Fibrillar collagens have mechanical and biological roles, providing tissues with both tensile strength and cell binding sites which allow molecular interactions with cell-surface receptors such as integrins. A key question is: how do collagens allow tissue flexibility whilst maintaining well-defined ligand binding sites? Here we show that proline residues in collagen glycine-proline-hydroxyproline (Gly-Pro-Hyp) triplets provide local conformational flexibility, which in turn confers well-defined, low energy molecular compression-extension and bending, by employing two-dimensional 13C-13C correlation NMR spectroscopy on 13C-labelled intact ex vivo bone and in vitro osteoblast extracellular matrix. We also find that the positions of Gly-Pro-Hyp triplets are highly conserved between animal species, and are spatially clustered in the currently-accepted model of molecular ordering in collagen type I fibrils. We propose that the Gly-Pro-Hyp triplets in fibrillar collagens provide fibril “expansion joints” to maintain molecular ordering within the fibril, thereby preserving the structural integrity of ligand binding sites.
The dominant protein components of the extracellular matrix are ordered fibrillar collagens. These collagens must provide well-defined binding sites for many matrix proteins and cell-adhesion receptors, exemplified here by integrins. These same collagen fibrils also constitute the main mechanical component of the extracellular matrix, constantly subjected to local forces from adherent cells, which induce local collagen molecular movements likely to disrupt collagen–ligand bindings. How the collagen molecular and fibrillar structures are able to fulfil at first sight contradictory ligand binding and mechanical roles is an important question for both biology and materials scientists developing biomimetic implant materials.
Fibrillar collagens are triple-helical proteins and, with the exception of their short N- and C-terminal telopeptides, consist entirely of G-X-Y (or Gly-Xaa-Yaa) triplet repeats where X is most commonly the cyclic imino acid, proline, and Y, hydroxyproline (O/Hyp), a post-translational modification of proline1,2,3,4. The hydroxylation of a Yaa position P, occurring immediately after synthesis of the collagen precursors, causes the resulting O ring to strongly favour the exo conformation (ring Cγ pointing away from the residue C=O group), which in turn pre-organises the peptide chain structure at the O residues towards the polyproline II helix that is required in each strand of the collagen triple helix; thus, GPO triplets in collagens are widely viewed as being essential for triple helix folding and stabilizing the triple helix structure5,6.
The X-position P rings (PX) in GPO triplets of short model collagen peptides occupy metastable structures, and endo and exo ring conformations (Fig. 1) are almost equally favoured at biologically-relevant temperatures. Endo and exo conformations have significantly different backbone geometry, and, moreover, flipping between them occurs on a nanosecond timescale7. Proline rings in purified collagen preparations are also dynamic on a nanosecond timescale8,9,10,11,12,13,14; in native hard and soft tissues, both backbone dynamics15,16 and proline flipping dynamics17 are still retained. Taken together, these data suggest that native collagen GPO triplets are actually flexible, rather than rigid, structural regions. The high GPO triplet abundance in native collagen sequences led us to speculate that GPO PX flexibility could be key to allowing collagen to simultaneously provide essential mechanical properties and structurally well-defined protein binding sites for their biological roles.
Results and Discussion
Proline(X) rings are flexible in biologically-derived samples
A significant source of PX flexibility arises from ring flipping between endo and exo conformations. Solid-state NMR spectroscopy provides an accurate method for assessing the distribution of collagen proline ring endo-exo conformations in intact tissues. In previous work, we utilised the 13C chemical shift of proline Cγ to determine the distribution of proline PX ring endo-exo conformations in model collagen peptides7. There, we deduced that the collagen GPO PX 13C shift is about 24 ppm for the endo conformation, and 25.7 ppm for the exo conformation. Proline rings in crystalline proline18 and in model collagen peptides7 rapidly flip between endo and exo conformations at room temperature and above, while by measuring dipolar coupling order parameters in native collagen, proline rings have been shown to undergo greater angular fluctuations17 compared to glycine and hydroxyproline13. Rapid PX ring flipping means that the observed 13Cγ isotropic shift is a population-weighted average of the endo and exo conformation 13Cγ chemical shifts, allowing the endo:exo population ratios for PX rings to be determined from the population-weighted average shift7. In our previous work, we have demonstrated the presence of rapid endo-exo flips for proline rings in model collagen-like peptides containing the GPO/POG motif at room and physiological temperatures, and our simulations indicate that these puckering motions are coupled to the backbone motion of the triple helix. In the present work, we look for evidence of similarity in proline conformation dynamics between model peptides and more biologically-relevant samples to extend our findings to native collagen fibrils in the extracellular matrix.
Resolving the GPO proline 13Cγ signals for model collagen peptides where specific 13C labelling is readily achieved is straightforward. However, resolving this signal in intact tissue samples is not as easy; at natural 13C abundance, the 13C NMR spectrum of an intact collagenous tissue contains signals from all amino acid residues, including collagen GPY triplets, where Y is any residue not hydroxyproline (O), as well as the GPO proline signals of interest. Here we use 13C, 15N-enriched mouse bone and in vitro sheep osteoblast matrix, both generated as described previously19,20, as models for fibrillar collagen type I in intact tissues. 1D NMR spectra of all samples reported in this manuscript can be found in Supplementary Fig. S2.
Isotopic enrichment is necessary to use two-dimensional 13C NMR spectroscopy for resolving the proline 13Cγ chemical shift distributions in these intact tissues through 13C-13C double-quantum–single quantum (DQ-SQ) correlation spectra. In this type of spectrum, pairs of strongly dipolar-coupled (i.e. spatially close) 13C nuclei give signals in the double-quantum spectrum at the sum of the chemical shifts for the two 13C nuclei. These DQ signals are correlated in the other spectral dimension with the normal (single) quantum 13C NMR spectrum for the respective pair of 13C nuclei. Horizontal slices through the DQ-SQ correlation spectra thus yield one-dimensional 13C spectra of pairs of spatially close carbon nuclei. 2D 13C DQ-SQ spectra from three 13C, 15N-labelled collagen/collagen-like samples are shown in Fig. 2 for comparison: mouse bone, cultured osteoblast matrix and a model triple-helical collagen peptide, ((GPO)5(G*P*O)(GPO)5)3, where * indicates a U-13C, 15N-labelled residue (in each and every chain of the triple helix). As Fig. 2 shows, the connectivity of bonded carbons in the proline ring can be traced out in the DQ-SQ spectrum. By comparison with the signal connectivities in the model peptide spectrum, we can make straightforward assignment of collagen proline PX signals in the 13C, 15N-labelled mouse bone and in vitro matrix spectra.
