Deficits in neurite outgrowth and synaptogenesis have been recognized as an underlying developmental aetiology of psychosis. Electrical stimulation promotes neuronal induction including neurite outgrowth and branching. However, the effect of electrical stimulation using 3D electrodes on neurite outgrowth and synaptogenesis has not been explored. This study examined the effect of 3D electrical stimulation on 3D primary cortical neuronal cultures. 3D electrical stimulation improved neurite outgrowth in 3D neuronal cultures from both wild-type and NRG1-knockout (NRG1-KO) mice. The expression of synaptophysin and PSD95 were elevated under 3D electrical stimulation. Interestingly, 3D electrical stimulation also improved neural cell aggregation as well as the expression of PSA-NCAM. Our findings suggest that the 3D electrical stimulation system can rescue neurite outgrowth deficits in a 3D culturing environment, one that more closely resembles the in vivo biological system compared to more traditionally used 2D cell culture, including the observation of cell aggregates as well as the upregulated PSA-NCAM protein and transcript expression. This study provides a new concept for a possible diagnostic platform for neurite deficits in neurodevelopmental diseases, as well as a viable platform to test treatment options (such as drug delivery) in combination with electrical stimulation.
Deficits in neurite outgrowth and synaptogenesis have been recognized as an underlying developmental aetiology of psychosis1. Unfortunately, traditional pharmacological intervention has limited efficacy in treating neurite outgrowth deficits2, and is usually associated with haematological and metabolic side effects3,4,5. Recent studies suggest that electrical stimulation can improve neurite outgrowth6,7,8,9, and may therefore become a novel treatment option for cognitive deficits in neurodevelopmental and neurodegenerative diseases, including schizophrenia.
We have previously shown that electroactive polypyrrole (PPy) doped with dodecylbenzenesulfonic acid (DBSA) promotes neuronal induction, including neurite outgrowth and branching in primary cortical neuronal cultures from normal and disease model animals10,11, as well as in human neural stem cells12. However, these applications are based on a two-dimensional (2D) cell culture system, while neural tissues are actually three-dimensional (3D) structures13. The importance of examining cell behaviour using 3D as opposed to 2D structure has been highlighted in a number of recent important studies14,15,16. Therefore, a 3D electrical stimulation system is required to test the effect of electrical stimulation on 3D cell cultures.
Electrical stimulation has been reported to induce enhanced neurite outgrowth in 3D cell culture6. However, the effect of 3D electrical stimulation from 3D electrodes on neurite outgrowth and synaptogenesis has not been explored. An interdigitated 3D electrode system has previously been developed and reported by our group17, but its application on biological systems has not been investigated.
Here, we described the design and fabrication of an interdigitated 3D electrode system and examined the effect of 3D electrical stimulation delivered by these electrodes on 3D primary cortical neuronal cultures from normal and disease model mice. We also compared the differential effect of electrical stimulation on neurite growth, synaptogenesis, and cell migration between 2D and 3D. Finally, we tried to unravel a potential molecular biological mechanism that may underlie these effects.
Fabrication of 3D interdigitated electrodes
Designs for two separate metal electrodes and a polymer spacer were prepared in Solidworks computer aided design software. The volume of the designed cell was minimised for efficient use of cell materials and to ensure compatibility with microscopy systems. The spacer elements to ensure electrical isolation of the electrodes was produced using an Objet Connex 350 (Stratasys, USA) in a biocompatible proprietary material, MED610 (Stratasys, USA). Electrodes with nine pillars, each with diameter 300 µm and height of 3 mm were produced in Ti6Al4V alloy (TLS TechnikSpezialpulver, Germany) using a Realizer SLM50 (Realizer GmbH, Germany). Printed polymer components were removed from the build tray and support material manually removed prior to cleaning as per Stratasys protocol. Printed metal electrodes were manually removed from the build tray using side cutters and supported surfaces manually finished with 600 grit sandpaper. Electrodes were then sonicated in IPA for 30 mins to remove any loosely bound metal particles.
