The coffee berry borer is the most devastating insect pest of coffee throughout the world. The insect spends most of its life cycle inside the coffee berry, which makes it quite difficult to observe its behaviour. Micro-computed tomography (micro-CT) was used to observe all developmental stages of the coffee berry borer inside coffee berries (Coffea canephora). An interesting oviposition pattern involving a sequential placement of eggs starting in the periphery of the seed and moving inwards was observed. Micro-CT should be useful in elucidating unknown life history aspects of other seed-feeding bark beetles as well as of bark and ambrosia beetles in general.
Two coffee species constitute the bulk of coffee trade worldwide: Coffea arabica L. and Coffea canephora Pierre ex. A. Froehner (also known as robusta coffee). Coffee production is an important source of employment and revenue for coffee-producing countries and the 2012 estimated value for the worldwide coffee industry was US$173 billion1. A major constraint to coffee production is the damage caused by insect pests and plant pathogens2. Even though many insect species have been reported attacking coffee plants3, only one insect, the coffee berry borer (Hypothenemus hampei (Ferrari); Coleoptera: Curculionidae: Scolytinae), has specialized on consuming and reproducing in the seeds inside the berry, making it the most economically important insect pest of coffee worldwide4.
The coffee berry borer is a cryptic insect, i.e., females spend most of their life cycle inside coffee berries and males are born and die inside the berry. This particular aspect of the insect’s biology makes it difficult to study its behaviour and quite difficult to control. The life cycle begins when an adult female, referred to as the colonizing female, emerges from an infested berry and bores a hole into another berry, usually through an area known as the disc, which was originally the floral disc of the flower. The female enters the seed and builds galleries, where she oviposits. The emerging larvae consume the seed and once females reach the adult stage, they mate with their siblings4. Males are smaller than females, have vestigial wings and rudimentary eyes, and as mentioned above, they never leave the berry4. Their main role in life is mating.
A recently-developed technique useful in studying the behaviour of the coffee berry borer involves artificial diet sandwiches, consisting of artificial coffee berry borer diet5 placed between two glass plates, followed by introducing insects and sealing the plates6. This technique has shown that the insect exhibits subsocial behaviour6. Because observing the development and behaviour of the insect in intact berries is impossible, the use of an X-ray-based technology known as micro-computed tomography (micro-CT) is ideal to learn more about the insect’s life history inside the berry. The first high resolution CT study on plants was published in 20037 and in the intervening 15 years the technique has become frequently used in plant and insect-related studies. Micro-CT has also been used to observe the coffee bean weevil (Araecerus fasciculatus (De Geer); Coleoptera: Anthribidae) inside the coffee berry8. This insect has been reported inside coffee berries on a handful of occasions and is best known as a stored product pest of many agricultural products8. In addition, a preliminary micro-CT report of coffee berry borers inside the berry has been published9.
In this paper, we present results of observations of two coffee berry borer-infested coffee berries using the micro-CT technique. In one of the berries (berry 1) we observed several developmental stages while the second berry (berry 2) had just been colonized by an adult female, and only two batches of eggs had been oviposited.
Figures 1–3 show different views of one of two coffee berry borer-infested coffee berries (berry 1) observed with micro-CT technology. Several components of the berry have been identified, including the disc, pedicel, endocarp (parchment), mesocarp (mucilage), spermoderm (silver skin), locule wall (ovary), and coffee embryo.
Figure 1a (berry 1) depicts a meso-sagittal cut of a coffee berry showing the two coffee seeds separated by the locule wall, as well as the galleries and pupal cells created by the insect. We use the term “pupal cell” as used by Hopkins10, Swaine11, Dodge12, and Browne13, to describe the enclosed chamber where pupation occurs (Figs 1–3). According to Hopkins10, “The pupal cell is formed by the prepupal larva or by the pupa itself and is usually located at the end of the larval mine or food burrow of the larva.” The pupal cells observed inside the coffee berry were formed by the second larval instar, a developmental stage that includes the prepupa14. This observation agrees with Bergamin15, who stated the coffee berry borer prepupa is responsible for building the pupal cell.