We then need to separate 13C signals from PX in general GPY triplets, where Y ≠ O (233 per collagen triple helix) from those in GPO triplets (103 per triple helix) in the mouse bone collagen DQ-SQ spectrum. We utilise the fact the 13C signals from PX in GPO triplets are subject to the proline effect21,22, which manifests as a 1–2 ppm reduction in 13C chemical shift for Cα, Cβ and C′ for residues that precede an imino acid, as in the case of PX in GPO triplets, where PX precedes Hyp/O, but not for PX in GPY triplets. The GPO PX Cα-Cβ correlation in the bone DQ-SQ spectrum can be distinguished from the corresponding GPY PX correlation using this criterion, as indicated in Fig. 2.
From the GPO PX Cα-Cβ correlation, the GPO PX Cβ-Cγ correlations are found, as shown in Fig. 2 and Fig. 3, from which the mean 13Cγ chemical shift for the bone GPO PX rings is determined as 24.8 ppm, with partial overlap with the main population of GPY centred at 25.3 ppm. We note that the strong similarity of the proline signal chemical shift distribution between the mouse bone and in vitro matrix samples for all proline signals is a clear indication that the collagen structures in the two samples are similar, unlike the peptide proline distribution, which clearly only overlaps with a subset of that found in bone.
As discussed above, this 13Cγ chemical shift represents a population-weighted average between the 13Cγ chemical shifts expected for the endo (23.8 ppm) and exo (25.7 ppm) proline ring conformations7. The mean 13Cγ chemical shift of 24.8 ppm for bone collagen GPO PX, while only a small change compared to the 13Cγ of 25.3 ppm for the (GPO)11 model collagen peptide7, indicates the mean population distribution for collagen GPO PX in the intact tissues is slightly more skewed towards endo compared to the collagen model peptide. Nonetheless, this observed 13Cγ chemical shift (24.8 ppm) is still distinct from a “pure” endo chemical shift (23.8 ppm), indicating that the proline rings in GPO triplets in bone do not strongly favour the thermodynamically more stable endo conformation23,24,25, and instead show a distribution between endo and exo conformations, with fast exchange over the NMR time scale, i.e. they are flexible.
To confirm our assignment, we note that the intensity of the signals arising from GPO triplets compared to the GPY (where Y ≠ O) should match the expected ratio in the sequence for mouse collagen type I. Figure 4 shows 1D slices taken from the SQ-DQ experiment in Fig. 2, at the C′-Cα, Cα-Cβ, and Cβ-Cγ DQ (sum) frequencies. The GPY:GPO triplet ratio in the sequence is 233:103, which means we expect to observe a GPY signal that is approximately 2.3 times more intense than that of GPO (assuming similar linewidths, if not then the integral of the signals should match this ratio). From Fig. 4, we can see that this is indeed true. The effect is clearer in the case of the osteoblast matrix cultured in vitro than the bone spectrum, as the bone spectrum is labelled in other amino acids apart from proline and glycine, giving rise to overlapping signals that can skew the observed ratio.
We expected that GPO PX would occupy a much larger range of conformations for fibrils in intact tissues compared to model collagen-like triple helical peptides. However, this is not the case, as evidenced by the NMR lineshapes for different samples shown in Fig. 4. The relative line widths are most easily assessed for the model peptide and in vitro osteoblast matrix, because the Pro 13C signals are not obscured by signals from other labelled amino acids as they are for the bone sample.
There is some overlap between GPO and GPY proline 13C signals for the osteoblast ECM sample, particularly for C′, which needs to be taken into account when comparing the Pro 13C lineshapes (GPY C′ sites give a shoulder on the high frequency side of the GPO C′ signal). Nevertheless, it is clear that the GPO proline Cα and Cβ lineshapes are highly similar between model peptide and in vitro matrix collagen. The Cα lineshapes are directly comparable. In the Cβ spectrum, there is some additional small signal to low frequency for the in vitro matrix sample, but the majority signal has a similar linewidth to that for the model peptide.
The lineshapes allow us to directly compare the range of conformations for GPO PX between collagen in an intact tissue and the model collagen peptide. The single-quantum NMR lineshapes are in effect the sum of individual lineshapes from each GPO PX residue in the sample, each having an isotropic shift determined by the local molecular geometry for each individual PX. These individual lineshapes are not resolved, but the width of their sum signal, i.e. the observed signal in the SQ dimension of the DQ-SQ spectra, retains information on the range of GPO PX isotropic chemical shifts and thus on the distribution of time-averaged PX ring conformations.
Apaft from the distribution of proline ring geometries, the NMR linewidths can be affected by by other factors: T2 (transverse) relaxation, homonuclear 13C-13C dipolar coupling and molecular motion all contribute to the homogeneous linewidth. Hydration and sample temperature also play a role. While we have carried out our experiments with a fairly low level of hydration in order to capture a maximum range of conformations (lyophilization generally traps conformations and increases heterogeneous broadening), and maintained them at similar experimental temperatures, we cannot resolve the different contributions to the 13C lineshapes. However, correspondence of the overall 13C lineshapes implies some similarity in the distribution of proline residue conformations, molecular motion and T2 relaxation time (which itself depends on molecular motion).
We further confirmed similarity in the distribution of GPO geometries between the in vitro matrix collagen and the collagen model peptide by following the build-up of G-P 13C correlation signal intensity in a series of 2D 13C-13C proton-driven spin diffusion (PDSD) correlation NMR experiments in which the mixing time for 13C to 13C magnetization transfer is varied (see Supplementary Fig. S4).
In summary, we see that PX in GPO exhibits a mix of endo and exo conformations, in a distribution that is similar to what we see in the model peptide. In our previous work7, we have shown that collagen-like model peptides exhibit a dynamic equilibrium of endo and exo conformations, with the equilibrium positioned at a ratio of near 50:50 at biologically-relevant temperatures. With the experimental data summarised thus far, we propose that the same distribution of endo and exo conformations (with very little bias towards endo) is observed in biological samples.
The Pro(X) rings in GPO triplets have greater local conformational flexibility than in GPY sequences
From the NMR data presented above, we determined that PX in GPO in native collagen samples has a distribution over endo and exo conformations. However, it is also clear that PX in GPY (where Y ≠ O) exhibits a 13Cγ chemical shift that is also greater than that in a pure endo case. In previous work7, we used the potential energy landscape approach26 to demonstrate the inherent flexibility or frustration of helix parameters, which is coupled to PX endo-exo flips in GPO sequences. We use the same approach here to analyse whether the flexibility of PX rings in GPO triplets differs in any way from GPY triplets, where Y is a conformationally less constrained amino acid. Specifically, we predict the structural behaviour of PX rings in a GPA triplet compared with those in a GPO triplet. A GPA triplet was selected since it is the most common collagen type I GPY triplet in which Y is an amino rather than an imino acid.