The Pyrrole (Py) monomer and the dopant, DBSA were obtained from Sigma-Aldrich (Sydney, Australia). The Py was distilled prior to use. All Py monomer and dopant solutions were prepared with deionized water (Milli-Q). Prior to electrochemical deposition, printed 3D interdigitated electrodes were cleaned by sonication in acetone and deionized water. PPy was deposited on 3D electrodes using potentiostatic electropolymerization method. The electrodeposition was conducted using an Ag/AgCl reference electrode and a stainless steel mesh counter electrode, in aqueous solution containing 0.1 M pyrrole and 0.05 M DBSA with 0.75 V applied potential for 20 min. The electrodes were then rinsed with water and dried in a vacuum oven overnight at 50 °C. The choice of conductive polymer as coating material was based on our previous experiments in 2D10,11.
Interdigitated electrode arrangements (Fig. 1) were manually assembled by bonding coated Ti6Al4V electrodes to the spacer by the addition of MED610 and curing by application of UV light for 30 seconds. The selection of Ti6Al4V for our electrodes is because: (1) it is 3D printable; (2) it is suitable for conducting polymer coating. The assembled structure was then thoroughly cleaned in water, followed by immersion in 2% wt/vol sodium hydroxide in water for 2 hrs, rinsing in water, before immersion in IPA for 30 mins and then allowed to dry in air prior to use.
The dimensions of the designed electrode constructs are demonstrated in Fig. 1D. A schematic illustration of the process steps is demonstrated in Fig. 1, and a picture showing the stimulation chambers and the electrodes is in Fig. 2A, while Fig. 2B shows a sample immunofluorescence image of 3D primary neuronal cultures encapsulated with collagen in this device.
3D primary prefrontal cortex (PFC) neuronal cultures in collagen
Experiments were run with 6 parallel samples and repeated 3 times. The heterozygous NRG1-KO mice18 have been described previously. Heterozygous NRG1-KO male and wild-type C57BL/6 J female mice were mated to obtain either heterozygous NRG1-KO or wildtype pups. All experimental procedures were approved by the Animal Ethics Committee, University of Wollongong, Australia, and complied with the Australian Code of Practice for the Care and Use of Animals for Scientific Purposes19.
On postnatal day 0 (PN0), genotypes were determined by tail biopsy and polymerase chain reaction (primers for Nrg1-KO mice: Neo173F 5′-ATGAACTGCAGGACGAGGCA-3′ and Neo6301R 5′-GCCACAGTCGATGAATCCAG-3′; primers for wild-type mice: 5′-AACAGCCTGACTGTTAACACC-3′ and 5′-TGCTGTCCATCTGCACGAGACTA-3′. Primary pre-frontal cortical cultures were prepared as described previously20. In brief, postnatal day 0 (PN0) pups were decapitated and brains were dissociated aseptically. Brains were then placed into ice cold dissecting solution. After careful removal of the meninges and superficial blood vessels, the prefrontal cortex area from both hemispheres was dissected and cut into approximately 1 mm pieces. The tissue pieces were incubated at 37 °C for 30 mins in papain-containing enzyme solution. Digested tissue pieces were washed in solutions containing enzyme inhibitors, and then dissociated by triturating in neurobasal media (NBM) (Sigma-Aldrich, Sydney, Australia) through glass pipettes and collected in warm NBM supplemented with B27 (Sigma-Aldrich, Sydney, Australia). Dissociated cortical cells were encapsulated in 3D collagen culture kit (Merck Millipore, VIC) at a final density of 1 × 106 cells/ml and plated over the interdigitated electrodes coated with polypyrrole polymers (PPy.DBSA). This cell density was selected based on our preliminary condition tests. For 3D cell culture, the cell density is significantly higher than those in 2D. There might be variations for proximity of cells from sample to sample, but this has been captured by increasing the overall sample size during the data collection process.
5-FDU was added to the conditional NBM (which was used to replace the NBM) to halt the growth of non-neuronal cells. Cultures were maintained at 37 °C in a humidified CO2 incubator with media changed every 3 days. Cells were used for experiments for 7 days in vitro (DIV7).