Figures 1–3 (berry 1) show different section planes through a coffee berry with the location of the different development stages, including the colonizing female. The coffee berry has been made transparent (Fig. 1b) to focus on the insect galleries and pupal cells and on the entrance hole, which is the area through which the coffee berry borer enters the berry, although in this berry the insect entered through the side of the berry, close to the petiole. Figure 1c depicts a meso-sagittal cut that includes the developmental stages of the insect in different colors, with the components of the berry digitally removed in Fig. 1d to focus on the distribution of the insects within the seed. It is important to note that only one seed has been infested by the insects.
Figure 2 (berry 1) shows oblique-lateral and oblique-apical sectional views. In Fig. 2a, the insects have been digitally removed to focus on the galleries, pupal cells, and the entrance hole. A detail of the entrance hole with the colonizing female in blue is shown in Fig. 2c, next to an incomplete hole. In Fig. 2d,f the coffee berry and its components have been made transparent to focus on the entrance hole, galleries, pupal cells (Fig. 2d) and on the different development stages (Fig. 2f). The colonizing female has moved throughout various areas of the seed, ovipositing in an interesting pattern, discussed below.
Figure 3 (berry 1) is a meso-sagittal cut depicting a volume rendered coffee berry bored-infested coffee berry cut at the opposite side of the berry shown in Fig. 1. In Fig. 3b,d the coffee berry and its components have been made transparent to focus on the galleries bored by the insect (Fig. 3b) and on the different developmental stages of the insect (Fig. 3d). In Fig. 3a,b the insects have been removed by software to show details of the galleries. Figure 3c shows the different development stages of the insect within the galleries and pupal cells.
Figure 4 (berry 1) presents two volume rendered images of 26 larva, 12 pupae, and eight eggs, with each one individually identified. This image and Supplementary Video S1 revealed that the placement of the three developmental stages appeared to have a pattern. The minimal distance (mm) of the eggs, larvae, and pupae to the surface of the berry is presented in Fig. 5. The location of each developmental stages was significantly different based on a Kruskal-Wallis test (chi-square 11.009, df = 2, p = 0.004), with eggs being further from the surface, followed by larvae, and pupae (means: 2.70, 1.83, and 1.25 mm, respectively).
Figure 6 (berry 1) is a volume rendered image reconstruction of the entrance hole bored by the colonizing female shown in the previous figures, with two bifurcating galleries at different rotation angles (b-f). In Fig. 6a, the insect has been digitally removed to show details of the bifurcating galleries. A similar pattern in a different berry (berry 2) is shown in Fig. 7 and Supplementary Video S2, which depicts a second coffee berry borer-infested coffee berry (berry 2) observed with micro-CT. This berry had been recently infested by a colonizing female based on the presence of eggs and no larvae or pupae. The two egg batches reveal an oviposition pattern similar to that reported for the first berry (Figs 4 and 5). In this case (Fig. 7; berry 2), one egg batch is 2.0 mm from the surface of the berry (hypothetically, this would be the first batch of eggs) and the other batch is 3.7 mm (hypothetically, the second batch), respectively.
Several bark beetle species from different genera are known to attack seeds, among these, Araptus, Coccotrypes, Hypothenemus, Pagiocerus, and Scolytodes13,16,17. Not much is known about the life history of these bark beetle species inside the seed, including the distribution of eggs as well as the shape of the galleries.
Our visualization of coffee berry borers inside the coffee berry using micro-CT reveals the advantages of using this technology to increase our knowledge on the life history of the insect. For example, the distribution of the developmental stages of the insect at different distances from the surface of the berry suggests that the colonizing females starts ovipositing close to the seed periphery and oviposition then moves inwards, towards the center of the seed. This might be a strategy to disperse the progeny in order to reduce competition. It is important to emphasize that this is purely speculative at this moment and that additional micro-CT observations of coffee berry borer-infested berries are needed to determine if this oviposition pattern holds.
Figures 1–3 show that the insects are only feeding on one of the two coffee seeds, although as the insect population increases, it can be expected for insects as well as the colonizing female to move to the second seed based on the extremely high number of eggs that can be found inside one berry, e.g., 16418 and 28819. At the time of analysis, the berry depicted in Figs 1–3 contained 47 insects, including the colonizing female.