All the calculations involve geometry optimisation to characterise local minima and the transition states and pathways that connect them on the potential energy landscape. By applying appropriate structural perturbations to a ground state conformation, this procedure allows for sets of energy minima to be computed that span particular regions of conformational space. For the present purposes we are interested in the subspace of minimum energy conformations that can be adopted by perturbing the backbone dihedral angles of a single GPY triplet while it is embedded within in a larger collagen triple helix. Flexibility at a residue comes from the presence of a range of energetically-accessible conformations for that residue. The relative number of distinct minima found in each subspace and the corresponding range of dihedral angles are taken as a measure of the likely flexibility. If many alternative conformations exist, separated by thermally accessible barriers on the experimental time scale, then we predict greater flexibility.
The structural perturbations to the ground state structure were carefully designed to uniformly sample the space of backbone dihedral angles and proline endo and exo conformations for the sixth triplet in the trailing chain in both (POG)12 and (PAG)12 superstructures. A single perturbation consisted of choosing a pair of atoms separated by a linear set of covalent bonds, and rotating as a rigid body all the intervening atoms by an angle randomly selected within a maximum amplitude. When such rotations occur between two backbone atoms the local ring geometry and endo/exo structures are conserved, but the backbone dihedrals, in which the atom pair are involved, change. Rotations applied to the atoms between the Cβ and Cδ atoms in the proline rings can force a subsequent relaxation into either endo or exo conformations, depending on the angle of rotation, which also modifies the backbone dihedrals of the proline and neighbouring residues. Further details of the particular groups considered can be found in the Methods.
By repeating our structural perturbations for each triplet, an ensemble of feasible conformations, corresponding to local potential energy minima, were generated. This analysis yielded only four minima in the case of (PAG)12, and 64 minima in the case of (POG)12. Rather than presenting the whole database of structures, which would be unwieldy, we illustrate the backbone dihedral angles of two neighbouring PX and Y residues in the centre of the sequence for each structure in a Ramachandran plot (Fig. 5). For ease of viewing, each residue (proline and alanine, or proline and hydroxyproline) is presented on different panels of the figure. In the case of PX in (POG)12, we have further divided the plot into two, based on whether the hydroxyproline in the structure has an endo or an exo pucker. Thus, each point in each Ramachandran plot represents a minimum in the potential energy landscape, i.e. an alternative accessible conformation.
For PX rings in the GPA triplet, all the perturbed minima in the case of PX endo pucker have nearly identical dihedral angles, resulting effectively in just two possible backbone conformations, one associated with endo pucker at PX, and the other with exo pucker. There are therefore, two well-defined, accessible backbone conformations at GPA triplets. To deform the GPA triplet, or in other words, to access GPA PX backbone structures with significantly different ϕ/ψ angles to these endo or exo minima, would require large energy perturbations, corresponding to thermally inaccessible barriers at biologically relevant temperatures.
In striking contrast, the PX ring in a GPO triplet can move between local energy minima that exhibit a range of ϕ/ψ angles for both endo and exo PX conformations. The diversity of conformations accessed via local structural perturbations for GPO PX rings depends on whether the neighbouring Hyp is in the endo or exo conformation. The combination of endo and exo conformations for proline and hydroxyproline in GPO gives rise to four clusters, as illustrated in Fig. 5(d,e), where PX (and Hyp) endo-exo ring conformations are accompanied by systematic shifts in backbone conformation corresponding to extension-compression of the helical chain.
Combined with the NMR results presented in the first section, we conclude that the GPO proline rings in native collagen proteins exhibit flexibility in the form of endo-exo pucker, just as previously observed in model peptides. Our computational results further demonstrate that these endo-exo pucker motions are not limited locally at the proline ring, but are coupled to the backbone, and can lead to overall extension and compression of the triple helix at GPO triplets. In the context of heterotrimeric collagens and fibrils formed from collagen triple helices, it is likely that these extension and compression motions will lead to bending of the triple helix and the fibril.
GPO Pro(X) flexibility may be necessary for the biomechanical function of collagen
We next asked what is the role of such flexibility at GPO triplets, and specifically whether it could impact on fibril as well as molecular flexibility. To determine the location of the evolutionarily conserved GPO triplets in the fibril, we carried out sequence alignment across diverse species for collagen type I and generated a consensus sequence for each chain. Using the database of collagen type I sequences, we also calculated the conservation of each GPO triplet. Full results of the calculations for collagen type I are presented in Supplementary Table S1 and Fig. S5.
From our sequence analysis, we find that there are 33 highly conserved GPO sites across collagen α1(I) chains out of 43 in the consensus sequence, and 20 highly conserved GPO triplets across collagen α2(I) chains out of 33 in the consensus sequence. If we consider only mammalian sequences, these values increase to 41 out of 43 GPO triplets in the α1(I) chain, and 24 out of 33 in the α2(I) chain being defined as highly conserved at the same conservation threshold (75%).
The distribution of GPO sites in the experimentally-determined model27 of collagen type I fibrils and also the consensus sequence is shown in Fig. 6. For ease of comparison, the consensus sequence for the collagen type I α1 and α2 chains is arranged by D-period. The consensus sequence for type I collagen is provided as a larger PDF image in the Supplementary data.
From Fig. 6, it is clear that there is a spatial correlation of GPO sequences; far from being randomly scattered over the fibril structure, these sequences occur primarily as banded clusters across the fibril structure that persist across different D-periods, exemplified in the XRD-derived collagen type I structural model28 in Fig. 6a and the sequence representation in Fig. 6b.
The distribution of GPO triplets varies within the fibril structure. Collagen fibrils have two zones: the overlap zone, where all five D periods overlap, and the hole zone, where the short D5 period leads to a gap or hole in the fibrillar structure. There are clearly more GPO triplets present in the overlap zone, and fewer in the hole/gap zone. The banding of GPO triplets is also more obvious in the overlap zone.
Bearing in mind the conformational flexibility of the GPO triplet structure, these clusters of GPO triplets in the fibril represent regions where the fibril structure itself can rapidly extend, compress or bend, and so serve as flexible joints for both the molecular and fibrillar structure, without significantly increasing the energy of the system. Hence, we propose that these GPO triplets act as “expansion joints”, especially when viewed in the context of their distribution over the fibril. While Y-position hydroxyproline is known to increase the thermal stability of a collagen triple helix29, and to promote PPII formation in the backbone5,30, the secondary effect of placing the preceding proline into a conformationally frustrated state (i.e. with many pucker conformations of similar energy)7 provides local flexibility at these conserved locations of the triple helix and therefore also of the fibril. Such local flexibility can be important for the overall integrity of the fibril, thus explaining the observation that thermal stability is associated with total imino acid content (proline and hydroxyproline) and not hydroxyproline alone31.