3D electrical stimulation
Electrical stimulation was applied to corresponding groups of cell culture in accordance with the clinically relevant published method21. Briefly, cells were stimulated for 8 h per 24 h period for 3 days under 5% CO2 humidified atmosphere at 37 °C. The electrodes were fabricated with 3D printing technique (as detailed above), then coated with or without Ppy.DBSA. The cells were stimulated at 1 ± 0.25 mA/cm2 using a biphasic waveform of 100 μs pulses with 20 μs interphase open circuit potential and a 3.78 ms short circuit (250 Hz) using a Digital StimulatorDS8000 and A365 Isolator units (World Precision Instruments) interfaced with an e-corder system (eDAQ). The voltage waveform across the active electrode area in response to the applied current pulse was recorded.
Cells were grown on Control or Ppy-DBSA coated electrodes until DIV7, when electrical stimulation (8 hours per day, for 3 consecutive days) was conducted (for groups without electrical stimulation, wells were placed next to the stimulation groups so that the cells had the same growth conditions as those in the stimulation groups) before being fixed in 3.7% paraformaldehyde. Cells were then washed in PBS, and permeabilized with 0.3% Triton X-100 in PBS for 10 min. After blocking with 5% normal goat serum for 2 h at room temperature, primary antibody incubations were performed in 1% goat serum in PBS overnight at 4 °C, followed by incubation in a secondary antibody cocktail of Alexa Fluor 488, 594, and DAPI (Thermo Fisher Scientific, NSW) for 2 h at room temperature. Cells were viewed using a 40× or a 63× dry objective on a DMI6500B confocal microscope (Leica, Mannheim, Germany). ImageJ 1.46r with NeuriteQuant add-in was used for morphological analysis. Quantification of neurite numbers is done be averaging the number of neurites per cell in the observed area from all the samples collected. The software add-in can calculate the numbers automatically.
After electrical stimulation, cells were harvested with lysis buffer (containing NP40, Protease Inhibitor Cocktail, 1 mM PMSF and 0.5 mM β-glycerophosphate). Total protein concentrations were determined by BCA Assay (Thermo Fisher Scientific, NSW), and detected using a SpectraMax Plus384 absorbance microplate reader (Molecular Devices, Sunnyvale, CA). Samples were heat-treated in Laemmli buffer at 95 oC, loaded to 8% SDS-PAGE gels for fractionation, and then transferred onto Immun-BlotTM PVDF membranes (Bio-Rad, Hercules, CA). The block consisted of 5% BSA in TBST. The membranes were then incubated with synaptophysin, PSD95 (Thermo Fisher Scientific, NSW; dilution factor 1:1000), and PSA-NCAM (Thermo Fisher Scientific, NSW; dilution factor 1:1000) antibodies in TBST containing 1% BSA overnight at 4 oC. Secondary antibodies were anti-rabbit IgG conjugated with horseradish peroxidase (Santa Cruz Biotechnology, Santa Cruz, CA; dilution factor 1:5000). For visualization, ECL detection reagents were exposed on the GelDoc System (Bio-Rad, Hercules, CA). Images were analysed using ImageJ 1.46r software (NIH, USA).
The RT-qPCR protocol was adopted from our previous work5,22. Briefly, total RNA was extracted using the PureLink RNA extraction kit (Thermo Fisher Scientific, NSW) according to the manufacturer’s protocol. First-strand cDNA was synthesized with the VILO cDNA synthesis kit (Thermo Fisher Scientific, NSW) with 20 μL reaction volume. qRT-PCR was carried out in triplicate using SYBR Select Master mix (Thermo Fisher Scientific, NSW) on a C1000 Touch Thermal Cycler coupled with CFX96 Real-Time System (Bio-Rad, Hercules, CA). The results were normalized to mouse GAPDH, and were expressed as fold different from controls. The primers for the target genes (Synaptophysin, PSD95, NCAM) as well as internal control (GAPDH) are detailed in Supplementary Material.
SPSS (version 15; Chicago, IL) was used for statistical analysis. One-way analysis of variance (ANOVA) or two-way ANOVAs with post-hoc Tukey’s tests were performed for multiple comparisons. Data were expressed as mean ± SEM, and p < 0.05 was considered statistically significant.
Electrochemical properties of the PPy.DBSA coated electrodes
The 3D interdigitated electrodes (Fig. 1) were cleaned by sonication in acetone and deionized water. Polypyrrole (PPy) was deposited on the electrode using electropolymerization induced at a constant potential. Figure 3D shows a characteristic chronoamperogram obtained during PPy growth. The initial increase in current with time is indicative of polymer deposition with increasing surface area of the electrode developing with time.
