Curvature components derived from satellite gravity gradients provide new global views of Earth’s structure. The satellite gravity gradients are based on the GOCE satellite mission and we illustrate by curvature images how the Earth is seen differently compared to seismic imaging. Tectonic domains with similar seismic characteristic can exhibit distinct differences in satellite gravity gradients maps, which points to differences in the lithospheric build-up. This is particularly apparent for the cratonic regions of the Earth. The comparisons demonstrate that the combination of seismological, and satellite gravity gradient imaging has significant potential to enhance our knowledge of Earth’s structure. In remote frontiers like the Antarctic continent, where even basic knowledge of lithospheric scale features remains incomplete, the curvature images help unveil the heterogeneity in lithospheric structure, e.g. between the composite East Antarctic Craton and the West Antarctic Rift System.
The GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) satellite mission of the European Space Agency measured from 2009 to 2013 satellite gravity gradients at mean orbit heights of 255 and 225 km in the nominal and extended mission phases respectively. GOCE measurements fill a crucial gap in the spectral range between higher altitude missions, such as the GRACE mission, and near-surface measurements1. Since the end of the mission, a number of studies have exploited the GOCE datasets for different purposes. From the GOCE measurements that provided four gradient components with high accuracy in the measurement bandwidth, all six gradients have been computed in a Local North-Oriented Frame including GRACE information2. The LNOF gradients are a compromise between ease of access/application and maintaining as much as possible the original GOCE information. Keeping the initial gradient information is not necessarily the same as calculating gradients from global gravity field models, as in the latter the resolution of the gravity field model does affect the resolution of the gradients. This has been discussed and demonstrated in regional3 as well as global applications2. Applications include the use of the GOCE gravity data to estimate crustal thickness4,5,6,7, to model the structure of the lithosphere8,9 or to investigate deeper mantle sources10. Some of these studies demonstrated the additional sensitivity to the lateral sources distribution when using gravity gradients as compared to the conventional, vertical gravity field2,11. As typical for modelling and interpretation of the gravity field or its gradients, additional, constraining information is required, which is often provided from seismic or seismological models in form of a priori constraints. While the uncertainty in such models can affect the interpretation of gravity gradients12, the simultaneous use of all gradients makes one less prone to such errors13.
Still, the simultaneous interpretation of multiple gravity gradient components is particularly challenging. This is a well-known limitation e.g. in the interpretation of airborne gravity gradients for exploration14. Approaches like the use of third-order derivatives yield promising results15, but do not reduce the complexity in interpretation. Here, we adopt, therefore, recent advancements in the use of curvature components of the tensor that simplify the interpretation of gravity gradient datasets significantly and are directly making use of the second derivatives of the gravitational potential16,17. We apply these approaches to the GOCE satellite gravity data to derive the first global maps of the curvature components. Our curvature analysis is carried out after applying topographic and isostatic corrections, and this further enhances both lithospheric and intra-crustal sources (see the Methods section for details). Overall, we show that the curvature components of GOCE have significant potential for augmenting seismological imaging of the Earth’s lithosphere, e.g. to aid investigations of different cratonic regions, and for studying the lithosphere of the least understood continent on Earth, Antarctica.
Curvature components at GOCE satellite altitude
Figure 1 shows the main curvature components and for comparison the vertical gravity gradient at satellite height of 225 km. In all components, the oceanic and continental domains are clearly differentiated. Within the continental areas the main tectonic elements, such as cratons and their boundaries and major orogenic belts are clearly imaged. The mean curvature shows the same features as the vertical gradient, as expected (see formula in the Methods section). The minimum and maximum curvature, however, illustrate the internal structure of the continents and oceans more clearly than the vertical gravity gradient. For example, internal differences within the continents are more readily apparent in the maximum curvature.
The more detailed structure within the continents is even better illustrated in the shape index shown in Fig. 2a. The values of the shape index can be expressed as dome- to bowl-like structures that the equipotential surface follows as an expression of a mass surplus or deficit at depth17. Bowl-shaped mass deficits correlate, in general, with orogenic belts and cratonic areas. For example, in the continental US, the cratonic core features a smaller mass deficit compared to the Cordillera in the west. This is expected, as for orogenic belts isostatic support in form of a crustal root is often observed (see also Himalaya). In contrast, mountain ranges associated with recent subduction zones like the Andes feature valley-like shape index structures, likely due to the mass surplus of the subducting slabs.