We consider three important implications arising from our proposal of GPO sites as expansion joints in collagen fibrils: firstly, the role of of GPO triplets in collagen binding by considering the distribution of GPO relative to known binding sites on collagen proteins; secondly, the possibility that asymmetrical distribution GPO triplets may aid larger angle bending and functional displacement of the C terminus in the D5 period; and thirdly, the consequences of known mutations of conserved GPO sites.
Role of GPO triplets in binding of collagen fibrils to other ECM components
Different types of binding are likely to exert different mechanical forces on the collagen fibril. The integrin α2β1 domain–peptide co-crystal (PDB 1DZI)32 describes a bend in the model collagen peptide upon ligation, suggesting that molecular distortion may be necessary for optimal interaction of native collagen with the integrin. Such molecular distortion upon binding to the integrin would affect the integrity of the collagen fibril, and if replicated many times by the multiple collagen-integrin interactions presented by a cell, significant disorder of the collagen fibril would result.
We note that the high affinity integrin binding sites, shown in Fig. 6, all occur in close proximity and on the N-terminal side of conserved GPO triplets. On the other hand, the main DDR and VWF binding site, also occurring close to multiple strongly conserved GPO triplets, is found on their C-terminal side. We hypothesise that the clusters of GPO triplets serve to protect the structural integrity of the adjacent sites when the fibrillar structure is subjected to external forces. The multiple highly conserved GPO triplets close to the DDR/VWF binding site in the fibril (as seen in the D-period arrangement of the consensus sequence in Fig. 6b) may provide additional controlled flexibility for this binding site.
We speculate that local structural distortion is necessary to maintain the organization of collagen molecules within the fibrillar structure when ligands bind, and that clusters of GPO triplets across the fibril in close proximity to the collagen-ligand binding site provide controlled, reversible local distortion of the structure.
Asymmetrical distribution of GPO triplets may facilitate functional bending of the triple helix
The distribution of GPO triplets between the three chains of the collagen triple helix can affect its accessible overall motion range. Where a GPO sequence occurs at the same locus of all three chains, proline ring endo-exo flips will allow extension-compression in all three chains, permitting concerted movement at this position. The stagger between the three chains dictates that extension-compression is never restricted to the axis of the triple helix, but will always include a bending component.
For collagen type I, a heterotrimer containing two α1 chains and one α2 chain, there are many cases where GPO triplets do not occur at the same locus in both the α2 and α1 chains. Chain extension-compression can then only occur asymmetrically, bending the triple helix in a specific direction, through an angular range defined by the change in chain backbone structure upon proline endo-exo ring flip, typically a change of around 15° in proline dihedral angle.
Interestingly, the majority of the GPO triplets in the fibril hole zone only occur in either the α1 or α2 chains. The X-ray fibre diffraction-derived model of the collagen fibril structure27 shows the collagen triple helices twisting around one another through the hole zone. If this molecular twisting were to occur via homogeneously flexible regions in the collagen triple helices, molecular ordering would be compromised, as there would be no control over which direction (or by how much) a collagen triple helix can bend. However, an appropriate distribution of GPO triplets within the hole zone could readily allow well-defined bending in a specific direction, which would allow the collagen triple helices to twist around one another without the possibility of molecular disordering. Such considerations, exemplified here by collagen I, will not apply to the homotrimeric fibrillar collagens, II, III, XXIV and XXVII, but will be relevant to the heterotrimeric collagens V and XI.
The (GPO)5 and (GPO)4 sequences at the C termini of the α1 chains and α2 chains, respectively, are well-conserved in the fibrillar collagens. The triple helix extension-compression ability that these sequences confer would allow the C-terminus some flexibility in its spatial location, thus our hypothesis that the GPO sequences play the role of “expansion joints”. All other GPO triplets in D5 that precede the (GPO)5 sequence occur only in the α1 chains, so that D5 has controlled freedom to bend at these three points. It has previously been hypothesized that the C-terminal telopeptide protects underlying ligand binding sites in the collagen fibril molecular structural arrangement33; the (GPO)5 sequences and D5 period that precede it in primary sequence may assist in such a function, by controlling the possible displacements of the C-terminal, but at the same time allowing it to be displaced, thus allowing ligand binding.
GPO clusters can tolerate pathological mutations in collagen type I
While the GPO positions are evolutionarily conserved, we assessed the known mutations at these sites that lead to human disease. Using the NCBI ClinVar database34, we assessed missense mutations in collagen, and the overlap of these mutations with locations of conserved GPO triplets, to understand the functional and likely pathological consequences. We are aware that this type of analysis is prone to survivor bias. With this caveat, we will offer a few interpretations of our results.
As far as the collagen type I triple helical region is concerned, there are 95 unique single base mutations for the α1(I) chain, and 110 for the α2(I) chain. For α1(I), we found 33 highly conserved GPO sites in the consensus sequence, of which 10 correspond to the reported mutation sites (human variants). Conserved GPOs account for 9.8% of the total helix sequence, and 10.5% of their locations overlap with possible mutation sites. For α2(I) we found that there are 9 GPO locations out of 20 highly conserved that overlap with reported mutation sites. 5.9% of the chain consists of conserved GPO triplets, and 8.2% of the 110 mutations overlap with conserved GPOs.
By inspecting the sites where mutations overlap with bands or clusters of conserved GPOs, we note that 16 mutations (in both chains α1(I) and α2(I)) occur within a GPO band/cluster, while six mutations occur in relatively isolated GPOs. However, given the fact that many more GPO triplets occur in clusters within the triple helix or across the fibril, and relatively few are isolated, it is difficult to draw firm conclusions from this observation.
The diseases associated with the reported mutations appear to vary by chain. Most mutations in α1(I) are associated with osteogenesis imperfecta, and in α2(I) with Ehlers Danlos syndrome.
These results show that although mutations occurring in GPO triplets in collagen type I can be tolerated, in the sense that it is possible to survive past embryonic developmental stages, they lead to pathology in most cases. A more detailed analysis including more collagen types will be required to separate the effects of GPO (or lack thereof) on biomechanical properties of the fibril and its effects on biosynthesis and embryonic development.
Peptide synthesis and purification
((GPO)5(G*P*O)(GPO)5)3 was synthesized as previously reported7. Briefly, the peptide was synthesized (0.1 mmol scale) as C-terminal amides on a TentaGel R RAM resin (loading of 0.19 mmol/g, Rapp Polymere) following the standard Fmoc-based solid-phase peptide synthesis strategy on a microwave-assisted automated peptide synthesizer (Liberty™, CEM), and purified by reverse phase HPLC. Pure peptides were characterised by matrix-assisted laser desorption and ionization-time of flight (MALDI-TOF) mass spectrometry (Supplementary Fig. S1).