Figure 3A,B shows the cyclic voltammograms obtained in PBS using the 3D coated electrodes with or without collagen. As expected, a redox couple appeared at around −0.6 V and −0.4 V, and this can be attributed to PPy oxidation and reduction23. Here the DBS ions are not directly involved in the redox process because the dopant anion is trapped inside the polymer matrix24, and so charge balance is achieved through ingress and egress of cations. The Nyquist plot obtained for these electrodes exhibited a compressed semicircle in the high frequency region and a line in the low frequency region (Fig. 3C), with low charge transfer resistance (~2.5 Ω, diameter of the semicircle).
Two interdigitated 3D electrodes were assembled into a device and filled with collagen (without living cells). The device was then subjected to a charge-balanced biphasic 250 Hz pulsed current stimulation25. Figure 3D shows a representative chronoamperograms for Ppy growth on the 3D electrode, while Fig. 3E shows a representative example of the resulting voltage waveform when biphasic current pulses were applied to PPy coated on 3D electrodes. The results obtained indicate that the collagen media is capable of providing sufficient ionic conductivity to allow efficient charge transfer during current pulsing.
3D electrical stimulation improved neurite growth in wild-type and NRG1-KO mice
We have previously reported that electrical stimulation using PPy.DBSA as an electrode conduit can improve neurite growth in 2D10. To confirm this effect in 3D, we used the same stimulation regime (1 ± 0.25 mA/cm2 stimulated over 8 h/day for 3 consecutive days) and culture conditions, but conducted the electrical stimulation on primary neurons encapsulated in 3D collagen gels, and stimulated with our 3D interdigitated electrodes.
As shown in Fig. 4, both the neurite length and number of neurites was significantly reduced in NRG1-KO neurons compared to those from wildtype in a 3D culture (P < 0.01 and P < 0.05, respectively). As expected, these reductions were rescued by 3D electrical stimulation with PPy.DBSA (P < 0.01 and P < 0.05, respectively).
Interestingly, when electrical stimulation was induced in 3D structures, cell aggregates and neurite bundles were observed, which is significantly different from non-stimulated cells (Fig. 4A,D). These effects were not observed in previous studies using 2D cultures10.
3D electrical stimulation improved expression of markers for synaptogenesis
Western blotting revealed that protein expression of the pre-synaptic marker synaptophysin and the post-synaptic marker PSD95 was decreased in 3D neuronal cultures of NRG1-KO mice, as compared to those from wildtype. Interestingly, 3D electrical stimulation with PPy.DBSA increased protein expression of these markers (Fig. 5), hence preventing the reduction of synaptogenesis induced by NRG1-KO.
Similarly, results from RT-qPCR suggested that mRNA levels of synaptophysin and PSD95 was decreased in NRG1-KO 3D neuronal cultures, as compared to their wildtype counterparts. These reductions were rescued by 3D electrical stimulation (Fig. 5).
3D electrical stimulation improved neural cell aggregation
Immunofluorescence of MAP2 antibody revealed that 3D electrical stimulation can lead to cell aggregation, demonstrated with the increased number of cells per aggregate (Fig. 4). There was no significant difference between the different genotypes in cell aggregation. The effect of 3D electrical stimulation on cell aggregation was confirmed by western blotting of a cell aggregation marker (NCAM), which revealed that although PSA-NCAM was reduced by NRG1-KO, 3D stimulation had increased the protein expression of this marker to a level even higher than the wild-type control (Fig. 5). Similar effects were also observed in mRNA levels of NCAM illustrated by RT-qPCR (Fig. 5).
Comparison between 2D and 3D culture
In order to provide a concise comparison between 2D and 3D culture under electrical stimulation, we used immunofluorescence of MAP2 to reveal the morphological differences between the two systems. As shown in Fig. 6A, electrical stimulation on 2D cell culture did not promote cell aggregation, as we have previously shown in our past publication10; while electrical stimulation on 3D cell culture promote cell aggregation, and the neurites from the same cell aggregate tended to form bundles before projecting to a neighbouring aggregate (Fig. 6B).