Of the various developmental stages shown in Fig. 4, there are eight unhatched eggs (Fig. 4b, Supplementary Video S1) that were oviposited in an area of the seed that is opposite the original batch of eggs resulting in the larvae and pupae seen in Fig. 4a. One of the eggs is in the distal area of the berry, close to the disc (Figs 1–4). This reveals that the colonizing female does not necessarily place all the eggs in one location. Even though we don’t know if these eight eggs would end-up hatching, it is safe to state that there was 100% hatching in the two previous egg batches resulting in 26 larvae and 12 pupae, as there are no eggs unaccounted for. There are no reports assessing egg fertility inside coffee berries as dissection of a berry with subsequent assessment of hatchability might not be reliable due to the drastic changes in microhabitat experienced by the dissected eggs. Therefore, this is another area that can be further explored using micro-CT.
The two egg batches in Fig. 7 resemble Browne’s13 description of Coccotrypes, which as mentioned above, also feeds on seeds: “In fruit and seeds the eggs are placed at the end of a short tunnel, and the larvae enlarge this and also make other irregular tunnels and chambers in all directions.” Figure 7 also depicts alternating angles in the gallery following the entrance hole.
Adult coffee berry borer females emerge from the berry using the entrance hole built by the colonizing female. Similarly, “In Anisandrus and Xyleborus… the brood matures and emerges by way of the entrance gallery”12. This is interesting because there is a highway of tunnels and cavities that the new adults have to transit through in order to find the entrance hole, although it is possible that they might use visual cues (e.g., light) and air currents to locate it.
Several papers describe the different types of galleries created by bark beetles10,11,12,20,21. Hopkins10 states that even though different bark beetle genera can make the same or similar type of gallery, “galleries are of taxonomic importance” and the same insect species will construct the same or similar type of gallery in different hosts, thus the shape of the gallery is not determined by the host plant. There are no studies focused on gallery formation by seed boring bark beetles; this fact presents an opportunity to use micro-CT to study gallery form and function in seeds.
As a footnote, in a proceedings paper presenting our preliminary results9, we had stated that a female could be seen grooming an egg. After more detailed analysis including visualization at different angles, it became evident that the female was not grooming the egg and instead had her mouthparts in the proximity of rasped seed material.
In conclusion, the use of micro-CT techniques to study the coffee berry borer has resulted in interesting observations. Future research will expand on these observations to determine if they are the norm. Micro-CT could also be useful for learning more about the cryptic life of other bark beetles, including ambrosia beetles.
J.A.T. collected coffee berries (Coffea canephora Pierre ex. A. Froehner; Rubiaceae) at a coffee plantation in Vietnam (Me Linh Coffee Garden; 11°53′57.39′′ N, 108°20′51.16′′ E; 1043 masl) in November 2017. Out of 55 C. canephora berries collected in the field, 12 (22%) were infested with the coffee berry borer. Seven berries (13%) had the insect entrance hole on the disc or very close to it. Five berries (9%) had the entrance hole in the petiole area: two were at a 45° angle through the petiole, and three were next to the petiole. None of the berries had more than one entrance hole and only one had an incomplete hole next to a complete entrance hole.
The berries were kept at room temperature in the laboratory at the University of Granada and were mounted on Basotect® (a light weight melamine foam manufactured by BASF) placed inside a plastic container. A few drops of ethyl acetate were placed on the Basotect® and the plastic container was closed. The emanating vapors produced by the chemical quickly immobilize and kill the insect. Following a 30 min period, micro-CT observations were initiated using a Bruker SkyScan 1172 microtomograph (Bruker-micro CT, Kontich, Belgium) with a Hamamatsu L702 X-ray source and a Ximea 11 megapixels camera. The setting parameters were as follows: voltage = 48 KV; current = 124 µA; isotropic voxel size = 3.25 µm (except for Fig. 7 and Supplementary Video S2, which were 6.7 µm); image rotation step = 0.3° (except for Fig. 7 and Supplementary Video S2, which were 0.2°); 360° of rotation scan, and an Al 0.5 mm filter, resulting in two overlapping connected scans with scan durations of 2 h:20 min:40 s for berry 1 and 1 h:24 min:58 s for berry 2. The most recent versions of the Bruker micro-CT’s Skyscan software (NRecon, DataViewer, CTAnalyser) were used for primary reconstructions and the “cleaning” process to obtain the datasets of “slices” as previously described22. Volume rendered images and videos were obtained with FEI’s Amira’s software v. 6.5.023 (Thermo Fisher Scientific, Waltham, MA).