Labelling of mouse tissue
Our feeding and euthanasia methods were unregulated procedures under the UK Animals (Scientific Procedures) Act 1986 and therefore were not subjected to formal ethics review. Our methods complied with the review processes of the University Biomedical Service of the University of Cambridge, which is overseen by the Animal Welfare Ethical Review Body of the University of Cambridge. All experiments were performed in accordance with the UK Animals (Scientific Procedures) Act 1986.
The procedure is based on our previous work19. Briefly, in vivo labelling was achieved with 2000 g of a gel diet (modified Classic A03 Geldiet, SAFE, Augy, France) to minimize in-cage spillage, comprising 50 g 13C, 15N-labelled Celtone powder (Cambridge Isotope Laboratories, Andover, MA, U. S. A.), 67 g fish hydrolysate, 410 g protein free diet (mainly corn starch), 72.9% water, 2.1% preservatives and texture additives, which was packaged in 100 g packs and irradiated at 10 kGy. Three young adult female C57Bl/6 mice, housed together, were fed ad libitum for ca. 3 weeks until the labelled diet was consumed, humanely euthanized using a Schedule 1 method and tissues harvested. Bone tissues from all animals were examined by solid-state NMR to ensure we were not assigning small biological variations between animals, and did not show major variation.
Isolation of fetal sheep osteoblasts
Fetal sheep osteoblasts were isolated from a fetus removed from an 18 weeks pregnant sheep sacrificed for an unrelated study. Femurs were removed from the fetus. After washing several times with 1% trigene (Medichem International), the femur was stripped of muscle and non-osseous tissue to expose the bone which was sectioned into small longitudinal pieces and washed with 70% ethanol followed by repeated washings with Minimum Essential Medium (MEM; Invitrogen) to remove all traces of ethanol. Bone strips were then transferred to Dulbecco’s Modified Eagle Medium (DMEM; Invitrogen) containing bacterial collagenase A (0.5 mg/mL) and dispase II (3 mg/mL) both from Roche Diagnostics. A total of 100 mL of enzyme-media mixture was used for bone sections taken from 3 limbs. Bone strips were incubated at 37 °C in a shaking water bath for 3 hours to release osteoblasts into the medium. After incubation the cell suspension was transferred to a fresh tube and the bone sections were rinsed in DMEM with 20% fetal calf serum (FCS; Invitrogen) to stop the enzymatic digestion. Rinse medium and cell suspension were pooled and passed through a 40 μm mesh filter (Appleton Woods). The cell suspension was then centrifuged at 1000 g for 5 min at room temperature to pellet the cells. The pellet was resuspended in DMEM complete medium and transferred to two T-175 cm3 culture flasks (Nunc) and placed in a 37 °C CO2 incubator. When the cultures were almost confluent, cells were detached with 10 ml of 0.25% trypsin containing 1 mM EDTA (SigmaAldrich) and incubated for 5 min at room temperature. The flasks were tapped at the end of incubation period to completely dislodge the cells from the flask. Trypsin was neutralized by adding 15 mL of DMEM complete media to the culture flask. The cell suspension was centrifuged in a 50 mL tube (Greiner) at 1200 rpm for 5 min and resuspended in 10 mL of DMEM. The cells were transferred into T-175 cm3 culture flasks and were expanded to passage 3 for subsequent experiments.
Basal Medium Eagle (BME) complete medium was prepared by adding 10% FCS, 30 μg/mL L-ascorbic acid 2-phosphate (Sigma), 10 mL/L L-glutamine-penicillin- streptomycin (200 mM L-glutamine, 10,000 units/ml penicillin, and 10 mg/ml streptomycin in 0.9% sodium chloride; Sigma). DMEM complete medium was prepared by adding 10% FCS, 30 μg/mL L-ascorbic acid 2-phosphate, and 10 mL/L L-glutamine-penicillin-streptomycin. All supplements were filter sterilized (0.22 μm filter, Appleton Woods) before addition.
Culturing osteoblasts with labelled compounds
The procedure is based on our previous work19. Briefly, osteoblasts were cultured to confluence in T-175 flasks containing 25 mL BME complete medium. Labelled (U-13C5, 15N) proline (Cambridge Isotope Laboratories) and (U-13C2, 15N) glycine (Cambridge Isotope Laboratories) were added to a final concentration of 46 mg/L and 30 mg/L respectively after filter sterilization (0.22 μm filter). The cultures were incubated at 37 °C in a humidified atmosphere of 95% air and 5% CO2. The culture medium with isotope labelled supplements was renewed every two days until the cells and matrix began to detach from the culture flask, by which time enough ECM had formed for solid-state NMR. Refinement of the cell culture method to produce ECM that was a similar as possible to the native mouse bone tissue as judged by their respective 2D solid-state NMR spectra included adjusting the cell culture medium, the frequency with which the medium was changed, the concentration of ascorbic acid and the manner in which the cultures were handled (so as to produce minimal shear forces on the cells during changes of medium produced the optimal ECM). Samples from more than 20 batches using the final optimized protocol were prepared using isotope-enriched amino acids and all characterized by solid-state NMR to ensure reproducibility of results.
Harvesting ECM from cell culture
The matrix was harvested after nine days of culture, when the cells produce a dense matrix which started to peel off the surface of the tissue culture flask. The medium was removed and the cells were washed with 20 mL 1 x phosphate buffered saline. The flask was placed in a freezer at −80 °C for 24 hours and the cells were lysed by thawing the flasks at room temperature for 30 minutes. The debris produced by cell lysis was removed by repeated washes with PBS. The decellularized ECM was dislodged by gently swirling the flask in the presence of 20 mL PBS. The matrix collected in PBS was transferred to a fresh 50 mL tube and centrifuged at 1200 rpm for 5 min at room temperature. The supernatant was poured off and the ECM dehydrated in an oven at 37 °C overnight. The samples were stored at −20 °C until NMR analysis. ECM of mouse tissue was used directly in solid-state NMR experiments without extraction, purification, or excessive processing.
Rotor packing for solid-state NMR experiments
All samples were placed into Kel-F inserts for Bruker 4 mm rotors prior to being placed into a full-length (17 mm), normal wall thickness (1 mm) Bruker 4 mm rotor. The inserts provide the advantage of restricting the sample length to the region of the coil in the NMR probe that has optimal RF homogeneity.
The peptide ((GPO)5(G*P*O)(GPO)5)3 and the ECM obtained from cell culture were lyophilised prior to packing into the Kel-F insert. The dry mass of the samples used for solid-state NMR experiments were 20.0 mg of pure peptide and 14.2 mg of ECM.