To the best of the authors’ knowledge, this is the first report demonstrating the effect of 3D electrical stimulation on neurite outgrowth in primary neural cultures from both normal and disease models of schizophrenia. The morphological data from immunofluorescence of MAP2, as well as the protein and mRNA expression data suggest that the 3D primary neuronal cultures established in the present study represent the disease phenotype of schizophrenia as we observed previously in 2D2,10, while providing extra biological insights in terms of cell aggregation and 3D neurite outgrowth (Figs 4A,D and 5).
Additive fabrication, commonly known as 3D printing, is a layer by layer production method that is enabling advances in both research and industry. Additive fabrication allows for design flexibility that cannot be readily achieved through conventional manufacturing processes. Objet Polyjet technology (Stratasys, USA) enables the production of components from UV curable polymers with layer resolution of 16 µm. Selective Laser Melting (SLM) is a metal-based additive technique with layer resolution of 25 µm. This process controls the application of a focussed high energy laser to a levelled bed of metal powder, elevating the temperature of the powder beyond its melting point at discrete locations to form dense welds, and is ideally suited to the production of complex electrode geometries.
The interdigitated 3D electrode allowed for electrical stimulation to be conducted through the 3D collagen cell culture. The electrochemistry characterization tests (Fig. 3) revealed that the electrochemistry properties of the interdigitated 3D electrodes were as expected. This is critical for the evaluation of biological effects of stimulation via these electrodes. Moreover, the technique of 3D electrical stimulation in collagen-encapsulated cell culture enables the evaluation of electrical stimulation in an environment more closely aligned with the in vivo environment, allowing for free movement of cells and neurite growth within the 3D hydrogel without the restriction of 2D substrates26,27. Without the restriction of movement, the cells in 3D developed aggregates and neurite bundles, indicating enhanced movement of cells and improved communication. The main advantage of this system is that it is a REDOT driven stimulation system by putting the electrodes into real contact with the cells in 3D (not merely an electric field effect, as in the 2D electrode systems used in our and others’ previous studies6,8,10). With minimum optimization, this system could be translated into clinical settings as a possible treatment option for patients with developmental mental illness (such as schizophrenia).
The results of neurite outgrowth in the present study suggest that this 3D primary neuronal culture is a reliable in vitro model of the disease model of neurite outgrowth deficit derived from the primary cultures of the NRG1-KO mice. This was evaluated by the morphological study, as well as the protein and mRNA expressions of the pre-synaptic and post-synaptic markers synaptophysin and PSD95, respectively.
NRG1-KO is regarded as one of the key genetic susceptibility factors for neurodevelopmental deficits in schizophrenia and related disorders28. In the present study, both neurite length and number of neurites are reduced by NRG1-KO compared to the wild-type, which is consistent with our previous findings in 2D cell culture of these neuronal cells2,10. Similarly, the protein and mRNA expressions of synaptophysin and PSD95 were also reduced by NRG1-KO in 3D cell culture as compared to wild type. These deficits were rescued by 3D electrical stimulation with the biocompatible conducting polymer PPy.DBSA, indicating that this 3D primary cell culture platform can not only be used as a platform to mimic the biological functions as well as morphological changes in NRG1-KO models of deficits in neurite outgrowth and synaptogenesis, but it can also be used as a testing system for the effect of 3D electrical stimulation on this disease model.
The expression of NCAM in the brain is important in the regulation of many neurodevelopmental processes, including cell-cell adhesion, neurite outgrowth, and synaptic plasticity29. PSA-NCAM expression was reduced in layers IV and V of dorsolateral prefrontal cortex in schizophrenia patients compared to the control30. Moreover, NCAM-null mice have defected mossy fibre laminations31. It has been suggested that decreased PSA-NCAM may be indicative of a diminished capacity for synaptic plasticity and remodelling in schizophrenia32. In the present study, PSA-NCAM protein and mRNA expression was found to be decreased in primary PFC neuronal cultures of NRG1-KO mice compared to wildtype, supporting the aforementioned hypothesis. In addition, 3D electrical stimulation increased the expression of PSA-NCAM to a level that was significantly higher than the non-stimulated wildtype neurons. Since biosynthesis of PSA-NCAM is regulated by cell activation such as electrical activity in axons33, the increased expression of PSA-NCAM under 3D electrical stimulation observed in the present study may be due to the increased electrical activity of axons of these neurons triggered by electrical stimulation. This needs to be further investigated in future studies.
