with either dephosphorylated (−P) or non-dephosphorylated (+P), BbsI-cut pX330 vector, an exonuclease treatment was performed for half of the analyzed ligation mixes. Subsequently, reaction mixes of either the exonuclease treatment (+Exo.) or the ligation (−Exo.) were used as template for a PCR. Annealing temperatures of 62 °C or 70 °C were used, as indicated. (c) Restriction enzyme sites utilized in the construction of pX330-10x. The boxes indicate which DNA molecule was cut with which enzyme and the respective sequence. (d) Efficiency of ASAP-cloning depends on the number of GECs forming the combined insert. Each dot represents an independent cloning approach with the indicated, inserted number of GECs. Bars indicate mean values. Correctness of clones was analyzed via control restriction and Sanger sequencing. “A” indicates the addition of annealed oligonucleotides to the reaction mix. During ASAP-cloning these were inserted into the designated gRNA expression cassette of the original pX330 vector. (e) SURVEYOR assays to determine the frequency of generated indels at targeted loci. Each locus was amplified from control gDNA (left lane) and from gDNA isolated from cells that had been transfected with pX330-10x (right lane). Resulting PCR products were used in SURVEYOR assays. For some loci, control DNA was digested as well, indicating PCR artifacts or endogenous SNVs. In this case, the resulting bands were added to the “undigested” fraction when calculating indel frequencies. Loci for which the SURVEYOR assay did not yield measurable results were sequenced on the MiSeq platform. (f) pX330-10x and pX330-impsc-10x display similar genome editing efficiencies. SURVEYOR assays of the indicated PCR products were performed after isolation of gDNA from untransfected cells (C) or cells that had been transfected with either pX330-10x (P) or pX330-impsc-10x (I). M = GeneRuler 100 bp DNA Ladder.

Table 1 Suitable oligonucleotides for the amplification of gRNA expression cassettes.

To enable Golden Gate cloning into a single TII-RE site in common expression vectors, the first and last TIIS-RE sites of the assembled fragment array are designed to be compatible to the cohesive ends generated by the TII-RE of choice in the destination vector (Fig. 1c). However, this can lead to concatemer formation during restriction-ligation cycles. To prevent this, the insert ends are designed to form a de-novo TII-RE site for an isocaudomer of the TII-RE used to open the destination vector (e.g. XbaI T|CTAGA and NheI G|CTAGC) if ligated to a second insert. The isocaudomer is also added to the reaction and thus simultaneously cleaves any emerging concatemers. Therefore, the one-step assembly and cloning reaction consists of (i) the destination vector, (ii) the insert fragments resulting from the “PCR-on-ligation”, (iii) a TIIS-RE (e.g. BbsI), (iv) a TII-RE for backbone linearization (e.g. XbaI), (v) its isocaudomer for concatemer restriction (e.g. here NheI) as well as (vi) a ligase, and (vii) a specific reaction buffer. This rationally designed combination of reagents ensures that after multiple restriction-ligation cycles, only the desired backbone-insert constructs accumulate (Fig. 1a).

We first demonstrated the feasibility of this approach by introducing multiple GECs into the XbaI site of the pX330 vector. For this purpose, BbsI recognition sites were added to GECs during PCR amplification, and insert concatemers were cleaved by NheI during the subsequent assembly reaction. We successfully integrated up to 9 cassettes simultaneously while keeping a high efficiency of at least 50% positive clones (Fig. 1d). For integrating 10 or more cassettes, we obtained a lower efficiency (below the detection limit) – potentially owing to drastically impaired transformation of larger plasmids (~13 kb with 10 gRNA cassettes). We could show that this system allows to make use of the GEC already encoded on the common pX330 backbone by simply adding a pair of annealed oligonucleotides to the reaction mix (Fig. 1d, lane A and 8 + A). Of note, also reactions in which we omitted NheI yielded the intended vector constructs, although to a markedly reduced efficiency (~58% reduced amount of correct clones). Next, we generated a construct carrying 9 inserted GECs plus the gRNA encoded around the original cloning site, thereby targeting 10 different human genomic loci (“pX330-10 × ”; Supplementary Table 1). After transfection of HEK293T cells with this single vector carrying 10 gRNA expression cassettes, all of the 10 targeted loci displayed indel formation as assessed via Surveyor assay or deep sequencing, respectively (Fig. 1e and Supplementary Table 2). Notably, both the improved7 and original gRNA scaffolds10 used here resulted in similar indel formation efficiencies (Fig. 1f) showing that both scaffolds are suitable for ASAP-cloning-mediated multiplexing in one vector.