Notably, our new curvature products and especially the shape index vary quite significantly between individual cratons. Cratons are the oldest part of the continental crust and their seismological signatures are in general relatively similar, as expressed in the tectonic regularisation18 and crustal thickness maps19 (Fig. 2b,c).
A more detailed look at the crustal thickness shows that the cratons have similar, and despite the generally low topography, large crustal thickness. To explain this mismatch the concept of isopycnicity has been proposed in the late 1970 s20 and is still discussed today21. Isopycnicity explains the mismatch by a change in upper mantle composition and that the lithospheric mantle is lighter due to depletion of iron-rich elements. The seismic velocities mostly reflect the relatively cold temperature of the lithospheric mantle, less the depletion of the cratonic lithosphere22.
In the shape index, we can observe bowl- to valley- to flat-type areas over the cratons. While the West African and Kaapvaal Craton feature a bowl-shaped anomaly, the Congo Craton appears as a valley to almost flat-like area, and the Eastern European Platform is generally seen as a flat area. The differences in the shape index must be explained by density sources in the crust and/or the underlying uppermost mantle and are more sensitive to composition than temperature. The observed different shape index values imply substantial differences in the lithospheric build-up between such cratons. More indirectly, this behaviour has been previously discussed between the Slave and Kaapvaal Craton23.
Another example is the Congo Craton, for which dynamic support from the upper mantle has been proposed24. In this case, a lithospheric, viscous anomaly might lead to the apparent mass deficit compared to the surrounding cratons and modification of the old cratonic lithosphere by sub-lithospheric sources and processes has also been proposed recently25. The general high sensitivity to lithospheric sources and considerably lower sensitivity to deeper sources could point to processes like magmatic underplating modifying the crust. An example for this is the East European Craton, where the lowermost crust features unusual high seismic velocities and densities26. Such an anomalous lowermost crust is not observed for the Kaapvaal Craton and this is confirmed by the differences in the shape index.
GOCE-derived products have been previously used to discuss the tectonic setting of Africa, but using the free-air or Bouguer-anomalies and residuals thereof, but not directly the gradient products27,28. In these studies, a regression analysis was performed to remove the contributions to the gravity field by topography and isostasy, enhancing tectonic features in the residuals. Such analysis reveals more local scale features and allows to discuss the possible mass changes associated with magmatic intrusions, sedimentary basins and other features mostly within the upper crust. Our analysis differs from these studies as here we focus on the broader tectonic setting of the continents as curvature components at satellite height image the main building blocks of the continental lithosphere. This in turn helps us to identify differences in the lithospheric characteristics, which in combination with seismology, helps unravel the underlying causes for the differences between apparently similar continental domains, such as cratons.
Curvature components over the Antarctic continent
The lithospheric structure of most continents is relatively well understood, at least in terms e.g. of basic knowledge regarding the extent of cratons, orogens, major rifts, and intracratonic basins, and the location of subduction and collision zones. However, comparable knowledge is still lacking for parts of the Antarctic continent, in spite of its global importance within the supercontinent cycle since the Archaean29 and the key influence that its lithosphere exerts on the overlying ice sheets30. The thick ice sheet cover and the remoteness of Antarctica make geological and geophysical investigations particularly challenging. Hence, Hdespite the large extent of recent aeromagnetic31 and aerogravity data coverage32, a continental-scale tectonic elements map that is required to aid global plate reconstructions33 remains to be defined.
Here, we exploit our curvature products to aid ongoing investigations of the crustal and lithospheric architecture of Antarctica (Fig. 3). The most striking feature is the contrast between the thicker crust of the composite East Antarctic craton (40–60 km thick) and the thinner crust in West Antarctica (20–35 km thick), as imaged from both passive seismic34 and airborne gravity studies35. The Transantarctic Mountains formed along the lithospheric boundary between East and West Antarctica36, and despite being underlain by a small crustal root37, appear as a strong negative anomaly in the minimum curvature (Fig. 3). This suggests that an upper mantle thermal anomaly (leading to relatively lower densities) likely contributes to their isostatic support, as proposed from recent passive seismic investigations38.