NCAM and PSA-NCAM have also been suggested to interact with a number of molecules and signalling pathways including BDNF-TrkB signalling. Decreased BDNF signalling mediates PSA-dependent defects in long-term potentiation34. We have previously reported that BDNF signalling was downregulated in primary neuronal cultures of NRG1-KO mice, but rescued by electrical stimulation. Therefore, the interaction between PSA-NCAM and BDNF signalling may play an important role in mediating the effect of electrical stimulation in promoting neurite outgrowth and synaptic plasticity as observed in the present study.
Finally, the increase in expression of pre- and post-synaptic markers can merely be a result of enhanced cells interactions, which results from their aggregation, although we have observed similar effects in our 2D experiments without the presence of cell aggregation. Further study is required to isolate the effect of aggregation and direct effect of electrical stimulation. For example, a cell aggregation inhibitor might be added to the culture media to halt the aggregation during electrical stimulation. The delivery of electrical stimulation by the 3D interdigitated electrode system in 3D cell culture provides a synergistic effect of 3D cell culture and 3D electrical stimulation. Future studies are warranted to investigate the unique attributes of the two. Due to limited tissue availability, this project only provides a proof of concept for the 3D electrical stimulation effects on neurite growth based on our previously tested electrical stimulation parameter. Further studies to test the various effects of electrical stimulation from this device based on various stimulation parameters are also warranted.
In conclusion, the interdigitated 3D electrodes enable the delivery of electrical stimulation though the 3D primary cell culture encapsulated in the collagen gels, which represented the morphological and molecular biological characteristics of the neurite deficits and synaptic deficits in the NRG1-KO model in vitro. This 3D electrical stimulation system provides a platform for rescuing the neurite outgrowth deficits in a 3D culturing environment, one similar to the in vivo biological system. The observation of cell aggregates as well as the upregulated PSA-NCAM protein and transcript expression suggest a possible pathway which may play an important role in the effect of 3D electrical stimulation in prompting neurite outgrowth and synaptic plasticity. Although further studies confirming the exact mechanism of 3D electrical stimulation on these effects are required, this study provides a new concept for not only a possible diagnostic platform for neurite deficits in neurodevelopmental diseases such as schizophrenia, but also a viable platform to test various treatment options (such as drug delivery through the gel or on the surface of the 3D electrodes) in combination with electrical stimulation or on its own. It also challenges the validity of 2D studies in this area.
Rae, C. L. et al. Deficits in neurite density underlie white matter structure abnormalities in first-episode psychosis. Biological Psychiatry, https://doi.org/10.1016/j.biopsych.2017.02.008 (2017).
Zhang, Q., Yu, Y. & Huang, X.-F. Olanzapine Prevents the PCP-induced Reduction in the Neurite Outgrowth of Prefrontal Cortical Neurons via NRG1. Scientific Reports 6, 19581, https://doi.org/10.1038/srep19581 (2016).
Millan, M. J. et al. Altering the course of schizophrenia: progress and perspectives. Nat Rev Drug Discov 15, 485–515, https://doi.org/10.1038/nrd.2016.28 (2016).
Nasrallah, H. A. Atypical antipsychotic-induced metabolic side effects: insights from receptor-binding profiles. Mol Psychiatry 13, 27–35 (2008).
Zhang, Q. et al. Hypothalamic ghrelin signalling mediates olanzapine-induced hyperphagia and weight gain in female rats. International Journal of Neuropsychopharmacology 17, 807–818, https://doi.org/10.1017/S1461145713001697 (2014).
Koppes, A. N. et al. Robust neurite extension following exogenous electrical stimulation within single walled carbon nanotube-composite hydrogels. Acta Biomaterialia 39, 34–43, https://doi.org/10.1016/j.actbio.2016.05.014 (2016).