We further confirmed these results by Sanger sequencing of 4 of the 10 loci exemplarily and found that 50% (13/26) of the analyzed alleles displayed Cas9-induced indels (Fig. 2a). Intriguingly, two of the targeted loci within the EGFR gene were only 85 bp apart and we detected deletions of the whole intervening DNA segment in four out of six alleles. These deletions also became evident by the occurrence of separate bands after agarose gel electrophoresis of the amplified loci (Supplementary Fig. S1b). This indicates that multiplex gRNA vectors constructed with this method result in a high frequency of deleting larger genomic regions, which is potentially owing to the synchronous expression of both gRNAs in the same cell when delivered on one vector.

Figure 2

Multiplexed vectors constructed by ASAP cloning outperform single plasmids. (a) Sanger sequencing of indicated loci after transfection of HEK293T cells with pX330-10x displays high amount of alleles with frameshifting indels. (b) Illustration of the utilized vectors and the analyzed loci of the following experiments. 2 s = Two separate plasmids encoding gRNAs which target the EGFR.4 and the TP53.2 locus, respectively; 2t = single vector encoding these two gRNA cassettes in tandem; 10 s = Ten separate plasmids with ten different genomic targets including the analyzed loci; 10t = One single tandem vector (pX330-10x) encoding gRNAs to target these ten loci. (c,d) Targeted deep sequencing of the indicated loci after transfection of HEK293T cells with the aforementioned vectors to identify genomic editing events. Deletions encompassing two of the target sites at the EGFR locus being 85 bp apart (EGFR.3 and EGFR.4) were counted and declared as large deletions. Ctrl = untransfected cells; n = 3 (biological replicates). Data are displayed as mean + standard deviation. (e) Allele editing events after transfection of primary glioblastoma cells with the indicated, aforementioned vectors. To account for artificial indels at the analyzed loci, respective mutated allele frequencies of WT cells (0.0144% for TP53.2 and 0.07655% for EGFR.4) were subtracted from mutated allele frequencies of samples. The analyzed loci and the number of delivered gRNAs are depicted in the figure legend. Results of approaches in which separate vectors have been transfected were plotted against tandem approaches. n = 1. P-value ≤ 0.029. The P-value was calculated using a one-sided, paired t-test. (f) HEK293T cells were transfected with pcDNA-dCas9-VP64 vectors in which either one separate gRNA expression cassette (E1, E2, E3, E4 or E5) or all together (E1-5) had been integrated via ASAP-cloning. The respective gRNAs target the promoter region of EGFR. Total RNA was isolated and expression of EGFR was assessed by real-time PCR. The graph indicates the fold change of expression compared to cells that had been transfected with an empty vector. P-values: E1 vs. E1-5 ≤ 0.0017, E2 vs. E1-5 ≤ 0.0014, E3 vs. E1-5 ≤ 0.0086, E4 vs. E1-5 ≤ 0.0039, E5 vs. E1-5 ≤ 0.0043. n = 3 (biological replicates). The data are displayed as mean + SEM.

As a next step, we aimed at exploiting this concept to elucidate the genome editing efficiencies of Cas9 in the presence of multiple gRNAs. We therefore transfected HEK293T cells with four different vector combinations: (i) two separate vectors targeting the EGFR and the TP53 locus, respectively (2 s), (ii) a vector constructed via ASAP-cloning encoding the respective two gRNA cassettes in tandem (2t), (iii) ten separate vectors targeting the two analyzed loci and eight further regions on the genome (10 s), (iv) a single tandem vector to target these ten loci constructed via ASAP-cloning (10t; pX330-10x; Fig. 2b).