To focus more on the internal structure of the continent, we discuss in the following isostatic corrected curvature components. In the isostatic corrected shape index (Fig. 3), the coastal area from Marie Byrd Land to Ellsworth Land features an alternation of positive and negative anomalies. Most notably, under Marie Byrd Land a bowl-like shape index is observed in the region of a proposed Cenozoic mantle plume39. While the shape index does not per se confirm the presence of a mantle plume, the anomaly supports the hypothesis for relatively lower density upper mantle beneath the Marie Byrd Land dome. We infer that this is likely linked to a thermal upper mantle anomaly independently proposed from seismic tomography40. Both the topographically corrected minimum and maximum curvature maps (Fig. 3 and Supplementary Material) reveal the continental-scale extent of the Cretaceous West Antarctic Rift System41 and the older Jurassic Weddell Sea Rift System42. However, narrower Cenozoic subglacial rift basins that are superimposed upon the broader region of extension in the West Antarctic Rift System, which are well resolved by airborne gravity, are not imaged by the satellite gravity data due to its spatial resolution (~80 km half-wavelength).
The interior of East Antarctica is thought, based on aeromagnetic and satellite magnetic interpretation, to be a mosaic of Precambrian cratonic provinces and orogenic belts of ill-constrained and yet hotly debated age and origin29,43. In the curvature products (and especially in the topographic and isostatic corrected shape index) interior East Antarctica appears to include at least three major heterogeneous lithospheric domains. One correlates with the Mawson Craton, which included also large parts of southern Australia prior to Gondwana break-up44, while the second corresponds to the region of the inferred Tonian Oceanic Arc Superterrane, in the interior of Dronning Maud Land45. These domains appear to be separated by the region of the Gamburtsev Subglacial Mountains, where the crust is up to 60 km thick, and an orogenic belt of inferred ca. 1 Ga43 or ca 550 Ma age34 has been proposed. The origin of the third domain, apparently lying between the Weddell Sea and South Pole, and its relation with the Mawson Craton remains unclear. This poorly explored region includes the so-called Polar Gap south of 83°S, where GOCE data are not available (due to the inclination of the satellite orbit) and hence lower resolution GRACE data are used instead. These three distinct domains are not apparent in currently available seismic tomography34 and represent an important new element to study Antarctica in relation to global plate tectonic reconstructions, both before and after the break-up of Gondwana (see Supplementary Material for an illustration).
Conclusions and Outlook
Curvature products derived from GOCE data provide a new tool to help distinguish different lithospheric domains and their tectonic boundaries, at both continental and global scale. By revealing differences and similarities with respect to seismological results, our study shows the potential for further integrated analysis, especially in trying to decipher the build-up of the cratonic regions of the Earth. This goes beyond earlier studies that used the GOCE derived products to discuss tectonic domains and the internal crustal structure. Although these studies were able to identify tectonic structures, our analysis indicates that the characteristics of the lithosphere can differ even in apparently similar tectonic regimes. They can show quite different characteristics in the gravity gradients, while the seismic velocity structure is similar. Geochemical and petrological information is certainly a key to help understand these differences, but there are still intrinsic limitations due the paucity of available xenolith samples46.
In our current contribution, the analysis remains qualitative, but to advance towards a better understanding of the nature of the crust and mantle, the specific characteristics of the satellite gravity gradients should be exploited further. Potential theory demands that the internal consistency of the gradients has to be adhered. As these have different sensitivities to the source geometry, that can be used for example in probabilistic joint inversion schemes. While inversion of gravity gradients does not overcome the limitations of non-uniqueness, it will certainly limit the solution space.
Due to their resolution of 80 km, the satellite gravity gradients provide a tool to link global and large-scale regional studies in a more consistent manner. Such models based on the integration of different geophysical observables are a necessary step before advancing into detailed, local interpretation for which higher-resolution data as available from aerogeophysical or terrestrial measurements.
For Antarctica, which still stands out as the least understood continent on Earth, it is clear that the new GOCE curvature and shape index products have considerable potential towards further elucidating the heterogeneity in lithospheric architecture beneath the Antarctic ice sheets. The satellite gravity curvature and shape index products for Antarctica and other continents can be incorporated in plate reconstructions. This can help towards re-evaluating both the similarities and differences in lithospheric structure and sub-lithospheric processes between formerly adjacent continents, prior and after supercontinent break-up.