Chang, Y.-J., Hsu, C.-M., Lin, C.-H., Lu, M. S.-C. & Chen, L. Electrical stimulation promotes nerve growth factor-induced neurite outgrowth and signaling. Biochimica et Biophysica Acta (BBA) - General Subjects 1830, 4130–4136, https://doi.org/10.1016/j.bbagen.2013.04.007 (2013).
Koppes, A. N. et al. Neurite outgrowth on electrospun PLLA fibers is enhanced by exogenous electrical stimulation. Journal of Neural Engineering 11, 046002 (2014).
Richard, J. M. Patterned and functionalized nanofiber scaffolds in three-dimensional hydrogel constructs enhance neurite outgrowth and directional control. Journal of Neural Engineering 11, 066009 (2014).
Zhang, Q. et al. Electrical Stimulation Using Conductive Polymer Polypyrrole Counters Reduced Neurite Outgrowth of Primary Prefrontal Cortical Neurons from NRG1-KO and DISC1-LI Mice. Scientific Reports 7, 42525, https://doi.org/10.1038/srep42525 (2017).
Stewart, E. M., Wu, Z., Huang, X. F., Kapsa, R. M. I. & Wallace, G. G. Use of conducting polymers to facilitate neurite branching in schizophrenia-related neuronal development. Biomaterials Science 4, 1244–1251, https://doi.org/10.1039/C6BM00212A (2016).
Stewart, E. et al. Electrical Stimulation Using Conductive Polymer Polypyrrole Promotes Differentiation of Human Neural Stem Cells: A Biocompatible Platform for Translational Neural Tissue Engineering. Tissue Engineering Part C: Methods 21, 385–393, https://doi.org/10.1089/ten.tec.2014.0338 (2015).
Xiang, Z., Liu, J. & Lee, C. A flexible three-dimensional electrode mesh: An enabling technology for wireless brain–computer interface prostheses. Microsystems & Nanoengineering 2, 16012, https://doi.org/10.1038/micronano.2016.12 (2016).
Choi, S. H. et al. In Stem Cell Technologies in Neuroscience (eds Amit K. Srivastava, Evan Y. Snyder, & Yang D. Teng) 1–18 (Springer New York, 2017).
Espuny-Camacho, I. et al. Hallmarks of Alzheimer’s Disease in Stem-Cell-Derived Human Neurons Transplanted into Mouse Brain. Neuron 93, 1066–1081.e1068, https://doi.org/10.1016/j.neuron.2017.02.001 (2017).
Haishuang, L., Qiang, L. & Yuguo, L. Three-dimensional tissues using human pluripotent stem cell spheroids as biofabrication building blocks. Biofabrication 9, 025007 (2017).
Zhao, C. et al. Three dimensional (3D) printed electrodes for interdigitated supercapacitors. Electrochemistry Communications 41, 20–23, https://doi.org/10.1016/j.elecom.2014.01.013 (2014).
Stefansson, H. et al. Neuregulin 1 and susceptibility to schizophrenia. Am J Hum Genet 71, 877–892, https://doi.org/10.1086/342734 (2002).
Australian Government National Health and Medical Research Council. Australian Code of Practice for the Care and Use of Animals for Scientific Purposes (seventh ed.). Canberra: Australian Government (2004).
Hilgenberg, L. G. & Smith, M. A. Preparation of dissociated mouse cortical neuron cultures. J Vis Exp, 562, https://doi.org/10.3791/562 (2007).
Richardson, R. T. et al. The effect of polypyrrole with incorporated neurotrophin-3 on the promotion of neurite outgrowth from auditory neurons. Biomaterials 28, 513–523, https://doi.org/10.1016/j.biomaterials.2006.09.008 (2007).
Zhang, Q. et al. Olanzapine reduced brown adipose tissue thermogenesis and locomotor activity in female rats. Progress in Neuro-Psychopharmacology and Biological Psychiatry 51, 172–180, https://doi.org/10.1016/j.pnpbp.2014.02.003 (2014).
Warren, L. F. & Anderson, D. P. Polypyrrole Films from Aqueous Electrolytes: The Effect of Anions upon Order. Journal of The Electrochemical Society 134, 101–105, https://doi.org/10.1149/1.2100383 (1987).