The mouse calvaria bone was not subject to any drying or dehydration procedures, and was simply broken into clips without cryomilling prior to packing into the Kel-F insert. We expect that this will lead to the bone sample being slightly more hydrated than the peptide or the cell culture ECM samples, though no discernible amounts of water was observed visually after the experiment, nor was a significant reduction in sample mass observed. 12.6 mg of mouse bone was used for solid-state NMR experiments.
Solid-state NMR Spectroscopy
All solid-state NMR spectra were recorded on a Bruker Avance I NMR spectrometer with a 9.4 T superconducting magnet, operating at 400 MHz ¹H, 100 MHz ¹³C and 40 MHz 15N frequencies. For all experiments, magic angle spinning rate was set at 10 kHz, and the sample temperature is 297 K, unless otherwise specified.
13C cross-polarisation (13C CP) experiments: the standard cross polarisation sequence in the Bruker pulse programme library was used: ¹H 90° pulse length 2.5 μs, contact time 2.5 ms, with a ramped pulse on ¹H. During acquisition, SPINAL-6435 decoupling at 100 kHz was applied on ¹H.
2D 13C-13C double quantum (DQ)- single quantum (SQ) correlation NMR experiment: initial cross polarisation parameters were the same as in 13C CP experiments. At 10 kHz MAS, 70 kHz POST-C7 pulse sequence36 was applied on 13C to excite double quantum coherence in 0.4 ms. Magnetisation was returned to zero quantum by another 0.4 ms of POST-C7 sequence. During DQ evolution and reconversion, 100 kHz Lee-Goldburg decoupling was applied on ¹H. During acquisition 100 kHz SPINAL-64 decoupling was applied on ¹H. The pulse sequence used was an adapted version of the Avance I large sweep width POST-C7 experiment in the Bruker library. For in vitro ECM 128–256 scans and for the heavy mouse bone samples 432 scans per t1-slice were recorded.
2D 13C-13C proton-driven spin diffusion (PDSD) correlation NMR experiment: initial cross polarisation parameters were also the same as in 13C CP experiments. At 10 kHz MAS, the magnetisation was allowed to evolve at single-quantum coherence during the incremental delay, and returned to zero quantum coherence by a 13C 90° pulse with a length of 3.8 μs. ¹H decoupling was switched off during the mixing period to allow transfer of 13C magnetisation via dipolar coupling and spin diffusion37, with a 13C 90° readout pulse at the end of the mixing period. During both the incremental delay and acquisition periods, SPINAL-64 decoupling was applied at 100 kHz. The pulse sequence used was an adapted version of the Avance I CP spin diffusion experiment in the Bruker library. Mixing periods of between 5 and 200 ms were recorded. For in vitro ECM 64–400 scans (depending on the amount of sample) and for the heavy mouse bone samples 256 scans per t1-delay were recorded.
Analysis of energy landscapes
The calculations employed a standard atomistic force field, namely Amber9 with implicit solvent (igb = 2), and the FF99SB parameter set38. In the computational potential energy landscape approach we employ geometry optimisation techniques to calculate local minima and the transition states and pathways that connect them, to construct a kinetic transition network26. The low energy region of the landscape was first sampled using basin-hopping global optimisation39,40. These minima were then connected using double-ended transition state searches, which identify new minima and pathways, progressively augmenting the database. Observable properties were extracted using standard methods of statistical mechanics and unimolecular rate theory, and the underlying database was refined using additional connection attempts until the quantities of interest appeared to have converged. Details of these procedures can be found in recent reviews41,42
The simulations conducted here, which seek to explain the results of the ssNMR data relating to flexibility of PX prolines adjacent to hydroxyproline residues, required parameters for the Amber9 force field obtained from experimentally derived properties of hydroxyproline with post-translational modifications43. The initial starting points for (POG)12 were derived from PDB 1V7H44,45; those for (PAG)12 were generated from (POG)12 by replacing the hydroxyprolines with alanine.
For each of the two peptide sequences, (POG)12 and (PAG)12, 10000 geometry perturbations were applied to the equivalent PYG group (the 6th group of the trailing chain) in the central region of each collagen triple helix. The perturbed structures were then relaxed to local minima. The 10000 resulting minima were filtered to identify the unique structures, which correspond to the space of accessible conformations for the backbone in the given PGY triplets. The unique minima were then connected in further transition state searches, which helps to ensure that all the relevant structures in the accessible configuration space were located.
We ensured uniform exploration of the backbone dihedral space by randomly rotating rigid groups of atoms between carefully chosen atom pairs. For the (PAG)12 system the pairs were: the Cβ to Cδ axis of the proline tip, the Cα-Cα axis of the peptide bond between the proline and alanine, the N-C axis of the alanine residue, and the Cα to Cα axis of the peptide bond that trailed the alanine residue. This combination of rotation groups ensures that psi and phi dihedrals of the proline, the psi and phi dihedrals of the alanine, the phi angle of the trailing glycine, and the psi angle of the preceding glycine residue are sampled. In addition, the full range of endo and exo conformations of the PX ring are encountered. For the (POG)12 system, the corresponding groups were chosen, except that the C-N rotation of the alanine was replaced by a Cβ-Cδ rotation of the hydroxyproline tip, again inducing exploration of the endo/exo states of the OY residue and corresponding backbone dihedrals.
The uniform sampling of the full set of backbone dihedral angles can generate local minima that include peptide bond rotations and stereochemical rotations, both of which do not correspond to a biologically-feasible collagen triple helix structure. For our analysis, we are only interested in dihedral angle distributions that can be found in a collagen triple helix46,47. Therefore, only those structures where all the perturbed residues relax into the range of phi = −50° to −90° and psi = 130° to 170° were accepted.
Sequence alignment and analysis
For our analysis of the conservation of the GPO positions, we built multiple sequence alignments across diverse species for collagen α1(I) and α2(I) sequences. For each alpha chain, a set of orthologous sequences was acquired using the National Centre for Biotechnology Information (NCBI) Protein Database resources (https://www.ncbi.nlm.nih.gov/protein)48. The NCBI Reference Sequence Database (RefSeq)49 was used as the main resource for protein sequence data. A small proportion of the data was obtained from GenBank and the EMBL databases50,51. The initial sets of sequences identified from these databases were filtered to remove duplicates (including isoforms), leaving a single representative sequence for each species. Each set of sequences was aligned using the software program MUSCLE (http://www.drive5.com/muscle/)52,53. The final sequence sets used can be found in Supplementary Table S2–S4.
Conservation of each GPO triplet was determined by calculating the probability of the occurrence of the GPO triplet across all aligned sequences. The amino acids with the highest frequency at each alignment position was used to generate a consensus sequence.