Overall, we emphasise that satellite data such as from the GOCE mission, provide novel datasets with a global homogenous coverage that can significantly advance our understanding of the Earth structure and tectonic setting.
GOCE data and corrections
The satellite gravity gradients (SGG) at satellite altitude of the GOCE satellite mission are given for gradient grids at 225 km above the Earth’s surface in a local north-oriented reference frame, NWU (North, West, Up), which is the convention adopted for GOCE2.
We performed a topographic correction using the ETOPO147, supplemented by Bedmap248 for the Antarctic region. Both datasets contain information on topography, bathymetry, and ice. Subsequently, rock, water, and ice masses are separately modelled with respective densities of 2670 kg m−3, 1030 kg m−3, and 917 kg m−3 (Fig. 4).
To evaluate the signal content in the SGG, we also calculated the effect of the isostatic compensation and removed this effect from the topographic reduced fields49. For the onshore areas, an Airy-type crustal isostatic model is used, which is a sufficient approximation for long wavelengths. In oceanic areas, lateral variations of density exist in the oceanic lithosphere, which we approximate by assuming Pratt-type isostasy.
Our reference model has no topography and a crustal thickness of c = 30 km. The applied density contrast between crust and mantle is 400 kg m−3 49.
All calculations are done with tesseroids50. A tesseroid is a volume element defined on a sphere. When a density is assigned to a tesseroid, one can compute its gravitational potential, gravity and gravity gradients.
Curvature describes how much a line deviates from being straight or a surface from being flat17. Unlike the first-order derivative methods for delineation of lineaments, curvature contains the added dimension of shape. For a 3D surface, curvature is also independent of the surface orientation.
From theory, many curvature attributes can be computed. Curvature has been widely used to interpret geophysical data after the introduction of 11 curvature attributes, which have been selected based on their applicability to seismic interpretation51. Only a small number are independent from each other and rarely more than the original 11 attributes and the differential curvature are applied to geophysical data17. The full mathematical background, tests with synthetic data and an evaluation of these attributes for airborne gravity gradients can be found in17.
When curvature is used to interpret gravity anomalies, we try to delineate geometric information of subsurface structures from an observed non-geometric quantity.
The mean curvature is found with the following expression:
The mean curvature is a function of two gradient components TNN and TWW in derivation. It can be expressed as a function of TUU as well because of Laplace’s equation.
The second attribute is Gauss curvature. With the same procedure, this is defined as:
The Gaussian curvature is the product of minimum and maximum curvatures and often exhibits rapid sign changes. These two attributes are not particularly useful17, but they can be used to compute many of the other components. Two of those are minimum and maximum curvature, which can be expressed as:
Or in terms of gravity gradients:
Maximum and minimum curvature can be combined in a different way to compute the shape index:
This shape index is a quantitative description of the shape of the local morphology and is not affected by the absolute magnitude of curvature.
The shape index that allows a more quantitative shape description and its amplitude is always within +/−1: bowl (−1), valley (−0.5), flat (0.0), ridge (−0.5), and dome (−1). These characteristic numbers are derived and work perfectly for geometric surfaces51,52.
Two remarks have to be made: First, the gravity gradients are not absolute values, but they are gravity gradient anomalies. Hence the term curvature should be substituted by a definition as ‘curvature perturbation’ or ‘anomaly of an equipotential surface’17. To avoid ambiguity, the term curvature is used here in the sense of ‚ a curvature perturbation’.
As a second point, some of the curvature attributes contain the gravity g in the denominator. When using the gravity disturbance, this would result in singularity for a gravity anomaly of zero or small values. To prevent this, g has to be weighted with a positive scaling summand. The value of the summand is not that relevant, as long as it is greater than the maximum topographic corrected gravity disturbance. If g changes, the qualitative value of the curvature will also change, but the amplitude of the resulting curvature remains unaffected. For convenience, the scaling summand is the maximum value of absolute gravity at satellite height, which is 914180 mGal (9.1418 m s−2).