Vidanapathirana, K. P., Careem, M. A., Skaarup, S. & West, K. Ion movement in polypyrrole/dodecylbenzenesulphonate films in aqueous and non-aqueous electrolytes. Solid State Ionics 154, 331–335, https://doi.org/10.1016/S0167-2738(02)00530-1 (2002).
Xiao, L., Kerry, J. G., Simon, E. M. & Gordon, G. W. Electrical stimulation promotes nerve cell differentiation on polypyrrole/poly (2-methoxy-5 aniline sulfonic acid) composites. Journal of Neural Engineering 6, 065002 (2009).
Lee, J., Cuddihy, M. J. & Kotov, N. A. Three-Dimensional Cell Culture Matrices: State of the Art. Tissue Engineering Part B: Reviews 14, 61–86, https://doi.org/10.1089/teb.2007.0150 (2008).
Edelman, D. B. & Keefer, E. W. A cultural renaissance: in vitro cell biology embraces three-dimensional context. Experimental Neurology 192, 1–6, https://doi.org/10.1016/j.expneurol.2004.10.005 (2005).
Jaaro-Peled, H. et al. Neurodevelopmental mechanisms of schizophrenia: understanding disturbed postnatal brain maturation through neuregulin-1-ErbB4 and DISC1. Trends Neurosci 32, 485–495, https://doi.org/10.1016/j.tins.2009.05.007 (2009).
Barbeau, D., Liang, J. J., Robitalille, Y., Quirion, R. & Srivastava, L. K. Decreased expression of the embryonic form of the neural cell adhesion molecule in schizophrenic brains. Proceedings of the National Academy of Sciences of the United States of America 92, 2785–2789 (1995).
Gilabert-Juan, J. et al. Alterations in the expression of PSA-NCAM and synaptic proteins in the dorsolateral prefrontal cortex of psychiatric disorder patients. Neuroscience Letters 530, 97–102, https://doi.org/10.1016/j.neulet.2012.09.032 (2012).
Cremer, H., Chazal, G., Goridis, C. & Represa, A. NCAM Is Essential for Axonal Growth and Fasciculation in the Hippocampus. Molecular and Cellular Neuroscience 8, 323–335, https://doi.org/10.1006/mcne.1996.0588 (1997).
Eastwood, S. L. The Synaptic Pathology of Schizophrenia: Is Aberrant Neurodevelopment and Plasticity to Blame? International Review of Neurobiology 59, 47–72, https://doi.org/10.1016/S0074-7742(04)59003-7 (2004).
Fiszbein, A., Schor, I. E. & Kornblihtt, A. R. In Neural Surface Antigens 131–140 (Academic Press, 2015).
Muller, D. et al. Brain-derived neurotrophic factor restores long-term potentiation in polysialic acid-neural cell adhesion molecule-deficient hippocampus. Proceedings of the National Academy of Sciences 97, 4315–4320, https://doi.org/10.1073/pnas.070022697 (2000).
This work has been supported by the Australian Research Council (ARC) through an ARC Laureate Fellowship towards Professor Gordon Wallace (FL110100196). Funding from the Australian Research Council Centre of Excellence Scheme (Project Number CE 140100012) is gratefully acknowledged. The authors also acknowledge the Australian National Fabrication Facility (ANFF) for access to design software and additive fabrication capabilities. We thank Dr. Kerry Gilmore for proof-reading the final version of the manuscript.
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Zhang, Q., Beirne, S., Shu, K. et al. Electrical Stimulation with a Conductive Polymer Promotes Neurite Outgrowth and Synaptogenesis in Primary Cortical Neurons in 3D. Sci Rep 8, 9855 (2018). https://doi.org/10.1038/s41598-018-27784-5
Enhancing the Conductivity of Cell-Laden Alginate Microfibers With Aqueous Graphene for Neural Applications
Frontiers in Materials (2020)
Biomedical Materials (2019)
Photoconductive Micro/Nanoscale Interfaces of a Semiconducting Polymer for Wireless Stimulation of Neuron-Like Cells
ACS Applied Materials & Interfaces (2019)
Low-dose Dexamethasone Increases Autophagy in Cerebral Cortical Neurons of Juvenile Rats with Sepsis Associated Encephalopathy