Transfection of tandem vectors carrying multiple gRNAs resulted in a trend to higher gene editing efficiencies of the EGFR locus compared to the transfection of separate vectors, likely owing to higher transfection efficiency (Fig. 2c). Of note, we also found that gene editing efficiencies were independent of the presence of further gRNAs, indicating that a vector delivering 10 gRNAs provides a similar gene editing efficiency for a single locus as a vector delivering only the respective single gRNA. Strikingly, the largest fraction of identified gene editing events comprised the previously identified large deletions (Fig. 2a), again indicating that ASAP-cloning can be used to induce synchronous gene editing, fostering the deletion of the intervening region. The targeted TP53 locus displayed an overall high percentage of mutated alleles, although editing rates through delivery of 10 RNA expression cassettes were reduced (Fig. 2d). This may, however, be due to larger genomic deletion events induced by two gRNAs, including a target site only 611 bp away from the analyzed TP53 locus. These larger deletions could not be captured by the PCR product utilized for deep sequencing. We then applied this setup to primary glioblastoma cells that feature major transfection difficulties, resulting in a relatively low overall indel incidence. A detailed analysis of the underlying sequencing reads, however, indicated that the tandem vectors significantly outperformed single gRNA vector mixes (Figs 2e and S2). Thus, delivering multiple gRNA expression cassettes on one vector construct may be generally favorable when targeting more than one locus, particularly in cells that are difficult to transfect.

As a final proof of concept, we sought to demonstrate that this method is applicable also to other vectors and restriction enzyme combinations. Table 2 provides an overview of the utilized backbones and enzymes. We introduced either one or five GECs into the pcDNA-dCas9-VP64 vector commonly used for transcriptional activation. All of the gRNAs targeted a distinct region between 56 bp and 283 bp upstream of the transcriptional start site of the EGFR gene to elevate EGFR expression. After transfection of HEK293T cells, we found increased EGFR expression in all samples. This effect was significantly greater, however, in the cells that had been transfected with the vector carrying five multiplexed gRNA expression cassettes (Fig. 2f).

Table 2 Enzymes utilized in ASAP-cloning for multiplex GEC integration into indicated vectors.


Over the last decade, the CRISPR/Cas9 system became one of the most popular and versatile tools in the field of molecular biology. To cope with the increasing demand for multiplexed and high throughput genome editing approaches, we here devised a strategy enabling rapid and flexible construction of the required plasmids, termed ASAP-cloning. In comparison to some earlier reports, which were based on distinct destination vectors and required the prior purchase of defined plasmids or plasmid libraries4,5,6,7, ASAP-cloning allows the utilization of many commonly available vectors as destination backbones, thereby enabling a variety of applications. For example, recently published vectors carrying certain Cas9 variants or dCas9 fusions can be used to implement gRNA expression cassettes to efficiently generate “all-in-one” vectors11,12. This utility is achieved by a newly devised combination of elaborately constructed primers and a set of restriction enzymes. Besides a TIIS RE, which constitutes the basis of Golden Gate cloning approaches, ASAP-cloning makes use of an enzyme cutting the chosen vector and of a related isocaudomer. This allows to integrate a custom DNA fragment into a common TII-RE site, however, it is a prerequisite that an isocaudomer of the RE opening the vector exists. While this is the case for most common restriction enzymes, it is also important to verify that none of the utilized enzymes cut at unwanted sites within the backbone or any of the inserts. Especially for larger plasmids with many incidental RE sites, finding a fitting set of restriction enzymes may pose a limitation. However, especially for gRNA-expression vectors that don’t encode unwanted sites of the TIIS-RE intended for gRNA cloning, finding a suitable enzyme combination is likely.

Furthermore, so far multiple rounds of cloning were often needed to generate the desired vectors, which required up to 2 weeks of time4,5,6,7. To circumvent this, ASAP-cloning implements a novel “PCR-on-ligation” step, which allows to complete the entire procedure within a single day. The use of PCR fragments as building blocks for gateway cloning approaches has been described13, however, to our knowledge this has not previously been adapted to freshly ligated gRNA expression cassettes and thereby to CRISPR/Cas9-related approaches. Although PCR-products as building blocks for Golden Gate approaches allow saving a tremendous amount of time, it is also important to mention that, in comparison to plasmid libraries, their use requires sequencing of the insert within the final construct due to potential PCR-induced errors. However, this does not necessarily pose a limitation as modern PCR polymerases work with high fidelity making PCR-induced errors extremely rare, and commercially available sequencing services are barely more expensive and time-consuming than control digestions. Furthermore, we could show that the use of an exonuclease and a non-dephosphorylated backbone allows the use of a shortly incubated ligation mix as template for a PCR, which provided the means to generate PCR products of custom gRNA expression cassettes within a few hours. Of note, our system thereby also allows to rapidly generate additional gRNA expression cassettes that can be integrated into previously constructed arrays, providing an unequaled flexibility in comparison to earlier published techniques.