Tectonic regularisation and crustal thickness map
The tectonic regularisation map in Fig. 2 was computed by the authors18 from the model SL2013sv using the k-means clustering. For this, they utilized the very large phase- and group-velocity dataset created in the course of the construction of their global tomographic model SL2013sv22, as well as the model itself. SL2013sv offers increased resolution globally, approaching that of regional-scale studies. The vertical-component data set used to compute consists of almost three quarters of a million waveform fits, from which more than half a million of the most mutually-consistent seismograms were selected to constrain the model.
The crustal thickness map in Fig. 2 is from the global model Crust1.019 with 1 × 1 degree lateral resolution. The model is based on an extensive seismic catalogue, but uses a crustal age map53 to predict crustal thickness in areas not well covered by seismic measurements.
Plate-tectonic illustration in supplementary material
The movie in the supplementary material provides an example for the last 200 Myr of plate tectonics centred over Antarctica. The movie illustrates by the use of the topographic reduced shape index the link between Antarctica and the adjacent continents. The plate-tectonics illustration was done in GPlates (https://www.gplates.org/).
The curvature components data are available under https://www.3dearth.uni-kiel.de.
Pail, R. et al. Combined satellite gravity field model GOCO01S derived from GOCE and GRACE. Geophysical Research Letters 37, L20314 (2010).
Bouman, J. et al. Satellite gravity gradient grids for geophysics. Scientific reports 6, 21050, https://doi.org/10.1038/srep21050 (2016).
Eicker, A., Schall, J. & Kusche, J. Regional gravity modelling from spaceborne data: case studies with GOCE. Geophys. J. Int. 196, 1431–1440, https://doi.org/10.1093/gji/ggt485 (2013).
Reguzzoni, M. & Sampietro, D. GEMMA: an earth crustal model based on GOCE satellite data. Int. J. Appl. Earth Obs. Geoinf. 35, 31–43 (2015).
Uieda, L. & Barbosa, V. C. F. Fast nonlinear gravity inversion in spherical coordinates with application to the South American Moho. Geophys. J. Int. 208(1), 162–176 (2017).
van der Meijde, M., Julià, J. & Assumpcao, M. Satellite gravity derived Moho for South America. Tectonphysics 609, 456–467 (2013).
Sampietro D., Reguzzoni M. & Braitenberg C. The GOCE estimated Moho beneath the Tibetan Plateau and Himalaya. In: Rizos C., Willis P. (eds), Earth on the Edge: Science for a Sustainable Planet. International Association of Geodesy Symposia, 139, 391–397 (2013).
Fullea, J. et al. Perturbing effects of sub-lithospheric mass anomalies in GOCE gravity gradient and other potential field data modelling: application to the Atlantic-Mediterranean transition zone. International Journal of Applied Earth Observation and Geoinformation 35, 54–69 (2015).
Tondi, R., Gilardoni, M. & Reguzzoni, M. The combined inversion of seismological and GOCE gravity data: New insights into the current state of the Pacific lithosphere and upper mantle. Tectonophysics 705, 101–115 (2017).
Panet, I. et al. Mapping the mass distribution of Earth’s mantle using satellite-derived gravity gradients. Nat. Geosci. 7, 131–135, https://doi.org/10.1038/ngeo2063 (2014).
Martinec, Z. Mass-density Green’s functions for the gravitational gradient tensor at different heights. Geophys. J. Int. 196, 1455–1465, https://doi.org/10.1093/gji/ggt495 (2014).
Ebbing, J., Bouman, J., Fuchs, M., Gradmann, S. & Haagmans, R. Sensitivity of GOCE gravity gradients to crustal thickness and density variations: case study for the Northeast Atlantic Region. In Marti, U., editor, Gravity, Geoid and Height Systems 41, 291–298, https://doi.org/10.1007/978-3-319-10837-7_37 (2014).
Holzrichter, N. & Ebbing, J. A regional background model for the Arabian Peninsula from modelling satellite gravity gradients and their invariants. Tectonophysics, https://doi.org/10.1016/j.tecto.2016.06.002 (2016).
Pilkington, M. Analysis of gravity gradiometer inverse problems using optimal design measures. Geophysics 77(2), G25–G31 (2012).
Pitoňák M., Šprlák M. & Tenzer R. Possibilities of inversion of satellite third-order gravitational tensor onto gravity anomalies: a case study for Central Europe. Geophysical Journal International, https://doi.org/10.1093/gji/ggx041 (2017).