The datasets generated and analyzed during the course of the study are available from J.A.T. upon reasonable request.
ICO. International Coffee Organization. World coffee trade (1963–2013): a review of the markets, challenges and opportunities facing the sector. International Coffee Organization, London, ICC 111-5 Rev. 1, 29 pp, http://www.ico.org/news/icc-111-5-r1e-world-coffee-outlook.pdf (2014).
Waller, J. M., Bigger, M. & Hillocks, R. J. eds. Coffee Pests, Diseases and Their Management. (CABI, 2007).
Le Pelley, R. H. Pests of Coffee (Longmans, Green and Co., Ltd., 1968).
Vega, F. E., Infante, F. & Johnson, A. J. The genus Hypothenemus, with emphasis on H. hampei, the coffee berry borer in Bark Beetles: Biology and Ecology of Native and Invasive Species (eds Vega, F. E. & Hofstetter, R. W.) 427–494 (Academic Press 2015).
Vega, F. E., Kramer, M. & Jaramillo, J. Increasing coffee berry borer (Coleoptera: Curculionidae: Scolytinae) female density in artificial diet decreases fecundity. Journal of Economic Entomology 104, 87–93 (2011).
Vega, F. E., Simpkins, A., Rodríguez-Soto, M. M., Infante, F. & Biedermann, P. H. W. Artificial diet sandwich reveals subsocial behavior in the coffee berry borer Hypothenemus hampei (Coleoptera: Curculionidae: Scolytinae). Journal of Applied Entomology 141, 470–476 (2017).
Alba-Alejandre, I., Alba-Tercedor, J. & Vega, F. E. Micro-CT to document the coffee bean weevil, Araecerus fasciculatus (Coleoptera: Anthribidae), inside field-collected coffee berries (Coffea canephora). Insects 9(3), 100 (2018).
Stuppy, W. H., Maisano, J. A., Colbert, M. W., Rudall, P. J. & Rowe, T. B. Three-dimensional analysis of plant structure using high-resolution X-ray computed tomography. Trends in Plant Science 8, 2–6 (2003).
Alba-Tercedor, J., Alba-Alejandre, I. & Vega, F. E. Micro-CT unveils the secret life of the coffee berry borer (Hypothenemus hampei; Coleoptera, Curculionidae: Scolytinae) inside coffee berries. Bruker Micro-CT User Meeting, April 16–19, 2018, Ghent, Belgium, pp. 165–173, https://www.bruker.com/fileadmin/user_upload/8-PDF-Docs/Microtomography/UserMeeting/2018_30.pdf (2018).
Hopkins, A. D. Contributions toward a monograph of the scolytid beetles. II. Preliminary classification of the superfamily Scolytoidea. United States Department of Agriculture, Bureau of Entomology, Technical Bulletin 17, 165–232 (1915).
Swaine, J. M. Canadian bark-beetles. Part II. A preliminary classification, with an account of the habits and means of control. Dominion of Canada, Department of Agriculture, Entomological Branch Bulletin 14, 1–143 (1918).
Dodge, H. R. The bark beetles of Minnesota (Coleoptera: Scolytidae). University of Minnesota, Agricultural Experiment Station, Technical Bulletin 132, 1–60 (1938).
Browne, F. G. The African species of Poecilips Schaufuss. Revue de zoologie et de botanique africaines 87, 679–696 (1973).
Gómez, J., Chávez, B. Y., Castillo, A., Valle, F. J. & Vega, F. E. The coffee berry borer, Hypothenemus hampei: How many instars are there? Annals of the Entomological Society of America 108, 311–315 (2015).