To analyze the effect of missense mutations on GPO sites, we used the consensus sequences generated in the same procedure as described above. We mapped mutation sites reported for human variants into the consensus sequences and assessed how they align with conserved GPO positions on the collagen type I primary sequence. The National Centre for Biotechnology Information (NCBI) ClinVar database (https://www.ncbi.nlm.nih.gov/clinvar/) was used as a mutation data resource34. The search for mutation sites across procollagen alpha chains was performed using the relevant gene names and the following criteria: molecular consequence: missense mutation; variation type: single nucleotide; review status: at least one star. The GPO triplet is counted as being present at a mutation site if one position of any of its residues (G, P or O) overlaps with a reported mutation site. The analysis of correlation between mutation sites and conserved GPO locations was carried out for the major fibrillar alpha chains (type I, II and III) and for collagen type V alpha chains.
The datasets generated during and/or analysed during the current study will be available on the University of Cambridge Open Data portal upon publication (https://www.research-operations.admin.cam.ac.uk/policies/open-data); a link to the data will be provided for the published manuscript.
Ricard-Blum, S. The collagen family. Cold Spring Harb. Perspect. Biol. 3, a004978 (2011).
Aumailley, M. & Gayraud, B. Structure and biological activity of the extracellular matrix. J. Mol. Med. 76, 253–265 (1998).
Frantz, C., Stewart, K. M. & Weaver, V. M. The extracellular matrix at a glance. J. Cell Sci. 123, 4195–4200 (2010).
Theocharis, A. D., Skandalis, S. S., Gialeli, C. & Karamanos, N. K. Extracellular matrix structure. Adv. Drug Deliv. Rev. 97, 4–27 (2016).
Shoulders, M. D. & Raines, R. T. Collagen Structure and Stability. Annu. Rev. Biochem. 78, 929–958 (2009).
DeRider, M. L. et al. Collagen Stability: Insights from NMR Spectroscopic and Hybrid Density Functional Computational Investigations of the Effect of Electronegative Substituents on Prolyl Ring Conformations. J. Am. Chem. Soc. 124, 2497–2505 (2002).
Chow, W. Y. et al. Hydroxyproline Ring Pucker Causes Frustration of Helix Parameters in the Collagen Triple Helix. Sci. Rep. 5 (2015).
Batchelder, L. S., Sullivan, C. E., Jelinski, L. W. & Torchia, D. A. Characterization of leucine side-chain reorientation in collagen-fibrils by solid-state 2H NMR. Proceedings of the National Academy of Sciences 79, 386–389 (1982).
Jelinski, L. W., Sullivan, C. E., Batchelder, L. S. & Torchia, D. A. Deuterium nuclear magnetic resonance of specifically labeled native collagen. Investigation of protein molecular dynamics using the quadrupolar echo technique. Biophys. J. 32, 515–529 (1980).
Jelinski, L. W., Sullivan, C. E. & Torchia, D. A. 2H NMR study of molecular motion in collagen fibrils. Nature 284, 531–534 (1980).
Saitô, H. et al. A high-resolution 13C-nmr study of collagenlike polypeptides and collagen fibrils in solid state studied by the cross-polarization-magic angle-spinning method. Manifestation of conformation-dependent 13C chemical shifts and application to conformational c. Biopolymers 23, 2279–2297 (1984).
Saitô, H. & Yokoi, M. A 13C NMR Study on Collagens in the Solid State: Hydration/ Dehydration-Induced Conformational Change of Collagen and Detection of Internal Motions. J. Biochem. 111, 376–382 (1992).
Reichert, D. et al. A solid-state NMR study of the fast and slow dynamics of collagen fibrils at varying hydration levels. Magn. Reson. Chem. 42, 276–284 (2004).
Huster, D., Schiller, J. & Arnold, K. Comparison of collagen dynamics in articular cartilage and isolated fibrils by solid-state NMR spectroscopy. Magn. Reson. Med. 48, 624–632 (2002).
Sarkar, S. K., Sullivan, C. E. & Torchia, D. A. Nanosecond fluctuations of the molecular backbone of collagen in hard and soft tissues: a carbon-13 nuclear magnetic resonance relaxation study. Biochemistry 24, 2348–2354 (1985).
Sarkar, S. K., Sullivan, C. E. & Torchia, D. A. Solid state 13C NMR study of collagen molecular dynamics in hard and soft tissues. J. Biol. Chem. 258, 9762–9767 (1983).
Sarkar, S. K. et al. Molecular dynamics of collagen side chains in hard and soft tissues. A multinuclear magnetic resonance study. Biochemistry 26, 6793–6800 (1987).
Sarkar, S. K., Young, P. E. & Torchia, D. A. Ring dynamics of DL-proline and DL-proline hydrochloride in the solid state: a deuterium nuclear magnetic resonance study. J. Am. Chem. Soc. 108, 6459–6464 (1986).
Chow, W. Y. et al. NMR spectroscopy of native and in vitro tissues implicates polyADP ribose in biomineralization. Science 344, 742–746 (2014).
Wong, V. W. C. et al. Preparation of highly and generally enriched mammalian tissues for solid state NMR. J. Biomol. NMR 63, 119–123 (2015).
Wang, Y. & Jardetzky, O. Investigation of the Neighboring Residue Effects on Protein Chemical Shifts. J. Am. Chem. Soc. 124, 14075–14084 (2002).
Wishart, D. S., Bigam, C. G., Holm, A., Hodges, R. S. & Sykes, B. D. 1H, 13C and 15N random coil NMR chemical shifts of the common amino acids. I. Investigations of nearest-neighbor effects. J. Biomol. NMR 5, 67–81 (1995).
Hodges, J. A. & Raines, R. T. Stereoelectronic effects on collagen stability: the dichotomy of 4-fluoroproline diastereomers. J. Am. Chem. Soc. 125, 9262–9263 (2003).
Hodges, J. A. & Raines, R. T. Stereoelectronic and steric effects in the collagen triple helix: toward a code for strand association. J. Am. Chem. Soc. 127, 15923–15932 (2005).
Shoulders, M. D., Guzei, I. A. & Raines, R. T. 4-chloroprolines: synthesis, conformational analysis, and effect on the collagen triple helix. Biopolymers 89, 443–454 (2008).
Wales, D. Energy Landscapes: Applications to Clusters, Biomolecules and Glasses. (Cambridge University Press, 2003).
Orgel, J. P. Low resolution, molecular envelope structure of type I collagen in situ determined by fiber diffraction. Single type I collagen molecule, post rigid body refinement, ‘relaxed’. https://doi.org/10.2210/pdb3hr2/pdb (2009).