Cevallos, C., Kovac, P. & Lowe, S. J. Application of curvatures to airborne gravity gradiometry data in oil exploration. Geophysics 78(4), G81–G88 (2013).
Li, X. Curvature of a geometric surface and curvature of gravity and magnetic anomalies. Geophysics 80(1), G15–G26 (2015).
Schaeffer, A. J. & Lebedev, S. Global heterogeneity of the lithosphere and underlying mantle: A seismological appraisal based on multimode surface-wave dispersion analysis, shear-velocity tomography, and tectonic regionalization. Invited Review in: “The Earth’s Heterogeneous Mantle,” A. Khan and F. Deschamps (eds), 3–46, Springer Geophysics (2015).
Laske, G., Masters, G., Ma, Z. & Pasyanos, M. Update on CRUST1.0 - A 1-degree Global Model of Earth’s Crust, Geophys. Res. Abstracts, 15, Abstract EGU2013-2658 (2013).
Jordan, T. H. Structure and formation of the continental tectosphere. J. Petrol. 1, 11_37 (1988).
Eaton, D. W. & Perry, H. K. C. Ephemeral isopycnicity of cratonic mantle keels. Nature Geoscience 6, 967–970 (2013).
Schaeffer, A. J. & Lebedev, S. Global shear speed structure of the upper mantle and transition zone. Geophysical Journal International 194(1), 417–449 (2013).
Jones, A. G., Evans, R. L. & Eaton, D. W. Velocity–conductivity relationships for mantle mineral assemblages in Archean cratonic lithosphere based on a review of laboratory data and Hashin–Shtrikman extremal bounds. Lithos 109, 131–143 (2009).
Downey, N. J. & Gurnis, M. Instantaneous dynamics of the cratonic Congo basin. Journal Of Geophysical Research 114, B06401, https://doi.org/10.1029/2008JB006066 (2009).
Hu, J. et al. Modification of the Western Gondwana craton by plume–lithosphere interaction. Nature Geosciences, https://doi.org/10.1038/s41561-018-0064-1 (2018).
Korsman, K. et al. The GGT/SVEKA Transect: Structure and evolution of the continental crust in the Paleoproterozoic Svecofennian Orogen in Finland. Int. Geol.Rev. 41, 1287–1333 (1999).
Braitenberg C. A Grip on Geological Units with GOCE. In: Marti U. (eds), Gravity, Geoid and Height Systems. International Association of Geodesy Symposia, 141, 309–317 (2014)
Braitenberg, C. Exploration of tectonic structures with GOCE in Africa and across continents. International Journal of Applied Earth Observation and Geoinformation 35, 88–95 (2015).
Harley, S. L., Fitzsimons, I. C. W. & Zhao, Y. Antarctica and supercontinent evolution: historical perspectives, recent advances and unresolved issues. Geological Society London Sp. Publ. 383, 1–34 (2013).
Bingham, R. G. et al. Inland thinning of the West Antarctic Ice Sheet steered along subglacial rifts. Nature 487, 468–471 (2012).
Golynsky A. et al. New Magnetic Anomaly Map of the Antarctic. Geophysical Research Letters, https://doi.org/10.1029/2018GL078153 (2018).
Scheinert, M. et al. New Antarctic Gravity Anomaly Grid for Enhanced Geodetic and Geophysical Studies in Antarctica. Geophysical Research Letters, https://doi.org/10.1002/2015GL067439 (2016).
Torsvik, T & Cocks, R. Earth History and Palaeogeography. Cambridge University Press (2016).
An, M. et al. S-velocity model and inferred Moho topography beneath the Antarctic Plate from Rayleigh waves. Journal of Geophysical Research: Solid Earth 120(1), 359–383 (2015).
Jordan, T.A. et al. Aerogravity evidence for major crustal thinning under the Pine Island Glacier region (West Antarctica). Geol. Soc. Am. Bull., https://doi.org/10.1130/B26417.1 (2010).
ten Brink, U. & Stern, T. Rift flank uplifts and Hinterland Basins: Comparison of the Transantarctic Mountains with the Great Escarpment of southern Africa. J. Geophys. Res. Solid Earth 97, 569–585 (1992).