Using ASAP-cloning, we efficiently constructed multiplexed vectors by arraying up to 9 GECs. Attempts to multiplex 10 or more GECs within one approach resulted in a drastically decreased cloning efficiency. This maximum of 9 inserts was in line with earlier publications describing Golden Gate-related cloning techniques4,14.

When we assessed Cas9 genome editing efficiencies in the presence of multiple gRNAs, we found that genome editing rates of each analyzed locus remain stable even when up to 9 additional, different gRNAs were present. This indicates that genome editing of multiple loci does not influence the editing potential of a single, given locus within a cell. However, further investigations will be needed to fully elucidate potential limitations of approaches using more that 10 gRNAs or limited amounts of Cas9 protein. Additionally, we could show that genome editing of multiple loci is generally more efficient if the respective gRNAs had been delivered on one vector, highlighting the potential of ASAP-cloning for simultaneous gene editing.

We then performed ASAP-cloning with a plasmid that encodes a Cas9-VP64 fusion construct and gRNAs targeting the EGFR promoter to elevate EGFR transcription. We found that transcription was most prominently elevated when Cas9-VP64 was recruited to the EGFR promoter by multiple gRNAs simultaneously. This is in line with similar findings reported in earlier publications15,16,17. Thus, vector construction provided by ASAP-cloning also allows to robustly and effectively elevate transcription of target genes.

Ultimately, an important characteristic of ASAP-cloning in contrast to previously described techniques is that it is not specifically tailored for CRISPR/Cas9 approaches. The basic strategy that allows arraying of multiple DNA fragments into a common TII-RE site is readily adaptable to other settings. Thus, in the future, ASAP-cloning might also be used for complex cloning approaches such as the combination of genetic elements for transgene expression or the reconstruction of large genes that cannot easily be amplified via PCR.


Vector construction by ASAP-cloning

Please refer to the Supplementary Methods section for a detailed ASAP-cloning protocol.

For the construction of a pX330 vector carrying an improved gRNA scaffold18 (“pX330-impsc”) the following DNA fragment was synthesized (Integrated DNA Technologies, Leuven, Belgium):


Subsequently, the original pX330 vector was digested with BbsI and KpnI and the synthesized DNA fragment was digested with BsmbI and KpnI. Both fragments were purified via the QiaQuick gel extraction kit (Qiagen) and ligated. The resulting vector, pX330-impsc, was utilized in all ASAP-clonings if not stated otherwise.

Cell culture

HEK293T cells were cultured in IMDM (Thermo Fisher) supplemented with 10% fetal bovine serum (ATCC), 2mM L-Glutamine (Thermo Fisher) and 10 mg/ml penicillin/streptomycin. One day before transfection, 2 × 105 HEK 293 T cells were seeded in six-well dishes containing 2 ml culture medium per well. 2.5 µg of plasmid vector were transfected using Lipofectamine 3000 (Thermo Fisher) according to the manufacturer’s instructions. Three days post transfection, cells were harvested and cell pellets were directly used in subsequent assays or frozen at −20 °C.


DNA was isolated with the QiaAMP DNA Mini Kit (Qiagen) at 3 days post transfection of vectors encoding the respective CRISPR nucleases. The potentially disrupted locus was amplified using locus specific primers and PRECISOR polymerase in GC-buffer (BioCat). PCR products were purified using either the QiaQuick gel extraction kit (for PCR products including unspecific products) or the QiaQuick purification kit. Heterodimerization and digestion with SURVEYOR nuclease were performed with the SURVEYOR Mutation Detection Kit (Transgenomic) according to the manufacturer’s instructions. The cleavage products were separated on a 2% agarose gel and stained with ethidium bromide for 10 min. Images were captured with the Gel Doc system (Bio-Rad). Band intensities were quantified via ImageJ. Gene modification levels were calculated using the following equation19:

$$ \% \,{\rm{genes}}\,{\rm{modified}}=(1-{(1-{\rm{fraction}}{\rm{cleaved}})}^{0.5})\times 100$$

Sanger sequencing

DNA was isolated as described before. The respective loci were amplified using locus specific primers, which were also utilized in SURVEYOR assays. The PCR products were separated on a 2% agarose gel, stained with ethidium bromide for 10 min and analyzed with the Gel Doc system (Bio-Rad). Subsequently PCR-products of tumor tissue were cloned into pJET1.2 (Thermo Scientific). Plasmids of 6–10 colonies per analyzed locus were subjected to sequencing with an ABI PRISM 7900HT Sequence Detection System (Applied Biosystems). Alternatively sequencing was performed by GATC Biotech, Konstanz, Germany.