Orgel, J. P. R. O., Irving, T. C., Miller, A. & Wess, T. J. Microfibrillar structure of type I collagen in situ. Proc. Natl. Acad. Sci. USA 103, 9001–9005 (2006).
Persikov, A. V., Ramshaw, J. A. M. & Brodsky, B. Prediction of collagen stability from amino acid sequence. J. Biol. Chem. 280, 19343–19349 (2005).
Shoulders, M. D., Satyshur, K. A., Forest, K. T. & Raines, R. T. Stereoelectronic and steric effects in side chains preorganize a protein main chain. Proc. Natl. Acad. Sci. USA 107, 559–564 (2010).
Josse, J. & Harrington, W. F. Role of Pyrrolidine Residues in the Structure and Stabilization of Collagen. J. Mol. Biol. 9, 269–287 (1964).
Emsley, J., Knight, C. G., Farndale, R. W., Barnes, M. J. & Liddington, R. C. Structural Basis of Collagen Recognition by Integrin α2β1. Cell 101, 47–56 (2000).
Orgel, J. P. R. O. et al. Collagen fibril surface displays a constellation of sites capable of promoting fibril assembly, stability, and hemostasis. Connect. Tissue Res. 52, 18–24 (2011).
Landrum, M. J. et al. ClinVar: public archive of relationships among sequence variation and human phenotype. Nucleic Acids Res. 42, D980–5 (2014).
Fung, B. M., Khitrin, A. K. & Ermolaev, K. An improved broadband decoupling sequence for liquid crystals and solids. J. Magn. Reson. 142, 97–101 (2000).
Hohwy, M., Jakobsen, H. J., Edén, M., Levitt, M. H. & Nielsen, N. C. Broadband dipolar recoupling in the nuclear magnetic resonance of rotating solids: A compensated C7 pulse sequence. J. Chem. Phys. 108, 2686–2694 (1998).
Szeverenyi, N. M., Sullivan, M. J. & Maciel, G. E. Observation of spin exchange by two-dimensional fourier transform 13C cross polarization-magic-angle spinning. J. Magn. Reson. 47, 462–475 (1982).
Hornak, V. et al. Comparison of multiple Amber force fields and development of improved protein backbone parameters. Proteins 65, 712–725 (2006).
Li, Z. & Scheraga, H. A. Monte Carlo-minimization approach to the multiple-minima problem in protein folding. Proc. Natl. Acad. Sci. USA 84, 6611–6615 (1987).
Wales, D. J. & Doye, J. P. K. Global Optimization by Basin-Hopping and the Lowest Energy Structures of Lennard-Jones Clusters Containing up to 110 Atoms. J. Phys. Chem. A 101, 5111–5116 (1997).
Wales, D. J. Energy landscapes: some new horizons. Curr. Opin. Struct. Biol. 20, 3–10 (2010).
Joseph, J. A., Röder, K., Chakraborty, D., Mantell, R. G. & Wales, D. J. Exploring biomolecular energy landscapes. Chem. Commun. 53, 6974–6988 (2017).
Park, S., Radmer, R. J., Klein, T. E. & Pande, V. S. A new set of molecular mechanics parameters for hydroxyproline and its use in molecular dynamics simulations of collagen-like peptides. J. Comput. Chem. 26, 1612–1616 (2005).
Okuyama, K. et al. Crystal structures of collagen model peptides with Pro-Hyp-Gly repeating sequence at 1.26 A resolution: implications for proline ring puckering. Biopolymers 76, 367–377 (2004).
Okuyama, K. et al. Crystal Structures of Collagen Model Peptides with Pro-Hyp-Gly Sequence at 1.26 A. https://doi.org/10.2210/pdb1v7h/pdb (2004).
Ramakrishnan, C. & Ramachandran, G. N. Stereochemical criteria for polypeptide and protein chain conformations. II. Allowed conformations for a pair of peptide units. Biophys. J. 5, 909–933 (1965).
Lovell, S. C. et al. Structure validation by Cα geometry: ϕ,ψ and Cβ deviation. Proteins: Struct. Funct. Bioinf. 50, 437–450 (2003).
NCBI Resource Coordinators. Database Resources of the National Center for Biotechnology Information. Nucleic Acids Res. 45 D12–D17 (2017).
O’Leary, N. A. et al. Reference sequence (RefSeq) database at NCBI: current status, taxonomic expansion, and functional annotation. Nucleic Acids Res. 44, D733–45 (2016).
Benson, D. A. et al. GenBank. Nucleic Acids Res. 45, D37–D42 (2017).
Silvester, N. et al. The European Nucleotide Archive in 2017. Nucleic Acids Res. 46, D36–D40 (2018).
Edgar, R. C. Muscle: a multiple sequence alignment method with reduced time and space complexity. BMC Bioinformatics 5, 113 (2004).
Edgar, R. C. Muscle: multiple sequence alignment with high accuracy and high throughput. Nucleic Acids Res. 32, 1792–1797 (2004).
Hanwell, M. D. et al. Avogadro: an advanced semantic chemical editor, visualization, and analysis platform. J. Cheminform. 4, 17 (2012).
Brondijk, T. H. C., Bihan, D., Farndale, R. W. & Huizinga, E. G. Implications for collagen I chain registry from the structure of the collagen von Willebrand factor A3 domain complex. Proc. Natl. Acad. Sci. USA 109, 5253–5258 (2012).
The authors acknowledge BBSRC grant number BB/GO21329/1 (MJD, DGR), EPSRC DTA studnetship and Doctoral Prize (WYC), British Heart Foundation RG/09/003/27122 and PG/08/011/24416 (RWF, DB, DAS), Wellcome Trust 094470/Z/10/Z (RWF, DB, DAS), ERC and EPSRC (DJW), ERC (LJC) and the Raymond and Beverly Sackler Fund for Physics of Medicine, University of Cambridge (AP).
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Chow, W.Y., Forman, C.J., Bihan, D. et al. Proline provides site-specific flexibility for in vivo collagen. Sci Rep 8, 13809 (2018). https://doi.org/10.1038/s41598-018-31937-x
- 13Cγ Chemical Shifts
- Proline Ring
- Collagen Model Peptides
- Collagen Triple Helix
- Backbone Dihedrals
Increased Collagen Turnover Impairs Tendon Microstructure and Stability in Integrin α2β1-Deficient Mice
International Journal of Molecular Sciences (2020)
Scientific Reports (2020)
Triple‐Helix‐Stabilizing Effects in Collagen Model Peptides Containing PPII‐Helix‐Preorganized Diproline Modules
Angewandte Chemie (2020)
Seminars in Cancer Biology (2020)
Solid State Nuclear Magnetic Resonance (2020)