Studinger, M., Bell, R. E., Buck, W. R., Karner, G. D. & Blankenship, D. D. Sub-ice geology inland of the Transantarctic Mountains in light of new aerogeophysical data. Earth Planet. Sci. Lett. 220, 391–408 (2004).
Brenn, G. R., Hansen, S. E. & Park, Y. Variable thermal loading and flexural uplift along the Transantarctic Mountains, Antarctica. Geology 45(5), 463–466 (2017).
Seroussi, H., Ivins, E. R., Wiens, D. A. & Bondzio, J. Influence of a West Antarctic mantle plume on ice sheet basal conditions. JGR-Solid Earth, https://doi.org/10.1002/2017JB014423 (2017).
Lloyd, A.J. et al. A seismic transect across West Antarctica: Evidence for mantle thermal anomalies beneath the Bentley Subglacial Trench and the Marie Byrd Land Dome. J. Geophys. Res. Solid Earth, https://doi.org/10.1002/2015JB012455 (2015).
Siddoway, C. S. Tectonics of the West Antarctic Rift System: new light on the history and dynamics of distributed intracontinental extension. In: Antarctica: A Keystone in a ChangingWorld. National Academies Press, 91–114 (2008).
Jordan, T. A., Ferraccioli, F. & Leat, P. T. New geophysical compilations link crustal block motion to Jurassic extension and strike-slip faulting in the Weddell Sea Rift System of West Antarctica. Gondwana Research 42, 29–48 (2017).
Ferraccioli, F. et al. East Antarctic rifting triggers uplift of the Gamburtsev Mountains. Nature 479, 388–392 (2011).
Aitken, A. R. A. et al. The subglacial geology of Wilkes Land, East Antarctica. Geophysical Research Letters, https://doi.org/10.1002/2014GL059405 (2014)
Jacobs, J. et al. Two distinct Late Mesoproterozoic/Early Neoproterozoic basement provinces in central/eastern Dronnning Maud Land, East Antarctica: the missing link, 15–21°E. Precambrian Res. 265, 249–272 (2015).
Artemieva, I. The continental lithosphere: Reconciling thermal, seismic, and petrologic data. Lithos 109, 23–46 (2009).
Amante, C. & Eakins, B. W. ETOPO1 1 Arc-Minute Global Relief Model: Procedures, Data Sources and Analysis. NOAA Technical Memorandum, https://doi.org/10.7289/V5C8276M (2009).
Fretwell, P. et al. Bedmap2: Improved ice bed, surface and thickness datasets for Antarctica. The Cryosphere 7(1), 375–393 (2013).
Szwillus, W., Ebbing, J. & Holzrichter, N. Considerations of the importance of far-field topography and isostatic corrections for regional density modelling. Geophysical Journal International 207, 274–287 (2016).
Grombein, T., Seitz, K. & Heck, B. Optimized formulas for the gravitational field of a tesseroid. J. Geodesy 87, 645–660, https://doi.org/10.1007/s00190-013-0636-1 (2013).
Roberts, A. Curvature attributes and their application to 3D interpreted horizons. First Break 19(2), 85–100 (2001).
Chopra, S. & Marfurt, K. J. Seismic attributes for prospect identification and reservoir characterization: SEG Geophysical Developments Series, 11, SEG/EAGE (2007).
Artemieva, I. M. & Mooney, W. D. Thermal thickness and evolution of Precambrian lithosphere: A global study. J. Geophys. Res. 106, 16387–16414 (2001).
This work was supported by the European Space Agency (ESA) as part of the Support to Science Elements GOCE + Antarctica and 3D Earth.
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Ebbing, J., Haas, P., Ferraccioli, F. et al. Earth tectonics as seen by GOCE - Enhanced satellite gravity gradient imaging. Sci Rep 8, 16356 (2018). https://doi.org/10.1038/s41598-018-34733-9
- Gravity Field And Steady-state Ocean Circulation Explorer (GOCE)
- Satellite Gravity Gradients (SGG)
- West Antarctic Rift System
- Curvature Components
Rendiconti Lincei. Scienze Fisiche e Naturali (2020)
Journal of African Earth Sciences (2020)
Earth-Science Reviews (2020)
Strain and retrogression partitioning explain long-term stability of crustal roots in stable continents