Real-time PCR

RNA was isolated from cell pellets using the RNeasy Mini kit (Qiagen). cDNA was synthesized using SuperScriptII reverse transcriptase (Thermo Fisher) according to the manufacturer’s instructions. The qPCR reaction was performed using SYBR Green (Thermo Fisher). Amplification and signal detection was performed using the ABI PRISM 7900HT System (Applied Biosystems). As housekeeping genes Gapdh and Mldha were amplified. All samples were measured in three technical replicates. The median CT value of these replicates was used for the following calculation:

$$\frac{{2}^{{\rm{\Delta }}C{T}_{Egfr}(control-sample)}}{{2}^{{\rm{\Delta }}C{T}_{housekeeper}(control-sample)}}=fold\,change$$

Each experiment was performed in biological triplicates, using both housekeeping genes as controls. Thereby, 6-fold changes for each sample were obtained. The mean of these was used as final value. P-values were calculated using the 6 values for fold changes via a one-sided t-test assuming unequal variances.

Targeted deep sequencing

DNA was isolated as described above. The region of interest was PCR-amplified using locus specific primer pairs and PCR products were purified with the QIAquick PCR Purification Kit (Qiagen). After library preparation, barcoded sequencing was performed using the Illumina MiSeq platform, yielding over 1.2 million 251 bp paired-end reads per sample. Reads were aligned to human 1000genomes phase 2 reference genome (hs37d5) combined with phiX174 reference genome (NC_001422.1) using BWA-MEM20 (v0.7.8) with –T 0. For downstream analysis we filtered BAM files with SAMtools21 (v1.2) using following flags: -F 4 -F 2048 -q 30, which denote mapped reads excluding supplementary alignments, and with mapping quality of at least 30. Extraction of reads corresponding to a given locus and a specific primer pair PCR product within each sequenced sample was based on the leftmost mapping position of reads for all loci except for TP53, which due to primer design and TP53 being on the minus strand required the rightmost mapping position to be calculated from CIGAR string excluding adapter sequences. Finally, insertions and deletions affecting or originating within any of the 6 bases (+/− 3 bp from the Cas9 cut site) were quantified for each locus using a standalone script analyzing CIGAR strings of individual reads, combined with SA tag information in cases where it was present and when the beginning or the end of the read were soft clipped. In those cases, only reads having chimeric segments with mapping quality of 60 were retained. SA tag information was additionally used for quantification of large deletions in cases with two Cas9 cut sites and where both of the sites were affected. Final counting and normalization by total reads per sequenced locus was performed using only non-redundant read names in order to avoid biases due to overlapping mates, so that finally the number of DNA fragments with or without an event was considered.


  1. 1.

    Dominguez, A. A., Lim, W. A. & Qi, L. S. Beyond editing: repurposing CRISPR-Cas9 for precision genome regulation and interrogation. Nat Rev Mol Cell Biol 17, 5–15, https://doi.org/10.1038/nrm.2015.2 (2016).

  2. 2.

    Breunig, C. T. et al. One step generation of customizable gRNA vectors for multiplex CRISPR approaches through string assembly gRNA cloning (STAgR). PloS one 13, e0196015, https://doi.org/10.1371/journal.pone.0196015 (2018).

  3. 3.

    Xing, H. L. et al. A CRISPR/Cas9 toolkit for multiplex genome editing in plants. BMC plant biology 14, 327, https://doi.org/10.1186/s12870-014-0327-y (2014).

  4. 4.

    Sakuma, T., Nishikawa, A., Kume, S., Chayama, K. & Yamamoto, T. Multiplex genome engineering in human cells using all-in-one CRISPR/Cas9 vector system. Scientific reports 4, 5400, https://doi.org/10.1038/srep05400 (2014).

  5. 5.

    Vad-Nielsen, J., Lin, L., Bolund, L., Nielsen, A. L. & Luo, Y. Golden Gate Assembly of CRISPR gRNA expression array for simultaneously targeting multiple genes. Cellular and molecular life sciences: CMLS, https://doi.org/10.1007/s00018-016-2271-5 (2016).

  6. 6.