Bergamin, J. Contribuição para o conhecimento da biologia da broca do café “Hypothenemus hampei (Ferrari, 1867)” (Col. Ipidae). Arquivos do Instituto Biologico (São Paulo) 14, 31–72 (1943).
Schedl, K. E. Insectes nuisibles aux fruits et aux graines. Publications de l’institut national pour l’étude agronomique du Congo Belge, Série Scientifique 82, 1–133 (1960).
Wood, S. L. Bark and Ambrosia Beetles of South America (Coleoptera, Scolytidae). (Brigham Young University, 2007).
Leefmans, S. De Koffiebessenboeboek. II. Bestrijding. Mededeelingen van het Instituut voor Plantenziekten 62, 1–99 (1924).
Jaramillo, J., Chabi-Olaye, A., Poehling, H.-M., Kamonjo, C. & Borgemeister, C. Development of an improved laboratory production technique for the coffee berry borer Hypothenemus hampei, using fresh coffee berries. Entomologia Experimentalis et Applicata 130, 275–281 (2009).
Blackman, M. W. Mississippi bark beetles. Mississippi Agricultural Experiment Station, Technical Bulletin 11, 1–130 (1922).
Browne, F. G. The biology of Malayan Scolytidae and Platypodidae. Malayan Forest Records 22, 1–255 (1961).
Alba-Tercedor, J. From the sample preparation to the volume rendering images of small animals: A step by step example of a procedure to carry out the micro-CT study of the leafhopper insect Homalodisca vitripennis (Hemiptera: Cicadellidae). Bruker Micro-CT Users Meeting, May 5–8, 2014, Ostend, Belgium, pp. 260–288, available from the author (2014).
FEI. Amira 6.5.0 – 3D Data Visualization and Analysis Software, https://www.fei.com/WorkArea/DownloadAsset.aspx?id=34359741676 (2018).
Special thanks to Roger Beaver, Bjarte H. Jordal and three anonymous reviewers for comments on an earlier version of this manuscript, and to Aaron P. Davis for identifying the locule wall. J.A.T. is especially indebted to Alexander Sasov, Stephan Boons, Xuan Liu, Vladimir Kharitonov, Kjell Laperre and Wesley De Boever at Bruker microCT Systems for their support, patience and effectiveness, and for their constant improvements to the software, including new options we requested. Also, to Kathy Tinoco (Thermo Fisher Scientific) for her help with Amira software, and to Alejandra Sanchez-Erostegui. We thank the personnel at the Me Linh Coffee Garden coffee plantation in Vietnam for their hospitality during J.A.T.’s visit. This paper benefitted from sub-award agreement S15192.01 between Kansas State University (KSU) and the University of Granada, as a part of the USDA-NIFA Award 2014-70016-23028 to Susan J. Brown (KSU), “Developing an Infrastructure and Product Test Pipeline to Deliver Novel Therapies for Citrus Greening Disease” (2015–2020). A preliminary view of the possibilities that micro-CT offers to study the coffee berry borer inside coffee berries was presented at the Bruker Micro-CT User Meeting, April 16–19, 2018, Ghent, Belgium9.
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Alba-Alejandre, I., Alba-Tercedor, J. & Vega, F.E. Observing the devastating coffee berry borer (Hypothenemus hampei) inside the coffee berry using micro-computed tomography. Sci Rep 8, 17033 (2018). https://doi.org/10.1038/s41598-018-35324-4
- Coffee Berry Borer
- Hypothenemus Hampei
- Bark Beetle
- Pupal Cells
This article is cited by
Biological and infestation studies on Araecerus fasciculatus DeGeer a new pest of Melia azadirach L. in India
International Journal of Tropical Insect Science (2022)
Coffee pest severity by agrometeorological models in subtropical climate
International Journal of Biometeorology (2022)
Revealing the respiratory system of the coffee berry borer (Hypothenemus hampei; Coleoptera: Curculionidae: Scolytinae) using micro-computed tomography
Scientific Reports (2019)
Observing the devastating coffee berry borer (Hypothenemus hampei) inside the coffee berry using micro-computed tomography
Scientific Reports (2018)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.