    Merenda, A. et al. A Protocol for Multiple Gene Knockout in Mouse Small Intestinal Organoids Using a CRISPR-concatemer. Journal of visualized experiments: JoVE, https://doi.org/10.3791/55916 (2017).

  7. 7.

    Lowder, L. G. et al. A CRISPR/Cas9 Toolbox for Multiplexed Plant Genome Editing and Transcriptional Regulation. Plant Physiology 169, 971–985, https://doi.org/10.1104/pp.15.00636 (2015).

  8. 8.

    Engler, C., Kandzia, R. & Marillonnet, S. A one pot, one step, precision cloning method with high throughput capability. PloS one 3, e3647, https://doi.org/10.1371/journal.pone.0003647 (2008).

  9. 9.

    Kabadi, A. M., Ousterout, D. G., Hilton, I. B. & Gersbach, C. A. Multiplex CRISPR/Cas9-based genome engineering from a single lentiviral vector. Nucleic acids research 42, e147, https://doi.org/10.1093/nar/gku749 (2014).

  10. 10.

    Cong, L. et al. Multiplex Genome Engineering Using CRISPR/Cas Systems. Science 339, 819–823, https://doi.org/10.1126/science.1231143 (2013).

  11. 11.

    Hilton, I. B. et al. Epigenome editing by a CRISPR-Cas9-based acetyltransferase activates genes from promoters and enhancers. Nature biotechnology 33, 510–517, https://doi.org/10.1038/nbt.3199 (2015).

  12. 12.

    Jinek, M. et al. RNA-programmed genome editing in human cells. eLife 2, e00471, https://doi.org/10.7554/eLife.00471 (2013).

  13. 13.

    Sanjana, N. E. et al. A Transcription Activator-Like Effector (TALE) Toolbox for Genome Engineering. Nature protocols 7, 171–192, https://doi.org/10.1038/nprot.2011.431 (2012).

  14. 14.

    Engler, C. & Marillonnet, S. Golden Gate cloning. Methods in molecular biology (Clifton, N.J.) 1116, 119–131, https://doi.org/10.1007/978-1-62703-764-8_9 (2014).

  15. 15.

    Maeder, M. L. et al. CRISPR RNA-guided activation of endogenous human genes. Nature methods 10, 977–979, https://doi.org/10.1038/nmeth.2598 (2013).

  16. 16.

    Perez-Pinera, P. et al. RNA-guided gene activation by CRISPR-Cas9-based transcription factors. Nature methods 10, 973–976, https://doi.org/10.1038/nmeth.2600 (2013).

  17. 17.

    Cheng, A. W. et al. Multiplexed activation of endogenous genes by CRISPR-on, an RNA-guided transcriptional activator system. Cell research 23, 1163–1171, https://doi.org/10.1038/cr.2013.122 (2013).

  18. 18.

    Chen, B. et al. Dynamic imaging of genomic loci in living human cells by an optimized CRISPR/Cas system. Cell 155, 1479–1491, https://doi.org/10.1016/j.cell.2013.12.001 (2013).

  19. 19.

    Guschin, D. Y. et al. A rapid and general assay for monitoring endogenous gene modification. Methods in molecular biology (Clifton, N.J.) 649, 247–256, https://doi.org/10.1007/978-1-60761-753-2_15 (2010).

  20. 20.

    Li, H. et al. Aligning sequence reads, clone sequences and assembly contigs with BWA-MEM. arXiv 1303, 3997v1 (2013).

  21. 21.

    Li, H. et al. The Sequence Alignment/Map format and SAMtools. Bioinformatics (Oxford, England) 25, 2078–2079, https://doi.org/10.1093/bioinformatics/btp352 (2009).

Download references


We thank the Genomics Core Facility of the DKFZ for library preparation and sequencing on the MiSeq platform. This work has been supported by the Helmholtz Alliance Preclinical Comprehensive Cancer Center [grant number HA-305] and by e:Med:Sys-Glio [grant number 031A425A].

Author information

J.G. and M.Zu. conceived the strategy. J.G. and P.L. supervised the project. M.Zu. and H.Y. performed the experiments. M.H. and M.Za. performed bioinformatics analyses. J.G., M.Zu., P.L. and D.T.W.J. wrote the manuscript. All authors read and approved the final manuscript.

Correspondence to Marc Zuckermann or Peter Lichter.

Ethics declarations

Competing Interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Supplementary Information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.